spi: atmel: fix handling of cs_change set on non-last xfer
Subsystems (3)
PATCH 1/1 spi: atmel: fix handling of cs_change set on non-last xfer
From: Mans Rullgard <[email protected]>
The driver does the wrong thing when cs_change is set on a non-last xfer in a message. When cs_change is set, the driver deactivates the CS and leaves it off until a later xfer again has cs_change set whereas it should be briefly toggling CS off and on again.
This patch brings the behaviour of the driver back in line with the documentation and common sense. The delay of 10 us is the same as is used by the default spi_transfer_one_message() function in spi.c.
---
Hello,
This patch was first submitted 2 years[1] but was never applied while it has received the acked-by from Nicolas, and I don't see any review against it on the mailing list. So I resend it now.
Thanks,
Gregory
[1]: https://lkml.org/lkml/2016/1/17/31
drivers/spi/spi-atmel.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/spi/spi-atmel.c +3 -7
@@ -277,7 +277,6 @@ struct atmel_spi {bool use_pdc;bool keep_cs; -bool cs_active;u32 fifo_size;u8 native_cs_free;
@@ -1416,11 +1415,9 @@ static int atmel_spi_one_transfer(struct spi_master *master, &msg->transfers)) { as->keep_cs = true; }else { - as->cs_active = !as->cs_active; -if (as->cs_active) -cs_activate (as, msg->spi); -else -cs_deactivate (as, msg->spi); +cs_deactivate (as, msg->spi); +udelay (10 ); +cs_activate (as, msg->spi); } }
@@ -1443,7 +1440,6 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,atmel_spi_lock (as);cs_activate (as, spi); - as->cs_active = true; as->keep_cs = false; msg->status =0 ;
Signature · 1 line
2.23.0
Mark Brown
maintainerApplied "spi: atmel: fix handling of cs_change set on non-last xfer" to the spi tree
The patch
spi: atmel: fix handling of cs_change set on non-last xfer
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
fed8d8c7a6dc2a76d7764842853d81c770b0788eMon Sep 17 00:00:00 2001
From: Mans Rullgard <[email protected]>
Date: Fri, 18 Oct 2019 17:35:04 +0200
Subject: [PATCH] spi: atmel: fix handling of cs_change set on non-last xfer
The driver does the wrong thing when cs_change is set on a non-last xfer in a message. When cs_change is set, the driver deactivates the CS and leaves it off until a later xfer again has cs_change set whereas it should be briefly toggling CS off and on again.
This patch brings the behaviour of the driver back in line with the documentation and common sense. The delay of 10 us is the same as is used by the default spi_transfer_one_message() function in spi.c.
--- drivers/spi/spi-atmel.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/spi/spi-atmel.c +3 -7
@@ -302,7 +302,6 @@ struct atmel_spi {bool use_cs_gpios;bool keep_cs; -bool cs_active;u32 fifo_size; };
@@ -1376,11 +1375,9 @@ static int atmel_spi_one_transfer(struct spi_master *master, &msg->transfers)) { as->keep_cs = true; }else { - as->cs_active = !as->cs_active; -if (as->cs_active) -cs_activate (as, msg->spi); -else -cs_deactivate (as, msg->spi); +cs_deactivate (as, msg->spi); +udelay (10 ); +cs_activate (as, msg->spi); } }
@@ -1403,7 +1400,6 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,atmel_spi_lock (as);cs_activate (as, spi); - as->cs_active = true; as->keep_cs = false; msg->status =0 ;
Signature · 1 line
2.20.1