imx: imx8: fix loading container image from eMMC boot partitions
Subsystems (3)
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Booting with images in eMMC hardware boot partition doesn't work because the container header is loaded from user partition, thus the loaded data doesn't have a valid header. Add partition switching to support booting from eMMC boot partitions.
--- arch/arm/mach-imx/imx8/image.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
arch/arm/mach-imx/imx8/image.c +14 -1
@@ -72,7 +72,20 @@ static int get_container_size(void *dev, int dev_type, unsigned long offset)if (dev_type ==MMC_DEV ) {unsigned long count =0 ;struct mmc *mmc = (struct mmc *)dev; - +u8 part; + + part =EXT_CSD_EXTRACT_BOOT_PART (mmc->part_config); +if (part ==7 ) + part =0 ; +if (part ==1 || part ==2 ) { +if (CONFIG_IS_ENABLED (MMC_TINY )) + ret =mmc_switch_part (mmc, part); +else + ret =blk_dselect_hwpart (mmc_get_blk_desc (mmc), + part); +if (ret) +return ret; + } count = blk_dread(mmc_get_blk_desc(mmc), offset / mmc->read_bl_len, CONTAINER_HDR_ALIGNMENT / mmc->read_bl_len,
Signature · 1 line
2.7.4
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Hi Anatolij,
Quoted 9 lines
-----Original Message-----
From: Anatolij Gustschin <[email protected]>
Sent: 2019年10月21日 23:22
To: u-boot at lists.denx.de
Cc: sbabic at denx.de; festevam at gmail.com; dl-uboot-imx <[email protected]>; Ye Li <[email protected]>
Subject: [PATCH] imx: imx8: fix loading container image from eMMC boot partitions
Quoted 4 lines
Booting with images in eMMC hardware boot partition doesn't work because the container header is loaded from user partition, thus the loaded data doesn't have a valid header. Add partition switching to support booting from eMMC boot partitions.
get_boot_device_offset already switched partition, there is no need to add partition switch logic in get_container_size.
Regards,
Peng.
Quoted 35 lines
Signed-off-by Anatolij Gustschin <[email protected]>--- arch/arm/mach-imx/imx8/image.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)(quoted diff) +0
-0
b/arch/arm/mach-imx/imx8/image.cindex 58a29e8..b0e9494 100644arch/arm/mach-imx/imx8/image.c +14
-1@@ -72,7 +72,20 @@ static int get_container_size(void *dev, int dev_type, unsigned long offset)if (dev_type ==MMC_DEV ) {unsigned long count =0 ;struct mmc *mmc = (struct mmc *)dev; - +u8 part; + + part =EXT_CSD_EXTRACT_BOOT_PART (mmc->part_config); +if (part ==7 ) + part =0 ; +if (part ==1 || part ==2 ) { +if (CONFIG_IS_ENABLED (MMC_TINY )) + ret =mmc_switch_part (mmc, part); +else + ret =blk_dselect_hwpart (mmc_get_blk_desc (mmc), + part); +if (ret) +return ret; + } count = blk_dread(mmc_get_blk_desc(mmc), offset / mmc->read_bl_len,
CONTAINER_HDR_ALIGNMENT/mmc->read_bl_len,
--
2.7.4
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Hi Peng,
On Tue, 22 Oct 2019 02:43:31 +0000
Peng Fan peng.fan at nxp.com wrote:
...
Quoted 2 lines
get_boot_device_offsetalready switched partition, there is no need to add partition switch logic inget_container_size.
I'd be very happy if it did, but it didn't, at least not in current mainline tree. I can't find eMMC hw partition switching code in u-boot-imx tree either. I've checked in current master and in next branches:
https://github.com/sbabic/u-boot-imx/blob/master/arch/arm/mach-imx/imx8/image.c#L123
https://github.com/sbabic/u-boot-imx/blob/next/arch/arm/mach-imx/imx8/image.c#L123
I'll re-spin the patch to add it in spl_mmc_get_uboot_raw_sector(), this seems to be a better place for it.
--
Anatolij
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Hi Anatolij,
Quoted 8 lines
Subject: Re: [PATCH] imx: imx8: fix loading container image from eMMC boot partitions
Hi Peng,
On Tue, 22 Oct 2019 02:43:31 +0000
Peng Fan peng.fan at nxp.com wrote:
...
Quoted 6 lines
Quoted 2 lines
get_boot_device_offsetalready switched partition, there is no need to add partition switch logic inget_container_size.I'd be very happy if it did, but it didn't, at least not in current mainline tree. I can't find eMMC hw partition switching code in u-boot-imx tree either. I've checked in current master and in next branches:
My bad. I looked wrong. There is no such code.
But I do not understand well. When burn flash.bin into boot partition, SPL will be loaded from boot partition, SPL will load container images from boot partition, but in your case, I think SPL will load container images from user partition, so you switch back to boot partition.
From common/spl/spl_mmc.c, there is boot partition switch there, Why need to add such logic in imx8/image.c?
Thanks,
Peng.
Quoted 21 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.
com%2Fsbabic%2Fu-boot-imx%2Fblob%2Fmaster%2Farch%2Farm%2Fmach-i mx%2Fimx8%2Fimage.c%23L123&data=02%7C01%7Cpeng.fan%40nxp.c om%7Cf5d635a085054823ffe008d756c24582%7C686ea1d3bc2b4c6fa92cd9 9c5c301635%7C0%7C0%7C637073264694636512&sdata=Td3sdxz67eX EFuEMXzM2A3Dtm1OXRsR8m9cKKxo52UE%3D&reserved=0https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.
com%2Fsbabic%2Fu-boot-imx%2Fblob%2Fnext%2Farch%2Farm%2Fmach-im x%2Fimx8%2Fimage.c%23L123&data=02%7C01%7Cpeng.fan%40nxp.co m%7Cf5d635a085054823ffe008d756c24582%7C686ea1d3bc2b4c6fa92cd99c 5c301635%7C0%7C0%7C637073264694636512&sdata=TjcYIyo%2BO6J B4IHv5%2F5p89BOWh2EPnSu%2Fe%2BKEGg0brY%3D&reserved=0I'll re-spin the patch to add it in
spl_mmc_get_uboot_raw_sector(), this seems to be a better place for it.--
Anatolij
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Hi Peng,
On Tue, 22 Oct 2019 08:13:31 +0000
Peng Fan peng.fan at nxp.com wrote:
...
Quoted 2 lines
But I do not understand well. When burn flash.bin into boot partition, SPL will be loaded from boot partition,
yes, correct. On my test board flash.bin is in the first boot partition and SPL is loaded as expected.
Quoted 2 lines
SPL will load container images
from boot partition,
SPL switches to user partition during the inif of mmc driver:
spl_mmc_load() -> mmc_init()
Then it tries to load the container image in spl_mmc_get_uboot_raw_sector(), but here it reads the data from user partition and the header is not recognized as a valid header.
Quoted 2 lines
but in your case, I think SPL will load container images from user partition, so you switch back to boot partition.
yes, because the mmc init switches to user partition.
Quoted 2 lines
From
common/spl/spl_mmc.c, there is boot partition switch there, Why need to add such logic inimx8/image.c?
spl_mmc_load() reads the container header before partition switching.
--
Anatolij
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Quoted 27 lines
Subject: Re: [PATCH] imx: imx8: fix loading container image from eMMC boot partitions
Hi Peng,
On Tue, 22 Oct 2019 08:13:31 +0000
Peng Fan peng.fan at nxp.com wrote:
...Quoted 2 lines
But I do not understand well. When burn flash.bin into boot partition, SPL will be loaded from boot partition,
yes, correct. On my test board flash.bin is in the first boot partition and SPL is loaded as expected.
Quoted 2 lines
SPL will load container images
from boot partition,SPL switches to user partition during the inif of mmc driver:
spl_mmc_load()->mmc_init()Then it tries to load the container image in
spl_mmc_get_uboot_raw_sector(), but here it reads the data from user partition and the header is not recognized as a valid header.Quoted 2 lines
but in your case, I think SPL will load container images from user partition, so you switch back to boot partition.
Quoted 6 lines
yes, because the mmc init switches to user partition.
Quoted 2 lines
From
common/spl/spl_mmc.c, there is boot partition switch there, Why need to add such logic inimx8/image.c?
spl_mmc_load()reads the container header before partition switching.
Oh. Indeeded. Not took care of emmc when adding spl_mmc_get_uboot_raw_sector (:
Thanks.
Thanks,
Peng.
Quoted 3 lines
--
Anatolij
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
On Tue, 22 Oct 2019 10:08:42 +0000
Peng Fan peng.fan at nxp.com wrote:
...
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
From
common/spl/spl_mmc.c, there is boot partition switch there, Why need to add such logic inimx8/image.c?
spl_mmc_load()reads the container header before partition switching.Oh. Indeeded. Not took care of emmc when adding
spl_mmc_get_uboot_raw_sector(:
I think we should avoid adding partition switching in get_container_size(), it looks like container header is read several times which is suboptimal. I'll have to rethink this patch, don't have time for this now.
--
Anatolij
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
Quoted 9 lines
Subject: Re: [PATCH] imx: imx8: fix loading container image from eMMC boot partitions
On Tue, 22 Oct 2019 10:08:42 +0000
Peng Fan peng.fan at nxp.com wrote:
...Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
From
common/spl/spl_mmc.c, there is boot partition switch there, Why need to add such logic inimx8/image.c?
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
spl_mmc_load()reads the container header before partition switching.Oh. Indeeded. Not took care of emmc when adding
spl_mmc_get_uboot_raw_sector(:I think we should avoid adding partition switching in
get_container_size(), it looks like container header is read several times which is suboptimal. I'll have to rethink this patch, don't have time for this now.
ok. I'll give a look, if you not mind.
Thanks,
Peng.
Quoted 3 lines
--
Anatolij
PATCH 1/1 imx: imx8: fix loading container image from eMMC boot partitions
On Tue, 22 Oct 2019 10:18:01 +0000
Peng Fan peng.fan at nxp.com wrote:
...
Quoted 1 line
ok. I'll give a look, if you not mind.
Sure, no problem. Thanks!
--
Anatolij