Skip to contentSkip to conversation

arm64: dts: ls1028a-qds: Remove unnecessary #address-cells/#size-cells

PATCH Applied Fabio Estevam 2 participants 4 messages Oct 26, 2019 – Oct 28, 2019

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/3 arm64: dts: ls1028a-qds: Remove unnecessary #address-cells/#size-cells

The following build warning is seen with W=1:

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts:196.10-208.4: Warning (avoid_unnecessary_addr_size): /soc/i2c@2000000/fpga@66: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Fix it by removing the unnecessary #address-cells/#size-cells.

---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 2 --
 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +0 -2
index d98346da01df..1456d83f2bee 100644
@@ -194,8 +194,6 @@
 	};
 
 	fpga@66 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
 			     "simple-mfd";
 		reg = <0x66>;
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author reviewer
#1 lore raw

PATCH 2/3 arm64: dts: ls1028a: Move thermal-zone out of SoC

Move thermal-zone node from the soc node to the root node.

thermal-zone node does not have any register properties and thus shouldn't be placed on the bus.

This fixes the following build warnings with W=1:

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:583.17-612.5: Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property

---
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 62 +++++++++----------
 1 file changed, 31 insertions(+), 31 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +31 -31
index 51fa8f57fdac..370e9aa07efd 100644
@@ -128,6 +128,37 @@
 		};
 	};
 
+	thermal-zones {
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -580,37 +611,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			core-cluster {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					core_cluster_alert: core-cluster-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					core_cluster_crit: core-cluster-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&core_cluster_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			compatible = "pci-host-ecam-generic";
 			reg = <0x01 0xf0000000 0x0 0x100000>;
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author reviewer
#2 lore raw

PATCH 3/3 arm64: dts: ls1028a: Fix tmu unit address

In reply to Fabio Estevam

The following build warning is seen with W=1:

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:531.20-581.5: Warning (simple_bus_reg): /soc/tmu@1f00000: simple-bus unit address format error, expected "1f80000"

Fix it by adjusting the tmu unit address to match its reg entry.

---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +1 -1
index 370e9aa07efd..b32830f83da2 100644
@@ -559,7 +559,7 @@
 			status = "disabled";
 		};
 
-		tmu: tmu@1f00000 {
+		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied
#3 lore raw
In reply to Fabio Estevam
Quoted 7 lines · Fabio Estevam

The following build warning is seen with W=1:

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts:196.10-208.4: Warning (avoid_unnecessary_addr_size): /soc/i2c@2000000/fpga@66: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Fix it by removing the unnecessary #address-cells/#size-cells.

Applied all, thanks.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel