Skip to contentSkip to conversation

New macros for assembler symbols

PATCH Applied Jiri Slaby 8 participants 80 messages Oct 11, 2019 – Oct 25, 2019 Page 1 of 2

Subsystems (16)
Documentation x86 ACPI Crypto API +12 more subsystems
lore
Share & tools
lore

Jiri Slaby

author
#0 lore raw

v9 cover New macros for assembler symbols

So this is an updated version (v9) of the series based on comments provided mostly by Boris and rebased on the top of current tree (quite a few conflicting changes in assembly happened lately). See respective patches for changes done in them since the last submission. Now the summary:

This series introduces new macros for assembly as was discussed [1]. The rationale is that now we use several undocumented random macros collected over time. There are even some defined for different architectures differently. In many cases, developers do not know the difference in semantics between two basic macros END and ENDPROC. But in this very case, the difference is crucial especially for objtool when generating e.g. debuginfo for assembly. For this reason, we define a set of macros with documented meanings and hopefully intuitive names. These macros greatly support automatic tools working on the generated code from assembly or on the assembly proper.

The macros are introduced in the first patch of the series. The rest of patches start using these new macros in x86, converting *all* uses of the old macros to the new ones throughout the last patch. With every last user of some old macro, the macro is immediately made forbidden for x86.

When this settles down, conversion of other architectures can be done too.

For introduction, documentation, use and examples, please see Documentation/asm-annotations.rst from the first patch of the series.

[1] https://lkml.kernel.org/r/<[email protected]>

Jiri Slaby (28):
linkage: Introduce new macros for assembler symbols x86/asm/suspend: Use SYM_DATA for data
x86/asm: Annotate relocate_kernel_{32,64}.c x86/asm/entry: Annotate THUNKs
x86/asm: Annotate local pseudo-functions x86/asm/crypto: Annotate local functions
x86/boot: Annotate local functions
x86/uaccess: Annotate local function
x86/asm: Annotate aliases
x86/asm/entry: Annotate interrupt symbols properly x86/asm/head: Annotate data appropriately
x86/boot: Annotate data appropriately
um: Annotate data appropriately
xen/pvh: Annotate data appropriately
x86/asm/purgatory: Start using annotations
x86/asm: Do not annotate functions by GLOBAL
x86/asm: Use SYM_INNER_LABEL instead of GLOBAL x86/asm/realmode: Use SYM_DATA_* instead of GLOBAL x86/asm: Kill the last GLOBAL user and remove the macro x86/asm: Make some functions local
x86/asm/ftrace: Mark function_hook as function x86_64/asm: Add ENDs to some functions and relabel with SYM_CODE_* x86_64/asm: Change all ENTRY+END to SYM_CODE_* x86_64/asm: Change all ENTRY+ENDPROC to SYM_FUNC_* x86_32/asm: Add ENDs to some functions and relabel with SYM_CODE_* x86_32/asm: Change all ENTRY+END to SYM_CODE_* x86_32/asm: Change all ENTRY+ENDPROC to SYM_FUNC_* x86/asm: Replace WEAK uses by SYM_INNER_LABEL_ALIGN

 Documentation/asm-annotations.rst            | 216 ++++++++++++++++
 Documentation/index.rst                      |   8 +
 arch/x86/boot/compressed/efi_stub_32.S       |   4 +-
 arch/x86/boot/compressed/efi_thunk_64.S      |  33 +--
 arch/x86/boot/compressed/head_32.S           |  15 +-
 arch/x86/boot/compressed/head_64.S           |  63 ++---
 arch/x86/boot/compressed/mem_encrypt.S       |  11 +-
 arch/x86/boot/copy.S                         |  16 +-
 arch/x86/boot/pmjump.S                       |   8 +-
 arch/x86/crypto/aegis128-aesni-asm.S         |  36 +--
 arch/x86/crypto/aes_ctrby8_avx-x86_64.S      |  12 +-
 arch/x86/crypto/aesni-intel_asm.S            | 114 ++++-----
 arch/x86/crypto/aesni-intel_avx-x86_64.S     |  32 +--
 arch/x86/crypto/blowfish-x86_64-asm_64.S     |  16 +-
 arch/x86/crypto/camellia-aesni-avx-asm_64.S  |  44 ++--
 arch/x86/crypto/camellia-aesni-avx2-asm_64.S |  44 ++--
 arch/x86/crypto/camellia-x86_64-asm_64.S     |  16 +-
 arch/x86/crypto/cast5-avx-x86_64-asm_64.S    |  24 +-
 arch/x86/crypto/cast6-avx-x86_64-asm_64.S    |  32 +--
 arch/x86/crypto/chacha-avx2-x86_64.S         |  12 +-
 arch/x86/crypto/chacha-avx512vl-x86_64.S     |  12 +-
 arch/x86/crypto/chacha-ssse3-x86_64.S        |  16 +-
 arch/x86/crypto/crc32-pclmul_asm.S           |   4 +-
 arch/x86/crypto/crc32c-pcl-intel-asm_64.S    |   4 +-
 arch/x86/crypto/crct10dif-pcl-asm_64.S       |   4 +-
 arch/x86/crypto/des3_ede-asm_64.S            |   8 +-
 arch/x86/crypto/ghash-clmulni-intel_asm.S    |  12 +-
 arch/x86/crypto/nh-avx2-x86_64.S             |   4 +-
 arch/x86/crypto/nh-sse2-x86_64.S             |   4 +-
 arch/x86/crypto/poly1305-avx2-x86_64.S       |   4 +-
 arch/x86/crypto/poly1305-sse2-x86_64.S       |   8 +-
 arch/x86/crypto/serpent-avx-x86_64-asm_64.S  |  32 +--
 arch/x86/crypto/serpent-avx2-asm_64.S        |  32 +--
 arch/x86/crypto/serpent-sse2-i586-asm_32.S   |   8 +-
 arch/x86/crypto/serpent-sse2-x86_64-asm_64.S |   8 +-
 arch/x86/crypto/sha1_avx2_x86_64_asm.S       |   4 +-
 arch/x86/crypto/sha1_ni_asm.S                |   4 +-
 arch/x86/crypto/sha1_ssse3_asm.S             |   4 +-
 arch/x86/crypto/sha256-avx-asm.S             |   4 +-
 arch/x86/crypto/sha256-avx2-asm.S            |   4 +-
 arch/x86/crypto/sha256-ssse3-asm.S           |   4 +-
 arch/x86/crypto/sha256_ni_asm.S              |   4 +-
 arch/x86/crypto/sha512-avx-asm.S             |   4 +-
 arch/x86/crypto/sha512-avx2-asm.S            |   4 +-
 arch/x86/crypto/sha512-ssse3-asm.S           |   4 +-
 arch/x86/crypto/twofish-avx-x86_64-asm_64.S  |  32 +--
 arch/x86/crypto/twofish-i586-asm_32.S        |   8 +-
 arch/x86/crypto/twofish-x86_64-asm_64-3way.S |   8 +-
 arch/x86/crypto/twofish-x86_64-asm_64.S      |   8 +-
 arch/x86/entry/entry_32.S                    | 163 ++++++------
 arch/x86/entry/entry_64.S                    | 105 ++++----
 arch/x86/entry/entry_64_compat.S             |  16 +-
 arch/x86/entry/thunk_32.S                    |   4 +-
 arch/x86/entry/thunk_64.S                    |   7 +-
 arch/x86/entry/vdso/vdso32/system_call.S     |   2 +-
 arch/x86/include/asm/linkage.h               |   4 -
 arch/x86/kernel/acpi/wakeup_32.S             |   9 +-
 arch/x86/kernel/acpi/wakeup_64.S             |  10 +-
 arch/x86/kernel/ftrace_32.S                  |  19 +-
 arch/x86/kernel/ftrace_64.S                  |  42 ++--
 arch/x86/kernel/head_32.S                    |  60 ++---
 arch/x86/kernel/head_64.S                    | 108 ++++----
 arch/x86/kernel/irqflags.S                   |   8 +-
 arch/x86/kernel/relocate_kernel_32.S         |  13 +-
 arch/x86/kernel/relocate_kernel_64.S         |  13 +-
 arch/x86/kernel/verify_cpu.S                 |   4 +-
 arch/x86/kvm/vmx/vmenter.S                   |  12 +-
 arch/x86/lib/atomic64_386_32.S               |   4 +-
 arch/x86/lib/atomic64_cx8_32.S               |  32 +--
 arch/x86/lib/checksum_32.S                   |  16 +-
 arch/x86/lib/clear_page_64.S                 |  12 +-
 arch/x86/lib/cmpxchg16b_emu.S                |   4 +-
 arch/x86/lib/cmpxchg8b_emu.S                 |   4 +-
 arch/x86/lib/copy_page_64.S                  |   8 +-
 arch/x86/lib/copy_user_64.S                  |  21 +-
 arch/x86/lib/csum-copy_64.S                  |   4 +-
 arch/x86/lib/getuser.S                       |  22 +-
 arch/x86/lib/hweight.S                       |   8 +-
 arch/x86/lib/iomap_copy_64.S                 |   4 +-
 arch/x86/lib/memcpy_64.S                     |  20 +-
 arch/x86/lib/memmove_64.S                    |   8 +-
 arch/x86/lib/memset_64.S                     |  16 +-
 arch/x86/lib/msr-reg.S                       |   8 +-
 arch/x86/lib/putuser.S                       |  19 +-
 arch/x86/lib/retpoline.S                     |   4 +-
 arch/x86/math-emu/div_Xsig.S                 |   4 +-
 arch/x86/math-emu/div_small.S                |   4 +-
 arch/x86/math-emu/mul_Xsig.S                 |  12 +-
 arch/x86/math-emu/polynom_Xsig.S             |   4 +-
 arch/x86/math-emu/reg_norm.S                 |   8 +-
 arch/x86/math-emu/reg_round.S                |   4 +-
 arch/x86/math-emu/reg_u_add.S                |   4 +-
 arch/x86/math-emu/reg_u_div.S                |   4 +-
 arch/x86/math-emu/reg_u_mul.S                |   4 +-
 arch/x86/math-emu/reg_u_sub.S                |   4 +-
 arch/x86/math-emu/round_Xsig.S               |   8 +-
 arch/x86/math-emu/shr_Xsig.S                 |   4 +-
 arch/x86/math-emu/wm_shrx.S                  |   8 +-
 arch/x86/math-emu/wm_sqrt.S                  |   4 +-
 arch/x86/mm/mem_encrypt_boot.S               |   8 +-
 arch/x86/platform/efi/efi_stub_32.S          |   4 +-
 arch/x86/platform/efi/efi_stub_64.S          |   4 +-
 arch/x86/platform/efi/efi_thunk_64.S         |  16 +-
 arch/x86/platform/olpc/xo1-wakeup.S          |   3 +-
 arch/x86/platform/pvh/head.S                 |  18 +-
 arch/x86/power/hibernate_asm_32.S            |  14 +-
 arch/x86/power/hibernate_asm_64.S            |  14 +-
 arch/x86/purgatory/entry64.S                 |  21 +-
 arch/x86/purgatory/setup-x86_64.S            |  14 +-
 arch/x86/purgatory/stack.S                   |   7 +-
 arch/x86/realmode/rm/header.S                |   8 +-
 arch/x86/realmode/rm/reboot.S                |  13 +-
 arch/x86/realmode/rm/stack.S                 |  14 +-
 arch/x86/realmode/rm/trampoline_32.S         |  16 +-
 arch/x86/realmode/rm/trampoline_64.S         |  29 ++-
 arch/x86/realmode/rm/trampoline_common.S     |   2 +-
 arch/x86/realmode/rm/wakeup_asm.S            |  15 +-
 arch/x86/realmode/rmpiggy.S                  |  10 +-
 arch/x86/um/vdso/vdso.S                      |   6 +-
 arch/x86/xen/xen-asm.S                       |  28 +--
 arch/x86/xen/xen-asm_32.S                    |   7 +-
 arch/x86/xen/xen-asm_64.S                    |  34 +--
 arch/x86/xen/xen-head.S                      |   8 +-
 include/linux/linkage.h                      | 249 ++++++++++++++++++-
 124 files changed, 1475 insertions(+), 988 deletions(-)
 create mode 100644 Documentation/asm-annotations.rst
Signature · 1 line
2.23.0
author
#1 lore raw

PATCH v9 1/28 linkage: Introduce new macros for assembler symbols

Introduce new C macros for annotations of functions and data in assembly. There is a long-standing mess in macros like ENTRY, END, ENDPROC and similar. They are used in different manners and sometimes incorrectly.

So introduce macros with clear use to annotate assembly as follows:

a) Support macros for the ones below
SYM_T_FUNC -- type used by assembler to mark functions SYM_T_OBJECT -- type used by assembler to mark data SYM_T_NONE -- type used by assembler to mark entries of unknown type

They are defined as STT_FUNC, STT_OBJECT, and STT_NOTYPE respectively. According to the gas manual, this is the most portable way. I am not sure about other assemblers, so this can be switched back to %function and %object if this turns into a problem. Architectures can also override them by something like ", @function" if they need.

SYM_A_ALIGN, SYM_A_NONE -- align the symbol? SYM_L_GLOBAL, SYM_L_WEAK, SYM_L_LOCAL -- linkage of symbols

b) Mostly internal annotations, used by the ones below SYM_ENTRY -- use only if you have to (for non-paired symbols) SYM_START -- use only if you have to (for paired symbols) SYM_END -- use only if you have to (for paired symbols)

c) Annotations for code
SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code SYM_INNER_LABEL -- only for labels in the middle of code

SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for
one function
SYM_FUNC_START_ALIAS -- use where there are two global names for one
function
SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function

SYM_FUNC_START -- use for global functions SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment SYM_FUNC_START_LOCAL -- use for local functions SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o
alignment
SYM_FUNC_START_WEAK -- use for weak functions SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START,

	SYM_FUNC_START_WEAK, ...

For functions with special (non-C) calling conventions:
SYM_CODE_START -- use for non-C (special) functions SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o
alignment
SYM_CODE_START_LOCAL -- use for local non-C (special) functions SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special)
functions, w/o alignment
SYM_CODE_END -- the end of SYM_CODE_START_LOCAL or SYM_CODE_START

d) For data
SYM_DATA_START -- global data symbol SYM_DATA_START_LOCAL -- local data symbol SYM_DATA_END -- the end of the SYM_DATA_START symbol SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol SYM_DATA -- start+end wrapper around simple global data SYM_DATA_LOCAL -- start+end wrapper around simple local data

==========

The macros allow to pair starts and ends of functions and mark functions correctly in the output ELF objects.

All users of the old macros in x86 are converted to use these in further patches.

Cc Andrew Morton <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Len Brown <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Thomas Gleixner <[email protected]>

---

Notes:
[v2]
* use SYM_ prefix and sane names
* add SYM_START and SYM_END and parametrize all the macros

[v3]
* add SYM_DATA, SYM_DATA_LOCAL, and SYM_DATA_END_LABEL

[v4]
* add _NOALIGN versions of some macros
* add _CODE_ derivates of _FUNC_ macros

[v5]
* drop "SIMPLE" from data annotations
* switch NOALIGN and ALIGN variants of inner labels
* s/visibility/linkage/; s@SYM_V_@SYM_L_@
* add Documentation

[v6]
* fixed typos found by Randy Dunlap
* remove doubled INNER_LABEL macros, one pair was unused

[v8]
* use lkml.kernel.org for links
* link the docs from index.rst (by Boris)
* fixed typos on the docs

[v9]
* updated the docs as requested by Boris

 Documentation/asm-annotations.rst | 216 ++++++++++++++++++++++++++
 Documentation/index.rst           |   8 +
 arch/x86/include/asm/linkage.h    |  10 +-
 include/linux/linkage.h           | 245 +++++++++++++++++++++++++++++-
 4 files changed, 468 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/asm-annotations.rst
Documentation/asm-annotations.rst new file +216 -0
new file mode 100644
index 000000000000..29ccd6e61fe5
@@ -0,0 +1,216 @@
+Assembler Annotations
+=====================
+
+Copyright (c) 2017-2019 Jiri Slaby
+
+This document describes the new macros for annotation of data and code in
+assembly. In particular, it contains information about ``SYM_FUNC_START``,
+``SYM_FUNC_END``, ``SYM_CODE_START``, and similar.
+
+Rationale
+---------
+Some code like entries, trampolines, or boot code needs to be written in
+assembly. The same as in C, such code is grouped into functions and
+accompanied with data. Standard assemblers do not force users into precisely
+marking these pieces as code, data, or even specifying their length.
+Nevertheless, assemblers provide developers with such annotations to aid
+debuggers throughout assembly. On top of that, developers also want to mark
+some functions as *global* in order to be visible outside of their translation
+units.
+
+Over time, the Linux kernel has adopted macros from various projects (like
+``binutils``) to facilitate such annotations. So for historic reasons,
+developers have been using ``ENTRY``, ``END``, ``ENDPROC``, and other
+annotations in assembly.  Due to the lack of their documentation, the macros
+are used in rather wrong contexts at some locations. Clearly, ``ENTRY`` was
+intended to denote the beginning of global symbols (be it data or code).
+``END`` used to mark the end of data or end of special functions with
+*non-standard* calling convention. In contrast, ``ENDPROC`` should annotate
+only ends of *standard* functions.
+
+When these macros are used correctly, they help assemblers generate a nice
+object with both sizes and types set correctly. For example, the result of
+``arch/x86/lib/putuser.S``::
+
+   Num:    Value          Size Type    Bind   Vis      Ndx Name
+    25: 0000000000000000    33 FUNC    GLOBAL DEFAULT    1 __put_user_1
+    29: 0000000000000030    37 FUNC    GLOBAL DEFAULT    1 __put_user_2
+    32: 0000000000000060    36 FUNC    GLOBAL DEFAULT    1 __put_user_4
+    35: 0000000000000090    37 FUNC    GLOBAL DEFAULT    1 __put_user_8
+
+This is not only important for debugging purposes. When there are properly
+annotated objects like this, tools can be run on them to generate more useful
+information. In particular, on properly annotated objects, ``objtool`` can be
+run to check and fix the object if needed. Currently, ``objtool`` can report
+missing frame pointer setup/destruction in functions. It can also
+automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+for most code. Both of these are especially important to support reliable
+stack traces which are in turn necessary for :doc:`Kernel live patching
+<livepatch/livepatch>`.
+
+Caveat and Discussion
+---------------------
+As one might realize, there were only three macros previously. That is indeed
+insufficient to cover all the combinations of cases:
+
+* standard/non-standard function
+* code/data
+* global/local symbol
+
+There was a discussion_ and instead of extending the current ``ENTRY/END*``
+macros, it was decided that brand new macros should be introduced instead::
+
+    So how about using macro names that actually show the purpose, instead
+    of importing all the crappy, historic, essentially randomly chosen
+    debug symbol macro names from the binutils and older kernels?
+
+.. _discussion: https://lkml.kernel.org/r/[email protected]
+
+Macros Description
+------------------
+
+The new macros are prefixed with the ``SYM_`` prefix and can be divided into
+three main groups:
+
+1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with
+   standard C calling conventions, i.e. the stack contains a return address at
+   the predefined place and a return from the function can happen in a
+   standard way. When frame pointers are enabled, save/restore of frame
+   pointer shall happen at the start/end of a function, respectively, too.
+
+   Checking tools like ``objtool`` should ensure such marked functions conform
+   to these rules. The tools can also easily annotate these functions with
+   debugging information (like *ORC data*) automatically.
+
+2. ``SYM_CODE_*`` -- special functions called with special stack. Be it
+   interrupt handlers with special stack content, trampolines, or startup
+   functions.
+
+   Checking tools mostly ignore checking of these functions. But some debug
+   information still can be generated automatically. For correct debug data,
+   this code needs hints like ``UNWIND_HINT_REGS`` provided by developers.
+
+3. ``SYM_DATA*`` -- obviously data belonging to ``.data`` sections and not to
+   ``.text``. Data do not contain instructions, so they have to be treated
+   specially by the tools: they should not treat the bytes as instructions,
+   nor assign any debug information to them.
+
+Instruction Macros
+~~~~~~~~~~~~~~~~~~
+This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
+
+* ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
+  most frequent markings**. They are used for functions with standard calling
+  conventions -- global and local. Like in C, they both align the functions to
+  architecture specific ``__ALIGN`` bytes. There are also ``_NOALIGN`` variants
+  for special cases where developers do not want this implicit alignment.
+
+  ``SYM_FUNC_START_WEAK`` and ``SYM_FUNC_START_WEAK_NOALIGN`` markings are
+  also offered as an assembler counterpart to the *weak* attribute known from
+  C.
+
+  All of these **shall** be coupled with ``SYM_FUNC_END``. First, it marks
+  the sequence of instructions as a function and computes its size to the
+  generated object file. Second, it also eases checking and processing such
+  object files as the tools can trivially find exact function boundaries.
+
+  So in most cases, developers should write something like in the following
+  example, having some asm instructions in between the macros, of course::
+
+    SYM_FUNC_START(function_hook)
+        ... asm insns ...
+    SYM_FUNC_END(function_hook)
+
+  In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
+  and ``ENDPROC`` macros.
+
+* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
+  who decided to have two or more names for one function. The typical use is::
+
+    SYM_FUNC_START_ALIAS(__memset)
+    SYM_FUNC_START(memset)
+        ... asm insns ...
+    SYM_FUNC_END(memset)
+    SYM_FUNC_END_ALIAS(__memset)
+
+  In this example, one can call ``__memset`` or ``memset`` with the same
+  result, except the debug information for the instructions is generated to
+  the object file only once -- for the non-``ALIAS`` case.
+
+* ``SYM_CODE_START`` and ``SYM_CODE_START_LOCAL`` should be used only in
+  special cases -- if you know what you are doing. This is used exclusively
+  for interrupt handlers and similar where the calling convention is not the C
+  one. ``_NOALIGN`` variants exist too. The use is the same as for the ``FUNC``
+  category above::
+
+    SYM_CODE_START_LOCAL(bad_put_user)
+        ... asm insns ...
+    SYM_CODE_END(bad_put_user)
+
+  Again, every ``SYM_CODE_START*`` **shall** be coupled by ``SYM_CODE_END``.
+
+  To some extent, this category corresponds to deprecated ``ENTRY`` and
+  ``END``. Except ``END`` had several other meanings too.
+
+* ``SYM_INNER_LABEL*`` is used to denote a label inside some
+  ``SYM_{CODE,FUNC}_START`` and ``SYM_{CODE,FUNC}_END``.  They are very similar
+  to C labels, except they can be made global. An example of use::
+
+    SYM_CODE_START(ftrace_caller)
+        /* save_mcount_regs fills in first two parameters */
+        ...
+
+    SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
+        /* Load the ftrace_ops into the 3rd parameter */
+        ...
+
+    SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+        call ftrace_stub
+        ...
+        retq
+    SYM_CODE_END(ftrace_caller)
+
+Data Macros
+~~~~~~~~~~~
+Similar to instructions, there is a couple of macros to describe data in the
+assembly.
+
+* ``SYM_DATA_START`` and ``SYM_DATA_START_LOCAL`` mark the start of some data
+  and shall be used in conjunction with either ``SYM_DATA_END``, or
+  ``SYM_DATA_END_LABEL``. The latter adds also a label to the end, so that
+  people can use ``lstack`` and (local) ``lstack_end`` in the following
+  example::
+
+    SYM_DATA_START_LOCAL(lstack)
+        .skip 4096
+    SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
+
+* ``SYM_DATA`` and ``SYM_DATA_LOCAL`` are variants for simple, mostly one-line
+  data::
+
+    SYM_DATA(HEAP,     .long rm_heap)
+    SYM_DATA(heap_end, .long rm_stack)
+
+  In the end, they expand to ``SYM_DATA_START`` with ``SYM_DATA_END``
+  internally.
+
+Support Macros
+~~~~~~~~~~~~~~
+All the above reduce themselves to some invocation of ``SYM_START``,
+``SYM_END``, or ``SYM_ENTRY`` at last. Normally, developers should avoid using
+these.
+
+Further, in the above examples, one could see ``SYM_L_LOCAL``. There are also
+``SYM_L_GLOBAL`` and ``SYM_L_WEAK``. All are intended to denote linkage of a
+symbol marked by them. They are used either in ``_LABEL`` variants of the
+earlier macros, or in ``SYM_START``.
+
+
+Overriding Macros
+~~~~~~~~~~~~~~~~~
+Architecture can also override any of the macros in their own
+``asm/linkage.h``, including macros specifying the type of a symbol
+(``SYM_T_FUNC``, ``SYM_T_OBJECT``, and ``SYM_T_NONE``).  As every macro
+described in this file is surrounded by ``#ifdef`` + ``#endif``, it is enough
+to define the macros differently in the aforementioned architecture-dependent
+header.
Documentation/index.rst +8 -0
index b843e313d2f2..2ceab197246f 100644
@@ -135,6 +135,14 @@ needed).
    mic/index
    scheduler/index
 
+Architecture-agnostic documentation
+-----------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   asm-annotations
+
 Architecture-specific documentation
 -----------------------------------
 
arch/x86/include/asm/linkage.h +7 -3
index 14caa9d9fb7f..e07188e8d763 100644
@@ -13,9 +13,13 @@
 
 #ifdef __ASSEMBLY__
 
-#define GLOBAL(name)	\
-	.globl name;	\
-	name:
+/*
+ * GLOBAL is DEPRECATED
+ *
+ * use SYM_DATA_START, SYM_FUNC_START, SYM_INNER_LABEL, SYM_CODE_START, or
+ * similar
+ */
+#define GLOBAL(name)	SYM_ENTRY(name, SYM_L_GLOBAL, SYM_A_NONE)
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
 #define __ALIGN		.p2align 4, 0x90
include/linux/linkage.h +237 -8

280 lines not on this page · raw message

Signature · 7 lines
2.23.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
maintainer Acked-by on v9 1/28
#2 lore raw

Re: [PATCH v9 01/28] linkage: Introduce new macros for assembler symbols

Quoted 84 lines · Jiri Slaby

Introduce new C macros for annotations of functions and data in assembly. There is a long-standing mess in macros like ENTRY, END, ENDPROC and similar. They are used in different manners and sometimes incorrectly.

So introduce macros with clear use to annotate assembly as follows:

a) Support macros for the ones below
SYM_T_FUNC -- type used by assembler to mark functions SYM_T_OBJECT -- type used by assembler to mark data SYM_T_NONE -- type used by assembler to mark entries of unknown type

They are defined as STT_FUNC, STT_OBJECT, and STT_NOTYPE respectively. According to the gas manual, this is the most portable way. I am not sure about other assemblers, so this can be switched back to %function and %object if this turns into a problem. Architectures can also override them by something like ", @function" if they need.

SYM_A_ALIGN, SYM_A_NONE -- align the symbol? SYM_L_GLOBAL, SYM_L_WEAK, SYM_L_LOCAL -- linkage of symbols

b) Mostly internal annotations, used by the ones below SYM_ENTRY -- use only if you have to (for non-paired symbols) SYM_START -- use only if you have to (for paired symbols) SYM_END -- use only if you have to (for paired symbols)

c) Annotations for code
SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code SYM_INNER_LABEL -- only for labels in the middle of code

SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for
one function
SYM_FUNC_START_ALIAS -- use where there are two global names for one
function
SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function

SYM_FUNC_START -- use for global functions SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment SYM_FUNC_START_LOCAL -- use for local functions SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o
alignment
SYM_FUNC_START_WEAK -- use for weak functions SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START,

        SYM_FUNC_START_WEAK, ...

For functions with special (non-C) calling conventions:
SYM_CODE_START -- use for non-C (special) functions SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o
alignment
SYM_CODE_START_LOCAL -- use for local non-C (special) functions SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special)
functions, w/o alignment
SYM_CODE_END -- the end of SYM_CODE_START_LOCAL or SYM_CODE_START

d) For data
SYM_DATA_START -- global data symbol SYM_DATA_START_LOCAL -- local data symbol SYM_DATA_END -- the end of the SYM_DATA_START symbol SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol SYM_DATA -- start+end wrapper around simple global data SYM_DATA_LOCAL -- start+end wrapper around simple local data

==========

The macros allow to pair starts and ends of functions and mark functions correctly in the output ELF objects.

All users of the old macros in x86 are converted to use these in further patches.

Quoted 8 lines
Cc Borislav Petkov <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Thomas Gleixner <[email protected]>

for all the changes in the series affecting the power management code maintained by me.

Thanks!

Quoted 590 lines

---

Notes:
[v2]
* use SYM_ prefix and sane names
* add SYM_START and SYM_END and parametrize all the macros

[v3]
* add SYM_DATA, SYM_DATA_LOCAL, and SYM_DATA_END_LABEL

[v4]
* add _NOALIGN versions of some macros
* add _CODE_ derivates of _FUNC_ macros

[v5]
* drop "SIMPLE" from data annotations
* switch NOALIGN and ALIGN variants of inner labels
* s/visibility/linkage/; s@SYM_V_@SYM_L_@
* add Documentation

[v6]
* fixed typos found by Randy Dunlap
* remove doubled INNER_LABEL macros, one pair was unused

[v8]
* use lkml.kernel.org for links
* link the docs from index.rst (by Boris)
* fixed typos on the docs

[v9]
* updated the docs as requested by Boris

 Documentation/asm-annotations.rst | 216 ++++++++++++++++++++++++++
 Documentation/index.rst           |   8 +
 arch/x86/include/asm/linkage.h    |  10 +-
 include/linux/linkage.h           | 245 +++++++++++++++++++++++++++++-
 4 files changed, 468 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/asm-annotations.rst
Documentation/asm-annotations.rst new file +216 -0
new file mode 100644
index 000000000000..29ccd6e61fe5
@@ -0,0 +1,216 @@
+Assembler Annotations
+=====================
+
+Copyright (c) 2017-2019 Jiri Slaby
+
+This document describes the new macros for annotation of data and code in
+assembly. In particular, it contains information about ``SYM_FUNC_START``,
+``SYM_FUNC_END``, ``SYM_CODE_START``, and similar.
+
+Rationale
+---------
+Some code like entries, trampolines, or boot code needs to be written in
+assembly. The same as in C, such code is grouped into functions and
+accompanied with data. Standard assemblers do not force users into precisely
+marking these pieces as code, data, or even specifying their length.
+Nevertheless, assemblers provide developers with such annotations to aid
+debuggers throughout assembly. On top of that, developers also want to mark
+some functions as *global* in order to be visible outside of their translation
+units.
+
+Over time, the Linux kernel has adopted macros from various projects (like
+``binutils``) to facilitate such annotations. So for historic reasons,
+developers have been using ``ENTRY``, ``END``, ``ENDPROC``, and other
+annotations in assembly.  Due to the lack of their documentation, the macros
+are used in rather wrong contexts at some locations. Clearly, ``ENTRY`` was
+intended to denote the beginning of global symbols (be it data or code).
+``END`` used to mark the end of data or end of special functions with
+*non-standard* calling convention. In contrast, ``ENDPROC`` should annotate
+only ends of *standard* functions.
+
+When these macros are used correctly, they help assemblers generate a nice
+object with both sizes and types set correctly. For example, the result of
+``arch/x86/lib/putuser.S``::
+
+   Num:    Value          Size Type    Bind   Vis      Ndx Name
+    25: 0000000000000000    33 FUNC    GLOBAL DEFAULT    1 __put_user_1
+    29: 0000000000000030    37 FUNC    GLOBAL DEFAULT    1 __put_user_2
+    32: 0000000000000060    36 FUNC    GLOBAL DEFAULT    1 __put_user_4
+    35: 0000000000000090    37 FUNC    GLOBAL DEFAULT    1 __put_user_8
+
+This is not only important for debugging purposes. When there are properly
+annotated objects like this, tools can be run on them to generate more useful
+information. In particular, on properly annotated objects, ``objtool`` can be
+run to check and fix the object if needed. Currently, ``objtool`` can report
+missing frame pointer setup/destruction in functions. It can also
+automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+for most code. Both of these are especially important to support reliable
+stack traces which are in turn necessary for :doc:`Kernel live patching
+<livepatch/livepatch>`.
+
+Caveat and Discussion
+---------------------
+As one might realize, there were only three macros previously. That is indeed
+insufficient to cover all the combinations of cases:
+
+* standard/non-standard function
+* code/data
+* global/local symbol
+
+There was a discussion_ and instead of extending the current ``ENTRY/END*``
+macros, it was decided that brand new macros should be introduced instead::
+
+    So how about using macro names that actually show the purpose, instead
+    of importing all the crappy, historic, essentially randomly chosen
+    debug symbol macro names from the binutils and older kernels?
+
+.. _discussion: https://lkml.kernel.org/r/[email protected]
+
+Macros Description
+------------------
+
+The new macros are prefixed with the ``SYM_`` prefix and can be divided into
+three main groups:
+
+1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with
+   standard C calling conventions, i.e. the stack contains a return address at
+   the predefined place and a return from the function can happen in a
+   standard way. When frame pointers are enabled, save/restore of frame
+   pointer shall happen at the start/end of a function, respectively, too.
+
+   Checking tools like ``objtool`` should ensure such marked functions conform
+   to these rules. The tools can also easily annotate these functions with
+   debugging information (like *ORC data*) automatically.
+
+2. ``SYM_CODE_*`` -- special functions called with special stack. Be it
+   interrupt handlers with special stack content, trampolines, or startup
+   functions.
+
+   Checking tools mostly ignore checking of these functions. But some debug
+   information still can be generated automatically. For correct debug data,
+   this code needs hints like ``UNWIND_HINT_REGS`` provided by developers.
+
+3. ``SYM_DATA*`` -- obviously data belonging to ``.data`` sections and not to
+   ``.text``. Data do not contain instructions, so they have to be treated
+   specially by the tools: they should not treat the bytes as instructions,
+   nor assign any debug information to them.
+
+Instruction Macros
+~~~~~~~~~~~~~~~~~~
+This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
+
+* ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
+  most frequent markings**. They are used for functions with standard calling
+  conventions -- global and local. Like in C, they both align the functions to
+  architecture specific ``__ALIGN`` bytes. There are also ``_NOALIGN`` variants
+  for special cases where developers do not want this implicit alignment.
+
+  ``SYM_FUNC_START_WEAK`` and ``SYM_FUNC_START_WEAK_NOALIGN`` markings are
+  also offered as an assembler counterpart to the *weak* attribute known from
+  C.
+
+  All of these **shall** be coupled with ``SYM_FUNC_END``. First, it marks
+  the sequence of instructions as a function and computes its size to the
+  generated object file. Second, it also eases checking and processing such
+  object files as the tools can trivially find exact function boundaries.
+
+  So in most cases, developers should write something like in the following
+  example, having some asm instructions in between the macros, of course::
+
+    SYM_FUNC_START(function_hook)
+        ... asm insns ...
+    SYM_FUNC_END(function_hook)
+
+  In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
+  and ``ENDPROC`` macros.
+
+* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
+  who decided to have two or more names for one function. The typical use is::
+
+    SYM_FUNC_START_ALIAS(__memset)
+    SYM_FUNC_START(memset)
+        ... asm insns ...
+    SYM_FUNC_END(memset)
+    SYM_FUNC_END_ALIAS(__memset)
+
+  In this example, one can call ``__memset`` or ``memset`` with the same
+  result, except the debug information for the instructions is generated to
+  the object file only once -- for the non-``ALIAS`` case.
+
+* ``SYM_CODE_START`` and ``SYM_CODE_START_LOCAL`` should be used only in
+  special cases -- if you know what you are doing. This is used exclusively
+  for interrupt handlers and similar where the calling convention is not the C
+  one. ``_NOALIGN`` variants exist too. The use is the same as for the ``FUNC``
+  category above::
+
+    SYM_CODE_START_LOCAL(bad_put_user)
+        ... asm insns ...
+    SYM_CODE_END(bad_put_user)
+
+  Again, every ``SYM_CODE_START*`` **shall** be coupled by ``SYM_CODE_END``.
+
+  To some extent, this category corresponds to deprecated ``ENTRY`` and
+  ``END``. Except ``END`` had several other meanings too.
+
+* ``SYM_INNER_LABEL*`` is used to denote a label inside some
+  ``SYM_{CODE,FUNC}_START`` and ``SYM_{CODE,FUNC}_END``.  They are very similar
+  to C labels, except they can be made global. An example of use::
+
+    SYM_CODE_START(ftrace_caller)
+        /* save_mcount_regs fills in first two parameters */
+        ...
+
+    SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
+        /* Load the ftrace_ops into the 3rd parameter */
+        ...
+
+    SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+        call ftrace_stub
+        ...
+        retq
+    SYM_CODE_END(ftrace_caller)
+
+Data Macros
+~~~~~~~~~~~
+Similar to instructions, there is a couple of macros to describe data in the
+assembly.
+
+* ``SYM_DATA_START`` and ``SYM_DATA_START_LOCAL`` mark the start of some data
+  and shall be used in conjunction with either ``SYM_DATA_END``, or
+  ``SYM_DATA_END_LABEL``. The latter adds also a label to the end, so that
+  people can use ``lstack`` and (local) ``lstack_end`` in the following
+  example::
+
+    SYM_DATA_START_LOCAL(lstack)
+        .skip 4096
+    SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
+
+* ``SYM_DATA`` and ``SYM_DATA_LOCAL`` are variants for simple, mostly one-line
+  data::
+
+    SYM_DATA(HEAP,     .long rm_heap)
+    SYM_DATA(heap_end, .long rm_stack)
+
+  In the end, they expand to ``SYM_DATA_START`` with ``SYM_DATA_END``
+  internally.
+
+Support Macros
+~~~~~~~~~~~~~~
+All the above reduce themselves to some invocation of ``SYM_START``,
+``SYM_END``, or ``SYM_ENTRY`` at last. Normally, developers should avoid using
+these.
+
+Further, in the above examples, one could see ``SYM_L_LOCAL``. There are also
+``SYM_L_GLOBAL`` and ``SYM_L_WEAK``. All are intended to denote linkage of a
+symbol marked by them. They are used either in ``_LABEL`` variants of the
+earlier macros, or in ``SYM_START``.
+
+
+Overriding Macros
+~~~~~~~~~~~~~~~~~
+Architecture can also override any of the macros in their own
+``asm/linkage.h``, including macros specifying the type of a symbol
+(``SYM_T_FUNC``, ``SYM_T_OBJECT``, and ``SYM_T_NONE``).  As every macro
+described in this file is surrounded by ``#ifdef`` + ``#endif``, it is enough
+to define the macros differently in the aforementioned architecture-dependent
+header.
Documentation/index.rst +8 -0
index b843e313d2f2..2ceab197246f 100644
@@ -135,6 +135,14 @@ needed).
    mic/index
    scheduler/index
 
+Architecture-agnostic documentation
+-----------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   asm-annotations
+
 Architecture-specific documentation
 -----------------------------------
 
arch/x86/include/asm/linkage.h +7 -3
index 14caa9d9fb7f..e07188e8d763 100644
@@ -13,9 +13,13 @@
 
 #ifdef __ASSEMBLY__
 
-#define GLOBAL(name)   \
-       .globl name;    \
-       name:
+/*
+ * GLOBAL is DEPRECATED
+ *
+ * use SYM_DATA_START, SYM_FUNC_START, SYM_INNER_LABEL, SYM_CODE_START, or
+ * similar
+ */
+#define GLOBAL(name)   SYM_ENTRY(name, SYM_L_GLOBAL, SYM_A_NONE)
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
 #define __ALIGN                .p2align 4, 0x90
include/linux/linkage.h +237 -9
index 7e020782ade2..f3ae8f3dea2c 100644
@@ -75,32 +75,58 @@
 
 #ifdef __ASSEMBLY__
 
+/* SYM_T_FUNC -- type used by assembler to mark functions */
+#ifndef SYM_T_FUNC
+#define SYM_T_FUNC                             STT_FUNC
+#endif
+
+/* SYM_T_OBJECT -- type used by assembler to mark data */
+#ifndef SYM_T_OBJECT
+#define SYM_T_OBJECT                           STT_OBJECT
+#endif
+
+/* SYM_T_NONE -- type used by assembler to mark entries of unknown type */
+#ifndef SYM_T_NONE
+#define SYM_T_NONE                             STT_NOTYPE
+#endif
+
+/* SYM_A_* -- align the symbol? */
+#define SYM_A_ALIGN                            ALIGN
+#define SYM_A_NONE                             /* nothing */
+
+/* SYM_L_* -- linkage of symbols */
+#define SYM_L_GLOBAL(name)                     .globl name
+#define SYM_L_WEAK(name)                       .weak name
+#define SYM_L_LOCAL(name)                      /* nothing */
+
 #ifndef LINKER_SCRIPT
 #define ALIGN __ALIGN
 #define ALIGN_STR __ALIGN_STR
 
+/* === DEPRECATED annotations === */
+
 #ifndef GLOBAL
+/* deprecated, use SYM_DATA*, SYM_ENTRY, or similar */
 #define GLOBAL(name) \
        .globl name ASM_NL \
        name:
 #endif
 
 #ifndef ENTRY
+/* deprecated, use SYM_FUNC_START */
 #define ENTRY(name) \
-       .globl name ASM_NL \
-       ALIGN ASM_NL \
-       name:
+       SYM_FUNC_START(name)
 #endif
 #endif /* LINKER_SCRIPT */
 
 #ifndef WEAK
+/* deprecated, use SYM_FUNC_START_WEAK* */
 #define WEAK(name)        \
-       .weak name ASM_NL   \
-       ALIGN ASM_NL \
-       name:
+       SYM_FUNC_START_WEAK(name)
 #endif
 
 #ifndef END
+/* deprecated, use SYM_FUNC_END, SYM_DATA_END, or SYM_END */
 #define END(name) \
        .size name, .-name
 #endif
@@ -110,11 +136,214 @@
  * static analysis tools such as stack depth analyzer.
  */
 #ifndef ENDPROC
+/* deprecated, use SYM_FUNC_END */
 #define ENDPROC(name) \
-       .type name, @function ASM_NL \
-       END(name)
+       SYM_FUNC_END(name)
+#endif
+
+/* === generic annotations === */
+
+/* SYM_ENTRY -- use only if you have to for non-paired symbols */
+#ifndef SYM_ENTRY
+#define SYM_ENTRY(name, linkage, align...)             \
+       linkage(name) ASM_NL                            \
+       align ASM_NL                                    \
+       name:
+#endif
+
+/* SYM_START -- use only if you have to */
+#ifndef SYM_START
+#define SYM_START(name, linkage, align...)             \
+       SYM_ENTRY(name, linkage, align)
+#endif
+
+/* SYM_END -- use only if you have to */
+#ifndef SYM_END
+#define SYM_END(name, sym_type)                                \
+       .type name sym_type ASM_NL                      \
+       .size name, .-name
+#endif
+
+/* === code annotations === */
+
+/*
+ * FUNC -- C-like functions (proper stack frame etc.)
+ * CODE -- non-C code (e.g. irq handlers with different, special stack etc.)
+ *
+ * Objtool validates stack for FUNC, but not for CODE.
+ * Objtool generates debug info for both FUNC & CODE, but needs special
+ * annotations for each CODE's start (to describe the actual stack frame).
+ *
+ * ALIAS -- does not generate debug info -- the aliased function will
+ */
+
+/* SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code */
+#ifndef SYM_INNER_LABEL_ALIGN
+#define SYM_INNER_LABEL_ALIGN(name, linkage)   \
+       .type name SYM_T_NONE ASM_NL                    \
+       SYM_ENTRY(name, linkage, SYM_A_ALIGN)
+#endif
+
+/* SYM_INNER_LABEL -- only for labels in the middle of code */
+#ifndef SYM_INNER_LABEL
+#define SYM_INNER_LABEL(name, linkage)         \
+       .type name SYM_T_NONE ASM_NL                    \
+       SYM_ENTRY(name, linkage, SYM_A_NONE)
+#endif
+
+/*
+ * SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for one
+ * function
+ */
+#ifndef SYM_FUNC_START_LOCAL_ALIAS
+#define SYM_FUNC_START_LOCAL_ALIAS(name)               \
+       SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
+#endif
+
+/*
+ * SYM_FUNC_START_ALIAS -- use where there are two global names for one
+ * function
+ */
+#ifndef SYM_FUNC_START_ALIAS
+#define SYM_FUNC_START_ALIAS(name)                     \
+       SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
+#endif
+
+/* SYM_FUNC_START -- use for global functions */
+#ifndef SYM_FUNC_START
+/*
+ * The same as SYM_FUNC_START_ALIAS, but we will need to distinguish these two
+ * later.
+ */
+#define SYM_FUNC_START(name)                           \
+       SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
+#endif
+
+/* SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment */
+#ifndef SYM_FUNC_START_NOALIGN
+#define SYM_FUNC_START_NOALIGN(name)                   \
+       SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
+#endif
+
+/* SYM_FUNC_START_LOCAL -- use for local functions */
+#ifndef SYM_FUNC_START_LOCAL
+/* the same as SYM_FUNC_START_LOCAL_ALIAS, see comment near SYM_FUNC_START */
+#define SYM_FUNC_START_LOCAL(name)                     \
+       SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
 #endif
 
+/* SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o alignment */
+#ifndef SYM_FUNC_START_LOCAL_NOALIGN
+#define SYM_FUNC_START_LOCAL_NOALIGN(name)             \
+       SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
 #endif
 
+/* SYM_FUNC_START_WEAK -- use for weak functions */
+#ifndef SYM_FUNC_START_WEAK
+#define SYM_FUNC_START_WEAK(name)                      \
+       SYM_START(name, SYM_L_WEAK, SYM_A_ALIGN)
 #endif
+
+/* SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment */
+#ifndef SYM_FUNC_START_WEAK_NOALIGN
+#define SYM_FUNC_START_WEAK_NOALIGN(name)              \
+       SYM_START(name, SYM_L_WEAK, SYM_A_NONE)
+#endif
+
+/* SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function */
+#ifndef SYM_FUNC_END_ALIAS
+#define SYM_FUNC_END_ALIAS(name)                       \
+       SYM_END(name, SYM_T_FUNC)
+#endif
+
+/*
+ * SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START,
+ * SYM_FUNC_START_WEAK, ...
+ */
+#ifndef SYM_FUNC_END
+/* the same as SYM_FUNC_END_ALIAS, see comment near SYM_FUNC_START */
+#define SYM_FUNC_END(name)                             \
+       SYM_END(name, SYM_T_FUNC)
+#endif
+
+/* SYM_CODE_START -- use for non-C (special) functions */
+#ifndef SYM_CODE_START
+#define SYM_CODE_START(name)                           \
+       SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
+#endif
+
+/* SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o alignment */
+#ifndef SYM_CODE_START_NOALIGN
+#define SYM_CODE_START_NOALIGN(name)                   \
+       SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
+#endif
+
+/* SYM_CODE_START_LOCAL -- use for local non-C (special) functions */
+#ifndef SYM_CODE_START_LOCAL
+#define SYM_CODE_START_LOCAL(name)                     \
+       SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
+#endif
+
+/*
+ * SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special) functions,
+ * w/o alignment
+ */
+#ifndef SYM_CODE_START_LOCAL_NOALIGN
+#define SYM_CODE_START_LOCAL_NOALIGN(name)             \
+       SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
+#endif
+
+/* SYM_CODE_END -- the end of SYM_CODE_START_LOCAL, SYM_CODE_START, ... */
+#ifndef SYM_CODE_END
+#define SYM_CODE_END(name)                             \
+       SYM_END(name, SYM_T_NONE)
+#endif
+
+/* === data annotations === */
+
+/* SYM_DATA_START -- global data symbol */
+#ifndef SYM_DATA_START
+#define SYM_DATA_START(name)                           \
+       SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
+#endif
+
+/* SYM_DATA_START -- local data symbol */
+#ifndef SYM_DATA_START_LOCAL
+#define SYM_DATA_START_LOCAL(name)                     \
+       SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
+#endif
+
+/* SYM_DATA_END -- the end of SYM_DATA_START symbol */
+#ifndef SYM_DATA_END
+#define SYM_DATA_END(name)                             \
+       SYM_END(name, SYM_T_OBJECT)
+#endif
+
+/* SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol */
+#ifndef SYM_DATA_END_LABEL
+#define SYM_DATA_END_LABEL(name, linkage, label)       \
+       linkage(label) ASM_NL                           \
+       .type label SYM_T_OBJECT ASM_NL                 \
+       label:                                          \
+       SYM_END(name, SYM_T_OBJECT)
+#endif
+
+/* SYM_DATA -- start+end wrapper around simple global data */
+#ifndef SYM_DATA
+#define SYM_DATA(name, data...)                                \
+       SYM_DATA_START(name) ASM_NL                             \
+       data ASM_NL                                             \
+       SYM_DATA_END(name)
+#endif
+
+/* SYM_DATA_LOCAL -- start+end wrapper around simple local data */
+#ifndef SYM_DATA_LOCAL
+#define SYM_DATA_LOCAL(name, data...)                  \
+       SYM_DATA_START_LOCAL(name) ASM_NL                       \
+       data ASM_NL                                             \
+       SYM_DATA_END(name)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _LINUX_LINKAGE_H */
--

2.23.0

merge bot Applied
#3 lore raw

[tip: x86/asm] linkage: Introduce new macros for assembler symbols

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     ffedeeb780dc554eff3d3b16e6a462a26a41d7ec
Gitweb:        https://git.kernel.org/tip/ffedeeb780dc554eff3d3b16e6a462a26a41d7ec
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:41 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 09:48:11 +02:00

linkage: Introduce new macros for assembler symbols

Introduce new C macros for annotations of functions and data in assembly. There is a long-standing mess in macros like ENTRY, END, ENDPROC and similar. They are used in different manners and sometimes incorrectly.

So introduce macros with clear use to annotate assembly as follows:

a) Support macros for the ones below
SYM_T_FUNC -- type used by assembler to mark functions SYM_T_OBJECT -- type used by assembler to mark data SYM_T_NONE -- type used by assembler to mark entries of unknown type

They are defined as STT_FUNC, STT_OBJECT, and STT_NOTYPE respectively. According to the gas manual, this is the most portable way. I am not sure about other assemblers, so this can be switched back to %function and %object if this turns into a problem. Architectures can also override them by something like ", @function" if they need.

SYM_A_ALIGN, SYM_A_NONE -- align the symbol? SYM_L_GLOBAL, SYM_L_WEAK, SYM_L_LOCAL -- linkage of symbols

b) Mostly internal annotations, used by the ones below SYM_ENTRY -- use only if you have to (for non-paired symbols) SYM_START -- use only if you have to (for paired symbols) SYM_END -- use only if you have to (for paired symbols)

c) Annotations for code
SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code SYM_INNER_LABEL -- only for labels in the middle of code

SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for
one function
SYM_FUNC_START_ALIAS -- use where there are two global names for one
function
SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function

SYM_FUNC_START -- use for global functions SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment SYM_FUNC_START_LOCAL -- use for local functions SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o
alignment
SYM_FUNC_START_WEAK -- use for weak functions SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START,

	SYM_FUNC_START_WEAK, ...

For functions with special (non-C) calling conventions:
SYM_CODE_START -- use for non-C (special) functions SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o
alignment
SYM_CODE_START_LOCAL -- use for local non-C (special) functions SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special)
functions, w/o alignment
SYM_CODE_END -- the end of SYM_CODE_START_LOCAL or SYM_CODE_START

d) For data
SYM_DATA_START -- global data symbol SYM_DATA_START_LOCAL -- local data symbol SYM_DATA_END -- the end of the SYM_DATA_START symbol SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol SYM_DATA -- start+end wrapper around simple global data SYM_DATA_LOCAL -- start+end wrapper around simple local data

==========

The macros allow to pair starts and ends of functions and mark functions correctly in the output ELF objects.

All users of the old macros in x86 are converted to use these in further patches.

Cc Andrew Morton <[email protected]>
Cc Andrey Ryabinin <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Len Brown <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
Cc x86-ml <[email protected]>
---
 Documentation/asm-annotations.rst | 216 ++++++++++++++++++++++++++-
 Documentation/index.rst           |   8 +-
 arch/x86/include/asm/linkage.h    |  10 +-
 include/linux/linkage.h           | 245 ++++++++++++++++++++++++++++-
 4 files changed, 468 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/asm-annotations.rst
Documentation/asm-annotations.rst new file +216 -0
new file mode 100644
index 0000000..29ccd6e
@@ -0,0 +1,216 @@
+Assembler Annotations
+=====================
+
+Copyright (c) 2017-2019 Jiri Slaby
+
+This document describes the new macros for annotation of data and code in
+assembly. In particular, it contains information about ``SYM_FUNC_START``,
+``SYM_FUNC_END``, ``SYM_CODE_START``, and similar.
+
+Rationale
+---------
+Some code like entries, trampolines, or boot code needs to be written in
+assembly. The same as in C, such code is grouped into functions and
+accompanied with data. Standard assemblers do not force users into precisely
+marking these pieces as code, data, or even specifying their length.
+Nevertheless, assemblers provide developers with such annotations to aid
+debuggers throughout assembly. On top of that, developers also want to mark
+some functions as *global* in order to be visible outside of their translation
+units.
+
+Over time, the Linux kernel has adopted macros from various projects (like
+``binutils``) to facilitate such annotations. So for historic reasons,
+developers have been using ``ENTRY``, ``END``, ``ENDPROC``, and other
+annotations in assembly.  Due to the lack of their documentation, the macros
+are used in rather wrong contexts at some locations. Clearly, ``ENTRY`` was
+intended to denote the beginning of global symbols (be it data or code).
+``END`` used to mark the end of data or end of special functions with
+*non-standard* calling convention. In contrast, ``ENDPROC`` should annotate
+only ends of *standard* functions.
+
+When these macros are used correctly, they help assemblers generate a nice
+object with both sizes and types set correctly. For example, the result of
+``arch/x86/lib/putuser.S``::
+
+   Num:    Value          Size Type    Bind   Vis      Ndx Name
+    25: 0000000000000000    33 FUNC    GLOBAL DEFAULT    1 __put_user_1
+    29: 0000000000000030    37 FUNC    GLOBAL DEFAULT    1 __put_user_2
+    32: 0000000000000060    36 FUNC    GLOBAL DEFAULT    1 __put_user_4
+    35: 0000000000000090    37 FUNC    GLOBAL DEFAULT    1 __put_user_8
+
+This is not only important for debugging purposes. When there are properly
+annotated objects like this, tools can be run on them to generate more useful
+information. In particular, on properly annotated objects, ``objtool`` can be
+run to check and fix the object if needed. Currently, ``objtool`` can report
+missing frame pointer setup/destruction in functions. It can also
+automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+for most code. Both of these are especially important to support reliable
+stack traces which are in turn necessary for :doc:`Kernel live patching
+<livepatch/livepatch>`.
+
+Caveat and Discussion
+---------------------
+As one might realize, there were only three macros previously. That is indeed
+insufficient to cover all the combinations of cases:
+
+* standard/non-standard function
+* code/data
+* global/local symbol
+
+There was a discussion_ and instead of extending the current ``ENTRY/END*``
+macros, it was decided that brand new macros should be introduced instead::
+
+    So how about using macro names that actually show the purpose, instead
+    of importing all the crappy, historic, essentially randomly chosen
+    debug symbol macro names from the binutils and older kernels?
+
+.. _discussion: https://lkml.kernel.org/r/[email protected]
+
+Macros Description
+------------------
+
+The new macros are prefixed with the ``SYM_`` prefix and can be divided into
+three main groups:
+
+1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with
+   standard C calling conventions, i.e. the stack contains a return address at
+   the predefined place and a return from the function can happen in a
+   standard way. When frame pointers are enabled, save/restore of frame
+   pointer shall happen at the start/end of a function, respectively, too.
+
+   Checking tools like ``objtool`` should ensure such marked functions conform
+   to these rules. The tools can also easily annotate these functions with
+   debugging information (like *ORC data*) automatically.
+
+2. ``SYM_CODE_*`` -- special functions called with special stack. Be it
+   interrupt handlers with special stack content, trampolines, or startup
+   functions.
+
+   Checking tools mostly ignore checking of these functions. But some debug
+   information still can be generated automatically. For correct debug data,
+   this code needs hints like ``UNWIND_HINT_REGS`` provided by developers.
+
+3. ``SYM_DATA*`` -- obviously data belonging to ``.data`` sections and not to
+   ``.text``. Data do not contain instructions, so they have to be treated
+   specially by the tools: they should not treat the bytes as instructions,
+   nor assign any debug information to them.
+
+Instruction Macros
+~~~~~~~~~~~~~~~~~~
+This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
+
+* ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
+  most frequent markings**. They are used for functions with standard calling
+  conventions -- global and local. Like in C, they both align the functions to
+  architecture specific ``__ALIGN`` bytes. There are also ``_NOALIGN`` variants
+  for special cases where developers do not want this implicit alignment.
+
+  ``SYM_FUNC_START_WEAK`` and ``SYM_FUNC_START_WEAK_NOALIGN`` markings are
+  also offered as an assembler counterpart to the *weak* attribute known from
+  C.
+
+  All of these **shall** be coupled with ``SYM_FUNC_END``. First, it marks
+  the sequence of instructions as a function and computes its size to the
+  generated object file. Second, it also eases checking and processing such
+  object files as the tools can trivially find exact function boundaries.
+
+  So in most cases, developers should write something like in the following
+  example, having some asm instructions in between the macros, of course::
+
+    SYM_FUNC_START(function_hook)
+        ... asm insns ...
+    SYM_FUNC_END(function_hook)
+
+  In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
+  and ``ENDPROC`` macros.
+
+* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
+  who decided to have two or more names for one function. The typical use is::
+
+    SYM_FUNC_START_ALIAS(__memset)
+    SYM_FUNC_START(memset)
+        ... asm insns ...
+    SYM_FUNC_END(memset)
+    SYM_FUNC_END_ALIAS(__memset)
+
+  In this example, one can call ``__memset`` or ``memset`` with the same
+  result, except the debug information for the instructions is generated to
+  the object file only once -- for the non-``ALIAS`` case.
+
+* ``SYM_CODE_START`` and ``SYM_CODE_START_LOCAL`` should be used only in
+  special cases -- if you know what you are doing. This is used exclusively
+  for interrupt handlers and similar where the calling convention is not the C
+  one. ``_NOALIGN`` variants exist too. The use is the same as for the ``FUNC``
+  category above::
+
+    SYM_CODE_START_LOCAL(bad_put_user)
+        ... asm insns ...
+    SYM_CODE_END(bad_put_user)
+
+  Again, every ``SYM_CODE_START*`` **shall** be coupled by ``SYM_CODE_END``.
+
+  To some extent, this category corresponds to deprecated ``ENTRY`` and
+  ``END``. Except ``END`` had several other meanings too.
+
+* ``SYM_INNER_LABEL*`` is used to denote a label inside some
+  ``SYM_{CODE,FUNC}_START`` and ``SYM_{CODE,FUNC}_END``.  They are very similar
+  to C labels, except they can be made global. An example of use::
+
+    SYM_CODE_START(ftrace_caller)
+        /* save_mcount_regs fills in first two parameters */
+        ...
+
+    SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
+        /* Load the ftrace_ops into the 3rd parameter */
+        ...
+
+    SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+        call ftrace_stub
+        ...
+        retq
+    SYM_CODE_END(ftrace_caller)
+
+Data Macros
+~~~~~~~~~~~
+Similar to instructions, there is a couple of macros to describe data in the
+assembly.
+
+* ``SYM_DATA_START`` and ``SYM_DATA_START_LOCAL`` mark the start of some data
+  and shall be used in conjunction with either ``SYM_DATA_END``, or
+  ``SYM_DATA_END_LABEL``. The latter adds also a label to the end, so that
+  people can use ``lstack`` and (local) ``lstack_end`` in the following
+  example::
+
+    SYM_DATA_START_LOCAL(lstack)
+        .skip 4096
+    SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
+
+* ``SYM_DATA`` and ``SYM_DATA_LOCAL`` are variants for simple, mostly one-line
+  data::
+
+    SYM_DATA(HEAP,     .long rm_heap)
+    SYM_DATA(heap_end, .long rm_stack)
+
+  In the end, they expand to ``SYM_DATA_START`` with ``SYM_DATA_END``
+  internally.
+
+Support Macros
+~~~~~~~~~~~~~~
+All the above reduce themselves to some invocation of ``SYM_START``,
+``SYM_END``, or ``SYM_ENTRY`` at last. Normally, developers should avoid using
+these.
+
+Further, in the above examples, one could see ``SYM_L_LOCAL``. There are also
+``SYM_L_GLOBAL`` and ``SYM_L_WEAK``. All are intended to denote linkage of a
+symbol marked by them. They are used either in ``_LABEL`` variants of the
+earlier macros, or in ``SYM_START``.
+
+
+Overriding Macros
+~~~~~~~~~~~~~~~~~
+Architecture can also override any of the macros in their own
+``asm/linkage.h``, including macros specifying the type of a symbol
+(``SYM_T_FUNC``, ``SYM_T_OBJECT``, and ``SYM_T_NONE``).  As every macro
+described in this file is surrounded by ``#ifdef`` + ``#endif``, it is enough
+to define the macros differently in the aforementioned architecture-dependent
+header.
Documentation/index.rst +8 -0
index b843e31..2ceab19 100644
@@ -135,6 +135,14 @@ needed).
    mic/index
    scheduler/index
 
+Architecture-agnostic documentation
+-----------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   asm-annotations
+
 Architecture-specific documentation
 -----------------------------------
 
arch/x86/include/asm/linkage.h +7 -3
index 14caa9d..e07188e 100644
@@ -13,9 +13,13 @@
 
 #ifdef __ASSEMBLY__
 
-#define GLOBAL(name)	\
-	.globl name;	\
-	name:
+/*
+ * GLOBAL is DEPRECATED
+ *
+ * use SYM_DATA_START, SYM_FUNC_START, SYM_INNER_LABEL, SYM_CODE_START, or
+ * similar
+ */
+#define GLOBAL(name)	SYM_ENTRY(name, SYM_L_GLOBAL, SYM_A_NONE)
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
 #define __ALIGN		.p2align 4, 0x90
include/linux/linkage.h +237 -8

280 lines not on this page · raw message

author
#4 lore raw

PATCH v9 2/28 x86/asm/suspend: Use SYM_DATA for data

In reply to Jiri Slaby

Some global data in the suspend code were marked as `ENTRY'. ENTRY was intended for functions and shall be paired with ENDPROC. ENTRY also aligns symbols to 16 bytes which creates unnecessary holes here between data. Note that:
* saved_magic (long) in wakeup_32 is still prepended by section's ALIGN
* saved_magic (quad) in wakeup_64 follows a bunch of quads which are aligned (but need not be aligned to 16)

Since historical markings are being dropped, make proper use of newly added SYM_DATA in this code.

---
 arch/x86/kernel/acpi/wakeup_32.S | 2 +-
 arch/x86/kernel/acpi/wakeup_64.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/acpi/wakeup_32.S +1 -1
index e95e95960156..427249292aef 100644
@@ -90,7 +90,7 @@ ret_point:
 
 .data
 ALIGN
-ENTRY(saved_magic)	.long	0
+SYM_DATA(saved_magic,	.long 0)
 saved_eip:		.long 0
 
 # saved registers
arch/x86/kernel/acpi/wakeup_64.S +1 -1
index 7f9ade13bbcf..462a20f386e0 100644
@@ -136,4 +136,4 @@ saved_rbx:		.quad	0
 saved_rip:		.quad	0
 saved_rsp:		.quad	0
 
-ENTRY(saved_magic)	.quad	0
+SYM_DATA(saved_magic,	.quad	0)
Signature · 1 line
2.23.0
merge bot Applied
#5 lore raw

[tip: x86/asm] x86/asm/suspend: Use SYM_DATA for data

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     37503f734e9de314c4e9a1eba33e9e7d8ec80839
Gitweb:        https://git.kernel.org/tip/37503f734e9de314c4e9a1eba33e9e7d8ec80839
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:42 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 09:50:25 +02:00

x86/asm/suspend: Use SYM_DATA for data

Some global data in the suspend code were marked as `ENTRY'. ENTRY was intended for functions and shall be paired with ENDPROC. ENTRY also aligns symbols to 16 bytes which creates unnecessary holes.

Note that:

* saved_magic (long) in wakeup_32 is still prepended by section's ALIGN
* saved_magic (quad) in wakeup_64 follows a bunch of quads which are aligned (but need not be aligned to 16)

Since historical markings are being dropped, make proper use of newly added SYM_DATA in this code.

---
 arch/x86/kernel/acpi/wakeup_32.S | 2 +-
 arch/x86/kernel/acpi/wakeup_64.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/acpi/wakeup_32.S +1 -1
index e95e959..4272492 100644
@@ -90,7 +90,7 @@ ret_point:
 
 .data
 ALIGN
-ENTRY(saved_magic)	.long	0
+SYM_DATA(saved_magic,	.long 0)
 saved_eip:		.long 0
 
 # saved registers
arch/x86/kernel/acpi/wakeup_64.S +1 -1
index 7f9ade1..462a20f 100644
@@ -136,4 +136,4 @@ saved_rbx:		.quad	0
 saved_rip:		.quad	0
 saved_rsp:		.quad	0
 
-ENTRY(saved_magic)	.quad	0
+SYM_DATA(saved_magic,	.quad	0)
author
#6 lore raw

PATCH v9 3/28 x86/asm: Annotate relocate_kernel_{32,64}.c

In reply to Jiri Slaby

There are functions in relocate_kernel_{32,64}.c which are not annotated. This makes automatic works on them rather hard. So annotate all the functions now.

Note that these are not C-like functions, so FUNC is not used. Instead CODE markers are used. Also the functions are not aligned, so the NOALIGN versions are used:
- SYM_CODE_START_NOALIGN
- SYM_CODE_START_LOCAL_NOALIGN
- SYM_CODE_END

In return, we get:

  0000   108 NOTYPE  GLOBAL DEFAULT    1 relocate_kernel
  006c   165 NOTYPE  LOCAL  DEFAULT    1 identity_mapped
  0146   127 NOTYPE  LOCAL  DEFAULT    1 swap_pages
  0111    53 NOTYPE  LOCAL  DEFAULT    1 virtual_mapped
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/kernel/relocate_kernel_32.S | 13 ++++++++-----
 arch/x86/kernel/relocate_kernel_64.S | 13 ++++++++-----
 2 files changed, 16 insertions(+), 10 deletions(-)
arch/x86/kernel/relocate_kernel_32.S +8 -5
index ee26df08002e..94b33885f8d2 100644
@@ -35,8 +35,7 @@
 #define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
 
 	.text
-	.globl relocate_kernel
-relocate_kernel:
+SYM_CODE_START_NOALIGN(relocate_kernel)
 	/* Save the CPU context, used for jumping back */
 
 	pushl	%ebx
@@ -93,8 +92,9 @@ relocate_kernel:
 	addl    $(identity_mapped - relocate_kernel), %eax
 	pushl   %eax
 	ret
+SYM_CODE_END(relocate_kernel)
 
-identity_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
 	/* set return address to 0 if not preserving context */
 	pushl	$0
 	/* store the start address on the stack */
@@ -191,8 +191,9 @@ identity_mapped:
 	addl	$(virtual_mapped - relocate_kernel), %eax
 	pushl	%eax
 	ret
+SYM_CODE_END(identity_mapped)
 
-virtual_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
 	movl	CR4(%edi), %eax
 	movl	%eax, %cr4
 	movl	CR3(%edi), %eax
@@ -208,9 +209,10 @@ virtual_mapped:
 	popl	%esi
 	popl	%ebx
 	ret
+SYM_CODE_END(virtual_mapped)
 
 	/* Do the copies */
-swap_pages:
+SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
 	movl	8(%esp), %edx
 	movl	4(%esp), %ecx
 	pushl	%ebp
@@ -270,6 +272,7 @@ swap_pages:
 	popl	%ebx
 	popl	%ebp
 	ret
+SYM_CODE_END(swap_pages)
 
 	.globl kexec_control_code_size
 .set kexec_control_code_size, . - relocate_kernel
arch/x86/kernel/relocate_kernel_64.S +8 -5
index c51ccff5cd01..ef3ba99068d3 100644
@@ -38,8 +38,7 @@
 	.text
 	.align PAGE_SIZE
 	.code64
-	.globl relocate_kernel
-relocate_kernel:
+SYM_CODE_START_NOALIGN(relocate_kernel)
 	/*
 	 * %rdi indirection_page
 	 * %rsi page_list
@@ -103,8 +102,9 @@ relocate_kernel:
 	addq	$(identity_mapped - relocate_kernel), %r8
 	pushq	%r8
 	ret
+SYM_CODE_END(relocate_kernel)
 
-identity_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
 	/* set return address to 0 if not preserving context */
 	pushq	$0
 	/* store the start address on the stack */
@@ -209,8 +209,9 @@ identity_mapped:
 	movq	$virtual_mapped, %rax
 	pushq	%rax
 	ret
+SYM_CODE_END(identity_mapped)
 
-virtual_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
 	movq	RSP(%r8), %rsp
 	movq	CR4(%r8), %rax
 	movq	%rax, %cr4
@@ -228,9 +229,10 @@ virtual_mapped:
 	popq	%rbp
 	popq	%rbx
 	ret
+SYM_CODE_END(virtual_mapped)
 
 	/* Do the copies */
-swap_pages:
+SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
 	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
 	xorl	%edi, %edi
 	xorl	%esi, %esi
@@ -283,6 +285,7 @@ swap_pages:
 	jmp	0b
 3:
 	ret
+SYM_CODE_END(swap_pages)
 
 	.globl kexec_control_code_size
 .set kexec_control_code_size, . - relocate_kernel
Signature · 1 line
2.23.0
maintainer
#7 lore raw

Re: [PATCH v9 03/28] x86/asm: Annotate relocate_kernel_{32,64}.c

Quoted 2 lines · Jiri Slaby

There are functions in relocate_kernel_{32,64}.c which are not annotated. This makes automatic works on them rather hard. So annotate

Restoring from the previous version: s/works/annotations/

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
merge bot Applied
#8 lore raw

[tip: x86/asm] x86/asm: Annotate relocate_kernel_{32,64}.c

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     6ec2a968247e51535e08dbbbfc8f53c95a48cde0
Gitweb:        https://git.kernel.org/tip/6ec2a968247e51535e08dbbbfc8f53c95a48cde0
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:43 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 09:53:19 +02:00

x86/asm: Annotate relocate_kernel_{32,64}.c

There are functions in relocate_kernel_{32,64}.c which are not annotated. This makes automatic annotations on them rather hard. So annotate all the functions now.

Note that these are not C-like functions, so FUNC is not used. Instead CODE markers are used. Also the functions are not aligned, so the NOALIGN versions are used:

- SYM_CODE_START_NOALIGN
- SYM_CODE_START_LOCAL_NOALIGN
- SYM_CODE_END

The result is:

  0000   108 NOTYPE  GLOBAL DEFAULT    1 relocate_kernel
  006c   165 NOTYPE  LOCAL  DEFAULT    1 identity_mapped
  0146   127 NOTYPE  LOCAL  DEFAULT    1 swap_pages
  0111    53 NOTYPE  LOCAL  DEFAULT    1 virtual_mapped
Cc Alexios Zavras <[email protected]>
Cc Allison Randal <[email protected]>
Cc Enrico Weigelt <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/kernel/relocate_kernel_32.S | 13 ++++++++-----
 arch/x86/kernel/relocate_kernel_64.S | 13 ++++++++-----
 2 files changed, 16 insertions(+), 10 deletions(-)
arch/x86/kernel/relocate_kernel_32.S +8 -5
index ee26df0..94b3388 100644
@@ -35,8 +35,7 @@
 #define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
 
 	.text
-	.globl relocate_kernel
-relocate_kernel:
+SYM_CODE_START_NOALIGN(relocate_kernel)
 	/* Save the CPU context, used for jumping back */
 
 	pushl	%ebx
@@ -93,8 +92,9 @@ relocate_kernel:
 	addl    $(identity_mapped - relocate_kernel), %eax
 	pushl   %eax
 	ret
+SYM_CODE_END(relocate_kernel)
 
-identity_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
 	/* set return address to 0 if not preserving context */
 	pushl	$0
 	/* store the start address on the stack */
@@ -191,8 +191,9 @@ identity_mapped:
 	addl	$(virtual_mapped - relocate_kernel), %eax
 	pushl	%eax
 	ret
+SYM_CODE_END(identity_mapped)
 
-virtual_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
 	movl	CR4(%edi), %eax
 	movl	%eax, %cr4
 	movl	CR3(%edi), %eax
@@ -208,9 +209,10 @@ virtual_mapped:
 	popl	%esi
 	popl	%ebx
 	ret
+SYM_CODE_END(virtual_mapped)
 
 	/* Do the copies */
-swap_pages:
+SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
 	movl	8(%esp), %edx
 	movl	4(%esp), %ecx
 	pushl	%ebp
@@ -270,6 +272,7 @@ swap_pages:
 	popl	%ebx
 	popl	%ebp
 	ret
+SYM_CODE_END(swap_pages)
 
 	.globl kexec_control_code_size
 .set kexec_control_code_size, . - relocate_kernel
arch/x86/kernel/relocate_kernel_64.S +8 -5
index c51ccff..ef3ba99 100644
@@ -38,8 +38,7 @@
 	.text
 	.align PAGE_SIZE
 	.code64
-	.globl relocate_kernel
-relocate_kernel:
+SYM_CODE_START_NOALIGN(relocate_kernel)
 	/*
 	 * %rdi indirection_page
 	 * %rsi page_list
@@ -103,8 +102,9 @@ relocate_kernel:
 	addq	$(identity_mapped - relocate_kernel), %r8
 	pushq	%r8
 	ret
+SYM_CODE_END(relocate_kernel)
 
-identity_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
 	/* set return address to 0 if not preserving context */
 	pushq	$0
 	/* store the start address on the stack */
@@ -209,8 +209,9 @@ identity_mapped:
 	movq	$virtual_mapped, %rax
 	pushq	%rax
 	ret
+SYM_CODE_END(identity_mapped)
 
-virtual_mapped:
+SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
 	movq	RSP(%r8), %rsp
 	movq	CR4(%r8), %rax
 	movq	%rax, %cr4
@@ -228,9 +229,10 @@ virtual_mapped:
 	popq	%rbp
 	popq	%rbx
 	ret
+SYM_CODE_END(virtual_mapped)
 
 	/* Do the copies */
-swap_pages:
+SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
 	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
 	xorl	%edi, %edi
 	xorl	%esi, %esi
@@ -283,6 +285,7 @@ swap_pages:
 	jmp	0b
 3:
 	ret
+SYM_CODE_END(swap_pages)
 
 	.globl kexec_control_code_size
 .set kexec_control_code_size, . - relocate_kernel
author
#9 lore raw

PATCH v9 4/28 x86/asm/entry: Annotate THUNKs

In reply to Jiri Slaby

Place SYM_*_START_NOALIGN and SYM_*_END around the THUNK macro body. Preserve @function by FUNC (64bit) and CODE (32bit). Given it was not marked as aligned, use NOALIGN.

The result:

 Value  Size Type    Bind   Vis      Ndx Name
  0000    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_on_thunk
  001c    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_off_thunk
  0038    24 FUNC    GLOBAL DEFAULT    1 lockdep_sys_exit_thunk
  0050    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule
  0068    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule_notra

The annotation of .L_restore does not generate anything to the code (at the moment). Here, it just serves documentation purposes (as opening and closing brackets of functions).

Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Andy Lutomirski <[email protected]>
---
 arch/x86/entry/thunk_32.S | 4 ++--
 arch/x86/entry/thunk_64.S | 7 ++++---
 2 files changed, 6 insertions(+), 5 deletions(-)
arch/x86/entry/thunk_32.S +2 -2
index 2713490611a3..e010d4ae11f1 100644
@@ -10,8 +10,7 @@
 
 	/* put return address in eax (arg1) */
 	.macro THUNK name, func, put_ret_addr_in_eax=0
-	.globl \name
-\name:
+SYM_CODE_START_NOALIGN(\name)
 	pushl %eax
 	pushl %ecx
 	pushl %edx
@@ -27,6 +26,7 @@
 	popl %eax
 	ret
 	_ASM_NOKPROBE(\name)
+SYM_CODE_END(\name)
 	.endm
 
 #ifdef CONFIG_TRACE_IRQFLAGS
arch/x86/entry/thunk_64.S +4 -3
index ea5c4167086c..c5c3b6e86e62 100644
@@ -12,7 +12,7 @@
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
-	ENTRY(\name)
+SYM_FUNC_START_NOALIGN(\name)
 	pushq %rbp
 	movq %rsp, %rbp
 
@@ -33,7 +33,7 @@
 
 	call \func
 	jmp  .L_restore
-	ENDPROC(\name)
+SYM_FUNC_END(\name)
 	_ASM_NOKPROBE(\name)
 	.endm
 
@@ -56,7 +56,7 @@
 #if defined(CONFIG_TRACE_IRQFLAGS) \
  || defined(CONFIG_DEBUG_LOCK_ALLOC) \
  || defined(CONFIG_PREEMPTION)
-.L_restore:
+SYM_CODE_START_LOCAL_NOALIGN(.L_restore)
 	popq %r11
 	popq %r10
 	popq %r9
@@ -69,4 +69,5 @@
 	popq %rbp
 	ret
 	_ASM_NOKPROBE(.L_restore)
+SYM_CODE_END(.L_restore)
 #endif
Signature · 1 line
2.23.0
maintainer
#10 lore raw

Re: [PATCH v9 04/28] x86/asm/entry: Annotate THUNKs

Quoted 3 lines · Jiri Slaby

Place SYM_*_START_NOALIGN and SYM_*_END around the THUNK macro body. Preserve @function by FUNC (64bit) and CODE (32bit). Given it was not marked as aligned, use NOALIGN.

Yeah, I guess the NOALIGN is causing some relaxing of alignment because the symbols all "move up", from looking at the addresses:

before:

$ readelf -a vmlinux | grep -E "\W(trace_hardirqs_o(n|ff)_thunk|lockdep_sys_exit_thunk|___preempt_schedule)"
 70007: ffffffff81001c60    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_off_thunk
 78467: ffffffff81001c40    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_on_thunk
 82067: ffffffff81001cc0    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule_notra
 86509: ffffffff81001c80    24 FUNC    GLOBAL DEFAULT    1 lockdep_sys_exit_thunk
 87594: ffffffff81001ca0    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule

after:

$ readelf -a vmlinux | grep -E "\W(trace_hardirqs_o(n|ff)_thunk|lockdep_sys_exit_thunk|___preempt_schedule)"
 70007: ffffffff81001c50    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_off_thunk
 78467: ffffffff81001c34    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_on_thunk
 82067: ffffffff81001c9c    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule_notra
 86509: ffffffff81001c6c    24 FUNC    GLOBAL DEFAULT    1 lockdep_sys_exit_thunk
 87594: ffffffff81001c84    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule
Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
merge bot Applied
#11 lore raw

[tip: x86/asm] x86/asm/entry: Annotate THUNKs

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     76dc6d600166de2c0482db95318534e6dc284212
Gitweb:        https://git.kernel.org/tip/76dc6d600166de2c0482db95318534e6dc284212
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:44 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 09:58:59 +02:00

x86/asm/entry: Annotate THUNKs

Place SYM_*_START_NOALIGN and SYM_*_END around the THUNK macro body. Preserve @function by FUNC (64bit) and CODE (32bit). Given it was not marked as aligned, use NOALIGN.

The result:

 Value  Size Type    Bind   Vis      Ndx Name
  0000    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_on_thunk
  001c    28 FUNC    GLOBAL DEFAULT    1 trace_hardirqs_off_thunk
  0038    24 FUNC    GLOBAL DEFAULT    1 lockdep_sys_exit_thunk
  0050    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule
  0068    24 FUNC    GLOBAL DEFAULT    1 ___preempt_schedule_notra

The annotation of .L_restore does not generate anything (at the moment). Here, it just serves documentation purposes (as opening and closing brackets of functions).

---
 arch/x86/entry/thunk_32.S | 4 ++--
 arch/x86/entry/thunk_64.S | 7 ++++---
 2 files changed, 6 insertions(+), 5 deletions(-)
arch/x86/entry/thunk_32.S +2 -2
index 2713490..e010d4a 100644
@@ -10,8 +10,7 @@
 
 	/* put return address in eax (arg1) */
 	.macro THUNK name, func, put_ret_addr_in_eax=0
-	.globl \name
-\name:
+SYM_CODE_START_NOALIGN(\name)
 	pushl %eax
 	pushl %ecx
 	pushl %edx
@@ -27,6 +26,7 @@
 	popl %eax
 	ret
 	_ASM_NOKPROBE(\name)
+SYM_CODE_END(\name)
 	.endm
 
 #ifdef CONFIG_TRACE_IRQFLAGS
arch/x86/entry/thunk_64.S +4 -3
index ea5c416..c5c3b6e 100644
@@ -12,7 +12,7 @@
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
-	ENTRY(\name)
+SYM_FUNC_START_NOALIGN(\name)
 	pushq %rbp
 	movq %rsp, %rbp
 
@@ -33,7 +33,7 @@
 
 	call \func
 	jmp  .L_restore
-	ENDPROC(\name)
+SYM_FUNC_END(\name)
 	_ASM_NOKPROBE(\name)
 	.endm
 
@@ -56,7 +56,7 @@
 #if defined(CONFIG_TRACE_IRQFLAGS) \
  || defined(CONFIG_DEBUG_LOCK_ALLOC) \
  || defined(CONFIG_PREEMPTION)
-.L_restore:
+SYM_CODE_START_LOCAL_NOALIGN(.L_restore)
 	popq %r11
 	popq %r10
 	popq %r9
@@ -69,4 +69,5 @@
 	popq %rbp
 	ret
 	_ASM_NOKPROBE(.L_restore)
+SYM_CODE_END(.L_restore)
 #endif
author
#12 lore raw

PATCH v9 5/28 x86/asm: Annotate local pseudo-functions

In reply to Jiri Slaby

Use the newly added SYM_CODE_START_LOCAL* to annotate starts of all pseudo-functions (those ending END until now) which do not have ".globl" annotation. This is needed to balance END for tools that generate debuginfo. Note that ENDs are switched to SYM_CODE_END too so that everybody can see the pairing.

C-like functions (which handle frame ptr etc.) are not annotated here, hence SYM_CODE_* macros are used here, not SYM_FUNC_*. Note that 32bit early_idt_handler_common already had ENDPROC -- switch that to SYM_CODE_END for the same reason as above (and to be the same as 64bit).

While early_idt_handler_common is LOCAL, it is not named starting ".L" as it happens to appear in call traces.

bad_get_user*, and bad_put_user are now aligned, as they are separate functions. They do not mind to be aligned -- no need to be compact there.

early_idt_handler_common is aligned now too, as it is after early_idt_handler_array, so as well no need to be compact there.

verify_cpu is self-standing and included in other .S files, so align it too.

The others have alignment preserved to what it used to be (using the _NOALIGN variant of macros).

Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Andy Lutomirski <[email protected]>

---

Notes:
[v3] annotate more functions
[v4] describe the alignments changes

 arch/x86/entry/entry_64.S    | 3 ++-
 arch/x86/kernel/head_32.S    | 4 ++--
 arch/x86/kernel/head_64.S    | 4 ++--
 arch/x86/kernel/verify_cpu.S | 4 ++--
 arch/x86/lib/getuser.S       | 6 ++++--
 arch/x86/lib/putuser.S       | 3 ++-
 6 files changed, 14 insertions(+), 10 deletions(-)
arch/x86/entry/entry_64.S +2 -1
index 86cbb22208c8..db43526cecfa 100644
@@ -1061,7 +1061,7 @@ EXPORT_SYMBOL(native_load_gs_index)
 	_ASM_EXTABLE(.Lgs_change, .Lbad_gs)
 	.section .fixup, "ax"
 	/* running with kernelgs */
-.Lbad_gs:
+SYM_CODE_START_LOCAL_NOALIGN(.Lbad_gs)
 	SWAPGS					/* switch back to user gs */
 .macro ZAP_GS
 	/* This can't be a string because the preprocessor needs to see it. */
@@ -1072,6 +1072,7 @@ EXPORT_SYMBOL(native_load_gs_index)
 	xorl	%eax, %eax
 	movl	%eax, %gs
 	jmp	2b
+SYM_CODE_END(.Lbad_gs)
 	.previous
 
 /* Call softirq on interrupt stack. Interrupts are off. */
arch/x86/kernel/head_32.S +2 -2
index 7feb953e10d2..aec1fdb80221 100644
@@ -409,7 +409,7 @@ ENTRY(early_idt_handler_array)
 	.endr
 ENDPROC(early_idt_handler_array)
 	
-early_idt_handler_common:
+SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
 	 * The stack is the hardware frame, an error code or zero, and the
 	 * vector number.
@@ -460,7 +460,7 @@ early_idt_handler_common:
 	decl	%ss:early_recursion_flag
 	addl	$4, %esp	/* pop pt_regs->orig_ax */
 	iret
-ENDPROC(early_idt_handler_common)
+SYM_CODE_END(early_idt_handler_common)
 
 /* This is the default interrupt "handler" :-) */
 ENTRY(early_ignore_irq)
arch/x86/kernel/head_64.S +2 -2
index f00d7c0c1c86..5b42552d929f 100644
@@ -291,7 +291,7 @@ ENTRY(early_idt_handler_array)
 	UNWIND_HINT_IRET_REGS offset=16
 END(early_idt_handler_array)
 
-early_idt_handler_common:
+SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
 	 * The stack is the hardware frame, an error code or zero, and the
 	 * vector number.
@@ -333,7 +333,7 @@ early_idt_handler_common:
 20:
 	decl early_recursion_flag(%rip)
 	jmp restore_regs_and_return_to_kernel
-END(early_idt_handler_common)
+SYM_CODE_END(early_idt_handler_common)
 
 #define NEXT_PAGE(name) \
 	.balign	PAGE_SIZE; \
arch/x86/kernel/verify_cpu.S +2 -2
index a024c4f7ba56..641f0fe1e5b4 100644
@@ -31,7 +31,7 @@
 #include <asm/cpufeatures.h>
 #include <asm/msr-index.h>
 
-ENTRY(verify_cpu)
+SYM_FUNC_START_LOCAL(verify_cpu)
 	pushf				# Save caller passed flags
 	push	$0			# Kill any dangerous flags
 	popf
@@ -137,4 +137,4 @@ ENTRY(verify_cpu)
 	popf				# Restore caller passed flags
 	xorl %eax, %eax
 	ret
-ENDPROC(verify_cpu)
+SYM_FUNC_END(verify_cpu)
arch/x86/lib/getuser.S +4 -2
index 9578eb88fc87..f9f59eb85635 100644
@@ -115,21 +115,23 @@ ENDPROC(__get_user_8)
 EXPORT_SYMBOL(__get_user_8)
 
 
-.Lbad_get_user_clac:
+SYM_CODE_START_LOCAL(.Lbad_get_user_clac)
 	ASM_CLAC
 bad_get_user:
 	xor %edx,%edx
 	mov $(-EFAULT),%_ASM_AX
 	ret
+SYM_CODE_END(.Lbad_get_user_clac)
 
 #ifdef CONFIG_X86_32
-.Lbad_get_user_8_clac:
+SYM_CODE_START_LOCAL(.Lbad_get_user_8_clac)
 	ASM_CLAC
 bad_get_user_8:
 	xor %edx,%edx
 	xor %ecx,%ecx
 	mov $(-EFAULT),%_ASM_AX
 	ret
+SYM_CODE_END(.Lbad_get_user_8_clac)
 #endif
 
 	_ASM_EXTABLE_UA(1b, .Lbad_get_user_clac)
arch/x86/lib/putuser.S +2 -1
index 126dd6a9ec9b..a9391d772c81 100644
@@ -91,11 +91,12 @@ ENTRY(__put_user_8)
 ENDPROC(__put_user_8)
 EXPORT_SYMBOL(__put_user_8)
 
-.Lbad_put_user_clac:
+SYM_CODE_START_LOCAL(.Lbad_put_user_clac)
 	ASM_CLAC
 .Lbad_put_user:
 	movl $-EFAULT,%eax
 	RET
+SYM_CODE_END(.Lbad_put_user_clac)
 
 	_ASM_EXTABLE_UA(1b, .Lbad_put_user_clac)
 	_ASM_EXTABLE_UA(2b, .Lbad_put_user_clac)
Signature · 1 line
2.23.0
merge bot Applied
#13 lore raw

[tip: x86/asm] x86/asm: Annotate local pseudo-functions

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     ef77e6880be8fa3033544109e29417c8710fd3f2
Gitweb:        https://git.kernel.org/tip/ef77e6880be8fa3033544109e29417c8710fd3f2
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:45 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:04:04 +02:00

x86/asm: Annotate local pseudo-functions

Use the newly added SYM_CODE_START_LOCAL* to annotate beginnings of all pseudo-functions (those ending with END until now) which do not have ".globl" annotation. This is needed to balance END for tools that generate debuginfo. Note that ENDs are switched to SYM_CODE_END too so that everybody can see the pairing.

C-like functions (which handle frame ptr etc.) are not annotated here, hence SYM_CODE_* macros are used here, not SYM_FUNC_*. Note that the 32bit version of early_idt_handler_common already had ENDPROC -- switch that to SYM_CODE_END for the same reason as above (and to be the same as 64bit).

While early_idt_handler_common is LOCAL, it's name is not prepended with ".L" as it happens to appear in call traces.

bad_get_user*, and bad_put_user are now aligned, as they are separate functions. They do not mind to be aligned -- no need to be compact there.

early_idt_handler_common is aligned now too, as it is after early_idt_handler_array, so as well no need to be compact there.

verify_cpu is self-standing and included in other .S files, so align it too.

The others have alignment preserved to what it used to be (using the _NOALIGN variant of macros).

Cc Alexios Zavras <[email protected]>
Cc Allison Randal <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Cao jin <[email protected]>
Cc Enrico Weigelt <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Maran Wilson <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/entry/entry_64.S    | 3 ++-
 arch/x86/kernel/head_32.S    | 4 ++--
 arch/x86/kernel/head_64.S    | 4 ++--
 arch/x86/kernel/verify_cpu.S | 4 ++--
 arch/x86/lib/getuser.S       | 6 ++++--
 arch/x86/lib/putuser.S       | 3 ++-
 6 files changed, 14 insertions(+), 10 deletions(-)
arch/x86/entry/entry_64.S +2 -1
index 86cbb22..db43526 100644
@@ -1061,7 +1061,7 @@ EXPORT_SYMBOL(native_load_gs_index)
 	_ASM_EXTABLE(.Lgs_change, .Lbad_gs)
 	.section .fixup, "ax"
 	/* running with kernelgs */
-.Lbad_gs:
+SYM_CODE_START_LOCAL_NOALIGN(.Lbad_gs)
 	SWAPGS					/* switch back to user gs */
 .macro ZAP_GS
 	/* This can't be a string because the preprocessor needs to see it. */
@@ -1072,6 +1072,7 @@ EXPORT_SYMBOL(native_load_gs_index)
 	xorl	%eax, %eax
 	movl	%eax, %gs
 	jmp	2b
+SYM_CODE_END(.Lbad_gs)
 	.previous
 
 /* Call softirq on interrupt stack. Interrupts are off. */
arch/x86/kernel/head_32.S +2 -2
index 7feb953..aec1fdb 100644
@@ -409,7 +409,7 @@ ENTRY(early_idt_handler_array)
 	.endr
 ENDPROC(early_idt_handler_array)
 	
-early_idt_handler_common:
+SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
 	 * The stack is the hardware frame, an error code or zero, and the
 	 * vector number.
@@ -460,7 +460,7 @@ early_idt_handler_common:
 	decl	%ss:early_recursion_flag
 	addl	$4, %esp	/* pop pt_regs->orig_ax */
 	iret
-ENDPROC(early_idt_handler_common)
+SYM_CODE_END(early_idt_handler_common)
 
 /* This is the default interrupt "handler" :-) */
 ENTRY(early_ignore_irq)
arch/x86/kernel/head_64.S +2 -2
index f00d7c0..5b42552 100644
@@ -291,7 +291,7 @@ ENTRY(early_idt_handler_array)
 	UNWIND_HINT_IRET_REGS offset=16
 END(early_idt_handler_array)
 
-early_idt_handler_common:
+SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
 	 * The stack is the hardware frame, an error code or zero, and the
 	 * vector number.
@@ -333,7 +333,7 @@ early_idt_handler_common:
 20:
 	decl early_recursion_flag(%rip)
 	jmp restore_regs_and_return_to_kernel
-END(early_idt_handler_common)
+SYM_CODE_END(early_idt_handler_common)
 
 #define NEXT_PAGE(name) \
 	.balign	PAGE_SIZE; \
arch/x86/kernel/verify_cpu.S +2 -2
index a024c4f..641f0fe 100644
@@ -31,7 +31,7 @@
 #include <asm/cpufeatures.h>
 #include <asm/msr-index.h>
 
-ENTRY(verify_cpu)
+SYM_FUNC_START_LOCAL(verify_cpu)
 	pushf				# Save caller passed flags
 	push	$0			# Kill any dangerous flags
 	popf
@@ -137,4 +137,4 @@ ENTRY(verify_cpu)
 	popf				# Restore caller passed flags
 	xorl %eax, %eax
 	ret
-ENDPROC(verify_cpu)
+SYM_FUNC_END(verify_cpu)
arch/x86/lib/getuser.S +4 -2
index 9578eb8..f9f59eb 100644
@@ -115,21 +115,23 @@ ENDPROC(__get_user_8)
 EXPORT_SYMBOL(__get_user_8)
 
 
-.Lbad_get_user_clac:
+SYM_CODE_START_LOCAL(.Lbad_get_user_clac)
 	ASM_CLAC
 bad_get_user:
 	xor %edx,%edx
 	mov $(-EFAULT),%_ASM_AX
 	ret
+SYM_CODE_END(.Lbad_get_user_clac)
 
 #ifdef CONFIG_X86_32
-.Lbad_get_user_8_clac:
+SYM_CODE_START_LOCAL(.Lbad_get_user_8_clac)
 	ASM_CLAC
 bad_get_user_8:
 	xor %edx,%edx
 	xor %ecx,%ecx
 	mov $(-EFAULT),%_ASM_AX
 	ret
+SYM_CODE_END(.Lbad_get_user_8_clac)
 #endif
 
 	_ASM_EXTABLE_UA(1b, .Lbad_get_user_clac)
arch/x86/lib/putuser.S +2 -1
index 126dd6a..a9391d7 100644
@@ -91,11 +91,12 @@ ENTRY(__put_user_8)
 ENDPROC(__put_user_8)
 EXPORT_SYMBOL(__put_user_8)
 
-.Lbad_put_user_clac:
+SYM_CODE_START_LOCAL(.Lbad_put_user_clac)
 	ASM_CLAC
 .Lbad_put_user:
 	movl $-EFAULT,%eax
 	RET
+SYM_CODE_END(.Lbad_put_user_clac)
 
 	_ASM_EXTABLE_UA(1b, .Lbad_put_user_clac)
 	_ASM_EXTABLE_UA(2b, .Lbad_put_user_clac)
author
#14 lore raw

PATCH v9 6/28 x86/asm/crypto: Annotate local functions

In reply to Jiri Slaby

Use the newly added SYM_FUNC_START_LOCAL to annotate starts of all functions which do not have ".globl" annotation, but their ends are annotated by ENDPROC. This is needed to balance ENDPROC for tools that generate debuginfo.

These fucntions are not prepended with ".L" as they might appear in call traces and they wouldn't be visible after such change.

To be symmetric, the functions' ENDPROCs are converted to the new SYM_FUNC_END.

Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/crypto/aegis128-aesni-asm.S         |  8 ++--
 arch/x86/crypto/aesni-intel_asm.S            | 49 ++++++++------------
 arch/x86/crypto/camellia-aesni-avx-asm_64.S  | 20 ++++----
 arch/x86/crypto/camellia-aesni-avx2-asm_64.S | 20 ++++----
 arch/x86/crypto/cast5-avx-x86_64-asm_64.S    |  8 ++--
 arch/x86/crypto/cast6-avx-x86_64-asm_64.S    |  8 ++--
 arch/x86/crypto/chacha-ssse3-x86_64.S        |  4 +-
 arch/x86/crypto/ghash-clmulni-intel_asm.S    |  4 +-
 arch/x86/crypto/serpent-avx-x86_64-asm_64.S  |  8 ++--
 arch/x86/crypto/serpent-avx2-asm_64.S        |  8 ++--
 arch/x86/crypto/twofish-avx-x86_64-asm_64.S  |  8 ++--
 11 files changed, 68 insertions(+), 77 deletions(-)
arch/x86/crypto/aegis128-aesni-asm.S +4 -4
index 4434607e366d..b7026fdef4ff 100644
@@ -71,7 +71,7 @@
  *   %r8
  *   %r9
  */
-__load_partial:
+SYM_FUNC_START_LOCAL(__load_partial)
 	xor %r9d, %r9d
 	pxor MSG, MSG
 
@@ -123,7 +123,7 @@ __load_partial:
 
 .Lld_partial_8:
 	ret
-ENDPROC(__load_partial)
+SYM_FUNC_END(__load_partial)
 
 /*
  * __store_partial: internal ABI
@@ -137,7 +137,7 @@ ENDPROC(__load_partial)
  *   %r9
  *   %r10
  */
-__store_partial:
+SYM_FUNC_START_LOCAL(__store_partial)
 	mov LEN, %r8
 	mov DST, %r9
 
@@ -181,7 +181,7 @@ __store_partial:
 
 .Lst_partial_1:
 	ret
-ENDPROC(__store_partial)
+SYM_FUNC_END(__store_partial)
 
 /*
  * void crypto_aegis128_aesni_init(void *state, const void *key, const void *iv);
arch/x86/crypto/aesni-intel_asm.S +20 -29

154 lines not on this page · raw message

arch/x86/crypto/camellia-aesni-avx-asm_64.S +10 -10
index a14af6eb09cb..f4408ca55fdb 100644
@@ -189,20 +189,20 @@
  * larger and would only be 0.5% faster (on sandy-bridge).
  */
 .align 8
-roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd:
+SYM_FUNC_START_LOCAL(roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 	roundsm16(%xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
 		  %xmm8, %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm15,
 		  %rcx, (%r9));
 	ret;
-ENDPROC(roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
+SYM_FUNC_END(roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 
 .align 8
-roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab:
+SYM_FUNC_START_LOCAL(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	roundsm16(%xmm4, %xmm5, %xmm6, %xmm7, %xmm0, %xmm1, %xmm2, %xmm3,
 		  %xmm12, %xmm13, %xmm14, %xmm15, %xmm8, %xmm9, %xmm10, %xmm11,
 		  %rax, (%r9));
 	ret;
-ENDPROC(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
+SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 
 /*
  * IN/OUT:
@@ -722,7 +722,7 @@ ENDPROC(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 .text
 
 .align 8
-__camellia_enc_blk16:
+SYM_FUNC_START_LOCAL(__camellia_enc_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 256 bytes
@@ -806,10 +806,10 @@ __camellia_enc_blk16:
 		     %xmm15, %rax, %rcx, 24);
 
 	jmp .Lenc_done;
-ENDPROC(__camellia_enc_blk16)
+SYM_FUNC_END(__camellia_enc_blk16)
 
 .align 8
-__camellia_dec_blk16:
+SYM_FUNC_START_LOCAL(__camellia_dec_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 256 bytes
@@ -891,7 +891,7 @@ __camellia_dec_blk16:
 	      ((key_table + (24) * 8) + 4)(CTX));
 
 	jmp .Ldec_max24;
-ENDPROC(__camellia_dec_blk16)
+SYM_FUNC_END(__camellia_dec_blk16)
 
 ENTRY(camellia_ecb_enc_16way)
 	/* input:
@@ -1120,7 +1120,7 @@ ENDPROC(camellia_ctr_16way)
 	vpxor tmp, iv, iv;
 
 .align 8
-camellia_xts_crypt_16way:
+SYM_FUNC_START_LOCAL(camellia_xts_crypt_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -1254,7 +1254,7 @@ camellia_xts_crypt_16way:
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_xts_crypt_16way)
+SYM_FUNC_END(camellia_xts_crypt_16way)
 
 ENTRY(camellia_xts_enc_16way)
 	/* input:
arch/x86/crypto/camellia-aesni-avx2-asm_64.S +10 -10
index 4be4c7c3ba27..72ae3edd0997 100644
@@ -223,20 +223,20 @@
  * larger and would only marginally faster.
  */
 .align 8
-roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd:
+SYM_FUNC_START_LOCAL(roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 	roundsm32(%ymm0, %ymm1, %ymm2, %ymm3, %ymm4, %ymm5, %ymm6, %ymm7,
 		  %ymm8, %ymm9, %ymm10, %ymm11, %ymm12, %ymm13, %ymm14, %ymm15,
 		  %rcx, (%r9));
 	ret;
-ENDPROC(roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
+SYM_FUNC_END(roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 
 .align 8
-roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab:
+SYM_FUNC_START_LOCAL(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	roundsm32(%ymm4, %ymm5, %ymm6, %ymm7, %ymm0, %ymm1, %ymm2, %ymm3,
 		  %ymm12, %ymm13, %ymm14, %ymm15, %ymm8, %ymm9, %ymm10, %ymm11,
 		  %rax, (%r9));
 	ret;
-ENDPROC(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
+SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 
 /*
  * IN/OUT:
@@ -760,7 +760,7 @@ ENDPROC(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 .text
 
 .align 8
-__camellia_enc_blk32:
+SYM_FUNC_START_LOCAL(__camellia_enc_blk32)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 512 bytes
@@ -844,10 +844,10 @@ __camellia_enc_blk32:
 		     %ymm15, %rax, %rcx, 24);
 
 	jmp .Lenc_done;
-ENDPROC(__camellia_enc_blk32)
+SYM_FUNC_END(__camellia_enc_blk32)
 
 .align 8
-__camellia_dec_blk32:
+SYM_FUNC_START_LOCAL(__camellia_dec_blk32)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 512 bytes
@@ -929,7 +929,7 @@ __camellia_dec_blk32:
 	      ((key_table + (24) * 8) + 4)(CTX));
 
 	jmp .Ldec_max24;
-ENDPROC(__camellia_dec_blk32)
+SYM_FUNC_END(__camellia_dec_blk32)
 
 ENTRY(camellia_ecb_enc_32way)
 	/* input:
@@ -1222,7 +1222,7 @@ ENDPROC(camellia_ctr_32way)
 	vpxor tmp1, iv, iv;
 
 .align 8
-camellia_xts_crypt_32way:
+SYM_FUNC_START_LOCAL(camellia_xts_crypt_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -1367,7 +1367,7 @@ camellia_xts_crypt_32way:
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_xts_crypt_32way)
+SYM_FUNC_END(camellia_xts_crypt_32way)
 
 ENTRY(camellia_xts_enc_32way)
 	/* input:
arch/x86/crypto/cast5-avx-x86_64-asm_64.S +4 -4
index dc55c3332fcc..ef86c6a966de 100644
@@ -209,7 +209,7 @@
 .text
 
 .align 16
-__cast5_enc_blk16:
+SYM_FUNC_START_LOCAL(__cast5_enc_blk16)
 	/* input:
 	 *	%rdi: ctx
 	 *	RL1: blocks 1 and 2
@@ -280,10 +280,10 @@ __cast5_enc_blk16:
 	outunpack_blocks(RR4, RL4, RTMP, RX, RKM);
 
 	ret;
-ENDPROC(__cast5_enc_blk16)
+SYM_FUNC_END(__cast5_enc_blk16)
 
 .align 16
-__cast5_dec_blk16:
+SYM_FUNC_START_LOCAL(__cast5_dec_blk16)
 	/* input:
 	 *	%rdi: ctx
 	 *	RL1: encrypted blocks 1 and 2
@@ -357,7 +357,7 @@ __cast5_dec_blk16:
 .L__skip_dec:
 	vpsrldq $4, RKR, RKR;
 	jmp .L__dec_tail;
-ENDPROC(__cast5_dec_blk16)
+SYM_FUNC_END(__cast5_dec_blk16)
 
 ENTRY(cast5_ecb_enc_16way)
 	/* input:
arch/x86/crypto/cast6-avx-x86_64-asm_64.S +4 -4
index 4f0a7cdb94d9..b080a7454e70 100644
@@ -247,7 +247,7 @@
 .text
 
 .align 8
-__cast6_enc_blk8:
+SYM_FUNC_START_LOCAL(__cast6_enc_blk8)
 	/* input:
 	 *	%rdi: ctx
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: blocks
@@ -292,10 +292,10 @@ __cast6_enc_blk8:
 	outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
 
 	ret;
-ENDPROC(__cast6_enc_blk8)
+SYM_FUNC_END(__cast6_enc_blk8)
 
 .align 8
-__cast6_dec_blk8:
+SYM_FUNC_START_LOCAL(__cast6_dec_blk8)
 	/* input:
 	 *	%rdi: ctx
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: encrypted blocks
@@ -339,7 +339,7 @@ __cast6_dec_blk8:
 	outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
 
 	ret;
-ENDPROC(__cast6_dec_blk8)
+SYM_FUNC_END(__cast6_dec_blk8)
 
 ENTRY(cast6_ecb_enc_8way)
 	/* input:
arch/x86/crypto/chacha-ssse3-x86_64.S +2 -2
index 2d86c7d6dc88..361d2bfc253c 100644
@@ -33,7 +33,7 @@ CTRINC:	.octa 0x00000003000000020000000100000000
  *
  * Clobbers: %r8d, %xmm4-%xmm7
  */
-chacha_permute:
+SYM_FUNC_START_LOCAL(chacha_permute)
 
 	movdqa		ROT8(%rip),%xmm4
 	movdqa		ROT16(%rip),%xmm5
@@ -109,7 +109,7 @@ chacha_permute:
 	jnz		.Ldoubleround
 
 	ret
-ENDPROC(chacha_permute)
+SYM_FUNC_END(chacha_permute)
 
 ENTRY(chacha_block_xor_ssse3)
 	# %rdi: Input state matrix, s
arch/x86/crypto/ghash-clmulni-intel_asm.S +2 -2
index 5d53effe8abe..e81da25a33ca 100644
@@ -44,7 +44,7 @@
  *	T2
  *	T3
  */
-__clmul_gf128mul_ble:
+SYM_FUNC_START_LOCAL(__clmul_gf128mul_ble)
 	movaps DATA, T1
 	pshufd $0b01001110, DATA, T2
 	pshufd $0b01001110, SHASH, T3
@@ -87,7 +87,7 @@ __clmul_gf128mul_ble:
 	pxor T2, T1
 	pxor T1, DATA
 	ret
-ENDPROC(__clmul_gf128mul_ble)
+SYM_FUNC_END(__clmul_gf128mul_ble)
 
 /* void clmul_ghash_mul(char *dst, const u128 *shash) */
 ENTRY(clmul_ghash_mul)
arch/x86/crypto/serpent-avx-x86_64-asm_64.S +4 -4
index ddc51dbba3af..a098aa015784 100644
@@ -555,7 +555,7 @@
 	transpose_4x4(x0, x1, x2, x3, t0, t1, t2)
 
 .align 8
-__serpent_enc_blk8_avx:
+SYM_FUNC_START_LOCAL(__serpent_enc_blk8_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: blocks
@@ -606,10 +606,10 @@ __serpent_enc_blk8_avx:
 	write_blocks(RA2, RB2, RC2, RD2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_enc_blk8_avx)
+SYM_FUNC_END(__serpent_enc_blk8_avx)
 
 .align 8
-__serpent_dec_blk8_avx:
+SYM_FUNC_START_LOCAL(__serpent_dec_blk8_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: encrypted blocks
@@ -660,7 +660,7 @@ __serpent_dec_blk8_avx:
 	write_blocks(RC2, RD2, RB2, RE2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_dec_blk8_avx)
+SYM_FUNC_END(__serpent_dec_blk8_avx)
 
 ENTRY(serpent_ecb_enc_8way_avx)
 	/* input:
arch/x86/crypto/serpent-avx2-asm_64.S +4 -4
index 37bc1d48106c..6149ba80b4d1 100644
@@ -561,7 +561,7 @@
 	transpose_4x4(x0, x1, x2, x3, t0, t1, t2)
 
 .align 8
-__serpent_enc_blk16:
+SYM_FUNC_START_LOCAL(__serpent_enc_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: plaintext
@@ -612,10 +612,10 @@ __serpent_enc_blk16:
 	write_blocks(RA2, RB2, RC2, RD2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_enc_blk16)
+SYM_FUNC_END(__serpent_enc_blk16)
 
 .align 8
-__serpent_dec_blk16:
+SYM_FUNC_START_LOCAL(__serpent_dec_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: ciphertext
@@ -666,7 +666,7 @@ __serpent_dec_blk16:
 	write_blocks(RC2, RD2, RB2, RE2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_dec_blk16)
+SYM_FUNC_END(__serpent_dec_blk16)
 
 ENTRY(serpent_ecb_enc_16way)
 	/* input:
arch/x86/crypto/twofish-avx-x86_64-asm_64.S +4 -4
index 698b8f2a56e2..588f0a2f63ab 100644
@@ -234,7 +234,7 @@
 	vpxor		x3, wkey, x3;
 
 .align 8
-__twofish_enc_blk8:
+SYM_FUNC_START_LOCAL(__twofish_enc_blk8)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: blocks
@@ -273,10 +273,10 @@ __twofish_enc_blk8:
 	outunpack_blocks(RC2, RD2, RA2, RB2, RK1, RX0, RY0, RK2);
 
 	ret;
-ENDPROC(__twofish_enc_blk8)
+SYM_FUNC_END(__twofish_enc_blk8)
 
 .align 8
-__twofish_dec_blk8:
+SYM_FUNC_START_LOCAL(__twofish_dec_blk8)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RC1, RD1, RA1, RB1, RC2, RD2, RA2, RB2: encrypted blocks
@@ -313,7 +313,7 @@ __twofish_dec_blk8:
 	outunpack_blocks(RA2, RB2, RC2, RD2, RK1, RX0, RY0, RK2);
 
 	ret;
-ENDPROC(__twofish_dec_blk8)
+SYM_FUNC_END(__twofish_dec_blk8)
 
 ENTRY(twofish_ecb_enc_8way)
 	/* input:
Signature · 1 line
2.23.0
merge bot Applied
#15 lore raw

[tip: x86/asm] x86/asm/crypto: Annotate local functions

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     74d8b90a889022e306b543ff2147a6941c99b354
Gitweb:        https://git.kernel.org/tip/74d8b90a889022e306b543ff2147a6941c99b354
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:46 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:07:15 +02:00

x86/asm/crypto: Annotate local functions

Use the newly added SYM_FUNC_START_LOCAL to annotate beginnings of all functions which do not have ".globl" annotation, but their endings are annotated by ENDPROC. This is needed to balance ENDPROC for tools that generate debuginfo.

These function names are not prepended with ".L" as they might appear in call traces and they wouldn't be visible after such change.

To be symmetric, the functions' ENDPROCs are converted to the new SYM_FUNC_END.

---
 arch/x86/crypto/aegis128-aesni-asm.S         |  8 +--
 arch/x86/crypto/aesni-intel_asm.S            | 49 +++++++------------
 arch/x86/crypto/camellia-aesni-avx-asm_64.S  | 20 ++++----
 arch/x86/crypto/camellia-aesni-avx2-asm_64.S | 20 ++++----
 arch/x86/crypto/cast5-avx-x86_64-asm_64.S    |  8 +--
 arch/x86/crypto/cast6-avx-x86_64-asm_64.S    |  8 +--
 arch/x86/crypto/chacha-ssse3-x86_64.S        |  4 +-
 arch/x86/crypto/ghash-clmulni-intel_asm.S    |  4 +-
 arch/x86/crypto/serpent-avx-x86_64-asm_64.S  |  8 +--
 arch/x86/crypto/serpent-avx2-asm_64.S        |  8 +--
 arch/x86/crypto/twofish-avx-x86_64-asm_64.S  |  8 +--
 11 files changed, 68 insertions(+), 77 deletions(-)
arch/x86/crypto/aegis128-aesni-asm.S +4 -4
index 4434607..b7026fd 100644
@@ -71,7 +71,7 @@
  *   %r8
  *   %r9
  */
-__load_partial:
+SYM_FUNC_START_LOCAL(__load_partial)
 	xor %r9d, %r9d
 	pxor MSG, MSG
 
@@ -123,7 +123,7 @@ __load_partial:
 
 .Lld_partial_8:
 	ret
-ENDPROC(__load_partial)
+SYM_FUNC_END(__load_partial)
 
 /*
  * __store_partial: internal ABI
@@ -137,7 +137,7 @@ ENDPROC(__load_partial)
  *   %r9
  *   %r10
  */
-__store_partial:
+SYM_FUNC_START_LOCAL(__store_partial)
 	mov LEN, %r8
 	mov DST, %r9
 
@@ -181,7 +181,7 @@ __store_partial:
 
 .Lst_partial_1:
 	ret
-ENDPROC(__store_partial)
+SYM_FUNC_END(__store_partial)
 
 /*
  * void crypto_aegis128_aesni_init(void *state, const void *key, const void *iv);
arch/x86/crypto/aesni-intel_asm.S +20 -29

154 lines not on this page · raw message

arch/x86/crypto/camellia-aesni-avx-asm_64.S +10 -10
index a14af6e..f4408ca 100644
@@ -189,20 +189,20 @@
  * larger and would only be 0.5% faster (on sandy-bridge).
  */
 .align 8
-roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd:
+SYM_FUNC_START_LOCAL(roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 	roundsm16(%xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
 		  %xmm8, %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm15,
 		  %rcx, (%r9));
 	ret;
-ENDPROC(roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
+SYM_FUNC_END(roundsm16_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 
 .align 8
-roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab:
+SYM_FUNC_START_LOCAL(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	roundsm16(%xmm4, %xmm5, %xmm6, %xmm7, %xmm0, %xmm1, %xmm2, %xmm3,
 		  %xmm12, %xmm13, %xmm14, %xmm15, %xmm8, %xmm9, %xmm10, %xmm11,
 		  %rax, (%r9));
 	ret;
-ENDPROC(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
+SYM_FUNC_END(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 
 /*
  * IN/OUT:
@@ -722,7 +722,7 @@ ENDPROC(roundsm16_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 .text
 
 .align 8
-__camellia_enc_blk16:
+SYM_FUNC_START_LOCAL(__camellia_enc_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 256 bytes
@@ -806,10 +806,10 @@ __camellia_enc_blk16:
 		     %xmm15, %rax, %rcx, 24);
 
 	jmp .Lenc_done;
-ENDPROC(__camellia_enc_blk16)
+SYM_FUNC_END(__camellia_enc_blk16)
 
 .align 8
-__camellia_dec_blk16:
+SYM_FUNC_START_LOCAL(__camellia_dec_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 256 bytes
@@ -891,7 +891,7 @@ __camellia_dec_blk16:
 	      ((key_table + (24) * 8) + 4)(CTX));
 
 	jmp .Ldec_max24;
-ENDPROC(__camellia_dec_blk16)
+SYM_FUNC_END(__camellia_dec_blk16)
 
 ENTRY(camellia_ecb_enc_16way)
 	/* input:
@@ -1120,7 +1120,7 @@ ENDPROC(camellia_ctr_16way)
 	vpxor tmp, iv, iv;
 
 .align 8
-camellia_xts_crypt_16way:
+SYM_FUNC_START_LOCAL(camellia_xts_crypt_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -1254,7 +1254,7 @@ camellia_xts_crypt_16way:
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_xts_crypt_16way)
+SYM_FUNC_END(camellia_xts_crypt_16way)
 
 ENTRY(camellia_xts_enc_16way)
 	/* input:
arch/x86/crypto/camellia-aesni-avx2-asm_64.S +10 -10
index 4be4c7c..72ae3ed 100644
@@ -223,20 +223,20 @@
  * larger and would only marginally faster.
  */
 .align 8
-roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd:
+SYM_FUNC_START_LOCAL(roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 	roundsm32(%ymm0, %ymm1, %ymm2, %ymm3, %ymm4, %ymm5, %ymm6, %ymm7,
 		  %ymm8, %ymm9, %ymm10, %ymm11, %ymm12, %ymm13, %ymm14, %ymm15,
 		  %rcx, (%r9));
 	ret;
-ENDPROC(roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
+SYM_FUNC_END(roundsm32_x0_x1_x2_x3_x4_x5_x6_x7_y0_y1_y2_y3_y4_y5_y6_y7_cd)
 
 .align 8
-roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab:
+SYM_FUNC_START_LOCAL(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 	roundsm32(%ymm4, %ymm5, %ymm6, %ymm7, %ymm0, %ymm1, %ymm2, %ymm3,
 		  %ymm12, %ymm13, %ymm14, %ymm15, %ymm8, %ymm9, %ymm10, %ymm11,
 		  %rax, (%r9));
 	ret;
-ENDPROC(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
+SYM_FUNC_END(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 
 /*
  * IN/OUT:
@@ -760,7 +760,7 @@ ENDPROC(roundsm32_x4_x5_x6_x7_x0_x1_x2_x3_y4_y5_y6_y7_y0_y1_y2_y3_ab)
 .text
 
 .align 8
-__camellia_enc_blk32:
+SYM_FUNC_START_LOCAL(__camellia_enc_blk32)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 512 bytes
@@ -844,10 +844,10 @@ __camellia_enc_blk32:
 		     %ymm15, %rax, %rcx, 24);
 
 	jmp .Lenc_done;
-ENDPROC(__camellia_enc_blk32)
+SYM_FUNC_END(__camellia_enc_blk32)
 
 .align 8
-__camellia_dec_blk32:
+SYM_FUNC_START_LOCAL(__camellia_dec_blk32)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rax: temporary storage, 512 bytes
@@ -929,7 +929,7 @@ __camellia_dec_blk32:
 	      ((key_table + (24) * 8) + 4)(CTX));
 
 	jmp .Ldec_max24;
-ENDPROC(__camellia_dec_blk32)
+SYM_FUNC_END(__camellia_dec_blk32)
 
 ENTRY(camellia_ecb_enc_32way)
 	/* input:
@@ -1222,7 +1222,7 @@ ENDPROC(camellia_ctr_32way)
 	vpxor tmp1, iv, iv;
 
 .align 8
-camellia_xts_crypt_32way:
+SYM_FUNC_START_LOCAL(camellia_xts_crypt_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -1367,7 +1367,7 @@ camellia_xts_crypt_32way:
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_xts_crypt_32way)
+SYM_FUNC_END(camellia_xts_crypt_32way)
 
 ENTRY(camellia_xts_enc_32way)
 	/* input:
arch/x86/crypto/cast5-avx-x86_64-asm_64.S +4 -4
index dc55c33..ef86c6a 100644
@@ -209,7 +209,7 @@
 .text
 
 .align 16
-__cast5_enc_blk16:
+SYM_FUNC_START_LOCAL(__cast5_enc_blk16)
 	/* input:
 	 *	%rdi: ctx
 	 *	RL1: blocks 1 and 2
@@ -280,10 +280,10 @@ __cast5_enc_blk16:
 	outunpack_blocks(RR4, RL4, RTMP, RX, RKM);
 
 	ret;
-ENDPROC(__cast5_enc_blk16)
+SYM_FUNC_END(__cast5_enc_blk16)
 
 .align 16
-__cast5_dec_blk16:
+SYM_FUNC_START_LOCAL(__cast5_dec_blk16)
 	/* input:
 	 *	%rdi: ctx
 	 *	RL1: encrypted blocks 1 and 2
@@ -357,7 +357,7 @@ __cast5_dec_blk16:
 .L__skip_dec:
 	vpsrldq $4, RKR, RKR;
 	jmp .L__dec_tail;
-ENDPROC(__cast5_dec_blk16)
+SYM_FUNC_END(__cast5_dec_blk16)
 
 ENTRY(cast5_ecb_enc_16way)
 	/* input:
arch/x86/crypto/cast6-avx-x86_64-asm_64.S +4 -4
index 4f0a7cd..b080a74 100644
@@ -247,7 +247,7 @@
 .text
 
 .align 8
-__cast6_enc_blk8:
+SYM_FUNC_START_LOCAL(__cast6_enc_blk8)
 	/* input:
 	 *	%rdi: ctx
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: blocks
@@ -292,10 +292,10 @@ __cast6_enc_blk8:
 	outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
 
 	ret;
-ENDPROC(__cast6_enc_blk8)
+SYM_FUNC_END(__cast6_enc_blk8)
 
 .align 8
-__cast6_dec_blk8:
+SYM_FUNC_START_LOCAL(__cast6_dec_blk8)
 	/* input:
 	 *	%rdi: ctx
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: encrypted blocks
@@ -339,7 +339,7 @@ __cast6_dec_blk8:
 	outunpack_blocks(RA2, RB2, RC2, RD2, RTMP, RX, RKRF, RKM);
 
 	ret;
-ENDPROC(__cast6_dec_blk8)
+SYM_FUNC_END(__cast6_dec_blk8)
 
 ENTRY(cast6_ecb_enc_8way)
 	/* input:
arch/x86/crypto/chacha-ssse3-x86_64.S +2 -2
index 2d86c7d..361d2bf 100644
@@ -33,7 +33,7 @@ CTRINC:	.octa 0x00000003000000020000000100000000
  *
  * Clobbers: %r8d, %xmm4-%xmm7
  */
-chacha_permute:
+SYM_FUNC_START_LOCAL(chacha_permute)
 
 	movdqa		ROT8(%rip),%xmm4
 	movdqa		ROT16(%rip),%xmm5
@@ -109,7 +109,7 @@ chacha_permute:
 	jnz		.Ldoubleround
 
 	ret
-ENDPROC(chacha_permute)
+SYM_FUNC_END(chacha_permute)
 
 ENTRY(chacha_block_xor_ssse3)
 	# %rdi: Input state matrix, s
arch/x86/crypto/ghash-clmulni-intel_asm.S +2 -2
index 5d53eff..e81da25 100644
@@ -44,7 +44,7 @@
  *	T2
  *	T3
  */
-__clmul_gf128mul_ble:
+SYM_FUNC_START_LOCAL(__clmul_gf128mul_ble)
 	movaps DATA, T1
 	pshufd $0b01001110, DATA, T2
 	pshufd $0b01001110, SHASH, T3
@@ -87,7 +87,7 @@ __clmul_gf128mul_ble:
 	pxor T2, T1
 	pxor T1, DATA
 	ret
-ENDPROC(__clmul_gf128mul_ble)
+SYM_FUNC_END(__clmul_gf128mul_ble)
 
 /* void clmul_ghash_mul(char *dst, const u128 *shash) */
 ENTRY(clmul_ghash_mul)
arch/x86/crypto/serpent-avx-x86_64-asm_64.S +4 -4
index ddc51db..a098aa0 100644
@@ -555,7 +555,7 @@
 	transpose_4x4(x0, x1, x2, x3, t0, t1, t2)
 
 .align 8
-__serpent_enc_blk8_avx:
+SYM_FUNC_START_LOCAL(__serpent_enc_blk8_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: blocks
@@ -606,10 +606,10 @@ __serpent_enc_blk8_avx:
 	write_blocks(RA2, RB2, RC2, RD2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_enc_blk8_avx)
+SYM_FUNC_END(__serpent_enc_blk8_avx)
 
 .align 8
-__serpent_dec_blk8_avx:
+SYM_FUNC_START_LOCAL(__serpent_dec_blk8_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: encrypted blocks
@@ -660,7 +660,7 @@ __serpent_dec_blk8_avx:
 	write_blocks(RC2, RD2, RB2, RE2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_dec_blk8_avx)
+SYM_FUNC_END(__serpent_dec_blk8_avx)
 
 ENTRY(serpent_ecb_enc_8way_avx)
 	/* input:
arch/x86/crypto/serpent-avx2-asm_64.S +4 -4
index 37bc1d4..6149ba8 100644
@@ -561,7 +561,7 @@
 	transpose_4x4(x0, x1, x2, x3, t0, t1, t2)
 
 .align 8
-__serpent_enc_blk16:
+SYM_FUNC_START_LOCAL(__serpent_enc_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: plaintext
@@ -612,10 +612,10 @@ __serpent_enc_blk16:
 	write_blocks(RA2, RB2, RC2, RD2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_enc_blk16)
+SYM_FUNC_END(__serpent_enc_blk16)
 
 .align 8
-__serpent_dec_blk16:
+SYM_FUNC_START_LOCAL(__serpent_dec_blk16)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: ciphertext
@@ -666,7 +666,7 @@ __serpent_dec_blk16:
 	write_blocks(RC2, RD2, RB2, RE2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_dec_blk16)
+SYM_FUNC_END(__serpent_dec_blk16)
 
 ENTRY(serpent_ecb_enc_16way)
 	/* input:
arch/x86/crypto/twofish-avx-x86_64-asm_64.S +4 -4
index 698b8f2..588f0a2 100644
@@ -234,7 +234,7 @@
 	vpxor		x3, wkey, x3;
 
 .align 8
-__twofish_enc_blk8:
+SYM_FUNC_START_LOCAL(__twofish_enc_blk8)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2: blocks
@@ -273,10 +273,10 @@ __twofish_enc_blk8:
 	outunpack_blocks(RC2, RD2, RA2, RB2, RK1, RX0, RY0, RK2);
 
 	ret;
-ENDPROC(__twofish_enc_blk8)
+SYM_FUNC_END(__twofish_enc_blk8)
 
 .align 8
-__twofish_dec_blk8:
+SYM_FUNC_START_LOCAL(__twofish_dec_blk8)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	RC1, RD1, RA1, RB1, RC2, RD2, RA2, RB2: encrypted blocks
@@ -313,7 +313,7 @@ __twofish_dec_blk8:
 	outunpack_blocks(RA2, RB2, RC2, RD2, RK1, RX0, RY0, RK2);
 
 	ret;
-ENDPROC(__twofish_dec_blk8)
+SYM_FUNC_END(__twofish_dec_blk8)
 
 ENTRY(twofish_ecb_enc_8way)
 	/* input:
author
#16 lore raw

PATCH v9 7/28 x86/boot: Annotate local functions

In reply to Jiri Slaby

.Lrelocated, .Lpaging_enabled, .Lno_longmode, and .Lin_pm32 are self-standing local functions, annotate them as such and preserve "no alignment".

The annotations do not generate anything yet.

Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>

---

Notes:
[v9] preserve alignments

 arch/x86/boot/compressed/head_32.S | 3 ++-
 arch/x86/boot/compressed/head_64.S | 9 ++++++---
 arch/x86/boot/pmjump.S             | 4 ++--
 3 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/boot/compressed/head_32.S +2 -1
index 5e30eaaf8576..f9e2a80bd699 100644
@@ -209,7 +209,7 @@ ENDPROC(efi32_stub_entry)
 #endif
 
 	.text
-.Lrelocated:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
 /*
  * Clear BSS (stack is currently empty)
@@ -260,6 +260,7 @@ ENDPROC(efi32_stub_entry)
  */
 	xorl	%ebx, %ebx
 	jmp	*%eax
+SYM_FUNC_END(.Lrelocated)
 
 #ifdef CONFIG_EFI_STUB
 	.data
arch/x86/boot/compressed/head_64.S +6 -3
index d98cd483377e..7afe6e067066 100644
@@ -511,7 +511,7 @@ ENDPROC(efi64_stub_entry)
 #endif
 
 	.text
-.Lrelocated:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
 /*
  * Clear BSS (stack is currently empty)
@@ -540,6 +540,7 @@ ENDPROC(efi64_stub_entry)
  * Jump to the decompressed kernel.
  */
 	jmp	*%rax
+SYM_FUNC_END(.Lrelocated)
 
 /*
  * Adjust the global offset table
@@ -635,9 +636,10 @@ ENTRY(trampoline_32bit_src)
 	lret
 
 	.code64
-.Lpaging_enabled:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
 	/* Return from the trampoline */
 	jmp	*%rdi
+SYM_FUNC_END(.Lpaging_enabled)
 
 	/*
          * The trampoline code has a size limit.
@@ -647,11 +649,12 @@ ENTRY(trampoline_32bit_src)
 	.org	trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE
 
 	.code32
-.Lno_longmode:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
 	/* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */
 1:
 	hlt
 	jmp     1b
+SYM_FUNC_END(.Lno_longmode)
 
 #include "../../kernel/verify_cpu.S"
 
arch/x86/boot/pmjump.S +2 -2
index ea88d52eeac7..81658fe35380 100644
@@ -46,7 +46,7 @@ ENDPROC(protected_mode_jump)
 
 	.code32
 	.section ".text32","ax"
-.Lin_pm32:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lin_pm32)
 	# Set up data segments for flat 32-bit mode
 	movl	%ecx, %ds
 	movl	%ecx, %es
@@ -72,4 +72,4 @@ ENDPROC(protected_mode_jump)
 	lldt	%cx
 
 	jmpl	*%eax			# Jump to the 32-bit entrypoint
-ENDPROC(.Lin_pm32)
+SYM_FUNC_END(.Lin_pm32)
Signature · 1 line
2.23.0
maintainer
#17 lore raw

Re: [PATCH v9 07/28] x86/boot: Annotate local functions

Quoted 5 lines · Jiri Slaby

.Lrelocated, .Lpaging_enabled, .Lno_longmode, and .Lin_pm32 are self-standing local functions, annotate them as such and preserve "no alignment".

The annotations do not generate anything yet.

So the annotation is only documentational, right?

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
author
#18 lore raw

Re: [PATCH v9 07/28] x86/boot: Annotate local functions

Quoted 8 lines · Borislav Petkov
Quoted 5 lines · Jiri Slaby

.Lrelocated, .Lpaging_enabled, .Lno_longmode, and .Lin_pm32 are self-standing local functions, annotate them as such and preserve "no alignment".

The annotations do not generate anything yet.

So the annotation is only documentational, right?

Right.

thanks,

Signature · 2 lines
js
suse labs
merge bot Applied
#19 lore raw

[tip: x86/asm] x86/boot: Annotate local functions

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     deff8a24e1021fb39dddf5f6bc5832e0e3a632ea
Gitweb:        https://git.kernel.org/tip/deff8a24e1021fb39dddf5f6bc5832e0e3a632ea
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:47 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:29:34 +02:00

x86/boot: Annotate local functions

.Lrelocated, .Lpaging_enabled, .Lno_longmode, and .Lin_pm32 are self-standing local functions, annotate them as such and preserve "no alignment".

The annotations do not generate anything yet.

Cc Cao jin <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Kate Stewart <[email protected]>
Cc "Kirill A. Shutemov" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Wei Huang <[email protected]>
Cc x86-ml <[email protected]>
Cc Xiaoyao Li <[email protected]>
---
 arch/x86/boot/compressed/head_32.S |  3 ++-
 arch/x86/boot/compressed/head_64.S |  9 ++++++---
 arch/x86/boot/pmjump.S             |  4 ++--
 3 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/boot/compressed/head_32.S +2 -1
index 5e30eaa..f9e2a80 100644
@@ -209,7 +209,7 @@ ENDPROC(efi32_stub_entry)
 #endif
 
 	.text
-.Lrelocated:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
 /*
  * Clear BSS (stack is currently empty)
@@ -260,6 +260,7 @@ ENDPROC(efi32_stub_entry)
  */
 	xorl	%ebx, %ebx
 	jmp	*%eax
+SYM_FUNC_END(.Lrelocated)
 
 #ifdef CONFIG_EFI_STUB
 	.data
arch/x86/boot/compressed/head_64.S +6 -3
index d98cd48..7afe6e0 100644
@@ -511,7 +511,7 @@ ENDPROC(efi64_stub_entry)
 #endif
 
 	.text
-.Lrelocated:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
 /*
  * Clear BSS (stack is currently empty)
@@ -540,6 +540,7 @@ ENDPROC(efi64_stub_entry)
  * Jump to the decompressed kernel.
  */
 	jmp	*%rax
+SYM_FUNC_END(.Lrelocated)
 
 /*
  * Adjust the global offset table
@@ -635,9 +636,10 @@ ENTRY(trampoline_32bit_src)
 	lret
 
 	.code64
-.Lpaging_enabled:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
 	/* Return from the trampoline */
 	jmp	*%rdi
+SYM_FUNC_END(.Lpaging_enabled)
 
 	/*
          * The trampoline code has a size limit.
@@ -647,11 +649,12 @@ ENTRY(trampoline_32bit_src)
 	.org	trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE
 
 	.code32
-.Lno_longmode:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
 	/* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */
 1:
 	hlt
 	jmp     1b
+SYM_FUNC_END(.Lno_longmode)
 
 #include "../../kernel/verify_cpu.S"
 
arch/x86/boot/pmjump.S +2 -2
index ea88d52..81658fe 100644
@@ -46,7 +46,7 @@ ENDPROC(protected_mode_jump)
 
 	.code32
 	.section ".text32","ax"
-.Lin_pm32:
+SYM_FUNC_START_LOCAL_NOALIGN(.Lin_pm32)
 	# Set up data segments for flat 32-bit mode
 	movl	%ecx, %ds
 	movl	%ecx, %es
@@ -72,4 +72,4 @@ ENDPROC(protected_mode_jump)
 	lldt	%cx
 
 	jmpl	*%eax			# Jump to the 32-bit entrypoint
-ENDPROC(.Lin_pm32)
+SYM_FUNC_END(.Lin_pm32)
author
#20 lore raw

PATCH v9 8/28 x86/uaccess: Annotate local function

In reply to Jiri Slaby

.Lcopy_user_handle_tail is a self-standing local function, annotate it as such using SYM_CODE_START_LOCAL.

Again, no functional change, just documentation.

Cc "H. Peter Anvin" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Ingo Molnar <[email protected]>
---
 arch/x86/lib/copy_user_64.S | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/x86/lib/copy_user_64.S +2 -3
index 86976b55ae74..4a12b3c120bf 100644
@@ -230,8 +230,7 @@ EXPORT_SYMBOL(copy_user_enhanced_fast_string)
  * Output:
  * eax uncopied bytes or 0 if successful.
  */
-ALIGN;
-.Lcopy_user_handle_tail:
+SYM_CODE_START_LOCAL(.Lcopy_user_handle_tail)
 	movl %edx,%ecx
 1:	rep movsb
 2:	mov %ecx,%eax
@@ -239,7 +238,7 @@ ALIGN;
 	ret
 
 	_ASM_EXTABLE_UA(1b, 2b)
-END(.Lcopy_user_handle_tail)
+SYM_CODE_END(.Lcopy_user_handle_tail)
 
 /*
  * copy_user_nocache - Uncached memory copy with exception handling
Signature · 1 line
2.23.0
merge bot Applied
#21 lore raw

[tip: x86/asm] x86/uaccess: Annotate local function

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     fa97220196fda2613a6226cc30b573bd8976e15b
Gitweb:        https://git.kernel.org/tip/fa97220196fda2613a6226cc30b573bd8976e15b
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:48 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:31:42 +02:00

x86/uaccess: Annotate local function

.Lcopy_user_handle_tail is a self-standing local function, annotate it as such using SYM_CODE_START_LOCAL.

Again, no functional change, just documentation.

---
 arch/x86/lib/copy_user_64.S | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/x86/lib/copy_user_64.S +2 -3
index 86976b5..4a12b3c 100644
@@ -230,8 +230,7 @@ EXPORT_SYMBOL(copy_user_enhanced_fast_string)
  * Output:
  * eax uncopied bytes or 0 if successful.
  */
-ALIGN;
-.Lcopy_user_handle_tail:
+SYM_CODE_START_LOCAL(.Lcopy_user_handle_tail)
 	movl %edx,%ecx
 1:	rep movsb
 2:	mov %ecx,%eax
@@ -239,7 +238,7 @@ ALIGN;
 	ret
 
 	_ASM_EXTABLE_UA(1b, 2b)
-END(.Lcopy_user_handle_tail)
+SYM_CODE_END(.Lcopy_user_handle_tail)
 
 /*
  * copy_user_nocache - Uncached memory copy with exception handling
author
#22 lore raw

PATCH v9 9/28 x86/asm: Annotate aliases

In reply to Jiri Slaby

_key_expansion_128 is an alias to _key_expansion_256a, __memcpy to memcpy, xen_syscall32_target to xen_sysenter_target, and so on. Annotate them all using the new SYM_FUNC_START_ALIAS, SYM_FUNC_START_LOCAL_ALIAS, and SYM_FUNC_END_ALIAS. This will make the tools generating the debuginfo happy as it avoid nesting and double symbols.

Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Boris Ostrovsky <[email protected]>
---
 arch/x86/crypto/aesni-intel_asm.S | 5 ++---
 arch/x86/lib/memcpy_64.S          | 4 ++--
 arch/x86/lib/memmove_64.S         | 4 ++--
 arch/x86/lib/memset_64.S          | 4 ++--
 arch/x86/xen/xen-asm_64.S         | 4 ++--
 5 files changed, 10 insertions(+), 11 deletions(-)
arch/x86/crypto/aesni-intel_asm.S +2 -3
index e0a5fb462a0a..9d8d5f2296e1 100644
@@ -1757,8 +1757,7 @@ ENDPROC(aesni_gcm_finalize)
 #endif
 
 
-.align 4
-_key_expansion_128:
+SYM_FUNC_START_LOCAL_ALIAS(_key_expansion_128)
 SYM_FUNC_START_LOCAL(_key_expansion_256a)
 	pshufd $0b11111111, %xmm1, %xmm1
 	shufps $0b00010000, %xmm0, %xmm4
@@ -1769,8 +1768,8 @@ SYM_FUNC_START_LOCAL(_key_expansion_256a)
 	movaps %xmm0, (TKEYP)
 	add $0x10, TKEYP
 	ret
-ENDPROC(_key_expansion_128)
 SYM_FUNC_END(_key_expansion_256a)
+SYM_FUNC_END_ALIAS(_key_expansion_128)
 
 SYM_FUNC_START_LOCAL(_key_expansion_192a)
 	pshufd $0b01010101, %xmm1, %xmm1
arch/x86/lib/memcpy_64.S +2 -2
index 92748660ba51..57a64266ba69 100644
@@ -28,7 +28,7 @@
  * Output:
  * rax original destination
  */
-ENTRY(__memcpy)
+SYM_FUNC_START_ALIAS(__memcpy)
 ENTRY(memcpy)
 	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp memcpy_erms", X86_FEATURE_ERMS
@@ -42,7 +42,7 @@ ENTRY(memcpy)
 	rep movsb
 	ret
 ENDPROC(memcpy)
-ENDPROC(__memcpy)
+SYM_FUNC_END_ALIAS(__memcpy)
 EXPORT_SYMBOL(memcpy)
 EXPORT_SYMBOL(__memcpy)
 
arch/x86/lib/memmove_64.S +2 -2
index bbec69d8223b..50c1648311b3 100644
@@ -26,7 +26,7 @@
  */
 .weak memmove
 
-ENTRY(memmove)
+SYM_FUNC_START_ALIAS(memmove)
 ENTRY(__memmove)
 
 	/* Handle more 32 bytes in loop */
@@ -208,6 +208,6 @@ ENTRY(__memmove)
 13:
 	retq
 ENDPROC(__memmove)
-ENDPROC(memmove)
+SYM_FUNC_END_ALIAS(memmove)
 EXPORT_SYMBOL(__memmove)
 EXPORT_SYMBOL(memmove)
arch/x86/lib/memset_64.S +2 -2
index 9bc861c71e75..927ac44d34aa 100644
@@ -19,7 +19,7 @@
  *
  * rax   original destination
  */
-ENTRY(memset)
+SYM_FUNC_START_ALIAS(memset)
 ENTRY(__memset)
 	/*
 	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
@@ -43,8 +43,8 @@ ENTRY(__memset)
 	rep stosb
 	movq %r9,%rax
 	ret
-ENDPROC(memset)
 ENDPROC(__memset)
+SYM_FUNC_END_ALIAS(memset)
 EXPORT_SYMBOL(memset)
 EXPORT_SYMBOL(__memset)
 
arch/x86/xen/xen-asm_64.S +2 -2
index ebf610b49c06..45c1249f370d 100644
@@ -167,13 +167,13 @@ ENDPROC(xen_sysenter_target)
 
 #else /* !CONFIG_IA32_EMULATION */
 
-ENTRY(xen_syscall32_target)
+SYM_FUNC_START_ALIAS(xen_syscall32_target)
 ENTRY(xen_sysenter_target)
 	lea 16(%rsp), %rsp	/* strip %rcx, %r11 */
 	mov $-ENOSYS, %rax
 	pushq $0
 	jmp hypercall_iret
-ENDPROC(xen_syscall32_target)
 ENDPROC(xen_sysenter_target)
+SYM_FUNC_END_ALIAS(xen_syscall32_target)
 
 #endif	/* CONFIG_IA32_EMULATION */
Signature · 7 lines
2.23.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
merge bot Applied
#23 lore raw

[tip: x86/asm] x86/asm: Annotate aliases

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     e9b9d020c4873d5e90d9986cfd137afbafbc5bfa
Gitweb:        https://git.kernel.org/tip/e9b9d020c4873d5e90d9986cfd137afbafbc5bfa
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:49 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:38:23 +02:00

x86/asm: Annotate aliases

_key_expansion_128 is an alias to _key_expansion_256a, __memcpy to memcpy, xen_syscall32_target to xen_sysenter_target, and so on. Annotate them all using the new SYM_FUNC_START_ALIAS, SYM_FUNC_START_LOCAL_ALIAS, and SYM_FUNC_END_ALIAS. This will make the tools generating the debuginfo happy as it avoids nesting and double symbols.

---
 arch/x86/crypto/aesni-intel_asm.S | 5 ++---
 arch/x86/lib/memcpy_64.S          | 4 ++--
 arch/x86/lib/memmove_64.S         | 4 ++--
 arch/x86/lib/memset_64.S          | 4 ++--
 arch/x86/xen/xen-asm_64.S         | 4 ++--
 5 files changed, 10 insertions(+), 11 deletions(-)
arch/x86/crypto/aesni-intel_asm.S +2 -3
index e0a5fb4..9d8d5f2 100644
@@ -1757,8 +1757,7 @@ ENDPROC(aesni_gcm_finalize)
 #endif
 
 
-.align 4
-_key_expansion_128:
+SYM_FUNC_START_LOCAL_ALIAS(_key_expansion_128)
 SYM_FUNC_START_LOCAL(_key_expansion_256a)
 	pshufd $0b11111111, %xmm1, %xmm1
 	shufps $0b00010000, %xmm0, %xmm4
@@ -1769,8 +1768,8 @@ SYM_FUNC_START_LOCAL(_key_expansion_256a)
 	movaps %xmm0, (TKEYP)
 	add $0x10, TKEYP
 	ret
-ENDPROC(_key_expansion_128)
 SYM_FUNC_END(_key_expansion_256a)
+SYM_FUNC_END_ALIAS(_key_expansion_128)
 
 SYM_FUNC_START_LOCAL(_key_expansion_192a)
 	pshufd $0b01010101, %xmm1, %xmm1
arch/x86/lib/memcpy_64.S +2 -2
index 9274866..57a6426 100644
@@ -28,7 +28,7 @@
  * Output:
  * rax original destination
  */
-ENTRY(__memcpy)
+SYM_FUNC_START_ALIAS(__memcpy)
 ENTRY(memcpy)
 	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp memcpy_erms", X86_FEATURE_ERMS
@@ -42,7 +42,7 @@ ENTRY(memcpy)
 	rep movsb
 	ret
 ENDPROC(memcpy)
-ENDPROC(__memcpy)
+SYM_FUNC_END_ALIAS(__memcpy)
 EXPORT_SYMBOL(memcpy)
 EXPORT_SYMBOL(__memcpy)
 
arch/x86/lib/memmove_64.S +2 -2
index bbec69d..50c1648 100644
@@ -26,7 +26,7 @@
  */
 .weak memmove
 
-ENTRY(memmove)
+SYM_FUNC_START_ALIAS(memmove)
 ENTRY(__memmove)
 
 	/* Handle more 32 bytes in loop */
@@ -208,6 +208,6 @@ ENTRY(__memmove)
 13:
 	retq
 ENDPROC(__memmove)
-ENDPROC(memmove)
+SYM_FUNC_END_ALIAS(memmove)
 EXPORT_SYMBOL(__memmove)
 EXPORT_SYMBOL(memmove)
arch/x86/lib/memset_64.S +2 -2
index 9bc861c..927ac44 100644
@@ -19,7 +19,7 @@
  *
  * rax   original destination
  */
-ENTRY(memset)
+SYM_FUNC_START_ALIAS(memset)
 ENTRY(__memset)
 	/*
 	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
@@ -43,8 +43,8 @@ ENTRY(__memset)
 	rep stosb
 	movq %r9,%rax
 	ret
-ENDPROC(memset)
 ENDPROC(__memset)
+SYM_FUNC_END_ALIAS(memset)
 EXPORT_SYMBOL(memset)
 EXPORT_SYMBOL(__memset)
 
arch/x86/xen/xen-asm_64.S +2 -2
index ebf610b..45c1249 100644
@@ -167,13 +167,13 @@ ENDPROC(xen_sysenter_target)
 
 #else /* !CONFIG_IA32_EMULATION */
 
-ENTRY(xen_syscall32_target)
+SYM_FUNC_START_ALIAS(xen_syscall32_target)
 ENTRY(xen_sysenter_target)
 	lea 16(%rsp), %rsp	/* strip %rcx, %r11 */
 	mov $-ENOSYS, %rax
 	pushq $0
 	jmp hypercall_iret
-ENDPROC(xen_syscall32_target)
 ENDPROC(xen_sysenter_target)
+SYM_FUNC_END_ALIAS(xen_syscall32_target)
 
 #endif	/* CONFIG_IA32_EMULATION */

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

author
#24 lore raw

PATCH v9 10/28 x86/asm/entry: Annotate interrupt symbols properly

In reply to Jiri Slaby

* annotate functions properly by SYM_CODE_START, SYM_CODE_START_LOCAL* and SYM_CODE_END -- these are not C-like functions, so they have to be annotated using CODE.
* use SYM_INNER_LABEL* for labels being in the middle of other functions This prevents nested labels annotations.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>

---

Notes:
[v4] alignments preserved

 arch/x86/entry/entry_32.S | 28 ++++++++++++++--------------
 arch/x86/entry/entry_64.S | 13 ++++++-------
 2 files changed, 20 insertions(+), 21 deletions(-)
arch/x86/entry/entry_32.S +14 -14
index f83ca5aa8b77..f37ff583cecb 100644
@@ -807,8 +807,7 @@ END(ret_from_fork)
  */
 
 	# userspace resumption stub bypassing syscall exit tracing
-	ALIGN
-ret_from_exception:
+SYM_CODE_START_LOCAL(ret_from_exception)
 	preempt_stop(CLBR_ANY)
 ret_from_intr:
 #ifdef CONFIG_VM86
@@ -825,13 +824,13 @@ ret_from_intr:
 	cmpl	$USER_RPL, %eax
 	jb	restore_all_kernel		# not returning to v8086 or userspace
 
-ENTRY(resume_userspace)
+SYM_INNER_LABEL_ALIGN(resume_userspace, SYM_L_LOCAL)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl	%esp, %eax
 	call	prepare_exit_to_usermode
 	jmp	restore_all
-END(ret_from_exception)
+SYM_CODE_END(ret_from_exception)
 
 GLOBAL(__begin_SYSENTER_singlestep_region)
 /*
@@ -1100,7 +1099,7 @@ restore_all_kernel:
 	jmp	.Lirq_return
 
 .section .fixup, "ax"
-ENTRY(iret_exc	)
+SYM_CODE_START(iret_exc)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
 
@@ -1117,6 +1116,7 @@ ENTRY(iret_exc	)
 #endif
 
 	jmp	common_exception
+SYM_CODE_END(iret_exc)
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
 ENDPROC(entry_INT80_32)
@@ -1182,7 +1182,7 @@ ENTRY(spurious_entries_start)
     .endr
 END(spurious_entries_start)
 
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 	SAVE_ALL switch_stacks=1
@@ -1191,7 +1191,7 @@ common_spurious:
 	movl	%esp, %eax
 	call	smp_spurious_interrupt
 	jmp	ret_from_intr
-ENDPROC(common_spurious)
+SYM_CODE_END(common_spurious)
 #endif
 
 /*
@@ -1199,7 +1199,7 @@ ENDPROC(common_spurious)
  * so IRQ-flags tracing has to follow that:
  */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 
@@ -1209,7 +1209,7 @@ common_interrupt:
 	movl	%esp, %eax
 	call	do_IRQ
 	jmp	ret_from_intr
-ENDPROC(common_interrupt)
+SYM_CODE_END(common_interrupt)
 
 #define BUILD_INTERRUPT3(name, nr, fn)			\
 ENTRY(name)						\
@@ -1361,7 +1361,7 @@ ENTRY(xen_hypervisor_callback)
 
 	jmp	xen_iret_crit_fixup
 
-ENTRY(xen_do_upcall)
+SYM_INNER_LABEL_ALIGN(xen_do_upcall, SYM_L_GLOBAL)
 1:	mov	%esp, %eax
 	call	xen_evtchn_do_upcall
 #ifndef CONFIG_PREEMPTION
@@ -1447,7 +1447,7 @@ ENTRY(page_fault)
 	jmp	common_exception_read_cr2
 END(page_fault)
 
-common_exception_read_cr2:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception_read_cr2)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1
 
@@ -1470,9 +1470,9 @@ common_exception_read_cr2:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception_read_cr2)
+SYM_CODE_END(common_exception_read_cr2)
 
-common_exception:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1
 	ENCODE_FRAME_POINTER
@@ -1492,7 +1492,7 @@ common_exception:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception)
+SYM_CODE_END(common_exception)
 
 ENTRY(debug)
 	/*
arch/x86/entry/entry_64.S +6 -7
index db43526cecfa..607e25f54ff4 100644
@@ -589,18 +589,18 @@ _ASM_NOKPROBE(interrupt_entry)
  * The interrupt stubs push (~vector+0x80) onto the stack and
  * then jump to common_spurious/interrupt.
  */
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
 	call	smp_spurious_interrupt		/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(common_spurious)
+SYM_CODE_END(common_spurious)
 _ASM_NOKPROBE(common_spurious)
 
 /* common_interrupt is a hotpath. Align it */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
@@ -695,7 +695,7 @@ GLOBAL(restore_regs_and_return_to_kernel)
 	 */
 	INTERRUPT_RETURN
 
-ENTRY(native_iret)
+SYM_INNER_LABEL_ALIGN(native_iret, SYM_L_GLOBAL)
 	UNWIND_HINT_IRET_REGS
 	/*
 	 * Are we returning to a stack segment from the LDT?  Note: in
@@ -706,8 +706,7 @@ ENTRY(native_iret)
 	jnz	native_irq_return_ldt
 #endif
 
-.global native_irq_return_iret
-native_irq_return_iret:
+SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL)
 	/*
 	 * This may fault.  Non-paranoid faults on return to userspace are
 	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
@@ -789,7 +788,7 @@ native_irq_return_ldt:
 	 */
 	jmp	native_irq_return_iret
 #endif
-END(common_interrupt)
+SYM_CODE_END(common_interrupt)
 _ASM_NOKPROBE(common_interrupt)
 
 /*
Signature · 1 line
2.23.0
merge bot Applied
#25 lore raw

[tip: x86/asm] x86/asm/entry: Annotate interrupt symbols properly

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     cc66936e504a5b91dda52fda90203e174a7a71aa
Gitweb:        https://git.kernel.org/tip/cc66936e504a5b91dda52fda90203e174a7a71aa
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:50 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:40:11 +02:00

x86/asm/entry: Annotate interrupt symbols properly

* annotate functions properly by SYM_CODE_START, SYM_CODE_START_LOCAL* and SYM_CODE_END -- these are not C-like functions, so they have to be annotated using CODE.
* use SYM_INNER_LABEL* for labels being in the middle of other functions This prevents nested labels annotations.

---
 arch/x86/entry/entry_32.S | 28 ++++++++++++++--------------
 arch/x86/entry/entry_64.S | 13 ++++++-------
 2 files changed, 20 insertions(+), 21 deletions(-)
arch/x86/entry/entry_32.S +14 -14
index f83ca5a..f37ff58 100644
@@ -807,8 +807,7 @@ END(ret_from_fork)
  */
 
 	# userspace resumption stub bypassing syscall exit tracing
-	ALIGN
-ret_from_exception:
+SYM_CODE_START_LOCAL(ret_from_exception)
 	preempt_stop(CLBR_ANY)
 ret_from_intr:
 #ifdef CONFIG_VM86
@@ -825,13 +824,13 @@ ret_from_intr:
 	cmpl	$USER_RPL, %eax
 	jb	restore_all_kernel		# not returning to v8086 or userspace
 
-ENTRY(resume_userspace)
+SYM_INNER_LABEL_ALIGN(resume_userspace, SYM_L_LOCAL)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl	%esp, %eax
 	call	prepare_exit_to_usermode
 	jmp	restore_all
-END(ret_from_exception)
+SYM_CODE_END(ret_from_exception)
 
 GLOBAL(__begin_SYSENTER_singlestep_region)
 /*
@@ -1100,7 +1099,7 @@ restore_all_kernel:
 	jmp	.Lirq_return
 
 .section .fixup, "ax"
-ENTRY(iret_exc	)
+SYM_CODE_START(iret_exc)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
 
@@ -1117,6 +1116,7 @@ ENTRY(iret_exc	)
 #endif
 
 	jmp	common_exception
+SYM_CODE_END(iret_exc)
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
 ENDPROC(entry_INT80_32)
@@ -1182,7 +1182,7 @@ ENTRY(spurious_entries_start)
     .endr
 END(spurious_entries_start)
 
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 	SAVE_ALL switch_stacks=1
@@ -1191,7 +1191,7 @@ common_spurious:
 	movl	%esp, %eax
 	call	smp_spurious_interrupt
 	jmp	ret_from_intr
-ENDPROC(common_spurious)
+SYM_CODE_END(common_spurious)
 #endif
 
 /*
@@ -1199,7 +1199,7 @@ ENDPROC(common_spurious)
  * so IRQ-flags tracing has to follow that:
  */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 
@@ -1209,7 +1209,7 @@ common_interrupt:
 	movl	%esp, %eax
 	call	do_IRQ
 	jmp	ret_from_intr
-ENDPROC(common_interrupt)
+SYM_CODE_END(common_interrupt)
 
 #define BUILD_INTERRUPT3(name, nr, fn)			\
 ENTRY(name)						\
@@ -1361,7 +1361,7 @@ ENTRY(xen_hypervisor_callback)
 
 	jmp	xen_iret_crit_fixup
 
-ENTRY(xen_do_upcall)
+SYM_INNER_LABEL_ALIGN(xen_do_upcall, SYM_L_GLOBAL)
 1:	mov	%esp, %eax
 	call	xen_evtchn_do_upcall
 #ifndef CONFIG_PREEMPTION
@@ -1447,7 +1447,7 @@ ENTRY(page_fault)
 	jmp	common_exception_read_cr2
 END(page_fault)
 
-common_exception_read_cr2:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception_read_cr2)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1
 
@@ -1470,9 +1470,9 @@ common_exception_read_cr2:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception_read_cr2)
+SYM_CODE_END(common_exception_read_cr2)
 
-common_exception:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception)
 	/* the function address is in %gs's slot on the stack */
 	SAVE_ALL switch_stacks=1 skip_gs=1
 	ENCODE_FRAME_POINTER
@@ -1492,7 +1492,7 @@ common_exception:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception)
+SYM_CODE_END(common_exception)
 
 ENTRY(debug)
 	/*
arch/x86/entry/entry_64.S +6 -7
index db43526..607e25f 100644
@@ -589,18 +589,18 @@ _ASM_NOKPROBE(interrupt_entry)
  * The interrupt stubs push (~vector+0x80) onto the stack and
  * then jump to common_spurious/interrupt.
  */
-common_spurious:
+SYM_CODE_START_LOCAL(common_spurious)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
 	call	smp_spurious_interrupt		/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(common_spurious)
+SYM_CODE_END(common_spurious)
 _ASM_NOKPROBE(common_spurious)
 
 /* common_interrupt is a hotpath. Align it */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
@@ -695,7 +695,7 @@ GLOBAL(restore_regs_and_return_to_kernel)
 	 */
 	INTERRUPT_RETURN
 
-ENTRY(native_iret)
+SYM_INNER_LABEL_ALIGN(native_iret, SYM_L_GLOBAL)
 	UNWIND_HINT_IRET_REGS
 	/*
 	 * Are we returning to a stack segment from the LDT?  Note: in
@@ -706,8 +706,7 @@ ENTRY(native_iret)
 	jnz	native_irq_return_ldt
 #endif
 
-.global native_irq_return_iret
-native_irq_return_iret:
+SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL)
 	/*
 	 * This may fault.  Non-paranoid faults on return to userspace are
 	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
@@ -789,7 +788,7 @@ native_irq_return_ldt:
 	 */
 	jmp	native_irq_return_iret
 #endif
-END(common_interrupt)
+SYM_CODE_END(common_interrupt)
 _ASM_NOKPROBE(common_interrupt)
 
 /*
author
#26 lore raw

PATCH v9 11/28 x86/asm/head: Annotate data appropriately

In reply to Jiri Slaby

Use the new SYM_DATA, SYM_DATA_START, and SYM_DATA_END in both 32 and 64 bit head_*.S. In the 64-bit version, define also SYM_DATA_START_PAGE_ALIGNED locally using the new SYM_START. It is used in the code instead of NEXT_PAGE() which was defined in this file and had been using the obsolete macro GLOBAL().

Now, the data in the 64-bit object file look sane:

Value   Size Type    Bind   Vis      Ndx Name
  0000  4096 OBJECT  GLOBAL DEFAULT   15 init_level4_pgt
  1000  4096 OBJECT  GLOBAL DEFAULT   15 level3_kernel_pgt
  2000  2048 OBJECT  GLOBAL DEFAULT   15 level2_kernel_pgt
  3000  4096 OBJECT  GLOBAL DEFAULT   15 level2_fixmap_pgt
  4000  4096 OBJECT  GLOBAL DEFAULT   15 level1_fixmap_pgt
  5000     2 OBJECT  GLOBAL DEFAULT   15 early_gdt_descr
  5002     8 OBJECT  LOCAL  DEFAULT   15 early_gdt_descr_base
  500a     8 OBJECT  GLOBAL DEFAULT   15 phys_base
  0000     8 OBJECT  GLOBAL DEFAULT   17 initial_code
  0008     8 OBJECT  GLOBAL DEFAULT   17 initial_gs
  0010     8 OBJECT  GLOBAL DEFAULT   17 initial_stack
  0000     4 OBJECT  GLOBAL DEFAULT   19 early_recursion_flag
  1000  4096 OBJECT  GLOBAL DEFAULT   19 early_level4_pgt

2000 0x40000 OBJECT GLOBAL DEFAULT 19 early_dynamic_pgts
0000 4096 OBJECT GLOBAL DEFAULT 22 empty_zero_page

All have correct size and type now.

Note that the patch removes implicit 16B alignment previously inserted by ENTRY:
* initial_code, setup_once_ref, initial_page_table, initial_stack, boot_gdt are still aligned
* early_gdt_descr is now properly aligned as was intended before ENTRY was added there long time ago
* phys_base's alignment is kept by an explicitly added new alignment

Cc Thomas Gleixner <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>

---

Notes:
[v9] preserve phys_base's alignment

 arch/x86/kernel/head_32.S | 35 ++++++++--------
 arch/x86/kernel/head_64.S | 87 +++++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 57 deletions(-)
arch/x86/kernel/head_32.S +18 -17
index aec1fdb80221..e2b3e6cf86ca 100644
@@ -502,15 +502,12 @@ ENDPROC(early_ignore_irq)
 
 __INITDATA
 	.align 4
-GLOBAL(early_recursion_flag)
-	.long 0
+SYM_DATA(early_recursion_flag, .long 0)
 
 __REFDATA
 	.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
-ENTRY(setup_once_ref)
-	.long setup_once
+SYM_DATA(initial_code,		.long i386_start_kernel)
+SYM_DATA(setup_once_ref,	.long setup_once)
 
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 #define	PGD_ALIGN	(2 * PAGE_SIZE)
@@ -553,7 +550,7 @@ EXPORT_SYMBOL(empty_zero_page)
 __PAGE_ALIGNED_DATA
 	/* Page-aligned for the benefit of paravirt? */
 	.align PGD_ALIGN
-ENTRY(initial_page_table)
+SYM_DATA_START(initial_page_table)
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0	/* low identity map */
 # if KPMDS == 3
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0
@@ -571,17 +568,18 @@ ENTRY(initial_page_table)
 #  error "Kernel PMDs should be 1, 2 or 3"
 # endif
 	.align PAGE_SIZE		/* needs to be page-sized too */
+SYM_DATA_END(initial_page_table)
 #endif
 
 .data
 .balign 4
-ENTRY(initial_stack)
-	/*
-	 * The SIZEOF_PTREGS gap is a convention which helps the in-kernel
-	 * unwinder reliably detect the end of the stack.
-	 */
-	.long init_thread_union + THREAD_SIZE - SIZEOF_PTREGS - \
-	      TOP_OF_KERNEL_STACK_PADDING;
+/*
+ * The SIZEOF_PTREGS gap is a convention which helps the in-kernel unwinder
+ * reliably detect the end of the stack.
+ */
+SYM_DATA(initial_stack,
+		.long init_thread_union + THREAD_SIZE -
+		SIZEOF_PTREGS - TOP_OF_KERNEL_STACK_PADDING)
 
 __INITRODATA
 int_msg:
@@ -600,22 +598,25 @@ int_msg:
 	ALIGN
 # early boot GDT descriptor (must use 1:1 address mapping)
 	.word 0				# 32 bit align gdt_desc.address
-boot_gdt_descr:
+SYM_DATA_START_LOCAL(boot_gdt_descr)
 	.word __BOOT_DS+7
 	.long boot_gdt - __PAGE_OFFSET
+SYM_DATA_END(boot_gdt_descr)
 
 # boot GDT descriptor (later on used by CPU#0):
 	.word 0				# 32 bit align gdt_desc.address
-ENTRY(early_gdt_descr)
+SYM_DATA_START(early_gdt_descr)
 	.word GDT_ENTRIES*8-1
 	.long gdt_page			/* Overwritten for secondary CPUs */
+SYM_DATA_END(early_gdt_descr)
 
 /*
  * The boot_gdt must mirror the equivalent in setup.S and is
  * used only for booting.
  */
 	.align L1_CACHE_BYTES
-ENTRY(boot_gdt)
+SYM_DATA_START(boot_gdt)
 	.fill GDT_ENTRY_BOOT_CS,8,0
 	.quad 0x00cf9a000000ffff	/* kernel 4GB code at 0x00000000 */
 	.quad 0x00cf92000000ffff	/* kernel 4GB data at 0x00000000 */
+SYM_DATA_END(boot_gdt)
arch/x86/kernel/head_64.S +47 -40

178 lines not on this page · raw message

Signature · 1 line
2.23.0
merge bot Applied
#27 lore raw

[tip: x86/asm] x86/asm/head: Annotate data appropriately

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     b1bd27b9ad45d77a2924e2168c6982c8ff1d8083
Gitweb:        https://git.kernel.org/tip/b1bd27b9ad45d77a2924e2168c6982c8ff1d8083
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:51 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:42:01 +02:00

x86/asm/head: Annotate data appropriately

Use the new SYM_DATA, SYM_DATA_START, and SYM_DATA_END in both 32 and 64 bit head_*.S. In the 64-bit version, define also SYM_DATA_START_PAGE_ALIGNED locally using the new SYM_START. It is used in the code instead of NEXT_PAGE() which was defined in this file and had been using the obsolete macro GLOBAL().

Now, the data in the 64-bit object file look sane:

  Value   Size Type    Bind   Vis      Ndx Name
    0000  4096 OBJECT  GLOBAL DEFAULT   15 init_level4_pgt
    1000  4096 OBJECT  GLOBAL DEFAULT   15 level3_kernel_pgt
    2000  2048 OBJECT  GLOBAL DEFAULT   15 level2_kernel_pgt
    3000  4096 OBJECT  GLOBAL DEFAULT   15 level2_fixmap_pgt
    4000  4096 OBJECT  GLOBAL DEFAULT   15 level1_fixmap_pgt
    5000     2 OBJECT  GLOBAL DEFAULT   15 early_gdt_descr
    5002     8 OBJECT  LOCAL  DEFAULT   15 early_gdt_descr_base
    500a     8 OBJECT  GLOBAL DEFAULT   15 phys_base
    0000     8 OBJECT  GLOBAL DEFAULT   17 initial_code
    0008     8 OBJECT  GLOBAL DEFAULT   17 initial_gs
    0010     8 OBJECT  GLOBAL DEFAULT   17 initial_stack
    0000     4 OBJECT  GLOBAL DEFAULT   19 early_recursion_flag
    1000  4096 OBJECT  GLOBAL DEFAULT   19 early_level4_pgt

2000 0x40000 OBJECT GLOBAL DEFAULT 19 early_dynamic_pgts
0000 4096 OBJECT GLOBAL DEFAULT 22 empty_zero_page

All have correct size and type now.

Note that this also removes implicit 16B alignment previously inserted by ENTRY:

* initial_code, setup_once_ref, initial_page_table, initial_stack, boot_gdt are still aligned
* early_gdt_descr is now properly aligned as was intended before ENTRY was added there long time ago
* phys_base's alignment is kept by an explicitly added new alignment

Cc Andy Lutomirski <[email protected]>
Cc Cao jin <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Maran Wilson <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/kernel/head_32.S | 35 +++++++--------
 arch/x86/kernel/head_64.S | 87 ++++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 57 deletions(-)
arch/x86/kernel/head_32.S +18 -17
index aec1fdb..e2b3e6c 100644
@@ -502,15 +502,12 @@ ENDPROC(early_ignore_irq)
 
 __INITDATA
 	.align 4
-GLOBAL(early_recursion_flag)
-	.long 0
+SYM_DATA(early_recursion_flag, .long 0)
 
 __REFDATA
 	.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
-ENTRY(setup_once_ref)
-	.long setup_once
+SYM_DATA(initial_code,		.long i386_start_kernel)
+SYM_DATA(setup_once_ref,	.long setup_once)
 
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 #define	PGD_ALIGN	(2 * PAGE_SIZE)
@@ -553,7 +550,7 @@ EXPORT_SYMBOL(empty_zero_page)
 __PAGE_ALIGNED_DATA
 	/* Page-aligned for the benefit of paravirt? */
 	.align PGD_ALIGN
-ENTRY(initial_page_table)
+SYM_DATA_START(initial_page_table)
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0	/* low identity map */
 # if KPMDS == 3
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0
@@ -571,17 +568,18 @@ ENTRY(initial_page_table)
 #  error "Kernel PMDs should be 1, 2 or 3"
 # endif
 	.align PAGE_SIZE		/* needs to be page-sized too */
+SYM_DATA_END(initial_page_table)
 #endif
 
 .data
 .balign 4
-ENTRY(initial_stack)
-	/*
-	 * The SIZEOF_PTREGS gap is a convention which helps the in-kernel
-	 * unwinder reliably detect the end of the stack.
-	 */
-	.long init_thread_union + THREAD_SIZE - SIZEOF_PTREGS - \
-	      TOP_OF_KERNEL_STACK_PADDING;
+/*
+ * The SIZEOF_PTREGS gap is a convention which helps the in-kernel unwinder
+ * reliably detect the end of the stack.
+ */
+SYM_DATA(initial_stack,
+		.long init_thread_union + THREAD_SIZE -
+		SIZEOF_PTREGS - TOP_OF_KERNEL_STACK_PADDING)
 
 __INITRODATA
 int_msg:
@@ -600,22 +598,25 @@ int_msg:
 	ALIGN
 # early boot GDT descriptor (must use 1:1 address mapping)
 	.word 0				# 32 bit align gdt_desc.address
-boot_gdt_descr:
+SYM_DATA_START_LOCAL(boot_gdt_descr)
 	.word __BOOT_DS+7
 	.long boot_gdt - __PAGE_OFFSET
+SYM_DATA_END(boot_gdt_descr)
 
 # boot GDT descriptor (later on used by CPU#0):
 	.word 0				# 32 bit align gdt_desc.address
-ENTRY(early_gdt_descr)
+SYM_DATA_START(early_gdt_descr)
 	.word GDT_ENTRIES*8-1
 	.long gdt_page			/* Overwritten for secondary CPUs */
+SYM_DATA_END(early_gdt_descr)
 
 /*
  * The boot_gdt must mirror the equivalent in setup.S and is
  * used only for booting.
  */
 	.align L1_CACHE_BYTES
-ENTRY(boot_gdt)
+SYM_DATA_START(boot_gdt)
 	.fill GDT_ENTRY_BOOT_CS,8,0
 	.quad 0x00cf9a000000ffff	/* kernel 4GB code at 0x00000000 */
 	.quad 0x00cf92000000ffff	/* kernel 4GB data at 0x00000000 */
+SYM_DATA_END(boot_gdt)
arch/x86/kernel/head_64.S +47 -40

178 lines not on this page · raw message

author
#28 lore raw

PATCH v9 12/28 x86/boot: Annotate data appropriately

In reply to Jiri Slaby

Use the new SYM_DATA, SYM_DATA_START, and SYM_DATA_END* macros for data, so that the data in the object file look sane:

Value   Size Type    Bind   Vis      Ndx Name
  0000    10 OBJECT  GLOBAL DEFAULT    3 efi32_boot_gdt
  000a    10 OBJECT  LOCAL  DEFAULT    3 save_gdt
  0014     8 OBJECT  LOCAL  DEFAULT    3 func_rt_ptr
  001c    48 OBJECT  GLOBAL DEFAULT    3 efi_gdt64
  004c     0 OBJECT  LOCAL  DEFAULT    3 efi_gdt64_end
  0000    48 OBJECT  LOCAL  DEFAULT    3 gdt
  0030     0 OBJECT  LOCAL  DEFAULT    3 gdt_end
  0030     8 OBJECT  LOCAL  DEFAULT    3 efi_config
  0038    49 OBJECT  GLOBAL DEFAULT    3 efi32_config
  0069    49 OBJECT  GLOBAL DEFAULT    3 efi64_config

All have correct size and type now.

Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>

---

Notes:
[v9] .Lwakeup_idt handled in this patch too

 arch/x86/boot/compressed/efi_thunk_64.S | 21 +++++++++-------
 arch/x86/boot/compressed/head_64.S      | 32 ++++++++++++-------------
 arch/x86/boot/compressed/mem_encrypt.S  |  3 +--
 arch/x86/realmode/rm/wakeup_asm.S       |  4 ++--
 4 files changed, 30 insertions(+), 30 deletions(-)
arch/x86/boot/compressed/efi_thunk_64.S +12 -9
index bff9ab7c6317..d66000d23921 100644
@@ -176,16 +176,19 @@ ENDPROC(efi_enter32)
 
 	.data
 	.balign	8
-	.global	efi32_boot_gdt
-efi32_boot_gdt:	.word	0
-		.quad	0
+SYM_DATA_START(efi32_boot_gdt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_gdt)
+
+SYM_DATA_START_LOCAL(save_gdt)
+	.word	0
+	.quad	0
+SYM_DATA_END(save_gdt)
 
-save_gdt:	.word	0
-		.quad	0
-func_rt_ptr:	.quad	0
+SYM_DATA_LOCAL(func_rt_ptr, .quad 0)
 
-	.global efi_gdt64
-efi_gdt64:
+SYM_DATA_START(efi_gdt64)
 	.word	efi_gdt64_end - efi_gdt64
 	.long	0			/* Filled out by user */
 	.word	0
@@ -194,4 +197,4 @@ efi_gdt64:
 	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
 	.quad	0x0080890000000000	/* TS descriptor */
 	.quad   0x0000000000000000	/* TS continued */
-efi_gdt64_end:
+SYM_DATA_END_LABEL(efi_gdt64, SYM_L_LOCAL, efi_gdt64_end)
arch/x86/boot/compressed/head_64.S +15 -17
index 7afe6e067066..ca762ea6a681 100644
@@ -659,11 +659,12 @@ SYM_FUNC_END(.Lno_longmode)
 #include "../../kernel/verify_cpu.S"
 
 	.data
-gdt64:
+SYM_DATA_START_LOCAL(gdt64)
 	.word	gdt_end - gdt
 	.quad   0
+SYM_DATA_END(gdt64)
 	.balign	8
-gdt:
+SYM_DATA_START_LOCAL(gdt)
 	.word	gdt_end - gdt
 	.long	gdt
 	.word	0
@@ -672,25 +673,24 @@ gdt:
 	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
 	.quad	0x0080890000000000	/* TS descriptor */
 	.quad   0x0000000000000000	/* TS continued */
-gdt_end:
+SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
 
 #ifdef CONFIG_EFI_STUB
-efi_config:
-	.quad	0
+SYM_DATA_LOCAL(efi_config, .quad 0)
 
 #ifdef CONFIG_EFI_MIXED
-	.global efi32_config
-efi32_config:
+SYM_DATA_START(efi32_config)
 	.fill	5,8,0
 	.quad	efi64_thunk
 	.byte	0
+SYM_DATA_END(efi32_config)
 #endif
 
-	.global efi64_config
-efi64_config:
+SYM_DATA_START(efi64_config)
 	.fill	5,8,0
 	.quad	efi_call
 	.byte	1
+SYM_DATA_END(efi64_config)
 #endif /* CONFIG_EFI_STUB */
 
 /*
@@ -698,23 +698,21 @@ efi64_config:
  */
 	.bss
 	.balign 4
-boot_heap:
-	.fill BOOT_HEAP_SIZE, 1, 0
-boot_stack:
+SYM_DATA_LOCAL(boot_heap,	.fill BOOT_HEAP_SIZE, 1, 0)
+
+SYM_DATA_START_LOCAL(boot_stack)
 	.fill BOOT_STACK_SIZE, 1, 0
-boot_stack_end:
+SYM_DATA_END_LABEL(boot_stack, SYM_L_LOCAL, boot_stack_end)
 
 /*
  * Space for page tables (not in .bss so not zeroed)
  */
 	.section ".pgtable","a",@nobits
 	.balign 4096
-pgtable:
-	.fill BOOT_PGT_SIZE, 1, 0
+SYM_DATA_LOCAL(pgtable,		.fill BOOT_PGT_SIZE, 1, 0)
 
 /*
  * The page table is going to be used instead of page table in the trampoline
  * memory.
  */
-top_pgtable:
-	.fill PAGE_SIZE, 1, 0
+SYM_DATA_LOCAL(top_pgtable,	.fill PAGE_SIZE, 1, 0)
arch/x86/boot/compressed/mem_encrypt.S +1 -2
index 6afb7130a387..28d703cad310 100644
@@ -96,6 +96,5 @@ ENDPROC(set_sev_encryption_mask)
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	.balign	8
-GLOBAL(sme_me_mask)
-	.quad	0
+SYM_DATA(sme_me_mask, .quad 0)
 #endif
arch/x86/realmode/rm/wakeup_asm.S +2 -2
index dad6198f1a26..08438ee539bc 100644
@@ -171,8 +171,8 @@ END(wakeup_gdt)
 
 	/* This is the standard real-mode IDT */
 	.balign	16
-.Lwakeup_idt:
+SYM_DATA_START_LOCAL(.Lwakeup_idt)
 	.word	0xffff		/* limit */
 	.long	0		/* address */
 	.word	0
-END(.Lwakeup_idt)
+SYM_DATA_END(.Lwakeup_idt)
Signature · 1 line
2.23.0
merge bot Applied
#29 lore raw

[tip: x86/asm] x86/boot: Annotate data appropriately

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     b8c3f9b554e8bd0edb434a54d0dc48e3d9eb6edd
Gitweb:        https://git.kernel.org/tip/b8c3f9b554e8bd0edb434a54d0dc48e3d9eb6edd
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:52 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:43:26 +02:00

x86/boot: Annotate data appropriately

Use the new SYM_DATA, SYM_DATA_START, and SYM_DATA_END* macros for data, so that the data in the object file look sane:

  Value   Size Type    Bind   Vis      Ndx Name
    0000    10 OBJECT  GLOBAL DEFAULT    3 efi32_boot_gdt
    000a    10 OBJECT  LOCAL  DEFAULT    3 save_gdt
    0014     8 OBJECT  LOCAL  DEFAULT    3 func_rt_ptr
    001c    48 OBJECT  GLOBAL DEFAULT    3 efi_gdt64
    004c     0 OBJECT  LOCAL  DEFAULT    3 efi_gdt64_end
    0000    48 OBJECT  LOCAL  DEFAULT    3 gdt
    0030     0 OBJECT  LOCAL  DEFAULT    3 gdt_end
    0030     8 OBJECT  LOCAL  DEFAULT    3 efi_config
    0038    49 OBJECT  GLOBAL DEFAULT    3 efi32_config
    0069    49 OBJECT  GLOBAL DEFAULT    3 efi64_config

All have correct size and type now.

Cc Allison Randal <[email protected]>
Cc Cao jin <[email protected]>
Cc Enrico Weigelt <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Kate Stewart <[email protected]>
Cc "Kirill A. Shutemov" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Wei Huang <[email protected]>
Cc x86-ml <[email protected]>
Cc Xiaoyao Li <[email protected]>
---
 arch/x86/boot/compressed/efi_thunk_64.S | 21 +++++++++-------
 arch/x86/boot/compressed/head_64.S      | 32 +++++++++++-------------
 arch/x86/boot/compressed/mem_encrypt.S  |  3 +--
 arch/x86/realmode/rm/wakeup_asm.S       |  4 +--
 4 files changed, 30 insertions(+), 30 deletions(-)
arch/x86/boot/compressed/efi_thunk_64.S +12 -9
index bff9ab7..d66000d 100644
@@ -176,16 +176,19 @@ ENDPROC(efi_enter32)
 
 	.data
 	.balign	8
-	.global	efi32_boot_gdt
-efi32_boot_gdt:	.word	0
-		.quad	0
+SYM_DATA_START(efi32_boot_gdt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_gdt)
+
+SYM_DATA_START_LOCAL(save_gdt)
+	.word	0
+	.quad	0
+SYM_DATA_END(save_gdt)
 
-save_gdt:	.word	0
-		.quad	0
-func_rt_ptr:	.quad	0
+SYM_DATA_LOCAL(func_rt_ptr, .quad 0)
 
-	.global efi_gdt64
-efi_gdt64:
+SYM_DATA_START(efi_gdt64)
 	.word	efi_gdt64_end - efi_gdt64
 	.long	0			/* Filled out by user */
 	.word	0
@@ -194,4 +197,4 @@ efi_gdt64:
 	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
 	.quad	0x0080890000000000	/* TS descriptor */
 	.quad   0x0000000000000000	/* TS continued */
-efi_gdt64_end:
+SYM_DATA_END_LABEL(efi_gdt64, SYM_L_LOCAL, efi_gdt64_end)
arch/x86/boot/compressed/head_64.S +15 -17
index 7afe6e0..ca762ea 100644
@@ -659,11 +659,12 @@ SYM_FUNC_END(.Lno_longmode)
 #include "../../kernel/verify_cpu.S"
 
 	.data
-gdt64:
+SYM_DATA_START_LOCAL(gdt64)
 	.word	gdt_end - gdt
 	.quad   0
+SYM_DATA_END(gdt64)
 	.balign	8
-gdt:
+SYM_DATA_START_LOCAL(gdt)
 	.word	gdt_end - gdt
 	.long	gdt
 	.word	0
@@ -672,25 +673,24 @@ gdt:
 	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
 	.quad	0x0080890000000000	/* TS descriptor */
 	.quad   0x0000000000000000	/* TS continued */
-gdt_end:
+SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
 
 #ifdef CONFIG_EFI_STUB
-efi_config:
-	.quad	0
+SYM_DATA_LOCAL(efi_config, .quad 0)
 
 #ifdef CONFIG_EFI_MIXED
-	.global efi32_config
-efi32_config:
+SYM_DATA_START(efi32_config)
 	.fill	5,8,0
 	.quad	efi64_thunk
 	.byte	0
+SYM_DATA_END(efi32_config)
 #endif
 
-	.global efi64_config
-efi64_config:
+SYM_DATA_START(efi64_config)
 	.fill	5,8,0
 	.quad	efi_call
 	.byte	1
+SYM_DATA_END(efi64_config)
 #endif /* CONFIG_EFI_STUB */
 
 /*
@@ -698,23 +698,21 @@ efi64_config:
  */
 	.bss
 	.balign 4
-boot_heap:
-	.fill BOOT_HEAP_SIZE, 1, 0
-boot_stack:
+SYM_DATA_LOCAL(boot_heap,	.fill BOOT_HEAP_SIZE, 1, 0)
+
+SYM_DATA_START_LOCAL(boot_stack)
 	.fill BOOT_STACK_SIZE, 1, 0
-boot_stack_end:
+SYM_DATA_END_LABEL(boot_stack, SYM_L_LOCAL, boot_stack_end)
 
 /*
  * Space for page tables (not in .bss so not zeroed)
  */
 	.section ".pgtable","a",@nobits
 	.balign 4096
-pgtable:
-	.fill BOOT_PGT_SIZE, 1, 0
+SYM_DATA_LOCAL(pgtable,		.fill BOOT_PGT_SIZE, 1, 0)
 
 /*
  * The page table is going to be used instead of page table in the trampoline
  * memory.
  */
-top_pgtable:
-	.fill PAGE_SIZE, 1, 0
+SYM_DATA_LOCAL(top_pgtable,	.fill PAGE_SIZE, 1, 0)
arch/x86/boot/compressed/mem_encrypt.S +1 -2
index 6afb713..28d703c 100644
@@ -96,6 +96,5 @@ ENDPROC(set_sev_encryption_mask)
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	.balign	8
-GLOBAL(sme_me_mask)
-	.quad	0
+SYM_DATA(sme_me_mask, .quad 0)
 #endif
arch/x86/realmode/rm/wakeup_asm.S +2 -2
index dad6198..08438ee 100644
@@ -171,8 +171,8 @@ END(wakeup_gdt)
 
 	/* This is the standard real-mode IDT */
 	.balign	16
-.Lwakeup_idt:
+SYM_DATA_START_LOCAL(.Lwakeup_idt)
 	.word	0xffff		/* limit */
 	.long	0		/* address */
 	.word	0
-END(.Lwakeup_idt)
+SYM_DATA_END(.Lwakeup_idt)
author
#30 lore raw

PATCH v9 13/28 um: Annotate data appropriately

In reply to Jiri Slaby

Use the new SYM_DATA_START and SYM_DATA_END_LABEL macros for vdso_start.

We get:

  0000  2376 OBJECT  GLOBAL DEFAULT    4 vdso_start
  0948     0 OBJECT  GLOBAL DEFAULT    4 vdso_end
Cc Jeff Dike <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/um/vdso/vdso.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/um/vdso/vdso.S +3 -3
index a4a3870dc059..a6eaf293a73b 100644
@@ -1,11 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/init.h>
+#include <linux/linkage.h>
 
 __INITDATA
 
-	.globl vdso_start, vdso_end
-vdso_start:
+SYM_DATA_START(vdso_start)
 	.incbin "arch/x86/um/vdso/vdso.so"
-vdso_end:
+SYM_DATA_END_LABEL(vdso_start, SYM_L_GLOBAL, vdso_end)
 
 __FINIT
Signature · 1 line
2.23.0
maintainer Acked-by on v9 13/28
#31 lore raw

Re: [PATCH v9 13/28] um: Annotate data appropriately

----- Ursprüngliche Mail -----

Quoted 43 lines

Von: "Jiri Slaby" <[email protected]>
An: [email protected]
CC: [email protected], [email protected], [email protected], [email protected], [email protected], "linux-kernel" <[email protected]>, "Jiri Slaby" <[email protected]>, "Jeff Dike" <[email protected]>, "richard" <[email protected]>, [email protected], [email protected]
Gesendet: Freitag, 11. Oktober 2019 13:50:53
Betreff: [PATCH v9 13/28] um: Annotate data appropriately

Use the new SYM_DATA_START and SYM_DATA_END_LABEL macros for vdso_start.

We get:

 0000  2376 OBJECT  GLOBAL DEFAULT    4 vdso_start
 0948     0 OBJECT  GLOBAL DEFAULT    4 vdso_end
Cc Jeff Dike <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>

---
arch/x86/um/vdso/vdso.S | 6 +++---

1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/um/vdso/vdso.S +1 -0
index a4a3870dc059..a6eaf293a73b 100644
@@ -1,11 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/init.h>
+#include <linux/linkage.h>
 

__INITDATA

arch/x86/um/vdso/vdso.S +1 -2
-	.globl vdso_start, vdso_end
-vdso_start:
+SYM_DATA_START(vdso_start)
	.incbin "arch/x86/um/vdso/vdso.so"

arch/x86/um/vdso/vdso.S line 9

Quoted 2 lines
arch/x86/um/vdso/vdso.S +1 -1
-vdso_end:
+SYM_DATA_END_LABEL(vdso_start, SYM_L_GLOBAL, vdso_end)

Thanks,
//richard

merge bot Applied
#32 lore raw

[tip: x86/asm] x86/um: Annotate data appropriately

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     773a37b182259f5e0cdb928112431b119a6e4500
Gitweb:        https://git.kernel.org/tip/773a37b182259f5e0cdb928112431b119a6e4500
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:53 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:45:03 +02:00

x86/um: Annotate data appropriately

Use the new SYM_DATA_START and SYM_DATA_END_LABEL macros for vdso_start.

Result is:

  0000  2376 OBJECT  GLOBAL DEFAULT    4 vdso_start
  0948     0 OBJECT  GLOBAL DEFAULT    4 vdso_end
---
 arch/x86/um/vdso/vdso.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/um/vdso/vdso.S +3 -3
index a4a3870..a6eaf29 100644
@@ -1,11 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/init.h>
+#include <linux/linkage.h>
 
 __INITDATA
 
-	.globl vdso_start, vdso_end
-vdso_start:
+SYM_DATA_START(vdso_start)
 	.incbin "arch/x86/um/vdso/vdso.so"
-vdso_end:
+SYM_DATA_END_LABEL(vdso_start, SYM_L_GLOBAL, vdso_end)
 
 __FINIT
author
#33 lore raw

PATCH v9 14/28 xen/pvh: Annotate data appropriately

In reply to Jiri Slaby

Use the new SYM_DATA_START_LOCAL, and SYM_DATA_END* macros to have:

  0000     8 OBJECT  LOCAL  DEFAULT    6 gdt
  0008    32 OBJECT  LOCAL  DEFAULT    6 gdt_start
  0028     0 OBJECT  LOCAL  DEFAULT    6 gdt_end
  0028   256 OBJECT  LOCAL  DEFAULT    6 early_stack
  0128     0 OBJECT  LOCAL  DEFAULT    6 early_stack
Cc Boris Ostrovsky <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/platform/pvh/head.S | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
arch/x86/platform/pvh/head.S +7 -7
index 1f8825bbaffb..4e63480bb223 100644
@@ -150,11 +150,12 @@ END(pvh_start_xen)
 
 	.section ".init.data","aw"
 	.balign 8
-gdt:
+SYM_DATA_START_LOCAL(gdt)
 	.word gdt_end - gdt_start
 	.long _pa(gdt_start)
 	.word 0
-gdt_start:
+SYM_DATA_END(gdt)
+SYM_DATA_START_LOCAL(gdt_start)
 	.quad 0x0000000000000000            /* NULL descriptor */
 #ifdef CONFIG_X86_64
 	.quad GDT_ENTRY(0xa09a, 0, 0xfffff) /* PVH_CS_SEL */
@@ -163,15 +164,14 @@ gdt_start:
 #endif
 	.quad GDT_ENTRY(0xc092, 0, 0xfffff) /* PVH_DS_SEL */
 	.quad GDT_ENTRY(0x4090, 0, 0x18)    /* PVH_CANARY_SEL */
-gdt_end:
+SYM_DATA_END_LABEL(gdt_start, SYM_L_LOCAL, gdt_end)
 
 	.balign 16
-canary:
-	.fill 48, 1, 0
+SYM_DATA_LOCAL(canary, .fill 48, 1, 0)
 
-early_stack:
+SYM_DATA_START_LOCAL(early_stack)
 	.fill BOOT_STACK_SIZE, 1, 0
-early_stack_end:
+SYM_DATA_END_LABEL(early_stack, SYM_L_LOCAL, early_stack_end)
 
 	ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY,
 	             _ASM_PTR (pvh_start_xen - __START_KERNEL_map))
Signature · 1 line
2.23.0
merge bot Applied
#34 lore raw

[tip: x86/asm] xen/pvh: Annotate data appropriately

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     1de5bdce0c3f8294d0aabc48fb5497814589422f
Gitweb:        https://git.kernel.org/tip/1de5bdce0c3f8294d0aabc48fb5497814589422f
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:54 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:46:06 +02:00

xen/pvh: Annotate data appropriately

Use the new SYM_DATA_START_LOCAL, and SYM_DATA_END* macros to get:

  0000     8 OBJECT  LOCAL  DEFAULT    6 gdt
  0008    32 OBJECT  LOCAL  DEFAULT    6 gdt_start
  0028     0 OBJECT  LOCAL  DEFAULT    6 gdt_end
  0028   256 OBJECT  LOCAL  DEFAULT    6 early_stack
  0128     0 OBJECT  LOCAL  DEFAULT    6 early_stack
---
 arch/x86/platform/pvh/head.S | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
arch/x86/platform/pvh/head.S +7 -7
index 1f8825b..4e63480 100644
@@ -150,11 +150,12 @@ END(pvh_start_xen)
 
 	.section ".init.data","aw"
 	.balign 8
-gdt:
+SYM_DATA_START_LOCAL(gdt)
 	.word gdt_end - gdt_start
 	.long _pa(gdt_start)
 	.word 0
-gdt_start:
+SYM_DATA_END(gdt)
+SYM_DATA_START_LOCAL(gdt_start)
 	.quad 0x0000000000000000            /* NULL descriptor */
 #ifdef CONFIG_X86_64
 	.quad GDT_ENTRY(0xa09a, 0, 0xfffff) /* PVH_CS_SEL */
@@ -163,15 +164,14 @@ gdt_start:
 #endif
 	.quad GDT_ENTRY(0xc092, 0, 0xfffff) /* PVH_DS_SEL */
 	.quad GDT_ENTRY(0x4090, 0, 0x18)    /* PVH_CANARY_SEL */
-gdt_end:
+SYM_DATA_END_LABEL(gdt_start, SYM_L_LOCAL, gdt_end)
 
 	.balign 16
-canary:
-	.fill 48, 1, 0
+SYM_DATA_LOCAL(canary, .fill 48, 1, 0)
 
-early_stack:
+SYM_DATA_START_LOCAL(early_stack)
 	.fill BOOT_STACK_SIZE, 1, 0
-early_stack_end:
+SYM_DATA_END_LABEL(early_stack, SYM_L_LOCAL, early_stack_end)
 
 	ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY,
 	             _ASM_PTR (pvh_start_xen - __START_KERNEL_map))

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

author
#35 lore raw

PATCH v9 15/28 x86/asm/purgatory: Start using annotations

In reply to Jiri Slaby

Purgatory used no annotations at all. So include linux/linkage.h and annotate everything:
* code by SYM_CODE_*
* data by SYM_DATA_*

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/purgatory/entry64.S      | 21 ++++++++++++---------
 arch/x86/purgatory/setup-x86_64.S | 14 ++++++++------
 arch/x86/purgatory/stack.S        |  7 ++++---
 3 files changed, 24 insertions(+), 18 deletions(-)
arch/x86/purgatory/entry64.S +12 -9
index 275a646d1048..9d73d3648aa6 100644
@@ -8,13 +8,13 @@
  * This code has been taken from kexec-tools.
  */
 
+#include <linux/linkage.h>
+
 	.text
 	.balign 16
 	.code64
-	.globl entry64, entry64_regs
-
 
-entry64:
+SYM_CODE_START(entry64)
 	/* Setup a gdt that should be preserved */
 	lgdt gdt(%rip)
 
@@ -54,10 +54,11 @@ new_cs_exit:
 
 	/* Jump to the new code... */
 	jmpq	*rip(%rip)
+SYM_CODE_END(entry64)
 
 	.section ".rodata"
 	.balign 4
-entry64_regs:
+SYM_DATA_START(entry64_regs)
 rax:	.quad 0x0
 rcx:	.quad 0x0
 rdx:	.quad 0x0
@@ -75,12 +76,12 @@ r13:	.quad 0x0
 r14:	.quad 0x0
 r15:	.quad 0x0
 rip:	.quad 0x0
-	.size entry64_regs, . - entry64_regs
+SYM_DATA_END(entry64_regs)
 
 	/* GDT */
 	.section ".rodata"
 	.balign 16
-gdt:
+SYM_DATA_START_LOCAL(gdt)
 	/* 0x00 unusable segment
 	 * 0x08 unused
 	 * so use them as gdt ptr
@@ -94,6 +95,8 @@ gdt:
 
 	/* 0x18 4GB flat data segment */
 	.word 0xFFFF, 0x0000, 0x9200, 0x00CF
-gdt_end:
-stack:	.quad   0, 0
-stack_init:
+SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
+
+SYM_DATA_START_LOCAL(stack)
+	.quad   0, 0
+SYM_DATA_END_LABEL(stack, SYM_L_LOCAL, stack_init)
arch/x86/purgatory/setup-x86_64.S +8 -6
index 321146be741d..89d9e9e53fcd 100644
@@ -7,14 +7,14 @@
  *
  * This code has been taken from kexec-tools.
  */
+#include <linux/linkage.h>
 #include <asm/purgatory.h>
 
 	.text
-	.globl purgatory_start
 	.balign 16
-purgatory_start:
 	.code64
 
+SYM_CODE_START(purgatory_start)
 	/* Load a gdt so I know what the segment registers are */
 	lgdt	gdt(%rip)
 
@@ -32,10 +32,12 @@ purgatory_start:
 	/* Call the C code */
 	call purgatory
 	jmp	entry64
+SYM_CODE_END(purgatory_start)
 
 	.section ".rodata"
 	.balign 16
-gdt:	/* 0x00 unusable segment
+SYM_DATA_START_LOCAL(gdt)
+	/* 0x00 unusable segment
 	 * 0x08 unused
 	 * so use them as the gdt ptr
 	 */
@@ -48,10 +50,10 @@ gdt:	/* 0x00 unusable segment
 
 	/* 0x18 4GB flat data segment */
 	.word	0xFFFF, 0x0000, 0x9200, 0x00CF
-gdt_end:
+SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
 
 	.bss
 	.balign 4096
-lstack:
+SYM_DATA_START_LOCAL(lstack)
 	.skip 4096
-lstack_end:
+SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
arch/x86/purgatory/stack.S +4 -3
index 8b1427422dfc..1ef507ca50a5 100644
@@ -5,13 +5,14 @@
  * Copyright (C) 2014 Red Hat Inc.
  */
 
+#include <linux/linkage.h>
+
 	/* A stack for the loaded kernel.
 	 * Separate and in the data section so it can be prepopulated.
 	 */
 	.data
 	.balign 4096
-	.globl stack, stack_end
 
-stack:
+SYM_DATA_START(stack)
 	.skip 4096
-stack_end:
+SYM_DATA_END_LABEL(stack, SYM_L_GLOBAL, stack_end)
Signature · 1 line
2.23.0
maintainer
#36 lore raw

Re: [PATCH v9 15/28] x86/asm/purgatory: Start using annotations

Quoted 16 lines · Jiri Slaby

Purgatory used no annotations at all. So include linux/linkage.h and annotate everything:
* code by SYM_CODE_*
* data by SYM_DATA_*

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/purgatory/entry64.S      | 21 ++++++++++++---------
 arch/x86/purgatory/setup-x86_64.S | 14 ++++++++------
 arch/x86/purgatory/stack.S        |  7 ++++---
 3 files changed, 24 insertions(+), 18 deletions(-)

...

arch/x86/purgatory/entry64.S r13: .quad 0x0 · line 85

Quoted 13 lines
arch/x86/purgatory/entry64.S +2 -2
@@ -75,12 +76,12 @@ r13:	.quad 0x0
 r14:	.quad 0x0
 r15:	.quad 0x0
 rip:	.quad 0x0
-	.size entry64_regs, . - entry64_regs
+SYM_DATA_END(entry64_regs)
 
 	/* GDT */
 	.section ".rodata"
 	.balign 16
-gdt:
+SYM_DATA_START_LOCAL(gdt)
 	/* 0x00 unusable segment

Note for the applier: Fixup that comment:

/*
* 0x00 ...
* ...

Quoted 2 lines
arch/x86/purgatory/entry64.S +0 -0
 	 * 0x08 unused
 	 * so use them as gdt ptr
Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
merge bot Applied
#37 lore raw

[tip: x86/asm] x86/asm/purgatory: Start using annotations

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     b16fed65a7938248c8b37d5d0a8020defa6fd926
Gitweb:        https://git.kernel.org/tip/b16fed65a7938248c8b37d5d0a8020defa6fd926
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:55 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 10:48:43 +02:00

x86/asm/purgatory: Start using annotations

Purgatory used no annotations at all. So include linux/linkage.h and annotate everything:

* code by SYM_CODE_*
* data by SYM_DATA_*

[ bp: Fixup comment in gdt: ]

Cc Alexios Zavras <[email protected]>
Cc Allison Randal <[email protected]>
Cc Enrico Weigelt <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/purgatory/entry64.S      | 24 ++++++++++++++----------
 arch/x86/purgatory/setup-x86_64.S | 14 ++++++++------
 arch/x86/purgatory/stack.S        |  7 ++++---
 3 files changed, 26 insertions(+), 19 deletions(-)
arch/x86/purgatory/entry64.S +14 -10
index 275a646..0b4390c 100644
@@ -8,13 +8,13 @@
  * This code has been taken from kexec-tools.
  */
 
+#include <linux/linkage.h>
+
 	.text
 	.balign 16
 	.code64
-	.globl entry64, entry64_regs
-
 
-entry64:
+SYM_CODE_START(entry64)
 	/* Setup a gdt that should be preserved */
 	lgdt gdt(%rip)
 
@@ -54,10 +54,11 @@ new_cs_exit:
 
 	/* Jump to the new code... */
 	jmpq	*rip(%rip)
+SYM_CODE_END(entry64)
 
 	.section ".rodata"
 	.balign 4
-entry64_regs:
+SYM_DATA_START(entry64_regs)
 rax:	.quad 0x0
 rcx:	.quad 0x0
 rdx:	.quad 0x0
@@ -75,13 +76,14 @@ r13:	.quad 0x0
 r14:	.quad 0x0
 r15:	.quad 0x0
 rip:	.quad 0x0
-	.size entry64_regs, . - entry64_regs
+SYM_DATA_END(entry64_regs)
 
 	/* GDT */
 	.section ".rodata"
 	.balign 16
-gdt:
-	/* 0x00 unusable segment
+SYM_DATA_START_LOCAL(gdt)
+	/*
+	 * 0x00 unusable segment
 	 * 0x08 unused
 	 * so use them as gdt ptr
 	 */
@@ -94,6 +96,8 @@ gdt:
 
 	/* 0x18 4GB flat data segment */
 	.word 0xFFFF, 0x0000, 0x9200, 0x00CF
-gdt_end:
-stack:	.quad   0, 0
-stack_init:
+SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
+
+SYM_DATA_START_LOCAL(stack)
+	.quad   0, 0
+SYM_DATA_END_LABEL(stack, SYM_L_LOCAL, stack_init)
arch/x86/purgatory/setup-x86_64.S +8 -6
index 321146b..89d9e9e 100644
@@ -7,14 +7,14 @@
  *
  * This code has been taken from kexec-tools.
  */
+#include <linux/linkage.h>
 #include <asm/purgatory.h>
 
 	.text
-	.globl purgatory_start
 	.balign 16
-purgatory_start:
 	.code64
 
+SYM_CODE_START(purgatory_start)
 	/* Load a gdt so I know what the segment registers are */
 	lgdt	gdt(%rip)
 
@@ -32,10 +32,12 @@ purgatory_start:
 	/* Call the C code */
 	call purgatory
 	jmp	entry64
+SYM_CODE_END(purgatory_start)
 
 	.section ".rodata"
 	.balign 16
-gdt:	/* 0x00 unusable segment
+SYM_DATA_START_LOCAL(gdt)
+	/* 0x00 unusable segment
 	 * 0x08 unused
 	 * so use them as the gdt ptr
 	 */
@@ -48,10 +50,10 @@ gdt:	/* 0x00 unusable segment
 
 	/* 0x18 4GB flat data segment */
 	.word	0xFFFF, 0x0000, 0x9200, 0x00CF
-gdt_end:
+SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end)
 
 	.bss
 	.balign 4096
-lstack:
+SYM_DATA_START_LOCAL(lstack)
 	.skip 4096
-lstack_end:
+SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
arch/x86/purgatory/stack.S +4 -3
index 8b14274..1ef507c 100644
@@ -5,13 +5,14 @@
  * Copyright (C) 2014 Red Hat Inc.
  */
 
+#include <linux/linkage.h>
+
 	/* A stack for the loaded kernel.
 	 * Separate and in the data section so it can be prepopulated.
 	 */
 	.data
 	.balign 4096
-	.globl stack, stack_end
 
-stack:
+SYM_DATA_START(stack)
 	.skip 4096
-stack_end:
+SYM_DATA_END_LABEL(stack, SYM_L_GLOBAL, stack_end)
author
#38 lore raw

PATCH v9 16/28 x86/asm: Do not annotate functions by GLOBAL

In reply to Jiri Slaby

GLOBAL is an x86's custom macro and is going to die very soon. It was meant for global symbols, but here, it was used for functions. Instead, use the new macros SYM_FUNC_START* and SYM_CODE_START* (depending on the type of a function) which are dedicated for global functions. And since they both require a closing by SYM_*_END, it is done here too.

startup_64, which does not use GLOBAL, but uses .globl explicitly, is converted too.

"No alignments" are preserved.

Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>

---

Notes:
[v9] in_pm32 is handled in a separate patch

 arch/x86/boot/copy.S      | 16 ++++++++--------
 arch/x86/boot/pmjump.S    |  4 ++--
 arch/x86/kernel/head_64.S |  5 +++--
 3 files changed, 13 insertions(+), 12 deletions(-)
arch/x86/boot/copy.S +8 -8
index 4c5f4f4ad035..6afd05e819d2 100644
@@ -15,7 +15,7 @@
 	.code16
 	.text
 
-GLOBAL(memcpy)
+SYM_FUNC_START_NOALIGN(memcpy)
 	pushw	%si
 	pushw	%di
 	movw	%ax, %di
@@ -29,9 +29,9 @@ GLOBAL(memcpy)
 	popw	%di
 	popw	%si
 	retl
-ENDPROC(memcpy)
+SYM_FUNC_END(memcpy)
 
-GLOBAL(memset)
+SYM_FUNC_START_NOALIGN(memset)
 	pushw	%di
 	movw	%ax, %di
 	movzbl	%dl, %eax
@@ -44,22 +44,22 @@ GLOBAL(memset)
 	rep; stosb
 	popw	%di
 	retl
-ENDPROC(memset)
+SYM_FUNC_END(memset)
 
-GLOBAL(copy_from_fs)
+SYM_FUNC_START_NOALIGN(copy_from_fs)
 	pushw	%ds
 	pushw	%fs
 	popw	%ds
 	calll	memcpy
 	popw	%ds
 	retl
-ENDPROC(copy_from_fs)
+SYM_FUNC_END(copy_from_fs)
 
-GLOBAL(copy_to_fs)
+SYM_FUNC_START_NOALIGN(copy_to_fs)
 	pushw	%es
 	pushw	%fs
 	popw	%es
 	calll	memcpy
 	popw	%es
 	retl
-ENDPROC(copy_to_fs)
+SYM_FUNC_END(copy_to_fs)
arch/x86/boot/pmjump.S +2 -2
index 81658fe35380..cbec8bd0841f 100644
@@ -21,7 +21,7 @@
 /*
  * void protected_mode_jump(u32 entrypoint, u32 bootparams);
  */
-GLOBAL(protected_mode_jump)
+SYM_FUNC_START_NOALIGN(protected_mode_jump)
 	movl	%edx, %esi		# Pointer to boot_params table
 
 	xorl	%ebx, %ebx
@@ -42,7 +42,7 @@ GLOBAL(protected_mode_jump)
 	.byte	0x66, 0xea		# ljmpl opcode
 2:	.long	.Lin_pm32		# offset
 	.word	__BOOT_CS		# segment
-ENDPROC(protected_mode_jump)
+SYM_FUNC_END(protected_mode_jump)
 
 	.code32
 	.section ".text32","ax"
arch/x86/kernel/head_64.S +3 -2
index 8b0926ac4ac6..10f306e31244 100644
@@ -49,8 +49,7 @@ L3_START_KERNEL = pud_index(__START_KERNEL_map)
 	.text
 	__HEAD
 	.code64
-	.globl startup_64
-startup_64:
+SYM_CODE_START_NOALIGN(startup_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
@@ -90,6 +89,8 @@ startup_64:
 	/* Form the CR3 value being sure to include the CR3 modifier */
 	addq	$(early_top_pgt - __START_KERNEL_map), %rax
 	jmp 1f
+SYM_CODE_END(startup_64)
+
 ENTRY(secondary_startup_64)
 	UNWIND_HINT_EMPTY
 	/*
Signature · 1 line
2.23.0
merge bot Applied
#39 lore raw

[tip: x86/asm] x86/asm: Do not annotate functions with GLOBAL

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     37818afd15fe720571955e2f51555a9ffc84363a
Gitweb:        https://git.kernel.org/tip/37818afd15fe720571955e2f51555a9ffc84363a
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:56 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:25:58 +02:00

x86/asm: Do not annotate functions with GLOBAL

GLOBAL is an x86's custom macro and is going to die very soon. It was meant for global symbols, but here, it was used for functions. Instead, use the new macros SYM_FUNC_START* and SYM_CODE_START* (depending on the type of the function) which are dedicated to global functions. And since they both require a closing by SYM_*_END, do that here too.

startup_64, which does not use GLOBAL but uses .globl explicitly, is converted too.

"No alignments" are preserved.

Cc Allison Randal <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Cao jin <[email protected]>
Cc Enrico Weigelt <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Kate Stewart <[email protected]>
Cc Maran Wilson <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/boot/copy.S      | 16 ++++++++--------
 arch/x86/boot/pmjump.S    |  4 ++--
 arch/x86/kernel/head_64.S |  5 +++--
 3 files changed, 13 insertions(+), 12 deletions(-)
arch/x86/boot/copy.S +8 -8
index 4c5f4f4..6afd05e 100644
@@ -15,7 +15,7 @@
 	.code16
 	.text
 
-GLOBAL(memcpy)
+SYM_FUNC_START_NOALIGN(memcpy)
 	pushw	%si
 	pushw	%di
 	movw	%ax, %di
@@ -29,9 +29,9 @@ GLOBAL(memcpy)
 	popw	%di
 	popw	%si
 	retl
-ENDPROC(memcpy)
+SYM_FUNC_END(memcpy)
 
-GLOBAL(memset)
+SYM_FUNC_START_NOALIGN(memset)
 	pushw	%di
 	movw	%ax, %di
 	movzbl	%dl, %eax
@@ -44,22 +44,22 @@ GLOBAL(memset)
 	rep; stosb
 	popw	%di
 	retl
-ENDPROC(memset)
+SYM_FUNC_END(memset)
 
-GLOBAL(copy_from_fs)
+SYM_FUNC_START_NOALIGN(copy_from_fs)
 	pushw	%ds
 	pushw	%fs
 	popw	%ds
 	calll	memcpy
 	popw	%ds
 	retl
-ENDPROC(copy_from_fs)
+SYM_FUNC_END(copy_from_fs)
 
-GLOBAL(copy_to_fs)
+SYM_FUNC_START_NOALIGN(copy_to_fs)
 	pushw	%es
 	pushw	%fs
 	popw	%es
 	calll	memcpy
 	popw	%es
 	retl
-ENDPROC(copy_to_fs)
+SYM_FUNC_END(copy_to_fs)
arch/x86/boot/pmjump.S +2 -2
index 81658fe..cbec8bd 100644
@@ -21,7 +21,7 @@
 /*
  * void protected_mode_jump(u32 entrypoint, u32 bootparams);
  */
-GLOBAL(protected_mode_jump)
+SYM_FUNC_START_NOALIGN(protected_mode_jump)
 	movl	%edx, %esi		# Pointer to boot_params table
 
 	xorl	%ebx, %ebx
@@ -42,7 +42,7 @@ GLOBAL(protected_mode_jump)
 	.byte	0x66, 0xea		# ljmpl opcode
 2:	.long	.Lin_pm32		# offset
 	.word	__BOOT_CS		# segment
-ENDPROC(protected_mode_jump)
+SYM_FUNC_END(protected_mode_jump)
 
 	.code32
 	.section ".text32","ax"
arch/x86/kernel/head_64.S +3 -2
index 8b0926a..10f306e 100644
@@ -49,8 +49,7 @@ L3_START_KERNEL = pud_index(__START_KERNEL_map)
 	.text
 	__HEAD
 	.code64
-	.globl startup_64
-startup_64:
+SYM_CODE_START_NOALIGN(startup_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
@@ -90,6 +89,8 @@ startup_64:
 	/* Form the CR3 value being sure to include the CR3 modifier */
 	addq	$(early_top_pgt - __START_KERNEL_map), %rax
 	jmp 1f
+SYM_CODE_END(startup_64)
+
 ENTRY(secondary_startup_64)
 	UNWIND_HINT_EMPTY
 	/*
author
#40 lore raw

PATCH v9 17/28 x86/asm: Use SYM_INNER_LABEL instead of GLOBAL

In reply to Jiri Slaby

The GLOBAL macro had several meanings and is going away. In this patch, convert all the inner function labels marked with GLOBAL to use SYM_INNER_LABEL instead.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Andy Lutomirski <[email protected]>
---
 arch/x86/entry/entry_64.S                |  6 +++---
 arch/x86/entry/entry_64_compat.S         |  4 ++--
 arch/x86/entry/vdso/vdso32/system_call.S |  2 +-
 arch/x86/kernel/ftrace_32.S              |  2 +-
 arch/x86/kernel/ftrace_64.S              | 16 ++++++++--------
 arch/x86/realmode/rm/reboot.S            |  2 +-
 6 files changed, 16 insertions(+), 16 deletions(-)
arch/x86/entry/entry_64.S +3 -3
index 607e25f54ff4..57d246048ac6 100644
@@ -162,7 +162,7 @@ ENTRY(entry_SYSCALL_64)
 	pushq	%r11					/* pt_regs->flags */
 	pushq	$__USER_CS				/* pt_regs->cs */
 	pushq	%rcx					/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_64_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	pushq	%rax					/* pt_regs->orig_ax */
 
 	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
@@ -621,7 +621,7 @@ ret_from_intr:
 	call	prepare_exit_to_usermode
 	TRACE_IRQS_IRETQ
 
-GLOBAL(swapgs_restore_regs_and_return_to_usermode)
+SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates user mode. */
 	testb	$3, CS(%rsp)
@@ -679,7 +679,7 @@ retint_kernel:
 	 */
 	TRACE_IRQS_IRETQ
 
-GLOBAL(restore_regs_and_return_to_kernel)
+SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates kernel mode. */
 	testb	$3, CS(%rsp)
arch/x86/entry/entry_64_compat.S +2 -2
index 39913770a44d..5c7e71669239 100644
@@ -146,7 +146,7 @@ ENTRY(entry_SYSENTER_compat)
 	pushq	$X86_EFLAGS_FIXED
 	popfq
 	jmp	.Lsysenter_flags_fixed
-GLOBAL(__end_entry_SYSENTER_compat)
+SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL)
 ENDPROC(entry_SYSENTER_compat)
 
 /*
@@ -215,7 +215,7 @@ ENTRY(entry_SYSCALL_compat)
 	pushq	%r11			/* pt_regs->flags */
 	pushq	$__USER32_CS		/* pt_regs->cs */
 	pushq	%rcx			/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_compat_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL)
 	movl	%eax, %eax		/* discard orig_ax high bits */
 	pushq	%rax			/* pt_regs->orig_ax */
 	pushq	%rdi			/* pt_regs->di */
arch/x86/entry/vdso/vdso32/system_call.S +1 -1
index 263d7433dea8..de1fff7188aa 100644
@@ -62,7 +62,7 @@ __kernel_vsyscall:
 
 	/* Enter using int $0x80 */
 	int	$0x80
-GLOBAL(int80_landing_pad)
+SYM_INNER_LABEL(int80_landing_pad, SYM_L_GLOBAL)
 
 	/*
 	 * Restore EDX and ECX in case they were clobbered.  EBP is not
arch/x86/kernel/ftrace_32.S +1 -1
index 073aab525d80..e0061dc976e1 100644
@@ -138,7 +138,7 @@ ENTRY(ftrace_regs_caller)
 	movl	function_trace_op, %ecx	# 3rd argument: ftrace_pos
 	pushl	%esp			# 4th argument: pt_regs
 
-GLOBAL(ftrace_regs_call)
+SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	call	ftrace_stub
 
 	addl	$4, %esp		# skip 4th argument
arch/x86/kernel/ftrace_64.S +8 -8
index 809d54397dba..3afaaf555637 100644
@@ -140,14 +140,14 @@ ENTRY(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
 	save_mcount_regs
 
-GLOBAL(ftrace_caller_op_ptr)
+SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
 	/* Load the ftrace_ops into the 3rd parameter */
 	movq function_trace_op(%rip), %rdx
 
 	/* regs go into 4th parameter (but make it NULL) */
 	movq $0, %rcx
 
-GLOBAL(ftrace_call)
+SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	call ftrace_stub
 
 	restore_mcount_regs
@@ -157,10 +157,10 @@ GLOBAL(ftrace_call)
 	 * think twice before adding any new code or changing the
 	 * layout here.
 	 */
-GLOBAL(ftrace_epilogue)
+SYM_INNER_LABEL(ftrace_epilogue, SYM_L_GLOBAL)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-GLOBAL(ftrace_graph_call)
+SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
 	jmp ftrace_stub
 #endif
 
@@ -180,7 +180,7 @@ ENTRY(ftrace_regs_caller)
 	save_mcount_regs 8
 	/* save_mcount_regs fills in first two parameters */
 
-GLOBAL(ftrace_regs_caller_op_ptr)
+SYM_INNER_LABEL(ftrace_regs_caller_op_ptr, SYM_L_GLOBAL)
 	/* Load the ftrace_ops into the 3rd parameter */
 	movq function_trace_op(%rip), %rdx
 
@@ -209,7 +209,7 @@ GLOBAL(ftrace_regs_caller_op_ptr)
 	/* regs go into 4th parameter */
 	leaq (%rsp), %rcx
 
-GLOBAL(ftrace_regs_call)
+SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	call ftrace_stub
 
 	/* Copy flags back to SS, to restore them */
@@ -239,7 +239,7 @@ GLOBAL(ftrace_regs_call)
 	 * The trampoline will add the code to jump
 	 * to the return.
 	 */
-GLOBAL(ftrace_regs_caller_end)
+SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
 
 	jmp ftrace_epilogue
 
@@ -261,7 +261,7 @@ fgraph_trace:
 	jnz ftrace_graph_caller
 #endif
 
-GLOBAL(ftrace_stub)
+SYM_INNER_LABEL(ftrace_stub, SYM_L_GLOBAL)
 	retq
 
 trace:
arch/x86/realmode/rm/reboot.S +1 -1
index cd2f97b9623b..f91425a01f8f 100644
@@ -33,7 +33,7 @@ ENTRY(machine_real_restart_asm)
 	movl	%eax, %cr0
 	ljmpl	$__KERNEL32_CS, $pa_machine_real_restart_paging_off
 
-GLOBAL(machine_real_restart_paging_off)
+SYM_INNER_LABEL(machine_real_restart_paging_off, SYM_L_GLOBAL)
 	xorl	%eax, %eax
 	xorl	%edx, %edx
 	movl	$MSR_EFER, %ecx
Signature · 1 line
2.23.0
maintainer
#41 lore raw

Re: [PATCH v9 17/28] x86/asm: Use SYM_INNER_LABEL instead of GLOBAL

Quoted 43 lines · Jiri Slaby

The GLOBAL macro had several meanings and is going away. In this patch, convert all the inner function labels marked with GLOBAL to use SYM_INNER_LABEL instead.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Andy Lutomirski <[email protected]>
---
 arch/x86/entry/entry_64.S                |  6 +++---
 arch/x86/entry/entry_64_compat.S         |  4 ++--
 arch/x86/entry/vdso/vdso32/system_call.S |  2 +-
 arch/x86/kernel/ftrace_32.S              |  2 +-
 arch/x86/kernel/ftrace_64.S              | 16 ++++++++--------
 arch/x86/realmode/rm/reboot.S            |  2 +-
 6 files changed, 16 insertions(+), 16 deletions(-)
arch/x86/entry/entry_64.S +2 -2
index 607e25f54ff4..57d246048ac6 100644
@@ -162,7 +162,7 @@ ENTRY(entry_SYSCALL_64)
 	pushq	%r11					/* pt_regs->flags */
 	pushq	$__USER_CS				/* pt_regs->cs */
 	pushq	%rcx					/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_64_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	pushq	%rax					/* pt_regs->orig_ax */
 
 	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
@@ -621,7 +621,7 @@ ret_from_intr:
 	call	prepare_exit_to_usermode
 	TRACE_IRQS_IRETQ
 
-GLOBAL(swapgs_restore_regs_and_return_to_usermode)
+SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates user mode. */
 	testb	$3, CS(%rsp)

arch/x86/entry/entry_64.S retint_kernel: · line 685

Quoted 8 lines
arch/x86/entry/entry_64.S +1 -1
@@ -679,7 +679,7 @@ retint_kernel:
 	 */
 	TRACE_IRQS_IRETQ
 
-GLOBAL(restore_regs_and_return_to_kernel)
+SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates kernel mode. */
 	testb	$3, CS(%rsp)

Do this too, while at it?

arch/x86/entry/entry_64.S +1 -1
index 57d246048ac6..e73369858556 100644
@@ -247,7 +247,7 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	 * We win! This label is here just for ease of understanding
 	 * perf profiles. Nothing jumps here.
 	 */
-syscall_return_via_sysret:
+SYM_INNER_LABEL(syscall_return_via_sysret, SYM_L_GLOBAL)
 	/* rcx and r11 are already restored (see code above) */
 	UNWIND_HINT_EMPTY
 	POP_REGS pop_rdi=0 skip_r11rcx=1
Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
merge bot Applied
#42 lore raw

[tip: x86/asm] x86/asm: Use SYM_INNER_LABEL instead of GLOBAL

In reply to Jiri Slaby
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     26ba4e5738a544aa17c462bfbe580e74071c810b
Gitweb:        https://git.kernel.org/tip/26ba4e5738a544aa17c462bfbe580e74071c810b
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:57 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:27:44 +02:00

x86/asm: Use SYM_INNER_LABEL instead of GLOBAL

The GLOBAL macro had several meanings and is going away. Convert all the inner function labels marked with GLOBAL to use SYM_INNER_LABEL instead.

Cc Andy Lutomirski <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Kosina <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Masami Hiramatsu <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/entry/entry_64.S                |  6 +++---
 arch/x86/entry/entry_64_compat.S         |  4 ++--
 arch/x86/entry/vdso/vdso32/system_call.S |  2 +-
 arch/x86/kernel/ftrace_32.S              |  2 +-
 arch/x86/kernel/ftrace_64.S              | 16 ++++++++--------
 arch/x86/realmode/rm/reboot.S            |  2 +-
 6 files changed, 16 insertions(+), 16 deletions(-)
arch/x86/entry/entry_64.S +3 -3
index 607e25f..57d2460 100644
@@ -162,7 +162,7 @@ ENTRY(entry_SYSCALL_64)
 	pushq	%r11					/* pt_regs->flags */
 	pushq	$__USER_CS				/* pt_regs->cs */
 	pushq	%rcx					/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_64_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	pushq	%rax					/* pt_regs->orig_ax */
 
 	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
@@ -621,7 +621,7 @@ ret_from_intr:
 	call	prepare_exit_to_usermode
 	TRACE_IRQS_IRETQ
 
-GLOBAL(swapgs_restore_regs_and_return_to_usermode)
+SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates user mode. */
 	testb	$3, CS(%rsp)
@@ -679,7 +679,7 @@ retint_kernel:
 	 */
 	TRACE_IRQS_IRETQ
 
-GLOBAL(restore_regs_and_return_to_kernel)
+SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL)
 #ifdef CONFIG_DEBUG_ENTRY
 	/* Assert that pt_regs indicates kernel mode. */
 	testb	$3, CS(%rsp)
arch/x86/entry/entry_64_compat.S +2 -2
index 3991377..5c7e716 100644
@@ -146,7 +146,7 @@ ENTRY(entry_SYSENTER_compat)
 	pushq	$X86_EFLAGS_FIXED
 	popfq
 	jmp	.Lsysenter_flags_fixed
-GLOBAL(__end_entry_SYSENTER_compat)
+SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL)
 ENDPROC(entry_SYSENTER_compat)
 
 /*
@@ -215,7 +215,7 @@ ENTRY(entry_SYSCALL_compat)
 	pushq	%r11			/* pt_regs->flags */
 	pushq	$__USER32_CS		/* pt_regs->cs */
 	pushq	%rcx			/* pt_regs->ip */
-GLOBAL(entry_SYSCALL_compat_after_hwframe)
+SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL)
 	movl	%eax, %eax		/* discard orig_ax high bits */
 	pushq	%rax			/* pt_regs->orig_ax */
 	pushq	%rdi			/* pt_regs->di */
arch/x86/entry/vdso/vdso32/system_call.S +1 -1
index 263d743..de1fff7 100644
@@ -62,7 +62,7 @@ __kernel_vsyscall:
 
 	/* Enter using int $0x80 */
 	int	$0x80
-GLOBAL(int80_landing_pad)
+SYM_INNER_LABEL(int80_landing_pad, SYM_L_GLOBAL)
 
 	/*
 	 * Restore EDX and ECX in case they were clobbered.  EBP is not
arch/x86/kernel/ftrace_32.S +1 -1
index 073aab5..e0061dc 100644
@@ -138,7 +138,7 @@ ENTRY(ftrace_regs_caller)
 	movl	function_trace_op, %ecx	# 3rd argument: ftrace_pos
 	pushl	%esp			# 4th argument: pt_regs
 
-GLOBAL(ftrace_regs_call)
+SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	call	ftrace_stub
 
 	addl	$4, %esp		# skip 4th argument
arch/x86/kernel/ftrace_64.S +8 -8
index 809d543..3afaaf5 100644
@@ -140,14 +140,14 @@ ENTRY(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
 	save_mcount_regs
 
-GLOBAL(ftrace_caller_op_ptr)
+SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
 	/* Load the ftrace_ops into the 3rd parameter */
 	movq function_trace_op(%rip), %rdx
 
 	/* regs go into 4th parameter (but make it NULL) */
 	movq $0, %rcx
 
-GLOBAL(ftrace_call)
+SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
 	call ftrace_stub
 
 	restore_mcount_regs
@@ -157,10 +157,10 @@ GLOBAL(ftrace_call)
 	 * think twice before adding any new code or changing the
 	 * layout here.
 	 */
-GLOBAL(ftrace_epilogue)
+SYM_INNER_LABEL(ftrace_epilogue, SYM_L_GLOBAL)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-GLOBAL(ftrace_graph_call)
+SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
 	jmp ftrace_stub
 #endif
 
@@ -180,7 +180,7 @@ ENTRY(ftrace_regs_caller)
 	save_mcount_regs 8
 	/* save_mcount_regs fills in first two parameters */
 
-GLOBAL(ftrace_regs_caller_op_ptr)
+SYM_INNER_LABEL(ftrace_regs_caller_op_ptr, SYM_L_GLOBAL)
 	/* Load the ftrace_ops into the 3rd parameter */
 	movq function_trace_op(%rip), %rdx
 
@@ -209,7 +209,7 @@ GLOBAL(ftrace_regs_caller_op_ptr)
 	/* regs go into 4th parameter */
 	leaq (%rsp), %rcx
 
-GLOBAL(ftrace_regs_call)
+SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
 	call ftrace_stub
 
 	/* Copy flags back to SS, to restore them */
@@ -239,7 +239,7 @@ GLOBAL(ftrace_regs_call)
 	 * The trampoline will add the code to jump
 	 * to the return.
 	 */
-GLOBAL(ftrace_regs_caller_end)
+SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
 
 	jmp ftrace_epilogue
 
@@ -261,7 +261,7 @@ fgraph_trace:
 	jnz ftrace_graph_caller
 #endif
 
-GLOBAL(ftrace_stub)
+SYM_INNER_LABEL(ftrace_stub, SYM_L_GLOBAL)
 	retq
 
 trace:
arch/x86/realmode/rm/reboot.S +1 -1
index cd2f97b..f91425a 100644
@@ -33,7 +33,7 @@ ENTRY(machine_real_restart_asm)
 	movl	%eax, %cr0
 	ljmpl	$__KERNEL32_CS, $pa_machine_real_restart_paging_off
 
-GLOBAL(machine_real_restart_paging_off)
+SYM_INNER_LABEL(machine_real_restart_paging_off, SYM_L_GLOBAL)
 	xorl	%eax, %eax
 	xorl	%edx, %edx
 	movl	$MSR_EFER, %ecx
author
#43 lore raw

PATCH v9 18/28 x86/asm/realmode: Use SYM_DATA_* instead of GLOBAL

In reply to Jiri Slaby

GLOBAL had several meanings and is going away. In this patch, convert all the data marked using GLOBAL to use SYM_DATA_START or SYM_DATA instead.

Note that SYM_DATA_END_LABEL is used to generate tr_gdt_end too.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/realmode/rm/header.S            |  8 +++-----
 arch/x86/realmode/rm/reboot.S            |  8 ++++----
 arch/x86/realmode/rm/stack.S             | 14 ++++++--------
 arch/x86/realmode/rm/trampoline_32.S     | 10 +++++-----
 arch/x86/realmode/rm/trampoline_64.S     | 19 +++++++++----------
 arch/x86/realmode/rm/trampoline_common.S |  2 +-
 arch/x86/realmode/rm/wakeup_asm.S        |  8 ++++----
 arch/x86/realmode/rmpiggy.S              | 10 ++++------
 8 files changed, 36 insertions(+), 43 deletions(-)
arch/x86/realmode/rm/header.S +3 -5
index 6363761cc74c..af04512c02d9 100644
@@ -14,7 +14,7 @@
 	.section ".header", "a"
 
 	.balign	16
-GLOBAL(real_mode_header)
+SYM_DATA_START(real_mode_header)
 	.long	pa_text_start
 	.long	pa_ro_end
 	/* SMP trampoline */
@@ -33,11 +33,9 @@ GLOBAL(real_mode_header)
 #ifdef CONFIG_X86_64
 	.long	__KERNEL32_CS
 #endif
-END(real_mode_header)
+SYM_DATA_END(real_mode_header)
 
 	/* End signature, used to verify integrity */
 	.section ".signature","a"
 	.balign 4
-GLOBAL(end_signature)
-	.long	REALMODE_END_SIGNATURE
-END(end_signature)
+SYM_DATA(end_signature, .long REALMODE_END_SIGNATURE)
arch/x86/realmode/rm/reboot.S +4 -4
index f91425a01f8f..424826afb501 100644
@@ -127,13 +127,13 @@ bios:
 	.section ".rodata", "a"
 
 	.balign	16
-GLOBAL(machine_real_restart_idt)
+SYM_DATA_START(machine_real_restart_idt)
 	.word	0xffff		/* Length - real mode default value */
 	.long	0		/* Base - real mode default value */
-END(machine_real_restart_idt)
+SYM_DATA_END(machine_real_restart_idt)
 
 	.balign	16
-GLOBAL(machine_real_restart_gdt)
+SYM_DATA_START(machine_real_restart_gdt)
 	/* Self-pointer */
 	.word	0xffff		/* Length - real mode default value */
 	.long	pa_machine_real_restart_gdt
@@ -153,4 +153,4 @@ GLOBAL(machine_real_restart_gdt)
 	 * semantics we don't have to reload the segments once CR0.PE = 0.
 	 */
 	.quad	GDT_ENTRY(0x0093, 0x100, 0xffff)
-END(machine_real_restart_gdt)
+SYM_DATA_END(machine_real_restart_gdt)
arch/x86/realmode/rm/stack.S +6 -8
index 8d4cb64799ea..0fca64061ad2 100644
@@ -6,15 +6,13 @@
 #include <linux/linkage.h>
 
 	.data
-GLOBAL(HEAP)
-	.long	rm_heap
-GLOBAL(heap_end)
-	.long	rm_stack
+SYM_DATA(HEAP,		.long rm_heap)
+SYM_DATA(heap_end,	.long rm_stack)
 
 	.bss
 	.balign	16
-GLOBAL(rm_heap)
-	.space	2048
-GLOBAL(rm_stack)
+SYM_DATA(rm_heap,	.space 2048)
+
+SYM_DATA_START(rm_stack)
 	.space	2048
-GLOBAL(rm_stack_end)
+SYM_DATA_END_LABEL(rm_stack, SYM_L_GLOBAL, rm_stack_end)
arch/x86/realmode/rm/trampoline_32.S +5 -5
index 1868b158480d..ff00594a2ed0 100644
@@ -62,10 +62,10 @@ ENTRY(startup_32)			# note: also used from wakeup_asm.S
 
 	.bss
 	.balign 8
-GLOBAL(trampoline_header)
-	tr_start:		.space	4
-	tr_gdt_pad:		.space	2
-	tr_gdt:			.space	6
-END(trampoline_header)
+SYM_DATA_START(trampoline_header)
+	SYM_DATA_LOCAL(tr_start,	.space 4)
+	SYM_DATA_LOCAL(tr_gdt_pad,	.space 2)
+	SYM_DATA_LOCAL(tr_gdt,		.space 6)
+SYM_DATA_END(trampoline_header)
 	
 #include "trampoline_common.S"
arch/x86/realmode/rm/trampoline_64.S +9 -10
index aee2b45d83b8..c1aeab1dae25 100644
@@ -149,26 +149,25 @@ ENTRY(startup_64)
 	# Duplicate the global descriptor table
 	# so the kernel can live anywhere
 	.balign	16
-	.globl tr_gdt
-tr_gdt:
+SYM_DATA_START(tr_gdt)
 	.short	tr_gdt_end - tr_gdt - 1	# gdt limit
 	.long	pa_tr_gdt
 	.short	0
 	.quad	0x00cf9b000000ffff	# __KERNEL32_CS
 	.quad	0x00af9b000000ffff	# __KERNEL_CS
 	.quad	0x00cf93000000ffff	# __KERNEL_DS
-tr_gdt_end:
+SYM_DATA_END_LABEL(tr_gdt, SYM_L_LOCAL, tr_gdt_end)
 
 	.bss
 	.balign	PAGE_SIZE
-GLOBAL(trampoline_pgd)		.space	PAGE_SIZE
+SYM_DATA(trampoline_pgd, .space PAGE_SIZE)
 
 	.balign	8
-GLOBAL(trampoline_header)
-	tr_start:		.space	8
-	GLOBAL(tr_efer)		.space	8
-	GLOBAL(tr_cr4)		.space	4
-	GLOBAL(tr_flags)	.space	4
-END(trampoline_header)
+SYM_DATA_START(trampoline_header)
+	SYM_DATA_LOCAL(tr_start,	.space 8)
+	SYM_DATA(tr_efer,		.space 8)
+	SYM_DATA(tr_cr4,		.space 4)
+	SYM_DATA(tr_flags,		.space 4)
+SYM_DATA_END(trampoline_header)
 
 #include "trampoline_common.S"
arch/x86/realmode/rm/trampoline_common.S +1 -1
index 8d8208dcca24..5033e640f957 100644
@@ -1,4 +1,4 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 	.section ".rodata","a"
 	.balign	16
-tr_idt: .fill 1, 6, 0
+SYM_DATA_LOCAL(tr_idt, .fill 1, 6, 0)
arch/x86/realmode/rm/wakeup_asm.S +4 -4
index 08438ee539bc..01092d665bc2 100644
@@ -17,7 +17,7 @@
 	.section ".data", "aw"
 
 	.balign	16
-GLOBAL(wakeup_header)
+SYM_DATA_START(wakeup_header)
 	video_mode:	.short	0	/* Video mode number */
 	pmode_entry:	.long	0
 	pmode_cs:	.short	__KERNEL_CS
@@ -31,7 +31,7 @@ GLOBAL(wakeup_header)
 	realmode_flags:	.long	0
 	real_magic:	.long	0
 	signature:	.long	WAKEUP_HEADER_SIGNATURE
-END(wakeup_header)
+SYM_DATA_END(wakeup_header)
 
 	.text
 	.code16
@@ -152,7 +152,7 @@ bogus_real_magic:
 	 */
 
 	.balign	16
-GLOBAL(wakeup_gdt)
+SYM_DATA_START(wakeup_gdt)
 	.word	3*8-1		/* Self-descriptor */
 	.long	pa_wakeup_gdt
 	.word	0
@@ -164,7 +164,7 @@ GLOBAL(wakeup_gdt)
 	.word	0xffff		/* 16-bit data segment @ real_mode_base */
 	.long	0x93000000 + pa_real_mode_base
 	.word	0x008f		/* big real mode */
-END(wakeup_gdt)
+SYM_DATA_END(wakeup_gdt)
 
 	.section ".rodata","a"
 	.balign	8
arch/x86/realmode/rmpiggy.S +4 -6
index c078dba40cef..c8fef76743f6 100644
@@ -10,12 +10,10 @@
 
 	.balign PAGE_SIZE
 
-GLOBAL(real_mode_blob)
+SYM_DATA_START(real_mode_blob)
 	.incbin	"arch/x86/realmode/rm/realmode.bin"
-END(real_mode_blob)
+SYM_DATA_END_LABEL(real_mode_blob, SYM_L_GLOBAL, real_mode_blob_end)
 
-GLOBAL(real_mode_blob_end);
-
-GLOBAL(real_mode_relocs)
+SYM_DATA_START(real_mode_relocs)
 	.incbin	"arch/x86/realmode/rm/realmode.relocs"
-END(real_mode_relocs)
+SYM_DATA_END(real_mode_relocs)
Signature · 1 line
2.23.0
merge bot Applied
#44 lore raw

[tip: x86/asm] x86/asm/realmode: Use SYM_DATA_* instead of GLOBAL

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     78f44330d80e2632856b840cf82aa554f34415a1
Gitweb:        https://git.kernel.org/tip/78f44330d80e2632856b840cf82aa554f34415a1
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:58 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:28:47 +02:00

x86/asm/realmode: Use SYM_DATA_* instead of GLOBAL

GLOBAL had several meanings and is going away. Convert all the data marked using GLOBAL to use SYM_DATA_START or SYM_DATA instead.

Note that SYM_DATA_END_LABEL is used to generate tr_gdt_end too.

---
 arch/x86/realmode/rm/header.S            |  8 +++-----
 arch/x86/realmode/rm/reboot.S            |  8 ++++----
 arch/x86/realmode/rm/stack.S             | 14 ++++++--------
 arch/x86/realmode/rm/trampoline_32.S     | 10 +++++-----
 arch/x86/realmode/rm/trampoline_64.S     | 19 +++++++++----------
 arch/x86/realmode/rm/trampoline_common.S |  2 +-
 arch/x86/realmode/rm/wakeup_asm.S        |  8 ++++----
 arch/x86/realmode/rmpiggy.S              | 10 ++++------
 8 files changed, 36 insertions(+), 43 deletions(-)
arch/x86/realmode/rm/header.S +3 -5
index 6363761..af04512 100644
@@ -14,7 +14,7 @@
 	.section ".header", "a"
 
 	.balign	16
-GLOBAL(real_mode_header)
+SYM_DATA_START(real_mode_header)
 	.long	pa_text_start
 	.long	pa_ro_end
 	/* SMP trampoline */
@@ -33,11 +33,9 @@ GLOBAL(real_mode_header)
 #ifdef CONFIG_X86_64
 	.long	__KERNEL32_CS
 #endif
-END(real_mode_header)
+SYM_DATA_END(real_mode_header)
 
 	/* End signature, used to verify integrity */
 	.section ".signature","a"
 	.balign 4
-GLOBAL(end_signature)
-	.long	REALMODE_END_SIGNATURE
-END(end_signature)
+SYM_DATA(end_signature, .long REALMODE_END_SIGNATURE)
arch/x86/realmode/rm/reboot.S +4 -4
index f91425a..424826a 100644
@@ -127,13 +127,13 @@ bios:
 	.section ".rodata", "a"
 
 	.balign	16
-GLOBAL(machine_real_restart_idt)
+SYM_DATA_START(machine_real_restart_idt)
 	.word	0xffff		/* Length - real mode default value */
 	.long	0		/* Base - real mode default value */
-END(machine_real_restart_idt)
+SYM_DATA_END(machine_real_restart_idt)
 
 	.balign	16
-GLOBAL(machine_real_restart_gdt)
+SYM_DATA_START(machine_real_restart_gdt)
 	/* Self-pointer */
 	.word	0xffff		/* Length - real mode default value */
 	.long	pa_machine_real_restart_gdt
@@ -153,4 +153,4 @@ GLOBAL(machine_real_restart_gdt)
 	 * semantics we don't have to reload the segments once CR0.PE = 0.
 	 */
 	.quad	GDT_ENTRY(0x0093, 0x100, 0xffff)
-END(machine_real_restart_gdt)
+SYM_DATA_END(machine_real_restart_gdt)
arch/x86/realmode/rm/stack.S +6 -8
index 8d4cb64..0fca640 100644
@@ -6,15 +6,13 @@
 #include <linux/linkage.h>
 
 	.data
-GLOBAL(HEAP)
-	.long	rm_heap
-GLOBAL(heap_end)
-	.long	rm_stack
+SYM_DATA(HEAP,		.long rm_heap)
+SYM_DATA(heap_end,	.long rm_stack)
 
 	.bss
 	.balign	16
-GLOBAL(rm_heap)
-	.space	2048
-GLOBAL(rm_stack)
+SYM_DATA(rm_heap,	.space 2048)
+
+SYM_DATA_START(rm_stack)
 	.space	2048
-GLOBAL(rm_stack_end)
+SYM_DATA_END_LABEL(rm_stack, SYM_L_GLOBAL, rm_stack_end)
arch/x86/realmode/rm/trampoline_32.S +5 -5
index 1868b15..ff00594 100644
@@ -62,10 +62,10 @@ ENTRY(startup_32)			# note: also used from wakeup_asm.S
 
 	.bss
 	.balign 8
-GLOBAL(trampoline_header)
-	tr_start:		.space	4
-	tr_gdt_pad:		.space	2
-	tr_gdt:			.space	6
-END(trampoline_header)
+SYM_DATA_START(trampoline_header)
+	SYM_DATA_LOCAL(tr_start,	.space 4)
+	SYM_DATA_LOCAL(tr_gdt_pad,	.space 2)
+	SYM_DATA_LOCAL(tr_gdt,		.space 6)
+SYM_DATA_END(trampoline_header)
 	
 #include "trampoline_common.S"
arch/x86/realmode/rm/trampoline_64.S +9 -10
index aee2b45..c1aeab1 100644
@@ -149,26 +149,25 @@ ENTRY(startup_64)
 	# Duplicate the global descriptor table
 	# so the kernel can live anywhere
 	.balign	16
-	.globl tr_gdt
-tr_gdt:
+SYM_DATA_START(tr_gdt)
 	.short	tr_gdt_end - tr_gdt - 1	# gdt limit
 	.long	pa_tr_gdt
 	.short	0
 	.quad	0x00cf9b000000ffff	# __KERNEL32_CS
 	.quad	0x00af9b000000ffff	# __KERNEL_CS
 	.quad	0x00cf93000000ffff	# __KERNEL_DS
-tr_gdt_end:
+SYM_DATA_END_LABEL(tr_gdt, SYM_L_LOCAL, tr_gdt_end)
 
 	.bss
 	.balign	PAGE_SIZE
-GLOBAL(trampoline_pgd)		.space	PAGE_SIZE
+SYM_DATA(trampoline_pgd, .space PAGE_SIZE)
 
 	.balign	8
-GLOBAL(trampoline_header)
-	tr_start:		.space	8
-	GLOBAL(tr_efer)		.space	8
-	GLOBAL(tr_cr4)		.space	4
-	GLOBAL(tr_flags)	.space	4
-END(trampoline_header)
+SYM_DATA_START(trampoline_header)
+	SYM_DATA_LOCAL(tr_start,	.space 8)
+	SYM_DATA(tr_efer,		.space 8)
+	SYM_DATA(tr_cr4,		.space 4)
+	SYM_DATA(tr_flags,		.space 4)
+SYM_DATA_END(trampoline_header)
 
 #include "trampoline_common.S"
arch/x86/realmode/rm/trampoline_common.S +1 -1
index 8d8208d..5033e64 100644
@@ -1,4 +1,4 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 	.section ".rodata","a"
 	.balign	16
-tr_idt: .fill 1, 6, 0
+SYM_DATA_LOCAL(tr_idt, .fill 1, 6, 0)
arch/x86/realmode/rm/wakeup_asm.S +4 -4
index 08438ee..01092d6 100644
@@ -17,7 +17,7 @@
 	.section ".data", "aw"
 
 	.balign	16
-GLOBAL(wakeup_header)
+SYM_DATA_START(wakeup_header)
 	video_mode:	.short	0	/* Video mode number */
 	pmode_entry:	.long	0
 	pmode_cs:	.short	__KERNEL_CS
@@ -31,7 +31,7 @@ GLOBAL(wakeup_header)
 	realmode_flags:	.long	0
 	real_magic:	.long	0
 	signature:	.long	WAKEUP_HEADER_SIGNATURE
-END(wakeup_header)
+SYM_DATA_END(wakeup_header)
 
 	.text
 	.code16
@@ -152,7 +152,7 @@ bogus_real_magic:
 	 */
 
 	.balign	16
-GLOBAL(wakeup_gdt)
+SYM_DATA_START(wakeup_gdt)
 	.word	3*8-1		/* Self-descriptor */
 	.long	pa_wakeup_gdt
 	.word	0
@@ -164,7 +164,7 @@ GLOBAL(wakeup_gdt)
 	.word	0xffff		/* 16-bit data segment @ real_mode_base */
 	.long	0x93000000 + pa_real_mode_base
 	.word	0x008f		/* big real mode */
-END(wakeup_gdt)
+SYM_DATA_END(wakeup_gdt)
 
 	.section ".rodata","a"
 	.balign	8
arch/x86/realmode/rmpiggy.S +4 -6
index c078dba..c8fef76 100644
@@ -10,12 +10,10 @@
 
 	.balign PAGE_SIZE
 
-GLOBAL(real_mode_blob)
+SYM_DATA_START(real_mode_blob)
 	.incbin	"arch/x86/realmode/rm/realmode.bin"
-END(real_mode_blob)
+SYM_DATA_END_LABEL(real_mode_blob, SYM_L_GLOBAL, real_mode_blob_end)
 
-GLOBAL(real_mode_blob_end);
-
-GLOBAL(real_mode_relocs)
+SYM_DATA_START(real_mode_relocs)
 	.incbin	"arch/x86/realmode/rm/realmode.relocs"
-END(real_mode_relocs)
+SYM_DATA_END(real_mode_relocs)
author
#45 lore raw

PATCH v9 19/28 x86/asm: Kill the last GLOBAL user and remove the macro

In reply to Jiri Slaby

Convert the remaining 32bit users and remove GLOBAL macro finally. In particular, this means to use SYM_ENTRY for the singlestepping hack region.

Exclude the global definition of GLOBAL from x86 too.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/entry/entry_32.S      | 4 ++--
 arch/x86/include/asm/linkage.h | 8 --------
 include/linux/linkage.h        | 2 ++
 3 files changed, 4 insertions(+), 10 deletions(-)
arch/x86/entry/entry_32.S +2 -2
index f37ff583cecb..4900a6a5e125 100644
@@ -832,7 +832,7 @@ SYM_INNER_LABEL_ALIGN(resume_userspace, SYM_L_LOCAL)
 	jmp	restore_all
 SYM_CODE_END(ret_from_exception)
 
-GLOBAL(__begin_SYSENTER_singlestep_region)
+SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
 /*
  * All code from here through __end_SYSENTER_singlestep_region is subject
  * to being single-stepped if a user program sets TF and executes SYSENTER.
@@ -1011,7 +1011,7 @@ ENTRY(entry_SYSENTER_32)
 	pushl	$X86_EFLAGS_FIXED
 	popfl
 	jmp	.Lsysenter_flags_fixed
-GLOBAL(__end_SYSENTER_singlestep_region)
+SYM_ENTRY(__end_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
 ENDPROC(entry_SYSENTER_32)
 
 /*
arch/x86/include/asm/linkage.h +0 -8
index e07188e8d763..365111789cc6 100644
@@ -13,14 +13,6 @@
 
 #ifdef __ASSEMBLY__
 
-/*
- * GLOBAL is DEPRECATED
- *
- * use SYM_DATA_START, SYM_FUNC_START, SYM_INNER_LABEL, SYM_CODE_START, or
- * similar
- */
-#define GLOBAL(name)	SYM_ENTRY(name, SYM_L_GLOBAL, SYM_A_NONE)
-
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
 #define __ALIGN		.p2align 4, 0x90
 #define __ALIGN_STR	__stringify(__ALIGN)
include/linux/linkage.h +2 -0
index f3ae8f3dea2c..cb1108dde385 100644
@@ -105,12 +105,14 @@
 
 /* === DEPRECATED annotations === */
 
+#ifndef CONFIG_X86
 #ifndef GLOBAL
 /* deprecated, use SYM_DATA*, SYM_ENTRY, or similar */
 #define GLOBAL(name) \
 	.globl name ASM_NL \
 	name:
 #endif
+#endif
 
 #ifndef ENTRY
 /* deprecated, use SYM_FUNC_START */
Signature · 1 line
2.23.0
merge bot Applied
#46 lore raw

[tip: x86/asm] x86/asm: Remove the last GLOBAL user and remove the macro

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     b4edca150106a68d05eaf823d665a355ff19e28b
Gitweb:        https://git.kernel.org/tip/b4edca150106a68d05eaf823d665a355ff19e28b
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:50:59 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:29:50 +02:00

x86/asm: Remove the last GLOBAL user and remove the macro

Convert the remaining 32bit users and remove the GLOBAL macro finally. In particular, this means to use SYM_ENTRY for the singlestepping hack region.

Exclude the global definition of GLOBAL from x86 too.

Cc Andrew Morton <[email protected]>
Cc Andrey Ryabinin <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Mark Rutland <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/entry/entry_32.S      | 4 ++--
 arch/x86/include/asm/linkage.h | 8 --------
 include/linux/linkage.h        | 2 ++
 3 files changed, 4 insertions(+), 10 deletions(-)
arch/x86/entry/entry_32.S +2 -2
index f37ff58..4900a6a 100644
@@ -832,7 +832,7 @@ SYM_INNER_LABEL_ALIGN(resume_userspace, SYM_L_LOCAL)
 	jmp	restore_all
 SYM_CODE_END(ret_from_exception)
 
-GLOBAL(__begin_SYSENTER_singlestep_region)
+SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
 /*
  * All code from here through __end_SYSENTER_singlestep_region is subject
  * to being single-stepped if a user program sets TF and executes SYSENTER.
@@ -1011,7 +1011,7 @@ ENTRY(entry_SYSENTER_32)
 	pushl	$X86_EFLAGS_FIXED
 	popfl
 	jmp	.Lsysenter_flags_fixed
-GLOBAL(__end_SYSENTER_singlestep_region)
+SYM_ENTRY(__end_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
 ENDPROC(entry_SYSENTER_32)
 
 /*
arch/x86/include/asm/linkage.h +0 -8
index e07188e..3651117 100644
@@ -13,14 +13,6 @@
 
 #ifdef __ASSEMBLY__
 
-/*
- * GLOBAL is DEPRECATED
- *
- * use SYM_DATA_START, SYM_FUNC_START, SYM_INNER_LABEL, SYM_CODE_START, or
- * similar
- */
-#define GLOBAL(name)	SYM_ENTRY(name, SYM_L_GLOBAL, SYM_A_NONE)
-
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_ALIGNMENT_16)
 #define __ALIGN		.p2align 4, 0x90
 #define __ALIGN_STR	__stringify(__ALIGN)
include/linux/linkage.h +2 -0
index f3ae8f3..cb1108d 100644
@@ -105,12 +105,14 @@
 
 /* === DEPRECATED annotations === */
 
+#ifndef CONFIG_X86
 #ifndef GLOBAL
 /* deprecated, use SYM_DATA*, SYM_ENTRY, or similar */
 #define GLOBAL(name) \
 	.globl name ASM_NL \
 	name:
 #endif
+#endif
 
 #ifndef ENTRY
 /* deprecated, use SYM_FUNC_START */
author
#47 lore raw

PATCH v9 20/28 x86/asm: Make some functions local

In reply to Jiri Slaby

There is a couple of assembly functions, which are invoked only locally in the file they are defined. In C, they are marked "static". In assembly, annotate them using SYM_{FUNC,CODE}_START_LOCAL (and switch their ENDPROC to SYM_{FUNC,CODE}_END too). Whether FUNC or CODE is used, depends on whether ENDPROC or END was used for a particular function before.

Cc Borislav Petkov <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Matt Fleming <[email protected]>
Cc Ard Biesheuvel <[email protected]>
---
 arch/x86/boot/compressed/efi_thunk_64.S |  8 ++++----
 arch/x86/entry/entry_64.S               | 21 +++++++++++----------
 arch/x86/lib/copy_page_64.S             |  4 ++--
 arch/x86/lib/memcpy_64.S                | 12 ++++++------
 arch/x86/lib/memset_64.S                |  8 ++++----
 arch/x86/platform/efi/efi_thunk_64.S    | 12 ++++++------
 arch/x86/platform/pvh/head.S            |  4 ++--
 7 files changed, 35 insertions(+), 34 deletions(-)
arch/x86/boot/compressed/efi_thunk_64.S +4 -4
index d66000d23921..31312070db22 100644
@@ -99,12 +99,12 @@ ENTRY(efi64_thunk)
 	ret
 ENDPROC(efi64_thunk)
 
-ENTRY(efi_exit32)
+SYM_FUNC_START_LOCAL(efi_exit32)
 	movq	func_rt_ptr(%rip), %rax
 	push	%rax
 	mov	%rdi, %rax
 	ret
-ENDPROC(efi_exit32)
+SYM_FUNC_END(efi_exit32)
 
 	.code32
 /*
@@ -112,7 +112,7 @@ ENDPROC(efi_exit32)
  *
  * The stack should represent the 32-bit calling convention.
  */
-ENTRY(efi_enter32)
+SYM_FUNC_START_LOCAL(efi_enter32)
 	movl	$__KERNEL_DS, %eax
 	movl	%eax, %ds
 	movl	%eax, %es
@@ -172,7 +172,7 @@ ENTRY(efi_enter32)
 	btsl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 	lret
-ENDPROC(efi_enter32)
+SYM_FUNC_END(efi_enter32)
 
 	.data
 	.balign	8
arch/x86/entry/entry_64.S +11 -10
index 57d246048ac6..1568da63bf16 100644
@@ -1101,7 +1101,8 @@ idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0
  * existing activation in its critical region -- if so, we pop the current
  * activation and restart the handler using the previous one.
  */
-ENTRY(xen_do_hypervisor_callback)		/* do_hypervisor_callback(struct *pt_regs) */
+/* do_hypervisor_callback(struct *pt_regs) */
+SYM_CODE_START_LOCAL(xen_do_hypervisor_callback)
 
 /*
  * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
@@ -1119,7 +1120,7 @@ ENTRY(xen_do_hypervisor_callback)		/* do_hypervisor_callback(struct *pt_regs) */
 	call	xen_maybe_preempt_hcall
 #endif
 	jmp	error_exit
-END(xen_do_hypervisor_callback)
+SYM_CODE_END(xen_do_hypervisor_callback)
 
 /*
  * Hypervisor uses this for application faults while it executes.
@@ -1214,7 +1215,7 @@ idtentry machine_check		do_mce			has_error_code=0	paranoid=1
  * Use slow, but surefire "are we in kernel?" check.
  * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
  */
-ENTRY(paranoid_entry)
+SYM_CODE_START_LOCAL(paranoid_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
@@ -1248,7 +1249,7 @@ ENTRY(paranoid_entry)
 	FENCE_SWAPGS_KERNEL_ENTRY
 
 	ret
-END(paranoid_entry)
+SYM_CODE_END(paranoid_entry)
 
 /*
  * "Paranoid" exit path from exception stack.  This is invoked
@@ -1262,7 +1263,7 @@ END(paranoid_entry)
  *
  * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
  */
-ENTRY(paranoid_exit)
+SYM_CODE_START_LOCAL(paranoid_exit)
 	UNWIND_HINT_REGS
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF_DEBUG
@@ -1279,12 +1280,12 @@ ENTRY(paranoid_exit)
 	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
 .Lparanoid_exit_restore:
 	jmp restore_regs_and_return_to_kernel
-END(paranoid_exit)
+SYM_CODE_END(paranoid_exit)
 
 /*
  * Save all registers in pt_regs, and switch GS if needed.
  */
-ENTRY(error_entry)
+SYM_CODE_START_LOCAL(error_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
@@ -1364,16 +1365,16 @@ ENTRY(error_entry)
 	call	fixup_bad_iret
 	mov	%rax, %rsp
 	jmp	.Lerror_entry_from_usermode_after_swapgs
-END(error_entry)
+SYM_CODE_END(error_entry)
 
-ENTRY(error_exit)
+SYM_CODE_START_LOCAL(error_exit)
 	UNWIND_HINT_REGS
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	testb	$3, CS(%rsp)
 	jz	retint_kernel
 	jmp	.Lretint_user
-END(error_exit)
+SYM_CODE_END(error_exit)
 
 /*
  * Runs on exception stack.  Xen PV does not go through this path at all,
arch/x86/lib/copy_page_64.S +2 -2
index fd2d09afa097..f505870bd93b 100644
@@ -21,7 +21,7 @@ ENTRY(copy_page)
 ENDPROC(copy_page)
 EXPORT_SYMBOL(copy_page)
 
-ENTRY(copy_page_regs)
+SYM_FUNC_START_LOCAL(copy_page_regs)
 	subq	$2*8,	%rsp
 	movq	%rbx,	(%rsp)
 	movq	%r12,	1*8(%rsp)
@@ -86,4 +86,4 @@ ENTRY(copy_page_regs)
 	movq	1*8(%rsp), %r12
 	addq	$2*8, %rsp
 	ret
-ENDPROC(copy_page_regs)
+SYM_FUNC_END(copy_page_regs)
arch/x86/lib/memcpy_64.S +6 -6
index 57a64266ba69..3265b21e86c0 100644
@@ -29,7 +29,7 @@
  * rax original destination
  */
 SYM_FUNC_START_ALIAS(__memcpy)
-ENTRY(memcpy)
+SYM_FUNC_START_LOCAL(memcpy)
 	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp memcpy_erms", X86_FEATURE_ERMS
 
@@ -41,7 +41,7 @@ ENTRY(memcpy)
 	movl %edx, %ecx
 	rep movsb
 	ret
-ENDPROC(memcpy)
+SYM_FUNC_END(memcpy)
 SYM_FUNC_END_ALIAS(__memcpy)
 EXPORT_SYMBOL(memcpy)
 EXPORT_SYMBOL(__memcpy)
@@ -50,14 +50,14 @@ EXPORT_SYMBOL(__memcpy)
  * memcpy_erms() - enhanced fast string memcpy. This is faster and
  * simpler than memcpy. Use memcpy_erms when possible.
  */
-ENTRY(memcpy_erms)
+SYM_FUNC_START_LOCAL(memcpy_erms)
 	movq %rdi, %rax
 	movq %rdx, %rcx
 	rep movsb
 	ret
-ENDPROC(memcpy_erms)
+SYM_FUNC_END(memcpy_erms)
 
-ENTRY(memcpy_orig)
+SYM_FUNC_START_LOCAL(memcpy_orig)
 	movq %rdi, %rax
 
 	cmpq $0x20, %rdx
@@ -182,7 +182,7 @@ ENTRY(memcpy_orig)
 
 .Lend:
 	retq
-ENDPROC(memcpy_orig)
+SYM_FUNC_END(memcpy_orig)
 
 #ifndef CONFIG_UML
 
arch/x86/lib/memset_64.S +4 -4
index 927ac44d34aa..564abf9ecedb 100644
@@ -59,16 +59,16 @@ EXPORT_SYMBOL(__memset)
  *
  * rax   original destination
  */
-ENTRY(memset_erms)
+SYM_FUNC_START_LOCAL(memset_erms)
 	movq %rdi,%r9
 	movb %sil,%al
 	movq %rdx,%rcx
 	rep stosb
 	movq %r9,%rax
 	ret
-ENDPROC(memset_erms)
+SYM_FUNC_END(memset_erms)
 
-ENTRY(memset_orig)
+SYM_FUNC_START_LOCAL(memset_orig)
 	movq %rdi,%r10
 
 	/* expand byte value  */
@@ -139,4 +139,4 @@ ENTRY(memset_orig)
 	subq %r8,%rdx
 	jmp .Lafter_bad_alignment
 .Lfinal:
-ENDPROC(memset_orig)
+SYM_FUNC_END(memset_orig)
arch/x86/platform/efi/efi_thunk_64.S +6 -6
index 46c58b08739c..d677a7eb2d0a 100644
@@ -67,7 +67,7 @@ ENDPROC(efi64_thunk)
  *
  * This function must be invoked with a 1:1 mapped stack.
  */
-ENTRY(__efi64_thunk)
+SYM_FUNC_START_LOCAL(__efi64_thunk)
 	movl	%ds, %eax
 	push	%rax
 	movl	%es, %eax
@@ -114,14 +114,14 @@ ENTRY(__efi64_thunk)
 	or	%rcx, %rax
 1:
 	ret
-ENDPROC(__efi64_thunk)
+SYM_FUNC_END(__efi64_thunk)
 
-ENTRY(efi_exit32)
+SYM_FUNC_START_LOCAL(efi_exit32)
 	movq	func_rt_ptr(%rip), %rax
 	push	%rax
 	mov	%rdi, %rax
 	ret
-ENDPROC(efi_exit32)
+SYM_FUNC_END(efi_exit32)
 
 	.code32
 /*
@@ -129,7 +129,7 @@ ENDPROC(efi_exit32)
  *
  * The stack should represent the 32-bit calling convention.
  */
-ENTRY(efi_enter32)
+SYM_FUNC_START_LOCAL(efi_enter32)
 	movl	$__KERNEL_DS, %eax
 	movl	%eax, %ds
 	movl	%eax, %es
@@ -145,7 +145,7 @@ ENTRY(efi_enter32)
 	pushl	%eax
 
 	lret
-ENDPROC(efi_enter32)
+SYM_FUNC_END(efi_enter32)
 
 	.data
 	.balign	8
arch/x86/platform/pvh/head.S +2 -2
index 4e63480bb223..43b4d864817e 100644
@@ -50,7 +50,7 @@
 #define PVH_DS_SEL		(PVH_GDT_ENTRY_DS * 8)
 #define PVH_CANARY_SEL		(PVH_GDT_ENTRY_CANARY * 8)
 
-ENTRY(pvh_start_xen)
+SYM_CODE_START_LOCAL(pvh_start_xen)
 	cld
 
 	lgdt (_pa(gdt))
@@ -146,7 +146,7 @@ ENTRY(pvh_start_xen)
 
 	ljmp $PVH_CS_SEL, $_pa(startup_32)
 #endif
-END(pvh_start_xen)
+SYM_CODE_END(pvh_start_xen)
 
 	.section ".init.data","aw"
 	.balign 8
Signature · 1 line
2.23.0
merge bot Applied
#48 lore raw

[tip: x86/asm] x86/asm: Make some functions local

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     ef1e03152cb027d5925646d4d1772ced7595292f
Gitweb:        https://git.kernel.org/tip/ef1e03152cb027d5925646d4d1772ced7595292f
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:51:00 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:34:39 +02:00

x86/asm: Make some functions local

There are a couple of assembly functions which are invoked only locally in the file they are defined. In C, they are marked "static". In assembly, annotate them using SYM_{FUNC,CODE}_START_LOCAL (and switch their ENDPROC to SYM_{FUNC,CODE}_END too). Whether FUNC or CODE is used, depends on whether ENDPROC or END was used for a particular function before.

Cc Andy Lutomirski <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc Ard Biesheuvel <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Darren Hart <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Juergen Gross <[email protected]>
Cc linux-efi <[email protected]>
Cc Matt Fleming <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stefano Stabellini <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/boot/compressed/efi_thunk_64.S |  8 ++++----
 arch/x86/entry/entry_64.S               | 21 +++++++++++----------
 arch/x86/lib/copy_page_64.S             |  4 ++--
 arch/x86/lib/memcpy_64.S                | 12 ++++++------
 arch/x86/lib/memset_64.S                |  8 ++++----
 arch/x86/platform/efi/efi_thunk_64.S    | 12 ++++++------
 arch/x86/platform/pvh/head.S            |  4 ++--
 7 files changed, 35 insertions(+), 34 deletions(-)
arch/x86/boot/compressed/efi_thunk_64.S +4 -4
index d66000d..3131207 100644
@@ -99,12 +99,12 @@ ENTRY(efi64_thunk)
 	ret
 ENDPROC(efi64_thunk)
 
-ENTRY(efi_exit32)
+SYM_FUNC_START_LOCAL(efi_exit32)
 	movq	func_rt_ptr(%rip), %rax
 	push	%rax
 	mov	%rdi, %rax
 	ret
-ENDPROC(efi_exit32)
+SYM_FUNC_END(efi_exit32)
 
 	.code32
 /*
@@ -112,7 +112,7 @@ ENDPROC(efi_exit32)
  *
  * The stack should represent the 32-bit calling convention.
  */
-ENTRY(efi_enter32)
+SYM_FUNC_START_LOCAL(efi_enter32)
 	movl	$__KERNEL_DS, %eax
 	movl	%eax, %ds
 	movl	%eax, %es
@@ -172,7 +172,7 @@ ENTRY(efi_enter32)
 	btsl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 	lret
-ENDPROC(efi_enter32)
+SYM_FUNC_END(efi_enter32)
 
 	.data
 	.balign	8
arch/x86/entry/entry_64.S +11 -10
index 57d2460..1568da6 100644
@@ -1101,7 +1101,8 @@ idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0
  * existing activation in its critical region -- if so, we pop the current
  * activation and restart the handler using the previous one.
  */
-ENTRY(xen_do_hypervisor_callback)		/* do_hypervisor_callback(struct *pt_regs) */
+/* do_hypervisor_callback(struct *pt_regs) */
+SYM_CODE_START_LOCAL(xen_do_hypervisor_callback)
 
 /*
  * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
@@ -1119,7 +1120,7 @@ ENTRY(xen_do_hypervisor_callback)		/* do_hypervisor_callback(struct *pt_regs) */
 	call	xen_maybe_preempt_hcall
 #endif
 	jmp	error_exit
-END(xen_do_hypervisor_callback)
+SYM_CODE_END(xen_do_hypervisor_callback)
 
 /*
  * Hypervisor uses this for application faults while it executes.
@@ -1214,7 +1215,7 @@ idtentry machine_check		do_mce			has_error_code=0	paranoid=1
  * Use slow, but surefire "are we in kernel?" check.
  * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
  */
-ENTRY(paranoid_entry)
+SYM_CODE_START_LOCAL(paranoid_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
@@ -1248,7 +1249,7 @@ ENTRY(paranoid_entry)
 	FENCE_SWAPGS_KERNEL_ENTRY
 
 	ret
-END(paranoid_entry)
+SYM_CODE_END(paranoid_entry)
 
 /*
  * "Paranoid" exit path from exception stack.  This is invoked
@@ -1262,7 +1263,7 @@ END(paranoid_entry)
  *
  * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
  */
-ENTRY(paranoid_exit)
+SYM_CODE_START_LOCAL(paranoid_exit)
 	UNWIND_HINT_REGS
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF_DEBUG
@@ -1279,12 +1280,12 @@ ENTRY(paranoid_exit)
 	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
 .Lparanoid_exit_restore:
 	jmp restore_regs_and_return_to_kernel
-END(paranoid_exit)
+SYM_CODE_END(paranoid_exit)
 
 /*
  * Save all registers in pt_regs, and switch GS if needed.
  */
-ENTRY(error_entry)
+SYM_CODE_START_LOCAL(error_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
@@ -1364,16 +1365,16 @@ ENTRY(error_entry)
 	call	fixup_bad_iret
 	mov	%rax, %rsp
 	jmp	.Lerror_entry_from_usermode_after_swapgs
-END(error_entry)
+SYM_CODE_END(error_entry)
 
-ENTRY(error_exit)
+SYM_CODE_START_LOCAL(error_exit)
 	UNWIND_HINT_REGS
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	testb	$3, CS(%rsp)
 	jz	retint_kernel
 	jmp	.Lretint_user
-END(error_exit)
+SYM_CODE_END(error_exit)
 
 /*
  * Runs on exception stack.  Xen PV does not go through this path at all,
arch/x86/lib/copy_page_64.S +2 -2
index fd2d09a..f505870 100644
@@ -21,7 +21,7 @@ ENTRY(copy_page)
 ENDPROC(copy_page)
 EXPORT_SYMBOL(copy_page)
 
-ENTRY(copy_page_regs)
+SYM_FUNC_START_LOCAL(copy_page_regs)
 	subq	$2*8,	%rsp
 	movq	%rbx,	(%rsp)
 	movq	%r12,	1*8(%rsp)
@@ -86,4 +86,4 @@ ENTRY(copy_page_regs)
 	movq	1*8(%rsp), %r12
 	addq	$2*8, %rsp
 	ret
-ENDPROC(copy_page_regs)
+SYM_FUNC_END(copy_page_regs)
arch/x86/lib/memcpy_64.S +6 -6
index 57a6426..3265b21 100644
@@ -29,7 +29,7 @@
  * rax original destination
  */
 SYM_FUNC_START_ALIAS(__memcpy)
-ENTRY(memcpy)
+SYM_FUNC_START_LOCAL(memcpy)
 	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp memcpy_erms", X86_FEATURE_ERMS
 
@@ -41,7 +41,7 @@ ENTRY(memcpy)
 	movl %edx, %ecx
 	rep movsb
 	ret
-ENDPROC(memcpy)
+SYM_FUNC_END(memcpy)
 SYM_FUNC_END_ALIAS(__memcpy)
 EXPORT_SYMBOL(memcpy)
 EXPORT_SYMBOL(__memcpy)
@@ -50,14 +50,14 @@ EXPORT_SYMBOL(__memcpy)
  * memcpy_erms() - enhanced fast string memcpy. This is faster and
  * simpler than memcpy. Use memcpy_erms when possible.
  */
-ENTRY(memcpy_erms)
+SYM_FUNC_START_LOCAL(memcpy_erms)
 	movq %rdi, %rax
 	movq %rdx, %rcx
 	rep movsb
 	ret
-ENDPROC(memcpy_erms)
+SYM_FUNC_END(memcpy_erms)
 
-ENTRY(memcpy_orig)
+SYM_FUNC_START_LOCAL(memcpy_orig)
 	movq %rdi, %rax
 
 	cmpq $0x20, %rdx
@@ -182,7 +182,7 @@ ENTRY(memcpy_orig)
 
 .Lend:
 	retq
-ENDPROC(memcpy_orig)
+SYM_FUNC_END(memcpy_orig)
 
 #ifndef CONFIG_UML
 
arch/x86/lib/memset_64.S +4 -4
index 927ac44..564abf9 100644
@@ -59,16 +59,16 @@ EXPORT_SYMBOL(__memset)
  *
  * rax   original destination
  */
-ENTRY(memset_erms)
+SYM_FUNC_START_LOCAL(memset_erms)
 	movq %rdi,%r9
 	movb %sil,%al
 	movq %rdx,%rcx
 	rep stosb
 	movq %r9,%rax
 	ret
-ENDPROC(memset_erms)
+SYM_FUNC_END(memset_erms)
 
-ENTRY(memset_orig)
+SYM_FUNC_START_LOCAL(memset_orig)
 	movq %rdi,%r10
 
 	/* expand byte value  */
@@ -139,4 +139,4 @@ ENTRY(memset_orig)
 	subq %r8,%rdx
 	jmp .Lafter_bad_alignment
 .Lfinal:
-ENDPROC(memset_orig)
+SYM_FUNC_END(memset_orig)
arch/x86/platform/efi/efi_thunk_64.S +6 -6
index 46c58b0..d677a7e 100644
@@ -67,7 +67,7 @@ ENDPROC(efi64_thunk)
  *
  * This function must be invoked with a 1:1 mapped stack.
  */
-ENTRY(__efi64_thunk)
+SYM_FUNC_START_LOCAL(__efi64_thunk)
 	movl	%ds, %eax
 	push	%rax
 	movl	%es, %eax
@@ -114,14 +114,14 @@ ENTRY(__efi64_thunk)
 	or	%rcx, %rax
 1:
 	ret
-ENDPROC(__efi64_thunk)
+SYM_FUNC_END(__efi64_thunk)
 
-ENTRY(efi_exit32)
+SYM_FUNC_START_LOCAL(efi_exit32)
 	movq	func_rt_ptr(%rip), %rax
 	push	%rax
 	mov	%rdi, %rax
 	ret
-ENDPROC(efi_exit32)
+SYM_FUNC_END(efi_exit32)
 
 	.code32
 /*
@@ -129,7 +129,7 @@ ENDPROC(efi_exit32)
  *
  * The stack should represent the 32-bit calling convention.
  */
-ENTRY(efi_enter32)
+SYM_FUNC_START_LOCAL(efi_enter32)
 	movl	$__KERNEL_DS, %eax
 	movl	%eax, %ds
 	movl	%eax, %es
@@ -145,7 +145,7 @@ ENTRY(efi_enter32)
 	pushl	%eax
 
 	lret
-ENDPROC(efi_enter32)
+SYM_FUNC_END(efi_enter32)
 
 	.data
 	.balign	8
arch/x86/platform/pvh/head.S +2 -2
index 4e63480..43b4d86 100644
@@ -50,7 +50,7 @@
 #define PVH_DS_SEL		(PVH_GDT_ENTRY_DS * 8)
 #define PVH_CANARY_SEL		(PVH_GDT_ENTRY_CANARY * 8)
 
-ENTRY(pvh_start_xen)
+SYM_CODE_START_LOCAL(pvh_start_xen)
 	cld
 
 	lgdt (_pa(gdt))
@@ -146,7 +146,7 @@ ENTRY(pvh_start_xen)
 
 	ljmp $PVH_CS_SEL, $_pa(startup_32)
 #endif
-END(pvh_start_xen)
+SYM_CODE_END(pvh_start_xen)
 
 	.section ".init.data","aw"
 	.balign 8

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

author
#49 lore raw

PATCH v9 21/28 x86/asm/ftrace: Mark function_hook as function

In reply to Jiri Slaby

Relabel function_hook to be marked really as a function. It is called from C and has the same expectations towards the stack etc.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/kernel/ftrace_32.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/ftrace_32.S +2 -2
index e0061dc976e1..219be1309c37 100644
@@ -21,9 +21,9 @@ EXPORT_SYMBOL(__fentry__)
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-ENTRY(function_hook)
+SYM_FUNC_START(function_hook)
 	ret
-END(function_hook)
+SYM_FUNC_END(function_hook)
 
 ENTRY(ftrace_caller)
 
Signature · 1 line
2.23.0
merge bot Applied
#50 lore raw

[tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     f13ad88a984e8090226a8f62d75e87b770eefdf4
Gitweb:        https://git.kernel.org/tip/f13ad88a984e8090226a8f62d75e87b770eefdf4
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:51:01 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:35:41 +02:00

x86/asm/ftrace: Mark function_hook as function

Relabel function_hook to be marked really as a function. It is called from C and has the same expectations towards the stack etc.

Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Masami Hiramatsu <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/kernel/ftrace_32.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/ftrace_32.S +2 -2
index e0061dc..219be13 100644
@@ -21,9 +21,9 @@ EXPORT_SYMBOL(__fentry__)
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-ENTRY(function_hook)
+SYM_FUNC_START(function_hook)
 	ret
-END(function_hook)
+SYM_FUNC_END(function_hook)
 
 ENTRY(ftrace_caller)
 
maintainer
#51 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 8 lines · On Fri, 18 Oct 2019 16:30:27 -0000 "tip-bot2 for Jiri Slaby"…

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     f13ad88a984e8090226a8f62d75e87b770eefdf4
Gitweb:        https://git.kernel.org/tip/f13ad88a984e8090226a8f62d75e87b770eefdf4
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:51:01 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:35:41 +02:00

I just noticed this (sorry missed the original patch).

Quoted 5 lines

x86/asm/ftrace: Mark function_hook as function

Relabel function_hook to be marked really as a function. It is called from C and has the same expectations towards the stack etc.

This is wrong, function_hook is never called from C. It's called via fentry (use to be mcount), and does not have the same semantics as a C function. In fact, that's why it exists in assembly. Because it has to save and restore registers to make it possible to call a C function!

-- Steve

Quoted 33 lines
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Masami Hiramatsu <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/kernel/ftrace_32.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/ftrace_32.S +2 -2
index e0061dc..219be13 100644
@@ -21,9 +21,9 @@ EXPORT_SYMBOL(__fentry__)
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-ENTRY(function_hook)
+SYM_FUNC_START(function_hook)
 	ret
-END(function_hook)
+SYM_FUNC_END(function_hook)
 
 ENTRY(ftrace_caller)
 
maintainer
#52 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 3 lines · On Fri, 18 Oct 2019 12:48:00 -0400 Steven Rostedt <[email protected]> wrote:
Quoted 2 lines

Relabel function_hook to be marked really as a function. It is called from C and has the same expectations towards the stack etc.

And to go even further, it *does not* have the same expectations towards the stack.

I think this patch should not be applied.

-- Steve

#53 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 11 lines · Steven Rostedt
Quoted 3 lines · On Fri, 18 Oct 2019 12:48:00 -0400 Steven Rostedt <[email protected]> wrote:
Quoted 2 lines

Relabel function_hook to be marked really as a function. It is called from C and has the same expectations towards the stack etc.

And to go even further, it *does not* have the same expectations towards the stack.

I think this patch should not be applied.

There are a couple more markings like that now:

$ git grep function_hook
Documentation/asm-annotations.rst:120:    SYM_FUNC_START(function_hook)
Documentation/asm-annotations.rst:122:    SYM_FUNC_END(function_hook)
arch/x86/kernel/ftrace_32.S:15:# define function_hook   __fentry__
arch/x86/kernel/ftrace_32.S:24:SYM_FUNC_START(function_hook)
arch/x86/kernel/ftrace_32.S:26:SYM_FUNC_END(function_hook)
arch/x86/kernel/ftrace_64.S:17:# define function_hook   __fentry__
arch/x86/kernel/ftrace_64.S:135:SYM_FUNC_START(function_hook)
arch/x86/kernel/ftrace_64.S:137:SYM_FUNC_END(function_hook)
arch/x86/kernel/ftrace_64.S:251:SYM_FUNC_START(function_hook)
arch/x86/kernel/ftrace_64.S:282:SYM_FUNC_END(function_hook)

Frankly, I wouldn't mark this function at all as it is special and I see a little sense to have it in stack traces but maybe Jiri has another angle here. I'll let him comment.

I guess with the new nomenclature that can be SYM_CODE_* now...

Then, this magic "function" or a global symbol with an address or whatever that is (oh, there's #define trickery too) definitely deserves a comment above it to explain what it is. I even have to build the .s file to see what it turns into:

.globl __fentry__ ; .p2align 4, 0x90 ; __fentry__:
retq
.type __fentry__, @function ; .size __fentry__, .-__fentry__

Yeah, it is called on every function entry:

callq ffffffff81a01760 <__fentry__>

but can we please explain with a comment above it what it is?

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer, HRB 36809, AG Nürnberg
maintainer
#54 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 27 lines · On Fri, 18 Oct 2019 19:13:54 +0200 Borislav Petkov <[email protected]> wrote:
Quoted 11 lines · Steven Rostedt
Quoted 3 lines · On Fri, 18 Oct 2019 12:48:00 -0400 Steven Rostedt <[email protected]> wrote:
Quoted 2 lines

Relabel function_hook to be marked really as a function. It is called from C and has the same expectations towards the stack etc.

And to go even further, it *does not* have the same expectations towards the stack.

I think this patch should not be applied.

There are a couple more markings like that now:

$ git grep function_hook
Documentation/asm-annotations.rst:120:    SYM_FUNC_START(function_hook)
Documentation/asm-annotations.rst:122:    SYM_FUNC_END(function_hook)
arch/x86/kernel/ftrace_32.S:15:# define function_hook   __fentry__
arch/x86/kernel/ftrace_32.S:24:SYM_FUNC_START(function_hook)
arch/x86/kernel/ftrace_32.S:26:SYM_FUNC_END(function_hook)
arch/x86/kernel/ftrace_64.S:17:# define function_hook   __fentry__
arch/x86/kernel/ftrace_64.S:135:SYM_FUNC_START(function_hook)
arch/x86/kernel/ftrace_64.S:137:SYM_FUNC_END(function_hook)
arch/x86/kernel/ftrace_64.S:251:SYM_FUNC_START(function_hook)
arch/x86/kernel/ftrace_64.S:282:SYM_FUNC_END(function_hook)
Quoted 3 lines

Frankly, I wouldn't mark this function at all as it is special and I see a little sense to have it in stack traces but maybe Jiri has another angle here. I'll let him comment.

It just needs to be visible by modules and what not, otherwise linking will fail.

Quoted 7 lines

I guess with the new nomenclature that can be SYM_CODE_* now...

Then, this magic "function" or a global symbol with an address or whatever that is (oh, there's #define trickery too) definitely deserves a comment above it to explain what it is. I even have to build the .s file to see what it turns into:

The #define was because we use to support mcount or __fentry__, now we just support __fentry__, and function_hook describes it better ;-)

Quoted 10 lines

.globl __fentry__ ; .p2align 4, 0x90 ; __fentry__:
retq
.type __fentry__, @function ; .size __fentry__, .-__fentry__

Yeah, it is called on every function entry:

callq ffffffff81a01760 <__fentry__>

but can we please explain with a comment above it what it is?

Heh, I guess we could, which would probably be quite a long comment as it's the key behind ftrace itself.

-- Steve

#55 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 2 lines · Steven Rostedt

It just needs to be visible by modules and what not, otherwise linking will fail.

And I assume all of them?

Quoted 2 lines

The #define was because we use to support mcount or __fentry__, now we just support __fentry__, and function_hook describes it better ;-)

Well sorry but gcc documentation talks about __fentry__. I'd keep the same name to avoid confusion and explain above it what it is. Much better.

Quoted 2 lines

Heh, I guess we could, which would probably be quite a long comment as it's the key behind ftrace itself.

Well, you can explain with a couple of sentences what it is and then point at the bigger document explaining ftrace. Provided, Mr. Rostedt, you'll stop doing talks and finally sit down and write that documentation!

:-P

Signature · 4 lines
Regards/Gruss,
    Boris.

SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer, HRB 36809, AG Nürnberg
maintainer
#56 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 6 lines · On Fri, 18 Oct 2019 21:48:56 +0200 Borislav Petkov <[email protected]> wrote:
Quoted 2 lines

The #define was because we use to support mcount or __fentry__, now we just support __fentry__, and function_hook describes it better ;-)

Well sorry but gcc documentation talks about __fentry__. I'd keep the same name to avoid confusion and explain above it what it is. Much better.

Still looks ugly ;-)

Quoted 8 lines
Quoted 3 lines

Heh, I guess we could, which would probably be quite a long comment as it's the key behind ftrace itself.

Well, you can explain with a couple of sentences what it is and then point at the bigger document explaining ftrace. Provided, Mr. Rostedt, you'll stop doing talks and finally sit down and write that documentation!

I do the talks hoping someone else will finally sit down and write the documentation!

-- Steve

#57 lore raw

Re: [tip: x86/asm] x86/asm/ftrace: Mark function_hook as function

Quoted 1 line · Steven Rostedt

Still looks ugly ;-)

See below. I think it's not so bad. It is only built-tested on 64-bit and objtool complains about something again:

arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction

but I think it is the better thing to do.

Quoted 2 lines

I do the talks hoping someone else will finally sit down and write the documentation!

Well, you can put down the outline of the doc and flesh out section by section gradually. Besides, you have all the text in your slides so it is actually more or less a copy+paste.

---

Documentation/asm-annotations.rst +2 -2
index 29ccd6e61fe5..f55c2bb74d00 100644
@@ -117,9 +117,9 @@ This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
   So in most cases, developers should write something like in the following
   example, having some asm instructions in between the macros, of course::
 
-    SYM_FUNC_START(function_hook)
+    SYM_FUNC_START(memset)
         ... asm insns ...
-    SYM_FUNC_END(function_hook)
+    SYM_FUNC_END(memset)
 
   In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
   and ``ENDPROC`` macros.
arch/x86/kernel/ftrace_32.S +3 -5
index 8ed1f5d371f0..77be7e7e5e59 100644
@@ -12,18 +12,16 @@
 #include <asm/frame.h>
 #include <asm/asm-offsets.h>
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 # define MCOUNT_FRAME			1	/* using frame = true  */
 #else
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	ret
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_CODE_START(ftrace_caller)
 
arch/x86/kernel/ftrace_64.S +6 -7
index 69c8d1b9119e..3029fe4f8547 100644
@@ -14,9 +14,6 @@
 	.code64
 	.section .entry.text, "ax"
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 /* Save parent and function stack frames (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16*2)
@@ -132,9 +129,10 @@ EXPORT_SYMBOL(__fentry__)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	retq
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_FUNC_START(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
@@ -248,7 +246,7 @@ SYM_FUNC_END(ftrace_regs_caller)
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace
 
@@ -279,7 +277,8 @@ trace:
 	restore_mcount_regs
 
 	jmp fgraph_trace
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
Signature · 4 lines
Regards/Gruss,
    Boris.

SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer, HRB 36809, AG Nürnberg
maintainer
#58 lore raw

PATCH 1/1 x86/ftrace: Get rid of function_hook

From: Borislav Petkov <[email protected]>

function_hook is used as a better name than the default __fentry__ which is the profiling counter which gcc adds before every function's prologue. Thus, it is not called from C and cannot have the same semantics as a pure C function - it saves/restores regs so that a C function can be called.

Drop the function_hook symbol and use __fentry__ directly for better alignment with gcc's documentation.

Switch the marking to SYM_CODE_START/_END which is reserved for non-standard, special functions.

Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Slaby <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 Documentation/asm-annotations.rst |  4 ++--
 arch/x86/kernel/ftrace_32.S       |  8 +++-----
 arch/x86/kernel/ftrace_64.S       | 13 ++++++-------
 3 files changed, 11 insertions(+), 14 deletions(-)
Documentation/asm-annotations.rst +2 -2
index 29ccd6e61fe5..f55c2bb74d00 100644
@@ -117,9 +117,9 @@ This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
   So in most cases, developers should write something like in the following
   example, having some asm instructions in between the macros, of course::
 
-    SYM_FUNC_START(function_hook)
+    SYM_FUNC_START(memset)
         ... asm insns ...
-    SYM_FUNC_END(function_hook)
+    SYM_FUNC_END(memset)
 
   In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
   and ``ENDPROC`` macros.
arch/x86/kernel/ftrace_32.S +3 -5
index 8ed1f5d371f0..77be7e7e5e59 100644
@@ -12,18 +12,16 @@
 #include <asm/frame.h>
 #include <asm/asm-offsets.h>
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 # define MCOUNT_FRAME			1	/* using frame = true  */
 #else
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	ret
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_CODE_START(ftrace_caller)
 
arch/x86/kernel/ftrace_64.S +6 -7
index 69c8d1b9119e..3029fe4f8547 100644
@@ -14,9 +14,6 @@
 	.code64
 	.section .entry.text, "ax"
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 /* Save parent and function stack frames (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16*2)
@@ -132,9 +129,10 @@ EXPORT_SYMBOL(__fentry__)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	retq
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_FUNC_START(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
@@ -248,7 +246,7 @@ SYM_FUNC_END(ftrace_regs_caller)
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace
 
@@ -279,7 +277,8 @@ trace:
 	restore_mcount_regs
 
 	jmp fgraph_trace
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
Signature · 8 lines
2.21.0


-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
maintainer
#59 lore raw

Re: [PATCH] x86/ftrace: Get rid of function_hook

Quoted 8 lines · On Mon, 21 Oct 2019 16:10:38 +0200 Borislav Petkov <[email protected]> wrote:

From: Borislav Petkov <[email protected]>

function_hook is used as a better name than the default __fentry__ which is the profiling counter which gcc adds before every function's prologue. Thus, it is not called from C and cannot have the same semantics as a pure C function - it saves/restores regs so that a C function can be called.

Quoted 5 lines

Drop the function_hook symbol and use __fentry__ directly for better alignment with gcc's documentation.

Switch the marking to SYM_CODE_START/_END which is reserved for non-standard, special functions.

I would break this into two patches. One that removes the function_hook name, and the other to convert to the SYM_CODE_START/END.

For the removal of the function_hook patch, be sure to state some of the history for why the function_hook was created in the first place. Which would be something like this:

"When ftrace first was introduced to the kernel, it used gcc's mcount profiling mechanism. The mcount mechanism would add a call to "mcount" at the start of every function but after the stack frame was set up. Later, in gcc 4.6, gcc introduced -mfentry, that would create a call to "__fentry__" instead of "mcount", before the stack frame was set up. In order to handle both cases, ftrace defined a macro "function_hook" that would be either "mcount" or "__fentry__" depending on which one was being used.

The Linux kernel no longer supports the "mcount" method, thus there's no reason to keep the "function_hook" define around. Simply use "__fentry__", as there is no ambiguity to the name anymore."

-- Steve

Quoted 19 lines
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Slaby <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 Documentation/asm-annotations.rst |  4 ++--
 arch/x86/kernel/ftrace_32.S       |  8 +++-----
 arch/x86/kernel/ftrace_64.S       | 13 ++++++-------
 3 files changed, 11 insertions(+), 14 deletions(-)
author Acked-by on v1 1/1
#60 lore raw

Re: [PATCH] x86/ftrace: Get rid of function_hook

In reply to Borislav Petkov
Quoted 11 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

function_hook is used as a better name than the default __fentry__ which is the profiling counter which gcc adds before every function's prologue. Thus, it is not called from C and cannot have the same semantics as a pure C function - it saves/restores regs so that a C function can be called.

Drop the function_hook symbol and use __fentry__ directly for better alignment with gcc's documentation.

Quoted 7 lines

Switch the marking to SYM_CODE_START/_END which is reserved for non-standard, special functions.

Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Slaby <[email protected]>

On the top of Steven's comment:

Thanks for taking care of this while my tooth was causing me pain.

Quoted 103 lines
Cc Jonathan Corbet <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 Documentation/asm-annotations.rst |  4 ++--
 arch/x86/kernel/ftrace_32.S       |  8 +++-----
 arch/x86/kernel/ftrace_64.S       | 13 ++++++-------
 3 files changed, 11 insertions(+), 14 deletions(-)
Documentation/asm-annotations.rst +2 -2
index 29ccd6e61fe5..f55c2bb74d00 100644
@@ -117,9 +117,9 @@ This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
   So in most cases, developers should write something like in the following
   example, having some asm instructions in between the macros, of course::
 
-    SYM_FUNC_START(function_hook)
+    SYM_FUNC_START(memset)
         ... asm insns ...
-    SYM_FUNC_END(function_hook)
+    SYM_FUNC_END(memset)
 
   In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
   and ``ENDPROC`` macros.
arch/x86/kernel/ftrace_32.S +3 -5
index 8ed1f5d371f0..77be7e7e5e59 100644
@@ -12,18 +12,16 @@
 #include <asm/frame.h>
 #include <asm/asm-offsets.h>
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 # define MCOUNT_FRAME			1	/* using frame = true  */
 #else
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	ret
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_CODE_START(ftrace_caller)
 
arch/x86/kernel/ftrace_64.S +6 -7
index 69c8d1b9119e..3029fe4f8547 100644
@@ -14,9 +14,6 @@
 	.code64
 	.section .entry.text, "ax"
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 /* Save parent and function stack frames (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16*2)
@@ -132,9 +129,10 @@ EXPORT_SYMBOL(__fentry__)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	retq
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_FUNC_START(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
@@ -248,7 +246,7 @@ SYM_FUNC_END(ftrace_regs_caller)
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
-SYM_FUNC_START(function_hook)
+SYM_CODE_START(__fentry__)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace
 
@@ -279,7 +277,8 @@ trace:
 	restore_mcount_regs
 
 	jmp fgraph_trace
-SYM_FUNC_END(function_hook)
+SYM_CODE_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
Signature · 2 lines
js
suse labs
maintainer
#61 lore raw

Re: [PATCH] x86/ftrace: Get rid of function_hook

Quoted 4 lines · Jiri Slaby

On the top of Steven's comment:

Thanks for taking care of this while my tooth was causing me pain.

Sure, np. Toothache is yuck.

Ok, so after some back'n'forth yesterday on IRC, I think we agree on only renaming function_hook but keeping its SYM_FUNC* annotation so that ORC can unwind into it because we're fancy and we do all kinds of unwinding from interrupts in ftrace handlers and all that other fun. So it needs to know that that thing is a function.

So here it is as a proper patch as a reply to this message.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
maintainer
#62 lore raw

PATCH 1/1 x86/ftrace: Get rid of function_hook

From: Borislav Petkov <[email protected]>

History lesson courtesy of Steve:

"When ftrace first was introduced to the kernel, it used gcc's mcount profiling mechanism. The mcount mechanism would add a call to "mcount" at the start of every function but after the stack frame was set up. Later, in gcc 4.6, gcc introduced -mfentry, that would create a call to "__fentry__" instead of "mcount", before the stack frame was set up. In order to handle both cases, ftrace defined a macro "function_hook" that would be either "mcount" or "__fentry__" depending on which one was being used.

The Linux kernel no longer supports the "mcount" method, thus there's no reason to keep the "function_hook" define around. Simply use "__fentry__", as there is no ambiguity to the name anymore."

Drop it everywhere.

Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 Documentation/asm-annotations.rst |  4 ++--
 arch/x86/kernel/ftrace_32.S       |  8 +++-----
 arch/x86/kernel/ftrace_64.S       | 13 ++++++-------
 3 files changed, 11 insertions(+), 14 deletions(-)
Documentation/asm-annotations.rst +2 -2
index 29ccd6e61fe5..f55c2bb74d00 100644
@@ -117,9 +117,9 @@ This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
   So in most cases, developers should write something like in the following
   example, having some asm instructions in between the macros, of course::
 
-    SYM_FUNC_START(function_hook)
+    SYM_FUNC_START(memset)
         ... asm insns ...
-    SYM_FUNC_END(function_hook)
+    SYM_FUNC_END(memset)
 
   In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
   and ``ENDPROC`` macros.
arch/x86/kernel/ftrace_32.S +3 -5
index 8ed1f5d371f0..e8a9f8370112 100644
@@ -12,18 +12,16 @@
 #include <asm/frame.h>
 #include <asm/asm-offsets.h>
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 # define MCOUNT_FRAME			1	/* using frame = true  */
 #else
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-SYM_FUNC_START(function_hook)
+SYM_FUNC_START(__fentry__)
 	ret
-SYM_FUNC_END(function_hook)
+SYM_FUNC_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_CODE_START(ftrace_caller)
 
arch/x86/kernel/ftrace_64.S +6 -7
index 69c8d1b9119e..6e8961ca3605 100644
@@ -14,9 +14,6 @@
 	.code64
 	.section .entry.text, "ax"
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 /* Save parent and function stack frames (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16*2)
@@ -132,9 +129,10 @@ EXPORT_SYMBOL(__fentry__)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-SYM_FUNC_START(function_hook)
+SYM_FUNC_START(__fentry__)
 	retq
-SYM_FUNC_END(function_hook)
+SYM_FUNC_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_FUNC_START(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
@@ -248,7 +246,7 @@ SYM_FUNC_END(ftrace_regs_caller)
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
-SYM_FUNC_START(function_hook)
+SYM_FUNC_START(__fentry__)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace
 
@@ -279,7 +277,8 @@ trace:
 	restore_mcount_regs
 
 	jmp fgraph_trace
-SYM_FUNC_END(function_hook)
+SYM_FUNC_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
Signature · 8 lines
2.21.0


-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#63 lore raw

[tip: x86/asm] x86/ftrace: Get rid of function_hook

In reply to Steven Rostedt
The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     0f42c1ad44d437f75b840b572376fd538fbb9643
Gitweb:        https://git.kernel.org/tip/0f42c1ad44d437f75b840b572376fd538fbb9643
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Mon, 21 Oct 2019 17:18:23 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 25 Oct 2019 10:52:22 +02:00

x86/ftrace: Get rid of function_hook

History lesson courtesy of Steve:

"When ftrace first was introduced to the kernel, it used gcc's mcount profiling mechanism. The mcount mechanism would add a call to "mcount" at the start of every function but after the stack frame was set up. Later, in gcc 4.6, gcc introduced -mfentry, that would create a call to "__fentry__" instead of "mcount", before the stack frame was set up. In order to handle both cases, ftrace defined a macro "function_hook" that would be either "mcount" or "__fentry__" depending on which one was being used.

The Linux kernel no longer supports the "mcount" method, thus there's no reason to keep the "function_hook" define around. Simply use "__fentry__", as there is no ambiguity to the name anymore."

Drop it everywhere.

---
 Documentation/asm-annotations.rst |  4 ++--
 arch/x86/kernel/ftrace_32.S       |  8 +++-----
 arch/x86/kernel/ftrace_64.S       | 13 ++++++-------
 3 files changed, 11 insertions(+), 14 deletions(-)
Documentation/asm-annotations.rst +2 -2
index 29ccd6e..f55c2bb 100644
@@ -117,9 +117,9 @@ This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
   So in most cases, developers should write something like in the following
   example, having some asm instructions in between the macros, of course::
 
-    SYM_FUNC_START(function_hook)
+    SYM_FUNC_START(memset)
         ... asm insns ...
-    SYM_FUNC_END(function_hook)
+    SYM_FUNC_END(memset)
 
   In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
   and ``ENDPROC`` macros.
arch/x86/kernel/ftrace_32.S +3 -5
index 8ed1f5d..e8a9f83 100644
@@ -12,18 +12,16 @@
 #include <asm/frame.h>
 #include <asm/asm-offsets.h>
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 # define MCOUNT_FRAME			1	/* using frame = true  */
 #else
 # define MCOUNT_FRAME			0	/* using frame = false */
 #endif
 
-SYM_FUNC_START(function_hook)
+SYM_FUNC_START(__fentry__)
 	ret
-SYM_FUNC_END(function_hook)
+SYM_FUNC_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_CODE_START(ftrace_caller)
 
arch/x86/kernel/ftrace_64.S +6 -7
index 69c8d1b..6e8961c 100644
@@ -14,9 +14,6 @@
 	.code64
 	.section .entry.text, "ax"
 
-# define function_hook	__fentry__
-EXPORT_SYMBOL(__fentry__)
-
 #ifdef CONFIG_FRAME_POINTER
 /* Save parent and function stack frames (rip and rbp) */
 #  define MCOUNT_FRAME_SIZE	(8+16*2)
@@ -132,9 +129,10 @@ EXPORT_SYMBOL(__fentry__)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-SYM_FUNC_START(function_hook)
+SYM_FUNC_START(__fentry__)
 	retq
-SYM_FUNC_END(function_hook)
+SYM_FUNC_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 
 SYM_FUNC_START(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
@@ -248,7 +246,7 @@ SYM_FUNC_END(ftrace_regs_caller)
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
-SYM_FUNC_START(function_hook)
+SYM_FUNC_START(__fentry__)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace
 
@@ -279,7 +277,8 @@ trace:
 	restore_mcount_regs
 
 	jmp fgraph_trace
-SYM_FUNC_END(function_hook)
+SYM_FUNC_END(__fentry__)
+EXPORT_SYMBOL(__fentry__)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
author
#64 lore raw

PATCH v9 22/28 x86_64/asm: Add ENDs to some functions and relabel with SYM_CODE_*

In reply to Jiri Slaby

All these are functions which are invoked from elsewhere, but they are not typical C functions. So they are annotated using the new SYM_CODE_START. All these were not balanced with any END, so mark their ends by SYM_CODE_END appropriately too.

Cc Borislav Petkov <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
---
 arch/x86/boot/compressed/head_64.S   |  6 ++++--
 arch/x86/platform/olpc/xo1-wakeup.S  |  3 ++-
 arch/x86/power/hibernate_asm_64.S    |  6 ++++--
 arch/x86/realmode/rm/reboot.S        |  3 ++-
 arch/x86/realmode/rm/trampoline_64.S | 10 +++++++---
 arch/x86/realmode/rm/wakeup_asm.S    |  3 ++-
 arch/x86/xen/xen-asm_64.S            |  6 ++++--
 7 files changed, 25 insertions(+), 12 deletions(-)
arch/x86/boot/compressed/head_64.S +4 -2
index ca762ea6a681..55800467ce5c 100644
@@ -250,7 +250,7 @@ ENDPROC(efi32_stub_entry)
 
 	.code64
 	.org 0x200
-ENTRY(startup_64)
+SYM_CODE_START(startup_64)
 	/*
 	 * 64bit entry is 0x200 and it is ABI so immutable!
 	 * We come here either from startup_32 or directly from a
@@ -442,6 +442,7 @@ trampoline_return:
  */
 	leaq	.Lrelocated(%rbx), %rax
 	jmp	*%rax
+SYM_CODE_END(startup_64)
 
 #ifdef CONFIG_EFI_STUB
 
@@ -571,7 +572,7 @@ SYM_FUNC_END(.Lrelocated)
  * ECX contains the base address of the trampoline memory.
  * Non zero RDX means trampoline needs to enable 5-level paging.
  */
-ENTRY(trampoline_32bit_src)
+SYM_CODE_START(trampoline_32bit_src)
 	/* Set up data and stack segments */
 	movl	$__KERNEL_DS, %eax
 	movl	%eax, %ds
@@ -634,6 +635,7 @@ ENTRY(trampoline_32bit_src)
 	movl	%eax, %cr0
 
 	lret
+SYM_CODE_END(trampoline_32bit_src)
 
 	.code64
 SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
arch/x86/platform/olpc/xo1-wakeup.S +2 -1
index 5fee3a2c2fd4..75f4faff8468 100644
@@ -90,7 +90,7 @@ restore_registers:
 
 	ret
 
-ENTRY(do_olpc_suspend_lowlevel)
+SYM_CODE_START(do_olpc_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
 
@@ -110,6 +110,7 @@ ret_point:
 	call	restore_registers
 	call	restore_processor_state
 	ret
+SYM_CODE_END(do_olpc_suspend_lowlevel)
 
 .data
 saved_gdt:             .long   0,0
arch/x86/power/hibernate_asm_64.S +4 -2
index a4d5eb0a7ece..4057cd5af7e2 100644
@@ -52,7 +52,7 @@ ENTRY(swsusp_arch_suspend)
 	ret
 ENDPROC(swsusp_arch_suspend)
 
-ENTRY(restore_image)
+SYM_CODE_START(restore_image)
 	/* prepare to jump to the image kernel */
 	movq	restore_jump_address(%rip), %r8
 	movq	restore_cr3(%rip), %r9
@@ -67,9 +67,10 @@ ENTRY(restore_image)
 	/* jump to relocated restore code */
 	movq	relocated_restore_code(%rip), %rcx
 	jmpq	*%rcx
+SYM_CODE_END(restore_image)
 
 	/* code below has been relocated to a safe page */
-ENTRY(core_restore_code)
+SYM_CODE_START(core_restore_code)
 	/* switch to temporary page tables */
 	movq	%rax, %cr3
 	/* flush TLB */
@@ -97,6 +98,7 @@ ENTRY(core_restore_code)
 .Ldone:
 	/* jump to the restore_registers address from the image header */
 	jmpq	*%r8
+SYM_CODE_END(core_restore_code)
 
 	 /* code below belongs to the image kernel */
 	.align PAGE_SIZE
arch/x86/realmode/rm/reboot.S +2 -1
index 424826afb501..f10515b10e0a 100644
@@ -19,7 +19,7 @@
  */
 	.section ".text32", "ax"
 	.code32
-ENTRY(machine_real_restart_asm)
+SYM_CODE_START(machine_real_restart_asm)
 
 #ifdef CONFIG_X86_64
 	/* Switch to trampoline GDT as it is guaranteed < 4 GiB */
@@ -63,6 +63,7 @@ SYM_INNER_LABEL(machine_real_restart_paging_off, SYM_L_GLOBAL)
 	movl	%ecx, %gs
 	movl	%ecx, %ss
 	ljmpw	$8, $1f
+SYM_CODE_END(machine_real_restart_asm)
 
 /*
  * This is 16-bit protected mode code to disable paging and the cache,
arch/x86/realmode/rm/trampoline_64.S +7 -3
index c1aeab1dae25..251758ed7443 100644
@@ -38,7 +38,7 @@
 	.code16
 
 	.balign	PAGE_SIZE
-ENTRY(trampoline_start)
+SYM_CODE_START(trampoline_start)
 	cli			# We should be safe anyway
 	wbinvd
 
@@ -78,12 +78,14 @@ ENTRY(trampoline_start)
 no_longmode:
 	hlt
 	jmp no_longmode
+SYM_CODE_END(trampoline_start)
+
 #include "../kernel/verify_cpu.S"
 
 	.section ".text32","ax"
 	.code32
 	.balign 4
-ENTRY(startup_32)
+SYM_CODE_START(startup_32)
 	movl	%edx, %ss
 	addl	$pa_real_mode_base, %esp
 	movl	%edx, %ds
@@ -137,13 +139,15 @@ ENTRY(startup_32)
 	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
 	 */
 	ljmpl	$__KERNEL_CS, $pa_startup_64
+SYM_CODE_END(startup_32)
 
 	.section ".text64","ax"
 	.code64
 	.balign 4
-ENTRY(startup_64)
+SYM_CODE_START(startup_64)
 	# Now jump into the kernel using virtual addresses
 	jmpq	*tr_start(%rip)
+SYM_CODE_END(startup_64)
 
 	.section ".rodata","a"
 	# Duplicate the global descriptor table
arch/x86/realmode/rm/wakeup_asm.S +2 -1
index 01092d665bc2..02d0ba16ae33 100644
@@ -37,7 +37,7 @@ SYM_DATA_END(wakeup_header)
 	.code16
 
 	.balign	16
-ENTRY(wakeup_start)
+SYM_CODE_START(wakeup_start)
 	cli
 	cld
 
@@ -135,6 +135,7 @@ ENTRY(wakeup_start)
 #else
 	jmp	trampoline_start
 #endif
+SYM_CODE_END(wakeup_start)
 
 bogus_real_magic:
 1:
arch/x86/xen/xen-asm_64.S +4 -2
index 45c1249f370d..c209c70fc5e4 100644
@@ -85,11 +85,12 @@ hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
  *	r11		}<-- pushed by hypercall page
  * rsp->rax		}
  */
-ENTRY(xen_iret)
+SYM_CODE_START(xen_iret)
 	pushq $0
 	jmp hypercall_iret
+SYM_CODE_END(xen_iret)
 
-ENTRY(xen_sysret64)
+SYM_CODE_START(xen_sysret64)
 	/*
 	 * We're already on the usermode stack at this point, but
 	 * still with the kernel gs, so we can easily switch back.
@@ -107,6 +108,7 @@ ENTRY(xen_sysret64)
 
 	pushq $VGCF_in_syscall
 	jmp hypercall_iret
+SYM_CODE_END(xen_sysret64)
 
 /*
  * Xen handles syscall callbacks much like ordinary exceptions, which
Signature · 1 line
2.23.0
merge bot Applied
#65 lore raw

[tip: x86/asm] x86/asm/64: Add ENDs to some functions and relabel with SYM_CODE_*

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     4aec216b93dd8e3597124f41369ec835ff18dbd0
Gitweb:        https://git.kernel.org/tip/4aec216b93dd8e3597124f41369ec835ff18dbd0
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:51:02 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:58:16 +02:00

x86/asm/64: Add ENDs to some functions and relabel with SYM_CODE_*

All these are functions which are invoked from elsewhere but they are not typical C functions. So annotate them using the new SYM_CODE_START. All these were not balanced with any END, so mark their ends by SYM_CODE_END appropriately too.

---
 arch/x86/boot/compressed/head_64.S   |  6 ++++--
 arch/x86/platform/olpc/xo1-wakeup.S  |  3 ++-
 arch/x86/power/hibernate_asm_64.S    |  6 ++++--
 arch/x86/realmode/rm/reboot.S        |  3 ++-
 arch/x86/realmode/rm/trampoline_64.S | 10 +++++++---
 arch/x86/realmode/rm/wakeup_asm.S    |  3 ++-
 arch/x86/xen/xen-asm_64.S            |  6 ++++--
 7 files changed, 25 insertions(+), 12 deletions(-)
arch/x86/boot/compressed/head_64.S +4 -2
index ca762ea..5580046 100644
@@ -250,7 +250,7 @@ ENDPROC(efi32_stub_entry)
 
 	.code64
 	.org 0x200
-ENTRY(startup_64)
+SYM_CODE_START(startup_64)
 	/*
 	 * 64bit entry is 0x200 and it is ABI so immutable!
 	 * We come here either from startup_32 or directly from a
@@ -442,6 +442,7 @@ trampoline_return:
  */
 	leaq	.Lrelocated(%rbx), %rax
 	jmp	*%rax
+SYM_CODE_END(startup_64)
 
 #ifdef CONFIG_EFI_STUB
 
@@ -571,7 +572,7 @@ SYM_FUNC_END(.Lrelocated)
  * ECX contains the base address of the trampoline memory.
  * Non zero RDX means trampoline needs to enable 5-level paging.
  */
-ENTRY(trampoline_32bit_src)
+SYM_CODE_START(trampoline_32bit_src)
 	/* Set up data and stack segments */
 	movl	$__KERNEL_DS, %eax
 	movl	%eax, %ds
@@ -634,6 +635,7 @@ ENTRY(trampoline_32bit_src)
 	movl	%eax, %cr0
 
 	lret
+SYM_CODE_END(trampoline_32bit_src)
 
 	.code64
 SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
arch/x86/platform/olpc/xo1-wakeup.S +2 -1
index 5fee3a2..75f4faf 100644
@@ -90,7 +90,7 @@ restore_registers:
 
 	ret
 
-ENTRY(do_olpc_suspend_lowlevel)
+SYM_CODE_START(do_olpc_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
 
@@ -110,6 +110,7 @@ ret_point:
 	call	restore_registers
 	call	restore_processor_state
 	ret
+SYM_CODE_END(do_olpc_suspend_lowlevel)
 
 .data
 saved_gdt:             .long   0,0
arch/x86/power/hibernate_asm_64.S +4 -2
index a4d5eb0..4057cd5 100644
@@ -52,7 +52,7 @@ ENTRY(swsusp_arch_suspend)
 	ret
 ENDPROC(swsusp_arch_suspend)
 
-ENTRY(restore_image)
+SYM_CODE_START(restore_image)
 	/* prepare to jump to the image kernel */
 	movq	restore_jump_address(%rip), %r8
 	movq	restore_cr3(%rip), %r9
@@ -67,9 +67,10 @@ ENTRY(restore_image)
 	/* jump to relocated restore code */
 	movq	relocated_restore_code(%rip), %rcx
 	jmpq	*%rcx
+SYM_CODE_END(restore_image)
 
 	/* code below has been relocated to a safe page */
-ENTRY(core_restore_code)
+SYM_CODE_START(core_restore_code)
 	/* switch to temporary page tables */
 	movq	%rax, %cr3
 	/* flush TLB */
@@ -97,6 +98,7 @@ ENTRY(core_restore_code)
 .Ldone:
 	/* jump to the restore_registers address from the image header */
 	jmpq	*%r8
+SYM_CODE_END(core_restore_code)
 
 	 /* code below belongs to the image kernel */
 	.align PAGE_SIZE
arch/x86/realmode/rm/reboot.S +2 -1
index 424826a..f10515b 100644
@@ -19,7 +19,7 @@
  */
 	.section ".text32", "ax"
 	.code32
-ENTRY(machine_real_restart_asm)
+SYM_CODE_START(machine_real_restart_asm)
 
 #ifdef CONFIG_X86_64
 	/* Switch to trampoline GDT as it is guaranteed < 4 GiB */
@@ -63,6 +63,7 @@ SYM_INNER_LABEL(machine_real_restart_paging_off, SYM_L_GLOBAL)
 	movl	%ecx, %gs
 	movl	%ecx, %ss
 	ljmpw	$8, $1f
+SYM_CODE_END(machine_real_restart_asm)
 
 /*
  * This is 16-bit protected mode code to disable paging and the cache,
arch/x86/realmode/rm/trampoline_64.S +7 -3
index c1aeab1..251758e 100644
@@ -38,7 +38,7 @@
 	.code16
 
 	.balign	PAGE_SIZE
-ENTRY(trampoline_start)
+SYM_CODE_START(trampoline_start)
 	cli			# We should be safe anyway
 	wbinvd
 
@@ -78,12 +78,14 @@ ENTRY(trampoline_start)
 no_longmode:
 	hlt
 	jmp no_longmode
+SYM_CODE_END(trampoline_start)
+
 #include "../kernel/verify_cpu.S"
 
 	.section ".text32","ax"
 	.code32
 	.balign 4
-ENTRY(startup_32)
+SYM_CODE_START(startup_32)
 	movl	%edx, %ss
 	addl	$pa_real_mode_base, %esp
 	movl	%edx, %ds
@@ -137,13 +139,15 @@ ENTRY(startup_32)
 	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
 	 */
 	ljmpl	$__KERNEL_CS, $pa_startup_64
+SYM_CODE_END(startup_32)
 
 	.section ".text64","ax"
 	.code64
 	.balign 4
-ENTRY(startup_64)
+SYM_CODE_START(startup_64)
 	# Now jump into the kernel using virtual addresses
 	jmpq	*tr_start(%rip)
+SYM_CODE_END(startup_64)
 
 	.section ".rodata","a"
 	# Duplicate the global descriptor table
arch/x86/realmode/rm/wakeup_asm.S +2 -1
index 01092d6..02d0ba1 100644
@@ -37,7 +37,7 @@ SYM_DATA_END(wakeup_header)
 	.code16
 
 	.balign	16
-ENTRY(wakeup_start)
+SYM_CODE_START(wakeup_start)
 	cli
 	cld
 
@@ -135,6 +135,7 @@ ENTRY(wakeup_start)
 #else
 	jmp	trampoline_start
 #endif
+SYM_CODE_END(wakeup_start)
 
 bogus_real_magic:
 1:
arch/x86/xen/xen-asm_64.S +4 -2
index 45c1249..c209c70 100644
@@ -85,11 +85,12 @@ hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
  *	r11		}<-- pushed by hypercall page
  * rsp->rax		}
  */
-ENTRY(xen_iret)
+SYM_CODE_START(xen_iret)
 	pushq $0
 	jmp hypercall_iret
+SYM_CODE_END(xen_iret)
 
-ENTRY(xen_sysret64)
+SYM_CODE_START(xen_sysret64)
 	/*
 	 * We're already on the usermode stack at this point, but
 	 * still with the kernel gs, so we can easily switch back.
@@ -107,6 +108,7 @@ ENTRY(xen_sysret64)
 
 	pushq $VGCF_in_syscall
 	jmp hypercall_iret
+SYM_CODE_END(xen_sysret64)
 
 /*
  * Xen handles syscall callbacks much like ordinary exceptions, which

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

author
#66 lore raw

PATCH v9 23/28 x86_64/asm: Change all ENTRY+END to SYM_CODE_*

In reply to Jiri Slaby

Here, all assembly code which is marked using END (and not ENDPROC) is changed. All these are switched to appropriate new markings SYM_CODE_START and SYM_CODE_END.

Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Juergen Gross <[email protected]>
---
 arch/x86/entry/entry_64.S        | 52 ++++++++++++++++----------------
 arch/x86/entry/entry_64_compat.S |  8 ++---
 arch/x86/kernel/ftrace_64.S      |  4 +--
 arch/x86/kernel/head_64.S        | 12 ++++----
 arch/x86/xen/xen-asm_64.S        |  8 ++---
 arch/x86/xen/xen-head.S          |  8 ++---
 6 files changed, 46 insertions(+), 46 deletions(-)
arch/x86/entry/entry_64.S +26 -26
index 1568da63bf16..13e4fe378e5a 100644
@@ -46,11 +46,11 @@
 .section .entry.text, "ax"
 
 #ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
+SYM_CODE_START(native_usergs_sysret64)
 	UNWIND_HINT_EMPTY
 	swapgs
 	sysretq
-END(native_usergs_sysret64)
+SYM_CODE_END(native_usergs_sysret64)
 #endif /* CONFIG_PARAVIRT */
 
 .macro TRACE_IRQS_FLAGS flags:req
@@ -142,7 +142,7 @@ END(native_usergs_sysret64)
  * with them due to bugs in both AMD and Intel CPUs.
  */
 
-ENTRY(entry_SYSCALL_64)
+SYM_CODE_START(entry_SYSCALL_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * Interrupts are off on entry.
@@ -273,13 +273,13 @@ syscall_return_via_sysret:
 	popq	%rdi
 	popq	%rsp
 	USERGS_SYSRET64
-END(entry_SYSCALL_64)
+SYM_CODE_END(entry_SYSCALL_64)
 
 /*
  * %rdi: prev task
  * %rsi: next task
  */
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
 	UNWIND_HINT_FUNC
 	/*
 	 * Save callee-saved registers
@@ -321,7 +321,7 @@ ENTRY(__switch_to_asm)
 	popq	%rbp
 
 	jmp	__switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
 
 /*
  * A newly forked process directly context switches into this address.
@@ -330,7 +330,7 @@ END(__switch_to_asm)
  * rbx: kernel thread func (NULL for user thread)
  * r12: kernel thread arg
  */
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
 	UNWIND_HINT_EMPTY
 	movq	%rax, %rdi
 	call	schedule_tail			/* rdi: 'prev' task parameter */
@@ -357,14 +357,14 @@ ENTRY(ret_from_fork)
 	 */
 	movq	$0, RAX(%rsp)
 	jmp	2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
 
 /*
  * Build the entry stubs with some assembler magic.
  * We pack 1 stub into every 8-byte block.
  */
 	.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
     vector=FIRST_EXTERNAL_VECTOR
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
 	UNWIND_HINT_IRET_REGS
@@ -373,10 +373,10 @@ ENTRY(irq_entries_start)
 	.align	8
 	vector=vector+1
     .endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
 
 	.align 8
-ENTRY(spurious_entries_start)
+SYM_CODE_START(spurious_entries_start)
     vector=FIRST_SYSTEM_VECTOR
     .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
 	UNWIND_HINT_IRET_REGS
@@ -385,7 +385,7 @@ ENTRY(spurious_entries_start)
 	.align	8
 	vector=vector+1
     .endr
-END(spurious_entries_start)
+SYM_CODE_END(spurious_entries_start)
 
 .macro DEBUG_ENTRY_ASSERT_IRQS_OFF
 #ifdef CONFIG_DEBUG_ENTRY
@@ -511,7 +511,7 @@ END(spurious_entries_start)
  * | return address					|
  * +----------------------------------------------------+
  */
-ENTRY(interrupt_entry)
+SYM_CODE_START(interrupt_entry)
 	UNWIND_HINT_FUNC
 	ASM_CLAC
 	cld
@@ -579,7 +579,7 @@ ENTRY(interrupt_entry)
 	TRACE_IRQS_OFF
 
 	ret
-END(interrupt_entry)
+SYM_CODE_END(interrupt_entry)
 _ASM_NOKPROBE(interrupt_entry)
 
 
@@ -795,7 +795,7 @@ _ASM_NOKPROBE(common_interrupt)
  * APIC interrupts.
  */
 .macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
+SYM_CODE_START(\sym)
 	UNWIND_HINT_IRET_REGS
 	pushq	$~(\num)
 .Lcommon_\sym:
@@ -803,7 +803,7 @@ ENTRY(\sym)
 	UNWIND_HINT_REGS indirect=1
 	call	\do_sym	/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(\sym)
+SYM_CODE_END(\sym)
 _ASM_NOKPROBE(\sym)
 .endm
 
@@ -968,7 +968,7 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
  * #DF: if the thread stack is somehow unusable, we'll still get a useful OOPS.
  */
 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ist_offset=0 create_gap=0 read_cr2=0
-ENTRY(\sym)
+SYM_CODE_START(\sym)
 	UNWIND_HINT_IRET_REGS offset=\has_error_code*8
 
 	/* Sanity check */
@@ -1018,7 +1018,7 @@ ENTRY(\sym)
 	.endif
 
 _ASM_NOKPROBE(\sym)
-END(\sym)
+SYM_CODE_END(\sym)
 .endm
 
 idtentry divide_error			do_divide_error			has_error_code=0
@@ -1135,7 +1135,7 @@ SYM_CODE_END(xen_do_hypervisor_callback)
  * We distinguish between categories by comparing each saved segment register
  * with its current contents: any discrepancy means we in category 1.
  */
-ENTRY(xen_failsafe_callback)
+SYM_CODE_START(xen_failsafe_callback)
 	UNWIND_HINT_EMPTY
 	movl	%ds, %ecx
 	cmpw	%cx, 0x10(%rsp)
@@ -1165,7 +1165,7 @@ ENTRY(xen_failsafe_callback)
 	PUSH_AND_CLEAR_REGS
 	ENCODE_FRAME_POINTER
 	jmp	error_exit
-END(xen_failsafe_callback)
+SYM_CODE_END(xen_failsafe_callback)
 #endif /* CONFIG_XEN_PV */
 
 #ifdef CONFIG_XEN_PVHVM
@@ -1384,7 +1384,7 @@ SYM_CODE_END(error_exit)
  *	%r14: Used to save/restore the CR3 of the interrupted context
  *	      when PAGE_TABLE_ISOLATION is in use.  Do not clobber.
  */
-ENTRY(nmi)
+SYM_CODE_START(nmi)
 	UNWIND_HINT_IRET_REGS
 
 	/*
@@ -1719,21 +1719,21 @@ nmi_restore:
 	 * about espfix64 on the way back to kernel mode.
 	 */
 	iretq
-END(nmi)
+SYM_CODE_END(nmi)
 
 #ifndef CONFIG_IA32_EMULATION
 /*
  * This handles SYSCALL from 32-bit code.  There is no way to program
  * MSRs to fully disable 32-bit SYSCALL.
  */
-ENTRY(ignore_sysret)
+SYM_CODE_START(ignore_sysret)
 	UNWIND_HINT_EMPTY
 	mov	$-ENOSYS, %eax
 	sysret
-END(ignore_sysret)
+SYM_CODE_END(ignore_sysret)
 #endif
 
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
 	UNWIND_HINT_FUNC
 	/* Prevent any naive code from trying to unwind to our caller. */
 	xorl	%ebp, %ebp
@@ -1743,4 +1743,4 @@ ENTRY(rewind_stack_do_exit)
 	UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
 
 	call	do_exit
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
arch/x86/entry/entry_64_compat.S +4 -4
index 5c7e71669239..da296435676e 100644
@@ -196,7 +196,7 @@ ENDPROC(entry_SYSENTER_compat)
  * esp  user stack
  * 0(%esp) arg6
  */
-ENTRY(entry_SYSCALL_compat)
+SYM_CODE_START(entry_SYSCALL_compat)
 	/* Interrupts are off on entry. */
 	swapgs
 
@@ -311,7 +311,7 @@ sysret32_from_system_call:
 	xorl	%r10d, %r10d
 	swapgs
 	sysretl
-END(entry_SYSCALL_compat)
+SYM_CODE_END(entry_SYSCALL_compat)
 
 /*
  * 32-bit legacy system call entry.
@@ -339,7 +339,7 @@ END(entry_SYSCALL_compat)
  * edi  arg5
  * ebp  arg6
  */
-ENTRY(entry_INT80_compat)
+SYM_CODE_START(entry_INT80_compat)
 	/*
 	 * Interrupts are off on entry.
 	 */
@@ -416,4 +416,4 @@ ENTRY(entry_INT80_compat)
 	/* Go back to user mode. */
 	TRACE_IRQS_ON
 	jmp	swapgs_restore_regs_and_return_to_usermode
-END(entry_INT80_compat)
+SYM_CODE_END(entry_INT80_compat)
arch/x86/kernel/ftrace_64.S +2 -2
index 3afaaf555637..60f894b018e0 100644
@@ -296,7 +296,7 @@ ENTRY(ftrace_graph_caller)
 	retq
 ENDPROC(ftrace_graph_caller)
 
-ENTRY(return_to_handler)
+SYM_CODE_START(return_to_handler)
 	UNWIND_HINT_EMPTY
 	subq  $24, %rsp
 
@@ -312,5 +312,5 @@ ENTRY(return_to_handler)
 	movq (%rsp), %rax
 	addq $24, %rsp
 	JMP_NOSPEC %rdi
-END(return_to_handler)
+SYM_CODE_END(return_to_handler)
 #endif
arch/x86/kernel/head_64.S +6 -6
index 10f306e31244..4bbc770af632 100644
@@ -91,7 +91,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 	jmp 1f
 SYM_CODE_END(startup_64)
 
-ENTRY(secondary_startup_64)
+SYM_CODE_START(secondary_startup_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
@@ -241,7 +241,7 @@ ENTRY(secondary_startup_64)
 	pushq	%rax		# target address in negative space
 	lretq
 .Lafter_lret:
-END(secondary_startup_64)
+SYM_CODE_END(secondary_startup_64)
 
 #include "verify_cpu.S"
 
@@ -251,11 +251,11 @@ END(secondary_startup_64)
  * up already except stack. We just set up stack here. Then call
  * start_secondary() via .Ljump_to_C_code.
  */
-ENTRY(start_cpu0)
+SYM_CODE_START(start_cpu0)
 	UNWIND_HINT_EMPTY
 	movq	initial_stack(%rip), %rsp
 	jmp	.Ljump_to_C_code
-END(start_cpu0)
+SYM_CODE_END(start_cpu0)
 #endif
 
 	/* Both SMP bootup and ACPI suspend change these variables */
@@ -272,7 +272,7 @@ SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - SIZEOF_PTREGS)
 	__FINITDATA
 
 	__INIT
-ENTRY(early_idt_handler_array)
+SYM_CODE_START(early_idt_handler_array)
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
 	.if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
@@ -288,7 +288,7 @@ ENTRY(early_idt_handler_array)
 	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
 	UNWIND_HINT_IRET_REGS offset=16
-END(early_idt_handler_array)
+SYM_CODE_END(early_idt_handler_array)
 
 SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
arch/x86/xen/xen-asm_64.S +4 -4
index c209c70fc5e4..0060120f51dd 100644
@@ -20,11 +20,11 @@
 #include <linux/linkage.h>
 
 .macro xen_pv_trap name
-ENTRY(xen_\name)
+SYM_CODE_START(xen_\name)
 	pop %rcx
 	pop %r11
 	jmp  \name
-END(xen_\name)
+SYM_CODE_END(xen_\name)
 _ASM_NOKPROBE(xen_\name)
 .endm
 
@@ -57,7 +57,7 @@ xen_pv_trap entry_INT80_compat
 xen_pv_trap hypervisor_callback
 
 	__INIT
-ENTRY(xen_early_idt_handler_array)
+SYM_CODE_START(xen_early_idt_handler_array)
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
 	pop %rcx
@@ -66,7 +66,7 @@ ENTRY(xen_early_idt_handler_array)
 	i = i + 1
 	.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
-END(xen_early_idt_handler_array)
+SYM_CODE_END(xen_early_idt_handler_array)
 	__FINIT
 
 hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
arch/x86/xen/xen-head.S +4 -4
index c1d8b90aa4e2..1d0cee3163e4 100644
@@ -22,7 +22,7 @@
 
 #ifdef CONFIG_XEN_PV
 	__INIT
-ENTRY(startup_xen)
+SYM_CODE_START(startup_xen)
 	UNWIND_HINT_EMPTY
 	cld
 
@@ -52,13 +52,13 @@ ENTRY(startup_xen)
 #endif
 
 	jmp xen_start_kernel
-END(startup_xen)
+SYM_CODE_END(startup_xen)
 	__FINIT
 #endif
 
 .pushsection .text
 	.balign PAGE_SIZE
-ENTRY(hypercall_page)
+SYM_CODE_START(hypercall_page)
 	.rept (PAGE_SIZE / 32)
 		UNWIND_HINT_EMPTY
 		.skip 32
@@ -69,7 +69,7 @@ ENTRY(hypercall_page)
 	.type xen_hypercall_##n, @function; .size xen_hypercall_##n, 32
 #include <asm/xen-hypercalls.h>
 #undef HYPERCALL
-END(hypercall_page)
+SYM_CODE_END(hypercall_page)
 .popsection
 
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
Signature · 1 line
2.23.0
merge bot Applied
#67 lore raw

[tip: x86/asm] x86/asm/64: Change all ENTRY+END to SYM_CODE_*

The following commit has been merged into the x86/asm branch of tip:

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     bc7b11c04ee9c9b0451ebf85bf64e0de69fdbb17
Gitweb:        https://git.kernel.org/tip/bc7b11c04ee9c9b0451ebf85bf64e0de69fdbb17
Author:        Jiri Slaby <[email protected]>
AuthorDate:    Fri, 11 Oct 2019 13:51:03 +02:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Fri, 18 Oct 2019 11:58:26 +02:00

x86/asm/64: Change all ENTRY+END to SYM_CODE_*

Change all assembly code which is marked using END (and not ENDPROC). Switch all these to the appropriate new annotation SYM_CODE_START and SYM_CODE_END.

Cc Andy Lutomirski <[email protected]>
Cc Cao jin <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Kosina <[email protected]>
Cc Josh Poimboeuf <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Maran Wilson <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stefano Stabellini <[email protected]>
Cc "Steven Rostedt (VMware)" <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/entry/entry_64.S        | 52 +++++++++++++++----------------
 arch/x86/entry/entry_64_compat.S |  8 ++---
 arch/x86/kernel/ftrace_64.S      |  4 +-
 arch/x86/kernel/head_64.S        | 12 +++----
 arch/x86/xen/xen-asm_64.S        |  8 ++---
 arch/x86/xen/xen-head.S          |  8 ++---
 6 files changed, 46 insertions(+), 46 deletions(-)
arch/x86/entry/entry_64.S +26 -26
index 1568da6..13e4fe3 100644
@@ -46,11 +46,11 @@
 .section .entry.text, "ax"
 
 #ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
+SYM_CODE_START(native_usergs_sysret64)
 	UNWIND_HINT_EMPTY
 	swapgs
 	sysretq
-END(native_usergs_sysret64)
+SYM_CODE_END(native_usergs_sysret64)
 #endif /* CONFIG_PARAVIRT */
 
 .macro TRACE_IRQS_FLAGS flags:req
@@ -142,7 +142,7 @@ END(native_usergs_sysret64)
  * with them due to bugs in both AMD and Intel CPUs.
  */
 
-ENTRY(entry_SYSCALL_64)
+SYM_CODE_START(entry_SYSCALL_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * Interrupts are off on entry.
@@ -273,13 +273,13 @@ syscall_return_via_sysret:
 	popq	%rdi
 	popq	%rsp
 	USERGS_SYSRET64
-END(entry_SYSCALL_64)
+SYM_CODE_END(entry_SYSCALL_64)
 
 /*
  * %rdi: prev task
  * %rsi: next task
  */
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
 	UNWIND_HINT_FUNC
 	/*
 	 * Save callee-saved registers
@@ -321,7 +321,7 @@ ENTRY(__switch_to_asm)
 	popq	%rbp
 
 	jmp	__switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
 
 /*
  * A newly forked process directly context switches into this address.
@@ -330,7 +330,7 @@ END(__switch_to_asm)
  * rbx: kernel thread func (NULL for user thread)
  * r12: kernel thread arg
  */
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
 	UNWIND_HINT_EMPTY
 	movq	%rax, %rdi
 	call	schedule_tail			/* rdi: 'prev' task parameter */
@@ -357,14 +357,14 @@ ENTRY(ret_from_fork)
 	 */
 	movq	$0, RAX(%rsp)
 	jmp	2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
 
 /*
  * Build the entry stubs with some assembler magic.
  * We pack 1 stub into every 8-byte block.
  */
 	.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
     vector=FIRST_EXTERNAL_VECTOR
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
 	UNWIND_HINT_IRET_REGS
@@ -373,10 +373,10 @@ ENTRY(irq_entries_start)
 	.align	8
 	vector=vector+1
     .endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
 
 	.align 8
-ENTRY(spurious_entries_start)
+SYM_CODE_START(spurious_entries_start)
     vector=FIRST_SYSTEM_VECTOR
     .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
 	UNWIND_HINT_IRET_REGS
@@ -385,7 +385,7 @@ ENTRY(spurious_entries_start)
 	.align	8
 	vector=vector+1
     .endr
-END(spurious_entries_start)
+SYM_CODE_END(spurious_entries_start)
 
 .macro DEBUG_ENTRY_ASSERT_IRQS_OFF
 #ifdef CONFIG_DEBUG_ENTRY
@@ -511,7 +511,7 @@ END(spurious_entries_start)
  * | return address					|
  * +----------------------------------------------------+
  */
-ENTRY(interrupt_entry)
+SYM_CODE_START(interrupt_entry)
 	UNWIND_HINT_FUNC
 	ASM_CLAC
 	cld
@@ -579,7 +579,7 @@ ENTRY(interrupt_entry)
 	TRACE_IRQS_OFF
 
 	ret
-END(interrupt_entry)
+SYM_CODE_END(interrupt_entry)
 _ASM_NOKPROBE(interrupt_entry)
 
 
@@ -795,7 +795,7 @@ _ASM_NOKPROBE(common_interrupt)
  * APIC interrupts.
  */
 .macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
+SYM_CODE_START(\sym)
 	UNWIND_HINT_IRET_REGS
 	pushq	$~(\num)
 .Lcommon_\sym:
@@ -803,7 +803,7 @@ ENTRY(\sym)
 	UNWIND_HINT_REGS indirect=1
 	call	\do_sym	/* rdi points to pt_regs */
 	jmp	ret_from_intr
-END(\sym)
+SYM_CODE_END(\sym)
 _ASM_NOKPROBE(\sym)
 .endm
 
@@ -968,7 +968,7 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
  * #DF: if the thread stack is somehow unusable, we'll still get a useful OOPS.
  */
 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ist_offset=0 create_gap=0 read_cr2=0
-ENTRY(\sym)
+SYM_CODE_START(\sym)
 	UNWIND_HINT_IRET_REGS offset=\has_error_code*8
 
 	/* Sanity check */
@@ -1018,7 +1018,7 @@ ENTRY(\sym)
 	.endif
 
 _ASM_NOKPROBE(\sym)
-END(\sym)
+SYM_CODE_END(\sym)
 .endm
 
 idtentry divide_error			do_divide_error			has_error_code=0
@@ -1135,7 +1135,7 @@ SYM_CODE_END(xen_do_hypervisor_callback)
  * We distinguish between categories by comparing each saved segment register
  * with its current contents: any discrepancy means we in category 1.
  */
-ENTRY(xen_failsafe_callback)
+SYM_CODE_START(xen_failsafe_callback)
 	UNWIND_HINT_EMPTY
 	movl	%ds, %ecx
 	cmpw	%cx, 0x10(%rsp)
@@ -1165,7 +1165,7 @@ ENTRY(xen_failsafe_callback)
 	PUSH_AND_CLEAR_REGS
 	ENCODE_FRAME_POINTER
 	jmp	error_exit
-END(xen_failsafe_callback)
+SYM_CODE_END(xen_failsafe_callback)
 #endif /* CONFIG_XEN_PV */
 
 #ifdef CONFIG_XEN_PVHVM
@@ -1384,7 +1384,7 @@ SYM_CODE_END(error_exit)
  *	%r14: Used to save/restore the CR3 of the interrupted context
  *	      when PAGE_TABLE_ISOLATION is in use.  Do not clobber.
  */
-ENTRY(nmi)
+SYM_CODE_START(nmi)
 	UNWIND_HINT_IRET_REGS
 
 	/*
@@ -1719,21 +1719,21 @@ nmi_restore:
 	 * about espfix64 on the way back to kernel mode.
 	 */
 	iretq
-END(nmi)
+SYM_CODE_END(nmi)
 
 #ifndef CONFIG_IA32_EMULATION
 /*
  * This handles SYSCALL from 32-bit code.  There is no way to program
  * MSRs to fully disable 32-bit SYSCALL.
  */
-ENTRY(ignore_sysret)
+SYM_CODE_START(ignore_sysret)
 	UNWIND_HINT_EMPTY
 	mov	$-ENOSYS, %eax
 	sysret
-END(ignore_sysret)
+SYM_CODE_END(ignore_sysret)
 #endif
 
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
 	UNWIND_HINT_FUNC
 	/* Prevent any naive code from trying to unwind to our caller. */
 	xorl	%ebp, %ebp
@@ -1743,4 +1743,4 @@ ENTRY(rewind_stack_do_exit)
 	UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE
 
 	call	do_exit
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
arch/x86/entry/entry_64_compat.S +4 -4
index 5c7e716..da29643 100644
@@ -196,7 +196,7 @@ ENDPROC(entry_SYSENTER_compat)
  * esp  user stack
  * 0(%esp) arg6
  */
-ENTRY(entry_SYSCALL_compat)
+SYM_CODE_START(entry_SYSCALL_compat)
 	/* Interrupts are off on entry. */
 	swapgs
 
@@ -311,7 +311,7 @@ sysret32_from_system_call:
 	xorl	%r10d, %r10d
 	swapgs
 	sysretl
-END(entry_SYSCALL_compat)
+SYM_CODE_END(entry_SYSCALL_compat)
 
 /*
  * 32-bit legacy system call entry.
@@ -339,7 +339,7 @@ END(entry_SYSCALL_compat)
  * edi  arg5
  * ebp  arg6
  */
-ENTRY(entry_INT80_compat)
+SYM_CODE_START(entry_INT80_compat)
 	/*
 	 * Interrupts are off on entry.
 	 */
@@ -416,4 +416,4 @@ ENTRY(entry_INT80_compat)
 	/* Go back to user mode. */
 	TRACE_IRQS_ON
 	jmp	swapgs_restore_regs_and_return_to_usermode
-END(entry_INT80_compat)
+SYM_CODE_END(entry_INT80_compat)
arch/x86/kernel/ftrace_64.S +2 -2
index 3afaaf5..60f894b 100644
@@ -296,7 +296,7 @@ ENTRY(ftrace_graph_caller)
 	retq
 ENDPROC(ftrace_graph_caller)
 
-ENTRY(return_to_handler)
+SYM_CODE_START(return_to_handler)
 	UNWIND_HINT_EMPTY
 	subq  $24, %rsp
 
@@ -312,5 +312,5 @@ ENTRY(return_to_handler)
 	movq (%rsp), %rax
 	addq $24, %rsp
 	JMP_NOSPEC %rdi
-END(return_to_handler)
+SYM_CODE_END(return_to_handler)
 #endif
arch/x86/kernel/head_64.S +6 -6
index 10f306e..4bbc770 100644
@@ -91,7 +91,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 	jmp 1f
 SYM_CODE_END(startup_64)
 
-ENTRY(secondary_startup_64)
+SYM_CODE_START(secondary_startup_64)
 	UNWIND_HINT_EMPTY
 	/*
 	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
@@ -241,7 +241,7 @@ ENTRY(secondary_startup_64)
 	pushq	%rax		# target address in negative space
 	lretq
 .Lafter_lret:
-END(secondary_startup_64)
+SYM_CODE_END(secondary_startup_64)
 
 #include "verify_cpu.S"
 
@@ -251,11 +251,11 @@ END(secondary_startup_64)
  * up already except stack. We just set up stack here. Then call
  * start_secondary() via .Ljump_to_C_code.
  */
-ENTRY(start_cpu0)
+SYM_CODE_START(start_cpu0)
 	UNWIND_HINT_EMPTY
 	movq	initial_stack(%rip), %rsp
 	jmp	.Ljump_to_C_code
-END(start_cpu0)
+SYM_CODE_END(start_cpu0)
 #endif
 
 	/* Both SMP bootup and ACPI suspend change these variables */
@@ -272,7 +272,7 @@ SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - SIZEOF_PTREGS)
 	__FINITDATA
 
 	__INIT
-ENTRY(early_idt_handler_array)
+SYM_CODE_START(early_idt_handler_array)
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
 	.if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
@@ -288,7 +288,7 @@ ENTRY(early_idt_handler_array)
 	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
 	UNWIND_HINT_IRET_REGS offset=16
-END(early_idt_handler_array)
+SYM_CODE_END(early_idt_handler_array)
 
 SYM_CODE_START_LOCAL(early_idt_handler_common)
 	/*
arch/x86/xen/xen-asm_64.S +4 -4
index c209c70..0060120 100644
@@ -20,11 +20,11 @@
 #include <linux/linkage.h>
 
 .macro xen_pv_trap name
-ENTRY(xen_\name)
+SYM_CODE_START(xen_\name)
 	pop %rcx
 	pop %r11
 	jmp  \name
-END(xen_\name)
+SYM_CODE_END(xen_\name)
 _ASM_NOKPROBE(xen_\name)
 .endm
 
@@ -57,7 +57,7 @@ xen_pv_trap entry_INT80_compat
 xen_pv_trap hypervisor_callback
 
 	__INIT
-ENTRY(xen_early_idt_handler_array)
+SYM_CODE_START(xen_early_idt_handler_array)
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
 	pop %rcx
@@ -66,7 +66,7 @@ ENTRY(xen_early_idt_handler_array)
 	i = i + 1
 	.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
-END(xen_early_idt_handler_array)
+SYM_CODE_END(xen_early_idt_handler_array)
 	__FINIT
 
 hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
arch/x86/xen/xen-head.S +4 -4
index c1d8b90..1d0cee3 100644
@@ -22,7 +22,7 @@
 
 #ifdef CONFIG_XEN_PV
 	__INIT
-ENTRY(startup_xen)
+SYM_CODE_START(startup_xen)
 	UNWIND_HINT_EMPTY
 	cld
 
@@ -52,13 +52,13 @@ ENTRY(startup_xen)
 #endif
 
 	jmp xen_start_kernel
-END(startup_xen)
+SYM_CODE_END(startup_xen)
 	__FINIT
 #endif
 
 .pushsection .text
 	.balign PAGE_SIZE
-ENTRY(hypercall_page)
+SYM_CODE_START(hypercall_page)
 	.rept (PAGE_SIZE / 32)
 		UNWIND_HINT_EMPTY
 		.skip 32
@@ -69,7 +69,7 @@ ENTRY(hypercall_page)
 	.type xen_hypercall_##n, @function; .size xen_hypercall_##n, 32
 #include <asm/xen-hypercalls.h>
 #undef HYPERCALL
-END(hypercall_page)
+SYM_CODE_END(hypercall_page)
 .popsection
 
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
author
#68 lore raw

PATCH v9 24/28 x86_64/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

In reply to Jiri Slaby

These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START. And their ENDPROC's by SYM_FUNC_END.

And make sure ENTRY/ENDPROC is not defined on X86_64, given these were the last users.

Cc "H. Peter Anvin" <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Len Brown <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Matt Fleming <[email protected]>
Cc Ard Biesheuvel <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Juergen Gross <[email protected]>
---
 arch/x86/boot/compressed/efi_thunk_64.S      |  4 +-
 arch/x86/boot/compressed/head_64.S           | 16 +++---
 arch/x86/boot/compressed/mem_encrypt.S       |  8 +--
 arch/x86/crypto/aegis128-aesni-asm.S         | 28 ++++-----
 arch/x86/crypto/aes_ctrby8_avx-x86_64.S      | 12 ++--
 arch/x86/crypto/aesni-intel_asm.S            | 60 ++++++++++----------
 arch/x86/crypto/aesni-intel_avx-x86_64.S     | 32 +++++------
 arch/x86/crypto/blowfish-x86_64-asm_64.S     | 16 +++---
 arch/x86/crypto/camellia-aesni-avx-asm_64.S  | 24 ++++----
 arch/x86/crypto/camellia-aesni-avx2-asm_64.S | 24 ++++----
 arch/x86/crypto/camellia-x86_64-asm_64.S     | 16 +++---
 arch/x86/crypto/cast5-avx-x86_64-asm_64.S    | 16 +++---
 arch/x86/crypto/cast6-avx-x86_64-asm_64.S    | 24 ++++----
 arch/x86/crypto/chacha-avx2-x86_64.S         | 12 ++--
 arch/x86/crypto/chacha-avx512vl-x86_64.S     | 12 ++--
 arch/x86/crypto/chacha-ssse3-x86_64.S        | 12 ++--
 arch/x86/crypto/crc32-pclmul_asm.S           |  4 +-
 arch/x86/crypto/crc32c-pcl-intel-asm_64.S    |  4 +-
 arch/x86/crypto/crct10dif-pcl-asm_64.S       |  4 +-
 arch/x86/crypto/des3_ede-asm_64.S            |  8 +--
 arch/x86/crypto/ghash-clmulni-intel_asm.S    |  8 +--
 arch/x86/crypto/nh-avx2-x86_64.S             |  4 +-
 arch/x86/crypto/nh-sse2-x86_64.S             |  4 +-
 arch/x86/crypto/poly1305-avx2-x86_64.S       |  4 +-
 arch/x86/crypto/poly1305-sse2-x86_64.S       |  8 +--
 arch/x86/crypto/serpent-avx-x86_64-asm_64.S  | 24 ++++----
 arch/x86/crypto/serpent-avx2-asm_64.S        | 24 ++++----
 arch/x86/crypto/serpent-sse2-x86_64-asm_64.S |  8 +--
 arch/x86/crypto/sha1_avx2_x86_64_asm.S       |  4 +-
 arch/x86/crypto/sha1_ni_asm.S                |  4 +-
 arch/x86/crypto/sha1_ssse3_asm.S             |  4 +-
 arch/x86/crypto/sha256-avx-asm.S             |  4 +-
 arch/x86/crypto/sha256-avx2-asm.S            |  4 +-
 arch/x86/crypto/sha256-ssse3-asm.S           |  4 +-
 arch/x86/crypto/sha256_ni_asm.S              |  4 +-
 arch/x86/crypto/sha512-avx-asm.S             |  4 +-
 arch/x86/crypto/sha512-avx2-asm.S            |  4 +-
 arch/x86/crypto/sha512-ssse3-asm.S           |  4 +-
 arch/x86/crypto/twofish-avx-x86_64-asm_64.S  | 24 ++++----
 arch/x86/crypto/twofish-x86_64-asm_64-3way.S |  8 +--
 arch/x86/crypto/twofish-x86_64-asm_64.S      |  8 +--
 arch/x86/entry/entry_64.S                    | 10 ++--
 arch/x86/entry/entry_64_compat.S             |  4 +-
 arch/x86/kernel/acpi/wakeup_64.S             |  8 +--
 arch/x86/kernel/ftrace_64.S                  | 20 +++----
 arch/x86/kernel/irqflags.S                   |  8 +--
 arch/x86/kvm/vmx/vmenter.S                   | 12 ++--
 arch/x86/lib/checksum_32.S                   |  8 +--
 arch/x86/lib/clear_page_64.S                 | 12 ++--
 arch/x86/lib/cmpxchg16b_emu.S                |  4 +-
 arch/x86/lib/cmpxchg8b_emu.S                 |  4 +-
 arch/x86/lib/copy_page_64.S                  |  4 +-
 arch/x86/lib/copy_user_64.S                  | 16 +++---
 arch/x86/lib/csum-copy_64.S                  |  4 +-
 arch/x86/lib/getuser.S                       | 16 +++---
 arch/x86/lib/hweight.S                       |  8 +--
 arch/x86/lib/iomap_copy_64.S                 |  4 +-
 arch/x86/lib/memcpy_64.S                     |  4 +-
 arch/x86/lib/memmove_64.S                    |  4 +-
 arch/x86/lib/memset_64.S                     |  4 +-
 arch/x86/lib/msr-reg.S                       |  8 +--
 arch/x86/lib/putuser.S                       | 16 +++---
 arch/x86/lib/retpoline.S                     |  4 +-
 arch/x86/mm/mem_encrypt_boot.S               |  8 +--
 arch/x86/platform/efi/efi_stub_64.S          |  4 +-
 arch/x86/platform/efi/efi_thunk_64.S         |  4 +-
 arch/x86/power/hibernate_asm_64.S            |  8 +--
 arch/x86/xen/xen-asm.S                       | 28 ++++-----
 arch/x86/xen/xen-asm_64.S                    | 16 +++---
 include/linux/linkage.h                      |  4 ++
 70 files changed, 379 insertions(+), 375 deletions(-)
arch/x86/boot/compressed/efi_thunk_64.S +2 -2
index 31312070db22..593913692d16 100644
@@ -23,7 +23,7 @@
 
 	.code64
 	.text
-ENTRY(efi64_thunk)
+SYM_FUNC_START(efi64_thunk)
 	push	%rbp
 	push	%rbx
 
@@ -97,7 +97,7 @@ ENTRY(efi64_thunk)
 	pop	%rbx
 	pop	%rbp
 	ret
-ENDPROC(efi64_thunk)
+SYM_FUNC_END(efi64_thunk)
 
 SYM_FUNC_START_LOCAL(efi_exit32)
 	movq	func_rt_ptr(%rip), %rax
arch/x86/boot/compressed/head_64.S +8 -8
index 55800467ce5c..58a512e33d8d 100644
@@ -45,7 +45,7 @@
 
 	__HEAD
 	.code32
-ENTRY(startup_32)
+SYM_FUNC_START(startup_32)
 	/*
 	 * 32bit entry is 0 and it is ABI so immutable!
 	 * If we come here directly from a bootloader,
@@ -222,11 +222,11 @@ ENTRY(startup_32)
 
 	/* Jump from 32bit compatibility mode into 64bit mode. */
 	lret
-ENDPROC(startup_32)
+SYM_FUNC_END(startup_32)
 
 #ifdef CONFIG_EFI_MIXED
 	.org 0x190
-ENTRY(efi32_stub_entry)
+SYM_FUNC_START(efi32_stub_entry)
 	add	$0x4, %esp		/* Discard return address */
 	popl	%ecx
 	popl	%edx
@@ -245,7 +245,7 @@ ENTRY(efi32_stub_entry)
 	movl	%eax, efi_config(%ebp)
 
 	jmp	startup_32
-ENDPROC(efi32_stub_entry)
+SYM_FUNC_END(efi32_stub_entry)
 #endif
 
 	.code64
@@ -447,7 +447,7 @@ SYM_CODE_END(startup_64)
 #ifdef CONFIG_EFI_STUB
 
 /* The entry point for the PE/COFF executable is efi_pe_entry. */
-ENTRY(efi_pe_entry)
+SYM_FUNC_START(efi_pe_entry)
 	movq	%rcx, efi64_config(%rip)	/* Handle */
 	movq	%rdx, efi64_config+8(%rip) /* EFI System table pointer */
 
@@ -496,10 +496,10 @@ fail:
 	movl	BP_code32_start(%esi), %eax
 	leaq	startup_64(%rax), %rax
 	jmp	*%rax
-ENDPROC(efi_pe_entry)
+SYM_FUNC_END(efi_pe_entry)
 
 	.org 0x390
-ENTRY(efi64_stub_entry)
+SYM_FUNC_START(efi64_stub_entry)
 	movq	%rdi, efi64_config(%rip)	/* Handle */
 	movq	%rsi, efi64_config+8(%rip) /* EFI System table pointer */
 
@@ -508,7 +508,7 @@ ENTRY(efi64_stub_entry)
 
 	movq	%rdx, %rsi
 	jmp	handover_entry
-ENDPROC(efi64_stub_entry)
+SYM_FUNC_END(efi64_stub_entry)
 #endif
 
 	.text
arch/x86/boot/compressed/mem_encrypt.S +4 -4
index 28d703cad310..dd07e7b41b11 100644
@@ -15,7 +15,7 @@
 
 	.text
 	.code32
-ENTRY(get_sev_encryption_bit)
+SYM_FUNC_START(get_sev_encryption_bit)
 	xor	%eax, %eax
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
@@ -65,10 +65,10 @@ ENTRY(get_sev_encryption_bit)
 #endif	/* CONFIG_AMD_MEM_ENCRYPT */
 
 	ret
-ENDPROC(get_sev_encryption_bit)
+SYM_FUNC_END(get_sev_encryption_bit)
 
 	.code64
-ENTRY(set_sev_encryption_mask)
+SYM_FUNC_START(set_sev_encryption_mask)
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	push	%rbp
 	push	%rdx
@@ -90,7 +90,7 @@ ENTRY(set_sev_encryption_mask)
 
 	xor	%rax, %rax
 	ret
-ENDPROC(set_sev_encryption_mask)
+SYM_FUNC_END(set_sev_encryption_mask)
 
 	.data
 
arch/x86/crypto/aegis128-aesni-asm.S +14 -14
index b7026fdef4ff..51d46d93efbc 100644
@@ -186,7 +186,7 @@ SYM_FUNC_END(__store_partial)
 /*
  * void crypto_aegis128_aesni_init(void *state, const void *key, const void *iv);
  */
-ENTRY(crypto_aegis128_aesni_init)
+SYM_FUNC_START(crypto_aegis128_aesni_init)
 	FRAME_BEGIN
 
 	/* load IV: */
@@ -226,13 +226,13 @@ ENTRY(crypto_aegis128_aesni_init)
 
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_init)
+SYM_FUNC_END(crypto_aegis128_aesni_init)
 
 /*
  * void crypto_aegis128_aesni_ad(void *state, unsigned int length,
  *                               const void *data);
  */
-ENTRY(crypto_aegis128_aesni_ad)
+SYM_FUNC_START(crypto_aegis128_aesni_ad)
 	FRAME_BEGIN
 
 	cmp $0x10, LEN
@@ -378,7 +378,7 @@ ENTRY(crypto_aegis128_aesni_ad)
 .Lad_out:
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_ad)
+SYM_FUNC_END(crypto_aegis128_aesni_ad)
 
 .macro encrypt_block a s0 s1 s2 s3 s4 i
 	movdq\a (\i * 0x10)(SRC), MSG
@@ -402,7 +402,7 @@ ENDPROC(crypto_aegis128_aesni_ad)
  * void crypto_aegis128_aesni_enc(void *state, unsigned int length,
  *                                const void *src, void *dst);
  */
-ENTRY(crypto_aegis128_aesni_enc)
+SYM_FUNC_START(crypto_aegis128_aesni_enc)
 	FRAME_BEGIN
 
 	cmp $0x10, LEN
@@ -493,13 +493,13 @@ ENTRY(crypto_aegis128_aesni_enc)
 .Lenc_out:
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_enc)
+SYM_FUNC_END(crypto_aegis128_aesni_enc)
 
 /*
  * void crypto_aegis128_aesni_enc_tail(void *state, unsigned int length,
  *                                     const void *src, void *dst);
  */
-ENTRY(crypto_aegis128_aesni_enc_tail)
+SYM_FUNC_START(crypto_aegis128_aesni_enc_tail)
 	FRAME_BEGIN
 
 	/* load the state: */
@@ -533,7 +533,7 @@ ENTRY(crypto_aegis128_aesni_enc_tail)
 
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_enc_tail)
+SYM_FUNC_END(crypto_aegis128_aesni_enc_tail)
 
 .macro decrypt_block a s0 s1 s2 s3 s4 i
 	movdq\a (\i * 0x10)(SRC), MSG
@@ -556,7 +556,7 @@ ENDPROC(crypto_aegis128_aesni_enc_tail)
  * void crypto_aegis128_aesni_dec(void *state, unsigned int length,
  *                                const void *src, void *dst);
  */
-ENTRY(crypto_aegis128_aesni_dec)
+SYM_FUNC_START(crypto_aegis128_aesni_dec)
 	FRAME_BEGIN
 
 	cmp $0x10, LEN
@@ -647,13 +647,13 @@ ENTRY(crypto_aegis128_aesni_dec)
 .Ldec_out:
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_dec)
+SYM_FUNC_END(crypto_aegis128_aesni_dec)
 
 /*
  * void crypto_aegis128_aesni_dec_tail(void *state, unsigned int length,
  *                                     const void *src, void *dst);
  */
-ENTRY(crypto_aegis128_aesni_dec_tail)
+SYM_FUNC_START(crypto_aegis128_aesni_dec_tail)
 	FRAME_BEGIN
 
 	/* load the state: */
@@ -697,13 +697,13 @@ ENTRY(crypto_aegis128_aesni_dec_tail)
 
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_dec_tail)
+SYM_FUNC_END(crypto_aegis128_aesni_dec_tail)
 
 /*
  * void crypto_aegis128_aesni_final(void *state, void *tag_xor,
  *                                  u64 assoclen, u64 cryptlen);
  */
-ENTRY(crypto_aegis128_aesni_final)
+SYM_FUNC_START(crypto_aegis128_aesni_final)
 	FRAME_BEGIN
 
 	/* load the state: */
@@ -744,4 +744,4 @@ ENTRY(crypto_aegis128_aesni_final)
 
 	FRAME_END
 	ret
-ENDPROC(crypto_aegis128_aesni_final)
+SYM_FUNC_END(crypto_aegis128_aesni_final)
arch/x86/crypto/aes_ctrby8_avx-x86_64.S +6 -6
index 5f6a5af9c489..ec437db1fa54 100644
@@ -544,11 +544,11 @@ ddq_add_8:
  * aes_ctr_enc_128_avx_by8(void *in, void *iv, void *keys, void *out,
  *			unsigned int num_bytes)
  */
-ENTRY(aes_ctr_enc_128_avx_by8)
+SYM_FUNC_START(aes_ctr_enc_128_avx_by8)
 	/* call the aes main loop */
 	do_aes_ctrmain KEY_128
 
-ENDPROC(aes_ctr_enc_128_avx_by8)
+SYM_FUNC_END(aes_ctr_enc_128_avx_by8)
 
 /*
  * routine to do AES192 CTR enc/decrypt "by8"
@@ -557,11 +557,11 @@ ENDPROC(aes_ctr_enc_128_avx_by8)
  * aes_ctr_enc_192_avx_by8(void *in, void *iv, void *keys, void *out,
  *			unsigned int num_bytes)
  */
-ENTRY(aes_ctr_enc_192_avx_by8)
+SYM_FUNC_START(aes_ctr_enc_192_avx_by8)
 	/* call the aes main loop */
 	do_aes_ctrmain KEY_192
 
-ENDPROC(aes_ctr_enc_192_avx_by8)
+SYM_FUNC_END(aes_ctr_enc_192_avx_by8)
 
 /*
  * routine to do AES256 CTR enc/decrypt "by8"
@@ -570,8 +570,8 @@ ENDPROC(aes_ctr_enc_192_avx_by8)
  * aes_ctr_enc_256_avx_by8(void *in, void *iv, void *keys, void *out,
  *			unsigned int num_bytes)
  */
-ENTRY(aes_ctr_enc_256_avx_by8)
+SYM_FUNC_START(aes_ctr_enc_256_avx_by8)
 	/* call the aes main loop */
 	do_aes_ctrmain KEY_256
 
-ENDPROC(aes_ctr_enc_256_avx_by8)
+SYM_FUNC_END(aes_ctr_enc_256_avx_by8)
arch/x86/crypto/aesni-intel_asm.S +30 -30

226 lines not on this page · raw message

arch/x86/crypto/aesni-intel_avx-x86_64.S +16 -16
index 91c039ab5699..bfa1c0b3e5b4 100644
@@ -1775,12 +1775,12 @@ _initial_blocks_done\@:
 #        const   u8 *aad, /* Additional Authentication Data (AAD)*/
 #        u64     aad_len) /* Length of AAD in bytes. With RFC4106 this is going to be 8 or 12 Bytes */
 #############################################################
-ENTRY(aesni_gcm_init_avx_gen2)
+SYM_FUNC_START(aesni_gcm_init_avx_gen2)
         FUNC_SAVE
         INIT GHASH_MUL_AVX, PRECOMPUTE_AVX
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_init_avx_gen2)
+SYM_FUNC_END(aesni_gcm_init_avx_gen2)
 
 ###############################################################################
 #void   aesni_gcm_enc_update_avx_gen2(
@@ -1790,7 +1790,7 @@ ENDPROC(aesni_gcm_init_avx_gen2)
 #        const   u8 *in, /* Plaintext input */
 #        u64     plaintext_len) /* Length of data in Bytes for encryption. */
 ###############################################################################
-ENTRY(aesni_gcm_enc_update_avx_gen2)
+SYM_FUNC_START(aesni_gcm_enc_update_avx_gen2)
         FUNC_SAVE
         mov     keysize, %eax
         cmp     $32, %eax
@@ -1809,7 +1809,7 @@ key_256_enc_update:
         GCM_ENC_DEC INITIAL_BLOCKS_AVX, GHASH_8_ENCRYPT_8_PARALLEL_AVX, GHASH_LAST_8_AVX, GHASH_MUL_AVX, ENC, 13
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_enc_update_avx_gen2)
+SYM_FUNC_END(aesni_gcm_enc_update_avx_gen2)
 
 ###############################################################################
 #void   aesni_gcm_dec_update_avx_gen2(
@@ -1819,7 +1819,7 @@ ENDPROC(aesni_gcm_enc_update_avx_gen2)
 #        const   u8 *in, /* Ciphertext input */
 #        u64     plaintext_len) /* Length of data in Bytes for encryption. */
 ###############################################################################
-ENTRY(aesni_gcm_dec_update_avx_gen2)
+SYM_FUNC_START(aesni_gcm_dec_update_avx_gen2)
         FUNC_SAVE
         mov     keysize,%eax
         cmp     $32, %eax
@@ -1838,7 +1838,7 @@ key_256_dec_update:
         GCM_ENC_DEC INITIAL_BLOCKS_AVX, GHASH_8_ENCRYPT_8_PARALLEL_AVX, GHASH_LAST_8_AVX, GHASH_MUL_AVX, DEC, 13
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_dec_update_avx_gen2)
+SYM_FUNC_END(aesni_gcm_dec_update_avx_gen2)
 
 ###############################################################################
 #void   aesni_gcm_finalize_avx_gen2(
@@ -1848,7 +1848,7 @@ ENDPROC(aesni_gcm_dec_update_avx_gen2)
 #        u64     auth_tag_len)# /* Authenticated Tag Length in bytes.
 #				Valid values are 16 (most likely), 12 or 8. */
 ###############################################################################
-ENTRY(aesni_gcm_finalize_avx_gen2)
+SYM_FUNC_START(aesni_gcm_finalize_avx_gen2)
         FUNC_SAVE
         mov	keysize,%eax
         cmp     $32, %eax
@@ -1867,7 +1867,7 @@ key_256_finalize:
         GCM_COMPLETE GHASH_MUL_AVX, 13, arg3, arg4
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_finalize_avx_gen2)
+SYM_FUNC_END(aesni_gcm_finalize_avx_gen2)
 
 #endif /* CONFIG_AS_AVX */
 
@@ -2746,12 +2746,12 @@ _initial_blocks_done\@:
 #        const   u8 *aad, /* Additional Authentication Data (AAD)*/
 #        u64     aad_len) /* Length of AAD in bytes. With RFC4106 this is going to be 8 or 12 Bytes */
 #############################################################
-ENTRY(aesni_gcm_init_avx_gen4)
+SYM_FUNC_START(aesni_gcm_init_avx_gen4)
         FUNC_SAVE
         INIT GHASH_MUL_AVX2, PRECOMPUTE_AVX2
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_init_avx_gen4)
+SYM_FUNC_END(aesni_gcm_init_avx_gen4)
 
 ###############################################################################
 #void   aesni_gcm_enc_avx_gen4(
@@ -2761,7 +2761,7 @@ ENDPROC(aesni_gcm_init_avx_gen4)
 #        const   u8 *in, /* Plaintext input */
 #        u64     plaintext_len) /* Length of data in Bytes for encryption. */
 ###############################################################################
-ENTRY(aesni_gcm_enc_update_avx_gen4)
+SYM_FUNC_START(aesni_gcm_enc_update_avx_gen4)
         FUNC_SAVE
         mov     keysize,%eax
         cmp     $32, %eax
@@ -2780,7 +2780,7 @@ key_256_enc_update4:
         GCM_ENC_DEC INITIAL_BLOCKS_AVX2, GHASH_8_ENCRYPT_8_PARALLEL_AVX2, GHASH_LAST_8_AVX2, GHASH_MUL_AVX2, ENC, 13
         FUNC_RESTORE
 	ret
-ENDPROC(aesni_gcm_enc_update_avx_gen4)
+SYM_FUNC_END(aesni_gcm_enc_update_avx_gen4)
 
 ###############################################################################
 #void   aesni_gcm_dec_update_avx_gen4(
@@ -2790,7 +2790,7 @@ ENDPROC(aesni_gcm_enc_update_avx_gen4)
 #        const   u8 *in, /* Ciphertext input */
 #        u64     plaintext_len) /* Length of data in Bytes for encryption. */
 ###############################################################################
-ENTRY(aesni_gcm_dec_update_avx_gen4)
+SYM_FUNC_START(aesni_gcm_dec_update_avx_gen4)
         FUNC_SAVE
         mov     keysize,%eax
         cmp     $32, %eax
@@ -2809,7 +2809,7 @@ key_256_dec_update4:
         GCM_ENC_DEC INITIAL_BLOCKS_AVX2, GHASH_8_ENCRYPT_8_PARALLEL_AVX2, GHASH_LAST_8_AVX2, GHASH_MUL_AVX2, DEC, 13
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_dec_update_avx_gen4)
+SYM_FUNC_END(aesni_gcm_dec_update_avx_gen4)
 
 ###############################################################################
 #void   aesni_gcm_finalize_avx_gen4(
@@ -2819,7 +2819,7 @@ ENDPROC(aesni_gcm_dec_update_avx_gen4)
 #        u64     auth_tag_len)# /* Authenticated Tag Length in bytes.
 #                              Valid values are 16 (most likely), 12 or 8. */
 ###############################################################################
-ENTRY(aesni_gcm_finalize_avx_gen4)
+SYM_FUNC_START(aesni_gcm_finalize_avx_gen4)
         FUNC_SAVE
         mov	keysize,%eax
         cmp     $32, %eax
@@ -2838,6 +2838,6 @@ key_256_finalize4:
         GCM_COMPLETE GHASH_MUL_AVX2, 13, arg3, arg4
         FUNC_RESTORE
         ret
-ENDPROC(aesni_gcm_finalize_avx_gen4)
+SYM_FUNC_END(aesni_gcm_finalize_avx_gen4)
 
 #endif /* CONFIG_AS_AVX2 */
arch/x86/crypto/blowfish-x86_64-asm_64.S +8 -8
index 330db7a48af8..4222ac6d6584 100644
@@ -103,7 +103,7 @@
 	bswapq 			RX0; \
 	xorq RX0, 		(RIO);
 
-ENTRY(__blowfish_enc_blk)
+SYM_FUNC_START(__blowfish_enc_blk)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -139,9 +139,9 @@ ENTRY(__blowfish_enc_blk)
 .L__enc_xor:
 	xor_block();
 	ret;
-ENDPROC(__blowfish_enc_blk)
+SYM_FUNC_END(__blowfish_enc_blk)
 
-ENTRY(blowfish_dec_blk)
+SYM_FUNC_START(blowfish_dec_blk)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -171,7 +171,7 @@ ENTRY(blowfish_dec_blk)
 	movq %r11, %r12;
 
 	ret;
-ENDPROC(blowfish_dec_blk)
+SYM_FUNC_END(blowfish_dec_blk)
 
 /**********************************************************************
   4-way blowfish, four blocks parallel
@@ -283,7 +283,7 @@ ENDPROC(blowfish_dec_blk)
 	bswapq 			RX3; \
 	xorq RX3,		24(RIO);
 
-ENTRY(__blowfish_enc_blk_4way)
+SYM_FUNC_START(__blowfish_enc_blk_4way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -330,9 +330,9 @@ ENTRY(__blowfish_enc_blk_4way)
 	popq %rbx;
 	popq %r12;
 	ret;
-ENDPROC(__blowfish_enc_blk_4way)
+SYM_FUNC_END(__blowfish_enc_blk_4way)
 
-ENTRY(blowfish_dec_blk_4way)
+SYM_FUNC_START(blowfish_dec_blk_4way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -365,4 +365,4 @@ ENTRY(blowfish_dec_blk_4way)
 	popq %r12;
 
 	ret;
-ENDPROC(blowfish_dec_blk_4way)
+SYM_FUNC_END(blowfish_dec_blk_4way)
arch/x86/crypto/camellia-aesni-avx-asm_64.S +12 -12
index f4408ca55fdb..d01ddd73de65 100644
@@ -893,7 +893,7 @@ SYM_FUNC_START_LOCAL(__camellia_dec_blk16)
 	jmp .Ldec_max24;
 SYM_FUNC_END(__camellia_dec_blk16)
 
-ENTRY(camellia_ecb_enc_16way)
+SYM_FUNC_START(camellia_ecb_enc_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -916,9 +916,9 @@ ENTRY(camellia_ecb_enc_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_ecb_enc_16way)
+SYM_FUNC_END(camellia_ecb_enc_16way)
 
-ENTRY(camellia_ecb_dec_16way)
+SYM_FUNC_START(camellia_ecb_dec_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -946,9 +946,9 @@ ENTRY(camellia_ecb_dec_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_ecb_dec_16way)
+SYM_FUNC_END(camellia_ecb_dec_16way)
 
-ENTRY(camellia_cbc_dec_16way)
+SYM_FUNC_START(camellia_cbc_dec_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -997,7 +997,7 @@ ENTRY(camellia_cbc_dec_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_cbc_dec_16way)
+SYM_FUNC_END(camellia_cbc_dec_16way)
 
 #define inc_le128(x, minus_one, tmp) \
 	vpcmpeqq minus_one, x, tmp; \
@@ -1005,7 +1005,7 @@ ENDPROC(camellia_cbc_dec_16way)
 	vpslldq $8, tmp, tmp; \
 	vpsubq tmp, x, x;
 
-ENTRY(camellia_ctr_16way)
+SYM_FUNC_START(camellia_ctr_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -1110,7 +1110,7 @@ ENTRY(camellia_ctr_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_ctr_16way)
+SYM_FUNC_END(camellia_ctr_16way)
 
 #define gf128mul_x_ble(iv, mask, tmp) \
 	vpsrad $31, iv, tmp; \
@@ -1256,7 +1256,7 @@ SYM_FUNC_START_LOCAL(camellia_xts_crypt_16way)
 	ret;
 SYM_FUNC_END(camellia_xts_crypt_16way)
 
-ENTRY(camellia_xts_enc_16way)
+SYM_FUNC_START(camellia_xts_enc_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -1268,9 +1268,9 @@ ENTRY(camellia_xts_enc_16way)
 	leaq __camellia_enc_blk16, %r9;
 
 	jmp camellia_xts_crypt_16way;
-ENDPROC(camellia_xts_enc_16way)
+SYM_FUNC_END(camellia_xts_enc_16way)
 
-ENTRY(camellia_xts_dec_16way)
+SYM_FUNC_START(camellia_xts_dec_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -1286,4 +1286,4 @@ ENTRY(camellia_xts_dec_16way)
 	leaq __camellia_dec_blk16, %r9;
 
 	jmp camellia_xts_crypt_16way;
-ENDPROC(camellia_xts_dec_16way)
+SYM_FUNC_END(camellia_xts_dec_16way)
arch/x86/crypto/camellia-aesni-avx2-asm_64.S +12 -12
index 72ae3edd0997..563ef6e83cdd 100644
@@ -931,7 +931,7 @@ SYM_FUNC_START_LOCAL(__camellia_dec_blk32)
 	jmp .Ldec_max24;
 SYM_FUNC_END(__camellia_dec_blk32)
 
-ENTRY(camellia_ecb_enc_32way)
+SYM_FUNC_START(camellia_ecb_enc_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -958,9 +958,9 @@ ENTRY(camellia_ecb_enc_32way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_ecb_enc_32way)
+SYM_FUNC_END(camellia_ecb_enc_32way)
 
-ENTRY(camellia_ecb_dec_32way)
+SYM_FUNC_START(camellia_ecb_dec_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -992,9 +992,9 @@ ENTRY(camellia_ecb_dec_32way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_ecb_dec_32way)
+SYM_FUNC_END(camellia_ecb_dec_32way)
 
-ENTRY(camellia_cbc_dec_32way)
+SYM_FUNC_START(camellia_cbc_dec_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -1060,7 +1060,7 @@ ENTRY(camellia_cbc_dec_32way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_cbc_dec_32way)
+SYM_FUNC_END(camellia_cbc_dec_32way)
 
 #define inc_le128(x, minus_one, tmp) \
 	vpcmpeqq minus_one, x, tmp; \
@@ -1076,7 +1076,7 @@ ENDPROC(camellia_cbc_dec_32way)
 	vpslldq $8, tmp1, tmp1; \
 	vpsubq tmp1, x, x;
 
-ENTRY(camellia_ctr_32way)
+SYM_FUNC_START(camellia_ctr_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -1200,7 +1200,7 @@ ENTRY(camellia_ctr_32way)
 
 	FRAME_END
 	ret;
-ENDPROC(camellia_ctr_32way)
+SYM_FUNC_END(camellia_ctr_32way)
 
 #define gf128mul_x_ble(iv, mask, tmp) \
 	vpsrad $31, iv, tmp; \
@@ -1369,7 +1369,7 @@ SYM_FUNC_START_LOCAL(camellia_xts_crypt_32way)
 	ret;
 SYM_FUNC_END(camellia_xts_crypt_32way)
 
-ENTRY(camellia_xts_enc_32way)
+SYM_FUNC_START(camellia_xts_enc_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -1382,9 +1382,9 @@ ENTRY(camellia_xts_enc_32way)
 	leaq __camellia_enc_blk32, %r9;
 
 	jmp camellia_xts_crypt_32way;
-ENDPROC(camellia_xts_enc_32way)
+SYM_FUNC_END(camellia_xts_enc_32way)
 
-ENTRY(camellia_xts_dec_32way)
+SYM_FUNC_START(camellia_xts_dec_32way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (32 blocks)
@@ -1400,4 +1400,4 @@ ENTRY(camellia_xts_dec_32way)
 	leaq __camellia_dec_blk32, %r9;
 
 	jmp camellia_xts_crypt_32way;
-ENDPROC(camellia_xts_dec_32way)
+SYM_FUNC_END(camellia_xts_dec_32way)
arch/x86/crypto/camellia-x86_64-asm_64.S +8 -8
index 23528bc18fc6..1372e6408850 100644
@@ -175,7 +175,7 @@
 	bswapq				RAB0; \
 	movq RAB0,			4*2(RIO);
 
-ENTRY(__camellia_enc_blk)
+SYM_FUNC_START(__camellia_enc_blk)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -220,9 +220,9 @@ ENTRY(__camellia_enc_blk)
 
 	movq RR12, %r12;
 	ret;
-ENDPROC(__camellia_enc_blk)
+SYM_FUNC_END(__camellia_enc_blk)
 
-ENTRY(camellia_dec_blk)
+SYM_FUNC_START(camellia_dec_blk)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -258,7 +258,7 @@ ENTRY(camellia_dec_blk)
 
 	movq RR12, %r12;
 	ret;
-ENDPROC(camellia_dec_blk)
+SYM_FUNC_END(camellia_dec_blk)
 
 /**********************************************************************
   2-way camellia
@@ -409,7 +409,7 @@ ENDPROC(camellia_dec_blk)
 		bswapq				RAB1; \
 		movq RAB1,			12*2(RIO);
 
-ENTRY(__camellia_enc_blk_2way)
+SYM_FUNC_START(__camellia_enc_blk_2way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -456,9 +456,9 @@ ENTRY(__camellia_enc_blk_2way)
 	movq RR12, %r12;
 	popq %rbx;
 	ret;
-ENDPROC(__camellia_enc_blk_2way)
+SYM_FUNC_END(__camellia_enc_blk_2way)
 
-ENTRY(camellia_dec_blk_2way)
+SYM_FUNC_START(camellia_dec_blk_2way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -496,4 +496,4 @@ ENTRY(camellia_dec_blk_2way)
 	movq RR12, %r12;
 	movq RXOR, %rbx;
 	ret;
-ENDPROC(camellia_dec_blk_2way)
+SYM_FUNC_END(camellia_dec_blk_2way)
arch/x86/crypto/cast5-avx-x86_64-asm_64.S +8 -8
index ef86c6a966de..8a6181b08b59 100644
@@ -359,7 +359,7 @@ SYM_FUNC_START_LOCAL(__cast5_dec_blk16)
 	jmp .L__dec_tail;
 SYM_FUNC_END(__cast5_dec_blk16)
 
-ENTRY(cast5_ecb_enc_16way)
+SYM_FUNC_START(cast5_ecb_enc_16way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -394,9 +394,9 @@ ENTRY(cast5_ecb_enc_16way)
 	popq %r15;
 	FRAME_END
 	ret;
-ENDPROC(cast5_ecb_enc_16way)
+SYM_FUNC_END(cast5_ecb_enc_16way)
 
-ENTRY(cast5_ecb_dec_16way)
+SYM_FUNC_START(cast5_ecb_dec_16way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -432,9 +432,9 @@ ENTRY(cast5_ecb_dec_16way)
 	popq %r15;
 	FRAME_END
 	ret;
-ENDPROC(cast5_ecb_dec_16way)
+SYM_FUNC_END(cast5_ecb_dec_16way)
 
-ENTRY(cast5_cbc_dec_16way)
+SYM_FUNC_START(cast5_cbc_dec_16way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -484,9 +484,9 @@ ENTRY(cast5_cbc_dec_16way)
 	popq %r12;
 	FRAME_END
 	ret;
-ENDPROC(cast5_cbc_dec_16way)
+SYM_FUNC_END(cast5_cbc_dec_16way)
 
-ENTRY(cast5_ctr_16way)
+SYM_FUNC_START(cast5_ctr_16way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -560,4 +560,4 @@ ENTRY(cast5_ctr_16way)
 	popq %r12;
 	FRAME_END
 	ret;
-ENDPROC(cast5_ctr_16way)
+SYM_FUNC_END(cast5_ctr_16way)
arch/x86/crypto/cast6-avx-x86_64-asm_64.S +12 -12
index b080a7454e70..932a3ce32a88 100644
@@ -341,7 +341,7 @@ SYM_FUNC_START_LOCAL(__cast6_dec_blk8)
 	ret;
 SYM_FUNC_END(__cast6_dec_blk8)
 
-ENTRY(cast6_ecb_enc_8way)
+SYM_FUNC_START(cast6_ecb_enc_8way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -362,9 +362,9 @@ ENTRY(cast6_ecb_enc_8way)
 	popq %r15;
 	FRAME_END
 	ret;
-ENDPROC(cast6_ecb_enc_8way)
+SYM_FUNC_END(cast6_ecb_enc_8way)
 
-ENTRY(cast6_ecb_dec_8way)
+SYM_FUNC_START(cast6_ecb_dec_8way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -385,9 +385,9 @@ ENTRY(cast6_ecb_dec_8way)
 	popq %r15;
 	FRAME_END
 	ret;
-ENDPROC(cast6_ecb_dec_8way)
+SYM_FUNC_END(cast6_ecb_dec_8way)
 
-ENTRY(cast6_cbc_dec_8way)
+SYM_FUNC_START(cast6_cbc_dec_8way)
 	/* input:
 	 *	%rdi: ctx
 	 *	%rsi: dst
@@ -411,9 +411,9 @@ ENTRY(cast6_cbc_dec_8way)
 	popq %r12;
 	FRAME_END
 	ret;
-ENDPROC(cast6_cbc_dec_8way)
+SYM_FUNC_END(cast6_cbc_dec_8way)
 
-ENTRY(cast6_ctr_8way)
+SYM_FUNC_START(cast6_ctr_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -439,9 +439,9 @@ ENTRY(cast6_ctr_8way)
 	popq %r12;
 	FRAME_END
 	ret;
-ENDPROC(cast6_ctr_8way)
+SYM_FUNC_END(cast6_ctr_8way)
 
-ENTRY(cast6_xts_enc_8way)
+SYM_FUNC_START(cast6_xts_enc_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -466,9 +466,9 @@ ENTRY(cast6_xts_enc_8way)
 	popq %r15;
 	FRAME_END
 	ret;
-ENDPROC(cast6_xts_enc_8way)
+SYM_FUNC_END(cast6_xts_enc_8way)
 
-ENTRY(cast6_xts_dec_8way)
+SYM_FUNC_START(cast6_xts_dec_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -493,4 +493,4 @@ ENTRY(cast6_xts_dec_8way)
 	popq %r15;
 	FRAME_END
 	ret;
-ENDPROC(cast6_xts_dec_8way)
+SYM_FUNC_END(cast6_xts_dec_8way)
arch/x86/crypto/chacha-avx2-x86_64.S +6 -6
index 831e4434fc20..ee9a40ab4109 100644
@@ -34,7 +34,7 @@ CTR4BL:	.octa 0x00000000000000000000000000000002
 
 .text
 
-ENTRY(chacha_2block_xor_avx2)
+SYM_FUNC_START(chacha_2block_xor_avx2)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 2 data blocks output, o
 	# %rdx: up to 2 data blocks input, i
@@ -224,9 +224,9 @@ ENTRY(chacha_2block_xor_avx2)
 	lea		-8(%r10),%rsp
 	jmp		.Ldone2
 
-ENDPROC(chacha_2block_xor_avx2)
+SYM_FUNC_END(chacha_2block_xor_avx2)
 
-ENTRY(chacha_4block_xor_avx2)
+SYM_FUNC_START(chacha_4block_xor_avx2)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 4 data blocks output, o
 	# %rdx: up to 4 data blocks input, i
@@ -529,9 +529,9 @@ ENTRY(chacha_4block_xor_avx2)
 	lea		-8(%r10),%rsp
 	jmp		.Ldone4
 
-ENDPROC(chacha_4block_xor_avx2)
+SYM_FUNC_END(chacha_4block_xor_avx2)
 
-ENTRY(chacha_8block_xor_avx2)
+SYM_FUNC_START(chacha_8block_xor_avx2)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 8 data blocks output, o
 	# %rdx: up to 8 data blocks input, i
@@ -1018,4 +1018,4 @@ ENTRY(chacha_8block_xor_avx2)
 
 	jmp		.Ldone8
 
-ENDPROC(chacha_8block_xor_avx2)
+SYM_FUNC_END(chacha_8block_xor_avx2)
arch/x86/crypto/chacha-avx512vl-x86_64.S +6 -6
index 848f9c75fd4f..bb193fde123a 100644
@@ -24,7 +24,7 @@ CTR8BL:	.octa 0x00000003000000020000000100000000
 
 .text
 
-ENTRY(chacha_2block_xor_avx512vl)
+SYM_FUNC_START(chacha_2block_xor_avx512vl)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 2 data blocks output, o
 	# %rdx: up to 2 data blocks input, i
@@ -187,9 +187,9 @@ ENTRY(chacha_2block_xor_avx512vl)
 
 	jmp		.Ldone2
 
-ENDPROC(chacha_2block_xor_avx512vl)
+SYM_FUNC_END(chacha_2block_xor_avx512vl)
 
-ENTRY(chacha_4block_xor_avx512vl)
+SYM_FUNC_START(chacha_4block_xor_avx512vl)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 4 data blocks output, o
 	# %rdx: up to 4 data blocks input, i
@@ -453,9 +453,9 @@ ENTRY(chacha_4block_xor_avx512vl)
 
 	jmp		.Ldone4
 
-ENDPROC(chacha_4block_xor_avx512vl)
+SYM_FUNC_END(chacha_4block_xor_avx512vl)
 
-ENTRY(chacha_8block_xor_avx512vl)
+SYM_FUNC_START(chacha_8block_xor_avx512vl)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 8 data blocks output, o
 	# %rdx: up to 8 data blocks input, i
@@ -833,4 +833,4 @@ ENTRY(chacha_8block_xor_avx512vl)
 
 	jmp		.Ldone8
 
-ENDPROC(chacha_8block_xor_avx512vl)
+SYM_FUNC_END(chacha_8block_xor_avx512vl)
arch/x86/crypto/chacha-ssse3-x86_64.S +6 -6
index 361d2bfc253c..a38ab2512a6f 100644
@@ -111,7 +111,7 @@ SYM_FUNC_START_LOCAL(chacha_permute)
 	ret
 SYM_FUNC_END(chacha_permute)
 
-ENTRY(chacha_block_xor_ssse3)
+SYM_FUNC_START(chacha_block_xor_ssse3)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 1 data block output, o
 	# %rdx: up to 1 data block input, i
@@ -197,9 +197,9 @@ ENTRY(chacha_block_xor_ssse3)
 	lea		-8(%r10),%rsp
 	jmp		.Ldone
 
-ENDPROC(chacha_block_xor_ssse3)
+SYM_FUNC_END(chacha_block_xor_ssse3)
 
-ENTRY(hchacha_block_ssse3)
+SYM_FUNC_START(hchacha_block_ssse3)
 	# %rdi: Input state matrix, s
 	# %rsi: output (8 32-bit words)
 	# %edx: nrounds
@@ -218,9 +218,9 @@ ENTRY(hchacha_block_ssse3)
 
 	FRAME_END
 	ret
-ENDPROC(hchacha_block_ssse3)
+SYM_FUNC_END(hchacha_block_ssse3)
 
-ENTRY(chacha_4block_xor_ssse3)
+SYM_FUNC_START(chacha_4block_xor_ssse3)
 	# %rdi: Input state matrix, s
 	# %rsi: up to 4 data blocks output, o
 	# %rdx: up to 4 data blocks input, i
@@ -788,4 +788,4 @@ ENTRY(chacha_4block_xor_ssse3)
 
 	jmp		.Ldone4
 
-ENDPROC(chacha_4block_xor_ssse3)
+SYM_FUNC_END(chacha_4block_xor_ssse3)
arch/x86/crypto/crc32-pclmul_asm.S +2 -2
index 1c099dc08cc3..9fd28ff65bc2 100644
@@ -103,7 +103,7 @@
  *	                     size_t len, uint crc32)
  */
 
-ENTRY(crc32_pclmul_le_16) /* buffer and buffer size are 16 bytes aligned */
+SYM_FUNC_START(crc32_pclmul_le_16) /* buffer and buffer size are 16 bytes aligned */
 	movdqa  (BUF), %xmm1
 	movdqa  0x10(BUF), %xmm2
 	movdqa  0x20(BUF), %xmm3
@@ -238,4 +238,4 @@ fold_64:
 	PEXTRD  0x01, %xmm1, %eax
 
 	ret
-ENDPROC(crc32_pclmul_le_16)
+SYM_FUNC_END(crc32_pclmul_le_16)
arch/x86/crypto/crc32c-pcl-intel-asm_64.S +2 -2
index d9b734d0c8cc..0e6690e3618c 100644
@@ -74,7 +74,7 @@
 # unsigned int crc_pcl(u8 *buffer, int len, unsigned int crc_init);
 
 .text
-ENTRY(crc_pcl)
+SYM_FUNC_START(crc_pcl)
 #define    bufp		%rdi
 #define    bufp_dw	%edi
 #define    bufp_w	%di
@@ -311,7 +311,7 @@ do_return:
 	popq    %rdi
 	popq    %rbx
         ret
-ENDPROC(crc_pcl)
+SYM_FUNC_END(crc_pcl)
 
 .section	.rodata, "a", @progbits
         ################################################################
arch/x86/crypto/crct10dif-pcl-asm_64.S +2 -2
index 3d873e67749d..b2533d63030e 100644
@@ -95,7 +95,7 @@
 # Assumes len >= 16.
 #
 .align 16
-ENTRY(crc_t10dif_pcl)
+SYM_FUNC_START(crc_t10dif_pcl)
 
 	movdqa	.Lbswap_mask(%rip), BSWAP_MASK
 
@@ -280,7 +280,7 @@ ENTRY(crc_t10dif_pcl)
 	jge	.Lfold_16_bytes_loop		# 32 <= len <= 255
 	add	$16, len
 	jmp	.Lhandle_partial_segment	# 17 <= len <= 31
-ENDPROC(crc_t10dif_pcl)
+SYM_FUNC_END(crc_t10dif_pcl)
 
 .section	.rodata, "a", @progbits
 .align 16
arch/x86/crypto/des3_ede-asm_64.S +4 -4
index 7fca43099a5f..fac0fdc3f25d 100644
@@ -162,7 +162,7 @@
 	movl   left##d,   (io); \
 	movl   right##d, 4(io);
 
-ENTRY(des3_ede_x86_64_crypt_blk)
+SYM_FUNC_START(des3_ede_x86_64_crypt_blk)
 	/* input:
 	 *	%rdi: round keys, CTX
 	 *	%rsi: dst
@@ -244,7 +244,7 @@ ENTRY(des3_ede_x86_64_crypt_blk)
 	popq %rbx;
 
 	ret;
-ENDPROC(des3_ede_x86_64_crypt_blk)
+SYM_FUNC_END(des3_ede_x86_64_crypt_blk)
 
 /***********************************************************************
  * 3-way 3DES
@@ -418,7 +418,7 @@ ENDPROC(des3_ede_x86_64_crypt_blk)
 #define __movq(src, dst) \
 	movq src, dst;
 
-ENTRY(des3_ede_x86_64_crypt_blk_3way)
+SYM_FUNC_START(des3_ede_x86_64_crypt_blk_3way)
 	/* input:
 	 *	%rdi: ctx, round keys
 	 *	%rsi: dst (3 blocks)
@@ -529,7 +529,7 @@ ENTRY(des3_ede_x86_64_crypt_blk_3way)
 	popq %rbx;
 
 	ret;
-ENDPROC(des3_ede_x86_64_crypt_blk_3way)
+SYM_FUNC_END(des3_ede_x86_64_crypt_blk_3way)
 
 .section	.rodata, "a", @progbits
 .align 16
arch/x86/crypto/ghash-clmulni-intel_asm.S +4 -4
index e81da25a33ca..bb9735fbb865 100644
@@ -90,7 +90,7 @@ SYM_FUNC_START_LOCAL(__clmul_gf128mul_ble)
 SYM_FUNC_END(__clmul_gf128mul_ble)
 
 /* void clmul_ghash_mul(char *dst, const u128 *shash) */
-ENTRY(clmul_ghash_mul)
+SYM_FUNC_START(clmul_ghash_mul)
 	FRAME_BEGIN
 	movups (%rdi), DATA
 	movups (%rsi), SHASH
@@ -101,13 +101,13 @@ ENTRY(clmul_ghash_mul)
 	movups DATA, (%rdi)
 	FRAME_END
 	ret
-ENDPROC(clmul_ghash_mul)
+SYM_FUNC_END(clmul_ghash_mul)
 
 /*
  * void clmul_ghash_update(char *dst, const char *src, unsigned int srclen,
  *			   const u128 *shash);
  */
-ENTRY(clmul_ghash_update)
+SYM_FUNC_START(clmul_ghash_update)
 	FRAME_BEGIN
 	cmp $16, %rdx
 	jb .Lupdate_just_ret	# check length
@@ -130,4 +130,4 @@ ENTRY(clmul_ghash_update)
 .Lupdate_just_ret:
 	FRAME_END
 	ret
-ENDPROC(clmul_ghash_update)
+SYM_FUNC_END(clmul_ghash_update)
arch/x86/crypto/nh-avx2-x86_64.S +2 -2
index f7946ea1b704..b22c7b936272 100644
@@ -69,7 +69,7 @@
  *
  * It's guaranteed that message_len % 16 == 0.
  */
-ENTRY(nh_avx2)
+SYM_FUNC_START(nh_avx2)
 
 	vmovdqu		0x00(KEY), K0
 	vmovdqu		0x10(KEY), K1
@@ -154,4 +154,4 @@ ENTRY(nh_avx2)
 	vpaddq		T4, T0, T0
 	vmovdqu		T0, (HASH)
 	ret
-ENDPROC(nh_avx2)
+SYM_FUNC_END(nh_avx2)
arch/x86/crypto/nh-sse2-x86_64.S +2 -2
index 51f52d4ab4bb..d7ae22dd6683 100644
@@ -71,7 +71,7 @@
  *
  * It's guaranteed that message_len % 16 == 0.
  */
-ENTRY(nh_sse2)
+SYM_FUNC_START(nh_sse2)
 
 	movdqu		0x00(KEY), K0
 	movdqu		0x10(KEY), K1
@@ -120,4 +120,4 @@ ENTRY(nh_sse2)
 	movdqu		T0, 0x00(HASH)
 	movdqu		T1, 0x10(HASH)
 	ret
-ENDPROC(nh_sse2)
+SYM_FUNC_END(nh_sse2)
arch/x86/crypto/poly1305-avx2-x86_64.S +2 -2
index 8b341bc29d41..d6063feda9da 100644
@@ -79,7 +79,7 @@ ORMASK:	.octa 0x00000000010000000000000001000000
 #define d3 %r12
 #define d4 %r13
 
-ENTRY(poly1305_4block_avx2)
+SYM_FUNC_START(poly1305_4block_avx2)
 	# %rdi: Accumulator h[5]
 	# %rsi: 64 byte input block m
 	# %rdx: Poly1305 key r[5]
@@ -387,4 +387,4 @@ ENTRY(poly1305_4block_avx2)
 	pop		%r12
 	pop		%rbx
 	ret
-ENDPROC(poly1305_4block_avx2)
+SYM_FUNC_END(poly1305_4block_avx2)
arch/x86/crypto/poly1305-sse2-x86_64.S +4 -4
index 5578f846e622..d8ea29b96640 100644
@@ -46,7 +46,7 @@ ORMASK:	.octa 0x00000000010000000000000001000000
 #define d3 %r11
 #define d4 %r12
 
-ENTRY(poly1305_block_sse2)
+SYM_FUNC_START(poly1305_block_sse2)
 	# %rdi: Accumulator h[5]
 	# %rsi: 16 byte input block m
 	# %rdx: Poly1305 key r[5]
@@ -276,7 +276,7 @@ ENTRY(poly1305_block_sse2)
 	pop		%r12
 	pop		%rbx
 	ret
-ENDPROC(poly1305_block_sse2)
+SYM_FUNC_END(poly1305_block_sse2)
 
 
 #define u0 0x00(%r8)
@@ -301,7 +301,7 @@ ENDPROC(poly1305_block_sse2)
 #undef d0
 #define d0 %r13
 
-ENTRY(poly1305_2block_sse2)
+SYM_FUNC_START(poly1305_2block_sse2)
 	# %rdi: Accumulator h[5]
 	# %rsi: 16 byte input block m
 	# %rdx: Poly1305 key r[5]
@@ -587,4 +587,4 @@ ENTRY(poly1305_2block_sse2)
 	pop		%r12
 	pop		%rbx
 	ret
-ENDPROC(poly1305_2block_sse2)
+SYM_FUNC_END(poly1305_2block_sse2)
arch/x86/crypto/serpent-avx-x86_64-asm_64.S +12 -12
index a098aa015784..ba9e4c1e7f5c 100644
@@ -662,7 +662,7 @@ SYM_FUNC_START_LOCAL(__serpent_dec_blk8_avx)
 	ret;
 SYM_FUNC_END(__serpent_dec_blk8_avx)
 
-ENTRY(serpent_ecb_enc_8way_avx)
+SYM_FUNC_START(serpent_ecb_enc_8way_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -678,9 +678,9 @@ ENTRY(serpent_ecb_enc_8way_avx)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_ecb_enc_8way_avx)
+SYM_FUNC_END(serpent_ecb_enc_8way_avx)
 
-ENTRY(serpent_ecb_dec_8way_avx)
+SYM_FUNC_START(serpent_ecb_dec_8way_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -696,9 +696,9 @@ ENTRY(serpent_ecb_dec_8way_avx)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_ecb_dec_8way_avx)
+SYM_FUNC_END(serpent_ecb_dec_8way_avx)
 
-ENTRY(serpent_cbc_dec_8way_avx)
+SYM_FUNC_START(serpent_cbc_dec_8way_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -714,9 +714,9 @@ ENTRY(serpent_cbc_dec_8way_avx)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_cbc_dec_8way_avx)
+SYM_FUNC_END(serpent_cbc_dec_8way_avx)
 
-ENTRY(serpent_ctr_8way_avx)
+SYM_FUNC_START(serpent_ctr_8way_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -734,9 +734,9 @@ ENTRY(serpent_ctr_8way_avx)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_ctr_8way_avx)
+SYM_FUNC_END(serpent_ctr_8way_avx)
 
-ENTRY(serpent_xts_enc_8way_avx)
+SYM_FUNC_START(serpent_xts_enc_8way_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -756,9 +756,9 @@ ENTRY(serpent_xts_enc_8way_avx)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_xts_enc_8way_avx)
+SYM_FUNC_END(serpent_xts_enc_8way_avx)
 
-ENTRY(serpent_xts_dec_8way_avx)
+SYM_FUNC_START(serpent_xts_dec_8way_avx)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -778,4 +778,4 @@ ENTRY(serpent_xts_dec_8way_avx)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_xts_dec_8way_avx)
+SYM_FUNC_END(serpent_xts_dec_8way_avx)
arch/x86/crypto/serpent-avx2-asm_64.S +12 -12
index 6149ba80b4d1..c9648aeae705 100644
@@ -668,7 +668,7 @@ SYM_FUNC_START_LOCAL(__serpent_dec_blk16)
 	ret;
 SYM_FUNC_END(__serpent_dec_blk16)
 
-ENTRY(serpent_ecb_enc_16way)
+SYM_FUNC_START(serpent_ecb_enc_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -688,9 +688,9 @@ ENTRY(serpent_ecb_enc_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_ecb_enc_16way)
+SYM_FUNC_END(serpent_ecb_enc_16way)
 
-ENTRY(serpent_ecb_dec_16way)
+SYM_FUNC_START(serpent_ecb_dec_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -710,9 +710,9 @@ ENTRY(serpent_ecb_dec_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_ecb_dec_16way)
+SYM_FUNC_END(serpent_ecb_dec_16way)
 
-ENTRY(serpent_cbc_dec_16way)
+SYM_FUNC_START(serpent_cbc_dec_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -733,9 +733,9 @@ ENTRY(serpent_cbc_dec_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_cbc_dec_16way)
+SYM_FUNC_END(serpent_cbc_dec_16way)
 
-ENTRY(serpent_ctr_16way)
+SYM_FUNC_START(serpent_ctr_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -758,9 +758,9 @@ ENTRY(serpent_ctr_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_ctr_16way)
+SYM_FUNC_END(serpent_ctr_16way)
 
-ENTRY(serpent_xts_enc_16way)
+SYM_FUNC_START(serpent_xts_enc_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -784,9 +784,9 @@ ENTRY(serpent_xts_enc_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_xts_enc_16way)
+SYM_FUNC_END(serpent_xts_enc_16way)
 
-ENTRY(serpent_xts_dec_16way)
+SYM_FUNC_START(serpent_xts_dec_16way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst (16 blocks)
@@ -810,4 +810,4 @@ ENTRY(serpent_xts_dec_16way)
 
 	FRAME_END
 	ret;
-ENDPROC(serpent_xts_dec_16way)
+SYM_FUNC_END(serpent_xts_dec_16way)
arch/x86/crypto/serpent-sse2-x86_64-asm_64.S +4 -4
index 5e0b3a3e97af..efb6dc17dc90 100644
@@ -619,7 +619,7 @@
 	pxor t0,		x3; \
 	movdqu x3,		(3*4*4)(out);
 
-ENTRY(__serpent_enc_blk_8way)
+SYM_FUNC_START(__serpent_enc_blk_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -682,9 +682,9 @@ ENTRY(__serpent_enc_blk_8way)
 	xor_blocks(%rax, RA2, RB2, RC2, RD2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(__serpent_enc_blk_8way)
+SYM_FUNC_END(__serpent_enc_blk_8way)
 
-ENTRY(serpent_dec_blk_8way)
+SYM_FUNC_START(serpent_dec_blk_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -736,4 +736,4 @@ ENTRY(serpent_dec_blk_8way)
 	write_blocks(%rax, RC2, RD2, RB2, RE2, RK0, RK1, RK2);
 
 	ret;
-ENDPROC(serpent_dec_blk_8way)
+SYM_FUNC_END(serpent_dec_blk_8way)
arch/x86/crypto/sha1_avx2_x86_64_asm.S +2 -2
index 9f712a7dfd79..6decc85ef7b7 100644
@@ -634,7 +634,7 @@ _loop3:
  * param: function's name
  */
 .macro SHA1_VECTOR_ASM  name
-	ENTRY(\name)
+	SYM_FUNC_START(\name)
 
 	push	%rbx
 	push	%r12
@@ -676,7 +676,7 @@ _loop3:
 
 	ret
 
-	ENDPROC(\name)
+	SYM_FUNC_END(\name)
 .endm
 
 .section .rodata
arch/x86/crypto/sha1_ni_asm.S +2 -2
index ebbdba72ae07..11efe3a45a1f 100644
@@ -95,7 +95,7 @@
  */
 .text
 .align 32
-ENTRY(sha1_ni_transform)
+SYM_FUNC_START(sha1_ni_transform)
 	mov		%rsp, RSPSAVE
 	sub		$FRAME_SIZE, %rsp
 	and		$~0xF, %rsp
@@ -291,7 +291,7 @@ ENTRY(sha1_ni_transform)
 	mov		RSPSAVE, %rsp
 
 	ret
-ENDPROC(sha1_ni_transform)
+SYM_FUNC_END(sha1_ni_transform)
 
 .section	.rodata.cst16.PSHUFFLE_BYTE_FLIP_MASK, "aM", @progbits, 16
 .align 16
arch/x86/crypto/sha1_ssse3_asm.S +2 -2
index 99c5b8c4dc38..5d03c1173690 100644
@@ -67,7 +67,7 @@
  * param: function's name
  */
 .macro SHA1_VECTOR_ASM  name
-	ENTRY(\name)
+	SYM_FUNC_START(\name)
 
 	push	%rbx
 	push	%r12
@@ -101,7 +101,7 @@
 	pop	%rbx
 	ret
 
-	ENDPROC(\name)
+	SYM_FUNC_END(\name)
 .endm
 
 /*
arch/x86/crypto/sha256-avx-asm.S +2 -2
index 001bbcf93c79..22e14c8dd2e4 100644
@@ -347,7 +347,7 @@ a = TMP_
 ## arg 3 : Num blocks
 ########################################################################
 .text
-ENTRY(sha256_transform_avx)
+SYM_FUNC_START(sha256_transform_avx)
 .align 32
 	pushq   %rbx
 	pushq   %r12
@@ -460,7 +460,7 @@ done_hash:
 	popq	%r12
 	popq    %rbx
 	ret
-ENDPROC(sha256_transform_avx)
+SYM_FUNC_END(sha256_transform_avx)
 
 .section	.rodata.cst256.K256, "aM", @progbits, 256
 .align 64
arch/x86/crypto/sha256-avx2-asm.S +2 -2
index 1420db15dcdd..519b551ad576 100644
@@ -526,7 +526,7 @@ STACK_SIZE	= _RSP      + _RSP_SIZE
 ## arg 3 : Num blocks
 ########################################################################
 .text
-ENTRY(sha256_transform_rorx)
+SYM_FUNC_START(sha256_transform_rorx)
 .align 32
 	pushq	%rbx
 	pushq	%r12
@@ -713,7 +713,7 @@ done_hash:
 	popq	%r12
 	popq	%rbx
 	ret
-ENDPROC(sha256_transform_rorx)
+SYM_FUNC_END(sha256_transform_rorx)
 
 .section	.rodata.cst512.K256, "aM", @progbits, 512
 .align 64
arch/x86/crypto/sha256-ssse3-asm.S +2 -2
index c6c05ed2c16a..69cc2f91dc4c 100644
@@ -353,7 +353,7 @@ a = TMP_
 ## arg 3 : Num blocks
 ########################################################################
 .text
-ENTRY(sha256_transform_ssse3)
+SYM_FUNC_START(sha256_transform_ssse3)
 .align 32
 	pushq   %rbx
 	pushq   %r12
@@ -471,7 +471,7 @@ done_hash:
 	popq    %rbx
 
 	ret
-ENDPROC(sha256_transform_ssse3)
+SYM_FUNC_END(sha256_transform_ssse3)
 
 .section	.rodata.cst256.K256, "aM", @progbits, 256
 .align 64
arch/x86/crypto/sha256_ni_asm.S +2 -2
index fb58f58ecfbc..7abade04a3a3 100644
@@ -97,7 +97,7 @@
 
 .text
 .align 32
-ENTRY(sha256_ni_transform)
+SYM_FUNC_START(sha256_ni_transform)
 
 	shl		$6, NUM_BLKS		/*  convert to bytes */
 	jz		.Ldone_hash
@@ -327,7 +327,7 @@ ENTRY(sha256_ni_transform)
 .Ldone_hash:
 
 	ret
-ENDPROC(sha256_ni_transform)
+SYM_FUNC_END(sha256_ni_transform)
 
 .section	.rodata.cst256.K256, "aM", @progbits, 256
 .align 64
arch/x86/crypto/sha512-avx-asm.S +2 -2
index 39235fefe6f7..3704ddd7e5d5 100644
@@ -277,7 +277,7 @@ frame_size = frame_GPRSAVE + GPRSAVE_SIZE
 # message blocks.
 # L is the message length in SHA512 blocks
 ########################################################################
-ENTRY(sha512_transform_avx)
+SYM_FUNC_START(sha512_transform_avx)
 	cmp $0, msglen
 	je nowork
 
@@ -365,7 +365,7 @@ updateblock:
 
 nowork:
 	ret
-ENDPROC(sha512_transform_avx)
+SYM_FUNC_END(sha512_transform_avx)
 
 ########################################################################
 ### Binary Data
arch/x86/crypto/sha512-avx2-asm.S +2 -2
index b16d56005162..80d830e7ee09 100644
@@ -569,7 +569,7 @@ frame_size = frame_GPRSAVE + GPRSAVE_SIZE
 #   message blocks.
 # L is the message length in SHA512 blocks
 ########################################################################
-ENTRY(sha512_transform_rorx)
+SYM_FUNC_START(sha512_transform_rorx)
 	# Allocate Stack Space
 	mov	%rsp, %rax
 	sub	$frame_size, %rsp
@@ -682,7 +682,7 @@ done_hash:
 	# Restore Stack Pointer
 	mov	frame_RSPSAVE(%rsp), %rsp
 	ret
-ENDPROC(sha512_transform_rorx)
+SYM_FUNC_END(sha512_transform_rorx)
 
 ########################################################################
 ### Binary Data
arch/x86/crypto/sha512-ssse3-asm.S +2 -2
index 66bbd9058a90..838f984e95d9 100644
@@ -275,7 +275,7 @@ frame_size = frame_GPRSAVE + GPRSAVE_SIZE
 #   message blocks.
 # L is the message length in SHA512 blocks.
 ########################################################################
-ENTRY(sha512_transform_ssse3)
+SYM_FUNC_START(sha512_transform_ssse3)
 
 	cmp $0, msglen
 	je nowork
@@ -364,7 +364,7 @@ updateblock:
 
 nowork:
 	ret
-ENDPROC(sha512_transform_ssse3)
+SYM_FUNC_END(sha512_transform_ssse3)
 
 ########################################################################
 ### Binary Data
arch/x86/crypto/twofish-avx-x86_64-asm_64.S +12 -12
index 588f0a2f63ab..a5151393bb2f 100644
@@ -315,7 +315,7 @@ SYM_FUNC_START_LOCAL(__twofish_dec_blk8)
 	ret;
 SYM_FUNC_END(__twofish_dec_blk8)
 
-ENTRY(twofish_ecb_enc_8way)
+SYM_FUNC_START(twofish_ecb_enc_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -333,9 +333,9 @@ ENTRY(twofish_ecb_enc_8way)
 
 	FRAME_END
 	ret;
-ENDPROC(twofish_ecb_enc_8way)
+SYM_FUNC_END(twofish_ecb_enc_8way)
 
-ENTRY(twofish_ecb_dec_8way)
+SYM_FUNC_START(twofish_ecb_dec_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -353,9 +353,9 @@ ENTRY(twofish_ecb_dec_8way)
 
 	FRAME_END
 	ret;
-ENDPROC(twofish_ecb_dec_8way)
+SYM_FUNC_END(twofish_ecb_dec_8way)
 
-ENTRY(twofish_cbc_dec_8way)
+SYM_FUNC_START(twofish_cbc_dec_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -378,9 +378,9 @@ ENTRY(twofish_cbc_dec_8way)
 
 	FRAME_END
 	ret;
-ENDPROC(twofish_cbc_dec_8way)
+SYM_FUNC_END(twofish_cbc_dec_8way)
 
-ENTRY(twofish_ctr_8way)
+SYM_FUNC_START(twofish_ctr_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -405,9 +405,9 @@ ENTRY(twofish_ctr_8way)
 
 	FRAME_END
 	ret;
-ENDPROC(twofish_ctr_8way)
+SYM_FUNC_END(twofish_ctr_8way)
 
-ENTRY(twofish_xts_enc_8way)
+SYM_FUNC_START(twofish_xts_enc_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -429,9 +429,9 @@ ENTRY(twofish_xts_enc_8way)
 
 	FRAME_END
 	ret;
-ENDPROC(twofish_xts_enc_8way)
+SYM_FUNC_END(twofish_xts_enc_8way)
 
-ENTRY(twofish_xts_dec_8way)
+SYM_FUNC_START(twofish_xts_dec_8way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -453,4 +453,4 @@ ENTRY(twofish_xts_dec_8way)
 
 	FRAME_END
 	ret;
-ENDPROC(twofish_xts_dec_8way)
+SYM_FUNC_END(twofish_xts_dec_8way)
arch/x86/crypto/twofish-x86_64-asm_64-3way.S +4 -4
index e495e07c7f1b..fc23552afe37 100644
@@ -220,7 +220,7 @@
 	rorq $32,			RAB2; \
 	outunpack3(mov, RIO, 2, RAB, 2);
 
-ENTRY(__twofish_enc_blk_3way)
+SYM_FUNC_START(__twofish_enc_blk_3way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -267,9 +267,9 @@ ENTRY(__twofish_enc_blk_3way)
 	popq %r12;
 	popq %r13;
 	ret;
-ENDPROC(__twofish_enc_blk_3way)
+SYM_FUNC_END(__twofish_enc_blk_3way)
 
-ENTRY(twofish_dec_blk_3way)
+SYM_FUNC_START(twofish_dec_blk_3way)
 	/* input:
 	 *	%rdi: ctx, CTX
 	 *	%rsi: dst
@@ -302,4 +302,4 @@ ENTRY(twofish_dec_blk_3way)
 	popq %r12;
 	popq %r13;
 	ret;
-ENDPROC(twofish_dec_blk_3way)
+SYM_FUNC_END(twofish_dec_blk_3way)
arch/x86/crypto/twofish-x86_64-asm_64.S +4 -4
index ecef2cb9f43f..d2e56232494a 100644
@@ -202,7 +202,7 @@
 	xor	%r8d,		d ## D;\
 	ror	$1,		d ## D;
 
-ENTRY(twofish_enc_blk)
+SYM_FUNC_START(twofish_enc_blk)
 	pushq    R1
 
 	/* %rdi contains the ctx address */
@@ -253,9 +253,9 @@ ENTRY(twofish_enc_blk)
 	popq	R1
 	movl	$1,%eax
 	ret
-ENDPROC(twofish_enc_blk)
+SYM_FUNC_END(twofish_enc_blk)
 
-ENTRY(twofish_dec_blk)
+SYM_FUNC_START(twofish_dec_blk)
 	pushq    R1
 
 	/* %rdi contains the ctx address */
@@ -305,4 +305,4 @@ ENTRY(twofish_dec_blk)
 	popq	R1
 	movl	$1,%eax
 	ret
-ENDPROC(twofish_dec_blk)
+SYM_FUNC_END(twofish_dec_blk)
arch/x86/entry/entry_64.S +5 -5
index 13e4fe378e5a..d58c01239457 100644
@@ -15,7 +15,7 @@
  *			at the top of the kernel process stack.
  *
  * Some macro usage:
- * - ENTRY/END:		Define functions in the symbol table.
+ * - SYM_FUNC_START/END:Define functions in the symbol table.
  * - TRACE_IRQ_*:	Trace hardirq state for lock debugging.
  * - idtentry:		Define exception entry points.
  */
@@ -1040,7 +1040,7 @@ idtentry simd_coprocessor_error		do_simd_coprocessor_error	has_error_code=0
 	 * Reload gs selector with exception handling
 	 * edi:  new selector
 	 */
-ENTRY(native_load_gs_index)
+SYM_FUNC_START(native_load_gs_index)
 	FRAME_BEGIN
 	pushfq
 	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
@@ -1054,7 +1054,7 @@ ENTRY(native_load_gs_index)
 	popfq
 	FRAME_END
 	ret
-ENDPROC(native_load_gs_index)
+SYM_FUNC_END(native_load_gs_index)
 EXPORT_SYMBOL(native_load_gs_index)
 
 	_ASM_EXTABLE(.Lgs_change, .Lbad_gs)
@@ -1075,7 +1075,7 @@ SYM_CODE_END(.Lbad_gs)
 	.previous
 
 /* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(do_softirq_own_stack)
+SYM_FUNC_START(do_softirq_own_stack)
 	pushq	%rbp
 	mov	%rsp, %rbp
 	ENTER_IRQ_STACK regs=0 old_rsp=%r11
@@ -1083,7 +1083,7 @@ ENTRY(do_softirq_own_stack)
 	LEAVE_IRQ_STACK regs=0
 	leaveq
 	ret
-ENDPROC(do_softirq_own_stack)
+SYM_FUNC_END(do_softirq_own_stack)
 
 #ifdef CONFIG_XEN_PV
 idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0
arch/x86/entry/entry_64_compat.S +2 -2
index da296435676e..f1d3ccae5dd5 100644
@@ -46,7 +46,7 @@
  * ebp  user stack
  * 0(%ebp) arg6
  */
-ENTRY(entry_SYSENTER_compat)
+SYM_FUNC_START(entry_SYSENTER_compat)
 	/* Interrupts are off on entry. */
 	SWAPGS
 
@@ -147,7 +147,7 @@ ENTRY(entry_SYSENTER_compat)
 	popfq
 	jmp	.Lsysenter_flags_fixed
 SYM_INNER_LABEL(__end_entry_SYSENTER_compat, SYM_L_GLOBAL)
-ENDPROC(entry_SYSENTER_compat)
+SYM_FUNC_END(entry_SYSENTER_compat)
 
 /*
  * 32-bit SYSCALL entry.
arch/x86/kernel/acpi/wakeup_64.S +4 -4
index 462a20f386e0..c8daa92f38dc 100644
@@ -14,7 +14,7 @@
 	/*
 	 * Hooray, we are in Long 64-bit mode (but still running in low memory)
 	 */
-ENTRY(wakeup_long64)
+SYM_FUNC_START(wakeup_long64)
 	movq	saved_magic, %rax
 	movq	$0x123456789abcdef0, %rdx
 	cmpq	%rdx, %rax
@@ -40,9 +40,9 @@ ENTRY(wakeup_long64)
 
 	movq	saved_rip, %rax
 	jmp	*%rax
-ENDPROC(wakeup_long64)
+SYM_FUNC_END(wakeup_long64)
 
-ENTRY(do_suspend_lowlevel)
+SYM_FUNC_START(do_suspend_lowlevel)
 	FRAME_BEGIN
 	subq	$8, %rsp
 	xorl	%eax, %eax
@@ -125,7 +125,7 @@ ENTRY(do_suspend_lowlevel)
 	addq	$8, %rsp
 	FRAME_END
 	jmp	restore_processor_state
-ENDPROC(do_suspend_lowlevel)
+SYM_FUNC_END(do_suspend_lowlevel)
 
 .data
 saved_rbp:		.quad	0
arch/x86/kernel/ftrace_64.S +10 -10
index 60f894b018e0..16deae706950 100644
@@ -132,11 +132,11 @@ EXPORT_SYMBOL(__fentry__)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-ENTRY(function_hook)
+SYM_FUNC_START(function_hook)
 	retq
-ENDPROC(function_hook)
+SYM_FUNC_END(function_hook)
 
-ENTRY(ftrace_caller)
+SYM_FUNC_START(ftrace_caller)
 	/* save_mcount_regs fills in first two parameters */
 	save_mcount_regs
 
@@ -170,9 +170,9 @@ SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
  */
 WEAK(ftrace_stub)
 	retq
-ENDPROC(ftrace_caller)
+SYM_FUNC_END(ftrace_caller)
 
-ENTRY(ftrace_regs_caller)
+SYM_FUNC_START(ftrace_regs_caller)
 	/* Save the current flags before any operations that can change them */
 	pushfq
 
@@ -243,12 +243,12 @@ SYM_INNER_LABEL(ftrace_regs_caller_end, SYM_L_GLOBAL)
 
 	jmp ftrace_epilogue
 
-ENDPROC(ftrace_regs_caller)
+SYM_FUNC_END(ftrace_regs_caller)
 
 
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
-ENTRY(function_hook)
+SYM_FUNC_START(function_hook)
 	cmpq $ftrace_stub, ftrace_trace_function
 	jnz trace
 
@@ -279,11 +279,11 @@ trace:
 	restore_mcount_regs
 
 	jmp fgraph_trace
-ENDPROC(function_hook)
+SYM_FUNC_END(function_hook)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
+SYM_FUNC_START(ftrace_graph_caller)
 	/* Saves rbp into %rdx and fills first parameter  */
 	save_mcount_regs
 
@@ -294,7 +294,7 @@ ENTRY(ftrace_graph_caller)
 	restore_mcount_regs
 
 	retq
-ENDPROC(ftrace_graph_caller)
+SYM_FUNC_END(ftrace_graph_caller)
 
 SYM_CODE_START(return_to_handler)
 	UNWIND_HINT_EMPTY
arch/x86/kernel/irqflags.S +4 -4
index ddeeaac8adda..0db0375235b4 100644
@@ -7,20 +7,20 @@
 /*
  * unsigned long native_save_fl(void)
  */
-ENTRY(native_save_fl)
+SYM_FUNC_START(native_save_fl)
 	pushf
 	pop %_ASM_AX
 	ret
-ENDPROC(native_save_fl)
+SYM_FUNC_END(native_save_fl)
 EXPORT_SYMBOL(native_save_fl)
 
 /*
  * void native_restore_fl(unsigned long flags)
  * %eax/%rdi: flags
  */
-ENTRY(native_restore_fl)
+SYM_FUNC_START(native_restore_fl)
 	push %_ASM_ARG1
 	popf
 	ret
-ENDPROC(native_restore_fl)
+SYM_FUNC_END(native_restore_fl)
 EXPORT_SYMBOL(native_restore_fl)
arch/x86/kvm/vmx/vmenter.S +6 -6
index 751a384c2eb0..81ada2ce99e7 100644
@@ -43,7 +43,7 @@
  * they VM-Fail, whereas a successful VM-Enter + VM-Exit will jump
  * to vmx_vmexit.
  */
-ENTRY(vmx_vmenter)
+SYM_FUNC_START(vmx_vmenter)
 	/* EFLAGS.ZF is set if VMCS.LAUNCHED == 0 */
 	je 2f
 
@@ -65,7 +65,7 @@ ENTRY(vmx_vmenter)
 	_ASM_EXTABLE(1b, 5b)
 	_ASM_EXTABLE(2b, 5b)
 
-ENDPROC(vmx_vmenter)
+SYM_FUNC_END(vmx_vmenter)
 
 /**
  * vmx_vmexit - Handle a VMX VM-Exit
@@ -77,7 +77,7 @@ ENDPROC(vmx_vmenter)
  * here after hardware loads the host's state, i.e. this is the destination
  * referred to by VMCS.HOST_RIP.
  */
-ENTRY(vmx_vmexit)
+SYM_FUNC_START(vmx_vmexit)
 #ifdef CONFIG_RETPOLINE
 	ALTERNATIVE "jmp .Lvmexit_skip_rsb", "", X86_FEATURE_RETPOLINE
 	/* Preserve guest's RAX, it's used to stuff the RSB. */
@@ -90,7 +90,7 @@ ENTRY(vmx_vmexit)
 .Lvmexit_skip_rsb:
 #endif
 	ret
-ENDPROC(vmx_vmexit)
+SYM_FUNC_END(vmx_vmexit)
 
 /**
  * __vmx_vcpu_run - Run a vCPU via a transition to VMX guest mode
@@ -101,7 +101,7 @@ ENDPROC(vmx_vmexit)
  * Returns:
  *	0 on VM-Exit, 1 on VM-Fail
  */
-ENTRY(__vmx_vcpu_run)
+SYM_FUNC_START(__vmx_vcpu_run)
 	push %_ASM_BP
 	mov  %_ASM_SP, %_ASM_BP
 #ifdef CONFIG_X86_64
@@ -233,4 +233,4 @@ ENTRY(__vmx_vcpu_run)
 	/* VM-Fail.  Out-of-line to avoid a taken Jcc after VM-Exit. */
 2:	mov $1, %eax
 	jmp 1b
-ENDPROC(__vmx_vcpu_run)
+SYM_FUNC_END(__vmx_vcpu_run)
arch/x86/lib/checksum_32.S +4 -4
index 4df90c9ea383..74256bd193da 100644
@@ -280,7 +280,7 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 #define ARGBASE 16		
 #define FP		12
 		
-ENTRY(csum_partial_copy_generic)
+SYM_FUNC_START(csum_partial_copy_generic)
 	subl  $4,%esp	
 	pushl %edi
 	pushl %esi
@@ -398,7 +398,7 @@ DST(	movb %cl, (%edi)	)
 	popl %edi
 	popl %ecx			# equivalent to addl $4,%esp
 	ret	
-ENDPROC(csum_partial_copy_generic)
+SYM_FUNC_END(csum_partial_copy_generic)
 
 #else
 
@@ -416,7 +416,7 @@ ENDPROC(csum_partial_copy_generic)
 
 #define ARGBASE 12
 		
-ENTRY(csum_partial_copy_generic)
+SYM_FUNC_START(csum_partial_copy_generic)
 	pushl %ebx
 	pushl %edi
 	pushl %esi
@@ -483,7 +483,7 @@ DST(	movb %dl, (%edi)         )
 	popl %edi
 	popl %ebx
 	ret
-ENDPROC(csum_partial_copy_generic)
+SYM_FUNC_END(csum_partial_copy_generic)
 				
 #undef ROUND
 #undef ROUND1		
arch/x86/lib/clear_page_64.S +6 -6
index 75a5a4515fa7..c4c7dd115953 100644
@@ -13,15 +13,15 @@
  * Zero a page.
  * %rdi	- page
  */
-ENTRY(clear_page_rep)
+SYM_FUNC_START(clear_page_rep)
 	movl $4096/8,%ecx
 	xorl %eax,%eax
 	rep stosq
 	ret
-ENDPROC(clear_page_rep)
+SYM_FUNC_END(clear_page_rep)
 EXPORT_SYMBOL_GPL(clear_page_rep)
 
-ENTRY(clear_page_orig)
+SYM_FUNC_START(clear_page_orig)
 	xorl   %eax,%eax
 	movl   $4096/64,%ecx
 	.p2align 4
@@ -40,13 +40,13 @@ ENTRY(clear_page_orig)
 	jnz	.Lloop
 	nop
 	ret
-ENDPROC(clear_page_orig)
+SYM_FUNC_END(clear_page_orig)
 EXPORT_SYMBOL_GPL(clear_page_orig)
 
-ENTRY(clear_page_erms)
+SYM_FUNC_START(clear_page_erms)
 	movl $4096,%ecx
 	xorl %eax,%eax
 	rep stosb
 	ret
-ENDPROC(clear_page_erms)
+SYM_FUNC_END(clear_page_erms)
 EXPORT_SYMBOL_GPL(clear_page_erms)
arch/x86/lib/cmpxchg16b_emu.S +2 -2
index d63185698a23..3542502faa3b 100644
@@ -13,7 +13,7 @@
  * %rcx : high 64 bits of new value
  * %al  : Operation successful
  */
-ENTRY(this_cpu_cmpxchg16b_emu)
+SYM_FUNC_START(this_cpu_cmpxchg16b_emu)
 
 #
 # Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not
@@ -44,4 +44,4 @@ ENTRY(this_cpu_cmpxchg16b_emu)
 	xor %al,%al
 	ret
 
-ENDPROC(this_cpu_cmpxchg16b_emu)
+SYM_FUNC_END(this_cpu_cmpxchg16b_emu)
arch/x86/lib/cmpxchg8b_emu.S +2 -2
index 691d80e97488..ca01ed6029f4 100644
@@ -13,7 +13,7 @@
  * %ebx : low 32 bits of new value
  * %ecx : high 32 bits of new value
  */
-ENTRY(cmpxchg8b_emu)
+SYM_FUNC_START(cmpxchg8b_emu)
 
 #
 # Emulate 'cmpxchg8b (%esi)' on UP except we don't
@@ -42,5 +42,5 @@ ENTRY(cmpxchg8b_emu)
 	popfl
 	ret
 
-ENDPROC(cmpxchg8b_emu)
+SYM_FUNC_END(cmpxchg8b_emu)
 EXPORT_SYMBOL(cmpxchg8b_emu)
arch/x86/lib/copy_page_64.S +2 -2
index f505870bd93b..2402d4c489d2 100644
@@ -13,12 +13,12 @@
  * prefetch distance based on SMP/UP.
  */
 	ALIGN
-ENTRY(copy_page)
+SYM_FUNC_START(copy_page)
 	ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
 	movl	$4096/8, %ecx
 	rep	movsq
 	ret
-ENDPROC(copy_page)
+SYM_FUNC_END(copy_page)
 EXPORT_SYMBOL(copy_page)
 
 SYM_FUNC_START_LOCAL(copy_page_regs)
arch/x86/lib/copy_user_64.S +8 -8
index 4a12b3c120bf..816f128a6d52 100644
@@ -53,7 +53,7 @@
  * Output:
  * eax uncopied bytes or 0 if successful.
  */
-ENTRY(copy_user_generic_unrolled)
+SYM_FUNC_START(copy_user_generic_unrolled)
 	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
@@ -136,7 +136,7 @@ ENTRY(copy_user_generic_unrolled)
 	_ASM_EXTABLE_UA(19b, 40b)
 	_ASM_EXTABLE_UA(21b, 50b)
 	_ASM_EXTABLE_UA(22b, 50b)
-ENDPROC(copy_user_generic_unrolled)
+SYM_FUNC_END(copy_user_generic_unrolled)
 EXPORT_SYMBOL(copy_user_generic_unrolled)
 
 /* Some CPUs run faster using the string copy instructions.
@@ -157,7 +157,7 @@ EXPORT_SYMBOL(copy_user_generic_unrolled)
  * Output:
  * eax uncopied bytes or 0 if successful.
  */
-ENTRY(copy_user_generic_string)
+SYM_FUNC_START(copy_user_generic_string)
 	ASM_STAC
 	cmpl $8,%edx
 	jb 2f		/* less than 8 bytes, go to byte copy loop */
@@ -182,7 +182,7 @@ ENTRY(copy_user_generic_string)
 
 	_ASM_EXTABLE_UA(1b, 11b)
 	_ASM_EXTABLE_UA(3b, 12b)
-ENDPROC(copy_user_generic_string)
+SYM_FUNC_END(copy_user_generic_string)
 EXPORT_SYMBOL(copy_user_generic_string)
 
 /*
@@ -197,7 +197,7 @@ EXPORT_SYMBOL(copy_user_generic_string)
  * Output:
  * eax uncopied bytes or 0 if successful.
  */
-ENTRY(copy_user_enhanced_fast_string)
+SYM_FUNC_START(copy_user_enhanced_fast_string)
 	ASM_STAC
 	cmpl $64,%edx
 	jb .L_copy_short_string	/* less then 64 bytes, avoid the costly 'rep' */
@@ -214,7 +214,7 @@ ENTRY(copy_user_enhanced_fast_string)
 	.previous
 
 	_ASM_EXTABLE_UA(1b, 12b)
-ENDPROC(copy_user_enhanced_fast_string)
+SYM_FUNC_END(copy_user_enhanced_fast_string)
 EXPORT_SYMBOL(copy_user_enhanced_fast_string)
 
 /*
@@ -249,7 +249,7 @@ SYM_CODE_END(.Lcopy_user_handle_tail)
  *  - Require 8-byte alignment when size is 8 bytes or larger.
  *  - Require 4-byte alignment when size is 4 bytes.
  */
-ENTRY(__copy_user_nocache)
+SYM_FUNC_START(__copy_user_nocache)
 	ASM_STAC
 
 	/* If size is less than 8 bytes, go to 4-byte copy */
@@ -388,5 +388,5 @@ ENTRY(__copy_user_nocache)
 	_ASM_EXTABLE_UA(31b, .L_fixup_4b_copy)
 	_ASM_EXTABLE_UA(40b, .L_fixup_1b_copy)
 	_ASM_EXTABLE_UA(41b, .L_fixup_1b_copy)
-ENDPROC(__copy_user_nocache)
+SYM_FUNC_END(__copy_user_nocache)
 EXPORT_SYMBOL(__copy_user_nocache)
arch/x86/lib/csum-copy_64.S +2 -2
index a4a379e79259..3394a8ff7fd0 100644
@@ -49,7 +49,7 @@
 	.endm
 
 
-ENTRY(csum_partial_copy_generic)
+SYM_FUNC_START(csum_partial_copy_generic)
 	cmpl	$3*64, %edx
 	jle	.Lignore
 
@@ -225,4 +225,4 @@ ENTRY(csum_partial_copy_generic)
 	jz   .Lende
 	movl $-EFAULT, (%rax)
 	jmp .Lende
-ENDPROC(csum_partial_copy_generic)
+SYM_FUNC_END(csum_partial_copy_generic)
arch/x86/lib/getuser.S +8 -8
index f9f59eb85635..c8a85b512796 100644
@@ -36,7 +36,7 @@
 #include <asm/export.h>
 
 	.text
-ENTRY(__get_user_1)
+SYM_FUNC_START(__get_user_1)
 	mov PER_CPU_VAR(current_task), %_ASM_DX
 	cmp TASK_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
@@ -47,10 +47,10 @@ ENTRY(__get_user_1)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-ENDPROC(__get_user_1)
+SYM_FUNC_END(__get_user_1)
 EXPORT_SYMBOL(__get_user_1)
 
-ENTRY(__get_user_2)
+SYM_FUNC_START(__get_user_2)
 	add $1,%_ASM_AX
 	jc bad_get_user
 	mov PER_CPU_VAR(current_task), %_ASM_DX
@@ -63,10 +63,10 @@ ENTRY(__get_user_2)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-ENDPROC(__get_user_2)
+SYM_FUNC_END(__get_user_2)
 EXPORT_SYMBOL(__get_user_2)
 
-ENTRY(__get_user_4)
+SYM_FUNC_START(__get_user_4)
 	add $3,%_ASM_AX
 	jc bad_get_user
 	mov PER_CPU_VAR(current_task), %_ASM_DX
@@ -79,10 +79,10 @@ ENTRY(__get_user_4)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-ENDPROC(__get_user_4)
+SYM_FUNC_END(__get_user_4)
 EXPORT_SYMBOL(__get_user_4)
 
-ENTRY(__get_user_8)
+SYM_FUNC_START(__get_user_8)
 #ifdef CONFIG_X86_64
 	add $7,%_ASM_AX
 	jc bad_get_user
@@ -111,7 +111,7 @@ ENTRY(__get_user_8)
 	ASM_CLAC
 	ret
 #endif
-ENDPROC(__get_user_8)
+SYM_FUNC_END(__get_user_8)
 EXPORT_SYMBOL(__get_user_8)
 
 
arch/x86/lib/hweight.S +4 -4
index a14f9939c365..dbf8cc97b7f5 100644
@@ -8,7 +8,7 @@
  * unsigned int __sw_hweight32(unsigned int w)
  * %rdi: w
  */
-ENTRY(__sw_hweight32)
+SYM_FUNC_START(__sw_hweight32)
 
 #ifdef CONFIG_X86_64
 	movl %edi, %eax				# w
@@ -33,10 +33,10 @@ ENTRY(__sw_hweight32)
 	shrl $24, %eax				# w = w_tmp >> 24
 	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	ret
-ENDPROC(__sw_hweight32)
+SYM_FUNC_END(__sw_hweight32)
 EXPORT_SYMBOL(__sw_hweight32)
 
-ENTRY(__sw_hweight64)
+SYM_FUNC_START(__sw_hweight64)
 #ifdef CONFIG_X86_64
 	pushq   %rdi
 	pushq   %rdx
@@ -79,5 +79,5 @@ ENTRY(__sw_hweight64)
 	popl    %ecx
 	ret
 #endif
-ENDPROC(__sw_hweight64)
+SYM_FUNC_END(__sw_hweight64)
 EXPORT_SYMBOL(__sw_hweight64)
arch/x86/lib/iomap_copy_64.S +2 -2
index a9bdf0805be0..cb5a1964506b 100644
@@ -8,8 +8,8 @@
 /*
  * override generic version in lib/iomap_copy.c
  */
-ENTRY(__iowrite32_copy)
+SYM_FUNC_START(__iowrite32_copy)
 	movl %edx,%ecx
 	rep movsd
 	ret
-ENDPROC(__iowrite32_copy)
+SYM_FUNC_END(__iowrite32_copy)
arch/x86/lib/memcpy_64.S +2 -2
index 3265b21e86c0..56b243b14c3a 100644
@@ -193,7 +193,7 @@ MCSAFE_TEST_CTL
  * Note that we only catch machine checks when reading the source addresses.
  * Writes to target are posted and don't generate machine checks.
  */
-ENTRY(__memcpy_mcsafe)
+SYM_FUNC_START(__memcpy_mcsafe)
 	cmpl $8, %edx
 	/* Less than 8 bytes? Go to byte copy loop */
 	jb .L_no_whole_words
@@ -260,7 +260,7 @@ ENTRY(__memcpy_mcsafe)
 	xorl %eax, %eax
 .L_done:
 	ret
-ENDPROC(__memcpy_mcsafe)
+SYM_FUNC_END(__memcpy_mcsafe)
 EXPORT_SYMBOL_GPL(__memcpy_mcsafe)
 
 	.section .fixup, "ax"
arch/x86/lib/memmove_64.S +2 -2
index 50c1648311b3..337830d7a59c 100644
@@ -27,7 +27,7 @@
 .weak memmove
 
 SYM_FUNC_START_ALIAS(memmove)
-ENTRY(__memmove)
+SYM_FUNC_START(__memmove)
 
 	/* Handle more 32 bytes in loop */
 	mov %rdi, %rax
@@ -207,7 +207,7 @@ ENTRY(__memmove)
 	movb %r11b, (%rdi)
 13:
 	retq
-ENDPROC(__memmove)
+SYM_FUNC_END(__memmove)
 SYM_FUNC_END_ALIAS(memmove)
 EXPORT_SYMBOL(__memmove)
 EXPORT_SYMBOL(memmove)
arch/x86/lib/memset_64.S +2 -2
index 564abf9ecedb..9ff15ee404a4 100644
@@ -20,7 +20,7 @@
  * rax   original destination
  */
 SYM_FUNC_START_ALIAS(memset)
-ENTRY(__memset)
+SYM_FUNC_START(__memset)
 	/*
 	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
 	 * to use it when possible. If not available, use fast string instructions.
@@ -43,7 +43,7 @@ ENTRY(__memset)
 	rep stosb
 	movq %r9,%rax
 	ret
-ENDPROC(__memset)
+SYM_FUNC_END(__memset)
 SYM_FUNC_END_ALIAS(memset)
 EXPORT_SYMBOL(memset)
 EXPORT_SYMBOL(__memset)
arch/x86/lib/msr-reg.S +4 -4
index ed33cbab3958..a2b9caa5274c 100644
@@ -12,7 +12,7 @@
  *
  */
 .macro op_safe_regs op
-ENTRY(\op\()_safe_regs)
+SYM_FUNC_START(\op\()_safe_regs)
 	pushq %rbx
 	pushq %r12
 	movq	%rdi, %r10	/* Save pointer */
@@ -41,13 +41,13 @@ ENTRY(\op\()_safe_regs)
 	jmp     2b
 
 	_ASM_EXTABLE(1b, 3b)
-ENDPROC(\op\()_safe_regs)
+SYM_FUNC_END(\op\()_safe_regs)
 .endm
 
 #else /* X86_32 */
 
 .macro op_safe_regs op
-ENTRY(\op\()_safe_regs)
+SYM_FUNC_START(\op\()_safe_regs)
 	pushl %ebx
 	pushl %ebp
 	pushl %esi
@@ -83,7 +83,7 @@ ENTRY(\op\()_safe_regs)
 	jmp     2b
 
 	_ASM_EXTABLE(1b, 3b)
-ENDPROC(\op\()_safe_regs)
+SYM_FUNC_END(\op\()_safe_regs)
 .endm
 
 #endif
arch/x86/lib/putuser.S +8 -8
index a9391d772c81..7c7c92db8497 100644
@@ -34,7 +34,7 @@
 #define ENTER	mov PER_CPU_VAR(current_task), %_ASM_BX
 
 .text
-ENTRY(__put_user_1)
+SYM_FUNC_START(__put_user_1)
 	ENTER
 	cmp TASK_addr_limit(%_ASM_BX),%_ASM_CX
 	jae .Lbad_put_user
@@ -43,10 +43,10 @@ ENTRY(__put_user_1)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-ENDPROC(__put_user_1)
+SYM_FUNC_END(__put_user_1)
 EXPORT_SYMBOL(__put_user_1)
 
-ENTRY(__put_user_2)
+SYM_FUNC_START(__put_user_2)
 	ENTER
 	mov TASK_addr_limit(%_ASM_BX),%_ASM_BX
 	sub $1,%_ASM_BX
@@ -57,10 +57,10 @@ ENTRY(__put_user_2)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-ENDPROC(__put_user_2)
+SYM_FUNC_END(__put_user_2)
 EXPORT_SYMBOL(__put_user_2)
 
-ENTRY(__put_user_4)
+SYM_FUNC_START(__put_user_4)
 	ENTER
 	mov TASK_addr_limit(%_ASM_BX),%_ASM_BX
 	sub $3,%_ASM_BX
@@ -71,10 +71,10 @@ ENTRY(__put_user_4)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-ENDPROC(__put_user_4)
+SYM_FUNC_END(__put_user_4)
 EXPORT_SYMBOL(__put_user_4)
 
-ENTRY(__put_user_8)
+SYM_FUNC_START(__put_user_8)
 	ENTER
 	mov TASK_addr_limit(%_ASM_BX),%_ASM_BX
 	sub $7,%_ASM_BX
@@ -88,7 +88,7 @@ ENTRY(__put_user_8)
 	xor %eax,%eax
 	ASM_CLAC
 	RET
-ENDPROC(__put_user_8)
+SYM_FUNC_END(__put_user_8)
 EXPORT_SYMBOL(__put_user_8)
 
 SYM_CODE_START_LOCAL(.Lbad_put_user_clac)
arch/x86/lib/retpoline.S +2 -2
index c909961e678a..363ec132df7e 100644
@@ -11,11 +11,11 @@
 .macro THUNK reg
 	.section .text.__x86.indirect_thunk
 
-ENTRY(__x86_indirect_thunk_\reg)
+SYM_FUNC_START(__x86_indirect_thunk_\reg)
 	CFI_STARTPROC
 	JMP_NOSPEC %\reg
 	CFI_ENDPROC
-ENDPROC(__x86_indirect_thunk_\reg)
+SYM_FUNC_END(__x86_indirect_thunk_\reg)
 .endm
 
 /*
arch/x86/mm/mem_encrypt_boot.S +4 -4
index 6d71481a1e70..106ead05bbe3 100644
@@ -16,7 +16,7 @@
 
 	.text
 	.code64
-ENTRY(sme_encrypt_execute)
+SYM_FUNC_START(sme_encrypt_execute)
 
 	/*
 	 * Entry parameters:
@@ -66,9 +66,9 @@ ENTRY(sme_encrypt_execute)
 	pop	%rbp
 
 	ret
-ENDPROC(sme_encrypt_execute)
+SYM_FUNC_END(sme_encrypt_execute)
 
-ENTRY(__enc_copy)
+SYM_FUNC_START(__enc_copy)
 /*
  * Routine used to encrypt memory in place.
  *   This routine must be run outside of the kernel proper since
@@ -153,4 +153,4 @@ ENTRY(__enc_copy)
 
 	ret
 .L__enc_copy_end:
-ENDPROC(__enc_copy)
+SYM_FUNC_END(__enc_copy)
arch/x86/platform/efi/efi_stub_64.S +2 -2
index 74628ec78f29..b1d2313fe3bf 100644
@@ -39,7 +39,7 @@
 	mov %rsi, %cr0;			\
 	mov (%rsp), %rsp
 
-ENTRY(efi_call)
+SYM_FUNC_START(efi_call)
 	pushq %rbp
 	movq %rsp, %rbp
 	SAVE_XMM
@@ -55,4 +55,4 @@ ENTRY(efi_call)
 	RESTORE_XMM
 	popq %rbp
 	ret
-ENDPROC(efi_call)
+SYM_FUNC_END(efi_call)
arch/x86/platform/efi/efi_thunk_64.S +2 -2
index d677a7eb2d0a..3189f1394701 100644
@@ -25,7 +25,7 @@
 
 	.text
 	.code64
-ENTRY(efi64_thunk)
+SYM_FUNC_START(efi64_thunk)
 	push	%rbp
 	push	%rbx
 
@@ -60,7 +60,7 @@ ENTRY(efi64_thunk)
 	pop	%rbx
 	pop	%rbp
 	retq
-ENDPROC(efi64_thunk)
+SYM_FUNC_END(efi64_thunk)
 
 /*
  * We run this function from the 1:1 mapping.
arch/x86/power/hibernate_asm_64.S +4 -4
index 4057cd5af7e2..7918b8415f13 100644
@@ -22,7 +22,7 @@
 #include <asm/processor-flags.h>
 #include <asm/frame.h>
 
-ENTRY(swsusp_arch_suspend)
+SYM_FUNC_START(swsusp_arch_suspend)
 	movq	$saved_context, %rax
 	movq	%rsp, pt_regs_sp(%rax)
 	movq	%rbp, pt_regs_bp(%rax)
@@ -50,7 +50,7 @@ ENTRY(swsusp_arch_suspend)
 	call swsusp_save
 	FRAME_END
 	ret
-ENDPROC(swsusp_arch_suspend)
+SYM_FUNC_END(swsusp_arch_suspend)
 
 SYM_CODE_START(restore_image)
 	/* prepare to jump to the image kernel */
@@ -102,7 +102,7 @@ SYM_CODE_END(core_restore_code)
 
 	 /* code below belongs to the image kernel */
 	.align PAGE_SIZE
-ENTRY(restore_registers)
+SYM_FUNC_START(restore_registers)
 	/* go back to the original page tables */
 	movq    %r9, %cr3
 
@@ -144,4 +144,4 @@ ENTRY(restore_registers)
 	movq	%rax, in_suspend(%rip)
 
 	ret
-ENDPROC(restore_registers)
+SYM_FUNC_END(restore_registers)
arch/x86/xen/xen-asm.S +14 -14
index be104eef80be..508fe204520b 100644
@@ -19,7 +19,7 @@
  * event status with one and operation.  If there are pending events,
  * then enter the hypervisor to get them handled.
  */
-ENTRY(xen_irq_enable_direct)
+SYM_FUNC_START(xen_irq_enable_direct)
 	FRAME_BEGIN
 	/* Unmask events */
 	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
@@ -38,17 +38,17 @@ ENTRY(xen_irq_enable_direct)
 1:
 	FRAME_END
 	ret
-	ENDPROC(xen_irq_enable_direct)
+SYM_FUNC_END(xen_irq_enable_direct)
 
 
 /*
  * Disabling events is simply a matter of making the event mask
  * non-zero.
  */
-ENTRY(xen_irq_disable_direct)
+SYM_FUNC_START(xen_irq_disable_direct)
 	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	ret
-ENDPROC(xen_irq_disable_direct)
+SYM_FUNC_END(xen_irq_disable_direct)
 
 /*
  * (xen_)save_fl is used to get the current interrupt enable status.
@@ -59,12 +59,12 @@ ENDPROC(xen_irq_disable_direct)
  * undefined.  We need to toggle the state of the bit, because Xen and
  * x86 use opposite senses (mask vs enable).
  */
-ENTRY(xen_save_fl_direct)
+SYM_FUNC_START(xen_save_fl_direct)
 	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	setz %ah
 	addb %ah, %ah
 	ret
-	ENDPROC(xen_save_fl_direct)
+SYM_FUNC_END(xen_save_fl_direct)
 
 
 /*
@@ -74,7 +74,7 @@ ENTRY(xen_save_fl_direct)
  * interrupt mask state, it checks for unmasked pending events and
  * enters the hypervisor to get them delivered if so.
  */
-ENTRY(xen_restore_fl_direct)
+SYM_FUNC_START(xen_restore_fl_direct)
 	FRAME_BEGIN
 #ifdef CONFIG_X86_64
 	testw $X86_EFLAGS_IF, %di
@@ -95,14 +95,14 @@ ENTRY(xen_restore_fl_direct)
 1:
 	FRAME_END
 	ret
-	ENDPROC(xen_restore_fl_direct)
+SYM_FUNC_END(xen_restore_fl_direct)
 
 
 /*
  * Force an event check by making a hypercall, but preserve regs
  * before making the call.
  */
-ENTRY(check_events)
+SYM_FUNC_START(check_events)
 	FRAME_BEGIN
 #ifdef CONFIG_X86_32
 	push %eax
@@ -135,19 +135,19 @@ ENTRY(check_events)
 #endif
 	FRAME_END
 	ret
-ENDPROC(check_events)
+SYM_FUNC_END(check_events)
 
-ENTRY(xen_read_cr2)
+SYM_FUNC_START(xen_read_cr2)
 	FRAME_BEGIN
 	_ASM_MOV PER_CPU_VAR(xen_vcpu), %_ASM_AX
 	_ASM_MOV XEN_vcpu_info_arch_cr2(%_ASM_AX), %_ASM_AX
 	FRAME_END
 	ret
-	ENDPROC(xen_read_cr2);
+SYM_FUNC_END(xen_read_cr2);
 
-ENTRY(xen_read_cr2_direct)
+SYM_FUNC_START(xen_read_cr2_direct)
 	FRAME_BEGIN
 	_ASM_MOV PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_arch_cr2, %_ASM_AX
 	FRAME_END
 	ret
-	ENDPROC(xen_read_cr2_direct);
+SYM_FUNC_END(xen_read_cr2_direct);
arch/x86/xen/xen-asm_64.S +8 -8
index 0060120f51dd..0a0fd168683a 100644
@@ -126,7 +126,7 @@ SYM_CODE_END(xen_sysret64)
  */
 
 /* Normal 64-bit system call target */
-ENTRY(xen_syscall_target)
+SYM_FUNC_START(xen_syscall_target)
 	popq %rcx
 	popq %r11
 
@@ -139,12 +139,12 @@ ENTRY(xen_syscall_target)
 	movq $__USER_CS, 1*8(%rsp)
 
 	jmp entry_SYSCALL_64_after_hwframe
-ENDPROC(xen_syscall_target)
+SYM_FUNC_END(xen_syscall_target)
 
 #ifdef CONFIG_IA32_EMULATION
 
 /* 32-bit compat syscall target */
-ENTRY(xen_syscall32_target)
+SYM_FUNC_START(xen_syscall32_target)
 	popq %rcx
 	popq %r11
 
@@ -157,25 +157,25 @@ ENTRY(xen_syscall32_target)
 	movq $__USER32_CS, 1*8(%rsp)
 
 	jmp entry_SYSCALL_compat_after_hwframe
-ENDPROC(xen_syscall32_target)
+SYM_FUNC_END(xen_syscall32_target)
 
 /* 32-bit compat sysenter target */
-ENTRY(xen_sysenter_target)
+SYM_FUNC_START(xen_sysenter_target)
 	mov 0*8(%rsp), %rcx
 	mov 1*8(%rsp), %r11
 	mov 5*8(%rsp), %rsp
 	jmp entry_SYSENTER_compat
-ENDPROC(xen_sysenter_target)
+SYM_FUNC_END(xen_sysenter_target)
 
 #else /* !CONFIG_IA32_EMULATION */
 
 SYM_FUNC_START_ALIAS(xen_syscall32_target)
-ENTRY(xen_sysenter_target)
+SYM_FUNC_START(xen_sysenter_target)
 	lea 16(%rsp), %rsp	/* strip %rcx, %r11 */
 	mov $-ENOSYS, %rax
 	pushq $0
 	jmp hypercall_iret
-ENDPROC(xen_sysenter_target)
+SYM_FUNC_END(xen_sysenter_target)
 SYM_FUNC_END_ALIAS(xen_syscall32_target)
 
 #endif	/* CONFIG_IA32_EMULATION */
include/linux/linkage.h +4 -0
index cb1108dde385..19f3d796ab5b 100644
@@ -114,11 +114,13 @@
 #endif
 #endif
 
+#ifndef CONFIG_X86_64
 #ifndef ENTRY
 /* deprecated, use SYM_FUNC_START */
 #define ENTRY(name) \
 	SYM_FUNC_START(name)
 #endif
+#endif /* CONFIG_X86_64 */
 #endif /* LINKER_SCRIPT */
 
 #ifndef WEAK
@@ -133,6 +135,7 @@
 	.size name, .-name
 #endif
 
+#ifndef CONFIG_X86_64
 /* If symbol 'name' is treated as a subroutine (gets called, and returns)
  * then please use ENDPROC to mark 'name' as STT_FUNC for the benefit of
  * static analysis tools such as stack depth analyzer.
@@ -142,6 +145,7 @@
 #define ENDPROC(name) \
 	SYM_FUNC_END(name)
 #endif
+#endif /* CONFIG_X86_64 */
 
 /* === generic annotations === */
 
Signature · 1 line
2.23.0
maintainer
#69 lore raw

Re: [PATCH v9 24/28] x86_64/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

Hi,

Quoted 62 lines · Jiri Slaby

These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START. And their ENDPROC's by SYM_FUNC_END.

And make sure ENTRY/ENDPROC is not defined on X86_64, given these were the last users.

Cc "H. Peter Anvin" <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Len Brown <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Matt Fleming <[email protected]>
Cc Ard Biesheuvel <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Juergen Gross <[email protected]>
---
 arch/x86/boot/compressed/efi_thunk_64.S      |  4 +-
 arch/x86/boot/compressed/head_64.S           | 16 +++---
 arch/x86/boot/compressed/mem_encrypt.S       |  8 +--
 arch/x86/crypto/aegis128-aesni-asm.S         | 28 ++++-----
 arch/x86/crypto/aes_ctrby8_avx-x86_64.S      | 12 ++--
 arch/x86/crypto/aesni-intel_asm.S            | 60 ++++++++++----------
 arch/x86/crypto/aesni-intel_avx-x86_64.S     | 32 +++++------
 arch/x86/crypto/blowfish-x86_64-asm_64.S     | 16 +++---
 arch/x86/crypto/camellia-aesni-avx-asm_64.S  | 24 ++++----
 arch/x86/crypto/camellia-aesni-avx2-asm_64.S | 24 ++++----
 arch/x86/crypto/camellia-x86_64-asm_64.S     | 16 +++---
 arch/x86/crypto/cast5-avx-x86_64-asm_64.S    | 16 +++---
 arch/x86/crypto/cast6-avx-x86_64-asm_64.S    | 24 ++++----
 arch/x86/crypto/chacha-avx2-x86_64.S         | 12 ++--
 arch/x86/crypto/chacha-avx512vl-x86_64.S     | 12 ++--
 arch/x86/crypto/chacha-ssse3-x86_64.S        | 12 ++--
 arch/x86/crypto/crc32-pclmul_asm.S           |  4 +-
 arch/x86/crypto/crc32c-pcl-intel-asm_64.S    |  4 +-
 arch/x86/crypto/crct10dif-pcl-asm_64.S       |  4 +-
 arch/x86/crypto/des3_ede-asm_64.S            |  8 +--
 arch/x86/crypto/ghash-clmulni-intel_asm.S    |  8 +--
 arch/x86/crypto/nh-avx2-x86_64.S             |  4 +-
 arch/x86/crypto/nh-sse2-x86_64.S             |  4 +-
 arch/x86/crypto/poly1305-avx2-x86_64.S       |  4 +-
 arch/x86/crypto/poly1305-sse2-x86_64.S       |  8 +--
 arch/x86/crypto/serpent-avx-x86_64-asm_64.S  | 24 ++++----
 arch/x86/crypto/serpent-avx2-asm_64.S        | 24 ++++----
 arch/x86/crypto/serpent-sse2-x86_64-asm_64.S |  8 +--
 arch/x86/crypto/sha1_avx2_x86_64_asm.S       |  4 +-
 arch/x86/crypto/sha1_ni_asm.S                |  4 +-
 arch/x86/crypto/sha1_ssse3_asm.S             |  4 +-
 arch/x86/crypto/sha256-avx-asm.S             |  4 +-
 arch/x86/crypto/sha256-avx2-asm.S            |  4 +-
Quoted 8 lines
 arch/x86/crypto/sha256-ssse3-asm.S           |  4 +-
 arch/x86/crypto/sha256_ni_asm.S              |  4 +-
 arch/x86/crypto/sha512-avx-asm.S             |  4 +-
 arch/x86/crypto/sha512-avx2-asm.S            |  4 +-
 arch/x86/crypto/sha512-ssse3-asm.S           |  4 +-
 arch/x86/crypto/twofish-avx-x86_64-asm_64.S  | 24 ++++----
 arch/x86/crypto/twofish-x86_64-asm_64-3way.S |  8 +--
 arch/x86/crypto/twofish-x86_64-asm_64.S      |  8 +--

I could use an ACK for the crypto bits...

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
maintainer Acked-by
#70 lore raw

Re: [PATCH v9 24/28] x86_64/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*

Quoted 74 lines · Borislav Petkov

Hi,

Quoted 62 lines · Jiri Slaby

These are all functions which are invoked from elsewhere, so annotate them as global using the new SYM_FUNC_START. And their ENDPROC's by SYM_FUNC_END.

And make sure ENTRY/ENDPROC is not defined on X86_64, given these were the last users.

Cc "H. Peter Anvin" <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Len Brown <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Matt Fleming <[email protected]>
Cc Ard Biesheuvel <[email protected]>
Cc Boris Ostrovsky <[email protected]>
Cc Juergen Gross <[email protected]>
---
 arch/x86/boot/compressed/efi_thunk_64.S      |  4 +-
 arch/x86/boot/compressed/head_64.S           | 16 +++---
 arch/x86/boot/compressed/mem_encrypt.S       |  8 +--
 arch/x86/crypto/aegis128-aesni-asm.S         | 28 ++++-----
 arch/x86/crypto/aes_ctrby8_avx-x86_64.S      | 12 ++--
 arch/x86/crypto/aesni-intel_asm.S            | 60 ++++++++++----------
 arch/x86/crypto/aesni-intel_avx-x86_64.S     | 32 +++++------
 arch/x86/crypto/blowfish-x86_64-asm_64.S     | 16 +++---
 arch/x86/crypto/camellia-aesni-avx-asm_64.S  | 24 ++++----
 arch/x86/crypto/camellia-aesni-avx2-asm_64.S | 24 ++++----
 arch/x86/crypto/camellia-x86_64-asm_64.S     | 16 +++---
 arch/x86/crypto/cast5-avx-x86_64-asm_64.S    | 16 +++---
 arch/x86/crypto/cast6-avx-x86_64-asm_64.S    | 24 ++++----
 arch/x86/crypto/chacha-avx2-x86_64.S         | 12 ++--
 arch/x86/crypto/chacha-avx512vl-x86_64.S     | 12 ++--
 arch/x86/crypto/chacha-ssse3-x86_64.S        | 12 ++--
 arch/x86/crypto/crc32-pclmul_asm.S           |  4 +-
 arch/x86/crypto/crc32c-pcl-intel-asm_64.S    |  4 +-
 arch/x86/crypto/crct10dif-pcl-asm_64.S       |  4 +-
 arch/x86/crypto/des3_ede-asm_64.S            |  8 +--
 arch/x86/crypto/ghash-clmulni-intel_asm.S    |  8 +--
 arch/x86/crypto/nh-avx2-x86_64.S             |  4 +-
 arch/x86/crypto/nh-sse2-x86_64.S             |  4 +-
 arch/x86/crypto/poly1305-avx2-x86_64.S       |  4 +-
 arch/x86/crypto/poly1305-sse2-x86_64.S       |  8 +--
 arch/x86/crypto/serpent-avx-x86_64-asm_64.S  | 24 ++++----
 arch/x86/crypto/serpent-avx2-asm_64.S        | 24 ++++----
 arch/x86/crypto/serpent-sse2-x86_64-asm_64.S |  8 +--
 arch/x86/crypto/sha1_avx2_x86_64_asm.S       |  4 +-
 arch/x86/crypto/sha1_ni_asm.S                |  4 +-
 arch/x86/crypto/sha1_ssse3_asm.S             |  4 +-
 arch/x86/crypto/sha256-avx-asm.S             |  4 +-
 arch/x86/crypto/sha256-avx2-asm.S            |  4 +-
Quoted 8 lines
 arch/x86/crypto/sha256-ssse3-asm.S           |  4 +-
 arch/x86/crypto/sha256_ni_asm.S              |  4 +-
 arch/x86/crypto/sha512-avx-asm.S             |  4 +-
 arch/x86/crypto/sha512-avx2-asm.S            |  4 +-
 arch/x86/crypto/sha512-ssse3-asm.S           |  4 +-
 arch/x86/crypto/twofish-avx-x86_64-asm_64.S  | 24 ++++----
 arch/x86/crypto/twofish-x86_64-asm_64-3way.S |  8 +--
 arch/x86/crypto/twofish-x86_64-asm_64.S      |  8 +--
Quoted 1 line

I could use an ACK for the crypto bits...

Cheers,

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt