Skip to contentSkip to conversation

Add initial support for FriendlyARM Nanopi NEO Plus2 board with below features: - U-Boot 2019.01 - Linux 5.0 - Default packages from buildroot

PATCH New aussedatlo 1 participant 1 message Oct 17, 2019

lore
Share & tools
lore

aussedatlo

author
#0 lore raw

PATCH 1/1 Add initial support for FriendlyARM Nanopi NEO Plus2 board with below features: - U-Boot 2019.01 - Linux 5.0 - Default packages from buildroot

From: Aussedat Louis <[email protected]>

---
 .gitlab-ci.yml                                |  1 +
 DEVELOPERS                                    |  4 ++
 board/friendlyarm/nanopi-neo-plus2/boot.cmd   |  6 ++
 .../friendlyarm/nanopi-neo-plus2/genimage.cfg | 39 ++++++++++++
 .../nanopi-neo-plus2/linux-extras.config      | 10 +++
 board/friendlyarm/nanopi-neo-plus2/readme.txt | 37 +++++++++++
 ...3430-sdio.friendlyarm,nanopi-neo-plus2.txt | 53 ++++++++++++++++
 .../friendlyarm_nanopi_neo_plus2_defconfig    | 63 +++++++++++++++++++
 8 files changed, 213 insertions(+)
 create mode 100644 board/friendlyarm/nanopi-neo-plus2/boot.cmd
 create mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
 create mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
 create mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
 create mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
 create mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
.gitlab-ci.yml +1 -0
index 59efd51340..3f584dfb0b 100644
@@ -185,6 +185,7 @@ freescale_t1040d4rdb_defconfig: { extends: .defconfig }
 freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_a64_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig }
+friendlyarm_nanopi_neo_plus2_defconfig: { extends: .defconfig }
 galileo_defconfig: { extends: .defconfig }
 grinn_chiliboard_defconfig: { extends: .defconfig }
 grinn_liteboard_defconfig: { extends: .defconfig }
DEVELOPERS +4 -0
index 9a24ca30ca..941462a077 100644
@@ -2512,3 +2512,7 @@ F:	package/qjson/
 F:	package/quazip/
 F:	package/shapelib/
 F:	package/tinc/
+
+N:  Aussedat Louis <[email protected]>
+F:	board/friendlyarm/nanopi-neo-plus2/
+F:	configs/friendlyarm_nanopi_neo_plus2_defconfig
board/friendlyarm/nanopi-neo-plus2/boot.cmd new file +6 -0
new file mode 100644
index 0000000000..227604a23d
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo-plus2.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-neo-plus2/genimage.cfg new file +39 -0
new file mode 100644
index 0000000000..a4c2a7a894
@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h5-nanopi-neo-plus2.dtb",
+			"boot.scr"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition spl {
+		in-partition-table = "no"
+		image = "sunxi-spl.bin"
+		offset = 8192
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 40K
+		size = 1M # 1MB - 40K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/friendlyarm/nanopi-neo-plus2/linux-extras.config new file +10 -0
new file mode 100644
index 0000000000..f73f582331
@@ -0,0 +1,10 @@
+# wireless core
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_CFG80211_WEXT=y
+
+# wireless drivers
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_BROADCOM=y
+CONFIG_BRCMFMAC=m
\ No newline at end of file
board/friendlyarm/nanopi-neo-plus2/readme.txt new file +37 -0
new file mode 100644
index 0000000000..ae59952029
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Nanopi NEO Plus2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Nanopi NEO2 link:
+http://nanopi.io/nanopi-neo-plus2.html
+
+Wiki link:
+http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+    $ make friendlyarm_nanopi_neo_plus2_defconfig
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
+is on the serial line, 115200 8N1.
board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt new file +53 -0

53 lines not on this page · raw message

configs/friendlyarm_nanopi_neo_plus2_defconfig new file +63 -0

63 lines not on this page · raw message

Signature · 1 line
2.20.1