Skip to contentSkip to conversation

gitlab-ci: Split tests into separate jobs

PATCH Superseded Chris Paterson 2 participants 18 messages Oct 13, 2019 – Oct 14, 2019

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

---
 .gitlab-ci.yml | 84 +++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 66 insertions(+), 18 deletions(-)
.gitlab-ci.yml +66 -18
index ba8b75abaee7..b72f0325435a 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_cyclonev_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_cyclonev_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -21,7 +23,7 @@ arm_hitachi_cyclonev_defconfig:
     paths:
       - output
 
-arm_hitachi_omap_defconfig:
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -37,7 +39,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -53,7 +55,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -70,7 +72,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_imx6.config:
+test:arm_renesas_shmobile_defconfig:
+  stage: test
+  needs: ["build:arm_renesas_shmobile_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_imx6.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -86,7 +103,7 @@ arm_siemens_imx6.config:
     paths:
       - output
 
-arm64_moxa_eds_defconfig:
+build:arm64_moxa_eds_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -102,7 +119,7 @@ arm64_moxa_eds_defconfig:
     paths:
       - output
 
-arm64_renesas_defconfig:
+build:arm64_renesas_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -119,7 +136,22 @@ arm64_renesas_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx2.config:
+test:arm64_renesas_defconfig:
+  stage: test
+  needs: ["build:arm64_renesas_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:x86_plathome_obsvx2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -135,7 +167,7 @@ x86_plathome_obsvx2.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -151,7 +183,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -167,7 +199,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_atom_baytrail_cip.config:
+build:x86_toshiba_atom_baytrail_cip.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -183,8 +215,10 @@ x86_toshiba_atom_baytrail_cip.config:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -201,7 +235,22 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-arm64_defconfig:
+test:arm_shmobile_defconfig:
+  stage: test
+  needs: ["build:arm_shmobile_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm64_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -218,11 +267,10 @@ arm64_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm64_defconfig:
   stage: test
+  needs: ["build:arm64_defconfig"]
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  when: always
   variables:
     GIT_STRATEGY: none
     TEST_TIMEOUT: 60
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

---
 .gitlab-ci.yml | 92 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 71 insertions(+), 21 deletions(-)
.gitlab-ci.yml +71 -21
index 52f084fe37b5..b5a225c96f90 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_cyclonev_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_cyclonev_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -21,7 +23,7 @@ arm_hitachi_cyclonev_defconfig:
     paths:
       - output
 
-arm_hitachi_omap_defconfig:
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -37,7 +39,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -53,7 +55,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -70,7 +72,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_imx6.config:
+test:arm_renesas_shmobile_defconfig:
+  stage: test
+  needs: ["build:arm_renesas_shmobile_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_imx6.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -86,7 +103,7 @@ arm_siemens_imx6.config:
     paths:
       - output
 
-arm64_moxa_eds_defconfig:
+build:arm64_moxa_eds_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -102,7 +119,7 @@ arm64_moxa_eds_defconfig:
     paths:
       - output
 
-arm64_renesas_defconfig:
+build:arm64_renesas_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -119,7 +136,22 @@ arm64_renesas_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx2.config:
+test:arm64_renesas_defconfig:
+  stage: test
+  needs: ["build:arm64_renesas_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:x86_plathome_obsvx2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -135,7 +167,7 @@ x86_plathome_obsvx2.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -151,7 +183,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -167,7 +199,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_atom_baytrail_cip.config:
+build:x86_toshiba_atom_baytrail_cip.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -183,8 +215,10 @@ x86_toshiba_atom_baytrail_cip.config:
     paths:
       - output
 
-# RT build configurations
-rt_arm_socfpga_defconfig:
+#########################
+# RT CIP configurations #
+#########################
+build:rt_arm_socfpga_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -200,7 +234,7 @@ rt_arm_socfpga_defconfig:
     paths:
       - output
 
-rt_x86_siemens_i386-rt.config:
+build:rt_x86_siemens_i386-rt.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -216,8 +250,10 @@ rt_x86_siemens_i386-rt.config:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -234,7 +270,22 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-arm64_defconfig:
+test:arm_shmobile_defconfig:
+  stage: test
+  needs: ["build:arm_shmobile_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm64_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -251,11 +302,10 @@ arm64_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm64_defconfig:
   stage: test
+  needs: ["build:arm64_defconfig"]
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  when: always
   variables:
     GIT_STRATEGY: none
     TEST_TIMEOUT: 60
Signature · 1 line
2.17.1
#2 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

In reply to Chris Paterson

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

---
 .gitlab-ci.yml | 60 ++++++++++++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 21 deletions(-)
.gitlab-ci.yml +39 -21
index e33099ea6594..73cea6bbce89 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_omap_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -21,7 +23,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -37,7 +39,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -54,7 +56,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-axm2_defconfig:
+test:arm_renesas_shmobile_defconfig:
+  stage: test
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  when: always
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_am335x-axm2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -70,7 +87,7 @@ arm_siemens_am335x-axm2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-draco_defconfig:
+build:arm_siemens_am335x-draco_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -86,7 +103,7 @@ arm_siemens_am335x-draco_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-dxr2_defconfig:
+build:arm_siemens_am335x-dxr2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -102,7 +119,7 @@ arm_siemens_am335x-dxr2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-etamin_defconfig:
+build:arm_siemens_am335x-etamin_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -118,7 +135,7 @@ arm_siemens_am335x-etamin_defconfig:
     paths:
       - output
 
-arm_siemens_am57xx-pxm3.config:
+build:arm_siemens_am57xx-pxm3.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -134,7 +151,7 @@ arm_siemens_am57xx-pxm3.config:
     paths:
       - output
 
-arm_siemens_dcu2.config:
+build:arm_siemens_dcu2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -150,7 +167,7 @@ arm_siemens_dcu2.config:
     paths:
       - output
 
-arm_siemens_imx6_defconfig:
+build:arm_siemens_imx6_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -166,7 +183,7 @@ arm_siemens_imx6_defconfig:
     paths:
       - output
 
-arm_toshiba_tegra_defconfig:
+build:arm_toshiba_tegra_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -182,7 +199,7 @@ arm_toshiba_tegra_defconfig:
     paths:
       - output
 
-arm_toshiba_zynq_defconfig:
+build:arm_toshiba_zynq_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -198,7 +215,7 @@ arm_toshiba_zynq_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx1.config:
+build:x86_plathome_obsvx1.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -214,7 +231,7 @@ x86_plathome_obsvx1.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -230,7 +247,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -246,7 +263,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_defconfig:
+build:x86_toshiba_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -262,8 +279,10 @@ x86_toshiba_defconfig:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -280,8 +299,7 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm_shmobile_defconfig:
   stage: test
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
   when: always
Signature · 1 line
2.17.1
#3 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

Quoted 52 lines

From: Chris Paterson <[email protected]>
Sent: 13 October 2019 22:19

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

---
 .gitlab-ci.yml | 60 ++++++++++++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 21 deletions(-)
.gitlab-ci.yml +4 -2
index e33099ea6594..73cea6bbce89 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_omap_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -21,7 +23,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -37,7 +39,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml arm_renesas_shmobile_defconfig: · line 60

Quoted 6 lines
.gitlab-ci.yml +2 -1
@@ -54,7 +56,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-axm2_defconfig:
+test:arm_renesas_shmobile_defconfig:
+  stage: test

Missing:
needs: ["build:arm_renesas_shmobile_defconfig"]

Quoted 154 lines
.gitlab-ci.yml +1 -0
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-

$DOCKER_IMAGE_TAG

.gitlab-ci.yml +13 -0
+  when: always
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_am335x-axm2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -70,7 +87,7 @@ arm_siemens_am335x-axm2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-draco_defconfig:
+build:arm_siemens_am335x-draco_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -86,7 +103,7 @@ arm_siemens_am335x-draco_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-dxr2_defconfig:
+build:arm_siemens_am335x-dxr2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -102,7 +119,7 @@ arm_siemens_am335x-dxr2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-etamin_defconfig:
+build:arm_siemens_am335x-etamin_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -118,7 +135,7 @@ arm_siemens_am335x-etamin_defconfig:
     paths:
       - output
 
-arm_siemens_am57xx-pxm3.config:
+build:arm_siemens_am57xx-pxm3.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -134,7 +151,7 @@ arm_siemens_am57xx-pxm3.config:
     paths:
       - output
 
-arm_siemens_dcu2.config:
+build:arm_siemens_dcu2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -150,7 +167,7 @@ arm_siemens_dcu2.config:
     paths:
       - output
 
-arm_siemens_imx6_defconfig:
+build:arm_siemens_imx6_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -166,7 +183,7 @@ arm_siemens_imx6_defconfig:
     paths:
       - output
 
-arm_toshiba_tegra_defconfig:
+build:arm_toshiba_tegra_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -182,7 +199,7 @@ arm_toshiba_tegra_defconfig:
     paths:
       - output
 
-arm_toshiba_zynq_defconfig:
+build:arm_toshiba_zynq_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -198,7 +215,7 @@ arm_toshiba_zynq_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx1.config:
+build:x86_plathome_obsvx1.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -214,7 +231,7 @@ x86_plathome_obsvx1.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -230,7 +247,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -246,7 +263,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_defconfig:
+build:x86_toshiba_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +4 -2
@@ -262,8 +279,10 @@ x86_toshiba_defconfig:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml arm_shmobile_defconfig: · line 303

Quoted 7 lines
.gitlab-ci.yml +1 -2
@@ -280,8 +299,7 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm_shmobile_defconfig:
   stage: test

Missing:
needs: ["build:arm_shmobile_defconfig"]

I'll send a v2 for the series.

Chris

Quoted 5 lines
.gitlab-ci.yml +0 -0
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-

$DOCKER_IMAGE_TAG
when: always
--
2.17.1

#4 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

In reply to Chris Paterson

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

---
 .gitlab-ci.yml | 66 ++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 23 deletions(-)
.gitlab-ci.yml +43 -23
index 59323dd06c6a..fcbfdd0b2197 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_omap_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -21,7 +23,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -37,7 +39,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -54,7 +56,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-axm2_defconfig:
+test:arm_renesas_shmobile_defconfig:
+  stage: test
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  when: always
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_am335x-axm2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -70,7 +87,7 @@ arm_siemens_am335x-axm2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-draco_defconfig:
+build:arm_siemens_am335x-draco_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -86,7 +103,7 @@ arm_siemens_am335x-draco_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-dxr2_defconfig:
+build:arm_siemens_am335x-dxr2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -102,7 +119,7 @@ arm_siemens_am335x-dxr2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-etamin_defconfig:
+build:arm_siemens_am335x-etamin_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -118,7 +135,7 @@ arm_siemens_am335x-etamin_defconfig:
     paths:
       - output
 
-arm_siemens_am57xx-pxm3.config:
+build:arm_siemens_am57xx-pxm3.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -134,7 +151,7 @@ arm_siemens_am57xx-pxm3.config:
     paths:
       - output
 
-arm_siemens_dcu2.config:
+build:arm_siemens_dcu2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -150,7 +167,7 @@ arm_siemens_dcu2.config:
     paths:
       - output
 
-arm_siemens_imx6_defconfig:
+build:arm_siemens_imx6_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -166,7 +183,7 @@ arm_siemens_imx6_defconfig:
     paths:
       - output
 
-arm_toshiba_tegra_defconfig:
+build:arm_toshiba_tegra_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -182,7 +199,7 @@ arm_toshiba_tegra_defconfig:
     paths:
       - output
 
-arm_toshiba_zynq_defconfig:
+build:arm_toshiba_zynq_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -198,7 +215,7 @@ arm_toshiba_zynq_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx1.config:
+build:x86_plathome_obsvx1.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -214,7 +231,7 @@ x86_plathome_obsvx1.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -230,7 +247,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -246,7 +263,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_defconfig:
+build:x86_toshiba_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -262,8 +279,10 @@ x86_toshiba_defconfig:
     paths:
       - output
 
-# RT build configurations
-rt_x86_siemens_i386-rt.config:
+#########################
+# RT CIP configurations #
+#########################
+build:rt_x86_siemens_i386-rt.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -279,8 +298,10 @@ rt_x86_siemens_i386-rt.config:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -297,8 +318,7 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm_shmobile_defconfig:
   stage: test
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
   when: always
Signature · 1 line
2.17.1
#5 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

Quoted 52 lines

From: Chris Paterson <[email protected]>
Sent: 13 October 2019 22:19

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

---
 .gitlab-ci.yml | 66 ++++++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 23 deletions(-)
.gitlab-ci.yml +4 -2
index 59323dd06c6a..fcbfdd0b2197 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_omap_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -21,7 +23,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -37,7 +39,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml arm_renesas_shmobile_defconfig: · line 60

Quoted 6 lines
.gitlab-ci.yml +2 -1
@@ -54,7 +56,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-axm2_defconfig:
+test:arm_renesas_shmobile_defconfig:
+  stage: test

Missing:
needs: ["build:arm_renesas_shmobile_defconfig"]

Quoted 168 lines
.gitlab-ci.yml +1 -0
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-

$DOCKER_IMAGE_TAG

.gitlab-ci.yml +13 -0
+  when: always
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_am335x-axm2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -70,7 +87,7 @@ arm_siemens_am335x-axm2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-draco_defconfig:
+build:arm_siemens_am335x-draco_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -86,7 +103,7 @@ arm_siemens_am335x-draco_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-dxr2_defconfig:
+build:arm_siemens_am335x-dxr2_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -102,7 +119,7 @@ arm_siemens_am335x-dxr2_defconfig:
     paths:
       - output
 
-arm_siemens_am335x-etamin_defconfig:
+build:arm_siemens_am335x-etamin_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -118,7 +135,7 @@ arm_siemens_am335x-etamin_defconfig:
     paths:
       - output
 
-arm_siemens_am57xx-pxm3.config:
+build:arm_siemens_am57xx-pxm3.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -134,7 +151,7 @@ arm_siemens_am57xx-pxm3.config:
     paths:
       - output
 
-arm_siemens_dcu2.config:
+build:arm_siemens_dcu2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -150,7 +167,7 @@ arm_siemens_dcu2.config:
     paths:
       - output
 
-arm_siemens_imx6_defconfig:
+build:arm_siemens_imx6_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -166,7 +183,7 @@ arm_siemens_imx6_defconfig:
     paths:
       - output
 
-arm_toshiba_tegra_defconfig:
+build:arm_toshiba_tegra_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -182,7 +199,7 @@ arm_toshiba_tegra_defconfig:
     paths:
       - output
 
-arm_toshiba_zynq_defconfig:
+build:arm_toshiba_zynq_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -198,7 +215,7 @@ arm_toshiba_zynq_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx1.config:
+build:x86_plathome_obsvx1.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -214,7 +231,7 @@ x86_plathome_obsvx1.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -230,7 +247,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +1 -1
@@ -246,7 +263,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_defconfig:
+build:x86_toshiba_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +4 -2
@@ -262,8 +279,10 @@ x86_toshiba_defconfig:
     paths:
       - output
 
-# RT build configurations
-rt_x86_siemens_i386-rt.config:
+#########################
+# RT CIP configurations #
+#########################
+build:rt_x86_siemens_i386-rt.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml +4 -2
@@ -279,8 +298,10 @@ rt_x86_siemens_i386-rt.config:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-

$DOCKER_IMAGE_TAG
variables:

.gitlab-ci.yml arm_shmobile_defconfig: · line 322

Quoted 7 lines
.gitlab-ci.yml +1 -2
@@ -297,8 +318,7 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm_shmobile_defconfig:
   stage: test

Missing:
needs: ["build:arm_shmobile_defconfig"]

I'll send a v2 for the series.

Kind regards, Chris

Quoted 5 lines
.gitlab-ci.yml +0 -0
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-

$DOCKER_IMAGE_TAG
when: always
--
2.17.1

#6 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

Hi!

Quoted 1 line

I'll send a v2 for the series.

Ok. Feel free to send just _one_ series for -cip; I can apply it to both branches, or maybe just apply it to -cip, and rely on regular -cip -> -cip-rt merge to propagate it to -rt so that history is clean.

Best regards,
Pavel

Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20191014/594491b5/attachment.sig>
#7 lore raw

PATCH 1/3 gitlab-ci: Split tests into separate jobs

Quoted 11 lines

From: Pavel Machek <[email protected]>
Sent: 14 October 2019 08:36

Hi!

Quoted 1 line

I'll send a v2 for the series.

Ok. Feel free to send just _one_ series for -cip; I can apply it to both branches, or maybe just apply it to -cip, and rely on regular -cip -> -cip-rt merge to propagate it to -rt so that history is clean.

Ah, sorry. Too late!

Feel free to disregard the -rt patches.

Kind regards, Chris

Quoted 7 lines

Best regards,
????? ??????? ??????? ??????? ??????? ??????? ??????? ??????? ??????? Pavel --
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

#8 lore raw

PATCH 2/3 gitlab-ci: Remove unofficial build configurations

In reply to Chris Paterson

The Arm64 defconfig creates a huge image and an even larger modules archive.

Both the build and test takes a long time, and CIP don't officially support this configuration.

Also remove shmobile_defconfig as we're essentially building/testing the same already.

---
 .gitlab-ci.yml | 67 --------------------------------------------------
 1 file changed, 67 deletions(-)
.gitlab-ci.yml +0 -67
index b72f0325435a..d297f3deaced 100644
@@ -214,70 +214,3 @@ build:x86_toshiba_atom_baytrail_cip.config:
     when: always
     paths:
       - output
-
-########################
-# Extra configurations #
-########################
-build:arm_shmobile_defconfig:
-  stage: build
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
-  variables:
-    BUILD_ARCH: arm
-    CONFIG: shmobile_defconfig
-    CONFIG_LOC: intree
-    DEVICES: r8a7743-iwg20d-q7 r8a7745-iwg22d-sodimm
-    DTBS: r8a7743-iwg20d-q7-dbcm-ca.dtb r8a7745-iwg22d-sodimm-dbhd-ca.dtb
-  script:
-    - /opt/build_kernel.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-test:arm_shmobile_defconfig:
-  stage: test
-  needs: ["build:arm_shmobile_defconfig"]
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  variables:
-    GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
-  script:
-    - /opt/submit_tests.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-build:arm64_defconfig:
-  stage: build
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
-  variables:
-    BUILD_ARCH: arm64
-    CONFIG: defconfig
-    CONFIG_LOC: intree
-    DEVICES: r8a774c0-ek874 r8a774a1-hihope-rzg2m-ex
-    DTBS: r8a774c0-ek874.dtb r8a774a1-hihope-rzg2m-ex.dtb
-  script:
-    - /opt/build_kernel.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-test:arm64_defconfig:
-  stage: test
-  needs: ["build:arm64_defconfig"]
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  variables:
-    GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
-  script:
-    - /opt/submit_tests.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
Signature · 1 line
2.17.1
#9 lore raw

PATCH 2/3 gitlab-ci: Remove unofficial build configurations

In reply to Chris Paterson

The Arm64 defconfig creates a huge image and an even larger modules archive.

Both the build and test takes a long time, and CIP don't officially support this configuration.

Also remove shmobile_defconfig as we're essentially building/testing the same already.

---
 .gitlab-ci.yml | 67 --------------------------------------------------
 1 file changed, 67 deletions(-)
.gitlab-ci.yml +0 -67
index b5a225c96f90..7ebd29b94c3a 100644
@@ -249,70 +249,3 @@ build:rt_x86_siemens_i386-rt.config:
     when: always
     paths:
       - output
-
-########################
-# Extra configurations #
-########################
-build:arm_shmobile_defconfig:
-  stage: build
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
-  variables:
-    BUILD_ARCH: arm
-    CONFIG: shmobile_defconfig
-    CONFIG_LOC: intree
-    DEVICES: r8a7743-iwg20d-q7 r8a7745-iwg22d-sodimm
-    DTBS: r8a7743-iwg20d-q7-dbcm-ca.dtb r8a7745-iwg22d-sodimm-dbhd-ca.dtb
-  script:
-    - /opt/build_kernel.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-test:arm_shmobile_defconfig:
-  stage: test
-  needs: ["build:arm_shmobile_defconfig"]
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  variables:
-    GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
-  script:
-    - /opt/submit_tests.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-build:arm64_defconfig:
-  stage: build
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
-  variables:
-    BUILD_ARCH: arm64
-    CONFIG: defconfig
-    CONFIG_LOC: intree
-    DEVICES: r8a774c0-ek874 r8a774a1-hihope-rzg2m-ex
-    DTBS: r8a774c0-ek874.dtb r8a774a1-hihope-rzg2m-ex.dtb
-  script:
-    - /opt/build_kernel.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-test:arm64_defconfig:
-  stage: test
-  needs: ["build:arm64_defconfig"]
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  variables:
-    GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
-  script:
-    - /opt/submit_tests.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
Signature · 1 line
2.17.1
#10 lore raw

PATCH 2/3 gitlab-ci: Remove unofficial build configurations

In reply to Chris Paterson

We should concentrate our testing on the offical configurations. We're essentially testing shmobile_defconfig anyway.

---
 .gitlab-ci.yml | 35 -----------------------------------
 1 file changed, 35 deletions(-)
.gitlab-ci.yml +0 -35
index 73cea6bbce89..3ec65a007646 100644
@@ -278,38 +278,3 @@ build:x86_toshiba_defconfig:
     when: always
     paths:
       - output
-
-########################
-# Extra configurations #
-########################
-build:arm_shmobile_defconfig:
-  stage: build
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
-  variables:
-    BUILD_ARCH: arm
-    CONFIG: shmobile_defconfig
-    CONFIG_LOC: intree
-    DEVICES: r8a7743-iwg20d-q7 r8a7745-iwg22d-sodimm r8a77470-iwg23s-sbc
-    DTBS: r8a7743-iwg20d-q7-dbcm-ca.dtb r8a7745-iwg22d-sodimm-dbhd-ca.dtb r8a77470-iwg23s-sbc.dtb
-  script:
-    - /opt/build_kernel.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-test:arm_shmobile_defconfig:
-  stage: test
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  when: always
-  variables:
-    GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
-  script:
-    - /opt/submit_tests.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
Signature · 1 line
2.17.1
#11 lore raw

PATCH 2/3 gitlab-ci: Remove unofficial build configurations

In reply to Chris Paterson

We should concentrate our testing on the offical configurations. We're essentially testing shmobile_defconfig anyway.

---
 .gitlab-ci.yml | 35 -----------------------------------
 1 file changed, 35 deletions(-)
.gitlab-ci.yml +0 -35
index fcbfdd0b2197..bb7af78a5978 100644
@@ -297,38 +297,3 @@ build:rt_x86_siemens_i386-rt.config:
     when: always
     paths:
       - output
-
-########################
-# Extra configurations #
-########################
-build:arm_shmobile_defconfig:
-  stage: build
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
-  variables:
-    BUILD_ARCH: arm
-    CONFIG: shmobile_defconfig
-    CONFIG_LOC: intree
-    DEVICES: r8a7743-iwg20d-q7 r8a7745-iwg22d-sodimm r8a77470-iwg23s-sbc
-    DTBS: r8a7743-iwg20d-q7-dbcm-ca.dtb r8a7745-iwg22d-sodimm-dbhd-ca.dtb r8a77470-iwg23s-sbc.dtb
-  script:
-    - /opt/build_kernel.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
-
-test:arm_shmobile_defconfig:
-  stage: test
-  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  when: always
-  variables:
-    GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
-  script:
-    - /opt/submit_tests.sh
-  artifacts:
-    name: "$CI_JOB_NAME"
-    when: always
-    paths:
-      - output
Signature · 1 line
2.17.1
#12 lore raw

PATCH 3/3 gitlab-ci: Remove test timeout

In reply to Chris Paterson

Setting a relevant test timeout is hard as we've no idea how many other test jobs are running.

We have another two timeouts already:
1) The CI job timeut setting in the GitLab runner
2) The LAVA test job timeout

---
 .gitlab-ci.yml | 2 --
 1 file changed, 2 deletions(-)
.gitlab-ci.yml +0 -2
index d297f3deaced..3e6d493bbc89 100644
@@ -78,7 +78,6 @@ test:arm_renesas_shmobile_defconfig:
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
   variables:
     GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
   script:
     - /opt/submit_tests.sh
   artifacts:
@@ -142,7 +141,6 @@ test:arm64_renesas_defconfig:
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
   variables:
     GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
   script:
     - /opt/submit_tests.sh
   artifacts:
Signature · 1 line
2.17.1
#13 lore raw

PATCH 3/3 gitlab-ci: Remove test timeout

In reply to Chris Paterson

Setting a relevant test timeout is hard as we've no idea how many other test jobs are running.

We have another two timeouts already:
1) The CI job timeut setting in the GitLab runner
2) The LAVA test job timeout

---
 .gitlab-ci.yml | 2 --
 1 file changed, 2 deletions(-)
.gitlab-ci.yml +0 -2
index 7ebd29b94c3a..08b3913d295e 100644
@@ -78,7 +78,6 @@ test:arm_renesas_shmobile_defconfig:
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
   variables:
     GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
   script:
     - /opt/submit_tests.sh
   artifacts:
@@ -142,7 +141,6 @@ test:arm64_renesas_defconfig:
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
   variables:
     GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
   script:
     - /opt/submit_tests.sh
   artifacts:
Signature · 1 line
2.17.1
#14 lore raw

PATCH 3/3 gitlab-ci: Remove test timeout

In reply to Chris Paterson

Setting a relevant test timeout is hard as we've no idea how many other test jobs are running.

We have another two timeouts already:
1) The CI job timeut setting in the GitLab runner
2) The LAVA test job timeout

---
 .gitlab-ci.yml | 1 -
 1 file changed, 1 deletion(-)
.gitlab-ci.yml +0 -1
index 3ec65a007646..1abe0735326c 100644
@@ -62,7 +62,6 @@ test:arm_renesas_shmobile_defconfig:
   when: always
   variables:
     GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
   script:
     - /opt/submit_tests.sh
   artifacts:
Signature · 1 line
2.17.1
#15 lore raw

PATCH 3/3 gitlab-ci: Remove test timeout

In reply to Chris Paterson

Setting a relevant test timeout is hard as we've no idea how many other test jobs are running.

We have another two timeouts already:
1) The CI job timeut setting in the GitLab runner
2) The LAVA test job timeout

---
 .gitlab-ci.yml | 1 -
 1 file changed, 1 deletion(-)
.gitlab-ci.yml +0 -1
index bb7af78a5978..6ff8f4e516c1 100644
@@ -62,7 +62,6 @@ test:arm_renesas_shmobile_defconfig:
   when: always
   variables:
     GIT_STRATEGY: none
-    TEST_TIMEOUT: 60
   script:
     - /opt/submit_tests.sh
   artifacts:
Signature · 1 line
2.17.1
#16 lore raw

[cip-dev] Rethinking .yml files in the repositories was Re: [PATCH linux-4.19.y-cip 1/3] gitlab-ci: Split tests into separate jobs

In reply to Chris Paterson

Hi!

Quoted 5 lines

This will allow tests to run as soon as the corresponding build job is complete.

This will help spread the load on the test infrastructure and save time.

When we agreed to merge .yml files into the git, I was assuming they would be kind of static... but apparently that was wrong assumption.

It seems the .yml needs to change as boards are added/removed and as our test infrastructure changes.

There are complications we did not foresee: these updates are made in parallel to -cip and -cip-rt trees. That unfortunately means, that when I'm updating -cip-rt tree, each of them tends to show up as a conflict. And then, when updating -cip-rt-rebase, I get to solve them again.

Which is not fun and it makes history more complex than it should have been. Jan already expressed concerns about too much churn.

So... there was proposal with separate repository for testing. I believe we need to explore that.

Best regards,
Pavel

Quoted 193 lines
---
 .gitlab-ci.yml | 84 +++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 66 insertions(+), 18 deletions(-)
.gitlab-ci.yml +66 -18
index ba8b75abaee7..b72f0325435a 100644
@@ -4,8 +4,10 @@ variables:
   DOCKER_DRIVER: overlay2
   DOCKER_IMAGE_TAG: v2
 
-# Building
-arm_hitachi_cyclonev_defconfig:
+###############################
+# Standard CIP configurations #
+###############################
+build:arm_hitachi_cyclonev_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -21,7 +23,7 @@ arm_hitachi_cyclonev_defconfig:
     paths:
       - output
 
-arm_hitachi_omap_defconfig:
+build:arm_hitachi_omap_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -37,7 +39,7 @@ arm_hitachi_omap_defconfig:
     paths:
       - output
 
-arm_moxa_mxc_defconfig:
+build:arm_moxa_mxc_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -53,7 +55,7 @@ arm_moxa_mxc_defconfig:
     paths:
       - output
 
-arm_renesas_shmobile_defconfig:
+build:arm_renesas_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -70,7 +72,22 @@ arm_renesas_shmobile_defconfig:
     paths:
       - output
 
-arm_siemens_imx6.config:
+test:arm_renesas_shmobile_defconfig:
+  stage: test
+  needs: ["build:arm_renesas_shmobile_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm_siemens_imx6.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -86,7 +103,7 @@ arm_siemens_imx6.config:
     paths:
       - output
 
-arm64_moxa_eds_defconfig:
+build:arm64_moxa_eds_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -102,7 +119,7 @@ arm64_moxa_eds_defconfig:
     paths:
       - output
 
-arm64_renesas_defconfig:
+build:arm64_renesas_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -119,7 +136,22 @@ arm64_renesas_defconfig:
     paths:
       - output
 
-x86_plathome_obsvx2.config:
+test:arm64_renesas_defconfig:
+  stage: test
+  needs: ["build:arm64_renesas_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:x86_plathome_obsvx2.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -135,7 +167,7 @@ x86_plathome_obsvx2.config:
     paths:
       - output
 
-x86_siemens_iot2000.config:
+build:x86_siemens_iot2000.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -151,7 +183,7 @@ x86_siemens_iot2000.config:
     paths:
       - output
 
-x86_siemens_server_defconfig:
+build:x86_siemens_server_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -167,7 +199,7 @@ x86_siemens_server_defconfig:
     paths:
       - output
 
-x86_toshiba_atom_baytrail_cip.config:
+build:x86_toshiba_atom_baytrail_cip.config:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -183,8 +215,10 @@ x86_toshiba_atom_baytrail_cip.config:
     paths:
       - output
 
-# Extra build configurations
-arm_shmobile_defconfig:
+########################
+# Extra configurations #
+########################
+build:arm_shmobile_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -201,7 +235,22 @@ arm_shmobile_defconfig:
     paths:
       - output
 
-arm64_defconfig:
+test:arm_shmobile_defconfig:
+  stage: test
+  needs: ["build:arm_shmobile_defconfig"]
+  image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
+  variables:
+    GIT_STRATEGY: none
+    TEST_TIMEOUT: 60
+  script:
+    - /opt/submit_tests.sh
+  artifacts:
+    name: "$CI_JOB_NAME"
+    when: always
+    paths:
+      - output
+
+build:arm64_defconfig:
   stage: build
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:build-$DOCKER_IMAGE_TAG
   variables:
@@ -218,11 +267,10 @@ arm64_defconfig:
     paths:
       - output
 
-# Testing
-run_tests:
+test:arm64_defconfig:
   stage: test
+  needs: ["build:arm64_defconfig"]
   image: registry.gitlab.com/cip-project/cip-testing/linux-cip-ci:test-$DOCKER_IMAGE_TAG
-  when: always
   variables:
     GIT_STRATEGY: none
     TEST_TIMEOUT: 60
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20191014/1ec88db6/attachment.sig>
#17 lore raw

[cip-dev] Rethinking .yml files in the repositories was Re: [PATCH linux-4.19.y-cip 1/3] gitlab-ci: Split tests into separate jobs

Hello Pavel, all,

Quoted 8 lines

From: Pavel Machek <[email protected]>
Sent: 14 October 2019 08:34

Hi!

Quoted 3 lines

This will allow tests to run as soon as the corresponding build job is complete.

Quoted 8 lines
Quoted 2 lines

This will help spread the load on the test infrastructure and save time.

When we agreed to merge .yml files into the git, I was assuming they would be kind of static... but apparently that was wrong assumption.

It seems the .yml needs to change as boards are added/removed and as our test infrastructure changes.

Yep.

Quoted 6 lines

There are complications we did not foresee: these updates are made in parallel to -cip and -cip-rt trees. That unfortunately means, that when I'm updating -cip-rt tree, each of them tends to show up as a conflict. And then, when updating -cip-rt-rebase, I get to solve them again.

Yes, this is an issue. Although I guess it's a fairly easy merge, albeit an annoying one.

Quoted 3 lines

Which is not fun and it makes history more complex than it should have been. Jan already expressed concerns about too much churn.

Agreed, it's not ideal.

Quoted 3 lines

So... there was proposal with separate repository for testing. I believe we need to explore that.

We can, and I already have a bit with the LTS stable rc testing.

The main problem with using a separate GitLab project to run the CI is that it's very difficult to see in the GitLab CI interface what commit etc. was actually tested. The GitLab interface only shows the commit tested from the 'CI' project, not the project that was being built.
Please see [0] for an example, compared to a similar run where the CI is run from the same project as the source [1].

[0] https://gitlab.com/cip-playground/linux-stable-rc-ci/pipelines/88564586
[1] https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/88520104

Some options, I'm sure there will be many more...
1) Stick with the current approach and rely on the maintainer to fix the gitlab-ci patches for RT. Fingers crossed for the next CIP Kernel we won't need a separate RT branch anyway. Actually, I'm pretty sure I can find a way to modify the gitlab-ci.yml file so the same one can be used for RT and non-RT branches.
This would help with the RT merge issues, but won't help with the churn (although the churn should die down after a while).

2) Use a separate GitLab repository for CI work and use a different front end to view the CI results (e.g. KernelCI).

3) Stop using GitLab entirely and use another external CI setup like Jenkins.

Any thoughts?

Kind regards, Chris