Skip to contentSkip to conversation

ASoC: dt-bindings: rt1011: add r0 and temperature device property

PATCH In review [email protected] 2 participants 4 messages Oct 16, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: dt-bindings: rt1011: add r0 and temperature device property

From: Shuming Fan <[email protected]>

Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area
where keeps data whether factory reset or OS update.

---
 Documentation/devicetree/bindings/sound/rt1011.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/sound/rt1011.txt +10 -0
index 35a23e60d679..02d53b9aa247 100644
@@ -20,6 +20,14 @@ Required properties:
         |     1     |    1     |   0x3b     |
         -------------------------------------
 
+Optional properties:
+
+- realtek,temperature_calib
+  u32. The temperature was measured while doing the calibration. Units: Celsius degree
+
+- realtek,r0_calib
+  u32. This is r0 calibration data which was measured in factory mode.
+
 Pins on the device (for linking into audio routes) for RT1011:
 
   * SPO
@@ -29,4 +37,6 @@ Example:
 rt1011: codec@38 {
 	compatible = "realtek,rt1011";
 	reg = <0x38>;
+	realtek,temperature_calib = <25>;
+	realtek,r0_calib = <0x224050>;
 };
Signature · 6 lines
2.23.0

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
maintainer
#1 lore raw
Quoted 5 lines · On Wed, Oct 16, 2019 at 07:56:17PM +0800, [email protected] wrote:

From: Shuming Fan <[email protected]>

Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area
where keeps data whether factory reset or OS update.

Please submit patches using subject lines reflecting the style for the subsystem, this makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing. There's no need to resubmit to fix this alone.

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

maintainer
#2 lore raw
Quoted 11 lines · Mark Brown
Quoted 3 lines · On Wed, Oct 16, 2019 at 07:56:17PM +0800, [email protected] wrote:

Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area
where keeps data whether factory reset or OS update.

Please submit patches using subject lines reflecting the style for the subsystem, this makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing. There's no need to resubmit to fix this alone.

Sorry, fat fingered things and replied to the wrong e-mail here - no issues at all with the subject line on this one.

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

maintainer
#3 lore raw

[alsa-devel] Applied "ASoC: dt-bindings: rt1011: add r0 and temperature device property" to the asoc tree

In reply to [email protected]

The patch

ASoC: dt-bindings: rt1011: add r0 and temperature device property

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From cf775f68a0939f0e5aad5855f63338c4b5e51c59 Mon Sep 17 00:00:00 2001
From: Shuming Fan <[email protected]>
Date: Wed, 16 Oct 2019 19:56:17 +0800
Subject: [PATCH] ASoC: dt-bindings: rt1011: add r0 and temperature device
property

Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area
where keeps data whether factory reset or OS update.

---
 Documentation/devicetree/bindings/sound/rt1011.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)
Documentation/devicetree/bindings/sound/rt1011.txt +10 -0
index 35a23e60d679..02d53b9aa247 100644
@@ -20,6 +20,14 @@ Required properties:
         |     1     |    1     |   0x3b     |
         -------------------------------------
 
+Optional properties:
+
+- realtek,temperature_calib
+  u32. The temperature was measured while doing the calibration. Units: Celsius degree
+
+- realtek,r0_calib
+  u32. This is r0 calibration data which was measured in factory mode.
+
 Pins on the device (for linking into audio routes) for RT1011:
 
   * SPO
@@ -29,4 +37,6 @@ Example:
 rt1011: codec@38 {
 	compatible = "realtek,rt1011";
 	reg = <0x38>;
+	realtek,temperature_calib = <25>;
+	realtek,r0_calib = <0x224050>;
 };
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel