package/libvirt: new package
PATCH v6 1/1 package/libvirt: new package
From: Carlos Santos <[email protected]>
Libvirt is collection of software that provides a convenient way to manage virtual machines and other virtualization functionality, such as storage and network interface management. These software pieces include an API library, a daemon (libvirtd), and a command line utility (virsh).
Thanks-to: DATACOM for providing hardware and software tools used to
develop and test this package.
https://www.datacom.com.br/en/produtos/network-appliance
---
Supersedes: https://patchwork.ozlabs.org/patch/1180588/
---
History:
v1: primitive package, for experimental purposes only v1->v2:
- Clarify dependence on !BR2_TOOLCHAIN_USES_MUSL
- Add run-time dependence on dnsmask
- Add dependence on eudev and libpciaccess when eudev is selected (thus detected by configure).v2->v3:
- Condition the use of libtirpc to !BR2_TOOLCHAIN_HAS_NATIVE_RPC
- Check for BR2_PACKAGE_HAS_UDEV instead of BR2_PACKAGE_EUDEVv3->v4:
- Fix version history :-).
- Add optional dependency on several packages (e.g. attr, libpcap), depending on wether they are selected or not, and explicitly disable features whose required packages are not selected. This is very important to prevent selection of features based on leaks from the host environment (e.g. finding /usr/bin/numad on the host machine).
- Enable the "interface" driver if either udev or netcf is available.
- Disable pm-utils support, since there is no package for Buildroot.
- Use either openssl or gnutls, if available.
- Run qemu as user "qemu", group "kvm", not as root.
- Add a LIBVIRT_USERS variable to create user "qemu" an group "kvm".
- Add a device table file to set the ownership and permissions of the libvirt directories under /etc, /run and /var.
- If udev is not available, add an init script to set the ownership and permissions of /dev/kvm to root:kvm and 0660; otherwise create a corresponding /etc/udev/rules.d/90-kvm.rules file.
- Enable support for systemd, if applicable; otherwise install an init script to start/stop/restart libvirtd.
- Ensure that a modern netcat is available.v4->v5:
- Changed SOB, since I don't work for DATACOM anymore.
- Bump to version 5.8.0.
- Add hash for license file.
- Drop OpenSSL options, since it's not supported anymore.
- Use https to access libvirt.org, since http is always redirected to https.
- Make libvirt daemon optional. If not selected, build only the client utilities. Reorganize run-time dependencies accordingly.
- Load all vfio modules on startup, if they exist, otherwise virtual machines that depend on the PCI Passthrough feature fail to load. vfio-pci is not enough. Other modules, like vfio_iommu_type1, may be necessary.
- Fix stopping dnsmasq in start/stop script. dnsmasq is not always started by libvirtd, so we must chech if it is running before attempting to stop it.
- Move /etc/libvirt/{qemu,secrets,storage} to /var/lib/libvirt. It may be necessary to create persistent files (e.g. VM definitions) in these directories. Move them to /var/lib because /etc may be on a read-only or volatile (initramfs) filesystem. We could tweak the code to change these paths but the patch would be large and would break compatibility with ordinary installations and with the documentation.
- Prevent an error message if pid file dissappears. start-stop-daemon sends a TERM signal to the process but does not wait for its termination, so we may reach rm_stale_pidfile while libvirtd.pid still exists but execute the cat command when the file is already gone, which leads cat to show an error message. We could use the '--retry' option to wait for the process termination but it is not supported by BusyBox. Let's just send the error messages to /dev/null and attempt to remove the file if any command fails, since 'rm -f' does nothing if the file does not exist.
- Move device table creation to LIBVIRT_DEVICES instead of using the device_table.txt file.
- Select libseccomp to enable seccomp support in qemu, as required by libvirt.
- Select hwdata (pci.ids). It is required by libvirt to show device names when we use virtual machine manager to add hardware via PCI passthrough, otherwise only the PCI bus information (slot, port, function) is shown.
- Add systemd support.
- Restrict to libvirt with udev support. Drop netcf usage, which requires a new package and is hard to test. Support for non-udev systems will be added later.
- Remove package/libvirt/S30devkvmperms
- Fine-tune the configuration and pass host/target executable paths in ac_cv_path_* variables via LIBVIRT_CONF_ENV.
- Use LIBVIRT_PERMISSIONS to set directory permissions.
- Drop hook to set user/group in /etc/libvirt/qemu.conf, since it's not necessary.
- Pull two upstream patches that fix building with musl.
- Do not check for executables existence in the startup script.
- Use separate init scripts for virtlogd and libvirtd. Make them compliant to the current pattern (as much as possible).
- Do not start/stop virtlockd, since it is controlled by libvirtd.v5->v6:
- Remove stray '\' in S91virtlogd
--- package/Config.in | 1 + .../0001-qemu-fix-build-with-musl-libc.patch | 80 ++++ ...002-storage-fix-build-with-musl-libc.patch | 52 +++ package/libvirt/90-kvm.rules | 1 + package/libvirt/Config.in | 110 +++++ package/libvirt/S91virtlogd | 65 +++ package/libvirt/S92libvirtd | 132 ++++++ package/libvirt/libvirt.hash | 3 + package/libvirt/libvirt.mk | 377 ++++++++++++++++++ 9 files changed, 821 insertions(+) create mode 100644 package/libvirt/0001-qemu-fix-build-with-musl-libc.patch create mode 100644 package/libvirt/0002-storage-fix-build-with-musl-libc.patch create mode 100644 package/libvirt/90-kvm.rules create mode 100644 package/libvirt/Config.in create mode 100644 package/libvirt/S91virtlogd create mode 100644 package/libvirt/S92libvirtd create mode 100644 package/libvirt/libvirt.hash create mode 100644 package/libvirt/libvirt.mk
package/Config.in +1 -0
@@ -2250,6 +2250,7 @@ menu "System tools" source "package/kmod/Config.in" source "package/kvmtool/Config.in" source "package/libostree/Config.in" + source "package/libvirt/Config.in" source "package/lxc/Config.in" source "package/mender/Config.in" source "package/mender-grubenv/Config.in"
package/libvirt/0001-qemu-fix-build-with-musl-libc.patch new file +80 -0
80 lines not on this page · raw message
package/libvirt/0002-storage-fix-build-with-musl-libc.patch new file +52 -0
52 lines not on this page · raw message
package/libvirt/90-kvm.rules new file +1 -0
@@ -0,0 +1 @@ +KERNEL=="kvm", OWNER="root", GROUP="kvm", MODE="0660"
package/libvirt/Config.in new file +110 -0
110 lines not on this page · raw message
package/libvirt/S91virtlogd new file +65 -0
65 lines not on this page · raw message
package/libvirt/S92libvirtd new file +132 -0
132 lines not on this page · raw message
package/libvirt/libvirt.hash new file +3 -0
@@ -0,0 +1,3 @@ +# locally computed +sha256 e23328289b18bdedc1e966f6c26402b2983149c660ed8bd52cda6feab0c20c55 libvirt-5.8.0.tar.xz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING
package/libvirt/libvirt.mk new file +377 -0
377 lines not on this page · raw message
Signature · 1 line
2.18.1
PATCH v6 1/1 package/libvirt: new package
Carlos,
Quoted 8 lines · On Thu, Oct 24, 2019 at 9:59 AM <[email protected]> wrote:
From: Carlos Santos <[email protected]>
Libvirt is collection of software that provides a convenient way to manage virtual machines and other virtualization functionality, such as storage and network interface management. These software pieces include an API library, a daemon (libvirtd), and a command line utility (virsh).
Quoted 6 lines
http://libvirt.org/Thanks-to: DATACOM for providing hardware and software tools used to
develop and test this package.
https://www.datacom.com.br/en/produtos/network-appliance
What's a good test approach to get you feedback on this series?
Quoted 998 lines
Signed-off-by Carlos Santos <[email protected]>---
Supersedes: https://patchwork.ozlabs.org/patch/1180588/
---
History:
v1: primitive package, for experimental purposes onlyv1->v2:
- Clarify dependence on !BR2_TOOLCHAIN_USES_MUSL
- Add run-time dependence on dnsmask
- Add dependence on eudev and libpciaccess when eudev is selected (thus detected by configure).v2->v3:
- Condition the use of libtirpc to !BR2_TOOLCHAIN_HAS_NATIVE_RPC
- Check forBR2_PACKAGE_HAS_UDEVinstead ofBR2_PACKAGE_EUDEVv3->v4:
- Fix version history :-).
- Add optional dependency on several packages (e.g. attr, libpcap), depending on wether they are selected or not, and explicitly disable features whose required packages are not selected. This is very important to prevent selection of features based on leaks from the host environment (e.g. finding/usr/bin/numadon the host machine).
- Enable the "interface" driver if either udev or netcf is available.
- Disable pm-utils support, since there is no package for Buildroot.
- Use either openssl or gnutls, if available.
- Run qemu as user "qemu", group "kvm", not as root.
- Add aLIBVIRT_USERSvariable to create user "qemu" an group "kvm".
- Add a device table file to set the ownership and permissions of the libvirt directories under /etc, /run and /var.
- If udev is not available, add an init script to set the ownership and permissions of/dev/kvmto root:kvm and 0660; otherwise create a corresponding/etc/udev/rules.d/90-kvm.rulesfile.
- Enable support for systemd, if applicable; otherwise install an init script to start/stop/restart libvirtd.
- Ensure that a modern netcat is available.v4->v5:
- Changed SOB, since I don't work for DATACOM anymore.
- Bump to version 5.8.0.
- Add hash for license file.
- Drop OpenSSL options, since it's not supported anymore.
- Use https to access libvirt.org, since http is always redirected to https.
- Make libvirt daemon optional. If not selected, build only the client utilities. Reorganize run-time dependencies accordingly.
- Load all vfio modules on startup, if they exist, otherwise virtual machines that depend on the PCI Passthrough feature fail to load. vfio-pci is not enough. Other modules, likevfio_iommu_type1, may be necessary.
- Fix stopping dnsmasq in start/stop script. dnsmasq is not always started by libvirtd, so we must chech if it is running before attempting to stop it.
- Move/etc/libvirt/{qemu,secrets,storage}to/var/lib/libvirt. It may be necessary to create persistent files (e.g. VM definitions) in these directories. Move them to/var/libbecause /etc may be on a read-only or volatile (initramfs) filesystem. We could tweak the code to change these paths but the patch would be large and would break compatibility with ordinary installations and with the documentation.
- Prevent an error message if pid file dissappears. start-stop-daemon sends a TERM signal to the process but does not wait for its termination, so we may reachrm_stale_pidfilewhile libvirtd.pid still exists but execute the cat command when the file is already gone, which leads cat to show an error message. We could use the '--retry' option to wait for the process termination but it is not supported by BusyBox. Let's just send the error messages to/dev/nulland attempt to remove the file if any command fails, since 'rm -f' does nothing if the file does not exist.
- Move device table creation toLIBVIRT_DEVICESinstead of using the device_table.txt file.
- Select libseccomp to enable seccomp support in qemu, as required by libvirt.
- Select hwdata (pci.ids). It is required by libvirt to show device names when we use virtual machine manager to add hardware via PCI passthrough, otherwise only the PCI bus information (slot, port, function) is shown.
- Add systemd support.
- Restrict to libvirt with udev support. Drop netcf usage, which requires a new package and is hard to test. Support for non-udev systems will be added later.
- Remove package/libvirt/S30devkvmperms
- Fine-tune the configuration and pass host/target executable paths in ac_cv_path_* variables viaLIBVIRT_CONF_ENV.
- UseLIBVIRT_PERMISSIONSto set directory permissions.
- Drop hook to set user/group in/etc/libvirt/qemu.conf, since it's not necessary.
- Pull two upstream patches that fix building with musl.
- Do not check for executables existence in the startup script.
- Use separate init scripts for virtlogd and libvirtd. Make them compliant to the current pattern (as much as possible).
- Do not start/stop virtlockd, since it is controlled by libvirtd.v5->v6:
- Remove stray '\' in S91virtlogd--- package/Config.in | 1 + .../0001-qemu-fix-build-with-musl-libc.patch | 80 ++++ ...002-storage-fix-build-with-musl-libc.patch | 52 +++ package/libvirt/90-kvm.rules | 1 + package/libvirt/Config.in | 110 +++++ package/libvirt/S91virtlogd | 65 +++ package/libvirt/S92libvirtd | 132 ++++++ package/libvirt/libvirt.hash | 3 + package/libvirt/libvirt.mk | 377 ++++++++++++++++++ 9 files changed, 821 insertions(+) create mode 100644 package/libvirt/0001-qemu-fix-build-with-musl-libc.patch create mode 100644 package/libvirt/0002-storage-fix-build-with-musl-libc.patch create mode 100644 package/libvirt/90-kvm.rules create mode 100644 package/libvirt/Config.in create mode 100644 package/libvirt/S91virtlogd create mode 100644 package/libvirt/S92libvirtd create mode 100644 package/libvirt/libvirt.hash create mode 100644 package/libvirt/libvirt.mkpackage/Config.in +1
-0@@ -2250,6 +2250,7 @@ menu "System tools" source "package/kmod/Config.in" source "package/kvmtool/Config.in" source "package/libostree/Config.in" + source "package/libvirt/Config.in" source "package/lxc/Config.in" source "package/mender/Config.in" source "package/mender-grubenv/Config.in"package/libvirt/0001-qemu-fix-build-with-musl-libc.patch new file +80
-0@@ -0,0 +1,80 @@ +From 44d63ad997216f05f5c7ce005acc308bbdd00458 Mon Sep 17 00:00:00 2001 +From: Carlos Santos <[email protected]> +Date: Wed, 16 Oct 2019 08:22:13 -0300 +Subject: [PATCH 1/2] qemu: fix build with musl libc + +On musl libc "stderr" is a preprocessor macro whose expansion leads to +compilation errors: + +In file included from qemu/qemu_process.c:66: +qemu/qemu_process.c: In function 'qemuProcessQMPFree': +qemu/qemu_process.c:8418:21: error: expected identifier before '(' token + VIR_FREE((proc->stderr)); + ^~~~~~ + +Prevent this by renaming the homonymous field in the _qemuProcessQMP +struct to "stdErr". + +Signed-off-by: Carlos Santos <[email protected]> +Reviewed-by: Michal Privoznik <[email protected]> +--- + src/qemu/qemu_process.c | 8 ++++---- + src/qemu/qemu_process.h | 2 +- + 2 files changed, 5 insertions(+), 5 deletions(-) + +diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c +index aaca2fc7d6..9eaea4edfd 100644 +--- a/src/qemu/qemu_process.c ++++ b/src/qemu/qemu_process.c +@@ -8445,7 +8445,7 @@ qemuProcessQMPFree(qemuProcessQMPPtr proc) + VIR_FREE(proc->monpath); + VIR_FREE(proc->monarg); + VIR_FREE(proc->pidfile); +- VIR_FREE(proc->stderr); ++ VIR_FREE(proc->stdErr); + VIR_FREE(proc); + } + +@@ -8598,7 +8598,7 @@ qemuProcessQMPLaunch(qemuProcessQMPPtr proc) + virCommandSetGID(proc->cmd, proc->runGid); + virCommandSetUID(proc->cmd, proc->runUid); + +- virCommandSetErrorBuffer(proc->cmd, &(proc->stderr)); ++ virCommandSetErrorBuffer(proc->cmd, &(proc->stdErr)); + + if (virCommandRun(proc->cmd, &status) < 0) + goto cleanup; +@@ -8608,7 +8608,7 @@ qemuProcessQMPLaunch(qemuProcessQMPPtr proc) + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Failed to start QEMU binary %s for probing: %s"), + proc->binary, +- proc->stderr ? proc->stderr : _("unknown error")); ++ proc->stdErr ? proc->stdErr : _("unknown error")); + goto cleanup; + } + +@@ -8687,7 +8687,7 @@ qemuProcessQMPConnectMonitor(qemuProcessQMPPtr proc) + * ** Send QMP Queries to QEMU using monitor (proc->mon) ** + * qemuProcessQMPFree(proc); + * +- * Process error output (proc->stderr) remains available in qemuProcessQMP ++ * Process error output (proc->stdErr) remains available in qemuProcessQMP + * struct until qemuProcessQMPFree is called. + */ + int +diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h +index 1d62319092..9af9f967fd 100644 +--- a/src/qemu/qemu_process.h ++++ b/src/qemu/qemu_process.h +@@ -212,7 +212,7 @@ struct _qemuProcessQMP { + char *libDir; + uid_t runUid; + gid_t runGid; +- char *stderr; ++ char *stdErr; + char *monarg; + char *monpath; + char *pidfile; +-- +2.18.1 +package/libvirt/0002-storage-fix-build-with-musl-libc.patch new file +52
-0@@ -0,0 +1,52 @@ +From 8e0c590c145b03b951f914f1442621f3d07c88ec Mon Sep 17 00:00:00 2001 +From: Carlos Santos <[email protected]> +Date: Wed, 16 Oct 2019 08:22:14 -0300 +Subject: [PATCH 2/2] storage: fix build with musl libc + +On musl _PATH_MOUNTED is defined in paths.h, not in mntent.h, which +causes compilation errors: + +storage/storage_backend_fs.c: In function 'virStorageBackendFileSystemIsMounted': +storage/storage_backend_fs.c:255:23: error: '_PATH_MOUNTED' undeclared (first use in this function); did you mean 'XPATH_POINT'? + if ((mtab = fopen(_PATH_MOUNTED, "r")) == NULL) { + ^~~~~~~~~~~~~ + XPATH_POINT + +Fix this including paths.h if _PATH_MOUNTED is still not defined after +including mntent.h. This also works with glibc and uClibc-ng. + +Signed-off-by: Carlos Santos <[email protected]> +Signed-off-by: Michal Privoznik <[email protected]> +Reviewed-by: Michal Privoznik <[email protected]> +--- + src/storage/storage_backend_fs.c | 1 + + src/storage/storage_backend_vstorage.c | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/src/storage/storage_backend_fs.c b/src/storage/storage_backend_fs.c +index d96f5a5cb5..ad993c656f 100644 +--- a/src/storage/storage_backend_fs.c ++++ b/src/storage/storage_backend_fs.c +@@ -42,6 +42,7 @@ VIR_LOG_INIT("storage.storage_backend_fs"); + #if WITH_STORAGE_FS + + # include <mntent.h> ++# include <paths.h> + + struct _virNetfsDiscoverState { + const char *host; +diff --git a/src/storage/storage_backend_vstorage.c b/src/storage/storage_backend_vstorage.c +index ef51f254a8..8a4023014d 100644 +--- a/src/storage/storage_backend_vstorage.c ++++ b/src/storage/storage_backend_vstorage.c +@@ -7,6 +7,7 @@ + #include "virlog.h" + #include "virstring.h" + #include <mntent.h> ++#include <paths.h> + #include <pwd.h> + #include <grp.h> + #include "storage_util.h" +-- +2.18.1 +package/libvirt/90-kvm.rules new file +1
-0@@ -0,0 +1 @@ +KERNEL=="kvm", OWNER="root", GROUP="kvm", MODE="0660"package/libvirt/Config.in new file +110
-0@@ -0,0 +1,110 @@ +config BR2_PACKAGE_LIBVIRT + bool "libvirt" + depends on BR2_USE_MMU # fork() + depends on BR2_aarch64 || BR2_i386 || BR2_x86_64 # dmidecode + depends on BR2_PACKAGE_HAS_UDEV + select BR2_PACKAGE_GNUTLS + select BR2_PACKAGE_LIBTIRPC if !BR2_TOOLCHAIN_HAS_NATIVE_RPC + # configure: You must install the pciaccess module to build with udev + select BR2_PACKAGE_LIBPCIACCESS + select BR2_PACKAGE_LIBXML2 + # run-time dependencies + select BR2_PACKAGE_CGROUPFS_MOUNT if !BR2_INIT_SYSTEMD + select BR2_PACKAGE_DMIDECODE + help + Libvirt is collection of software that provides a convenient + way to manage virtual machines and other virtualization + functionality, such as storage and network interface + management. These software pieces include an API library, a + daemon (libvirtd), and a command line utility (virsh). + + https://libvirt.org/ + +if BR2_PACKAGE_LIBVIRT + +# The daemon requires remote support. +config BR2_PACKAGE_LIBVIRT_DAEMON + bool "libvirtd" + default y + depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS + select BR2_PACKAGE_DNSMASQ + select BR2_PACKAGE_EBTABLES + select BR2_PACKAGE_IPTABLES + select BR2_PACKAGE_IPROUTE2 + # These are required because there is no way to unequivocally select a modern netcat + select BR2_PACKAGE_NMAP if !BR2_PACKAGE_NETCAT_OPENBSD + select BR2_PACKAGE_NMAP_NCAT if !BR2_PACKAGE_NETCAT_OPENBSD + select BR2_PACKAGE_RADVD + help + Build the libvirt daemon (libvirtd) otherwise build only the + utility programs. + +# Stateful drivers are useful only when building the daemon. +if BR2_PACKAGE_LIBVIRT_DAEMON + +config BR2_PACKAGE_LIBVIRT_QEMU + bool "qemu" + depends on BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS # libseccomp->qemu + depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 # libseccomp->qemu + depends on BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET + select BR2_PACKAGE_HWDATA # libpciaccess->qemu + select BR2_PACKAGE_HWDATA_PCI_IDS # libpciaccess->qemu + select BR2_PACKAGE_LIBSECCOMP + select BR2_PACKAGE_QEMU + select BR2_PACKAGE_QEMU_SYSTEM if BR2_PACKAGE_QEMU_CUSTOM_TARGETS = "" + select BR2_PACKAGE_YAJL + help + QEMU/KVM support + +comment "qemu is not supported on this architecture" + depends on !BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET \ + || !BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS + +comment "qemu support needs a toolchain w/ headers >= 3.12" + depends on BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET + depends on BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS + depends on !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 + +config BR2_PACKAGE_LIBVIRT_LXC + bool "lxc" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # lxc + select BR2_PACKAGE_LXC + help + Linux Container support + +comment "lxc needs a toolchain w/ threads, headers >= 3.0, dynamic library, gcc >= 4.7" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 + +endif + +comment "libvirtd needs 'nmap-ncat' or 'netcat-openbsd'" + depends on BR2_USE_MMU + depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS + +comment "libvirtd needs 'nmap-ncat' or 'netcat-openbsd' but netcat is selected" + depends on BR2_USE_MMU + depends on !BR2_STATIC_LIBS + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_PACKAGE_NETCAT + +endif + +comment "libvirt needs udev /dev management" + depends on BR2_USE_MMU + depends on !BR2_PACKAGE_HAS_UDEV + +comment "libvirt needs a toolchain w/ headers >= 3.12" + depends on BR2_USE_MMU + depends on BR2_PACKAGE_HAS_UDEV + depends on !BR2_PACKAGE_NETCAT + depends on !BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS || \ + !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 + +comment "libvirt needs a toolchain w/ threads, dynamic library" + depends on BR2_USE_MMU + depends on BR2_PACKAGE_HAS_UDEV + depends on !BR2_PACKAGE_NETCAT + depends on BR2_STATIC_LIBS || !BR2_USE_MMU || \ + !BR2_TOOLCHAIN_HAS_THREADSpackage/libvirt/S91virtlogd new file +65
-0@@ -0,0 +1,65 @@ +#!/bin/sh + +DAEMON="virtlogd" +EXECFILE="/usr/sbin/$DAEMON" +PIDFILE="/var/run/$DAEMON.pid" + +VIRTLOGD_ARGS="" + +# shellcheck source=/dev/null +[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON" + +start() { + printf 'Starting %s: ' "$DAEMON" + # shellcheck disable=SC2086 # we need the word splitting + start-stop-daemon -S -q -p "$PIDFILE" -x "$EXECFILE" \ + -- -d $VIRTLOGD_ARGS + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +stop() { + printf 'Stopping %s: ' "$DAEMON" + start-stop-daemon -K -q -p "$PIDFILE" -x "$EXECFILE" + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +restart() { + stop + sleep 1 + start +} + +# On receipt of SIGUSR1 virtlogd will re-exec() its binary, while maintaining +# all current logs and clients. This allows for live upgrades of the virtlogd +# service. +reload() { + printf 'Reloading %s: ' "$DAEMON" + start-stop-daemon -K -s USR1 -q -p "$PIDFILE" -x "$EXECFILE" + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +case "$1" in + start|stop|restart|reload) + "$1";; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 +esacpackage/libvirt/S92libvirtd new file +132
-0@@ -0,0 +1,132 @@ +#!/bin/sh + +DAEMON="libvirtd" +EXECFILE="/usr/sbin/$DAEMON" +PIDFILE="/var/run/$DAEMON.pid" + +LIBVIRTD_ARGS="" + +# shellcheck source=/dev/null +[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON" + +trap 'rm -f "$TMP_MODULE_LIST" "$TMP_PIDFILE_LIST"' EXIT + +is_alive() { + [ -e "$1" ] \ + && exe="/proc/$(cat "$1" 2>/dev/null)/exe" \ + && [ -s "$exe" ] \ + && [ "$(readlink -f "$exe")" = "$2" ] +} + +load_modules() { + printf 'Loading kernel modules: ' + kver="$(uname -r)" + TMP_MODULE_LIST="$(mktemp -q)" || { + echo 'FAIL creating temporary modules list' + exit 1 + } + [ -d "/lib/modules/$kver/kernel/drivers/net" ] && \ + find "/lib/modules/$kver/kernel/drivers/net" \ + -name "tun.ko*" >> "$TMP_MODULE_LIST" + [ -d "/lib/modules/$kver/kernel/drivers/vhost" ] && \ + find "/lib/modules/$kver/kernel/drivers/vhost" \ + -name "vhost?net.ko*" >> "$TMP_MODULE_LIST" + [ -d "/lib/modules/$kver/kernel/drivers/net" ] && \ + find "/lib/modules/$kver/kernel/drivers/vfio" \ + -name "*.ko*" >> "$TMP_MODULE_LIST" + while read -r f; do + m="$(basename "${f%.ko*}")" + if modprobe -q "$m"; then + printf '%s ' "$m" + else + echo "FAIL on $m" + exit 1 + fi + done < "$TMP_MODULE_LIST" + echo "OK" +} + +# +# If libvirtd dies it leves behind one stale dnsmasq per virtual network that +# must be killed before starting libvirtd again. +# +rm_stale_dnsmasq() { + [ -d /var/run/libvirt/network ] || return 0 + TMP_PIDFILE_LIST="$(mktemp -q)" || { + echo "Could not create temporary pidfile list" + exit 1 + } + find /var/run/libvirt/network -name '*.pid' > "$TMP_PIDFILE_LIST" + while read -r pidfile; do + if is_alive "$pidfile" /usr/sbin/dnsmasq; then + start-stop-daemon -K -q -p "$pidfile" -x /usr/sbin/dnsmasq + status=$? + if [ "$status" -ne 0 ]; then + echo "Could not stop stale dnsmasq daemons" + exit 1 + fi + rm -f "$pidfile" + fi + done < "$TMP_PIDFILE_LIST" +} + +start() { + if is_alive "$PIDFILE" "$EXECFILE"; then + # libvirtd is already running. Leave it alone. + printf 'Starting %s: FAIL\n' "$DAEMON" + return 1 + fi + rm_stale_dnsmasq + load_modules + printf 'Starting %s: ' "$DAEMON" + # shellcheck disable=SC2086 # we need the word splitting + start-stop-daemon -S -q -p "$PIDFILE" -x "$EXECFILE" \ + -- -d $LIBVIRTD_ARGS + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +stop() { + printf 'Stopping %s: ' "$DAEMON" + start-stop-daemon -K -q -p "$PIDFILE" -x "$EXECFILE" + status=$? + if [ "$status" -eq 0 ]; then + rm_stale_dnsmasq + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +restart() { + stop + sleep 1 + start +} + +# On receipt of SIGHUP libvirtd will reload its configuration. +reload() { + printf 'Reloading %s: ' "$DAEMON" + start-stop-daemon -K -s HUP -q -p "$PIDFILE" -x "$EXECFILE" + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +case "$1" in + start|stop|restart|reload) + "$1";; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 +esacpackage/libvirt/libvirt.hash new file +3
-0@@ -0,0 +1,3 @@ +# locally computed +sha256 e23328289b18bdedc1e966f6c26402b2983149c660ed8bd52cda6feab0c20c55 libvirt-5.8.0.tar.xz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYINGpackage/libvirt/libvirt.mk new file +377
-1@@ -0,0 +1,377 @@ +################################################################################ +# +# libvirt +# +################################################################################ + +LIBVIRT_VERSION = 5.8.0 +LIBVIRT_SITE = https://libvirt.org/sources +LIBVIRT_SOURCE = libvirt-$(LIBVIRT_VERSION).tar.xz +LIBVIRT_LICENSE = LGPL-2.1+ +LIBVIRT_LICENSE_FILES = COPYING +LIBVIRT_DEPENDENCIES = host-nfs-utils gnutls libxml2 udev + +LIBVIRT_CONF_ENV = \ + ac_cv_path_AUGPARSE=/dev/null \ + ac_cv_path_BRCTL=/usr/sbin/brctl \ + ac_cv_path_DMIDECODE=/usr/sbin/dmidecode \ + ac_cv_path_DMSETUP=/usr/sbin/dmsetup \ + ac_cv_path_DNSMASQ=/usr/sbin/dnsmasq \ + ac_cv_path_EBTABLES_PATH=/sbin/ebtables \ + ac_cv_path_IP_PATH=/sbin/ip + ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \ + ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \ + ac_cv_path_ISCSIADM=/usr/sbin/iscsiadm \ + ac_cv_path_LVCHANGE=/usr/sbin/lvchange \ + ac_cv_path_LVCREATE=/usr/sbin/lvcreate \ + ac_cv_path_LVREMOVE=/usr/sbin/lvremove \ + ac_cv_path_LVS=/usr/sbin/lvs \ + ac_cv_path_MKFS=/usr/sbin/mkfs \ + ac_cv_path_MODPROBE=/sbin/modprobe \ + ac_cv_path_MOUNT=/bin/mount \ + ac_cv_path_PARTED=/usr/sbin/parted \ + ac_cv_path_PKCHECK_PATH=/usr/bin/pkcheck \ + ac_cv_path_PVCREATE=/usr/sbin/pvcreate \ + ac_cv_path_PVREMOVE=/usr/sbin/pvremove \ + ac_cv_path_PVS=/usr/sbin/pvs \ + ac_cv_path_RADVD=/usr/sbin/radvd \ + ac_cv_path_RPCGEN=$(HOST_DIR)/bin/rpcgen \ + ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \ + ac_cv_path_TC=/sbin/tc \ + ac_cv_path_UDEVADM=/sbin/udevadm \ + ac_cv_path_UMOUNT=/bin/umount \ + ac_cv_path_VGCHANGE=/usr/sbin/vgchange \ + ac_cv_path_VGCREATE=/usr/sbin/vgcreate \ + ac_cv_path_VGREMOVE=/usr/sbin/vgremove \ + ac_cv_path_VGS=/usr/sbin/vgs \ + ac_cv_path_VGSCAN=/usr/sbin/vgscan \ + ac_cv_path_XMLCATLOG=$(HOST_DIR)/bin/xmlcatalog \ + ac_cv_path_XMLLINT=$(HOST_DIR)/bin/xmllint \ + as_ln_s="ln -s" + +LIBVIRT_CONF_OPTS = \ + --disable-rpath \ + --without-apparmor \ + $(if $(BR2_PACKAGE_BASH_COMPLETION),--with,--without)-bash-completion \ + --without-bhyve \ + --without-dtrace \ + --without-esx \ + --without-firewalld \ + --without-firewalld-zone \ + --without-glusterfs \ + --without-hal \ + --with-host-validate \ + --without-hyperv \ + --with-init-script=$(if $(BR2_INIT_SYSTEMD),systemd,none) \ + --with-interface \ + --without-libxl \ + --without-login-shell \ + --without-netcf \ + --without-numad \ + --without-openwsman \ + --without-openvz \ + --without-phyp \ + --without-pm-utils \ + --with-remote \ + --without-sanlock \ + --without-secdriver-apparmor \ + --with-secrets \ + --without-storage-mpath \ + --without-storage-iscsi \ + --without-storage-iscsi-direct \ + --with-sysctl \ + --without-test-suite \ + --with-udev \ + --without-vmware \ + --without-vbox \ + --without-vz \ + --without-wireshark-dissector + +ifeq ($(BR2_PACKAGE_ATTR),y) +LIBVIRT_CONF_OPTS += --with-attr +LIBVIRT_DEPENDENCIES += attr +else +LIBVIRT_CONF_OPTS += --without-attr +endif + +ifeq ($(BR2_PACKAGE_AUDIT),y) +LIBVIRT_CONF_OPTS += --with-audit +LIBVIRT_DEPENDENCIES += audit +else +LIBVIRT_CONF_OPTS += --without-audit +endif + +ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),y) +LIBVIRT_CONF_OPTS += --with-blkid +LIBVIRT_DEPENDENCIES += util-linux +else +LIBVIRT_CONF_OPTS += --without-blkid +endif + +ifeq ($(BR2_PACKAGE_LIBCAP_NG),y) +LIBVIRT_CONF_OPTS += --with-capng +LIBVIRT_DEPENDENCIES += libcap-ng +else +LIBVIRT_CONF_OPTS += --without-capng +endif + +ifeq ($(BR2_PACKAGE_LIBCURL),y) +LIBVIRT_CONF_OPTS += --with-curl +LIBVIRT_DEPENDENCIES += libcurl +else +LIBVIRT_CONF_OPTS += --without-curl +endif + +ifeq ($(BR2_PACKAGE_DBUS),y) +LIBVIRT_CONF_OPTS += --with-dbus +LIBVIRT_DEPENDENCIES += dbus +else +LIBVIRT_CONF_OPTS += --without-dbus +endif + +ifeq ($(BR2_PACKAGE_LIBFUSE),y) +LIBVIRT_CONF_OPTS += --with-fuse +LIBVIRT_DEPENDENCIES += libfuse +else +LIBVIRT_CONF_OPTS += --without-fuse +endif + +ifeq ($(BR2_PACKAGE_LIBISCSI),y) +LIBVIRT_CONF_OPTS += --with-libiscsi +LIBVIRT_DEPENDENCIES += libiscsi +else +LIBVIRT_CONF_OPTS += --without-libiscsi +endif + +# configure needs some help to find pcap-config at $(STAGING_DIR)/usr/bin +ifeq ($(BR2_PACKAGE_LIBPCAP),y) +LIBVIRT_CONF_OPTS += --with-libpcap=$(STAGING_DIR)/usr +LIBVIRT_DEPENDENCIES += libpcap +else +LIBVIRT_CONF_OPTS += --without-libpcap +endif + +ifeq ($(BR2_PACKAGE_LIBVIRT_DAEMON)$(BR2_PACKAGE_LIBSSH),yy) +LIBVIRT_CONF_OPTS += --with-libssh +LIBVIRT_DEPENDENCIES += libssh +else +LIBVIRT_CONF_OPTS += --without-libssh +endif + +# Network is used by daemon, only +ifeq ($(BR2_PACKAGE_LIBVIRT_DAEMON),y) +LIBVIRT_CONF_OPTS += --with-libvirtd --with-network +else +LIBVIRT_CONF_OPTS += --without-libvirtd --without-network +endif + +ifeq ($(BR2_PACKAGE_LIBVIRT_LXC),y) +LIBVIRT_CONF_OPTS += --with-login-shell --with-lxc +LIBVIRT_DEPENDENCIES += lxc +else +LIBVIRT_CONF_OPTS += --without-login-shell --without-lxc +endif + +# libnl >= 1.1 is required for macvtap support +# virtualport requires macvtap +ifeq ($(BR2_PACKAGE_LIBNL),y) +LIBVIRT_CONF_OPTS += --with-macvtap=yes --with-virtualport +LIBVIRT_DEPENDENCIES += libnl +else +LIBVIRT_CONF_ENV += ac_cv_have_decl_DEVLINK_CMD_ESWITCH_GET=no +LIBVIRT_CONF_OPTS += --with-macvtap=no --without-virtualport +endif + +# Can't build nss plugin without network +ifeq ($(BR2_PACKAGE_LIBVIRT_DAEMON)$(BR2_PACKAGE_LIBNSS),yy) +LIBVIRT_CONF_OPTS += --with-nss-plugin +LIBVIRT_DEPENDENCIES += libnss +else +LIBVIRT_CONF_OPTS += --without-nss-plugin +endif + +ifeq ($(BR2_PACKAGE_NUMACTL),y) +LIBVIRT_CONF_OPTS += --with-numactl +LIBVIRT_DEPENDENCIES += numactl +else +LIBVIRT_CONF_OPTS += --without-numactl +endif + +ifeq ($(BR2_PACKAGE_LIBPCIACCESS),y) +LIBVIRT_CONF_OPTS += --with-pciaccess +LIBVIRT_DEPENDENCIES += libpciaccess +else +LIBVIRT_CONF_OPTS += --without-pciaccess +endif + +ifeq ($(BR2_PACKAGE_POLKIT),y) +LIBVIRT_CONF_OPTS += --with-polkit +LIBVIRT_DEPENDENCIES += polkit +else +LIBVIRT_CONF_OPTS += --without-polkit +endif + +ifeq ($(BR2_PACKAGE_LIBVIRT_QEMU),y) +LIBVIRT_CONF_ENV += \ + ac_cv_path_QEMU_BRIDGE_HELPER=/usr/libexec/qemu-bridge-helper \ + ac_cv_path_QEMU_PR_HELPER=/usr/bin/qemu-pr-helper +LIBVIRT_CONF_OPTS += --with-qemu --with-qemu-user=qemu --with-qemu-group=kvm +else +LIBVIRT_CONF_OPTS += --without-qemu --with-qemu-user=no --with-qemu-group=no +endif + +ifeq ($(BR2_PACKAGE_READLINE),y) +LIBVIRT_CONF_OPTS += --with-readline +LIBVIRT_DEPENDENCIES += readline +else +LIBVIRT_CONF_OPTS += --without-readline +endif + +ifeq ($(BR2_PACKAGE_LIBVIRT_DAEMON)$(BR2_PACKAGE_LIBGSASL),yy) +LIBVIRT_CONF_OPTS += --with-sasl +LIBVIRT_DEPENDENCIES += libgsasl +else +LIBVIRT_CONF_OPTS += --without-sasl +endif + +ifeq ($(BR2_PACKAGE_LIBSELINUX),y) +LIBVIRT_CONF_OPTS += --with-selinux --with-secdriver-selinux +LIBVIRT_DEPENDENCIES += libselinux +else +LIBVIRT_CONF_OPTS += --without-selinux --with-selinux-mount=/sys/fs/selinux \ + --without-secdriver-selinux +endif + +ifeq ($(BR2_PACKAGE_LIBTIRPC),y) +LIBVIRT_DEPENDENCIES += libtirpc host-pkgconf +LIBVIRT_CONF_ENV += \ + CFLAGS="$(TARGET_CFLAGS) `$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc`" \ + LIBS="`$(PKG_CONFIG_HOST_BINARY) --libs libtirpc`" +endif + +ifeq ($(BR2_PACKAGE_LIBVIRT_DAEMON)$(BR2_PACKAGE_LIBSSH2),yy) +LIBVIRT_CONF_OPTS += --with-ssh2 +LIBVIRT_DEPENDENCIES += libssh2 +else +LIBVIRT_CONF_OPTS += --without-ssh2 +endif + +ifeq ($(BR2_PACKAGE_LVM2),y) +LIBVIRT_CONF_OPTS += --with-storage-lvm +LIBVIRT_DEPENDENCIES += lvm2 +else +LIBVIRT_CONF_OPTS += --without-storage-lvm +endif + +ifeq ($(BR2_PACKAGE_YAJL),y) +LIBVIRT_CONF_OPTS += --with-yajl +LIBVIRT_DEPENDENCIES += yajl +else +LIBVIRT_CONF_OPTS += --without-yajl +endif + +define LIBVIRT_INSTALL_UDEV_RULES + $(INSTALL) -D -m 644 package/libvirt/90-kvm.rules \ + $(TARGET_DIR)/etc/udev/rules.d/90-kvm.rules +endef +LIBVIRT_POST_INSTALL_TARGET_HOOKS += LIBVIRT_INSTALL_UDEV_RULES + +define LIBVIRT_FIX_PO_MAKEFILE_IN_IN + test ! -f $(@D)/po/Makefile.in.in || \ + $(SED) 's/GETTEXT_MACRO_VERSION = 0.17/GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@/' \ + $(@D)/po/Makefile.in.in +endef + +LIBVIRT_PRE_PATCH_HOOKS += LIBVIRT_FIX_PO_MAKEFILE_IN_IN + +# Adjust diretory ownerships and permissions. Notice /var/log is a symlink to +# /tmp in the default sysvinit skeleton, so some directories may disappear at +# run-time. Set the permissions anyway, since they are valid for the default +# systemd skeleton. +define LIBVIRT_PERMISSIONS + /etc/libvirt d 700 root root - - - - - + /etc/libvirt/nwfilter d 700 root root - - - - - + /var/lib/libvirt d 755 root root - - - - - + /var/lib/libvirt/boot d 711 root root - - - - - + /var/lib/libvirt/dnsmasq d 755 root root - - - - - + /var/lib/libvirt/filesystems d 711 root root - - - - - + /var/lib/libvirt/images d 711 root root - - - - - + /var/lib/libvirt/network d 700 root root - - - - - + /var/lib/libvirt/qemu d 751 qemu kvm - - - - - + /var/lib/libvirt/qemu/autostart d 700 root root - - - - - + /var/lib/libvirt/qemu/networks d 700 root root - - - - - + /var/lib/libvirt/qemu/networks/autostart d 700 root root - - - - - + /var/lib/libvirt/qemu/channel d 755 qemu kvm - - - - - + /var/lib/libvirt/qemu/channel/target d 755 qemu kvm - - - - - + /var/lib/libvirt/qemu/dump d 755 qemu kvm - - - - - + /var/lib/libvirt/qemu/nvram d 755 qemu kvm - - - - - + /var/lib/libvirt/qemu/save d 755 qemu kvm - - - - - + /var/lib/libvirt/qemu/snapshot d 755 qemu kvm - - - - - + /var/lib/libvirt/secrets d 700 root root - - - - - + /var/lib/libvirt/storage d 755 root root - - - - - + /var/lib/libvirt/storage/autostart d 755 root root - - - - - + /var/cache/libvirt d 711 root root - - - - - + /var/cache/libvirt/lxc d 750 root root - - - - - + /var/cache/libvirt/qemu d 750 qemu kvm - - - - - + /var/cache/libvirt/qemu/capabilities d 755 root root - - - - - + /var/log/libvirt d 700 root root - - - - - + /var/log/libvirt/lxc d 750 root root - - - - - + /var/log/libvirt/qemu d 750 root root - - - - - + /var/log/swtpm d 755 root root - - - - - + /var/log/swtpm/libvirt d 755 root root - - - - - + /var/log/swtpm/libvirt/qemu d 711 root root - - - - - +endef + +# libvirt may need to create persistent files (e.g. VM definitions) in these +# directories. Move them to /var/lib because /etc may be on a read-only or +# volatile (initramfs) filesystem. We could tweak the code to change these +# paths but the patch would be large and would break compatibility with +# ordinary installations and with the documentation. +define LIBVIRT_CREATE_SYMLINKS + $(INSTALL) -m 700 -d $(TARGET_DIR)/etc/libvirt + $(INSTALL) -m 755 -d $(TARGET_DIR)/var/lib/libvirt + $(INSTALL) -m 751 -d $(TARGET_DIR)/var/lib/libvirt/qemu + $(INSTALL) -m 700 -d $(TARGET_DIR)/var/lib/libvirt/secrets + $(INSTALL) -m 755 -d $(TARGET_DIR)/var/lib/libvirt/storage + ln -s -f ../../var/lib/libvirt/qemu $(TARGET_DIR)/etc/libvirt/ + ln -s -f ../../var/lib/libvirt/secrets $(TARGET_DIR)/etc/libvirt/ + ln -s -f ../../var/lib/libvirt/storage $(TARGET_DIR)/etc/libvirt/ +endef + +LIBVIRT_PRE_INSTALL_TARGET_HOOKS += LIBVIRT_CREATE_SYMLINKS + +# Remove directories that conflict with the default skeleton. They will be +# created by the daemon at run-time. +define LIBVIRT_PURGE_TMPDIR + rm -rf $(TARGET_DIR)/var/{cache,log,run}/libvirt +endef + +LIBVIRT_POST_INSTALL_TARGET_HOOKS += LIBVIRT_PURGE_TMPDIR + +ifeq ($(BR2_PACKAGE_LIBVIRT_QEMU),y) +define LIBVIRT_USERS + qemu -1 kvm -1 * - - - Libvirt qemu/kvm daemon +endef +endif + +ifeq ($(BR2_PACKAGE_LIBVIRT_DAEMON),y) +define LIBVIRT_INSTALL_INIT_SYSV + $(INSTALL) -m 755 -d $(TARGET_DIR)/etc/init.d + $(INSTALL) -m 755 -t $(TARGET_DIR)/etc/init.d \ + package/libvirt/S91virtlogd \ + package/libvirt/S92libvirtd +endef +define LIBVIRT_INSTALL_INIT_SYSTEMD + $(INSTALL) -m 755 -d $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants + ln -s -f ../../../../usr/lib/systemd/system/libvirtd.service \ + $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants/libvirtd.service + $(INSTALL) -m 755 -d $(TARGET_DIR)/etc/systemd/system/sockets.target.wants + ln -s -f ../../../../usr/lib/systemd/system/virtlockd.socket \ + ../../../../usr/lib/systemd/system/virtlogd.socket \ + ../../../../usr/lib/systemd/system/libvirtd.socket \ + ../../../../usr/lib/systemd/system/libvirtd-ro.socket \ + $(TARGET_DIR)/etc/systemd/system/sockets.target.wants +endef +endif + +$(eval $(autotools-package)) --2.18.1
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 23 lines
Matthew Weber | Associate Director Software Engineer | Commercial Avionics COLLINS AEROSPACE 400 Collins Road NE, Cedar Rapids, Iowa 52498, USA Tel: +1 319 295 7349 | FAX: +1 319 263 6099 matthew.weber at collins.com | collinsaerospace.com CONFIDENTIALITY WARNING: This message may contain proprietary and/or privileged information of Collins Aerospace and its affiliated companies. If you are not the intended recipient, please 1) Do not disclose, copy, distribute or use this message or its contents. 2) Advise the sender by return email. 3) Delete all copies (including all attachments) from your computer. Your cooperation is greatly appreciated. Any export restricted material should be shared using my matthew.weber at corp.rockwellcollins.com address.
PATCH v6 1/1 package/libvirt: new package
Quoted 12 lines · Matthew Weber
Carlos,
Quoted 8 lines · On Thu, Oct 24, 2019 at 9:59 AM <[email protected]> wrote:
From: Carlos Santos <[email protected]>
Libvirt is collection of software that provides a convenient way to manage virtual machines and other virtualization functionality, such as storage and network interface management. These software pieces include an API library, a daemon (libvirtd), and a command line utility (virsh).
Quoted 9 lines
Quoted 6 lines
http://libvirt.org/Thanks-to: DATACOM for providing hardware and software tools used to
develop and test this package.
https://www.datacom.com.br/en/produtos/network-applianceWhat's a good test approach to get you feedback on this series?
I will send a patch that creates a test vm image and contains and instructions to use it to test libvirt.
Signature · 1 line
Carlos Santos <[email protected]>
PATCH v6 1/1 package/libvirt: new package
In reply to unixmania at gmail.comCarlos,
Replying on behalf of Jared Bents <[email protected]>:
Quoted 18 lines · On Thu, Oct 24, 2019 at 9:59 AM <[email protected]> wrote:
From: Carlos Santos <[email protected]>
Libvirt is collection of software that provides a convenient way to manage virtual machines and other virtualization functionality, such as storage and network interface management. These software pieces include an API library, a daemon (libvirtd), and a command line utility (virsh).
http://libvirt.org/Thanks-to: DATACOM for providing hardware and software tools used to
develop and test this package.
https://www.datacom.com.br/en/produtos/network-applianceSigned-off-by Carlos Santos <[email protected]>---
Supersedes: https://patchwork.ozlabs.org/patch/1180588/
---
[...]
Quoted 60 lines
package/libvirt/libvirt.hash new file +3
-0@@ -0,0 +1,3 @@ +# locally computed +sha256 e23328289b18bdedc1e966f6c26402b2983149c660ed8bd52cda6feab0c20c55 libvirt-5.8.0.tar.xz +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYINGpackage/libvirt/libvirt.mk new file +45
-0@@ -0,0 +1,377 @@ +################################################################################ +# +# libvirt +# +################################################################################ + +LIBVIRT_VERSION = 5.8.0 +LIBVIRT_SITE = https://libvirt.org/sources +LIBVIRT_SOURCE = libvirt-$(LIBVIRT_VERSION).tar.xz +LIBVIRT_LICENSE = LGPL-2.1+ +LIBVIRT_LICENSE_FILES = COPYING +LIBVIRT_DEPENDENCIES = host-nfs-utils gnutls libxml2 udev + +LIBVIRT_CONF_ENV = \ + ac_cv_path_AUGPARSE=/dev/null \ + ac_cv_path_BRCTL=/usr/sbin/brctl \ + ac_cv_path_DMIDECODE=/usr/sbin/dmidecode \ + ac_cv_path_DMSETUP=/usr/sbin/dmsetup \ + ac_cv_path_DNSMASQ=/usr/sbin/dnsmasq \ + ac_cv_path_EBTABLES_PATH=/sbin/ebtables \ + ac_cv_path_IP_PATH=/sbin/ip + ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \ + ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \ + ac_cv_path_ISCSIADM=/usr/sbin/iscsiadm \ + ac_cv_path_LVCHANGE=/usr/sbin/lvchange \ + ac_cv_path_LVCREATE=/usr/sbin/lvcreate \ + ac_cv_path_LVREMOVE=/usr/sbin/lvremove \ + ac_cv_path_LVS=/usr/sbin/lvs \ + ac_cv_path_MKFS=/usr/sbin/mkfs \ + ac_cv_path_MODPROBE=/sbin/modprobe \ + ac_cv_path_MOUNT=/bin/mount \ + ac_cv_path_PARTED=/usr/sbin/parted \ + ac_cv_path_PKCHECK_PATH=/usr/bin/pkcheck \ + ac_cv_path_PVCREATE=/usr/sbin/pvcreate \ + ac_cv_path_PVREMOVE=/usr/sbin/pvremove \ + ac_cv_path_PVS=/usr/sbin/pvs \ + ac_cv_path_RADVD=/usr/sbin/radvd \ + ac_cv_path_RPCGEN=$(HOST_DIR)/bin/rpcgen \ + ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \ + ac_cv_path_TC=/sbin/tc \ + ac_cv_path_UDEVADM=/sbin/udevadm \ + ac_cv_path_UMOUNT=/bin/umount \ + ac_cv_path_VGCHANGE=/usr/sbin/vgchange \ + ac_cv_path_VGCREATE=/usr/sbin/vgcreate \ + ac_cv_path_VGREMOVE=/usr/sbin/vgremove \
package/libvirt/libvirt.mk line 55
Quoted 10 lines
package/libvirt/libvirt.mk new file +10
-0+ ac_cv_path_VGS=/usr/sbin/vgs \ + ac_cv_path_VGSCAN=/usr/sbin/vgscan \ + ac_cv_path_XMLCATLOG=$(HOST_DIR)/bin/xmlcatalog \ + ac_cv_path_XMLLINT=$(HOST_DIR)/bin/xmllint \ + as_ln_s="ln -s" + +LIBVIRT_CONF_OPTS = \ + --disable-rpath \ + --without-apparmor \ + $(if $(BR2_PACKAGE_BASH_COMPLETION),--with,--without)-bash-completion \
--with-bash-completion needs to add a dependency on bash-completion. This should be removed
from here and added down below similarly to how BR2_PACKAGE_AUDIT was handled.
Quoted 37 lines
package/libvirt/libvirt.mk new file +37
-0+ --without-bhyve \ + --without-dtrace \ + --without-esx \ + --without-firewalld \ + --without-firewalld-zone \ + --without-glusterfs \ + --without-hal \ + --with-host-validate \ + --without-hyperv \ + --with-init-script=$(if $(BR2_INIT_SYSTEMD),systemd,none) \ + --with-interface \ + --without-libxl \ + --without-login-shell \ + --without-netcf \ + --without-numad \ + --without-openwsman \ + --without-openvz \ + --without-phyp \ + --without-pm-utils \ + --with-remote \ + --without-sanlock \ + --without-secdriver-apparmor \ + --with-secrets \ + --without-storage-mpath \ + --without-storage-iscsi \ + --without-storage-iscsi-direct \ + --with-sysctl \ + --without-test-suite \ + --with-udev \ + --without-vmware \ + --without-vbox \ + --without-vz \ + --without-wireshark-dissector + +ifeq ($(BR2_PACKAGE_ATTR),y) +LIBVIRT_CONF_OPTS += --with-attr +LIBVIRT_DEPENDENCIES += attr
package/libvirt/libvirt.mk line 102
Quoted 10 lines
package/libvirt/libvirt.mk new file +10
-0+else +LIBVIRT_CONF_OPTS += --without-attr +endif + +ifeq ($(BR2_PACKAGE_AUDIT),y) +LIBVIRT_CONF_OPTS += --with-audit +LIBVIRT_DEPENDENCIES += audit +else +LIBVIRT_CONF_OPTS += --without-audit +endif
The below is what should be used for bash completion
ifeq ($(BR2_PACKAGE_BASH_COMPLETION),y)LIBVIRT_CONF_OPTS += --with-bash-completionLIBVIRT_DEPENDENCIES += bash-completion
elseLIBVIRT_CONF_OPTS += --without-bash-completion
endif
package/libvirt/libvirt.mk line 109
Quoted 7 lines
package/libvirt/libvirt.mk new file +7
-0+ +ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),y) +LIBVIRT_CONF_OPTS += --with-blkid +LIBVIRT_DEPENDENCIES += util-linux +else +LIBVIRT_CONF_OPTS += --without-blkid +endif
[...]
Thanks,
-Ryan
---
Ryan Barnett | Sr Systems Engineer | Commercial Avionics COLLINS AEROSPACE
400 Collins Rd NE, Cedar Rapids, IA 52498 USA ryan.barnett at collins.com | collinsaerospace.com
CONFIDENTIALITY WARNING: This message may contain proprietary and/or privileged information of Collins Aerospace and its affiliated companies. If you are not the intended recipient, please 1) Do not disclose, copy, distribute or use this message or its contents. 2) Advise the sender by return email. 3) Delete all copies (including all attachments) from your computer. Your cooperation is greatly appreciated.