rtc: disable uie before setting time and enable after
Alexandre Belloni
maintainerPATCH 1/1 rtc: disable uie before setting time and enable after
When setting the time in the future with the uie timer enabled, rtc_timer_do_work will loop for a while because the expiration of the uie timer was way before the current RTC time and a new timer will be enqueued until the current rtc time is reached.
If the uie timer is enabled, disable it before setting the time and enable it after expiring current timers (which may actually be an alarm).
This is the safest thing to do to ensure the uie timer is still synchronized with the RTC, especially in the UIE emulation case.
--- drivers/rtc/interface.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/rtc/interface.c +18 -1
@@ -125,7 +125,7 @@ EXPORT_SYMBOL_GPL(rtc_read_time);int rtc_set_time (struct rtc_device *rtc,struct rtc_time *tm) { -int err; +int err, uie; err =rtc_valid_tm (tm);if (err !=0 )
@@ -137,6 +137,17 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)rtc_subtract_offset (rtc, tm); +#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL + uie = rtc->uie_rtctimer.enabled || rtc->uie_irq_active; +#else + uie = rtc->uie_rtctimer.enabled; +#endif +if (uie) { + err =rtc_update_irq_enable (rtc,0 ); +if (err) +return err; + } + err =mutex_lock_interruptible (&rtc->ops_lock);if (err)return err;
@@ -153,6 +164,12 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)/* A timer might have just expired */ schedule_work (&rtc->irqwork); +if (uie) { + err =rtc_update_irq_enable (rtc,1 ); +if (err) +return err; + } +trace_rtc_set_time (rtc_tm_to_time64 (tm), err);return err; }
Signature · 1 line
2.21.0
Alexandre Belloni
maintainerPATCH 1/1 rtc: disallow update interrupts when time is invalid
Never enable update interrupts when the time set on the rtc is invalid. In that case, also avoid enabling the emulation because it will fail for the same reason.
--- drivers/rtc/interface.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/rtc/interface.c +14 -2
@@ -545,7 +545,7 @@ EXPORT_SYMBOL_GPL(rtc_alarm_irq_enable);int rtc_update_irq_enable (struct rtc_device *rtc,unsigned int enabled) { -int err; +int rc =0 , err; err =mutex_lock_interruptible (&rtc->ops_lock);if (err)
@@ -570,7 +570,9 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled)struct rtc_time tm;ktime_t now, onesec; -__rtc_read_time (rtc, &tm); + rc =__rtc_read_time (rtc, &tm); +if (rc) + goto out; onesec =ktime_set (1 ,0 ); now =rtc_tm_to_ktime (tm); rtc->uie_rtctimer.node.expires =ktime_add (now, onesec);
@@ -582,6 +584,16 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled) out:mutex_unlock (&rtc->ops_lock); + +/* +* __rtc_read_time() failed, this probably means that the RTC time has +* never been set or less probably there is a transient error on the +* bus. In any case, avoid enabling emulation has this will fail when +* reading the time too. +*/ +if (rc) +return rc; +#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL /* * Enable emulation if the driver returned -EINVAL to signal that it has
Signature · 1 line
2.21.0