Skip to contentSkip to conversation

ARM: dts: imx6-logicpd: Re-enable SNVS power key

PATCH Applied Adam Ford 2 participants 2 messages Oct 16, 2019 – Oct 28, 2019

Subsystems (3)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 ARM: dts: imx6-logicpd: Re-enable SNVS power key

The baseboard of the Logic PD i.MX6 development kit has a power button routed which can both power down and power up the board. It can also wake the board from sleep. This functionality was marked as disabled by default in imx6qdl.dtsi, so it needs to be explicitly enabled for each board.

This patch enables the snvs power key again.

Fixes 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design")
Cc stable <[email protected]> #5.3+
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +4 -0
index 2a6ce87071f9..9e027b9a5f91 100644
@@ -328,6 +328,10 @@
 	pinctrl-0 = <&pinctrl_pwm3>;
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
Signature · 1 line
2.17.1
Applied
#1 lore raw
Quoted 8 lines · Adam Ford

The baseboard of the Logic PD i.MX6 development kit has a power button routed which can both power down and power up the board. It can also wake the board from sleep. This functionality was marked as disabled by default in imx6qdl.dtsi, so it needs to be explicitly enabled for each board.

This patch enables the snvs power key again.

Fixes 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design")

So this is fixing powerkey, while the previous fix on som was actually about poweroff. I was confused.

Quoted 3 lines
Cc stable <[email protected]> #5.3+

Applied, thanks.