arm: add initial support for the Phytium FT2004 SoC
PATCH v2 1/1 arm: add initial support for the Phytium FT2004 SoC
This adds platform code and the device tree for the Phytium FT2004 SoC. The initial support comprises the UART and the GMAC.
v2:
- Some printf() are removed or replace by debug(). @Tom
- The ft2004_defconfig file is generated with savedefconfig. @Tom, @Heinrich
--- MAINTAINERS | 6 +++ arch/arm/Kconfig | 8 ++++ arch/arm/dts/Makefile | 2 + arch/arm/dts/phytium-ft2004.dts | 33 ++++++++++++++ board/phytium/ft2004/Kconfig | 12 +++++ board/phytium/ft2004/MAINTAINERS | 8 ++++ board/phytium/ft2004/Makefile | 9 ++++ board/phytium/ft2004/cpu.h | 23 ++++++++++ board/phytium/ft2004/ft2004.c | 95 ++++++++++++++++++++++++++++++++++++++++ configs/ft2004_defconfig | 23 ++++++++++ include/configs/ft2004.h | 24 ++++++++++ 11 files changed, 243 insertions(+) create mode 100644 arch/arm/dts/phytium-ft2004.dts create mode 100644 board/phytium/ft2004/Kconfig create mode 100644 board/phytium/ft2004/MAINTAINERS create mode 100644 board/phytium/ft2004/Makefile create mode 100644 board/phytium/ft2004/cpu.h create mode 100644 board/phytium/ft2004/ft2004.c create mode 100644 configs/ft2004_defconfig create mode 100644 include/configs/ft2004.h
MAINTAINERS +6 -0
@@ -468,6 +468,12 @@ S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git F: arch/arm/mach-zynqmp-r5/ +ARM PHYTIUM +M: liuhao <[email protected]> +M: shuyiqi <[email protected]> +S: Maintained +F: arch/arm/dts/phytium-ft2004.dts + BINMAN M: Simon Glass <[email protected]> S: Maintained
arch/arm/Kconfig +8 -0
@@ -1612,6 +1612,13 @@ config ARCH_ASPEED select OF_CONTROL imply CMD_DM +config TARGET_FT2004 + bool "Support Phytium FT2004 Platform" + select ARM64 + help + Support for FT2004 platform. + It has 1GB Sdram, uart and gmac. + endchoice config ARCH_SUPPORT_TFABOOT
@@ -1812,6 +1819,7 @@ source "board/woodburn/Kconfig" source "board/xilinx/Kconfig" source "board/xilinx/zynq/Kconfig" source "board/xilinx/zynqmp/Kconfig" +source "board/phytium/ft2004/Kconfig" source "arch/arm/Kconfig.debug"
arch/arm/dts/Makefile +2 -0
@@ -816,6 +816,8 @@ dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb +dtb-$(CONFIG_TARGET_FT2004) += phytium-ft2004.dtb + targets += $(dtb-y) # Add any required device tree compiler flags here
arch/arm/dts/phytium-ft2004.dts new file +33 -0
@@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Phytium Ltd. + * shuyiqi <[email protected]> + */ + +/dts-v1/; + +/ { + model = "Phytium FT2004"; + compatible = "phytium,ft2004"; + #address-cells = <2>; + #size-cells = <2>; + + ethernet at 2820c000 { + compatible = "st,stm32-dwmac"; + reg = <0x0 0x2820C000 0x0 0x2000>; + phy-mode = "rgmii"; + }; + + ethernet at 28210000 { + compatible = "st,stm32-dwmac"; + reg = <0x0 0x28210000 0x0 0x2000>; + phy-mode = "rgmii"; + }; + + uart at 28001000 { + compatible = "arm,pl011"; + reg = <0x0 0x28001000 0x0 0x1000>; + clock = <48000000>; + }; +}; +
board/phytium/ft2004/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_FT2004 + +config SYS_BOARD + default "ft2004" + +config SYS_VENDOR + default "phytium" + +config SYS_CONFIG_NAME + default "ft2004" + +endif
board/phytium/ft2004/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +FT2004 BOARD +M: liuhao <[email protected]> +M: shuyiqi <[email protected]> +S: Maintained +F: board/phytium/ft2004/* +F: include/configs/ft2004.h +F: configs/ft2004_defconfig +
board/phytium/ft2004/Makefile new file +9 -0
@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2019 +# shuyiqi <[email protected]> +# liuhao <[email protected]> +# + +obj-y += ft2004.o +
board/phytium/ft2004/cpu.h new file +23 -0
@@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2019 +* Phytium Technology Ltd <www.phytium.com> +* shuyiqi <[email protected]> +*/ + +#ifndef _FT2004_CPU_H +#define _FT2004_CPU_H + +/* FLUSH L3 CASHE */ +#define HNF_COUNT 0x8 +#define HNF_PSTATE_REQ (HNF_BASE + 0x10) +#define HNF_PSTATE_STAT (HNF_BASE + 0x18) +#define HNF_PSTATE_OFF 0x0 +#define HNF_PSTATE_SFONLY 0x1 +#define HNF_PSTATE_HALF 0x2 +#define HNF_PSTATE_FULL 0x3 +#define HNF_STRIDE 0x10000 +#define HNF_BASE (unsigned long)(0x3A200000) + +#endif /* _FT2004_CPU_H */ +
board/phytium/ft2004/ft2004.c new file +95 -0
95 lines not on this page · raw message
configs/ft2004_defconfig new file +23 -0
@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_ARM_SMCCC=y +CONFIG_TARGET_FT2004=y +CONFIG_SYS_TEXT_BASE=0x88000000 +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_PSCI_RESET is not set +CONFIG_AHCI=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_PROMPT="ft2004#" +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="phytium-ft2004" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +# CONFIG_MMC is not set +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_PL01X_SERIAL=y
include/configs/ft2004.h new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2019 +* shuyiqi <[email protected]> +* liuhao <[email protected]> +*/ + +#ifndef __FT_2004_CONFIG_H__ +#define __FT_2004_CONFIG_H__ + +/* Sdram Bank #1 Address */ +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE 0x7B000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000000) + +/* Size of Malloc Pool */ +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024 + CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x100000) + +#endif
Signature · 1 line
2.7.4
PATCH v2 1/1 arm: add initial support for the Phytium FT2004 SoC
Hi Steven,
Quoted 11 lines · liu hao
This adds platform code and the device tree for the Phytium FT2004 SoC. The initial support comprises the UART and the GMAC.
v2:
- Someprintf()are removed or replace bydebug(). @Tom
- Theft2004_defconfigfile is generated with savedefconfig. @Tom, @HeinrichCc Tom Rini <[email protected]>Cc Heinrich Schuchardt <[email protected]>
Quoted 6 lines
Signed-off-by Steven Hao <[email protected]>--- MAINTAINERS | 6 +++ arch/arm/Kconfig | 8 ++++ arch/arm/dts/Makefile | 2 + arch/arm/dts/phytium-ft2004.dts | 33 ++++++++++++++
Does the dts on mainline Kernel? If yes, it will be better to have a commit link of kernel version,
and patch will be better as separate patch.
Quoted 6 lines
board/phytium/ft2004/Kconfig | 12 +++++ board/phytium/ft2004/MAINTAINERS | 8 ++++ board/phytium/ft2004/Makefile | 9 ++++ board/phytium/ft2004/cpu.h | 23 ++++++++++ board/phytium/ft2004/ft2004.c | 95 ++++++++++++++++++++++++++++++++++++++++ configs/ft2004_defconfig | 23 ++++++++++
Seems like the ft2004 is a SoC, do you have a board name for it? The config is more about
BOARD instead of SOC.
Thanks,
- Kever
Quoted 342 lines
include/configs/ft2004.h | 24 ++++++++++ 11 files changed, 243 insertions(+)create mode 100644
arch/arm/dts/phytium-ft2004.dtscreate mode 100644 board/phytium/ft2004/Kconfig create mode 100644 board/phytium/ft2004/MAINTAINERS create mode 100644 board/phytium/ft2004/Makefile create mode 100644board/phytium/ft2004/cpu.hcreate mode 100644board/phytium/ft2004/ft2004.ccreate mode 100644 configs/ft2004_defconfig create mode 100644include/configs/ft2004.hMAINTAINERS +6
-0@@ -468,6 +468,12 @@ S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git F: arch/arm/mach-zynqmp-r5/ +ARM PHYTIUM +M: liuhao <[email protected]> +M: shuyiqi <[email protected]> +S: Maintained +F: arch/arm/dts/phytium-ft2004.dts + BINMAN M: Simon Glass <[email protected]> S: Maintainedarch/arm/Kconfig +8
-0@@ -1612,6 +1612,13 @@ config ARCH_ASPEED select OF_CONTROL imply CMD_DM +config TARGET_FT2004 + bool "Support Phytium FT2004 Platform" + select ARM64 + help + Support for FT2004 platform. + It has 1GB Sdram, uart and gmac. + endchoice config ARCH_SUPPORT_TFABOOT@@ -1812,6 +1819,7 @@ source "board/woodburn/Kconfig" source "board/xilinx/Kconfig" source "board/xilinx/zynq/Kconfig" source "board/xilinx/zynqmp/Kconfig" +source "board/phytium/ft2004/Kconfig" source "arch/arm/Kconfig.debug"arch/arm/dts/Makefile +2
-0@@ -816,6 +816,8 @@ dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb +dtb-$(CONFIG_TARGET_FT2004) += phytium-ft2004.dtb + targets += $(dtb-y) # Add any required device tree compiler flags herearch/arm/dts/phytium-ft2004.dts new file +33
-0@@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Phytium Ltd. + * shuyiqi <[email protected]> + */ + +/dts-v1/; + +/ { + model = "Phytium FT2004"; + compatible = "phytium,ft2004"; + #address-cells = <2>; + #size-cells = <2>; + + ethernet at 2820c000 { + compatible = "st,stm32-dwmac"; + reg = <0x0 0x2820C000 0x0 0x2000>; + phy-mode = "rgmii"; + }; + + ethernet at 28210000 { + compatible = "st,stm32-dwmac"; + reg = <0x0 0x28210000 0x0 0x2000>; + phy-mode = "rgmii"; + }; + + uart at 28001000 { + compatible = "arm,pl011"; + reg = <0x0 0x28001000 0x0 0x1000>; + clock = <48000000>; + }; +}; +board/phytium/ft2004/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_FT2004 + +config SYS_BOARD + default "ft2004" + +config SYS_VENDOR + default "phytium" + +config SYS_CONFIG_NAME + default "ft2004" + +endifboard/phytium/ft2004/MAINTAINERS new file +8
-0@@ -0,0 +1,8 @@ +FT2004 BOARD +M: liuhao <[email protected]> +M: shuyiqi <[email protected]> +S: Maintained +F: board/phytium/ft2004/* +F: include/configs/ft2004.h +F: configs/ft2004_defconfig +board/phytium/ft2004/Makefile new file +9
-0@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2019 +# shuyiqi <[email protected]> +# liuhao <[email protected]> +# + +obj-y += ft2004.o +board/phytium/ft2004/cpu.h new file +23
-0@@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2019 +* Phytium Technology Ltd <www.phytium.com> +* shuyiqi <[email protected]> +*/ + +#ifndef _FT2004_CPU_H +#define _FT2004_CPU_H + +/* FLUSH L3 CASHE */ +#define HNF_COUNT 0x8 +#define HNF_PSTATE_REQ (HNF_BASE + 0x10) +#define HNF_PSTATE_STAT (HNF_BASE + 0x18) +#define HNF_PSTATE_OFF 0x0 +#define HNF_PSTATE_SFONLY 0x1 +#define HNF_PSTATE_HALF 0x2 +#define HNF_PSTATE_FULL 0x3 +#define HNF_STRIDE 0x10000 +#define HNF_BASE (unsigned long)(0x3A200000) + +#endif /* _FT2004_CPU_H */ +board/phytium/ft2004/ft2004.c new file +95
-0@@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 +* shuyiqi <[email protected]> +* liuhao <[email protected]> +*/ + +#include <common.h> +#include <asm/armv8/mmu.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/arm-smccc.h> +#include <linux/kernel.h> +#include <scsi.h> +#include "cpu.h" + +DECLARE_GLOBAL_DATA_PTR ; + +int dram_init (void ) +{ + gd->mem_clk =0 ; + gd->ram_size =PHYS_SDRAM_1_SIZE ; +return 0 ; +} + +int dram_init_banksize (void ) +{ + gd->bd->bi_dram[0 ].start =PHYS_SDRAM_1 ; + gd->bd->bi_dram[0 ].size =PHYS_SDRAM_1_SIZE ; + +return 0 ; +} + +int board_init (void ) +{ +return 0 ; +} + +void reset_cpu (ulong addr) +{ +struct arm_smccc_res res; + +arm_smccc_smc (0x84000009 ,0 ,0 ,0 ,0 ,0 ,0 ,0 , &res); +debug ("reset cpu error, %lx\n" , res.a0); +} + +static struct mm_region ft2004_mem_map[] = { + { + .virt =0x0UL , + .phys =0x0UL , + .size =0x80000000UL , + .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | +PTE_BLOCK_NON_SHARE | +PTE_BLOCK_PXN | +PTE_BLOCK_UXN + }, + { + .virt = (u64 )PHYS_SDRAM_1 , + .phys = (u64 )PHYS_SDRAM_1 , + .size = (u64 )PHYS_SDRAM_1_SIZE , + .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | +PTE_BLOCK_NS | +PTE_BLOCK_INNER_SHARE + }, + { +0 , + } +}; + +struct mm_region *mem_map = ft2004_mem_map; + +int print_cpuinfo (void ) +{ +printf ("CPU: Phytium ft2004 %ld MHz\n" , gd->cpu_clk); +return 0 ; +} + +int __asm_flush_l3_dcache (void ) +{ +int i, pstate; + +for (i =0 ; i <HNF_COUNT ; i++) +writeq (HNF_PSTATE_SFONLY ,HNF_PSTATE_REQ + i *HNF_STRIDE ); +for (i =0 ; i <HNF_COUNT ; i++) { +do { + pstate =readq (HNF_PSTATE_STAT + i *HNF_STRIDE ); + }while ((pstate &0xf ) != (HNF_PSTATE_SFONLY <<2 )); + } + +for (i =0 ; i <HNF_COUNT ; i++) +writeq (HNF_PSTATE_FULL ,HNF_PSTATE_REQ + i *HNF_STRIDE ); + +return 0 ; +} +configs/ft2004_defconfig new file +23
-0@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_ARM_SMCCC=y +CONFIG_TARGET_FT2004=y +CONFIG_SYS_TEXT_BASE=0x88000000 +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_PSCI_RESET is not set +CONFIG_AHCI=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_PROMPT="ft2004#" +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="phytium-ft2004" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +# CONFIG_MMC is not set +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_PL01X_SERIAL=yinclude/configs/ft2004.h new file +24
-0@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2019 +* shuyiqi <[email protected]> +* liuhao <[email protected]> +*/ + +#ifndef __FT_2004_CONFIG_H__ +#define __FT_2004_CONFIG_H__ + +/* Sdram Bank #1 Address */ +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE 0x7B000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000000) + +/* Size of Malloc Pool */ +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024 + CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x100000) + +#endif
PATCH v2 1/1 arm: add initial support for the Phytium FT2004 SoC
In reply to liu haoQuoted 10 lines · liu hao
This adds platform code and the device tree for the Phytium FT2004 SoC. The initial support comprises the UART and the GMAC.
v2:
- Someprintf()are removed or replace bydebug(). @Tom
- Theft2004_defconfigfile is generated with savedefconfig. @Tom, @HeinrichCc Tom Rini <[email protected]>Cc Heinrich Schuchardt <[email protected]>
Aside from the feedback others have given, can you please provide some links about this platform and how it's booted? This seems very skeleton and I assume there's ATF doing a lot of other work here. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191014/a22a184e/attachment.sig>