Skip to contentSkip to conversation

libxl memkb & pt defaulting

PATCH Superseded Ian Jackson 10 participants 31 messages Oct 10, 2019 – Nov 25, 2019

v2 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v2 cover libxl memkb & pt defaulting

This is v2 of my series to sort out the shadow/iommu memory and pci passthrough situation. I think this series will mask the bug which is currently blocking staging propagating to master.

I had some difficulty testing this, as the test box under my desk doesn't do PT and I didn't want to wait to book one out from the test lab. So I have executed only some of the new code in libxl.

I would really appreciate review by a hypervisor expert on the main chunk of new code in libxl added in patch 9, which is where all the logic related to passthrough enabling and mode now resides.

am 1 libxl: Offer API versions 0x040700 and 0x040800
r 2 xl: Pass libxl_domain_config to freemem(), instead of b_info r* 3 libxl: libxl__domain_config_setdefault: New function r* 4 libxl: libxl_domain_need_memory: Make it take a domain_config
* 5 libxl: Move shadow_memkb and iommu_memkb defaulting into libxl
a 6 libxl: Remove/deprecate libxl_get_required_*_memory from the API
+ 7 libxl: create: setdefault: Make libxl_physinfo info[1]
+ 8 libxl: create: setdefault: Move physinfo into config_setdefault
+ 9 libxl/xl: Overhaul passthrough setting logic

a=acked; r=reviewed; m=message changed; *=patch changed; +=new patch

 tools/libxl/libxl.h          |  24 +++++-
 tools/libxl/libxl_create.c   | 174 ++++++++++++++++++++++++++++++++++---------
 tools/libxl/libxl_dm.c       |   7 +-
 tools/libxl/libxl_dom.c      |   7 +-
 tools/libxl/libxl_internal.h |  13 +++-
 tools/libxl/libxl_mem.c      |  69 +++++++++++++----
 tools/libxl/libxl_types.idl  |   5 +-
 tools/libxl/libxl_utils.c    |  15 ----
 tools/libxl/libxl_utils.h    |   2 +-
 tools/xl/xl_parse.c          |  82 ++------------------
 tools/xl/xl_vmcontrol.c      |   6 +-
 11 files changed, 254 insertions(+), 150 deletions(-)
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#1 lore raw

PATCH v2 1/9 libxl: Offer API versions 0x040700 and 0x040800

According to git log -G:

0x040700 was introduced in 304400459ef0 (aka 4.7.0-rc1~481)
"tools/libxl: rename remus device to checkpoint device"

0x040800 was introduced in 57f8b13c7240 (aka 4.8.0-rc1~437)
"libxl: memory size in kb requires 64 bit variable"

It is surprising that no-one noticed this.

Anyway, in the meantime, we should fix it. Backporting this is probably a good idea: it won't change the behaviour for existing callers but it will avoid errors for some older correct uses.

---
v2: Adjusted commit message slightly.

---
 tools/libxl/libxl.h | 1 +
 1 file changed, 1 insertion(+)
tools/libxl/libxl.h +1 -0
index 2555e9cd3b..518fc9e47f 100644
@@ -655,6 +655,7 @@ typedef struct libxl__ctx libxl_ctx;
 #ifdef LIBXL_API_VERSION
 #if LIBXL_API_VERSION != 0x040200 && LIBXL_API_VERSION != 0x040300 && \
     LIBXL_API_VERSION != 0x040400 && LIBXL_API_VERSION != 0x040500 && \
+    LIBXL_API_VERSION != 0x040700 && LIBXL_API_VERSION != 0x040800 && \
     LIBXL_API_VERSION != 0x041300
 #error Unknown LIBXL_API_VERSION
 #endif
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#2 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 1/9] libxl: Offer API versions 0x040700 and 0x040800

Quoted 9 lines · Ian Jackson

According to git log -G:

0x040700 was introduced in 304400459ef0 (aka 4.7.0-rc1~481)
"tools/libxl: rename remus device to checkpoint device"

0x040800 was introduced in 57f8b13c7240 (aka 4.8.0-rc1~437)
"libxl: memory size in kb requires 64 bit variable"

It is surprising that no-one noticed this.

I am now noticing it :-(.

As Anthony noted in V1, libvirt uses LIBXL_API_VERSION and currently has it set to 0x040500. I'm attempting to bump libvirt's minimum supported Xen version to 4.9.0 and for that would use 0x040800, but it's not possible without this commit backported through 4.9 and picked up and released by all the downstreams.

Any ideas on how to use the APIs changes through 0x040800, but avoid the ones introduced in 0x041300 would be much appreciated.

Regards,
Jim
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#3 lore raw

PATCH v2 2/9 xl: Pass libxl_domain_config to freemem(), instead of b_info

In reply to Ian Jackson

We are going to change the libxl API in a moment and this change will make it simpler.

---
 tools/xl/xl_vmcontrol.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/xl/xl_vmcontrol.c +3 -3
index b20582e15b..d33c6b38c9 100644
@@ -314,7 +314,7 @@ static int domain_wait_event(uint32_t domid, libxl_event **event_r)
  * Returns true in case there is already, or we manage to free it, enough
  * memory, but also if autoballoon is false.
  */
-static bool freemem(uint32_t domid, libxl_domain_build_info *b_info)
+static bool freemem(uint32_t domid, libxl_domain_config *d_config)
 {
     int rc, retries = 3;
     uint64_t need_memkb, free_memkb;
@@ -322,7 +322,7 @@ static bool freemem(uint32_t domid, libxl_domain_build_info *b_info)
     if (!autoballoon)
         return true;
 
-    rc = libxl_domain_need_memory(ctx, b_info, &need_memkb);
+    rc = libxl_domain_need_memory(ctx, &d_config->b_info, &need_memkb);
     if (rc < 0)
         return false;
 
@@ -879,7 +879,7 @@ start:
         goto error_out;
 
     if (domid_soft_reset == INVALID_DOMID) {
-        if (!freemem(domid, &d_config.b_info)) {
+        if (!freemem(domid, &d_config)) {
             fprintf(stderr, "failed to free memory for the domain\n");
             ret = ERROR_FAIL;
             goto error_out;
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#4 lore raw

PATCH v2 3/9 libxl: libxl__domain_config_setdefault: New function

In reply to Ian Jackson

Break out this into a new function. We are going to want to call it from a new call site.

Unfortunately not all of the defaults can be moved into the new function without changing the order in which things are done. That does not seem wise at this stage of the release. The effect is that additional calls to libxl__domain_config_setdefault (which are going to be introduced) do not quite set everything. But they will do what is needed. After Xen 4.13 is done, we should move those settings into the right order.

No functional change.

---
v2: Add missing error check

---
 tools/libxl/libxl_create.c   | 41 +++++++++++++++++++++++++++++------------
 tools/libxl/libxl_internal.h |  3 +++
 2 files changed, 32 insertions(+), 12 deletions(-)
tools/libxl/libxl_create.c +29 -12
index 099761a2d7..fd8bb22be9 100644
@@ -862,22 +862,14 @@ static void domcreate_destruction_cb(libxl__egc *egc,
                                      libxl__domain_destroy_state *dds,
                                      int rc);
 
-static void initiate_domain_create(libxl__egc *egc,
-                                   libxl__domain_create_state *dcs)
+int libxl__domain_config_setdefault(libxl__gc *gc,
+                                    libxl_domain_config *d_config,
+                                    uint32_t domid)
 {
-    STATE_AO_GC(dcs->ao);
     libxl_ctx *ctx = libxl__gc_owner(gc);
-    uint32_t domid;
-    int i, ret;
+    int ret;
     bool pod_enabled = false;
 
-    /* convenience aliases */
-    libxl_domain_config *const d_config = dcs->guest_config;
-    const int restore_fd = dcs->restore_fd;
-
-    domid = dcs->domid_soft_reset;
-    libxl__domain_build_state_init(&dcs->build_state);
-
     if (d_config->c_info.ssid_label) {
         char *s = d_config->c_info.ssid_label;
         ret = libxl_flask_context_to_sid(ctx, s, strlen(s),
@@ -1008,6 +1000,28 @@ static void initiate_domain_create(libxl__egc *egc,
         goto error_out;
     }
 
+    ret = 0;
+ error_out:
+    return ret;
+}
+
+static void initiate_domain_create(libxl__egc *egc,
+                                   libxl__domain_create_state *dcs)
+{
+    STATE_AO_GC(dcs->ao);
+    uint32_t domid;
+    int i, ret;
+
+    /* convenience aliases */
+    libxl_domain_config *const d_config = dcs->guest_config;
+    const int restore_fd = dcs->restore_fd;
+
+    domid = dcs->domid_soft_reset;
+    libxl__domain_build_state_init(&dcs->build_state);
+
+    ret = libxl__domain_config_setdefault(gc,d_config,domid);
+    if (ret) goto error_out;
+
     ret = libxl__domain_make(gc, d_config, &dcs->build_state, &domid);
     if (ret) {
         LOGD(ERROR, domid, "cannot make domain: %d", ret);
@@ -1019,6 +1033,9 @@ static void initiate_domain_create(libxl__egc *egc,
     dcs->guest_domid = domid;
     dcs->sdss.dm.guest_domid = 0; /* means we haven't spawned */
 
+    /* post-4.13 todo: move these next bits of defaulting to
+     * libxl__domain_config_setdefault */
+
     /*
      * Set the dm version quite early so that libxl doesn't have to pass the
      * build info around just to know if the domain has a device model or not.
tools/libxl/libxl_internal.h +3 -0
index d2d5af746b..50ac7b64ed 100644
@@ -1440,6 +1440,9 @@ _hidden int libxl__resolve_domid(libxl__gc *gc, const char *name,
  *     All libxl API functions are expected to have arranged for this
  *     to be called before using any values within these structures.
  */
+_hidden int libxl__domain_config_setdefault(libxl__gc *gc,
+                                            libxl_domain_config *d_config,
+                                            uint32_t domid /* logging only */);
 _hidden int libxl__domain_create_info_setdefault(libxl__gc *gc,
                                         libxl_domain_create_info *c_info);
 _hidden int libxl__domain_build_info_setdefault(libxl__gc *gc,
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#5 lore raw

PATCH v2 4/9 libxl: libxl_domain_need_memory: Make it take a domain_config

In reply to Ian Jackson

This should calculate the extra memory needed for shadow and iommu, the defaults for which depend on values in c_info. So we need this to have the complete domain config available.

And the defaults should actually be updated and stored. So make it non-const.

We provide the usual kind of compatibility function for callers expecting 4.12 and earlier. This function becomes responsible for the clone-and-modify of the b_info.

No overall functional change for external libxl callers which use the API version system to request a particular API version.

Other external libxl callers will need to update their calling code, and will then find that the new version of this function fills in most of the defaults in d_config. Because libxl__domain_config_setdefault doesn't quite do all of the defaults, that's only partial. For present purposes that doesn't matter because none of the missing settings are used by the memory calculations. It does mean we need to document in the API spec that the defaulting is only partial.

This lack of functional change is despite the fact that numa_place_domain now no longer calls libxl__domain_build_info_setdefault (via libxl_domain_need_memory). That is OK because it's idempotent and numa_place_domain's one call site is libxl__build_pre which is called from libxl__domain_build which is called from domcreate_bootloader_done, well after the defaults are set by initiate_domain_create.

---
v2: Drop now-erroneous GC_FREE as well as the corresponding GC_INIT.

---
 tools/libxl/libxl.h          | 23 +++++++++++++++-
 tools/libxl/libxl_dom.c      |  7 +++--
 tools/libxl/libxl_internal.h |  4 +++
 tools/libxl/libxl_mem.c      | 65 +++++++++++++++++++++++++++++++++++---------
 tools/xl/xl_vmcontrol.c      |  2 +-
 5 files changed, 83 insertions(+), 18 deletions(-)
tools/libxl/libxl.h +22 -1
index 518fc9e47f..49b56fa1a3 100644
@@ -1245,6 +1245,20 @@ void libxl_mac_copy(libxl_ctx *ctx, libxl_mac *dst, const libxl_mac *src);
  */
 #define LIBXL_HAVE_FN_USING_QMP_ASYNC 1
 
+/*
+ * LIBXL_HAVE_DOMAIN_NEED_MEMORY_CONFIG
+ *
+ * If this is set, libxl_domain_need_memory takes a
+ * libxl_domain_config* (non-const) and uint32_t domid_for_logging
+ * (instead of a const libxl_domain_build_info*).
+ *
+ * If this is set, there is no need to call
+ * libxl_get_required_shadow_memory and instead the caller should
+ * simply leave shadow_memkb set to LIBXL_MEMKB_DEFAULT and allow
+ * libxl to fill in a suitable default in the usual way.
+ */
+#define LIBXL_HAVE_DOMAIN_NEED_MEMORY_CONFIG
+
 typedef char **libxl_string_list;
 void libxl_string_list_dispose(libxl_string_list *sl);
 int libxl_string_list_length(const libxl_string_list *sl);
@@ -1723,8 +1737,13 @@ int libxl_get_memory_target_0x040700(libxl_ctx *ctx, uint32_t domid,
  */
 /* how much free memory in the system a domain needs to be built */
 int libxl_domain_need_memory(libxl_ctx *ctx,
-                             const libxl_domain_build_info *b_info_in,
+                             libxl_domain_config *config
+                             /* ^ will be partially defaulted */,
+                             uint32_t domid_for_logging /* INVALID_DOMID ok */,
                              uint64_t *need_memkb);
+int libxl_domain_need_memory_0x041200(libxl_ctx *ctx,
+                                      const libxl_domain_build_info *b_info_in,
+                                      uint64_t *need_memkb);
 int libxl_domain_need_memory_0x040700(libxl_ctx *ctx,
                                       const libxl_domain_build_info *b_info_in,
                                       uint32_t *need_memkb)
@@ -1754,6 +1773,8 @@ int libxl_wait_for_memory_target(libxl_ctx *ctx, uint32_t domid, int wait_secs);
 #define libxl_get_memory_target libxl_get_memory_target_0x040700
 #define libxl_domain_need_memory libxl_domain_need_memory_0x040700
 #define libxl_get_free_memory libxl_get_free_memory_0x040700
+#elif defined(LIBXL_API_VERSION) && LIBXL_API_VERSION < 0x041300
+#define libxl_domain_need_memory libxl_domain_need_memory_0x041200
 #endif
 
 int libxl_vncviewer_exec(libxl_ctx *ctx, uint32_t domid, int autopass);
tools/libxl/libxl_dom.c +4 -3
index c5685b061c..cdb294ab8d 100644
@@ -140,8 +140,9 @@ static int numa_cmpf(const libxl__numa_candidate *c1,
 
 /* The actual automatic NUMA placement routine */
 static int numa_place_domain(libxl__gc *gc, uint32_t domid,
-                             libxl_domain_build_info *info)
+                             libxl_domain_config *d_config)
 {
+    libxl_domain_build_info *info = &d_config->b_info;
     int found;
     libxl__numa_candidate candidate;
     libxl_bitmap cpumap, cpupool_nodemap, *map;
@@ -195,7 +196,7 @@ static int numa_place_domain(libxl__gc *gc, uint32_t domid,
         }
     }
 
-    rc = libxl_domain_need_memory(CTX, info, &memkb);
+    rc = libxl__domain_need_memory_calculate(gc, info, &memkb);
     if (rc)
         goto out;
     if (libxl_node_bitmap_alloc(CTX, &cpupool_nodemap, 0)) {
@@ -432,7 +433,7 @@ int libxl__build_pre(libxl__gc *gc, uint32_t domid,
             if (rc)
                 return rc;
 
-            rc = numa_place_domain(gc, domid, info);
+            rc = numa_place_domain(gc, domid, d_config);
             if (rc) {
                 libxl_bitmap_dispose(&cpumap_soft);
                 return rc;
tools/libxl/libxl_internal.h +4 -0
index 50ac7b64ed..01de5576d9 100644
@@ -1450,6 +1450,10 @@ _hidden int libxl__domain_build_info_setdefault(libxl__gc *gc,
 _hidden void libxl__rdm_setdefault(libxl__gc *gc,
                                    libxl_domain_build_info *b_info);
 
+_hidden int libxl__domain_need_memory_calculate(libxl__gc *gc,
+                                      libxl_domain_build_info *b_info,
+                                      uint64_t *need_memkb);
+
 _hidden const char *libxl__device_nic_devname(libxl__gc *gc,
                                               uint32_t domid,
                                               uint32_t devid,
tools/libxl/libxl_mem.c +52 -13

89 lines not on this page · raw message

tools/xl/xl_vmcontrol.c +1 -1
index d33c6b38c9..e520b1da79 100644
@@ -322,7 +322,7 @@ static bool freemem(uint32_t domid, libxl_domain_config *d_config)
     if (!autoballoon)
         return true;
 
-    rc = libxl_domain_need_memory(ctx, &d_config->b_info, &need_memkb);
+    rc = libxl_domain_need_memory(ctx, d_config, domid, &need_memkb);
     if (rc < 0)
         return false;
 
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#6 lore raw

PATCH v2 5/9 libxl: Move shadow_memkb and iommu_memkb defaulting into libxl

In reply to Ian Jackson

Defaulting is supposed to be done by libxl. So these calculations should be here in libxl. libxl__domain_config_setdefault has all the necessary information including the values of max_memkb and max_vcpus.

The overall functional effect depends on the caller:

For xl, no change. The code moves from xl to libxl.

For callers who set one or both shadow_memkb and iommu_memkb (whether from libxl_get_required_shadow_memory or otherwise) before calling libxl_domain_need_memory (any version): the new code will leave their setting(s) unchanged.

For callers who do not call libxl_domain_need_memory at all, and who fail to set one of these memory values: now they are both are properly set. The shadow and iommu memory to be properly accounted for as intended.

For callers which call libxl_domain_need_memory and request the current API (4.13) or which track libxl, the default values are also now right and everything works as intended.

For callers which call libxl_domain_need_memory, and request an old pre-4.13 libxl API, and which leave one of these memkb settings unset, we take special measures to preserve the old behaviour.

This means that they don't get the additional iommu memory and are at risk of the domain running out of memory as a result of f89f555827a6 "remove late (on-demand) construction of IOMMU page tables". But this is no worse than the state just after f89f555827a6, which already broke such callers in that way. This is perhaps justifiable because of the API stability warning next to libxl_domain_need_memory.

An alternative would be to drop the special-casing of these callers. That would cause a discrepancy between libxl_domain_need_memory and
libxl_domain_create: the former would not include the iommu memory and the latter would. That seems worse, but it's debateable.

---
v2: Replace _Bool with bool
v2: Fix logic sense in ok_to_default_memkb_in_create

---
 tools/libxl/libxl_create.c   | 40 ++++++++++++++++++++++++++++++++++++++++
 tools/libxl/libxl_internal.h |  3 +++
 tools/libxl/libxl_mem.c      |  4 ++++
 tools/xl/xl_parse.c          | 15 ++-------------
 4 files changed, 49 insertions(+), 13 deletions(-)
tools/libxl/libxl_create.c +40 -0
index fd8bb22be9..a1b00a8aef 100644
@@ -250,6 +250,7 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
     switch (b_info->type) {
     case LIBXL_DOMAIN_TYPE_HVM:
         if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
+            /* Normally defaulted in libxl__domain_create_info_setdefault */
             b_info->shadow_memkb = 0;
         if (b_info->u.hvm.mmio_hole_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->u.hvm.mmio_hole_memkb = 0;
@@ -395,6 +396,7 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
         if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->video_memkb = 0;
         if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
+            /* Normally defaulted in libxl__domain_create_info_setdefault */
             b_info->shadow_memkb = 0;
         if (b_info->u.pv.slack_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->u.pv.slack_memkb = 0;
@@ -862,6 +864,30 @@ static void domcreate_destruction_cb(libxl__egc *egc,
                                      libxl__domain_destroy_state *dds,
                                      int rc);
 
+static bool ok_to_default_memkb_in_create(libxl__gc *gc)
+{
+    /*
+     * This is a fudge.  We are trying to find whether the caller
+     * calls the old version of libxl_domain_need_memory.  If they do
+     * then, because it only gets the b_info, and because it can't
+     * update the b_info (because it's const), it will base its
+     * calculations on defaulting shadow_memkb and iommu_memkb to 0
+     * In that case we probably shouldn't default them differently
+     * during libxl_domain_create.
+     *
+     * The result is that the behaviour with old callers is the same
+     * as in 4.13: no additional memory is allocated for shadow and
+     * iommu (unless the caller set shadow_memkb, eg from a call to
+     * libxl_get_required_shadow_memory).
+     */
+    return !CTX->libxl_domain_need_memory_0x041200_called ||
+            CTX->libxl_domain_need_memory_called;
+    /*
+     * Treat mixed callers as new callers.  Presumably they know what
+     * they are doing.
+     */
+}
+
 int libxl__domain_config_setdefault(libxl__gc *gc,
                                     libxl_domain_config *d_config,
                                     uint32_t domid)
@@ -974,6 +1000,20 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
         goto error_out;
     }
 
+    if (d_config->b_info.shadow_memkb == LIBXL_MEMKB_DEFAULT
+        && ok_to_default_memkb_in_create(gc))
+        d_config->b_info.shadow_memkb =
+            libxl_get_required_shadow_memory(d_config->b_info.max_memkb,
+                                             d_config->b_info.max_vcpus);
+
+    /* No IOMMU reservation is needed if passthrough mode is not 'sync_pt' */
+    if (d_config->b_info.iommu_memkb == LIBXL_MEMKB_DEFAULT
+        && ok_to_default_memkb_in_create(gc))
+        d_config->b_info.iommu_memkb =
+            (d_config->c_info.passthrough == LIBXL_PASSTHROUGH_SYNC_PT)
+            ? libxl_get_required_iommu_memory(d_config->b_info.max_memkb)
+            : 0;
+
     ret = libxl__domain_build_info_setdefault(gc, &d_config->b_info);
     if (ret) {
         LOGD(ERROR, domid, "Unable to set domain build info defaults");
tools/libxl/libxl_internal.h +3 -0
index 01de5576d9..0185b8ff01 100644
@@ -637,6 +637,9 @@ struct libxl__ctx {
     LIBXL_LIST_ENTRY(libxl_ctx) sigchld_users_entry;
 
     libxl_version_info version_info;
+
+    bool libxl_domain_need_memory_0x041200_called,
+         libxl_domain_need_memory_called;
 };
 
 /*
tools/libxl/libxl_mem.c +4 -0
index 6042299393..7c01fac7e5 100644
@@ -484,6 +484,8 @@ int libxl_domain_need_memory(libxl_ctx *ctx,
     GC_INIT(ctx);
     int rc;
 
+    ctx->libxl_domain_need_memory_called = 1;
+
     rc = libxl__domain_config_setdefault(gc,
                                          d_config,
                                          domid_for_logging);
@@ -507,6 +509,8 @@ int libxl_domain_need_memory_0x041200(libxl_ctx *ctx,
     GC_INIT(ctx);
     int rc;
 
+    ctx->libxl_domain_need_memory_0x041200_called = 1;
+
     libxl_domain_build_info b_info[1];
     libxl_domain_build_info_init(b_info);
     libxl_domain_build_info_copy(ctx, b_info, b_info_in);
tools/xl/xl_parse.c +2 -13
index 03a2c54dd2..79871c22d0 100644
@@ -1572,19 +1572,8 @@ void parse_config_data(const char *config_source,
         exit(-ERROR_FAIL);
     }
 
-    /* libxl_get_required_shadow_memory() and
-     * libxl_get_required_iommu_memory() must be called after final values
-     * (default or specified) for vcpus and memory are set, because the
-     * calculations depend on those values. */
-    b_info->shadow_memkb = !xlu_cfg_get_long(config, "shadow_memory", &l, 0)
-        ? l * 1024
-        : libxl_get_required_shadow_memory(b_info->max_memkb,
-                                           b_info->max_vcpus);
-
-    /* No IOMMU reservation is needed if passthrough mode is not 'sync_pt' */
-    b_info->iommu_memkb = (c_info->passthrough == LIBXL_PASSTHROUGH_SYNC_PT)
-        ? libxl_get_required_iommu_memory(b_info->max_memkb)
-        : 0;
+    if (!xlu_cfg_get_long(config, "shadow_memory", &l, 0))
+        b_info->shadow_memkb = l * 1024;
 
     xlu_cfg_get_defbool(config, "nomigrate", &b_info->disable_migrate, 0);
 
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#7 lore raw

PATCH v2 6/9 libxl: Remove/deprecate libxl_get_required_*_memory from the API

In reply to Ian Jackson

These are now redundant because shadow_memkb and iommu_memkb are now defaulted automatically by libxl_domain_need_memory and libxl_domain_create etc. Callers should not now call these; instead, they should just let libxl take care of it.

libxl_get_required_shadow_memory was introduced in f89f555827a6
"remove late (on-demand) construction of IOMMU page tables"
We can freely remove it because it was never in any release.

libxl_get_required_shadow_memory has been in libxl approximately forever. It should probably not have survived the creation of libxl_domain_create, but it seems the API awkwardnesses we see in recent commits prevented this. So we have to keep it. It remains functional but we can deprecate it. Hopefully we can get rid of it completely before we find the need to change the calculation to use additional information which its arguments do not currently supply.

---
 tools/libxl/libxl_create.c | 17 ++++++++++++++++-
 tools/libxl/libxl_utils.c  | 15 ---------------
 tools/libxl/libxl_utils.h  |  2 +-
 3 files changed, 17 insertions(+), 17 deletions(-)
tools/libxl/libxl_create.c +16 -1
index a1b00a8aef..b394312d98 100644
@@ -888,6 +888,21 @@ static bool ok_to_default_memkb_in_create(libxl__gc *gc)
      */
 }
 
+static unsigned long libxl__get_required_iommu_memory(unsigned long maxmem_kb)
+{
+    unsigned long iommu_pages = 0, mem_pages = maxmem_kb / 4;
+    unsigned int level;
+
+    /* Assume a 4 level page table with 512 entries per level */
+    for (level = 0; level < 4; level++)
+    {
+        mem_pages = DIV_ROUNDUP(mem_pages, 512);
+        iommu_pages += mem_pages;
+    }
+
+    return iommu_pages * 4;
+}
+
 int libxl__domain_config_setdefault(libxl__gc *gc,
                                     libxl_domain_config *d_config,
                                     uint32_t domid)
@@ -1011,7 +1026,7 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
         && ok_to_default_memkb_in_create(gc))
         d_config->b_info.iommu_memkb =
             (d_config->c_info.passthrough == LIBXL_PASSTHROUGH_SYNC_PT)
-            ? libxl_get_required_iommu_memory(d_config->b_info.max_memkb)
+            ? libxl__get_required_iommu_memory(d_config->b_info.max_memkb)
             : 0;
 
     ret = libxl__domain_build_info_setdefault(gc, &d_config->b_info);
tools/libxl/libxl_utils.c +0 -15
index 405733b7e1..f360f5e228 100644
@@ -48,21 +48,6 @@ unsigned long libxl_get_required_shadow_memory(unsigned long maxmem_kb, unsigned
     return 4 * (256 * smp_cpus + 2 * (maxmem_kb / 1024));
 }
 
-unsigned long libxl_get_required_iommu_memory(unsigned long maxmem_kb)
-{
-    unsigned long iommu_pages = 0, mem_pages = maxmem_kb / 4;
-    unsigned int level;
-
-    /* Assume a 4 level page table with 512 entries per level */
-    for (level = 0; level < 4; level++)
-    {
-        mem_pages = DIV_ROUNDUP(mem_pages, 512);
-        iommu_pages += mem_pages;
-    }
-
-    return iommu_pages * 4;
-}
-
 char *libxl_domid_to_name(libxl_ctx *ctx, uint32_t domid)
 {
     unsigned int len;
tools/libxl/libxl_utils.h +1 -1
index 630ccbe28a..46918aea84 100644
@@ -24,7 +24,7 @@ const
 char *libxl_basename(const char *name); /* returns string from strdup */
 
 unsigned long libxl_get_required_shadow_memory(unsigned long maxmem_kb, unsigned int smp_cpus);
-unsigned long libxl_get_required_iommu_memory(unsigned long maxmem_kb);
+  /* deprecated; see LIBXL_HAVE_DOMAIN_NEED_MEMORY_CONFIG in libxl.h */
 int libxl_name_to_domid(libxl_ctx *ctx, const char *name, uint32_t *domid);
 int libxl_domain_qualifier_to_domid(libxl_ctx *ctx, const char *name, uint32_t *domid);
 char *libxl_domid_to_name(libxl_ctx *ctx, uint32_t domid);
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#8 lore raw

PATCH v2 7/9 libxl: create: setdefault: Make libxl_physinfo info[1]

In reply to Ian Jackson

No functional change. This will let us make it into a pointer without textual change other than to the definition.

While we are here, fix some style errors (missing { }).

---
v2: New patch in this version of the series.

---
 tools/libxl/libxl_create.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
tools/libxl/libxl_create.c +8 -8
index b394312d98..9c56a914ca 100644
@@ -30,10 +30,10 @@
 int libxl__domain_create_info_setdefault(libxl__gc *gc,
                                          libxl_domain_create_info *c_info)
 {
-    libxl_physinfo info;
+    libxl_physinfo info[1];
     int rc;
 
-    rc = libxl_get_physinfo(CTX, &info);
+    rc = libxl_get_physinfo(CTX, info);
     if (rc)
         return rc;
 
@@ -45,11 +45,11 @@ int libxl__domain_create_info_setdefault(libxl__gc *gc,
     libxl__arch_domain_create_info_setdefault(gc, c_info);
 
     if (c_info->type != LIBXL_DOMAIN_TYPE_PV) {
-        if (info.cap_hap)
+        if (info->cap_hap) {
             libxl_defbool_setdefault(&c_info->hap, true);
-        else if (info.cap_shadow)
+        } else if (info->cap_shadow) {
             libxl_defbool_setdefault(&c_info->hap, false);
-        else {
+        } else {
             LOG(ERROR, "neither hap nor shadow paging available");
             return ERROR_INVAL;
         }
@@ -63,12 +63,12 @@ int libxl__domain_create_info_setdefault(libxl__gc *gc,
     if (!c_info->ssidref)
         c_info->ssidref = SECINITSID_DOMU;
 
-    if (info.cap_hvm_directio &&
+    if (info->cap_hvm_directio &&
         (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN)) {
         c_info->passthrough = ((c_info->type == LIBXL_DOMAIN_TYPE_PV) ||
-                               !info.cap_iommu_hap_pt_share) ?
+                               !info->cap_iommu_hap_pt_share) ?
             LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
-    } else if (!info.cap_hvm_directio) {
+    } else if (!info->cap_hvm_directio) {
         c_info->passthrough = LIBXL_PASSTHROUGH_DISABLED;
     }
 
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Acked-by on v2 7/9
#9 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 7/9] libxl: create: setdefault: Make libxl_physinfo info[1]

Quoted 6 lines · Ian Jackson

No functional change. This will let us make it into a pointer without textual change other than to the definition.

While we are here, fix some style errors (missing { }).

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#10 lore raw

PATCH v2 8/9 libxl: create: setdefault: Move physinfo into config_setdefault

In reply to Ian Jackson

No functional change. This will let us refer to it in code we are about to add to this function.

---
v2: New patch in this version of the series.

---
 tools/libxl/libxl_create.c   | 17 ++++++++---------
 tools/libxl/libxl_dm.c       |  7 ++++++-
 tools/libxl/libxl_internal.h |  3 ++-
 3 files changed, 16 insertions(+), 11 deletions(-)
tools/libxl/libxl_create.c +8 -9
index 9c56a914ca..69971c97b6 100644
@@ -28,15 +28,9 @@
 #include <xen-xsm/flask/flask.h>
 
 int libxl__domain_create_info_setdefault(libxl__gc *gc,
-                                         libxl_domain_create_info *c_info)
+                                         libxl_domain_create_info *c_info,
+                                         const libxl_physinfo *info)
 {
-    libxl_physinfo info[1];
-    int rc;
-
-    rc = libxl_get_physinfo(CTX, info);
-    if (rc)
-        return rc;
-
     if (!c_info->type) {
         LOG(ERROR, "domain type unspecified");
         return ERROR_INVAL;
@@ -911,6 +905,10 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
     int ret;
     bool pod_enabled = false;
 
+    libxl_physinfo physinfo;
+    ret = libxl_get_physinfo(CTX, &physinfo);
+    if (ret) goto error_out;
+
     if (d_config->c_info.ssid_label) {
         char *s = d_config->c_info.ssid_label;
         ret = libxl_flask_context_to_sid(ctx, s, strlen(s),
@@ -1009,7 +1007,8 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
         goto error_out;
     }
 
-    ret = libxl__domain_create_info_setdefault(gc, &d_config->c_info);
+    ret = libxl__domain_create_info_setdefault(gc, &d_config->c_info,
+                                               &physinfo);
     if (ret) {
         LOGD(ERROR, domid, "Unable to set domain create info defaults");
         goto error_out;
tools/libxl/libxl_dm.c +6 -1
index c00356a2f1..e6a48974f8 100644
@@ -2167,7 +2167,12 @@ void libxl__spawn_stub_dm(libxl__egc *egc, libxl__stub_dm_spawn_state *sdss)
     dm_config->c_info.run_hotplug_scripts =
         guest_config->c_info.run_hotplug_scripts;
 
-    ret = libxl__domain_create_info_setdefault(gc, &dm_config->c_info);
+    libxl_physinfo physinfo;
+    ret = libxl_get_physinfo(CTX, &physinfo);
+    if (ret) goto out;
+
+    ret = libxl__domain_create_info_setdefault(gc, &dm_config->c_info,
+                                               &physinfo);
     if (ret) goto out;
     ret = libxl__domain_build_info_setdefault(gc, &dm_config->b_info);
     if (ret) goto out;
tools/libxl/libxl_internal.h +2 -1
index 0185b8ff01..6a614658c2 100644
@@ -1447,7 +1447,8 @@ _hidden int libxl__domain_config_setdefault(libxl__gc *gc,
                                             libxl_domain_config *d_config,
                                             uint32_t domid /* logging only */);
 _hidden int libxl__domain_create_info_setdefault(libxl__gc *gc,
-                                        libxl_domain_create_info *c_info);
+                                        libxl_domain_create_info *c_info,
+                                        const libxl_physinfo *info);
 _hidden int libxl__domain_build_info_setdefault(libxl__gc *gc,
                                         libxl_domain_build_info *b_info);
 _hidden void libxl__rdm_setdefault(libxl__gc *gc,
Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Acked-by on v2 8/9
#11 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 8/9] libxl: create: setdefault: Move physinfo into config_setdefault

Quoted 4 lines · Ian Jackson

No functional change. This will let us refer to it in code we are about to add to this function.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#12 lore raw

PATCH v2 9/9 libxl/xl: Overhaul passthrough setting logic

In reply to Ian Jackson

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted version of this code) is doing double duty. We actually need all of the following to be specificable:
* default ("unknown"): enable PT iff we have devices to pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.

Defaulting and error checking should be done in libxl. So, we make several changes here.

We introduce "enabled". (And we document "unknown".)

We move all of the error checking and defaulting code from xl into libxl. Now, libxl__domain_config_setdefault has all of the necessary information to get this right. So we can do it all there, in one place.

We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were specified (ii) whether pt_share can be used.

xl now only has to parse the enum in the same way as it parses all other enums.

This change fixes a regression from earlier 4.13-pre: until recent changes, passthrough was only enabled by default if passthrough devices were specified. We restore this behaviour.

This will hide, from the point of view of libvirt tests in osstest, a separate hypervisor regression which prevents migration of a domain with passthrough enabled but without actual PT devices.

---
v2: New patch in this version of the series.

---
 tools/libxl/libxl_create.c  | 57 ++++++++++++++++++++++++++++++--------
 tools/libxl/libxl_types.idl |  5 ++--
 tools/xl/xl_parse.c         | 67 ++++-----------------------------------------
 3 files changed, 53 insertions(+), 76 deletions(-)
tools/libxl/libxl_create.c +45 -12
index 69971c97b6..fccb6a6271 100644
@@ -57,18 +57,6 @@ int libxl__domain_create_info_setdefault(libxl__gc *gc,
     if (!c_info->ssidref)
         c_info->ssidref = SECINITSID_DOMU;
 
-    if (info->cap_hvm_directio &&
-        (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN)) {
-        c_info->passthrough = ((c_info->type == LIBXL_DOMAIN_TYPE_PV) ||
-                               !info->cap_iommu_hap_pt_share) ?
-            LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
-    } else if (!info->cap_hvm_directio) {
-        c_info->passthrough = LIBXL_PASSTHROUGH_DISABLED;
-    }
-
-    /* An explicit setting should now have been chosen */
-    assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
-
     return 0;
 }
 
@@ -904,6 +892,7 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
     libxl_ctx *ctx = libxl__gc_owner(gc);
     int ret;
     bool pod_enabled = false;
+    libxl_domain_create_info *c_info = &d_config->c_info;
 
     libxl_physinfo physinfo;
     ret = libxl_get_physinfo(CTX, &physinfo);
@@ -968,6 +957,50 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
         goto error_out;
     }
 
+    bool need_pt = d_config->num_pcidevs || d_config->num_dtdevs;
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN) {
+        c_info->passthrough = need_pt
+            ? LIBXL_PASSTHROUGH_ENABLED : LIBXL_PASSTHROUGH_DISABLED;
+    }
+
+    bool iommu_enabled = physinfo.cap_hvm_directio;
+    if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED && !iommu_enabled) {
+        LOGD(ERROR, domid,
+             "ERROR: passthrough not supported on this platform\n");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_DISABLED && need_pt) {
+        LOGD(ERROR, domid,
+             "passthrough disabled but devices are specified");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    const char *whynot_pt_share =
+        c_info->type == LIBXL_DOMAIN_TYPE_PV ? "not valid for PV domain" :
+        !physinfo.cap_iommu_hap_pt_share ? "not supported on this platform" :
+        NULL;
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+        assert(iommu_enabled);
+        c_info->passthrough = whynot_pt_share
+            ? LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_SHARE_PT && whynot_pt_share) {
+        LOGD(ERROR, domid,
+             "ERROR: passthrough=\"share_pt\" %s\n",
+             whynot_pt_share);
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    /* An explicit setting should now have been chosen */
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_ENABLED);
+
     /* If target_memkb is smaller than max_memkb, the subsequent call
      * to libxc when building HVM domain will enable PoD mode.
      */
tools/libxl/libxl_types.idl +3 -2
index 3ac9494b80..2441c0c233 100644
@@ -266,8 +266,9 @@ libxl_vkb_backend = Enumeration("vkb_backend", [
 libxl_passthrough = Enumeration("passthrough", [
     (0, "unknown"),
     (1, "disabled"),
-    (2, "sync_pt"),
-    (3, "share_pt"),
+    (2, "enabled"),
+    (3, "sync_pt"),
+    (4, "share_pt"),
     ])
 
 #
tools/xl/xl_parse.c +5 -62

87 lines not on this page · raw message

Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#13 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Quoted 26 lines · Ian Jackson

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted version of this code) is doing double duty. We actually need all of the following to be specificable:
* default ("unknown"): enable PT iff we have devices to pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.

Defaulting and error checking should be done in libxl. So, we make several changes here.

We introduce "enabled". (And we document "unknown".)

We move all of the error checking and defaulting code from xl into libxl. Now, libxl__domain_config_setdefault has all of the necessary information to get this right. So we can do it all there, in one place.

We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were specified (ii) whether pt_share can be used.

xl now only has to parse the enum in the same way as it parses all other enums.

Quoted 7 lines

This change fixes a regression from earlier 4.13-pre: until recent changes, passthrough was only enabled by default if passthrough devices were specified. We restore this behaviour.

This will hide, from the point of view of libvirt tests in osstest, a separate hypervisor regression which prevents migration of a domain with passthrough enabled but without actual PT devices.

I think Jan committed a patch to fix that, so this may need deleting.

I will let Jan and Paul confirm this.

Wei.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#14 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

In reply to Ian Jackson
Quoted 15 lines · Ian Jackson
tools/libxl/libxl_create.c +7 -0
index 69971c97b6..fccb6a6271 100644
@@ -968,6 +957,50 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
         goto error_out;
     }
 
+    bool need_pt = d_config->num_pcidevs || d_config->num_dtdevs;
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN) {
+        c_info->passthrough = need_pt
+            ? LIBXL_PASSTHROUGH_ENABLED : LIBXL_PASSTHROUGH_DISABLED;
+    }
+
+    bool iommu_enabled = physinfo.cap_hvm_directio;

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 976

Quoted 10 lines
tools/libxl/libxl_create.c +10 -0
+    if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED && !iommu_enabled) {
+        LOGD(ERROR, domid,
+             "ERROR: passthrough not supported on this platform\n");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_DISABLED && need_pt) {
+        LOGD(ERROR, domid,
+             "passthrough disabled but devices are specified");

This is the only log message which isn't prefixed with ERROR:

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 984

Quoted 8 lines
tools/libxl/libxl_create.c +8 -0
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    const char *whynot_pt_share =
+        c_info->type == LIBXL_DOMAIN_TYPE_PV ? "not valid for PV domain" :
+        !physinfo.cap_iommu_hap_pt_share ? "not supported on this platform" :
+        NULL;

This is a little more complicated.

For ARM, doesn't libxl treat guests as PV, or has that been fixed now? ARM's only passthrough mode is PT_SHARE.

On x86 for PVH, passthrough doesn't work yet.  This may not be an argument against constructing the guest suitably, but we should check that things don't explode in new and interesting ways from this change.

For x86 HVM, PT_SHARE is only available for HAP guests, so shadow guests must use PT_SYNC.

Quoted 8 lines
tools/libxl/libxl_create.c +8 -0
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+        assert(iommu_enabled);
+        c_info->passthrough = whynot_pt_share
+            ? LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_SHARE_PT && whynot_pt_share) {

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 1002

Quoted 10 lines
tools/libxl/libxl_create.c +10 -0
+        LOGD(ERROR, domid,
+             "ERROR: passthrough=\"share_pt\" %s\n",
+             whynot_pt_share);
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    /* An explicit setting should now have been chosen */
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_ENABLED);

This is confusing.  I think it would help if ...

Quoted 9 lines
tools/libxl/libxl_create.c +1 -0
+
     /* If target_memkb is smaller than max_memkb, the subsequent call
      * to libxc when building HVM domain will enable PoD mode.
      */
tools/libxl/libxl_types.idl +0 -0
index 3ac9494b80..2441c0c233 100644

tools/libxl/libxl_types.idl libxl_vkb_backend = Enumeration("vkb_backend", [ · line 271

Quoted 8 lines
tools/libxl/libxl_types.idl +3 -2
@@ -266,8 +266,9 @@ libxl_vkb_backend = Enumeration("vkb_backend", [
 libxl_passthrough = Enumeration("passthrough", [
     (0, "unknown"),
     (1, "disabled"),
-    (2, "sync_pt"),
-    (3, "share_pt"),
+    (2, "enabled"),
+    (3, "sync_pt"),
+    (4, "share_pt"),

... this had a comment explaining enabled is just interim value.

(2, "enabled"), # becomes {sync,share}_pt once defaults are evaluated

~Andrew

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#15 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Andrew Cooper writes ("Re: [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 6 lines · Ian Jackson

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 976

Quoted 3 lines
tools/libxl/libxl_create.c +3 -0
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_DISABLED && need_pt) {
+        LOGD(ERROR, domid,
+             "passthrough disabled but devices are specified");

This is the only log message which isn't prefixed with ERROR:

I will strip the ERROR: out of the others. I think I inherited them from when this code was in xl, where it's just fprintf stderr. Here the priority is an argument to LOGD.

Quoted 6 lines

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 984

Quoted 4 lines
tools/libxl/libxl_create.c +4 -0
+    const char *whynot_pt_share =
+        c_info->type == LIBXL_DOMAIN_TYPE_PV ? "not valid for PV domain" :
+        !physinfo.cap_iommu_hap_pt_share ? "not supported on this platform" :
+        NULL;

This is a little more complicated.

I aimed to replicate the logic prior to my series. FTAOD I think this means this was already broken in xl ? Anyway:

Quoted 2 lines

For ARM, doesn't libxl treat guests as PV, or has that been fixed now? ARM's only passthrough mode is PT_SHARE.

I think this means that I need to move the calculation of whynot_pt_share into arch-specific code. I'll wait and see what ARM folks say.

Quoted 3 lines

On x86 for PVH, passthrough doesn't work yet.  This may not be an argument against constructing the guest suitably, but we should check that things don't explode in new and interesting ways from this change.

If we know it doesn't work, it's not a good idea to accept it. I will arrange to reject it.

Quoted 2 lines

For x86 HVM, PT_SHARE is only available for HAP guests, so shadow guests must use PT_SYNC.

I will add a check for c_info->hap.

Quoted 5 lines

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 1002

Quoted 3 lines
tools/libxl/libxl_create.c +3 -0
+    /* An explicit setting should now have been chosen */
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_ENABLED);

This is confusing.  I think it would help if ...

...

Quoted 3 lines

... this had a comment explaining enabled is just interim value.

(2, "enabled"), # becomes {sync,share}_pt once defaults are evaluated

Good idea, thanks.

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#16 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

In reply to Andrew Cooper

Hi,

Quoted 38 lines · Andrew Cooper
Quoted 15 lines · Ian Jackson
tools/libxl/libxl_create.c +7 -0
index 69971c97b6..fccb6a6271 100644
@@ -968,6 +957,50 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
          goto error_out;
      }
 
+    bool need_pt = d_config->num_pcidevs || d_config->num_dtdevs;
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN) {
+        c_info->passthrough = need_pt
+            ? LIBXL_PASSTHROUGH_ENABLED : LIBXL_PASSTHROUGH_DISABLED;
+    }
+
+    bool iommu_enabled = physinfo.cap_hvm_directio;

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 976

Quoted 10 lines
tools/libxl/libxl_create.c +10 -0
+    if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED && !iommu_enabled) {
+        LOGD(ERROR, domid,
+             "ERROR: passthrough not supported on this platform\n");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_DISABLED && need_pt) {
+        LOGD(ERROR, domid,
+             "passthrough disabled but devices are specified");

This is the only log message which isn't prefixed with ERROR:

tools/libxl/libxl_create.c int libxl__domain_config_setdefault(libxl__gc *gc, · line 984

Quoted 8 lines
tools/libxl/libxl_create.c +8 -0
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    const char *whynot_pt_share =
+        c_info->type == LIBXL_DOMAIN_TYPE_PV ? "not valid for PV domain" :
+        !physinfo.cap_iommu_hap_pt_share ? "not supported on this platform" :
+        NULL;
Quoted 3 lines

This is a little more complicated.

For ARM, doesn't libxl treat guests as PV, or has that been fixed now?

libxl treats Arm guest as PVH now. Note that we seamlessly convert PV to PVH in libxl__arch_domain_{build, create}_info_setdefault().

So as long as this is called after any of those calls, then we should be fine.

Quoted 1 line

ARM's only passthrough mode is PT_SHARE.

Correct.

Cheers,

Signature · 6 lines
Julien Grall

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#17 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Julien Grall writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 5 lines

libxl treats Arm guest as PVH now. Note that we seamlessly convert PV to PVH in libxl__arch_domain_{build, create}_info_setdefault().

So as long as this is called after any of those calls, then we should be fine.

I'll check this.

This means that the algorithm is quite different on ARM to on x86:
ARM guests are always PVH and need PT_SHARE; on x86, PVH is not compatible with passthrough at all.

So I need to put this logic in an arch-specific function.

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#18 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

In reply to Ian Jackson
Quoted 6 lines · Ian Jackson

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted version of this code) is doing double duty. We actually need all of the following to be specificable:
* default ("unknown"): enable PT iff we have devices to pass through specified in the initial config file.

I realize this may be a bit late, but I find "unknown" to be a very strange word to use to indicate, "please choose the best option for me". For USB device type I used "auto", meaning, "automatically choose the best option for me". Paul didn't like "auto", which is fair enough, but I really don't see how "unknown" is better.

Anyway, not meaning to block, just a suggestion.

-George

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#19 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

George Dunlap writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 7 lines · Ian Jackson
Quoted 5 lines

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted version of this code) is doing double duty. We actually need all of the following to be specificable:
* default ("unknown"): enable PT iff we have devices to pass through specified in the initial config file.

Quoted 7 lines

I realize this may be a bit late, but I find "unknown" to be a very strange word to use to indicate, "please choose the best option for me". For USB device type I used "auto", meaning, "automatically choose the best option for me". Paul didn't like "auto", which is fair enough, but I really don't see how "unknown" is better.

Anyway, not meaning to block, just a suggestion.

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

None of this was in 4.12 so we are still free to change it. Now would be the time!

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#20 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Quoted 14 lines · Ian Jackson

George Dunlap writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 13 lines · Ian Jackson
Quoted 5 lines

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted version of this code) is doing double duty. We actually need all of the following to be specificable:
* default ("unknown"): enable PT iff we have devices to pass through specified in the initial config file.

I realize this may be a bit late, but I find "unknown" to be a very strange word to use to indicate, "please choose the best option for me". For USB device type I used "auto", meaning, "automatically choose the best option for me". Paul didn't like "auto", which is fair enough, but I really don't see how "unknown" is better.

Quoted 4 lines
Quoted 1 line

Anyway, not meaning to block, just a suggestion.

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

"unspecified"?

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#21 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Jürgen Groß writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 5 lines · Ian Jackson
Quoted 2 lines

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

"unspecified"?

That is IMO the best suggestion so far so I will go with that in my v3.

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#22 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Quoted 10 lines · Ian Jackson

Jürgen Groß writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 5 lines · Ian Jackson
Quoted 2 lines

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

"unspecified"?

That is IMO the best suggestion so far so I will go with that in my v3.

Seems odd to specify a parameter with a value of 'unspecified' ;-)

Paul

Quoted 2 lines

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#23 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Paul Durrant writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 7 lines · Ian Jackson
Quoted 6 lines

Jürgen Groß writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 4 lines · Ian Jackson
Quoted 2 lines

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

"unspecified"?

That is IMO the best suggestion so far so I will go with that in my v3.

Seems odd to specify a parameter with a value of 'unspecified' ;-)

I have tried to infer +1/-1/0 numbers from the mail thread. I have also looked at libxl_types.idl to see how many times we are using what name to represent roughly this concept:

Bikeshed colour Paul Juergen George Ian Anthony Wei #already

 unknown           ?      ?     -1    +2    ?     ?    17
 default           ?      ?     ?      0    ?     ?     2
 auto              -1     ?     +1     0    ?     ?     1
 unspecified       -1     +1    ?      0    ?     ?     0
                                      ^^^^^^^^^^^^^^^^
                                      libxl maintainers

On this basis IMO clearly this should go back to "unknown". I will do that in a respin (or maybe on commit) but right now I think I am still awaiting a review for this patch.

Thanks,
Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#24 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Quoted 21 lines · Ian Jackson

Paul Durrant writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 7 lines · Ian Jackson
Quoted 6 lines

Jürgen Groß writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 4 lines · Ian Jackson
Quoted 2 lines

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

"unspecified"?

That is IMO the best suggestion so far so I will go with that in my v3.

Seems odd to specify a parameter with a value of 'unspecified' ;-)

I have tried to infer +1/-1/0 numbers from the mail thread. I have also looked at libxl_types.idl to see how many times we are using what name to represent roughly this concept:

Bikeshed colour Paul Juergen George Ian Anthony Wei #already

Quoted 7 lines
 unknown           ?      ?     -1    +2    ?     ?    17
 default           ?      ?     ?      0    ?     ?     2
 auto              -1     ?     +1     0    ?     ?     1
 unspecified       -1     +1    ?      0    ?     ?     0
                                      ^^^^^^^^^^^^^^^^
                                      libxl maintainers

+1 to "unknown". I prefer consistency.

0 to all others.

Quoted 5 lines

On this basis IMO clearly this should go back to "unknown". I will do that in a respin (or maybe on commit) but right now I think I am still awaiting a review for this patch.

I think a respin is required -- in one of the mails your said you would need to put some logic into arch-specific function.

Wei.

Quoted 2 lines

Thanks,
Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#25 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Wei Liu writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 8 lines · Ian Jackson
Quoted 7 lines

Bikeshed colour Paul Juergen George Ian Anthony Wei #already

 unknown           ?      ?     -1    +2    ?     ?    17
 default           ?      ?     ?      0    ?     ?     2
 auto              -1     ?     +1     0    ?     ?     1
 unspecified       -1     +1    ?      0    ?     ?     0
Quoted 6 lines
Quoted 2 lines
                                      ^^^^^^^^^^^^^^^^
                                      libxl maintainers

+1 to "unknown". I prefer consistency.

0 to all others.

Thanks.

Quoted 6 lines
Quoted 3 lines

On this basis IMO clearly this should go back to "unknown". I will do that in a respin (or maybe on commit) but right now I think I am still awaiting a review for this patch.

I think a respin is required -- in one of the mails your said you would need to put some logic into arch-specific function.

Yes. Already done.

This is confusing because we are in the thread re v2, which is where this bikeshed conversation is happening.

But there is also a v3, see:

Subject: Re: [Xen-devel] [XEN PATCH for-4.13 v3 10/10] libxl/xl: Overhaul
passthrough setting logic

That's been R-B Anthony but I have now changed "unspecified" back to "unknown"...

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#26 lore raw

PATCH v4 10/10 libxl/xl: Overhaul passthrough setting logic passthrough setting logic

Here's what I hope is the final version...

From b60195e857d3699eaa55d9174a69bf91902cddb5 Mon Sep 17 00:00:00 2001
From: Ian Jackson <[email protected]>
Date: Mon, 7 Oct 2019 17:59:15 +0100
Subject: [XEN PATCH v4 for-4.13 10/10] libxl/xl: Overhaul passthrough setting
logic

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted version of this code) is doing double duty. We actually need all of the following to be specificable:
* default ("unknown"): enable PT iff we have devices to pass through specified in the initial config file.
* "enabled" (and fail if the platform doesn't support it).
* "disabled" (and reject future PT hotplug).
* "share_pt"/"sync_pt": enable PT and set a specific PT mode.

Defaulting and error checking should be done in libxl. So, we make several changes here.

We introduce "enabled". (And we document "unknown".)

We move all of the error checking and defaulting code from xl into libxl. Now, libxl__domain_config_setdefault has all of the necessary information to get this right. So we can do it all there. Choosing the specific mode is arch-specific.

We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were specified (ii) whether pt_share can be used (for each arch).

xl now only has to parse the enum in the same way as it parses all other enums.

This change fixes a regression from earlier 4.13-pre: until recent changes, passthrough was only enabled by default if passthrough devices were specified. We restore this behaviour.

CC Stefano Stabellini <[email protected]>
CC Julien Grall <[email protected]>
CC Volodymyr Babchuk <[email protected]>
CC Andrew Cooper <[email protected]>
CC Paul Durrant <[email protected]>
CC Jan Beulich <[email protected]>

---
v4: Fix trailing whitespace
No longer change "unknown" to "unspecified".

v3: Drop paragraph about masking another osstest regression,
as that's now fixed.
Drop redundant "ERROR:" in two log messages.
Add a comment about the way "enabled" gets changed to a specific value. Split passthrough mode defaulting into arch specific functions. On ARM, always choose (and insist on) share_pt.
Reject share_pt for non-HAP guests.
Reject passthrough for PVH guests.
Actually document "unspecified" option in xl.cfg(5)
Rename "unknown" to "unspecified"

v2: New patch in this version of the series.

---
 docs/man/xl.cfg.5.pod.in    |  6 ++++
 tools/libxl/libxl_arch.h    |  6 ++++
 tools/libxl/libxl_arm.c     | 24 ++++++++++++++++
 tools/libxl/libxl_create.c  | 41 +++++++++++++++++++--------
 tools/libxl/libxl_types.idl |  5 ++--
 tools/libxl/libxl_x86.c     | 41 +++++++++++++++++++++++++++
 tools/xl/xl_parse.c         | 67 ++++-----------------------------------------
 7 files changed, 114 insertions(+), 76 deletions(-)
docs/man/xl.cfg.5.pod.in +6 -0
index 64bed30bce..7e220d0c20 100644
@@ -660,6 +660,12 @@ in preference. However, the availability of this option is hardware
 specific. If B<xl info> reports B<virt_caps> containing
 B<iommu_hap_pt_share> then this option may be used.
 
+=item B<unspecified>
+
+The default, which chooses between B<disabled> and B<enabled>
+according to whether passthrough devices are enabled in the config
+file.
+
 =back
 
 =back
tools/libxl/libxl_arch.h +6 -0
index d624159e53..ee6641b3e6 100644
@@ -73,6 +73,12 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
                                               libxl_domain_build_info *b_info);
 
 _hidden
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+                                            uint32_t domid,
+                                            libxl_domain_config *d_config,
+                                            const libxl_physinfo *physinfo);
+
+_hidden
 int libxl__arch_extra_memory(libxl__gc *gc,
                              const libxl_domain_build_info *info,
                              uint64_t *out);
tools/libxl/libxl_arm.c +24 -0
index bf31b9b3ca..2f1ca69431 100644
@@ -1191,6 +1191,30 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
     libxl_domain_build_info_init_type(b_info, LIBXL_DOMAIN_TYPE_PVH);
 }
 
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+                                            uint32_t domid,
+                                            libxl_domain_config *d_config,
+                                            const libxl_physinfo *physinfo)
+{
+    int rc;
+    libxl_domain_create_info *const c_info = &d_config->c_info;
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+        c_info->passthrough = LIBXL_PASSTHROUGH_SHARE_PT;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_SYNC_PT) {
+        LOGD(ERROR, domid,
+             "passthrough=\"sync_pt\" not supported on ARM\n");
+        rc = ERROR_INVAL;
+        goto out;
+    }
+
+    rc = 0;
+ out:
+    return rc;
+}
+
 /*
  * Local variables:
  * mode: C
tools/libxl/libxl_create.c +29 -12

59 lines not on this page · raw message

tools/libxl/libxl_types.idl +3 -2
index 3ac9494b80..ca47db2961 100644
@@ -266,8 +266,9 @@ libxl_vkb_backend = Enumeration("vkb_backend", [
 libxl_passthrough = Enumeration("passthrough", [
     (0, "unknown"),
     (1, "disabled"),
-    (2, "sync_pt"),
-    (3, "share_pt"),
+    (2, "enabled"), # becomes {sync,share}_pt once defaults are evaluated
+    (3, "sync_pt"),
+    (4, "share_pt"),
     ])
 
 #
tools/libxl/libxl_x86.c +41 -0

47 lines not on this page · raw message

tools/xl/xl_parse.c +5 -62

87 lines not on this page · raw message

Signature · 7 lines
2.11.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#27 lore raw

Re: [Xen-devel] [XEN PATCH v4 for-4.13 10/10] libxl/xl: Overhaul passthrough setting logic passthrough setting logic

docs/man/xl.cfg.5.pod.in in preference. However, the availability of this option is hardware · line 663

Quoted 13 lines · Ian Jackson

---
v4: Fix trailing whitespace
No longer change "unknown" to "unspecified".

docs/man/xl.cfg.5.pod.in +1 -0
index 64bed30bce..7e220d0c20 100644
@@ -660,6 +660,12 @@ in preference. However, the availability of this option is hardware
 specific. If B<xl info> reports B<virt_caps> containing
 B<iommu_hap_pt_share> then this option may be used.
 
+=item B<unspecified>

Don't forget to change the man page as well ;-).

Signature · 6 lines
Anthony PERARD

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#28 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

In reply to Ian Jackson
Quoted 21 lines · Ian Jackson

Paul Durrant writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 7 lines · Ian Jackson
Quoted 6 lines

Jürgen Groß writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 4 lines · Ian Jackson
Quoted 2 lines

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

"unspecified"?

That is IMO the best suggestion so far so I will go with that in my v3.

Seems odd to specify a parameter with a value of 'unspecified' ;-)

I have tried to infer +1/-1/0 numbers from the mail thread. I have also looked at libxl_types.idl to see how many times we are using what name to represent roughly this concept:

Bikeshed colour Paul Juergen George Ian Anthony Wei #already

Quoted 7 lines
 unknown           ?      ?     -1    +2    ?     ?    17
 default           ?      ?     ?      0    ?     ?     2
 auto              -1     ?     +1     0    ?     ?     1
 unspecified       -1     +1    ?      0    ?     ?     0
                                      ^^^^^^^^^^^^^^^^
                                      libxl maintainers

Maybe "unknown" is more used in the API, but when I look at the manpage "unknown" value as never been used before. On the other hand "default" as been used twice in the man page. (and one "defaults" and two other "default" that I'm not sure if they can be in the config file.)

So I would say +2 for default and +1 for unknown.

Signature · 6 lines
Anthony PERARD

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
#29 lore raw

Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic

Quoted 30 lines · Anthony PERARD
Quoted 21 lines · Ian Jackson

Paul Durrant writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 7 lines · Ian Jackson
Quoted 6 lines

Jürgen Groß writes ("Re: [Xen-devel] [XEN PATCH for-4.13 v2 9/9] libxl/xl: Overhaul passthrough setting logic"):

Quoted 4 lines · Ian Jackson
Quoted 2 lines

I do not have a strong opinion about this. I would be happy with "auto" (or "default" maybe).

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

"unspecified"?

That is IMO the best suggestion so far so I will go with that in my v3.

Seems odd to specify a parameter with a value of 'unspecified' ;-)

I have tried to infer +1/-1/0 numbers from the mail thread. I have also looked at libxl_types.idl to see how many times we are using what name to represent roughly this concept:

Bikeshed colour Paul Juergen George Ian Anthony Wei #already

Quoted 7 lines
 unknown           ?      ?     -1    +2    ?     ?    17
 default           ?      ?     ?      0    ?     ?     2
 auto              -1     ?     +1     0    ?     ?     1
 unspecified       -1     +1    ?      0    ?     ?     0
                                      ^^^^^^^^^^^^^^^^
                                      libxl maintainers
Quoted 6 lines

Maybe "unknown" is more used in the API, but when I look at the manpage "unknown" value as never been used before. On the other hand "default" as been used twice in the man page. (and one "defaults" and two other "default" that I'm not sure if they can be in the config file.)

So I would say +2 for default and +1 for unknown.

Either is fine as long as it is clearly documented. If you feel strongly about "default", so be it. :-)

Wei.

Quoted 3 lines
Signature · 2 lines
-- 
Anthony PERARD

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#30 lore raw
In reply to Ian Jackson

Ian Jackson writes ("[XEN PATCH for-4.13 v2 0/9] libxl memkb & pt defaulting"):

Quoted 3 lines

This is v2 of my series to sort out the shadow/iommu memory and pci passthrough situation. I think this series will mask the bug which is currently blocking staging propagating to master.

I have pushed this to:
https://xenbits.xen.org/gitweb/?p=people/iwj/xen.git;a=summary
wip.libxl-memkb-ptcfg.v2

Ian.

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel