dt-bindings: samsung: Indent examples with four spaces
Subsystems (5)
Krzysztof Kozlowski
maintainerPATCH 1/4 dt-bindings: samsung: Indent examples with four spaces
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files.
--- .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- .../bindings/power/reset/syscon-reboot.yaml | 8 +-- .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- 5 files changed, 48 insertions(+), 48 deletions(-)
Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2 -2
@@ -20,6 +20,6 @@ properties: examples: - | chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; };
Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +32 -32
72 lines not on this page · raw message
Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +4 -4
@@ -53,8 +53,8 @@ allOf: examples: - | poweroff { - compatible = "syscon-poweroff"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x7a>; + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; };
Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +4 -4
@@ -53,8 +53,8 @@ allOf: examples: - | reboot { - compatible = "syscon-reboot"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x1>; + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; };
Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +6 -6
@@ -76,10 +76,10 @@ allOf: examples: - | rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP - clock-names = "rtc", "rtc_src"; + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 4>, <0 45 4>; + clocks = <&clock 0>, // CLK_RTC + <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clock-names = "rtc", "rtc_src"; };
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 2/4 dt-bindings: rtc: s3c: Use defines instead of clock numbers
Make the examples in S3C RTC bindings more readable and bring them closer to real DTS by using defines for clocks.
--- Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +5 -2
@@ -75,11 +75,14 @@ allOf: examples: - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/clock/samsung,s2mps11.h> + rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clocks = <&clock CLK_RTC>, + <&s2mps11_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; };
Signature · 1 line
2.17.1
Re: [PATCH 2/4] dt-bindings: rtc: s3c: Use defines instead of clock numbers
Quoted 4 lines · Krzysztof Kozlowski
Make the examples in S3C RTC bindings more readable and bring them closer to real DTS by using defines for clocks.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 28 lines
--- Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +5
-2@@ -75,11 +75,14 @@ allOf: examples: - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/clock/samsung,s2mps11.h> + rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clocks = <&clock CLK_RTC>, + <&s2mps11_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; };Signature · 1 line
2.17.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Re: [PATCH 2/4] dt-bindings: rtc: s3c: Use defines instead of clock numbers
In reply to Krzysztof KozlowskiQuoted 8 lines · Krzysztof Kozlowski
Make the examples in S3C RTC bindings more readable and bring them closer to real DTS by using defines for clocks.
Signed-off-by Krzysztof Kozlowski <[email protected]>--- Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
Applied, thanks.
Rob
Krzysztof Kozlowski
maintainerPATCH 3/4 dt-bindings: rtc: s3c: Include generic dt-schema bindings
In reply to Krzysztof KozlowskiInclude the generic rtc.yaml bindings in Samsung S3C RTC bindings. This brings the requirement of proper node names and adds parsing of additional properties.
--- Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +1 -0
@@ -48,6 +48,7 @@ properties: maxItems: 2 allOf: + - $ref: rtc.yaml# - if: properties: compatible:
Signature · 1 line
2.17.1
Re: [PATCH 3/4] dt-bindings: rtc: s3c: Include generic dt-schema bindings
Quoted 5 lines · Krzysztof Kozlowski
Include the generic
rtc.yamlbindings in Samsung S3C RTC bindings. This brings the requirement of proper node names and adds parsing of additional properties.Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 19 lines
--- Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +1
-0@@ -48,6 +48,7 @@ properties: maxItems: 2 allOf: + - $ref: rtc.yaml# - if: properties: compatible:Signature · 1 line
2.17.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Re: [PATCH 3/4] dt-bindings: rtc: s3c: Include generic dt-schema bindings
In reply to Krzysztof KozlowskiQuoted 9 lines · Krzysztof Kozlowski
Include the generic
rtc.yamlbindings in Samsung S3C RTC bindings. This brings the requirement of proper node names and adds parsing of additional properties.Signed-off-by Krzysztof Kozlowski <[email protected]>--- Documentation/devicetree/bindings/rtc/s3c-rtc.yaml | 1 + 1 file changed, 1 insertion(+)
Applied, thanks.
Rob
Krzysztof Kozlowski
maintainerPATCH 4/4 dt-bindings: iio: adc: exynos: Use defines instead of clock numbers
In reply to Krzysztof KozlowskiMake the examples in Exynos ADC bindings more readable and bring them closer to real DTS by using defines for clocks.
--- .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +4 -2
@@ -135,6 +135,8 @@ examples: }; - | + #include <dt-bindings/clock/exynos3250.h> + adc@126c0000 { compatible = "samsung,exynos3250-adc"; reg = <0x126C0000 0x100>;
@@ -142,8 +144,8 @@ examples: #io-channel-cells = <1>; io-channel-ranges; - clocks = <&cmu 0>, // CLK_TSADC - <&cmu 1>; // CLK_SCLK_TSADC + clocks = <&cmu CLK_TSADC>, + <&cmu CLK_SCLK_TSADC>; clock-names = "adc", "sclk"; vdd-supply = <&buck5_reg>;
Signature · 1 line
2.17.1
Re: [PATCH 4/4] dt-bindings: iio: adc: exynos: Use defines instead of clock numbers
Quoted 4 lines · On Wed, 2 Oct 2019 18:07:44 +0200 Krzysztof Kozlowski <[email protected]> wrote:
Make the examples in Exynos ADC bindings more readable and bring them closer to real DTS by using defines for clocks.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 28 lines
--- .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +4
-2@@ -135,6 +135,8 @@ examples: }; - | + #include <dt-bindings/clock/exynos3250.h> + adc@126c0000 { compatible = "samsung,exynos3250-adc"; reg = <0x126C0000 0x100>;@@ -142,8 +144,8 @@ examples: #io-channel-cells = <1>; io-channel-ranges; - clocks = <&cmu 0>, // CLK_TSADC - <&cmu 1>; // CLK_SCLK_TSADC + clocks = <&cmu CLK_TSADC>, + <&cmu CLK_SCLK_TSADC>; clock-names = "adc", "sclk"; vdd-supply = <&buck5_reg>;
Re: [PATCH 4/4] dt-bindings: iio: adc: exynos: Use defines instead of clock numbers
In reply to Krzysztof KozlowskiQuoted 8 lines · Krzysztof Kozlowski
Make the examples in Exynos ADC bindings more readable and bring them closer to real DTS by using defines for clocks.
Signed-off-by Krzysztof Kozlowski <[email protected]>--- .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
Applied, thanks.
Rob
Quoted 4 lines · On Wed, 2 Oct 2019 18:07:41 +0200 Krzysztof Kozlowski <[email protected]> wrote:
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files.
I'm assuming Rob will pick these up given they span multiple subsystems.
Quoted 1 line
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 153 lines
--- .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- .../bindings/power/reset/syscon-reboot.yaml | 8 +-- .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- 5 files changed, 48 insertions(+), 48 deletions(-)Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2
-2@@ -20,6 +20,6 @@ properties: examples: - | chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; };Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +32
-32@@ -112,40 +112,40 @@ allOf: examples: - | adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12d10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; }; - | adc@126c0000 { - compatible = "samsung,exynos3250-adc"; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu 0>, // CLK_TSADC - <&cmu 1>; // CLK_SCLK_TSADC - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu 0>, // CLK_TSADC + <&cmu 1>; // CLK_SCLK_TSADC + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; };Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +4
-4@@ -53,8 +53,8 @@ allOf: examples: - | poweroff { - compatible = "syscon-poweroff"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x7a>; + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; };Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +4
-4@@ -53,8 +53,8 @@ allOf: examples: - | reboot { - compatible = "syscon-reboot"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x1>; + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; };Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +6
-6@@ -76,10 +76,10 @@ allOf: examples: - | rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP - clock-names = "rtc", "rtc_src"; + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 4>, <0 45 4>; + clocks = <&clock 0>, // CLK_RTC + <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clock-names = "rtc", "rtc_src"; };
Quoted 5 lines · Krzysztof Kozlowski
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 156 lines
--- .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- .../bindings/power/reset/syscon-reboot.yaml | 8 +-- .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- 5 files changed, 48 insertions(+), 48 deletions(-)Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2
-2@@ -20,6 +20,6 @@ properties: examples: - | chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; };Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +32
-32@@ -112,40 +112,40 @@ allOf: examples: - | adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12d10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; }; - | adc@126c0000 { - compatible = "samsung,exynos3250-adc"; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu 0>, // CLK_TSADC - <&cmu 1>; // CLK_SCLK_TSADC - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu 0>, // CLK_TSADC + <&cmu 1>; // CLK_SCLK_TSADC + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; };Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +4
-4@@ -53,8 +53,8 @@ allOf: examples: - | poweroff { - compatible = "syscon-poweroff"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x7a>; + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; };Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +4
-4@@ -53,8 +53,8 @@ allOf: examples: - | reboot { - compatible = "syscon-reboot"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x1>; + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; };Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +6
-6@@ -76,10 +76,10 @@ allOf: examples: - | rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP - clock-names = "rtc", "rtc_src"; + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 4>, <0 45 4>; + clocks = <&clock 0>, // CLK_RTC + <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clock-names = "rtc", "rtc_src"; };Signature · 1 line
2.17.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi,
Quoted 5 lines · Krzysztof Kozlowski
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files.
Signed-off-by Krzysztof Kozlowski <[email protected]>
-- Sebastian
Quoted 156 lines
--- .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- .../bindings/power/reset/syscon-reboot.yaml | 8 +-- .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- 5 files changed, 48 insertions(+), 48 deletions(-)Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +2
-2@@ -20,6 +20,6 @@ properties: examples: - | chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; };Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +32
-32@@ -112,40 +112,40 @@ allOf: examples: - | adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12d10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; }; - | adc@126c0000 { - compatible = "samsung,exynos3250-adc"; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu 0>, // CLK_TSADC - <&cmu 1>; // CLK_SCLK_TSADC - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu 0>, // CLK_TSADC + <&cmu 1>; // CLK_SCLK_TSADC + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; };Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +4
-4@@ -53,8 +53,8 @@ allOf: examples: - | poweroff { - compatible = "syscon-poweroff"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x7a>; + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; };Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +4
-4@@ -53,8 +53,8 @@ allOf: examples: - | reboot { - compatible = "syscon-reboot"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x1>; + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; };Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +6
-6@@ -76,10 +76,10 @@ allOf: examples: - | rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP - clock-names = "rtc", "rtc_src"; + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 4>, <0 45 4>; + clocks = <&clock 0>, // CLK_RTC + <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clock-names = "rtc", "rtc_src"; };Signature · 1 line
2.17.1
Quoted 4 lines · Krzysztof Kozlowski
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files.
Quoted 9 lines
Signed-off-by Krzysztof Kozlowski <[email protected]>--- .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- .../bindings/power/reset/syscon-reboot.yaml | 8 +-- .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- 5 files changed, 48 insertions(+), 48 deletions(-)
Applied, thanks.
Rob