Skip to contentSkip to conversation

travis: Split i.MX jobs a bit more

PATCH New Tom Rini 3 participants 12 messages Oct 15, 2019 – Oct 17, 2019

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

PATCH 1/3 travis: Split i.MX jobs a bit more

- Split "tqc" and "technexion" out into their own jobs and exclude them from the catch-all jobs
- Clarify the job labels a little more.

Cc Stefano Babic <[email protected]>
---
 .travis.yml | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
.travis.yml +10 -4
index 9ca750e5759f..b3105fd3f60e 100644
@@ -204,12 +204,15 @@ matrix:
     - name: "buildman NXP AArch64 LX216x"
       env:
         - BUILDMAN="freescale&aarch64&lx216"
-    - name: "buildman i.MX6 (non-NXP)"
+    - name: "buildman i.MX6 tqc"
       env:
-        - BUILDMAN="mx6 -x freescale,toradex,boundary,engicam"
-    - name: "buildman i.MX (non-NXP,i.MX6,toradex)"
+        - BUILDMAN="mx6&tqc"
+    - name: "buildman i.MX6 (catch-all)"
       env:
-        - BUILDMAN="mx -x freescale,mx6,toradex"
+        - BUILDMAN="mx6 -x boundary,engicam,freescale,technexion,toradex,tqc"
+    - name: "buildman i.MX (non-i.MX6 catch-all)"
+      env:
+        - BUILDMAN="mx -x freescale,mx6,toradex,technexion"
     - name: "buildman keystone 2/3"
       env:
         - BUILDMAN="k2 k3"
@@ -247,6 +250,9 @@ matrix:
       env:
         - BUILDMAN="sandbox x86"
           TOOLCHAIN="i386"
+    - name: "buildman technexion"
+      env:
+        - BUILDMAN="technexion"
     - name: "buildman kirkwood"
       env:
         - BUILDMAN="kirkwood"
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH 1/3 travis: Split i.MX jobs a bit more

Quoted 7 lines · Tom Rini

- Split "tqc" and "technexion" out into their own jobs and exclude them from the catch-all jobs
- Clarify the job labels a little more.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191017/9399606a/attachment.sig>
author
#2 lore raw

PATCH 2/3 travis: Split sun8i in to two jobs

In reply to Tom Rini

Split the 32bit and 64bit platforms into separate jobs, to avoid them taking too long to build overall.

---
 .travis.yml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
.travis.yml +5 -2
index b3105fd3f60e..ced44deb1b69 100644
@@ -234,9 +234,12 @@ matrix:
     - name: "buildman sun7i"
       env:
         - BUILDMAN="sun7i"
-    - name: "buildman sun8i"
+    - name: "buildman 64bit sun8i"
       env:
-        - BUILDMAN="sun8i"
+        - BUILDMAN="sun8i&aarch64"
+    - name: "buildman 32bit sun8i"
+      env:
+        - BUILDMAN="sun8i&armv7"
     - name: "buildman sun9i"
       env:
         - BUILDMAN="sun9i"
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH 2/3 travis: Split sun8i in to two jobs

Quoted 5 lines · Tom Rini

Split the 32bit and 64bit platforms into separate jobs, to avoid them taking too long to build overall.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191017/994da005/attachment.sig>
#4 lore raw

PATCH 1/3 travis: Split i.MX jobs a bit more

In reply to Tom Rini
Quoted 36 lines · Tom Rini

- Split "tqc" and "technexion" out into their own jobs and exclude them from the catch-all jobs
- Clarify the job labels a little more.

Cc Stefano Babic <[email protected]>
---
 .travis.yml | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
.travis.yml +7 -4
index 9ca750e5759f..b3105fd3f60e 100644
@@ -204,12 +204,15 @@ matrix:
     - name: "buildman NXP AArch64 LX216x"
       env:
         - BUILDMAN="freescale&aarch64&lx216"
-    - name: "buildman i.MX6 (non-NXP)"
+    - name: "buildman i.MX6 tqc"
       env:
-        - BUILDMAN="mx6 -x freescale,toradex,boundary,engicam"
-    - name: "buildman i.MX (non-NXP,i.MX6,toradex)"
+        - BUILDMAN="mx6&tqc"
+    - name: "buildman i.MX6 (catch-all)"
       env:
-        - BUILDMAN="mx -x freescale,mx6,toradex"
+        - BUILDMAN="mx6 -x boundary,engicam,freescale,technexion,toradex,tqc"
+    - name: "buildman i.MX (non-i.MX6 catch-all)"
+      env:
+        - BUILDMAN="mx -x freescale,mx6,toradex,technexion"
     - name: "buildman keystone 2/3"
       env:
         - BUILDMAN="k2 k3"

.travis.yml matrix: · line 258

Quoted 9 lines
.travis.yml +3 -0
@@ -247,6 +250,9 @@ matrix:
       env:
         - BUILDMAN="sandbox x86"
           TOOLCHAIN="i386"
+    - name: "buildman technexion"
+      env:
+        - BUILDMAN="technexion"
     - name: "buildman kirkwood"
       env:
         - BUILDMAN="kirkwood"

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#5 lore raw

PATCH 3/3 travis: Split and rename xilinx ARM in to two jobs

In reply to Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Cc Michal Simek <[email protected]>
---
 .travis.yml | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
.travis.yml +7 -4
index ced44deb1b69..d54f8b3b1e36 100644
@@ -248,7 +248,7 @@ matrix:
         - BUILDMAN="sun50i"
     - name: "buildman catch-all ARM"
       env:
-        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,xilinx"
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,zynq"
     - name: "buildman sandbox x86"
       env:
         - BUILDMAN="sandbox x86"
@@ -322,7 +322,7 @@ matrix:
         - BUILDMAN="uniphier"
     - name: "buildman catch-all AArch64"
       env:
-        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,zynq"
     - name: "buildman rockchip"
       env:
         - BUILDMAN="rockchip"
@@ -330,9 +330,12 @@ matrix:
       env:
         - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - name: "buildman Xilinx (ARM)"
+    - name: "buildman Zynq* (ARMv7)"
       env:
-        - BUILDMAN="xilinx -x microblaze"
+        - BUILDMAN="zynq&armv7"
+    - name: "buildman Zynq* (AArch64)"
+      env:
+        - BUILDMAN="zynq&aarch64"
     - name: "buildman xtensa"
       env:
         - BUILDMAN="xtensa"
Signature · 1 line
2.17.1
#6 lore raw

PATCH 3/3 travis: Split and rename xilinx ARM in to two jobs

Quoted 35 lines · Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Cc Michal Simek <[email protected]>
---
 .travis.yml | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
.travis.yml +2 -2
index ced44deb1b69..d54f8b3b1e36 100644
@@ -248,7 +248,7 @@ matrix:
         - BUILDMAN="sun50i"
     - name: "buildman catch-all ARM"
       env:
-        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,xilinx"
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,zynq"
     - name: "buildman sandbox x86"
       env:
         - BUILDMAN="sandbox x86"
@@ -322,7 +322,7 @@ matrix:
         - BUILDMAN="uniphier"
     - name: "buildman catch-all AArch64"
       env:
-        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,zynq"
     - name: "buildman rockchip"
       env:
         - BUILDMAN="rockchip"
@@ -330,9 +330,12 @@ matrix:
       env:

.travis.yml matrix: · line 338

Quoted 10 lines
.travis.yml +5 -2
         - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - name: "buildman Xilinx (ARM)"
+    - name: "buildman Zynq* (ARMv7)"
       env:
-        - BUILDMAN="xilinx -x microblaze"
+        - BUILDMAN="zynq&armv7"
+    - name: "buildman Zynq* (AArch64)"
+      env:
+        - BUILDMAN="zynq&aarch64"

This is not exactly what was written above because it versal is missing. It means here should be zynq at aarch64 or better zynqmp at aarch64 versal at aarch64

Thanks,
Michal

author
#7 lore raw

PATCH 3/3 travis: Split and rename xilinx ARM in to two jobs

Quoted 41 lines · Michal Simek
Quoted 40 lines · Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Cc Michal Simek <[email protected]>
---
 .travis.yml | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
.travis.yml +3 -3
index ced44deb1b69..d54f8b3b1e36 100644
@@ -248,7 +248,7 @@ matrix:
         - BUILDMAN="sun50i"
     - name: "buildman catch-all ARM"
       env:
-        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,xilinx"
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,zynq"
     - name: "buildman sandbox x86"
       env:
         - BUILDMAN="sandbox x86"
@@ -322,7 +322,7 @@ matrix:
         - BUILDMAN="uniphier"
     - name: "buildman catch-all AArch64"
       env:
-        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,zynq"
     - name: "buildman rockchip"
       env:
         - BUILDMAN="rockchip"
@@ -330,9 +330,12 @@ matrix:
       env:
         - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - name: "buildman Xilinx (ARM)"
+    - name: "buildman Zynq* (ARMv7)"
       env:
Quoted 8 lines

.travis.yml matrix: · line 338

Quoted 5 lines
.travis.yml +4 -1
-        - BUILDMAN="xilinx -x microblaze"
+        - BUILDMAN="zynq&armv7"
+    - name: "buildman Zynq* (AArch64)"
+      env:
+        - BUILDMAN="zynq&aarch64"

This is not exactly what was written above because it versal is missing. It means here should be zynq at aarch64 or better zynqmp at aarch64 versal at aarch64

OK, thanks, v2 coming up. Note that versal would have been covered in the aarch64 catch-all job in v1.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191015/62fcb6a1/attachment.sig>
author
#8 lore raw

PATCH v2 3/3 travis: Split and rename xilinx ARM in to two jobs

In reply to Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Cc Michal Simek <[email protected]>
---
 .travis.yml | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
.travis.yml +7 -4
index ced44deb1b69..d54f8b3b1e36 100644
@@ -248,7 +248,7 @@ matrix:
         - BUILDMAN="sun50i"
     - name: "buildman catch-all ARM"
       env:
-        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,xilinx"
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,zynq"
     - name: "buildman sandbox x86"
       env:
         - BUILDMAN="sandbox x86"
@@ -322,7 +322,7 @@ matrix:
         - BUILDMAN="uniphier"
     - name: "buildman catch-all AArch64"
       env:
-        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,zynq"
     - name: "buildman rockchip"
       env:
         - BUILDMAN="rockchip"
@@ -330,9 +330,12 @@ matrix:
       env:
         - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - name: "buildman Xilinx (ARM)"
+    - name: "buildman Zynq* (ARMv7)"
       env:
-        - BUILDMAN="xilinx -x microblaze"
+        - BUILDMAN="zynq&armv7"
+    - name: "buildman Zynq* (AArch64)"
+      env:
+        - BUILDMAN="zynq&aarch64"
     - name: "buildman xtensa"
       env:
         - BUILDMAN="xtensa"
Signature · 1 line
2.17.1
author
#9 lore raw

PATCH v3 3/3 travis: Split and rename xilinx ARM in to two jobs

In reply to Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Cc Michal Simek <[email protected]>
---
 .travis.yml | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
.travis.yml +7 -4
index ced44deb1b69..b0ef0545f11a 100644
@@ -248,7 +248,7 @@ matrix:
         - BUILDMAN="sun50i"
     - name: "buildman catch-all ARM"
       env:
-        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,xilinx"
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,zynq"
     - name: "buildman sandbox x86"
       env:
         - BUILDMAN="sandbox x86"
@@ -322,7 +322,7 @@ matrix:
         - BUILDMAN="uniphier"
     - name: "buildman catch-all AArch64"
       env:
-        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,versal,zynq"
     - name: "buildman rockchip"
       env:
         - BUILDMAN="rockchip"
@@ -330,9 +330,12 @@ matrix:
       env:
         - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - name: "buildman Xilinx (ARM)"
+    - name: "buildman Zynq* (ARMv7)"
       env:
-        - BUILDMAN="xilinx -x microblaze"
+        - BUILDMAN="zynq&armv7"
+    - name: "buildman ZynqMP and Versal"
+      env:
+        - BUILDMAN="versal|zynqmp&aarch64"
     - name: "buildman xtensa"
       env:
         - BUILDMAN="xtensa"
Signature · 1 line
2.17.1
#10 lore raw

PATCH v3 3/3 travis: Split and rename xilinx ARM in to two jobs

Quoted 39 lines · Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Cc Michal Simek <[email protected]>
---
 .travis.yml | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
.travis.yml +2 -3
index ced44deb1b69..b0ef0545f11a 100644
@@ -248,7 +248,7 @@ matrix:
         - BUILDMAN="sun50i"
     - name: "buildman catch-all ARM"
       env:
-        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,xilinx"
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,k3,zynq"
     - name: "buildman sandbox x86"
       env:
         - BUILDMAN="sandbox x86"
@@ -322,7 +322,7 @@ matrix:
         - BUILDMAN="uniphier"
     - name: "buildman catch-all AArch64"
       env:
-        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+        - BUILDMAN="aarch64 -x bcm,k3,tegra,ls1,ls2,mvebu,uniphier,sunxi,samsung,rockchip,versal,zynq"
     - name: "buildman rockchip"
       env:
         - BUILDMAN="rockchip"
@@ -330,9 +330,12 @@ matrix:
       env:
         - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - name: "buildman Xilinx (ARM)"

.travis.yml matrix: · line 341

Quoted 10 lines
.travis.yml +5 -1
+    - name: "buildman Zynq* (ARMv7)"
       env:
-        - BUILDMAN="xilinx -x microblaze"
+        - BUILDMAN="zynq&armv7"
+    - name: "buildman ZynqMP and Versal"
+      env:
+        - BUILDMAN="versal|zynqmp&aarch64"
     - name: "buildman xtensa"
       env:
         - BUILDMAN="xtensa"

Looks good.

Thanks,
Michal

author
#11 lore raw

PATCH v3 3/3 travis: Split and rename xilinx ARM in to two jobs

In reply to Tom Rini
Quoted 7 lines · Tom Rini

Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191017/7380531a/attachment.sig>