Skip to contentSkip to conversation

PCI/PM: Use dev_printk() when possible

PATCH In review Bjorn Helgaas 2 participants 4 messages Oct 17, 2019 – Oct 18, 2019 PCI

lore
Share & tools
lore
#0 lore raw

cover PCI/PM: Use dev_printk() when possible

From: Bjorn Helgaas <[email protected]>

Some PM messages, e.g., "PCI PM: Device state not saved by %pS\n", had no indication of what device was affected. Add pci_WARN() and use it.

Bjorn Helgaas (2):
PCI/PM: Use PCI dev_printk() wrappers for consistency PCI/PM: Use pci_WARN() to include device information

 drivers/pci/pci-driver.c | 45 ++++++++++++++++++++--------------------
 include/linux/pci.h      |  8 +++++++
 2 files changed, 31 insertions(+), 22 deletions(-)
Signature · 1 line
2.23.0.866.gb869b98d4c-goog
#1 lore raw

PATCH 1/2 PCI/PM: Use PCI dev_printk() wrappers for consistency

From: Bjorn Helgaas <[email protected]>

Use the PCI dev_printk() wrappers for consistency with the rest of the PCI core. No functional change intended.

---
 drivers/pci/pci-driver.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/pci/pci-driver.c +6 -5
index dd70ab2519c9..407b1df5ea7c 100644
@@ -315,7 +315,8 @@ static long local_pci_probe(void *_ddi)
 	 * Probe function should return < 0 for failure, 0 for success
 	 * Treat values > 0 as success, but warn.
 	 */
-	dev_warn(dev, "Driver probe function unexpectedly returned %d\n", rc);
+	pci_warn(pci_dev, "Driver probe function unexpectedly returned %d\n",
+		 rc);
 	return 0;
 }
 
@@ -865,7 +866,7 @@ static int pci_pm_suspend_noirq(struct device *dev)
 			pci_prepare_to_sleep(pci_dev);
 	}
 
-	dev_dbg(dev, "PCI PM: Suspend power state: %s\n",
+	pci_dbg(pci_dev, "PCI PM: Suspend power state: %s\n",
 		pci_power_name(pci_dev->current_state));
 
 	if (pci_dev->current_state == PCI_D0) {
@@ -880,7 +881,7 @@ static int pci_pm_suspend_noirq(struct device *dev)
 	}
 
 	if (pci_dev->skip_bus_pm && pm_suspend_no_platform()) {
-		dev_dbg(dev, "PCI PM: Skipped\n");
+		pci_dbg(pci_dev, "PCI PM: Skipped\n");
 		goto Fixup;
 	}
 
@@ -1295,11 +1296,11 @@ static int pci_pm_runtime_suspend(struct device *dev)
 		 * log level.
 		 */
 		if (error == -EBUSY || error == -EAGAIN) {
-			dev_dbg(dev, "can't suspend now (%ps returned %d)\n",
+			pci_dbg(pci_dev, "can't suspend now (%ps returned %d)\n",
 				pm->runtime_suspend, error);
 			return error;
 		} else if (error) {
-			dev_err(dev, "can't suspend (%ps returned %d)\n",
+			pci_err(pci_dev, "can't suspend (%ps returned %d)\n",
 				pm->runtime_suspend, error);
 			return error;
 		}
Signature · 1 line
2.23.0.866.gb869b98d4c-goog
#2 lore raw

PATCH 2/2 PCI/PM: Use pci_WARN() to include device information

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add and use pci_WARN() wrappers so warnings include device information.

---
 drivers/pci/pci-driver.c | 34 +++++++++++++++++-----------------
 include/linux/pci.h      |  8 ++++++++
 2 files changed, 25 insertions(+), 17 deletions(-)
drivers/pci/pci-driver.c +17 -17
index 407b1df5ea7c..5337cbbd69de 100644
@@ -585,9 +585,9 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
 
 		if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
 		    && pci_dev->current_state != PCI_UNKNOWN) {
-			WARN_ONCE(pci_dev->current_state != prev,
-				"PCI PM: Device state not saved by %pS\n",
-				drv->suspend);
+			pci_WARN_ONCE(pci_dev, pci_dev->current_state != prev,
+				      "PCI PM: Device state not saved by %pS\n",
+				      drv->suspend);
 		}
 	}
 
@@ -612,9 +612,9 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
 
 		if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
 		    && pci_dev->current_state != PCI_UNKNOWN) {
-			WARN_ONCE(pci_dev->current_state != prev,
-				"PCI PM: Device state not saved by %pS\n",
-				drv->suspend_late);
+			pci_WARN_ONCE(pci_dev, pci_dev->current_state != prev,
+				      "PCI PM: Device state not saved by %pS\n",
+				      drv->suspend_late);
 			goto Fixup;
 		}
 	}
@@ -670,8 +670,8 @@ static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev)
 	 * supported as well.  Drivers are supposed to support either the
 	 * former, or the latter, but not both at the same time.
 	 */
-	WARN(ret && drv->driver.pm, "driver %s device %04x:%04x\n",
-		drv->name, pci_dev->vendor, pci_dev->device);
+	pci_WARN(pci_dev, ret && drv->driver.pm, "device %04x:%04x\n",
+		 pci_dev->vendor, pci_dev->device);
 
 	return ret;
 }
@@ -794,9 +794,9 @@ static int pci_pm_suspend(struct device *dev)
 
 		if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
 		    && pci_dev->current_state != PCI_UNKNOWN) {
-			WARN_ONCE(pci_dev->current_state != prev,
-				"PCI PM: State of device not saved by %pS\n",
-				pm->suspend);
+			pci_WARN_ONCE(pci_dev, pci_dev->current_state != prev,
+				      "PCI PM: State of device not saved by %pS\n",
+				      pm->suspend);
 		}
 	}
 
@@ -842,9 +842,9 @@ static int pci_pm_suspend_noirq(struct device *dev)
 
 		if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
 		    && pci_dev->current_state != PCI_UNKNOWN) {
-			WARN_ONCE(pci_dev->current_state != prev,
-				"PCI PM: State of device not saved by %pS\n",
-				pm->suspend_noirq);
+			pci_WARN_ONCE(pci_dev, pci_dev->current_state != prev,
+				      "PCI PM: State of device not saved by %pS\n",
+				      pm->suspend_noirq);
 			goto Fixup;
 		}
 	}
@@ -1311,9 +1311,9 @@ static int pci_pm_runtime_suspend(struct device *dev)
 	if (pm && pm->runtime_suspend
 	    && !pci_dev->state_saved && pci_dev->current_state != PCI_D0
 	    && pci_dev->current_state != PCI_UNKNOWN) {
-		WARN_ONCE(pci_dev->current_state != prev,
-			"PCI PM: State of device not saved by %pS\n",
-			pm->runtime_suspend);
+		pci_WARN_ONCE(pci_dev, pci_dev->current_state != prev,
+			      "PCI PM: State of device not saved by %pS\n",
+			      pm->runtime_suspend);
 		return 0;
 	}
 
include/linux/pci.h +8 -0
index f9088c89a534..4846306d521c 100644
@@ -2400,4 +2400,12 @@ void pci_uevent_ers(struct pci_dev *pdev, enum  pci_ers_result err_type);
 #define pci_info_ratelimited(pdev, fmt, arg...) \
 	dev_info_ratelimited(&(pdev)->dev, fmt, ##arg)
 
+#define pci_WARN(pdev, condition, fmt, arg...) \
+	WARN(condition, "%s %s: " fmt, \
+	     dev_driver_string(&(pdev)->dev), pci_name(pdev), ##arg)
+
+#define pci_WARN_ONCE(pdev, condition, fmt, arg...) \
+	WARN_ONCE(condition, "%s %s: " fmt, \
+		  dev_driver_string(&(pdev)->dev), pci_name(pdev), ##arg)
+
 #endif /* LINUX_PCI_H */
Signature · 1 line
2.23.0.866.gb869b98d4c-goog
Reviewed-by on the v1 series
#3 lore raw
In reply to Bjorn Helgaas
Quoted 5 lines · CEST Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Some PM messages, e.g., "PCI PM: Device state not saved by %pS\n", had no indication of what device was affected. Add pci_WARN() and use it.

Quoted 9 lines

Bjorn Helgaas (2):
PCI/PM: Use PCI dev_printk() wrappers for consistency PCI/PM: Use pci_WARN() to include device information

 drivers/pci/pci-driver.c | 45 ++++++++++++++++++++--------------------
 include/linux/pci.h      |  8 +++++++
 2 files changed, 31 insertions(+), 22 deletions(-)

Good cleanups!

For both