Skip to contentSkip to conversation

PCI/ASPM: Do not initialize link state when aspm_disabled is set

PATCH In review Sasha Levin 2 participants 22 messages Oct 25, 2019

Subsystems (12)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/20 PCI/ASPM: Do not initialize link state when aspm_disabled is set

From: Patrick Talbert <[email protected]>

[ Upstream commit 17c91487364fb33797ed84022564ee7544ac4945 ]

Now that ASPM is configured for *all* PCIe devices at boot, a problem is seen with systems that set the FADT NO_ASPM bit. This bit indicates that the OS should not alter the ASPM state, but when pcie_aspm_init_link_state() runs it only checks for !aspm_support_enabled. This misses the ACPI_FADT_NO_ASPM case because that is setting aspm_disabled.

The result is systems may hang at boot after 1302fcf; avoidable if they boot with pcie_aspm=off (sets !aspm_support_enabled).

Fix this by having aspm_init_link_state() check for either !aspm_support_enabled or acpm_disabled.

Fixes 1302fcf0d03e ("PCI: Configure *all* devices, not just hot-added ones")
---
 drivers/pci/pcie/aspm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/pcie/aspm.c +1 -1
index b12fe65d07f82..f69a9180c5ffd 100644
@@ -581,7 +581,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
 	struct pcie_link_state *link;
 	int blacklist = !!pcie_aspm_sanity_check(pdev);
 
-	if (!aspm_support_enabled)
+	if (!aspm_support_enabled || aspm_disabled)
 		return;
 
 	if (pdev->link_state)
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/20 HID: i2c-hid: Add Odys Winbook 13 to descriptor override

From: Hans de Goede <[email protected]>

[ Upstream commit f8f807441eefddc3c6d8a378421f0ede6361d565 ]

The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working.

---
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +8 -0
index cac262a912c12..c5ac23b75143a 100644
@@ -338,6 +338,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
 		},
 		.driver_data = (void *)&sipodev_desc
 	},
+	{
+		.ident = "Odys Winbook 13",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AXDIA International GmbH"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WINBOOK 13"),
+		},
+		.driver_data = (void *)&sipodev_desc
+	},
 	{ }	/* Terminate list */
 };
 
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/20 ACPI: video: Use vendor backlight on Sony VPCEH3U1E

In reply to Sasha Levin

From: Zhang Rui <[email protected]>

[ Upstream commit aefa763b18a220f5fc1d5ab02af09158b6cc36ea ]

On Sony Vaio VPCEH3U1E, ACPI backlight control does not work, and native backlight works. Thus force use vendor backlight control on this system.

---
 drivers/acpi/video_detect.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/acpi/video_detect.c +8 -0
index cdc47375178e7..555f568dbf3e4 100644
@@ -135,6 +135,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
 		},
 	},
+	{
+	.callback = video_detect_force_vendor,
+	.ident = "Sony VPCEH3U1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEH3U1E"),
+		},
+	},
 
 	/*
 	 * These models have a working acpi_video backlight control, and using
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/20 driver core: platform: Fix the usage of platform device name(pdev->name)

In reply to Sasha Levin

From: Venkata Narendra Kumar Gutta <[email protected]>

[ Upstream commit edb16da34b084c66763f29bee42b4e6bb33c3d66 ]

Platform core is using pdev->name as the platform device name to do the binding of the devices with the drivers. But, when the platform driver overrides the platform device name with dev_set_name(), the pdev->name is pointing to a location which is freed and becomes an invalid parameter to do the binding match.

use-after-free instance:

[   33.325013] BUG: KASAN: use-after-free in strcmp+0x8c/0xb0
[   33.330646] Read of size 1 at addr ffffffc10beae600 by task modprobe
[   33.339068] CPU: 5 PID: 518 Comm: modprobe Tainted:
			G S      W  O      4.19.30+ #3
[   33.346835] Hardware name: MTP (DT)
[   33.350419] Call trace:
[   33.352941]  dump_backtrace+0x0/0x3b8
[   33.356713]  show_stack+0x24/0x30
[   33.360119]  dump_stack+0x160/0x1d8
[   33.363709]  print_address_description+0x84/0x2e0
[   33.368549]  kasan_report+0x26c/0x2d0
[   33.372322]  __asan_report_load1_noabort+0x2c/0x38
[   33.377248]  strcmp+0x8c/0xb0
[   33.380306]  platform_match+0x70/0x1f8
[   33.384168]  __driver_attach+0x78/0x3a0
[   33.388111]  bus_for_each_dev+0x13c/0x1b8
[   33.392237]  driver_attach+0x4c/0x58
[   33.395910]  bus_add_driver+0x350/0x560
[   33.399854]  driver_register+0x23c/0x328
[   33.403886]  __platform_driver_register+0xd0/0xe0

So, use dev_name(&pdev->dev), which fetches the platform device name from the kobject(dev->kobj->name) of the device instead of the pdev->name.

---
 drivers/base/platform.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/base/platform.c +4 -4
index 14ff40371f013..ffa77b3df4ba2 100644
@@ -845,7 +845,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
 	if (len != -ENODEV)
 		return len;
 
-	len = snprintf(buf, PAGE_SIZE, "platform:%s\n", pdev->name);
+	len = snprintf(buf, PAGE_SIZE, "platform:%s\n", dev_name(&pdev->dev));
 
 	return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len;
 }
@@ -921,7 +921,7 @@ static int platform_uevent(struct device *dev, struct kobj_uevent_env *env)
 		return rc;
 
 	add_uevent_var(env, "MODALIAS=%s%s", PLATFORM_MODULE_PREFIX,
-			pdev->name);
+			dev_name(&pdev->dev));
 	return 0;
 }
 
@@ -930,7 +930,7 @@ static const struct platform_device_id *platform_match_id(
 			struct platform_device *pdev)
 {
 	while (id->name[0]) {
-		if (strcmp(pdev->name, id->name) == 0) {
+		if (strcmp(dev_name(&pdev->dev), id->name) == 0) {
 			pdev->id_entry = id;
 			return id;
 		}
@@ -974,7 +974,7 @@ static int platform_match(struct device *dev, struct device_driver *drv)
 		return platform_match_id(pdrv->id_table, pdev) != NULL;
 
 	/* fall-back to driver name match */
-	return (strcmp(pdev->name, drv->name) == 0);
+	return (strcmp(dev_name(&pdev->dev), drv->name) == 0);
 }
 
 #ifdef CONFIG_PM_SLEEP
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/20 powerpc/pseries/hvconsole: Fix stack overread via udbg

In reply to Sasha Levin

From: Daniel Axtens <[email protected]>

[ Upstream commit 934bda59f286d0221f1a3ebab7f5156a996cc37d ]

While developing KASAN for 64-bit book3s, I hit the following stack over-read.

It occurs because the hypercall to put characters onto the terminal takes 2 longs (128 bits/16 bytes) of characters at a time, and so hvc_put_chars() would unconditionally copy 16 bytes from the argument buffer, regardless of supplied length. However, udbg_hvc_putc() can call hvc_put_chars() with a single-byte buffer, leading to the error.

==================================================================

  BUG: KASAN: stack-out-of-bounds in hvc_put_chars+0xdc/0x110
  Read of size 8 at addr c0000000023e7a90 by task swapper/0

  CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc2-next-20190528-02824-g048a6ab4835b #113
  Call Trace:
    dump_stack+0x104/0x154 (unreliable)
    print_address_description+0xa0/0x30c
    __kasan_report+0x20c/0x224
    kasan_report+0x18/0x30
    __asan_report_load8_noabort+0x24/0x40
    hvc_put_chars+0xdc/0x110
    hvterm_raw_put_chars+0x9c/0x110
    udbg_hvc_putc+0x154/0x200
    udbg_write+0xf0/0x240
    console_unlock+0x868/0xd30
    register_console+0x970/0xe90
    register_early_udbg_console+0xf8/0x114
    setup_arch+0x108/0x790
    start_kernel+0x104/0x784
    start_here_common+0x1c/0x534

  Memory state around the buggy address:
   c0000000023e7980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   c0000000023e7a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
  >c0000000023e7a80: f1 f1 01 f2 f2 f2 00 00 00 00 00 00 00 00 00 00
                           ^
   c0000000023e7b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   c0000000023e7b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ==================================================================

Document that a 16-byte buffer is requred, and provide it in udbg.

---
 arch/powerpc/platforms/pseries/hvconsole.c |  2 +-
 drivers/tty/hvc/hvc_vio.c                  | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 2 deletions(-)
arch/powerpc/platforms/pseries/hvconsole.c +1 -1
index 74da18de853af..73ec15cd27080 100644
@@ -62,7 +62,7 @@ EXPORT_SYMBOL(hvc_get_chars);
  * @vtermno: The vtermno or unit_address of the adapter from which the data
  *	originated.
  * @buf: The character buffer that contains the character data to send to
- *	firmware.
+ *	firmware. Must be at least 16 bytes, even if count is less than 16.
  * @count: Send this number of characters.
  */
 int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
drivers/tty/hvc/hvc_vio.c +15 -1
index b05dc50866279..8bab8b00d47d6 100644
@@ -120,6 +120,14 @@ static int hvterm_raw_get_chars(uint32_t vtermno, char *buf, int count)
 	return got;
 }
 
+/**
+ * hvterm_raw_put_chars: send characters to firmware for given vterm adapter
+ * @vtermno: The virtual terminal number.
+ * @buf: The characters to send. Because of the underlying hypercall in
+ *       hvc_put_chars(), this buffer must be at least 16 bytes long, even if
+ *       you are sending fewer chars.
+ * @count: number of chars to send.
+ */
 static int hvterm_raw_put_chars(uint32_t vtermno, const char *buf, int count)
 {
 	struct hvterm_priv *pv = hvterm_privs[vtermno];
@@ -232,6 +240,7 @@ static const struct hv_ops hvterm_hvsi_ops = {
 static void udbg_hvc_putc(char c)
 {
 	int count = -1;
+	unsigned char bounce_buffer[16];
 
 	if (!hvterm_privs[0])
 		return;
@@ -242,7 +251,12 @@ static void udbg_hvc_putc(char c)
 	do {
 		switch(hvterm_privs[0]->proto) {
 		case HV_PROTOCOL_RAW:
-			count = hvterm_raw_put_chars(0, &c, 1);
+			/*
+			 * hvterm_raw_put_chars requires at least a 16-byte
+			 * buffer, so go via the bounce buffer
+			 */
+			bounce_buffer[0] = c;
+			count = hvterm_raw_put_chars(0, bounce_buffer, 1);
 			break;
 		case HV_PROTOCOL_HVSI:
 			count = hvterm_hvsi_put_chars(0, &c, 1);
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/20 scsi: RDMA/srp: Fix a sleep-in-invalid-context bug

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit fd56141244066a6a21ef458670071c58b6402035 ]

The previous patch guarantees that srp_queuecommand() does not get invoked while reconnecting occurs. Hence remove the code from srp_queuecommand() that prevents command queueing while reconnecting. This patch avoids that the following can appear in the kernel log:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747

in_atomic(): 1, irqs_disabled(): 0, pid: 5600, name: scsi_eh_9
1 lock held by scsi_eh_9/5600:
#0: (rcu_read_lock){....}, at: [<00000000cbb798c7>] __blk_mq_run_hw_queue+0xf1/0x1e0
Preemption disabled at:

[<00000000139badf2>] __blk_mq_delay_run_hw_queue+0x78/0xf0
CPU: 9 PID: 5600 Comm: scsi_eh_9 Tainted: G        W        4.15.0-rc4-dbg+ #1
Hardware name: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.5.4 01/22/2016
Call Trace:
 dump_stack+0x67/0x99
 ___might_sleep+0x16a/0x250 [ib_srp]
 __mutex_lock+0x46/0x9d0
 srp_queuecommand+0x356/0x420 [ib_srp]
 scsi_dispatch_cmd+0xf6/0x3f0
 scsi_queue_rq+0x4a8/0x5f0
 blk_mq_dispatch_rq_list+0x73/0x440
 blk_mq_sched_dispatch_requests+0x109/0x1a0
 __blk_mq_run_hw_queue+0x131/0x1e0
 __blk_mq_delay_run_hw_queue+0x9a/0xf0
 blk_mq_run_hw_queue+0xc0/0x1e0
 blk_mq_start_hw_queues+0x2c/0x40
 scsi_run_queue+0x18e/0x2d0
 scsi_run_host_queues+0x22/0x40
 scsi_error_handler+0x18d/0x5f0
 kthread+0x11c/0x140
 ret_from_fork+0x24/0x30
---
 drivers/infiniband/ulp/srp/ib_srp.c | 21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)
drivers/infiniband/ulp/srp/ib_srp.c +2 -19
index 74de1ae48d4f7..a3145ae1d66d2 100644
@@ -2102,7 +2102,6 @@ static void srp_handle_qp_err(struct ib_cq *cq, struct ib_wc *wc,
 static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 {
 	struct srp_target_port *target = host_to_target(shost);
-	struct srp_rport *rport = target->rport;
 	struct srp_rdma_ch *ch;
 	struct srp_request *req;
 	struct srp_iu *iu;
@@ -2112,16 +2111,6 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 	u32 tag;
 	u16 idx;
 	int len, ret;
-	const bool in_scsi_eh = !in_interrupt() && current == shost->ehandler;
-
-	/*
-	 * The SCSI EH thread is the only context from which srp_queuecommand()
-	 * can get invoked for blocked devices (SDEV_BLOCK /
-	 * SDEV_CREATED_BLOCK). Avoid racing with srp_reconnect_rport() by
-	 * locking the rport mutex if invoked from inside the SCSI EH.
-	 */
-	if (in_scsi_eh)
-		mutex_lock(&rport->mutex);
 
 	scmnd->result = srp_chkready(target->rport);
 	if (unlikely(scmnd->result))
@@ -2183,13 +2172,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 		goto err_unmap;
 	}
 
-	ret = 0;
-
-unlock_rport:
-	if (in_scsi_eh)
-		mutex_unlock(&rport->mutex);
-
-	return ret;
+	return 0;
 
 err_unmap:
 	srp_unmap_data(scmnd, ch, req);
@@ -2211,7 +2194,7 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 		ret = SCSI_MLQUEUE_HOST_BUSY;
 	}
 
-	goto unlock_rport;
+	return ret;
 }
 
 /*
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/20 drm/msm: stop abusing dma_map/unmap for cache

In reply to Sasha Levin

From: Rob Clark <[email protected]>

[ Upstream commit 0036bc73ccbe7e600a3468bf8e8879b122252274 ]

Recently splats like this started showing up:

   WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0
   Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide
   CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G        W         5.2.0-rc5-next-20190619+ #2317
   Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018
   Workqueue: msm msm_gem_free_work [msm]
   pstate: 80c00005 (Nzcv daif +PAN +UAO)
   pc : __iommu_dma_unmap+0xb8/0xc0
   lr : __iommu_dma_unmap+0x54/0xc0
   sp : ffff0000119abce0
   x29: ffff0000119abce0 x28: 0000000000000000
   x27: ffff8001f9946648 x26: ffff8001ec271068
   x25: 0000000000000000 x24: ffff8001ea3580a8
   x23: ffff8001f95ba010 x22: ffff80018e83ba88
   x21: ffff8001e548f000 x20: fffffffffffff000
   x19: 0000000000001000 x18: 00000000c00001fe
   x17: 0000000000000000 x16: 0000000000000000
   x15: ffff000015b70068 x14: 0000000000000005
   x13: 0003142cc1be1768 x12: 0000000000000001
   x11: ffff8001f6de9100 x10: 0000000000000009
   x9 : ffff000015b78000 x8 : 0000000000000000
   x7 : 0000000000000001 x6 : fffffffffffff000
   x5 : 0000000000000fff x4 : ffff00001065dbc8
   x3 : 000000000000000d x2 : 0000000000001000
   x1 : fffffffffffff000 x0 : 0000000000000000
   Call trace:
    __iommu_dma_unmap+0xb8/0xc0
    iommu_dma_unmap_sg+0x98/0xb8
    put_pages+0x5c/0xf0 [msm]
    msm_gem_free_work+0x10c/0x150 [msm]
    process_one_work+0x1e0/0x330
    worker_thread+0x40/0x438
    kthread+0x12c/0x130
    ret_from_fork+0x10/0x18
   ---[ end trace afc0dc5ab81a06bf ]---

Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint.

---
 drivers/gpu/drm/msm/msm_gem.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/msm_gem.c +2 -2
index 795660e29b2ce..a472d4d902dde 100644
@@ -106,7 +106,7 @@ static struct page **get_pages(struct drm_gem_object *obj)
 		 * because display controller, GPU, etc. are not coherent:
 		 */
 		if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
-			dma_map_sg(dev->dev, msm_obj->sgt->sgl,
+			dma_sync_sg_for_device(dev->dev, msm_obj->sgt->sgl,
 					msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
 	}
 
@@ -124,7 +124,7 @@ static void put_pages(struct drm_gem_object *obj)
 			 * GPU, etc. are not coherent:
 			 */
 			if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
-				dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl,
+				dma_sync_sg_for_cpu(obj->dev->dev, msm_obj->sgt->sgl,
 					     msm_obj->sgt->nents,
 					     DMA_BIDIRECTIONAL);
 
Signature · 6 lines
2.20.1

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
author maintainer
#7 lore raw

PATCH 8/20 drm/msm: Use the correct dma_sync calls in msm_gem

In reply to Sasha Levin

From: Rob Clark <[email protected]>

[ Upstream commit 3de433c5b38af49a5fc7602721e2ab5d39f1e69c ]

[subject was: drm/msm: shake fist angrily at dma-mapping]

So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss).

Fixes this splat on mdp5 devices:

   Unable to handle kernel paging request at virtual address ffffffff80000000
   Mem abort info:
     ESR = 0x96000144
     Exception class = DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
   Data abort info:
     ISV = 0, ISS = 0x00000144
     CM = 1, WnR = 1
   swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000
   [ffffffff80000000] pgd=0000000000000000
   Internal error: Oops: 96000144 [#1] SMP
   Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
   CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
   Hardware name: Samsung Galaxy A5U (EUR) (DT)
   Workqueue: events deferred_probe_work_func
   pstate: 80000005 (Nzcv daif -PAN -UAO)
   pc : __clean_dcache_area_poc+0x20/0x38
   lr : arch_sync_dma_for_device+0x28/0x30
   sp : ffff0000115736a0
   x29: ffff0000115736a0 x28: 0000000000000001
   x27: ffff800074830800 x26: ffff000011478000
   x25: 0000000000000000 x24: 0000000000000001
   x23: ffff000011478a98 x22: ffff800009fd1c10
   x21: 0000000000000001 x20: ffff800075ad0a00
   x19: 0000000000000000 x18: ffff0000112b2000
   x17: 0000000000000000 x16: 0000000000000000
   x15: 00000000fffffff0 x14: ffff000011455d70
   x13: 0000000000000000 x12: 0000000000000028
   x11: 0000000000000001 x10: ffff00001106c000
   x9 : ffff7e0001d6b380 x8 : 0000000000001000
   x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382
   x5 : 0000000000000000 x4 : 0000000000001000
   x3 : 000000000000003f x2 : 0000000000000040
   x1 : ffffffff80001000 x0 : ffffffff80000000
   Call trace:
    __clean_dcache_area_poc+0x20/0x38
    dma_direct_sync_sg_for_device+0xb8/0xe8
    get_pages+0x22c/0x250 [msm]
    msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
    ...

Fixes the combination of two patches:

Fixes 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache)
Fixes 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
[seanpaul changed subject to something more desriptive]
---
 drivers/gpu/drm/msm/msm_gem.c | 47 +++++++++++++++++++++++++++++++----
 1 file changed, 42 insertions(+), 5 deletions(-)
drivers/gpu/drm/msm/msm_gem.c +42 -5
index a472d4d902dde..569e8c45a59aa 100644
@@ -40,6 +40,46 @@ static bool use_pages(struct drm_gem_object *obj)
 	return !msm_obj->vram_node;
 }
 
+/*
+ * Cache sync.. this is a bit over-complicated, to fit dma-mapping
+ * API.  Really GPU cache is out of scope here (handled on cmdstream)
+ * and all we need to do is invalidate newly allocated pages before
+ * mapping to CPU as uncached/writecombine.
+ *
+ * On top of this, we have the added headache, that depending on
+ * display generation, the display's iommu may be wired up to either
+ * the toplevel drm device (mdss), or to the mdp sub-node, meaning
+ * that here we either have dma-direct or iommu ops.
+ *
+ * Let this be a cautionary tail of abstraction gone wrong.
+ */
+
+static void sync_for_device(struct msm_gem_object *msm_obj)
+{
+	struct device *dev = msm_obj->base.dev->dev;
+
+	if (get_dma_ops(dev)) {
+		dma_sync_sg_for_device(dev, msm_obj->sgt->sgl,
+			msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
+	} else {
+		dma_map_sg(dev, msm_obj->sgt->sgl,
+			msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
+	}
+}
+
+static void sync_for_cpu(struct msm_gem_object *msm_obj)
+{
+	struct device *dev = msm_obj->base.dev->dev;
+
+	if (get_dma_ops(dev)) {
+		dma_sync_sg_for_cpu(dev, msm_obj->sgt->sgl,
+			msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
+	} else {
+		dma_unmap_sg(dev, msm_obj->sgt->sgl,
+			msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
+	}
+}
+
 /* allocate pages from VRAM carveout, used when no IOMMU: */
 static struct page **get_pages_vram(struct drm_gem_object *obj,
 		int npages)
@@ -106,8 +146,7 @@ static struct page **get_pages(struct drm_gem_object *obj)
 		 * because display controller, GPU, etc. are not coherent:
 		 */
 		if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
-			dma_sync_sg_for_device(dev->dev, msm_obj->sgt->sgl,
-					msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
+			sync_for_device(msm_obj);
 	}
 
 	return msm_obj->pages;
@@ -124,9 +163,7 @@ static void put_pages(struct drm_gem_object *obj)
 			 * GPU, etc. are not coherent:
 			 */
 			if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
-				dma_sync_sg_for_cpu(obj->dev->dev, msm_obj->sgt->sgl,
-					     msm_obj->sgt->nents,
-					     DMA_BIDIRECTIONAL);
+				sync_for_cpu(msm_obj);
 
 			sg_free_table(msm_obj->sgt);
 			kfree(msm_obj->sgt);
Signature · 6 lines
2.20.1

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
author maintainer
#8 lore raw

PATCH 9/20 sch_netem: fix rcu splat in netem_enqueue()

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit 159d2c7d8106177bd9a986fd005a311fe0d11285 ]

qdisc_root() use from netem_enqueue() triggers a lockdep warning.

__dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned.

WARNING: suspicious RCU usage
5.3.0-rc7+ #0 Not tainted
-----------------------------
include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor427/8855:
#0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838

stack backtrace:
CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357
 qdisc_root include/net/sch_generic.h:492 [inline]
 netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479
 __dev_xmit_skb net/core/dev.c:3527 [inline]
 __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902
 neigh_hh_output include/net/neighbour.h:500 [inline]
 neigh_output include/net/neighbour.h:509 [inline]
 ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290
 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125
 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555
 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887
 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174
 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
---
 include/net/sch_generic.h | 5 +++++
 net/sched/sch_netem.c     | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)
include/net/sch_generic.h +5 -0
index 538f3c4458b04..5d5a137b9067f 100644
@@ -276,6 +276,11 @@ static inline struct Qdisc *qdisc_root(const struct Qdisc *qdisc)
 	return q;
 }
 
+static inline struct Qdisc *qdisc_root_bh(const struct Qdisc *qdisc)
+{
+	return rcu_dereference_bh(qdisc->dev_queue->qdisc);
+}
+
 static inline struct Qdisc *qdisc_root_sleeping(const struct Qdisc *qdisc)
 {
 	return qdisc->dev_queue->qdisc_sleeping;
net/sched/sch_netem.c +1 -1
index 12e3ae09c4ba1..95002e56fa48b 100644
@@ -475,7 +475,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	 * skb will be queued.
 	 */
 	if (count > 1 && (skb2 = skb_clone(skb, GFP_ATOMIC)) != NULL) {
-		struct Qdisc *rootq = qdisc_root(sch);
+		struct Qdisc *rootq = qdisc_root_bh(sch);
 		u32 dupsave = q->duplicate; /* prevent duplicating a dup... */
 
 		q->duplicate = 0;
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/20 llc: fix sk_buff leak in llc_sap_state_process()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit c6ee11c39fcc1fb55130748990a8f199e76263b4 ]

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff888116270800 (size 224):
       comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff  . .*.....@=*....
       backtrace:
         [<000000004d41b4cc>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250  net/core/skbuff.c:5327
         [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0  net/core/sock.c:2225
         [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242
         [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933
         [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline]
         [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671
         [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964
	 [...]

The bug is that llc_sap_state_process() always takes an extra reference to the skb, but sometimes neither llc_sap_next_state() nor llc_sap_state_process() itself drops this reference.

Fix it by changing llc_sap_next_state() to never consume a reference to the skb, rather than sometimes do so and sometimes not. Then remove the extra skb_get() and kfree_skb() from llc_sap_state_process().

Reported-by [email protected]
Reported-by [email protected]
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/llc_s_ac.c | 12 +++++++++---
 net/llc/llc_sap.c  | 23 ++++++++---------------
 2 files changed, 17 insertions(+), 18 deletions(-)
net/llc/llc_s_ac.c +9 -3
index a94bd56bcac6f..7ae4cc684d3ab 100644
@@ -58,8 +58,10 @@ int llc_sap_action_send_ui(struct llc_sap *sap, struct sk_buff *skb)
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_ui_cmd(skb);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
@@ -81,8 +83,10 @@ int llc_sap_action_send_xid_c(struct llc_sap *sap, struct sk_buff *skb)
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_xid_cmd(skb, LLC_XID_NULL_CLASS_2, 0);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
@@ -135,8 +139,10 @@ int llc_sap_action_send_test_c(struct llc_sap *sap, struct sk_buff *skb)
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_test_cmd(skb);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
net/llc/llc_sap.c +8 -15
index 5404d0d195cc5..d51ff9df9c959 100644
@@ -197,29 +197,22 @@ static int llc_sap_next_state(struct llc_sap *sap, struct sk_buff *skb)
  *	After executing actions of the event, upper layer will be indicated
  *	if needed(on receiving an UI frame). sk can be null for the
  *	datalink_proto case.
+ *
+ *	This function always consumes a reference to the skb.
  */
 static void llc_sap_state_process(struct llc_sap *sap, struct sk_buff *skb)
 {
 	struct llc_sap_state_ev *ev = llc_sap_ev(skb);
 
-	/*
-	 * We have to hold the skb, because llc_sap_next_state
-	 * will kfree it in the sending path and we need to
-	 * look at the skb->cb, where we encode llc_sap_state_ev.
-	 */
-	skb_get(skb);
 	ev->ind_cfm_flag = 0;
 	llc_sap_next_state(sap, skb);
-	if (ev->ind_cfm_flag == LLC_IND) {
-		if (skb->sk->sk_state == TCP_LISTEN)
-			kfree_skb(skb);
-		else {
-			llc_save_primitive(skb->sk, skb, ev->prim);
 
-			/* queue skb to the user. */
-			if (sock_queue_rcv_skb(skb->sk, skb))
-				kfree_skb(skb);
-		}
+	if (ev->ind_cfm_flag == LLC_IND && skb->sk->sk_state != TCP_LISTEN) {
+		llc_save_primitive(skb->sk, skb, ev->prim);
+
+		/* queue skb to the user. */
+		if (sock_queue_rcv_skb(skb->sk, skb) == 0)
+			return;
 	}
 	kfree_skb(skb);
 }
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 11/20 llc: fix sk_buff leak in llc_conn_service()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit b74555de21acd791f12c4a1aeaf653dd7ac21133 ]

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff88811eb3de00 (size 224):
       comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff  ..8$............
       backtrace:
         [<000000008d1c66a1>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54
         [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140  net/llc/llc_c_ac.c:777
         [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475  [inline]
         [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline]
         [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640  net/llc/llc_conn.c:75
         [<00000000f27e53c1>] llc_establish_connection+0x110/0x170  net/llc/llc_if.c:109
         [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477
         [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840
         [...]

The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c3f81 ("llc:
properly handle dev_queue_xmit() return value") it doesn't.

Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before.

Fixes b85ab56c3f81 ("llc: properly handle dev_queue_xmit() return value")
Reported-by [email protected]
---
 include/net/llc_conn.h |  2 +-
 net/llc/llc_c_ac.c     |  8 ++++++--
 net/llc/llc_conn.c     | 32 +++++++++-----------------------
 3 files changed, 16 insertions(+), 26 deletions(-)
include/net/llc_conn.h +1 -1
index df528a6235487..ea985aa7a6c5e 100644
@@ -104,7 +104,7 @@ void llc_sk_reset(struct sock *sk);
 
 /* Access to a connection */
 int llc_conn_state_process(struct sock *sk, struct sk_buff *skb);
-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
+void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit);
 void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit);
net/llc/llc_c_ac.c +6 -2
index 4b60f68cb4925..8354ae40ec85b 100644
@@ -372,6 +372,7 @@ int llc_conn_ac_send_i_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
 	llc_pdu_init_as_i_cmd(skb, 1, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
+		skb_get(skb);
 		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
@@ -389,7 +390,8 @@ static int llc_conn_ac_send_i_cmd_p_set_0(struct sock *sk, struct sk_buff *skb)
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		rc = llc_conn_send_pdu(sk, skb);
+		skb_get(skb);
+		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
@@ -406,6 +408,7 @@ int llc_conn_ac_send_i_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
+		skb_get(skb);
 		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
@@ -916,7 +919,8 @@ static int llc_conn_ac_send_i_rsp_f_set_ackpf(struct sock *sk,
 	llc_pdu_init_as_i_cmd(skb, llc->ack_pf, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		rc = llc_conn_send_pdu(sk, skb);
+		skb_get(skb);
+		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
net/llc/llc_conn.c +9 -23
index b9290a183a2fd..94c78cc49d3e0 100644
@@ -30,7 +30,7 @@
 #endif
 
 static int llc_find_offset(int state, int ev_type);
-static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *skb);
+static void llc_conn_send_pdus(struct sock *sk);
 static int llc_conn_service(struct sock *sk, struct sk_buff *skb);
 static int llc_exec_conn_trans_actions(struct sock *sk,
 				       struct llc_conn_state_trans *trans,
@@ -193,11 +193,11 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 	return rc;
 }
 
-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
+void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
 {
 	/* queue PDU to send to MAC layer */
 	skb_queue_tail(&sk->sk_write_queue, skb);
-	return llc_conn_send_pdus(sk, skb);
+	llc_conn_send_pdus(sk);
 }
 
 /**
@@ -255,7 +255,7 @@ void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit)
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk, NULL);
+	llc_conn_send_pdus(sk);
 out:;
 }
 
@@ -296,7 +296,7 @@ void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit)
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk, NULL);
+	llc_conn_send_pdus(sk);
 out:;
 }
 
@@ -340,16 +340,12 @@ int llc_conn_remove_acked_pdus(struct sock *sk, u8 nr, u16 *how_many_unacked)
 /**
  *	llc_conn_send_pdus - Sends queued PDUs
  *	@sk: active connection
- *	@hold_skb: the skb held by caller, or NULL if does not care
  *
- *	Sends queued pdus to MAC layer for transmission. When @hold_skb is
- *	NULL, always return 0. Otherwise, return 0 if @hold_skb is sent
- *	successfully, or 1 for failure.
+ *	Sends queued pdus to MAC layer for transmission.
  */
-static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb)
+static void llc_conn_send_pdus(struct sock *sk)
 {
 	struct sk_buff *skb;
-	int ret = 0;
 
 	while ((skb = skb_dequeue(&sk->sk_write_queue)) != NULL) {
 		struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -361,20 +357,10 @@ static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb)
 			skb_queue_tail(&llc_sk(sk)->pdu_unack_q, skb);
 			if (!skb2)
 				break;
-			dev_queue_xmit(skb2);
-		} else {
-			bool is_target = skb == hold_skb;
-			int rc;
-
-			if (is_target)
-				skb_get(skb);
-			rc = dev_queue_xmit(skb);
-			if (is_target)
-				ret = rc;
+			skb = skb2;
 		}
+		dev_queue_xmit(skb);
 	}
-
-	return ret;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/20 bonding: fix potential NULL deref in bond_update_slave_arr

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit a7137534b597b7c303203e6bc3ed87e87a273bb8 ]

syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr

A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL.

[1]

Failed to build slave-array.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access

general protection fault: 0000 [#1] SMP KASAN PTI
Modules linked in:
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039
RSP: 0018:ffff88018fe33678 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000
RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20
RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0
FS:  00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923
 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline]
 [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562
 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328
 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495
 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088
 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196
 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline]
 [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline]
 [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688
 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline]
 [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696
 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305
 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Cc Mahesh Bandewar <[email protected]>
---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +1 -1
index 8820fb1aec5b4..c1971bca62fb1 100644
@@ -3963,7 +3963,7 @@ int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave)
 		 * this to-be-skipped slave to send a packet out.
 		 */
 		old_arr = rtnl_dereference(bond->slave_arr);
-		for (idx = 0; idx < old_arr->count; idx++) {
+		for (idx = 0; old_arr != NULL && idx < old_arr->count; idx++) {
 			if (skipslave == old_arr->arr[idx]) {
 				old_arr->arr[idx] =
 				    old_arr->arr[old_arr->count-1];
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/20 net: usb: sr9800: fix uninitialized local variable

In reply to Sasha Levin

From: Valentin Vidic <[email protected]>

[ Upstream commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 ]

Make sure res does not contain random value if the call to sr_read_cmd fails for some reason.

---
 drivers/net/usb/sr9800.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/usb/sr9800.c +1 -1
index 004c955c1fd1b..da0ae16f5c74c 100644
@@ -336,7 +336,7 @@ static void sr_set_multicast(struct net_device *net)
 static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(net);
-	__le16 res;
+	__le16 res = 0;
 
 	mutex_lock(&dev->phy_mutex);
 	sr_set_sw_mii(dev);
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 14/20 jbd2: flush_descriptor(): Do not decrease buffer head's ref count

In reply to Sasha Levin

From: Chandan Rajendra <[email protected]>

[ Upstream commit 547b9ad698b434eadca46319cb47e5875b55ef03 ]

When executing generic/388 on a ppc64le machine, we notice the following call trace,

VFS: brelse: Trying to free free buffer

WARNING: CPU: 0 PID: 6637 at /root/repos/linux/fs/buffer.c:1195 __brelse+0x84/0xc0

Call Trace:
 __brelse+0x80/0xc0 (unreliable)
 invalidate_bh_lru+0x78/0xc0
 on_each_cpu_mask+0xa8/0x130
 on_each_cpu_cond_mask+0x130/0x170
 invalidate_bh_lrus+0x44/0x60
 invalidate_bdev+0x38/0x70
 ext4_put_super+0x294/0x560
 generic_shutdown_super+0xb0/0x170
 kill_block_super+0x38/0xb0
 deactivate_locked_super+0xa4/0xf0
 cleanup_mnt+0x164/0x1d0
 task_work_run+0x110/0x160
 do_notify_resume+0x414/0x460
 ret_from_except_lite+0x70/0x74

The warning happens because flush_descriptor() drops bh reference it does not own. The bh reference acquired by jbd2_journal_get_descriptor_buffer() is owned by the log_bufs list and gets released when this list is processed. The reference for doing IO is only acquired in write_dirty_buffer() later in flush_descriptor().

---
 fs/jbd2/revoke.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
fs/jbd2/revoke.c +1 -3
index 3cd73059da9a4..bf2e164d341aa 100644
@@ -637,10 +637,8 @@ static void flush_descriptor(journal_t *journal,
 {
 	jbd2_journal_revoke_header_t *header;
 
-	if (is_journal_aborted(journal)) {
-		put_bh(descriptor);
+	if (is_journal_aborted(journal))
 		return;
-	}
 
 	header = (jbd2_journal_revoke_header_t *)descriptor->b_data;
 	header->r_count = cpu_to_be32(offset);
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 15/20 ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init

In reply to Sasha Levin

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit e1aa1a1db3b01c9890e82cf065cee99962ba1ed9 ]

Fix following lockdep warning disabling bh in
ath_dynack_node_init/ath_dynack_node_deinit

[   75.955878] --------------------------------
[   75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.955905] {SOFTIRQ-ON-W} state was registered at:
[   75.955912]   lock_acquire+0x9a/0x160
[   75.955917]   _raw_spin_lock+0x2c/0x70
[   75.955927]   ath_dynack_node_init+0x2a/0x60 [ath9k_hw]
[   75.955934]   ath9k_sta_state+0xec/0x160 [ath9k]
[   75.955976]   drv_sta_state+0xb2/0x740 [mac80211]
[   75.956008]   sta_info_insert_finish+0x21a/0x420 [mac80211]
[   75.956039]   sta_info_insert_rcu+0x12b/0x2c0 [mac80211]
[   75.956069]   sta_info_insert+0x7/0x70 [mac80211]
[   75.956093]   ieee80211_prep_connection+0x42e/0x730 [mac80211]
[   75.956120]   ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211]
[   75.956152]   cfg80211_mlme_auth+0x143/0x350 [cfg80211]
[   75.956169]   nl80211_authenticate+0x25e/0x2b0 [cfg80211]
[   75.956172]   genl_family_rcv_msg+0x198/0x400
[   75.956174]   genl_rcv_msg+0x42/0x90
[   75.956176]   netlink_rcv_skb+0x35/0xf0
[   75.956178]   genl_rcv+0x1f/0x30
[   75.956180]   netlink_unicast+0x154/0x200
[   75.956182]   netlink_sendmsg+0x1bf/0x3d0
[   75.956186]   ___sys_sendmsg+0x2c2/0x2f0
[   75.956187]   __sys_sendmsg+0x44/0x80
[   75.956190]   do_syscall_64+0x55/0x1a0
[   75.956192]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   75.956194] irq event stamp: 2357092
[   75.956196] hardirqs last  enabled at (2357092): [<ffffffff818c62de>] _raw_spin_unlock_irqrestore+0x3e/0x50
[   75.956199] hardirqs last disabled at (2357091): [<ffffffff818c60b1>] _raw_spin_lock_irqsave+0x11/0x80
[   75.956202] softirqs last  enabled at (2357072): [<ffffffff8106dc09>] irq_enter+0x59/0x60
[   75.956204] softirqs last disabled at (2357073): [<ffffffff8106dcbe>] irq_exit+0xae/0xc0
[   75.956206]
               other info that might help us debug this:
[   75.956207]  Possible unsafe locking scenario:
[   75.956208]        CPU0
[   75.956209]        ----
[   75.956210]   lock(&(&da->qlock)->rlock);
[   75.956213]   <Interrupt>
[   75.956214]     lock(&(&da->qlock)->rlock);
[   75.956216]
                *** DEADLOCK ***
[   75.956217] 1 lock held by swapper/0/0:
[   75.956219]  #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k]
[   75.956225]
               stack backtrace:
[   75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13
[   75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
[   75.956231] Call Trace:
[   75.956233]  <IRQ>
[   75.956236]  dump_stack+0x67/0x90
[   75.956239]  mark_lock+0x4c1/0x640
[   75.956242]  ? check_usage_backwards+0x130/0x130
[   75.956245]  ? sched_clock_local+0x12/0x80
[   75.956247]  __lock_acquire+0x484/0x7a0
[   75.956250]  ? __lock_acquire+0x3b9/0x7a0
[   75.956252]  lock_acquire+0x9a/0x160
[   75.956259]  ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956262]  _raw_spin_lock_bh+0x34/0x80
[   75.956268]  ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956275]  ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956280]  ath_rx_tasklet+0xd09/0xe90 [ath9k]
[   75.956286]  ath9k_tasklet+0x102/0x240 [ath9k]
[   75.956288]  tasklet_action_common.isra.0+0x6d/0x170
[   75.956291]  __do_softirq+0xcc/0x425
[   75.956294]  irq_exit+0xae/0xc0
[   75.956296]  do_IRQ+0x8a/0x110
[   75.956298]  common_interrupt+0xf/0xf
[   75.956300]  </IRQ>
[   75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400
[   75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7
[   75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000
[   75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800
[   75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000
[   75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[   75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800
[   75.956321]  cpuidle_enter+0x24/0x40
[   75.956323]  do_idle+0x1ac/0x220
[   75.956326]  cpu_startup_entry+0x14/0x20
[   75.956329]  start_kernel+0x482/0x489
[   75.956332]  secondary_startup_64+0xa4/0xb0
Fixes c774d57fd47c ("ath9k: add dynamic ACK timeout estimation")
---
 drivers/net/wireless/ath/ath9k/dynack.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath9k/dynack.c +4 -4
index 6e236a4854311..71b4888b30e71 100644
@@ -300,9 +300,9 @@ void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
 
 	an->ackto = ackto;
 
-	spin_lock(&da->qlock);
+	spin_lock_bh(&da->qlock);
 	list_add_tail(&an->list, &da->nodes);
-	spin_unlock(&da->qlock);
+	spin_unlock_bh(&da->qlock);
 }
 EXPORT_SYMBOL(ath_dynack_node_init);
 
@@ -316,9 +316,9 @@ void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an)
 {
 	struct ath_dynack *da = &ah->dynack;
 
-	spin_lock(&da->qlock);
+	spin_lock_bh(&da->qlock);
 	list_del(&an->list);
-	spin_unlock(&da->qlock);
+	spin_unlock_bh(&da->qlock);
 }
 EXPORT_SYMBOL(ath_dynack_node_deinit);
 
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 16/20 Btrfs: fix hang when loading existing inode cache off disk

In reply to Sasha Levin

From: Filipe Manana <[email protected]>

[ Upstream commit 7764d56baa844d7f6206394f21a0e8c1f303c476 ]

If we are able to load an existing inode cache off disk, we set the state of the cache to BTRFS_CACHE_FINISHED, but we don't wake up any one waiting for the cache to be available. This means that anyone waiting for the cache to be available, waiting on the condition that either its state is BTRFS_CACHE_FINISHED or its available free space is greather than zero, can hang forever.

This could be observed running fstests with MOUNT_OPTIONS="-o inode_cache", in particular test case generic/161 triggered it very frequently for me, producing a trace like the following:

  [63795.739712] BTRFS info (device sdc): enabling inode map caching
  [63795.739714] BTRFS info (device sdc): disk space caching is enabled
  [63795.739716] BTRFS info (device sdc): has skinny extents
  [64036.653886] INFO: task btrfs-transacti:3917 blocked for more than 120 seconds.
  [64036.654079]       Not tainted 5.2.0-rc4-btrfs-next-50 #1
  [64036.654143] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [64036.654232] btrfs-transacti D    0  3917      2 0x80004000
  [64036.654239] Call Trace:
  [64036.654258]  ? __schedule+0x3ae/0x7b0
  [64036.654271]  schedule+0x3a/0xb0
  [64036.654325]  btrfs_commit_transaction+0x978/0xae0 [btrfs]
  [64036.654339]  ? remove_wait_queue+0x60/0x60
  [64036.654395]  transaction_kthread+0x146/0x180 [btrfs]
  [64036.654450]  ? btrfs_cleanup_transaction+0x620/0x620 [btrfs]
  [64036.654456]  kthread+0x103/0x140
  [64036.654464]  ? kthread_create_worker_on_cpu+0x70/0x70
  [64036.654476]  ret_from_fork+0x3a/0x50
  [64036.654504] INFO: task xfs_io:3919 blocked for more than 120 seconds.
  [64036.654568]       Not tainted 5.2.0-rc4-btrfs-next-50 #1
  [64036.654617] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [64036.654685] xfs_io          D    0  3919   3633 0x00000000
  [64036.654691] Call Trace:
  [64036.654703]  ? __schedule+0x3ae/0x7b0
  [64036.654716]  schedule+0x3a/0xb0
  [64036.654756]  btrfs_find_free_ino+0xa9/0x120 [btrfs]
  [64036.654764]  ? remove_wait_queue+0x60/0x60
  [64036.654809]  btrfs_create+0x72/0x1f0 [btrfs]
  [64036.654822]  lookup_open+0x6bc/0x790
  [64036.654849]  path_openat+0x3bc/0xc00
  [64036.654854]  ? __lock_acquire+0x331/0x1cb0
  [64036.654869]  do_filp_open+0x99/0x110
  [64036.654884]  ? __alloc_fd+0xee/0x200
  [64036.654895]  ? do_raw_spin_unlock+0x49/0xc0
  [64036.654909]  ? do_sys_open+0x132/0x220
  [64036.654913]  do_sys_open+0x132/0x220
  [64036.654926]  do_syscall_64+0x60/0x1d0
  [64036.654933]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a wake_up() call right after setting the cache state to BTRFS_CACHE_FINISHED, at start_caching(), when we are able to load the cache from disk.

Fixes 82d5902d9c681b ("Btrfs: Support reading/writing on disk free ino cache")
---
 fs/btrfs/inode-map.c | 1 +
 1 file changed, 1 insertion(+)
fs/btrfs/inode-map.c +1 -0
index d27014b8bf727..075b59516c8c0 100644
@@ -159,6 +159,7 @@ static void start_caching(struct btrfs_root *root)
 		spin_lock(&root->ino_cache_lock);
 		root->ino_cache_state = BTRFS_CACHE_FINISHED;
 		spin_unlock(&root->ino_cache_lock);
+		wake_up(&root->ino_cache_wait);
 		return;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 17/20 ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEB

In reply to Sasha Levin

From: Zhihao Cheng <[email protected]>

[ Upstream commit 8615b94f029a4fb4306d3512aaf1c45f5fc24d4b ]

Running stress test io_paral (A pressure ubi test in mtd-utils) on an UBI device with fewer PEBs (fastmap enabled) may cause ENOSPC errors and make UBI device read-only, but there are still free PEBs on the UBI device. This problem can be easily reproduced by performing the following steps on a 2-core machine:

  $ modprobe nandsim first_id_byte=0x20 second_id_byte=0x33 parts=80
  $ modprobe ubi mtd="0,0" fm_autoconvert
  $ ./io_paral /dev/ubi0

We may see the following verbose:
(output)
[io_paral] update_volume():108: failed to write 380 bytes at offset 95920 of volume 2
[io_paral] update_volume():109: update: 97088 bytes [io_paral] write_thread():227: function pwrite() failed with error 28 (No space left on device)
[io_paral] write_thread():229: cannot write 15872 bytes to offs 31744, wrote -1
(dmesg)
ubi0 error: ubi_wl_get_peb [ubi]: Unable to get a free PEB from user WL pool
ubi0 warning: ubi_eba_write_leb [ubi]: switch to read-only mode

  CPU: 0 PID: 2027 Comm: io_paral Not tainted 5.3.0-rc2-00001-g5986cd0 #9
  ubi0 warning: try_write_vid_and_data [ubi]: failed to write VID header
  to LEB 2:5, PEB 18
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0
  -0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  Call Trace:
    dump_stack+0x85/0xba
    ubi_eba_write_leb+0xa1e/0xa40 [ubi]
    vol_cdev_write+0x307/0x520 [ubi]
    vfs_write+0xfa/0x280
    ksys_pwrite64+0xc5/0xe0
    __x64_sys_pwrite64+0x22/0x30
    do_syscall_64+0xbf/0x440

In function ubi_wl_get_peb, the operation of filling the pool (ubi_update_fastmap) with free PEBs and fetching a free PEB from the pool is not atomic. After thread A filling the pool with free PEB, free PEB may be taken away by thread B. When thread A checks the expression again, the condition is still unsatisfactory. At this time, there may still be free PEBs on UBI that can be filled into the pool.

This patch increases the number of attempts to obtain PEB. An extreme case (No free PEBs left after creating test volumes) has been tested on different type of machines for 100 times. The biggest number of attempts are shown below:

             x86_64     arm64
  2-core        4         4
  4-core        8         4
  8-core        4         4
---
 drivers/mtd/ubi/fastmap-wl.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/mtd/ubi/fastmap-wl.c +3 -3
index 69dd21679a30c..99aa30b28e46e 100644
@@ -205,7 +205,7 @@ static int produce_free_peb(struct ubi_device *ubi)
  */
 int ubi_wl_get_peb(struct ubi_device *ubi)
 {
-	int ret, retried = 0;
+	int ret, attempts = 0;
 	struct ubi_fm_pool *pool = &ubi->fm_pool;
 	struct ubi_fm_pool *wl_pool = &ubi->fm_wl_pool;
 
@@ -230,12 +230,12 @@ int ubi_wl_get_peb(struct ubi_device *ubi)
 
 	if (pool->used == pool->size) {
 		spin_unlock(&ubi->wl_lock);
-		if (retried) {
+		attempts++;
+		if (attempts == 10) {
 			ubi_err(ubi, "Unable to get a free PEB from user WL pool");
 			ret = -ENOSPC;
 			goto out;
 		}
-		retried = 1;
 		up_read(&ubi->fm_eba_sem);
 		ret = produce_free_peb(ubi);
 		if (ret < 0) {
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 18/20 RDMA/iwcm: Fix a lock inversion issue

In reply to Sasha Levin

From: Bart Van Assche <[email protected]>

[ Upstream commit b66f31efbdad95ec274345721d99d1d835e6de01 ]

This patch fixes the lock inversion complaint:

============================================
WARNING: possible recursive locking detected
5.3.0-rc7-dbg+ #1 Not tainted
--------------------------------------------
kworker/u16:6/171 is trying to acquire lock:
00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm]

but task is already holding lock:
00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

other info that might help us debug this:

 Possible unsafe locking scenario:
       CPU0
       ----

lock(&id_priv->handler_mutex);
lock(&id_priv->handler_mutex);

*** DEADLOCK ***

May be due to missing lock nesting notation

3 locks held by kworker/u16:6/171:
#0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

stack backtrace:
CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
 dump_stack+0x8a/0xd6
 __lock_acquire.cold+0xe1/0x24d
 lock_acquire+0x106/0x240
 __mutex_lock+0x12e/0xcb0
 mutex_lock_nested+0x1f/0x30
 rdma_destroy_id+0x78/0x4a0 [rdma_cm]
 iw_conn_req_handler+0x5c9/0x680 [rdma_cm]
 cm_work_handler+0xe62/0x1100 [iw_cm]
 process_one_work+0x56d/0xac0
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

This is not a bug as there are actually two lock classes here.

Fixes de910bd92137 ("RDMA/cma: Simplify locking needed for serialization of callbacks")
---
 drivers/infiniband/core/cma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/core/cma.c +2 -1
index 85d4ef319c905..dcfbf326f45c9 100644
@@ -2119,9 +2119,10 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id,
 		conn_id->cm_id.iw = NULL;
 		cma_exch(conn_id, RDMA_CM_DESTROYING);
 		mutex_unlock(&conn_id->handler_mutex);
+		mutex_unlock(&listen_id->handler_mutex);
 		cma_deref_id(conn_id);
 		rdma_destroy_id(&conn_id->id);
-		goto out;
+		return ret;
 	}
 
 	mutex_unlock(&conn_id->handler_mutex);
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 19/20 ipv6: Handle race in addrconf_dad_work

In reply to Sasha Levin

From: David Ahern <[email protected]>

[ Upstream commit a3ce2a21bb8969ae27917281244fa91bf5f286d7 ]

Rajendra reported a kernel panic when a link was taken down:

[ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290

<snip>

[ 6870.570501] Call Trace:
[ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40
[ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0
[ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260
[ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430
[ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430
[ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490
[ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430
[ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0
[ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60
[ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70
[ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0

addrconf_dad_work is kicked to be scheduled when a device is brought up. There is a race between addrcond_dad_work getting scheduled and taking the rtnl lock and a process taking the link down (under rtnl). The latter removes the host route from the inet6_addr as part of addrconf_ifdown which is run for NETDEV_DOWN. The former attempts to use the host route in ipv6_ifa_notify. If the down event removes the host route due to the race to the rtnl, then the BUG listed above occurs.

This scenario does not occur when the ipv6 address is not kept (net.ipv6.conf.all.keep_addr_on_down = 0) as addrconf_ifdown sets the state of the ifp to DEAD. Handle when the addresses are kept by checking IF_READY which is reset by addrconf_ifdown.

The 'dead' flag for an inet6_addr is set only under rtnl, in addrconf_ifdown and it means the device is getting removed (or IPv6 is disabled). The interesting cases for changing the idev flag are addrconf_notify (NETDEV_UP and NETDEV_CHANGE) and addrconf_ifdown (reset the flag). The former does not have the idev lock - only rtnl; the latter has both. Based on that the existing dead + IF_READY check can be moved to right after the rtnl_lock in addrconf_dad_work.

Fixes f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional")
---
 net/ipv6/addrconf.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
net/ipv6/addrconf.c +6 -5
index 6b1310d5e8087..61fd8ff922d97 100644
@@ -3859,6 +3859,12 @@ static void addrconf_dad_work(struct work_struct *w)
 
 	rtnl_lock();
 
+	/* check if device was taken down before this delayed work
+	 * function could be canceled
+	 */
+	if (idev->dead || !(idev->if_flags & IF_READY))
+		goto out;
+
 	spin_lock_bh(&ifp->lock);
 	if (ifp->state == INET6_IFADDR_STATE_PREDAD) {
 		action = DAD_BEGIN;
@@ -3902,11 +3908,6 @@ static void addrconf_dad_work(struct work_struct *w)
 		goto out;
 
 	write_lock_bh(&idev->lock);
-	if (idev->dead || !(idev->if_flags & IF_READY)) {
-		write_unlock_bh(&idev->lock);
-		goto out;
-	}
-
 	spin_lock(&ifp->lock);
 	if (ifp->state == INET6_IFADDR_STATE_DEAD) {
 		spin_unlock(&ifp->lock);
Signature · 1 line
2.20.1
#19 lore raw

Re: [PATCH AUTOSEL 4.9 19/20] ipv6: Handle race in addrconf_dad_work

Quoted 4 lines · Sasha Levin

From: David Ahern <[email protected]>

[ Upstream commit a3ce2a21bb8969ae27917281244fa91bf5f286d7 ]

that patch was reverted in favor of a different solution. It should NOT be backported to any releases.

author maintainer
#20 lore raw

Re: [PATCH AUTOSEL 4.9 19/20] ipv6: Handle race in addrconf_dad_work

Quoted 8 lines · David Ahern
Quoted 4 lines · Sasha Levin

From: David Ahern <[email protected]>

[ Upstream commit a3ce2a21bb8969ae27917281244fa91bf5f286d7 ]

that patch was reverted in favor of a different solution. It should NOT be backported to any releases.

I'll drop it, thank you.

Signature · 2 lines
Thanks,
Sasha
author maintainer
#21 lore raw

PATCH 20/20 bdi: Do not use freezable workqueue

In reply to Sasha Levin

From: Mika Westerberg <[email protected]>

[ Upstream commit a2b90f11217790ec0964ba9c93a4abb369758c26 ]

A removable block device, such as NVMe or SSD connected over Thunderbolt can be hot-removed any time including when the system is suspended. When device is hot-removed during suspend and the system gets resumed, kernel first resumes devices and then thaws the userspace including freezable workqueues. What happens in that case is that the NVMe driver notices that the device is unplugged and removes it from the system. This ends up calling bdi_unregister() for the gendisk which then schedules wb_workfn() to be run one more time.

However, since the bdi_wq is still frozen flush_delayed_work() call in wb_shutdown() blocks forever halting system resume process. User sees this as hang as nothing is happening anymore.

Triggering sysrq-w reveals this:

  Workqueue: nvme-wq nvme_remove_dead_ctrl_work [nvme]
  Call Trace:
   ? __schedule+0x2c5/0x630
   ? wait_for_completion+0xa4/0x120
   schedule+0x3e/0xc0
   schedule_timeout+0x1c9/0x320
   ? resched_curr+0x1f/0xd0
   ? wait_for_completion+0xa4/0x120
   wait_for_completion+0xc3/0x120
   ? wake_up_q+0x60/0x60
   __flush_work+0x131/0x1e0
   ? flush_workqueue_prep_pwqs+0x130/0x130
   bdi_unregister+0xb9/0x130
   del_gendisk+0x2d2/0x2e0
   nvme_ns_remove+0xed/0x110 [nvme_core]
   nvme_remove_namespaces+0x96/0xd0 [nvme_core]
   nvme_remove+0x5b/0x160 [nvme]
   pci_device_remove+0x36/0x90
   device_release_driver_internal+0xdf/0x1c0
   nvme_remove_dead_ctrl_work+0x14/0x30 [nvme]
   process_one_work+0x1c2/0x3f0
   worker_thread+0x48/0x3e0
   kthread+0x100/0x140
   ? current_work+0x30/0x30
   ? kthread_park+0x80/0x80
   ret_from_fork+0x35/0x40

This is not limited to NVMes so exactly same issue can be reproduced by hot-removing SSD (over Thunderbolt) while the system is suspended.

Prevent this from happening by removing WQ_FREEZABLE from bdi_wq.

---
 mm/backing-dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
mm/backing-dev.c +2 -2
index 113b7d3170799..4e1809a2f3889 100644
@@ -245,8 +245,8 @@ static int __init default_bdi_init(void)
 {
 	int err;
 
-	bdi_wq = alloc_workqueue("writeback", WQ_MEM_RECLAIM | WQ_FREEZABLE |
-					      WQ_UNBOUND | WQ_SYSFS, 0);
+	bdi_wq = alloc_workqueue("writeback", WQ_MEM_RECLAIM | WQ_UNBOUND |
+				 WQ_SYSFS, 0);
 	if (!bdi_wq)
 		return -ENOMEM;
 
Signature · 1 line
2.20.1