Skip to contentSkip to conversation

imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5

PATCH New Lukasz Majewski 2 participants 2 messages Oct 14, 2019 – Nov 4, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5

After the following commit:
commit 772b55723bcb ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode")
it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows using MMC device as boot device regardless of the device used by Boot ROM (FBL) as the first boot medium.

Display5 board needs this flag set to allow falcon boot from eMMC device.

---

 configs/display5_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/display5_defconfig +1 -0
index 3227249413e4..91b369532d94 100644
@@ -30,6 +30,7 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SAVEENV=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_FORCE_MMC_BOOT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/1 imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5

Quoted 8 lines

After the following commit:
commit 772b55723bcb ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode")
it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows using MMC device as boot device regardless of the device used by Boot ROM (FBL) as the first boot medium.
Display5 board needs this flag set to allow falcon boot from eMMC device.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================