dt-bindings: usb: Convert Allwinner A10 mUSB controller to a schema
Subsystems (3)
PATCH 1/1 dt-bindings: usb: Convert Allwinner A10 mUSB controller to a schema
The Allwinner SoCs have an mUSB controller that is supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
--- .../bindings/usb/allwinner,sun4i-a10-musb.txt | 28 ----- .../usb/allwinner,sun4i-a10-musb.yaml | 101 ++++++++++++++++++ 2 files changed, 101 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt deleted +0 -28
@@ -1,28 +0,0 @@ -Allwinner sun4i A10 musb DRC/OTG controller -------------------------------------------- - -Required properties: - - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb", - "allwinner,sun8i-a33-musb" or "allwinner,sun8i-h3-musb" - - reg : mmio address range of the musb controller - - clocks : clock specifier for the musb controller ahb gate clock - - reset : reset specifier for the ahb reset (A31 and newer only) - - interrupts : interrupt to which the musb controller is connected - - interrupt-names : must be "mc" - - phys : phy specifier for the otg phy - - phy-names : must be "usb" - - dr_mode : Dual-Role mode must be "host" or "otg" - - extcon : extcon specifier for the otg phy - -Example: - - usb_otg: usb@1c13000 { - compatible = "allwinner,sun4i-a10-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; - interrupts = <38>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - };
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml new file +101 -0
101 lines not on this page · raw message
Signature · 1 line
2.23.0
Rob Herring
maintainerQuoted 69 lines · Maxime Ripard
The Allwinner SoCs have an mUSB controller that is supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
Signed-off-by Maxime Ripard <[email protected]>--- .../bindings/usb/allwinner,sun4i-a10-musb.txt | 28 ----- .../usb/allwinner,sun4i-a10-musb.yaml | 101 ++++++++++++++++++ 2 files changed, 101 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yamlDocumentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt deleted +0
-28@@ -1,28 +0,0 @@ -Allwinner sun4i A10 musb DRC/OTG controller -------------------------------------------- - -Required properties: - - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb", - "allwinner,sun8i-a33-musb" or "allwinner,sun8i-h3-musb" - - reg : mmio address range of the musb controller - - clocks : clock specifier for the musb controller ahb gate clock - - reset : reset specifier for the ahb reset (A31 and newer only) - - interrupts : interrupt to which the musb controller is connected - - interrupt-names : must be "mc" - - phys : phy specifier for the otg phy - - phy-names : must be "usb" - - dr_mode : Dual-Role mode must be "host" or "otg" - - extcon : extcon specifier for the otg phy - -Example: - - usb_otg: usb@1c13000 { - compatible = "allwinner,sun4i-a10-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; - interrupts = <38>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - };Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml new file +15
-0@@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/allwinner,sun4i-a10-musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 mUSB OTG Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <[email protected]> + - Maxime Ripard <[email protected]> + +properties: + compatible: + oneOf:
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml line 25
Quoted 10 lines
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml new file +10
-0+ - const: allwinner,sun4i-a10-musb + - const: allwinner,sun6i-a31-musb + - const: allwinner,sun8i-a33-musb + - items: + - const: allwinner,sun8i-a83t-musb + - const: allwinner,sun8i-a33-musb + - const: allwinner,sun8i-h3-musb + - items: + - const: allwinner,sun50i-h6-musb + - const: allwinner,sun8i-a33-musb
This could be 2 oneOf entries instead. Or just combine the 2 2 items entries.
Quoted 20 lines
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml new file +20
-0+ + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: mc + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + phys: + description: PHY specifier for the OTG PHY + + phy-names:
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml line 55
Quoted 10 lines
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml new file +10
-0+ const: usb + + extcon: + description: Extcon specifier for the OTG PHY + + dr_mode: + enum: + - host + - otg + - peripheral
3rd definition I've seen in the past day...
Quoted 49 lines
Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml new file +46
-0+ + allwinner,sram: + description: Phandle to the device SRAM + $ref: /schemas/types.yaml#/definitions/phandle-array + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - phys + - phy-names + - dr_mode + - extcon + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-musb + - allwinner,sun8i-a33-musb + - allwinner,sun8i-h3-musb + +then: + required: + - resets + +additionalProperties: false + +examples: + - | + usb_otg: usb@1c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + dr_mode = "peripheral"; + }; + +...Signature · 1 line
2.23.0