Skip to contentSkip to conversation

arm64: agilex: enable USB and LEDs on agilex devkit

PATCH New Dinh Nguyen 1 participant 1 message Oct 22, 2019 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: agilex: enable USB and LEDs on agilex devkit

Enable USB on the Agilex devkit. Also the Agilex devkit will use the same daughter card that is used on Stratix10, thus it map the same LEDs and GPIOs.

pushbutton PB_SW0 = gpio1.io4
pushbutton PB_SW1 = gpio1.io5

LED HPS_LED0      = gpio1.io20
LED HPS_LED1      = gpio1.io19
LED HPS_LED2      = gpio1.io21
---
 .../boot/dts/intel/socfpga_agilex_socdk.dts   | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +23 -0
index 866205ac7d51..e794a12ba7c5 100644
@@ -18,6 +18,24 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
@@ -70,6 +88,11 @@
 	status = "okay";
 };
 
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
 &watchdog0 {
 	status = "okay";
 };
Signature · 1 line
2.20.0