libselinux/src/Makefile: don't use ln --relative option
PATCH 1/2 libselinux/src/Makefile: don't use ln --relative option
The ln --relative option is not available in fairly old versions of ln, which are still in use in older Linux distributions.
Since the two use of ln --relative can very trivially be implemented differently in libselinux/src/Makefile, let's do so.
--- libselinux/src/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
libselinux/src/Makefile +2 -2
@@ -170,12 +170,12 @@ install: all install -m 755 $(LIBSO) $(DESTDIR)$(SHLIBDIR) test -d $(DESTDIR)$(LIBDIR)/pkgconfig || install -m 755 -d $(DESTDIR)$(LIBDIR)/pkgconfig install -m 644 $(LIBPC) $(DESTDIR)$(LIBDIR)/pkgconfig - ln -sf --relative $(DESTDIR)$(SHLIBDIR)/$(LIBSO) $(DESTDIR)$(LIBDIR)/$(TARGET) + cd $(DESTDIR)$(SHLIBDIR) && ln -sf $(LIBSO) $(TARGET) install-pywrap: pywrap $(PYTHON) setup.py install --prefix=$(PREFIX) `test -n "$(DESTDIR)" && echo --root $(DESTDIR)` install -m 644 $(SWIGPYOUT) $(DESTDIR)$(PYTHONLIBDIR)/selinux/__init__.py - ln -sf --relative $(DESTDIR)$(PYTHONLIBDIR)/selinux/_selinux$(PYCEXT) $(DESTDIR)$(PYTHONLIBDIR)/_selinux$(PYCEXT) + cd $(DESTDIR)$(PYTHONLIBDIR) && ln -sf selinux/_selinux$(PYCEXT) _selinux$(PYCEXT) install-rubywrap: rubywrap test -d $(DESTDIR)$(RUBYINSTALL) || install -m 755 -d $(DESTDIR)$(RUBYINSTALL)
Signature · 1 line
2.21.0
PATCH 2/2 libselinux/src/Makefile: do not use PYCEXT, and rely on the installed file name
PYCEXT is computed by asking the Python intrepreter what is the file extension used for native Python modules.
Unfortunately, when cross-compiling, the host Python doesn't give the proper result: it gives the result matching the build machine, and not the target machine. Due to this, the symlink has an incorrect name, and doesn't point to the .so file that was actually built/installed.
To address this and keep things simple, this patch just changes the ln invocation to rely on the name of the _selinux*.so Python module that was installed.
--- libselinux/src/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
libselinux/src/Makefile +1 -2
@@ -15,7 +15,6 @@ INCLUDEDIR ?= $(PREFIX)/include PYINC ?= $(shell $(PKG_CONFIG) --cflags $(PYPREFIX)) PYLIBS ?= $(shell $(PKG_CONFIG) --libs $(PYPREFIX)) PYTHONLIBDIR ?= $(shell $(PYTHON) -c "from distutils.sysconfig import *; print(get_python_lib(plat_specific=1, prefix='$(PREFIX)'))") -PYCEXT ?= $(shell $(PYTHON) -c 'import imp;print([s for s,m,t in imp.get_suffixes() if t == imp.C_EXTENSION][0])') RUBYINC ?= $(shell $(RUBY) -e 'puts "-I" + RbConfig::CONFIG["rubyarchhdrdir"] + " -I" + RbConfig::CONFIG["rubyhdrdir"]') RUBYLIBS ?= $(shell $(RUBY) -e 'puts "-L" + RbConfig::CONFIG["libdir"] + " -L" + RbConfig::CONFIG["archlibdir"] + " " + RbConfig::CONFIG["LIBRUBYARG_SHARED"]') RUBYINSTALL ?= $(shell $(RUBY) -e 'puts RbConfig::CONFIG["vendorarchdir"]')
@@ -175,7 +174,7 @@ install: all install-pywrap: pywrap $(PYTHON) setup.py install --prefix=$(PREFIX) `test -n "$(DESTDIR)" && echo --root $(DESTDIR)` install -m 644 $(SWIGPYOUT) $(DESTDIR)$(PYTHONLIBDIR)/selinux/__init__.py - cd $(DESTDIR)$(PYTHONLIBDIR) && ln -sf selinux/_selinux$(PYCEXT) _selinux$(PYCEXT) + cd $(DESTDIR)$(PYTHONLIBDIR) && ln -sf selinux/_selinux*.so . install-rubywrap: rubywrap test -d $(DESTDIR)$(RUBYINSTALL) || install -m 755 -d $(DESTDIR)$(RUBYINSTALL)
Signature · 1 line
2.21.0
Re: [PATCH libselinux 2/2] libselinux/src/Makefile: do not use PYCEXT, and rely on the installed file name
Quoted 9 lines · Thomas Petazzoni
PYCEXT is computed by asking the Python intrepreter what is the file extension used for native Python modules.
Unfortunately, when cross-compiling, the host Python doesn't give the proper result: it gives the result matching the build machine, and not the target machine. Due to this, the symlink has an incorrect name, and doesn't point to the .so file that was actually built/installed.
Quoted 5 lines
To address this and keep things simple, this patch just changes the ln invocation to rely on the name of the _selinux*.so Python module that was installed.
Signed-off-by Thomas Petazzoni <[email protected]>
Hi,
Thanks for your patch. At first, I did not like forcing the extension to ".so", because other operating systems use different extensions, but in fact this point is not really an issue because libselinux and libsemanage are very specific to Linux (contrary to libsepol, that may be compiled for MacOS for example in order to analyze a policy there).
Anyway, I do not like using a wildcard pattern in the Makefile to match the produced file. I wanted to reproduce your issue by cross-compiling the python extension with "make CC=aarch64-linux-gnu-gcc DESTDIR=/tmp/selinux install-pywrap", but this fails with the following messages:
creating build
creating build/temp.linux-x86_64-3.7
aarch64-linux-gnu-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -march=x86-64 -mtune=generic -O3 -pipe -fno-plt -march=x86-64 -mtune=generic -O3 -pipe -fno-plt -march=x86-64 -mtune=generic -O3 -pipe -fno-plt -O2 -Werror -Wall -Wextra -Wmissing-format-attribute -Wmissing-noreturn -Wpointer-arith -Wshadow -Wstrict-prototypes -Wundef -Wunused -Wwrite-strings -Wformat=2 -Wno-padded -Wno-cast-align -Wno-cast-qual -Wno-conversion -Wno-missing-prototypes -Wno-packed -Wno-switch-enum -Wno-variadic-macros -Wno-vla -ftrapv -Wno-clobbered -Wno-maybe-uninitialized -Wno-uninitialized -Wno-unused-result -I/tmp/selinux/usr/include -I../include -D_GNU_SOURCE -DNO_ANDROID_BACKEND -Wno-shadow -Wno-cast-function-type -Wno-stringop-truncation -fPIC -I../include -I/tmp/selinux/usr/include -I/usr/include/python3.7m -c selinuxswig_python_wrap.c -o build/temp.linux-x86_64-3.7/selinuxswig_python_wrap.o Assembler messages:
Error: unknown architecture `x86-64'
I am not used to cross-compile native Python extensions so I might miss something obvious. What tools/configuration are you using in order to make setup.py cross-compile correctly? It would be great if the configuration you are using allows getting the produced file extension. And this information would also help creating a configuration for Travis-CI in order to check whether cross-compilation works.
Thanks,
Nicolas
Quoted 28 lines
--- libselinux/src/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)libselinux/src/Makefile +1
-3@@ -15,7 +15,6 @@ INCLUDEDIR ?= $(PREFIX)/include PYINC ?= $(shell $(PKG_CONFIG) --cflags $(PYPREFIX)) PYLIBS ?= $(shell $(PKG_CONFIG) --libs $(PYPREFIX)) PYTHONLIBDIR ?= $(shell $(PYTHON) -c "from distutils.sysconfig import *; print(get_python_lib(plat_specific=1, prefix='$(PREFIX)'))") -PYCEXT ?= $(shell $(PYTHON) -c 'import imp;print([s for s,m,t in imp.get_suffixes() if t == imp.C_EXTENSION][0])') RUBYINC ?= $(shell $(RUBY) -e 'puts "-I" + RbConfig::CONFIG["rubyarchhdrdir"] + " -I" + RbConfig::CONFIG["rubyhdrdir"]') RUBYLIBS ?= $(shell $(RUBY) -e 'puts "-L" + RbConfig::CONFIG["libdir"] + " -L" + RbConfig::CONFIG["archlibdir"] + " " + RbConfig::CONFIG["LIBRUBYARG_SHARED"]') RUBYINSTALL ?= $(shell $(RUBY) -e 'puts RbConfig::CONFIG["vendorarchdir"]')@@ -175,7 +174,7 @@ install: all install-pywrap: pywrap $(PYTHON) setup.py install --prefix=$(PREFIX) `test -n "$(DESTDIR)" && echo --root $(DESTDIR)` install -m 644 $(SWIGPYOUT) $(DESTDIR)$(PYTHONLIBDIR)/selinux/__init__.py - cd $(DESTDIR)$(PYTHONLIBDIR) && ln -sf selinux/_selinux$(PYCEXT) _selinux$(PYCEXT) + cd $(DESTDIR)$(PYTHONLIBDIR) && ln -sf selinux/_selinux*.so . install-rubywrap: rubywrap test -d $(DESTDIR)$(RUBYINSTALL) || install -m 755 -d $(DESTDIR)$(RUBYINSTALL) --2.21.0
Quoted 5 lines · Thomas Petazzoni
The ln --relative option is not available in fairly old versions of ln, which are still in use in older Linux distributions.
Since the two use of ln --relative can very trivially be implemented differently in libselinux/src/Makefile, let's do so.
This changes where the libselinux.so symlink is created (from LIBDIR to SHLIBDIR), and yields a broken build for make DESTDIR=~/obj install. As a result, the travis build breaks.
Quoted 26 lines
Signed-off-by Thomas Petazzoni <[email protected]>--- libselinux/src/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)libselinux/src/Makefile +2
-2@@ -170,12 +170,12 @@ install: all install -m 755 $(LIBSO) $(DESTDIR)$(SHLIBDIR) test -d $(DESTDIR)$(LIBDIR)/pkgconfig || install -m 755 -d $(DESTDIR)$(LIBDIR)/pkgconfig install -m 644 $(LIBPC) $(DESTDIR)$(LIBDIR)/pkgconfig - ln -sf --relative $(DESTDIR)$(SHLIBDIR)/$(LIBSO) $(DESTDIR)$(LIBDIR)/$(TARGET) + cd $(DESTDIR)$(SHLIBDIR) && ln -sf $(LIBSO) $(TARGET) install-pywrap: pywrap $(PYTHON) setup.py install --prefix=$(PREFIX) `test -n "$(DESTDIR)" && echo --root $(DESTDIR)` install -m 644 $(SWIGPYOUT) $(DESTDIR)$(PYTHONLIBDIR)/selinux/__init__.py - ln -sf --relative $(DESTDIR)$(PYTHONLIBDIR)/selinux/_selinux$(PYCEXT) $(DESTDIR)$(PYTHONLIBDIR)/_selinux$(PYCEXT) + cd $(DESTDIR)$(PYTHONLIBDIR) && ln -sf selinux/_selinux$(PYCEXT) _selinux$(PYCEXT) install-rubywrap: rubywrap test -d $(DESTDIR)$(RUBYINSTALL) || install -m 755 -d $(DESTDIR)$(RUBYINSTALL)