ata: fsl_sata: Add sata DM support for Freescale powerpc
PATCH 1/2 ata: fsl_sata: Add sata DM support for Freescale powerpc
T series socs
This patch is to support Freescale sata driver with dts initialized. We needed to enable CONFIG_BLK on this platform. It adds the SATA controller as AHCI device, which is strictly speaking not correct, as the controller is not AHCI compatible. But the U-Boot AHCI uclass interface enables the usage of this DM driver.
Also resolved the following problems.
===================== WARNING ======================" This board does use CONFIG_LIBATA but has CONFIG_AHCI not" enabled. Please update the storage controller driver to use" CONFIG_AHCI before the v2019.07 release."
Failure to update by the deadline may result in board removal." See doc/driver-model/MIGRATION.txt for more info." ===================================================="
--- drivers/ata/Kconfig | 1 + drivers/ata/fsl_sata.c | 296 +++++++++++++++++++++++++++++++++++-------------- drivers/ata/fsl_sata.h | 10 ++ 3 files changed, 222 insertions(+), 85 deletions(-)
drivers/ata/Kconfig +1 -0
@@ -87,6 +87,7 @@ config DWC_AHSATA_AHCI config FSL_SATA bool "Enable Freescale SATA controller driver support" select LIBATA + select AHCI if BLK help Enable this driver to support the SATA controller found in some Freescale PowerPC SoCs.
drivers/ata/fsl_sata.c +211 -85
474 lines not on this page · raw message
drivers/ata/fsl_sata.h +10 -0
@@ -318,4 +318,14 @@ typedef struct fsl_sata {#define READ_CMD 0#define WRITE_CMD 1 +#if CONFIG_IS_ENABLED (BLK ) +struct fsl_ata_priv { +u32 base; +u32 flag; +u32 number; +u32 offset; +fsl_sata_t *fsl_sata; +}; +#endif +#endif /* __FSL_SATA_H__ */
Signature · 1 line
2.9.5
PATCH 2/2 ata: sata_sil: Add sata DM support for Silicon driver
This patch is to support Silicon(SIL3131 / SIL3132 / SIL3124) sata driver with dts initialized.
This changed same as fsl_sata.c some of our socs need to use this driver such as P series platforms.
Also resolved the following problems.
===================== WARNING ======================" This board does use CONFIG_LIBATA but has CONFIG_AHCI not" enabled. Please update the storage controller driver to use" CONFIG_AHCI before the v2019.07 release."
Failure to update by the deadline may result in board removal." See doc/driver-model/MIGRATION.txt for more info." ===================================================="
--- drivers/ata/Kconfig | 1 + drivers/ata/sata_sil.c | 538 +++++++++++++++++++++++++++++++------------------ drivers/ata/sata_sil.h | 13 +- 3 files changed, 355 insertions(+), 197 deletions(-)
drivers/ata/Kconfig +1 -0
@@ -110,6 +110,7 @@ config SATA_MV config SATA_SIL bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support" select LIBATA + select AHCI if BLK help Enable this driver to support the SIL3131, SIL3132 and SIL3124 SATA controllers.
drivers/ata/sata_sil.c +343 -195
772 lines not on this page · raw message
drivers/ata/sata_sil.h +11 -2
@@ -13,7 +13,7 @@/* * SATA device driver struct for each dev */ -struct sil_sata { +typedef struct sil_sata { char name[12]; void *port; /* the port base address */ int lba48;
@@ -24,7 +24,8 @@ struct sil_sata {int wcache;int flush;int flush_ext; -}; +int id; +} sil_sata_t;/* sata info for each controller */ struct sata_info {
@@ -210,4 +211,12 @@ enum { CMD_ERR = 0x21, }; +#if CONFIG_IS_ENABLED (BLK ) +#define ATA_MAX_PORTS 32 +struct sil_sata_priv { +int port_num; +sil_sata_t *sil_sata_desc[ATA_MAX_PORTS ]; +}; +#endif +#endif
Signature · 1 line
2.9.5