warp7: Remove CONFIG_SYS_FSL_ESDHC_ADDR
PATCH 1/2 warp7: Remove CONFIG_SYS_FSL_ESDHC_ADDR
warp7 uses the driver model and it retrieves the ESDHC base address from device tree.
Remove the unneeded CONFIG_SYS_FSL_ESDHC_ADDR definition.
--- include/configs/warp7.h | 1 - 1 file changed, 1 deletion(-)
include/configs/warp7.h +0 -1
@@ -17,7 +17,6 @@#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)/* MMC Config*/ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE #define CONFIG_SYS_MMC_IMG_LOAD_PART 1
Signature · 1 line
2.17.1
PATCH 2/2 warp7: Remove duplicate "mmc dev" command
The "mmc dev" command is being called twice.
Remove the extra call.
--- include/configs/warp7.h | 1 - 1 file changed, 1 deletion(-)
include/configs/warp7.h +0 -1
@@ -94,7 +94,6 @@ "fi;\0" \#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "run do_bootscript_hab;" \ "if run loadbootscript; then " \
Signature · 1 line
2.17.1
PATCH 2/2 warp7: Remove duplicate "mmc dev" command
Hi Fabio,
Le 23/10/2019 à 16:20, Fabio Estevam a écrit :
Quoted 15 lines
The "mmc dev" command is being called twice.
Remove the extra call.
Signed-off-by Fabio Estevam <[email protected]>--- include/configs/warp7.h | 1 - 1 file changed, 1 deletion(-)include/configs/warp7.h +0
-0
include/configs/warp7.h line 99
Quoted 7 lines
include/configs/warp7.h +0
-1@@ -94,7 +94,6 @@ "fi;\0" \#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "run do_bootscript_hab;" \ "if run loadbootscript; then " \
Thanks !
Signature · 3 lines
Pierre-Jean Texier Embedded Linux Engineer https://koncepto.io
PATCH 2/2 warp7: Remove duplicate "mmc dev" command
In reply to Fabio EstevamHi Fabio,
Le 23/10/2019 à 16:20, Fabio Estevam a écrit :
Quoted 14 lines
The "mmc dev" command is being called twice.
Remove the extra call.
Signed-off-by Fabio Estevam <[email protected]>--- include/configs/warp7.h | 1 - 1 file changed, 1 deletion(-)include/configs/warp7.h +0
-0
include/configs/warp7.h line 99
Quoted 7 lines
include/configs/warp7.h +0
-1@@ -94,7 +94,6 @@ "fi;\0" \#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "run do_bootscript_hab;" \ "if run loadbootscript; then " \
Best regards,
Joris Offouga
PATCH 1/2 warp7: Remove CONFIG_SYS_FSL_ESDHC_ADDR
In reply to Fabio EstevamHi Fabio,
Le 23/10/2019 à 16:20, Fabio Estevam a écrit :
Quoted 16 lines
warp7 uses the driver model and it retrieves the ESDHC base address from device tree.
Remove the unneeded
CONFIG_SYS_FSL_ESDHC_ADDRdefinition.Signed-off-by Fabio Estevam <[email protected]>--- include/configs/warp7.h | 1 - 1 file changed, 1 deletion(-)include/configs/warp7.h +0
-0
include/configs/warp7.h line 22
Quoted 7 lines
include/configs/warp7.h +0
-1@@ -17,7 +17,6 @@#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)/* MMC Config*/ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE #define CONFIG_SYS_MMC_IMG_LOAD_PART 1
Thanks !
Signature · 3 lines
Pierre-Jean Texier Embedded Linux Engineer https://koncepto.io
PATCH 1/2 warp7: Remove CONFIG_SYS_FSL_ESDHC_ADDR
In reply to Fabio EstevamHi Fabio,
Le 23/10/2019 à 16:20, Fabio Estevam a écrit :
Quoted 15 lines
warp7 uses the driver model and it retrieves the ESDHC base address from device tree.
Remove the unneeded
CONFIG_SYS_FSL_ESDHC_ADDRdefinition.Signed-off-by Fabio Estevam <[email protected]>--- include/configs/warp7.h | 1 - 1 file changed, 1 deletion(-)include/configs/warp7.h +0
-0
include/configs/warp7.h line 22
Quoted 7 lines
include/configs/warp7.h +0
-1@@ -17,7 +17,6 @@#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)/* MMC Config*/ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE #define CONFIG_SYS_MMC_IMG_LOAD_PART 1
Best regards,
Joris Offouga