Skip to contentSkip to conversation

mach-imx: Adding new argument for SIP call interface

PATCH Superseded Anatolij Gustschin 3 participants 11 messages Oct 21, 2019 – Oct 25, 2019

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 mach-imx: Adding new argument for SIP call interface

From: Ye Li <[email protected]>

Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument.

---
 arch/arm/include/asm/mach-imx/sys_proto.h | 3 ++-
 arch/arm/mach-imx/imx_bootaux.c           | 4 ++--
 arch/arm/mach-imx/sip.c                   | 4 +++-
 drivers/misc/imx8/fuse.c                  | 2 +-
 4 files changed, 8 insertions(+), 5 deletions(-)
arch/arm/include/asm/mach-imx/sys_proto.h +2 -1
index aa66fdc88f..139a7638c1 100644
@@ -143,7 +143,8 @@ int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
 int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
 
 unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
-			   unsigned long reg1, unsigned long reg2);
+			   unsigned long reg1, unsigned long reg2,
+			   unsigned long reg3);
 unsigned long call_imx_sip_ret2(unsigned long id, unsigned long reg0,
 				unsigned long *reg1, unsigned long reg2,
 				unsigned long reg3);
arch/arm/mach-imx/imx_bootaux.c +2 -2
index 18d7e6819c..3d9422d5a2 100644
@@ -26,7 +26,7 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
 
 	/* Enable M4 */
 #ifdef CONFIG_IMX8M
-	call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0);
+	call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0, 0);
 #else
 	clrsetbits_le32(SRC_BASE_ADDR + SRC_M4_REG_OFFSET,
 			SRC_M4C_NON_SCLR_RST_MASK, SRC_M4_ENABLE_MASK);
@@ -38,7 +38,7 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
 int arch_auxiliary_core_check_up(u32 core_id)
 {
 #ifdef CONFIG_IMX8M
-	return call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0);
+	return call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0, 0);
 #else
 	unsigned int val;
 
arch/arm/mach-imx/sip.c +3 -1
index 968e7cf309..fca520c671 100644
@@ -7,7 +7,8 @@
 #include <asm/arch/sys_proto.h>
 
 unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
-			   unsigned long reg1, unsigned long reg2)
+			   unsigned long reg1, unsigned long reg2,
+			   unsigned long reg3)
 {
 	struct pt_regs regs;
 
@@ -15,6 +16,7 @@ unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
 	regs.regs[1] = reg0;
 	regs.regs[2] = reg1;
 	regs.regs[3] = reg2;
+	regs.regs[4] = reg3;
 
 	smc_call(&regs);
 
drivers/misc/imx8/fuse.c +1 -1
index 2f2fad2c17..1309215d4d 100644
@@ -74,7 +74,7 @@ int fuse_prog(u32 bank, u32 word, u32 val)
 	}
 
 	return call_imx_sip(FSL_SIP_OTP_WRITE, (unsigned long)word,
-			    (unsigned long)val, 0);
+			    (unsigned long)val, 0, 0);
 }
 
 int fuse_override(u32 bank, u32 word, u32 val)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/3 mach-imx: Adding new argument for SIP call interface

On Mon, 21 Oct 2019 17:58:49 +0200
Anatolij Gustschin agust at denx.de wrote:
...

Quoted 2 lines

Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument.

with current git master this patch breaks building imx8m-power-domain.c. I'll fix it v2 patch.

--
Anatolij

#2 lore raw

PATCH 2/3 imx8: add sc_misc_seco_build_info()

In reply to Anatolij Gustschin

Add function for reading SECO-FW commit id.

---
 arch/arm/include/asm/arch-imx8/sci/sci.h |  1 +
 drivers/misc/imx8/scu_api.c              | 27 ++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
arch/arm/include/asm/arch-imx8/sci/sci.h +1 -0
index 14ee6f999b..df5c60d4ce 100644
@@ -81,6 +81,7 @@ int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl,
 void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev);
 void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status);
 void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit);
+void sc_misc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit);
 int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val);
 int sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp,
 		     s16 *celsius, s8 *tenths);
drivers/misc/imx8/scu_api.c +27 -0
index b2fdeef13a..44d0165c3f 100644
@@ -349,6 +349,33 @@ void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit)
 		*commit = RPC_U32(&msg, 4);
 }
 
+void sc_misc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit)
+{
+	struct udevice *dev = gd->arch.scu_dev;
+	int size = sizeof(struct sc_rpc_msg_s);
+	struct sc_rpc_msg_s msg;
+	int ret;
+
+	if (!dev)
+		hang();
+
+	RPC_VER(&msg) = SC_RPC_VERSION;
+	RPC_SVC(&msg) = SC_RPC_SVC_MISC;
+	RPC_FUNC(&msg) = MISC_FUNC_SECO_BUILD_INFO;
+	RPC_SIZE(&msg) = 1;
+
+	ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+	if (ret < 0) {
+		printf("%s: err: %d\n", __func__, ret);
+		return;
+	}
+
+	if (version)
+		*version = RPC_U32(&msg, 0);
+	if (commit)
+		*commit = RPC_U32(&msg, 4);
+}
+
 int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val)
 {
 	struct udevice *dev = gd->arch.scu_dev;
Signature · 1 line
2.17.1
#3 lore raw

PATCH 2/3 imx8: add sc_misc_seco_build_info()

Hi Anatolij

Quoted 1 line

Subject: [PATCH 2/3] imx8: add sc_misc_seco_build_info()

sc_seco_build_info already in Stefano's tree.

Thanks,
Peng.

Quoted 62 lines

Add function for reading SECO-FW commit id.

---
 arch/arm/include/asm/arch-imx8/sci/sci.h |  1 +
 drivers/misc/imx8/scu_api.c              | 27
++++++++++++++++++++++++
 2 files changed, 28 insertions(+)
arch/arm/include/asm/arch-imx8/sci/sci.h +0 -0
index 14ee6f999b..df5c60d4ce 100644
@@ -81,6 +81,7 @@ int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource,

sc_ctrl_t ctrl, void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev); void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status); void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit); +void sc_misc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit);
int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val); int
sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp,

arch/arm/include/asm/arch-imx8/sci/sci.h +0 -0
 		     s16 *celsius, s8 *tenths);
drivers/misc/imx8/scu_api.c index renamed from drivers/misc/imx8/scu_api.c +0 -0

b2fdeef13a..44d0165c3f 100644

drivers/misc/imx8/scu_api.c +26 -1
@@ -349,6 +349,33 @@ void sc_misc_build_info(sc_ipc_t ipc, u32 *build,
 u32 *commit)
 		*commit = RPC_U32(&msg, 4);
 }
 
+void sc_misc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit) {
+	struct udevice *dev = gd->arch.scu_dev;
+	int size = sizeof(struct sc_rpc_msg_s);
+	struct sc_rpc_msg_s msg;
+	int ret;
+
+	if (!dev)
+		hang();
+
+	RPC_VER(&msg) = SC_RPC_VERSION;
+	RPC_SVC(&msg) = SC_RPC_SVC_MISC;
+	RPC_FUNC(&msg) = MISC_FUNC_SECO_BUILD_INFO;
+	RPC_SIZE(&msg) = 1;
+
+	ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+	if (ret < 0) {
+		printf("%s: err: %d\n", __func__, ret);
+		return;
+	}
+
+	if (version)
+		*version = RPC_U32(&msg, 0);
+	if (commit)
+		*commit = RPC_U32(&msg, 4);
+}
+
 int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val)  {
 	struct udevice *dev = gd->arch.scu_dev;
--

2.17.1

#4 lore raw

PATCH 2/3 imx8: add sc_misc_seco_build_info()

Hi Peng,

On Tue, 22 Oct 2019 02:47:28 +0000
Peng Fan peng.fan at nxp.com wrote:
...

Quoted 1 line

sc_seco_build_info already in Stefano's tree.

Ah, I didn't notice it, must have been merged recently.

Thanks for pointing!

--
Anatolij

#5 lore raw

PATCH 2/3 imx8: add sc_misc_seco_build_info()

In reply to Peng Fan

Hi Peng,

On Tue, 22 Oct 2019 02:47:28 +0000
Peng Fan peng.fan at nxp.com wrote:
...

Quoted 3 lines
Quoted 1 line

Subject: [PATCH 2/3] imx8: add sc_misc_seco_build_info()

sc_seco_build_info already in Stefano's tree.

sc_seco_build_info() in current git master works on i.MX8QXP MEK board, but it doesn't work on my custom board with different blobs. Here U-Boot triggers system reset somewhere in sc_seco_build_info()->misc_call().

With sc_misc_seco_build_info() in this patch getting the IDs works, I've following IDs on this board:
SCFW 65afe5f6, SECO-FW 9d71fd5b, ATF d6451cc

The differences:
sc_seco_build_info() uses SC_RPC_SVC_SECO/SECO_FUNC_BUILD_INFO, sc_misc_seco_build_info() uses SC_RPC_SVC_MISC/MISC_FUNC_SECO_BUILD_INFO.

Any idea why sc_seco_build_info() ends in system reset?

Thanks,

--
Anatolij

#6 lore raw

PATCH 2/3 imx8: add sc_misc_seco_build_info()

Quoted 19 lines

Subject: Re: [PATCH 2/3] imx8: add sc_misc_seco_build_info()

Hi Peng,

On Tue, 22 Oct 2019 02:47:28 +0000
Peng Fan peng.fan at nxp.com wrote:
...

Quoted 3 lines
Quoted 1 line

Subject: [PATCH 2/3] imx8: add sc_misc_seco_build_info()

sc_seco_build_info already in Stefano's tree.

sc_seco_build_info() in current git master works on i.MX8QXP MEK board, but it doesn't work on my custom board with different blobs. Here U-Boot triggers system reset somewhere in sc_seco_build_info()->misc_call().

With sc_misc_seco_build_info() in this patch getting the IDs works, I've following IDs on this board:
SCFW 65afe5f6, SECO-FW 9d71fd5b, ATF d6451cc

Quoted 6 lines

The differences:
sc_seco_build_info() uses SC_RPC_SVC_SECO/SECO_FUNC_BUILD_INFO, sc_misc_seco_build_info() uses SC_RPC_SVC_MISC/MISC_FUNC_SECO_BUILD_INFO.

Any idea why sc_seco_build_info() ends in system reset?

You might need to update your seco/scfw.

Thanks,
Peng

Quoted 5 lines

Thanks,

--
Anatolij

#7 lore raw

PATCH 1/3 mach-imx: Adding new argument for SIP call interface

In reply to Anatolij Gustschin
Quoted 91 lines · Anatolij Gustschin

From: Ye Li <[email protected]>

Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument.

---
 arch/arm/include/asm/mach-imx/sys_proto.h | 3 ++-
 arch/arm/mach-imx/imx_bootaux.c           | 4 ++--
 arch/arm/mach-imx/sip.c                   | 4 +++-
 drivers/misc/imx8/fuse.c                  | 2 +-
 4 files changed, 8 insertions(+), 5 deletions(-)
arch/arm/include/asm/mach-imx/sys_proto.h +2 -1
index aa66fdc88f..139a7638c1 100644
@@ -143,7 +143,8 @@ int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
 int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
 
 unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
-			   unsigned long reg1, unsigned long reg2);
+			   unsigned long reg1, unsigned long reg2,
+			   unsigned long reg3);
 unsigned long call_imx_sip_ret2(unsigned long id, unsigned long reg0,
 				unsigned long *reg1, unsigned long reg2,
 				unsigned long reg3);
arch/arm/mach-imx/imx_bootaux.c +2 -2
index 18d7e6819c..3d9422d5a2 100644
@@ -26,7 +26,7 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
 
 	/* Enable M4 */
 #ifdef CONFIG_IMX8M
-	call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0);
+	call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0, 0);
 #else
 	clrsetbits_le32(SRC_BASE_ADDR + SRC_M4_REG_OFFSET,
 			SRC_M4C_NON_SCLR_RST_MASK, SRC_M4_ENABLE_MASK);
@@ -38,7 +38,7 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
 int arch_auxiliary_core_check_up(u32 core_id)
 {
 #ifdef CONFIG_IMX8M
-	return call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0);
+	return call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0, 0);
 #else
 	unsigned int val;
 
arch/arm/mach-imx/sip.c +3 -1
index 968e7cf309..fca520c671 100644
@@ -7,7 +7,8 @@
 #include <asm/arch/sys_proto.h>
 
 unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
-			   unsigned long reg1, unsigned long reg2)
+			   unsigned long reg1, unsigned long reg2,
+			   unsigned long reg3)
 {
 	struct pt_regs regs;
 
@@ -15,6 +16,7 @@ unsigned long call_imx_sip(unsigned long id, unsigned long reg0,
 	regs.regs[1] = reg0;
 	regs.regs[2] = reg1;
 	regs.regs[3] = reg2;
+	regs.regs[4] = reg3;
 
 	smc_call(&regs);
 
drivers/misc/imx8/fuse.c +1 -1
index 2f2fad2c17..1309215d4d 100644
@@ -74,7 +74,7 @@ int fuse_prog(u32 bank, u32 word, u32 val)
 	}
 
 	return call_imx_sip(FSL_SIP_OTP_WRITE, (unsigned long)word,
-			    (unsigned long)val, 0);
+			    (unsigned long)val, 0, 0);
 }
 
 int fuse_override(u32 bank, u32 word, u32 val)
Signature · 6 lines
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
#8 lore raw

PATCH 3/3 imx8: output SECO-FW, ATF and imx-mkimage commit IDs

In reply to Anatolij Gustschin

Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) and add the commit IDs to the environment.

---
 arch/arm/mach-imx/imx8/misc.c | 61 ++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)
arch/arm/mach-imx/imx8/misc.c +60 -1
index fe73e29eee..b0693358e7 100644
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0+
 #include <common.h>
 #include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
 {
@@ -25,9 +28,28 @@ int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
 	return 0;
 }
 
+#define FSL_SIP_BUILDINFO			0xC2000003
+#define FSL_SIP_BUILDINFO_GET_COMMITHASH	0x00
+extern uint32_t _end_ofs;
+
+static void set_buildinfo_to_env(uint32_t scfw, uint32_t secofw,
+				 char *mkimage, char *atf)
+{
+	if (!mkimage || !atf)
+		return;
+
+	env_set("commit_mkimage", mkimage);
+	env_set("commit_atf", atf);
+	env_set_hex("commit_scfw", (ulong)scfw);
+	env_set_hex("commit_secofw", (ulong)secofw);
+}
+
 void build_info(void)
 {
+	u32 seco_build = 0, seco_commit = 0;
 	u32 sc_build = 0, sc_commit = 0;
+	ulong atf_commit = 0;
+	char *mkimage_commit, *temp;
 
 	/* Get SCFW build and commit id */
 	sc_misc_build_info(-1, &sc_build, &sc_commit);
@@ -35,5 +57,42 @@ void build_info(void)
 		printf("SCFW does not support build info\n");
 		sc_commit = 0; /* Display 0 if build info not supported */
 	}
-	printf("Build: SCFW %x\n", sc_commit);
+
+	/* Get SECO FW build and commit id */
+	sc_misc_seco_build_info(-1, &seco_build, &seco_commit);
+	if (!seco_build) {
+		debug("SECO FW does not support build info\n");
+		/* Display 0 when the build info is not supported */
+		seco_commit = 0;
+	}
+
+	/*
+	 * Get imx-mkimage commit id.
+	 * The imx-mkimage puts the commit hash behind the end of u-boot.bin
+	 */
+	mkimage_commit = (char *)(ulong)(CONFIG_SYS_TEXT_BASE + _end_ofs +
+					 fdt_totalsize(gd->fdt_blob));
+	temp = mkimage_commit + 8;
+	*temp = '\0';
+
+	if (strlen(mkimage_commit) == 0) {
+		debug("IMX-MKIMAGE does not support build info\n");
+		mkimage_commit = "0"; /* Display 0 */
+	}
+
+	/* Get ARM Trusted Firmware commit id */
+	atf_commit = call_imx_sip(FSL_SIP_BUILDINFO,
+				  FSL_SIP_BUILDINFO_GET_COMMITHASH, 0, 0, 0);
+	if (atf_commit == 0xffffffff) {
+		debug("ATF does not support build info\n");
+		atf_commit = 0x30; /* Display 0 */
+	}
+
+	printf("Build: SCFW %08x, SECO-FW %08x\n"
+	       "       IMX-MKIMAGE %s, ATF %s\n",
+	       sc_commit, seco_commit, mkimage_commit, (char *)&atf_commit);
+
+	/* Set all to env */
+	set_buildinfo_to_env(sc_commit, seco_commit, mkimage_commit,
+			     (char *)&atf_commit);
 }
Signature · 1 line
2.17.1
#9 lore raw

PATCH 3/3 imx8: output SECO-FW, ATF and imx-mkimage commit IDs

Hi Anatolij,

Quoted 55 lines

Subject: [PATCH 3/3] imx8: output SECO-FW, ATF and imx-mkimage commit IDs

Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) and add the commit IDs to the environment.

---
 arch/arm/mach-imx/imx8/misc.c | 61
++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)
(quoted diff) +0 -0

b/arch/arm/mach-imx/imx8/misc.c index fe73e29eee..b0693358e7 100644

arch/arm/mach-imx/imx8/misc.c +3 -0
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0+
 #include <common.h>
 #include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
 { @@ -25,9 +28,28 @@ int sc_pm_setup_uart(sc_rsrc_t uart_rsrc,

sc_pm_clock_rate_t clk_rate)

arch/arm/mach-imx/imx8/misc.c +18 -0
 	return 0;
 }
 
+#define FSL_SIP_BUILDINFO			0xC2000003
+#define FSL_SIP_BUILDINFO_GET_COMMITHASH	0x00
+extern uint32_t _end_ofs;
+
+static void set_buildinfo_to_env(uint32_t scfw, uint32_t secofw,
+				 char *mkimage, char *atf)
+{
+	if (!mkimage || !atf)
+		return;
+
+	env_set("commit_mkimage", mkimage);
+	env_set("commit_atf", atf);
+	env_set_hex("commit_scfw", (ulong)scfw);
+	env_set_hex("commit_secofw", (ulong)secofw); }
+
 void build_info(void)
 {
+	u32 seco_build = 0, seco_commit = 0;
 	u32 sc_build = 0, sc_commit = 0;
+	ulong atf_commit = 0;
+	char *mkimage_commit, *temp;
 
 	/* Get SCFW build and commit id */
 	sc_misc_build_info(-1, &sc_build, &sc_commit); @@ -35,5 +57,42 @@

void build_info(void)

arch/arm/mach-imx/imx8/misc.c void build_info(void) · line 62

Quoted 7 lines
arch/arm/mach-imx/imx8/misc.c +3 -1
 		printf("SCFW does not support build info\n");
 		sc_commit = 0; /* Display 0 if build info not supported */
 	}
-	printf("Build: SCFW %x\n", sc_commit);
+
+	/* Get SECO FW build and commit id */
+	sc_misc_seco_build_info(-1, &seco_build, &seco_commit);

Use sc_seco_build_info.

Quoted 10 lines
arch/arm/mach-imx/imx8/misc.c +10 -0
+	if (!seco_build) {
+		debug("SECO FW does not support build info\n");
+		/* Display 0 when the build info is not supported */
+		seco_commit = 0;
+	}
+
+	/*
+	 * Get imx-mkimage commit id.
+	 * The imx-mkimage puts the commit hash behind the end of u-boot.bin
+	 */

arch/arm/mach-imx/imx8/misc.c void build_info(void) · line 89

Quoted 10 lines
arch/arm/mach-imx/imx8/misc.c +10 -0
+	mkimage_commit = (char *)(ulong)(CONFIG_SYS_TEXT_BASE + _end_ofs
+
+					 fdt_totalsize(gd->fdt_blob));
+	temp = mkimage_commit + 8;
+	*temp = '\0';
+
+	if (strlen(mkimage_commit) == 0) {
+		debug("IMX-MKIMAGE does not support build info\n");
+		mkimage_commit = "0"; /* Display 0 */
+	}

We no need imx-mkimage, use mkimage in U-Boot no need this piece code.

Regards,
Peng.

Quoted 20 lines
arch/arm/mach-imx/imx8/misc.c +12 -0
+
+	/* Get ARM Trusted Firmware commit id */
+	atf_commit = call_imx_sip(FSL_SIP_BUILDINFO,
+				  FSL_SIP_BUILDINFO_GET_COMMITHASH, 0, 0, 0);
+	if (atf_commit == 0xffffffff) {
+		debug("ATF does not support build info\n");
+		atf_commit = 0x30; /* Display 0 */
+	}
+
+	printf("Build: SCFW %08x, SECO-FW %08x\n"
+	       "       IMX-MKIMAGE %s, ATF %s\n",
+	       sc_commit, seco_commit, mkimage_commit, (char

*)&atf_commit);

arch/arm/mach-imx/imx8/misc.c +4 -1
+
+	/* Set all to env */
+	set_buildinfo_to_env(sc_commit, seco_commit, mkimage_commit,
+			     (char *)&atf_commit);
 }
--

2.17.1

#10 lore raw

PATCH 3/3 imx8: output SECO-FW, ATF and imx-mkimage commit IDs

Hi Peng,

On Tue, 22 Oct 2019 02:49:53 +0000
Peng Fan peng.fan at nxp.com wrote:
...

Quoted 4 lines

arch/arm/mach-imx/imx8/misc.c void build_info(void) · line 62

Quoted 2 lines
arch/arm/mach-imx/imx8/misc.c +2 -0
+	/* Get SECO FW build and commit id */
+	sc_misc_seco_build_info(-1, &seco_build, &seco_commit);  

Use sc_seco_build_info.

OK, will do in v2.

...

Quoted 6 lines

arch/arm/mach-imx/imx8/misc.c void build_info(void) · line 81

Quoted 4 lines
arch/arm/mach-imx/imx8/misc.c +4 -0
+	if (strlen(mkimage_commit) == 0) {
+		debug("IMX-MKIMAGE does not support build info\n");
+		mkimage_commit = "0"; /* Display 0 */
+	}

We no need imx-mkimage, use mkimage in U-Boot no need this piece code.

will drop it in v2 patch.

--
Anatolij