net: add tulip (dec21143) driver
PATCH v3 1/1 net: add tulip (dec21143) driver
This adds the basic functionality to emulate a Tulip NIC.
Implemented are:
- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY
Not implemented, mostly because i had no OS using these functions:
- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion
Successfully tested with the following Operating Systems:
- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX
Message-Id: <[email protected]>
---
Changes in v3:
- fix whitespace
- fix format string in read/write functions
Changes in v2:
- changed tulip_desc_{read,write} to take a struct descriptor * and no longer use a single pci DMA write, instead write one struct member at a time.
- fix _tulip_receive function name
- fix reset function and provide tulip_qdev_reset() for dc->reset.
- no longer write registers in the default case in tulip_write()
- set .impl.min_access_size and .impl.max_access_size
MAINTAINERS | 6 + hw/net/Kconfig | 5 + hw/net/Makefile.objs | 1 + hw/net/trace-events | 14 + hw/net/tulip.c | 1029 ++++++++++++++++++++++++++++++++++++++ hw/net/tulip.h | 267 ++++++++++ include/hw/pci/pci_ids.h | 1 + 7 files changed, 1323 insertions(+) create mode 100644 hw/net/tulip.c create mode 100644 hw/net/tulip.h
MAINTAINERS +6 -0
@@ -1638,6 +1638,12 @@ M: Stefan Weil <[email protected]> S: Maintained F: hw/net/eepro100.c +tulip +M: Sven Schnelle <[email protected]> +S: Maintained +F: hw/net/tulip.c +F: hw/net/tulip.h + Generic Loader M: Alistair Francis <[email protected]> S: Maintained
hw/net/Kconfig +5 -0
@@ -24,6 +24,11 @@ config PCNET_PCI config PCNET_COMMON bool +config TULIP + bool + default y if PCI_DEVICES + depends on PCI + config E1000_PCI bool default y if PCI_DEVICES
hw/net/Makefile.objs +1 -0
@@ -13,6 +13,7 @@ common-obj-$(CONFIG_E1000E_PCI_EXPRESS) += e1000e.o e1000e_core.o e1000x_common. common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o common-obj-$(CONFIG_VMXNET3_PCI) += net_tx_pkt.o net_rx_pkt.o common-obj-$(CONFIG_VMXNET3_PCI) += vmxnet3.o +common-obj-$(CONFIG_TULIP) += tulip.o common-obj-$(CONFIG_SMC91C111) += smc91c111.o common-obj-$(CONFIG_LAN9118) += lan9118.o
hw/net/trace-events +14 -0
@@ -367,3 +367,17 @@ virtio_net_announce_notify(void) "" virtio_net_announce_timer(int round) "%d" virtio_net_handle_announce(int round) "%d" virtio_net_post_load_device(void) + +# tulip.c +tulip_reg_write(uint64_t addr, const char *name, int size, uint64_t val) "addr 0x%02"PRIx64" (%s) size %d value 0x%08"PRIx64 +tulip_reg_read(uint64_t addr, const char *name, int size, uint64_t val) "addr 0x%02"PRIx64" (%s) size %d value 0x%08"PRIx64 +tulip_receive(const uint8_t *buf, size_t len) "buf %p size %zu" +tulip_descriptor(const char *prefix, uint32_t addr, uint32_t status, uint32_t control, uint32_t len1, uint32_t len2, uint32_t buf1, uint32_t buf2) "%s 0x%08x: status 0x%08x control 0x%03x len1 %4d len2 %4d buf1 0x%08x buf2 0x%08x" +tulip_rx_state(const char *state) "RX %s" +tulip_tx_state(const char *state) "TX %s" +tulip_irq(uint32_t mask, uint32_t en, const char *state) "mask 0x%08x ie 0x%08x %s" +tulip_mii_write(int phy, int reg, uint16_t data) "phy 0x%x reg 0x%x data 0x%04x" +tulip_mii_read(int phy, int reg, uint16_t data) "phy 0x%x, reg 0x%x data 0x%04x" +tulip_reset(void) "" +tulip_setup_frame(void) "" +tulip_setup_filter(int n, uint8_t a, uint8_t b, uint8_t c, uint8_t d, uint8_t e, uint8_t f) "%d: %02x:%02x:%02x:%02x:%02x:%02x"
hw/net/tulip.c new file +1029 -0
1,029 lines not on this page · raw message
hw/net/tulip.h new file +267 -0
267 lines not on this page · raw message
include/hw/pci/pci_ids.h +1 -0
@@ -164,6 +164,7 @@#define PCI_DEVICE_ID_LSI_SAS0079 0x0079#define PCI_VENDOR_ID_DEC 0x1011 +#define PCI_DEVICE_ID_DEC_21143 0x0019#define PCI_DEVICE_ID_DEC_21154 0x0026#define PCI_VENDOR_ID_CIRRUS 0x1013
Signature · 1 line
2.23.0
Jason Wang
AppliedMAINTAINERS
Quoted 56 lines · Sven Schnelle
This adds the basic functionality to emulate a Tulip NIC.
Implemented are:
- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHYNot implemented, mostly because i had no OS using these functions:
- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversionSuccessfully tested with the following Operating Systems:
- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UXSigned-off-by Sven Schnelle<[email protected]>Message-Id:<[email protected]>
Reviewed-by Peter Maydell<[email protected]>---
Changes in v3:
- fix whitespace
- fix format string in read/write functionsChanges in v2:
- changed tulip_desc_{read,write} to take a struct descriptor * and no longer use a single pci DMA write, instead write one struct member at a time.
- fix_tulip_receivefunction name
- fix reset function and providetulip_qdev_reset()fordc->reset.
- no longer write registers in the default case intulip_write()
- set .impl.min_access_size and .impl.max_access_sizeMAINTAINERS | 6 + hw/net/Kconfig | 5 + hw/net/Makefile.objs | 1 + hw/net/trace-events | 14 + hw/net/tulip.c | 1029 ++++++++++++++++++++++++++++++++++++++ hw/net/tulip.h | 267 ++++++++++ include/hw/pci/pci_ids.h | 1 + 7 files changed, 1323 insertions(+)create mode 100644
hw/net/tulip.c
create mode 100644hw/net/tulip.hMAINTAINERS +0
-0
Applied.
Thanks