Skip to contentSkip to conversation

dt-bindings: net: add qcom,ath11k.yaml

PATCH In review Anilkumar Kolli 2 participants 2 messages Oct 16, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: net: add qcom,ath11k.yaml

Converting ath11k device tree documentation to yaml format.

---
 .../bindings/net/wireless/qcom,ath11k.txt          | 127 ----------
 .../bindings/net/wireless/qcom,ath11k.yaml         | 277 +++++++++++++++++++++
 2 files changed, 277 insertions(+), 127 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
 create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt deleted +0 -127
deleted file mode 100644
index 1824238b4b50..000000000000
@@ -1,127 +0,0 @@
-* Qualcomm Technologies ath11k wireless devices
-
-Required properties:
-- compatible: Should be "qcom,ipq8074-wifi"
-
-AHB based ipq8074 uses most of the properties defined in this doc.
-
-Optional properties:
-- reg: Address and length of the register set for the device.
-- interrupts: List of interrupt lines. Must contain an entry
-	      for each entry in the interrupt-names property.
-- interrupt-names: Must include the entries for CE interrupt
-		   names ("ce0" to "ce11") and hw srng interrupt
-		   names.
-- qcom,rproc: DT entry of q6v5-wcss
-
-Example:
-
-wifi0: wifi@c000000 {
-	compatible = "qcom,ipq8074-wifi";
-	reg = <0xc000000 0x2000000>;
-	interrupts = <0 320 1>,
-		     <0 319 1>,
-		     <0 318 1>,
-		     <0 317 1>,
-		     <0 316 1>,
-		     <0 315 1>,
-		     <0 314 1>,
-		     <0 311 1>,
-		     <0 310 1>,
-		     <0 411 1>,
-		     <0 410 1>,
-		     <0 40 1>,
-		     <0 39 1>,
-		     <0 302 1>,
-		     <0 301 1>,
-		     <0 37 1>,
-		     <0 36 1>,
-		     <0 296 1>,
-		     <0 295 1>,
-		     <0 294 1>,
-		     <0 293 1>,
-		     <0 292 1>,
-		     <0 291 1>,
-		     <0 290 1>,
-		     <0 289 1>,
-		     <0 288 1>,
-		     <0 239 1>,
-		     <0 236 1>,
-		     <0 235 1>,
-		     <0 234 1>,
-		     <0 233 1>,
-		     <0 232 1>,
-		     <0 231 1>,
-		     <0 230 1>,
-		     <0 229 1>,
-		     <0 228 1>,
-		     <0 224 1>,
-		     <0 223 1>,
-		     <0 203 1>,
-		     <0 183 1>,
-		     <0 180 1>,
-		     <0 179 1>,
-		     <0 178 1>,
-		     <0 177 1>,
-		     <0 176 1>,
-		     <0 163 1>,
-		     <0 162 1>,
-		     <0 160 1>,
-		     <0 159 1>,
-		     <0 158 1>,
-		     <0 157 1>,
-		     <0 156 1>;
-	interrupt-names = "misc-pulse1",
-			  "misc-latch",
-			  "sw-exception",
-			  "watchdog",
-			  "ce0",
-			  "ce1",
-			  "ce2",
-			  "ce3",
-			  "ce4",
-			  "ce5",
-			  "ce6",
-			  "ce7",
-			  "ce8",
-			  "ce9",
-			  "ce10",
-			  "ce11",
-			  "host2wbm-desc-feed",
-			  "host2reo-re-injection",
-			  "host2reo-command",
-			  "host2rxdma-monitor-ring3",
-			  "host2rxdma-monitor-ring2",
-			  "host2rxdma-monitor-ring1",
-			  "reo2ost-exception",
-			  "wbm2host-rx-release",
-			  "reo2host-status",
-			  "reo2host-destination-ring4",
-			  "reo2host-destination-ring3",
-			  "reo2host-destination-ring2",
-			  "reo2host-destination-ring1",
-			  "rxdma2host-monitor-destination-mac3",
-			  "rxdma2host-monitor-destination-mac2",
-			  "rxdma2host-monitor-destination-mac1",
-			  "ppdu-end-interrupts-mac3",
-			  "ppdu-end-interrupts-mac2",
-			  "ppdu-end-interrupts-mac1",
-			  "rxdma2host-monitor-status-ring-mac3",
-			  "rxdma2host-monitor-status-ring-mac2",
-			  "rxdma2host-monitor-status-ring-mac1",
-			  "host2rxdma-host-buf-ring-mac3",
-			  "host2rxdma-host-buf-ring-mac2",
-			  "host2rxdma-host-buf-ring-mac1",
-			  "rxdma2host-destination-ring-mac3",
-			  "rxdma2host-destination-ring-mac2",
-			  "rxdma2host-destination-ring-mac1",
-			  "host2tcl-input-ring4",
-			  "host2tcl-input-ring3",
-			  "host2tcl-input-ring2",
-			  "host2tcl-input-ring1",
-			  "wbm2host-tx-completions-ring3",
-			  "wbm2host-tx-completions-ring2",
-			  "wbm2host-tx-completions-ring1",
-			  "tcl2host-status-ring";
-	qcom,rproc = <&qcom_q6v5_wcss>;
-};
Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml new file +277 -0

277 lines not on this page · raw message

Signature · 7 lines
1.9.1


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
#1 lore raw
Quoted 4 lines · Anilkumar Kolli

Converting ath11k device tree documentation to yaml format.

Patch applied to ath11k-bringup branch of ath.git, thanks.

ea1107a93b4a dt-bindings: net: add qcom,ath11k.yaml

Signature · 9 lines
https://patchwork.kernel.org/patch/11192401/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k