Skip to contentSkip to conversation

bcache: fix deadlock in bcache_allocator

PATCH In review Andrea Righi 2 participants 4 messages Aug 7, 2019 – Oct 11, 2019 bcache (block layer cache)

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 bcache: fix deadlock in bcache_allocator

bcache_allocator can call the following:

bch_allocator_thread()
-> bch_prio_write()

     -> bch_bucket_alloc()
        -> wait on &ca->set->bucket_wait

But the wake up event on bucket_wait is supposed to come from bch_allocator_thread() itself => deadlock:

[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds.
[ 1158.495929]       Not tainted 5.3.0-050300rc3-generic #201908042232
[ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1158.504413] bcache_allocato D    0 15861      2 0x80004000
[ 1158.504419] Call Trace:
[ 1158.504429]  __schedule+0x2a8/0x670
[ 1158.504432]  schedule+0x2d/0x90
[ 1158.504448]  bch_bucket_alloc+0xe5/0x370 [bcache]
[ 1158.504453]  ? wait_woken+0x80/0x80
[ 1158.504466]  bch_prio_write+0x1dc/0x390 [bcache]
[ 1158.504476]  bch_allocator_thread+0x233/0x490 [bcache]
[ 1158.504491]  kthread+0x121/0x140
[ 1158.504503]  ? invalidate_buckets+0x890/0x890 [bcache]
[ 1158.504506]  ? kthread_park+0xb0/0xb0
[ 1158.504510]  ret_from_fork+0x35/0x40

Fix by making the call to bch_prio_write() non-blocking, so that bch_allocator_thread() never waits on itself.

Moreover, make sure to wake up the garbage collector thread when bch_prio_write() is failing to allocate buckets.

---
Changes in v3:
- prevent buckets leak in bch_prio_write()

 drivers/md/bcache/alloc.c  |  5 ++++-
 drivers/md/bcache/bcache.h |  2 +-
 drivers/md/bcache/super.c  | 27 +++++++++++++++++++++------
 3 files changed, 26 insertions(+), 8 deletions(-)
drivers/md/bcache/alloc.c +4 -1
index 6f776823b9ba..a1df0d95151c 100644
@@ -377,7 +377,10 @@ static int bch_allocator_thread(void *arg)
 			if (!fifo_full(&ca->free_inc))
 				goto retry_invalidate;
 
-			bch_prio_write(ca);
+			if (bch_prio_write(ca, false) < 0) {
+				ca->invalidate_needs_gc = 1;
+				wake_up_gc(ca->set);
+			}
 		}
 	}
 out:
drivers/md/bcache/bcache.h +1 -1
index 013e35a9e317..deb924e1d790 100644
@@ -977,7 +977,7 @@ bool bch_cached_dev_error(struct cached_dev *dc);
 __printf(2, 3)
 bool bch_cache_set_error(struct cache_set *c, const char *fmt, ...);
 
-void bch_prio_write(struct cache *ca);
+int bch_prio_write(struct cache *ca, bool wait);
 void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent);
 
 extern struct workqueue_struct *bcache_wq;
drivers/md/bcache/super.c +21 -6
index 20ed838e9413..bd153234290d 100644
@@ -529,12 +529,29 @@ static void prio_io(struct cache *ca, uint64_t bucket, int op,
 	closure_sync(cl);
 }
 
-void bch_prio_write(struct cache *ca)
+int bch_prio_write(struct cache *ca, bool wait)
 {
 	int i;
 	struct bucket *b;
 	struct closure cl;
 
+	pr_debug("free_prio=%zu, free_none=%zu, free_inc=%zu",
+		 fifo_used(&ca->free[RESERVE_PRIO]),
+		 fifo_used(&ca->free[RESERVE_NONE]),
+		 fifo_used(&ca->free_inc));
+
+	/*
+	 * Pre-check if there are enough free buckets. In the non-blocking
+	 * scenario it's better to fail early rather than starting to allocate
+	 * buckets and do a cleanup later in case of failure.
+	 */
+	if (!wait) {
+		size_t avail = fifo_used(&ca->free[RESERVE_PRIO]) +
+			       fifo_used(&ca->free[RESERVE_NONE]);
+		if (prio_buckets(ca) > avail)
+			return -ENOMEM;
+	}
+
 	closure_init_stack(&cl);
 
 	lockdep_assert_held(&ca->set->bucket_lock);
@@ -544,9 +561,6 @@ void bch_prio_write(struct cache *ca)
 	atomic_long_add(ca->sb.bucket_size * prio_buckets(ca),
 			&ca->meta_sectors_written);
 
-	//pr_debug("free %zu, free_inc %zu, unused %zu", fifo_used(&ca->free),
-	//	 fifo_used(&ca->free_inc), fifo_used(&ca->unused));
-
 	for (i = prio_buckets(ca) - 1; i >= 0; --i) {
 		long bucket;
 		struct prio_set *p = ca->disk_buckets;
@@ -564,7 +578,7 @@ void bch_prio_write(struct cache *ca)
 		p->magic	= pset_magic(&ca->sb);
 		p->csum		= bch_crc64(&p->magic, bucket_bytes(ca) - 8);
 
-		bucket = bch_bucket_alloc(ca, RESERVE_PRIO, true);
+		bucket = bch_bucket_alloc(ca, RESERVE_PRIO, wait);
 		BUG_ON(bucket == -1);
 
 		mutex_unlock(&ca->set->bucket_lock);
@@ -593,6 +607,7 @@ void bch_prio_write(struct cache *ca)
 
 		ca->prio_last_buckets[i] = ca->prio_buckets[i];
 	}
+	return 0;
 }
 
 static void prio_read(struct cache *ca, uint64_t bucket)
@@ -1954,7 +1969,7 @@ static int run_cache_set(struct cache_set *c)
 
 		mutex_lock(&c->bucket_lock);
 		for_each_cache(ca, c, i)
-			bch_prio_write(ca);
+			bch_prio_write(ca, true);
 		mutex_unlock(&c->bucket_lock);
 
 		err = "cannot allocate new UUID bucket";
Signature · 1 line
2.20.1
#1 lore raw
Quoted 29 lines · Andrea Righi

bcache_allocator can call the following:

bch_allocator_thread()
-> bch_prio_write()

     -> bch_bucket_alloc()
        -> wait on &ca->set->bucket_wait

But the wake up event on bucket_wait is supposed to come from bch_allocator_thread() itself => deadlock:

[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds.
[ 1158.495929]       Not tainted 5.3.0-050300rc3-generic #201908042232
[ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1158.504413] bcache_allocato D    0 15861      2 0x80004000
[ 1158.504419] Call Trace:
[ 1158.504429]  __schedule+0x2a8/0x670
[ 1158.504432]  schedule+0x2d/0x90
[ 1158.504448]  bch_bucket_alloc+0xe5/0x370 [bcache]
[ 1158.504453]  ? wait_woken+0x80/0x80
[ 1158.504466]  bch_prio_write+0x1dc/0x390 [bcache]
[ 1158.504476]  bch_allocator_thread+0x233/0x490 [bcache]
[ 1158.504491]  kthread+0x121/0x140
[ 1158.504503]  ? invalidate_buckets+0x890/0x890 [bcache]
[ 1158.504506]  ? kthread_park+0xb0/0xb0
[ 1158.504510]  ret_from_fork+0x35/0x40

Fix by making the call to bch_prio_write() non-blocking, so that bch_allocator_thread() never waits on itself.

Quoted 6 lines

Moreover, make sure to wake up the garbage collector thread when bch_prio_write() is failing to allocate buckets.

OK, I add this version into my for-test directory. Once you have a new version, I will update it. Thanks.

Coly Li

Quoted 110 lines

---
Changes in v3:
- prevent buckets leak in bch_prio_write()

 drivers/md/bcache/alloc.c  |  5 ++++-
 drivers/md/bcache/bcache.h |  2 +-
 drivers/md/bcache/super.c  | 27 +++++++++++++++++++++------
 3 files changed, 26 insertions(+), 8 deletions(-)
drivers/md/bcache/alloc.c +4 -1
index 6f776823b9ba..a1df0d95151c 100644
@@ -377,7 +377,10 @@ static int bch_allocator_thread(void *arg)
 			if (!fifo_full(&ca->free_inc))
 				goto retry_invalidate;
 
-			bch_prio_write(ca);
+			if (bch_prio_write(ca, false) < 0) {
+				ca->invalidate_needs_gc = 1;
+				wake_up_gc(ca->set);
+			}
 		}
 	}
 out:
drivers/md/bcache/bcache.h +1 -1
index 013e35a9e317..deb924e1d790 100644
@@ -977,7 +977,7 @@ bool bch_cached_dev_error(struct cached_dev *dc);
 __printf(2, 3)
 bool bch_cache_set_error(struct cache_set *c, const char *fmt, ...);
 
-void bch_prio_write(struct cache *ca);
+int bch_prio_write(struct cache *ca, bool wait);
 void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent);
 
 extern struct workqueue_struct *bcache_wq;
drivers/md/bcache/super.c +21 -6
index 20ed838e9413..bd153234290d 100644
@@ -529,12 +529,29 @@ static void prio_io(struct cache *ca, uint64_t bucket, int op,
 	closure_sync(cl);
 }
 
-void bch_prio_write(struct cache *ca)
+int bch_prio_write(struct cache *ca, bool wait)
 {
 	int i;
 	struct bucket *b;
 	struct closure cl;
 
+	pr_debug("free_prio=%zu, free_none=%zu, free_inc=%zu",
+		 fifo_used(&ca->free[RESERVE_PRIO]),
+		 fifo_used(&ca->free[RESERVE_NONE]),
+		 fifo_used(&ca->free_inc));
+
+	/*
+	 * Pre-check if there are enough free buckets. In the non-blocking
+	 * scenario it's better to fail early rather than starting to allocate
+	 * buckets and do a cleanup later in case of failure.
+	 */
+	if (!wait) {
+		size_t avail = fifo_used(&ca->free[RESERVE_PRIO]) +
+			       fifo_used(&ca->free[RESERVE_NONE]);
+		if (prio_buckets(ca) > avail)
+			return -ENOMEM;
+	}
+
 	closure_init_stack(&cl);
 
 	lockdep_assert_held(&ca->set->bucket_lock);
@@ -544,9 +561,6 @@ void bch_prio_write(struct cache *ca)
 	atomic_long_add(ca->sb.bucket_size * prio_buckets(ca),
 			&ca->meta_sectors_written);
 
-	//pr_debug("free %zu, free_inc %zu, unused %zu", fifo_used(&ca->free),
-	//	 fifo_used(&ca->free_inc), fifo_used(&ca->unused));
-
 	for (i = prio_buckets(ca) - 1; i >= 0; --i) {
 		long bucket;
 		struct prio_set *p = ca->disk_buckets;
@@ -564,7 +578,7 @@ void bch_prio_write(struct cache *ca)
 		p->magic	= pset_magic(&ca->sb);
 		p->csum		= bch_crc64(&p->magic, bucket_bytes(ca) - 8);
 
-		bucket = bch_bucket_alloc(ca, RESERVE_PRIO, true);
+		bucket = bch_bucket_alloc(ca, RESERVE_PRIO, wait);
 		BUG_ON(bucket == -1);
 
 		mutex_unlock(&ca->set->bucket_lock);
@@ -593,6 +607,7 @@ void bch_prio_write(struct cache *ca)
 
 		ca->prio_last_buckets[i] = ca->prio_buckets[i];
 	}
+	return 0;
 }
 
 static void prio_read(struct cache *ca, uint64_t bucket)
@@ -1954,7 +1969,7 @@ static int run_cache_set(struct cache_set *c)
 
 		mutex_lock(&c->bucket_lock);
 		for_each_cache(ca, c, i)
-			bch_prio_write(ca);
+			bch_prio_write(ca, true);
 		mutex_unlock(&c->bucket_lock);
 
 		err = "cannot allocate new UUID bucket";
Signature · 1 line
Coly Li
#2 lore raw
Quoted 33 lines · Coly Li
Quoted 32 lines · Andrea Righi

bcache_allocator can call the following:

bch_allocator_thread()
-> bch_prio_write()

     -> bch_bucket_alloc()
        -> wait on &ca->set->bucket_wait

But the wake up event on bucket_wait is supposed to come from bch_allocator_thread() itself => deadlock:

[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds.
[ 1158.495929]       Not tainted 5.3.0-050300rc3-generic #201908042232
[ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1158.504413] bcache_allocato D    0 15861      2 0x80004000
[ 1158.504419] Call Trace:
[ 1158.504429]  __schedule+0x2a8/0x670
[ 1158.504432]  schedule+0x2d/0x90
[ 1158.504448]  bch_bucket_alloc+0xe5/0x370 [bcache]
[ 1158.504453]  ? wait_woken+0x80/0x80
[ 1158.504466]  bch_prio_write+0x1dc/0x390 [bcache]
[ 1158.504476]  bch_allocator_thread+0x233/0x490 [bcache]
[ 1158.504491]  kthread+0x121/0x140
[ 1158.504503]  ? invalidate_buckets+0x890/0x890 [bcache]
[ 1158.504506]  ? kthread_park+0xb0/0xb0
[ 1158.504510]  ret_from_fork+0x35/0x40

Fix by making the call to bch_prio_write() non-blocking, so that bch_allocator_thread() never waits on itself.

Moreover, make sure to wake up the garbage collector thread when bch_prio_write() is failing to allocate buckets.

Quoted 8 lines
Quoted 3 lines

OK, I add this version into my for-test directory. Once you have a new version, I will update it. Thanks.

Coly Li

Hi Coly,

any news about this patch? We're still using it in Ubuntu and no errors have been reported so far. Do you think we can add this to linux-next?

Thanks,
-Andrea

#3 lore raw
Quoted 38 lines · Andrea Righi
Quoted 37 lines · Coly Li
Quoted 35 lines · Andrea Righi

bcache_allocator can call the following:

bch_allocator_thread()
-> bch_prio_write()

     -> bch_bucket_alloc()
        -> wait on &ca->set->bucket_wait

But the wake up event on bucket_wait is supposed to come from bch_allocator_thread() itself => deadlock:

[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds.
[ 1158.495929]       Not tainted 5.3.0-050300rc3-generic #201908042232
[ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1158.504413] bcache_allocato D    0 15861      2 0x80004000
[ 1158.504419] Call Trace:
[ 1158.504429]  __schedule+0x2a8/0x670
[ 1158.504432]  schedule+0x2d/0x90
[ 1158.504448]  bch_bucket_alloc+0xe5/0x370 [bcache]
[ 1158.504453]  ? wait_woken+0x80/0x80
[ 1158.504466]  bch_prio_write+0x1dc/0x390 [bcache]
[ 1158.504476]  bch_allocator_thread+0x233/0x490 [bcache]
[ 1158.504491]  kthread+0x121/0x140
[ 1158.504503]  ? invalidate_buckets+0x890/0x890 [bcache]
[ 1158.504506]  ? kthread_park+0xb0/0xb0
[ 1158.504510]  ret_from_fork+0x35/0x40

Fix by making the call to bch_prio_write() non-blocking, so that bch_allocator_thread() never waits on itself.

Moreover, make sure to wake up the garbage collector thread when bch_prio_write() is failing to allocate buckets.

Quoted 8 lines
Quoted 4 lines

OK, I add this version into my for-test directory. Once you have a new version, I will update it. Thanks.

Coly Li

Hi Coly,

any news about this patch? We're still using it in Ubuntu and no errors

It has been testing on your side for quite long time, and I don't have better idea on the fix. It looks solid enough, and indeed I have it in my development patches already with more testing.

Quoted 1 line

have been reported so far. Do you think we can add this to linux-next?

Yes, this is my plan. It is in my testing queue with other developing patches.

Thanks.

Signature · 1 line
Coly Li