Skip to contentSkip to conversation

Add Beelink GS1 board

PATCH Superseded Clément Péron 3 participants 11 messages Sep 20, 2019 – Oct 27, 2019 Arm/Allwinner sunXi SoC support

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Add Beelink GS1 board

Hi,

Beelink GS1 is a TV box based on Allwinner H6.

It requires one patch for a working reboot in ARM ATF and one patch in U-boot to avoid random mac.

Patches 2 and 3, are optional and I don't think it should be merge.

Regards,
Cl?ment

Cl?ment P?ron (3):
board: add Beelink GS1 support
[DO NOT MERGE] board/beelink_gs1: enable mdev, dropbear and auto-ssh [DO NOT MERGE] board/beelink_gs1: add root passwd and eth0 auto

 board/beelink/gs1/extlinux.conf               |   4 +
 board/beelink/gs1/genimage.cfg                |  33 +++
 ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
 ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++
 board/beelink/gs1/post-build.sh               |   4 +
 .../gs1/rootfs_overlay/etc/network/interfaces |   7 +
 configs/beelink_gs1_defconfig                 |  40 +++
 7 files changed, 406 insertions(+)
 create mode 100644 board/beelink/gs1/extlinux.conf
 create mode 100644 board/beelink/gs1/genimage.cfg
 create mode 100644 board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch
 create mode 100644 board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
 create mode 100755 board/beelink/gs1/post-build.sh
 create mode 100644 board/beelink/gs1/rootfs_overlay/etc/network/interfaces
 create mode 100644 configs/beelink_gs1_defconfig
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/3 board: add Beelink GS1 support

---
 board/beelink/gs1/extlinux.conf               |   4 +
 board/beelink/gs1/genimage.cfg                |  33 +++
 ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
 ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++
 board/beelink/gs1/post-build.sh               |   4 +
 configs/beelink_gs1_defconfig                 |  35 +++
 6 files changed, 394 insertions(+)
 create mode 100644 board/beelink/gs1/extlinux.conf
 create mode 100644 board/beelink/gs1/genimage.cfg
 create mode 100644 board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch
 create mode 100644 board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch
 create mode 100755 board/beelink/gs1/post-build.sh
 create mode 100644 configs/beelink_gs1_defconfig
board/beelink/gs1/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..046681f71d
@@ -0,0 +1,4 @@
+label linux
+  kernel /Image
+  devicetree /sun50i-h6-beelink-gs1.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
board/beelink/gs1/genimage.cfg new file +33 -0
new file mode 100644
index 0000000000..88bbd26594
@@ -0,0 +1,33 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h6-beelink-gs1.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8192
+		size = 1040384 # 1MB - 8192
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch new file +39 -0
new file mode 100644
index 0000000000..9443fdd568
@@ -0,0 +1,39 @@
+From 523ab5be1a84e9aa15fb62c3a15a6338b01d3961 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <[email protected]>
+Date: Tue, 9 Apr 2019 00:15:06 +0200
+Subject: [PATCH] plat: allwinner: common: use r_wdog instead of wdog
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Some Allwinner H6 has a broken watchdog that doesn't
+make the soc reboot.
+
+Use the R_WATCHDOG instead.
+
+Signed-off-by: Cl?ment P?ron <[email protected]>
+Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba
+---
+ plat/allwinner/common/sunxi_pm.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/plat/allwinner/common/sunxi_pm.c b/plat/allwinner/common/sunxi_pm.c
+index 1d2dc938..13e13532 100644
+--- a/plat/allwinner/common/sunxi_pm.c
++++ b/plat/allwinner/common/sunxi_pm.c
+@@ -20,9 +20,9 @@
+ #include <sunxi_mmap.h>
+ #include <sunxi_private.h>
+ 
+-#define SUNXI_WDOG0_CTRL_REG		(SUNXI_WDOG_BASE + 0x0010)
+-#define SUNXI_WDOG0_CFG_REG		(SUNXI_WDOG_BASE + 0x0014)
+-#define SUNXI_WDOG0_MODE_REG		(SUNXI_WDOG_BASE + 0x0018)
++#define SUNXI_WDOG0_CTRL_REG		(SUNXI_R_WDOG_BASE + 0x0010)
++#define SUNXI_WDOG0_CFG_REG		(SUNXI_R_WDOG_BASE + 0x0014)
++#define SUNXI_WDOG0_MODE_REG		(SUNXI_R_WDOG_BASE + 0x0018)
+ 
+ #define mpidr_is_valid(mpidr) ( \
+ 	MPIDR_AFFLVL3_VAL(mpidr) == 0 && \
+-- 
+2.20.1
+
board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch new file +279 -0

279 lines not on this page · raw message

board/beelink/gs1/post-build.sh new file +4 -0
new file mode 100755
index 0000000000..ec20fca7d9
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
configs/beelink_gs1_defconfig new file +35 -0
new file mode 100644
index 0000000000..d1a21a4a6d
@@ -0,0 +1,35 @@
+# Architecture
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
+BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beelink_gs1"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
Signature · 1 line
2.20.1
#2 lore raw

PATCH 1/3 board: add Beelink GS1 support

Hello Cl?ment,

Sorry for the slow feedback.

Quoted 4 lines · On Fri, 20 Sep 2019 21:08:11 +0200 Cl?ment P?ron <[email protected]> wrote:
 board/beelink/gs1/extlinux.conf               |   4 +
 board/beelink/gs1/genimage.cfg                |  33 +++
 ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
 ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++

Perhaps these patches have been merged upstream now ?

Quoted 7 lines
configs/beelink_gs1_defconfig new file +1 -0
new file mode 100644
index 0000000000..d1a21a4a6d
@@ -0,0 +1,35 @@
+# Architecture

configs/beelink_gs1_defconfig line 11

Quoted 10 lines
configs/beelink_gs1_defconfig new file +10 -0
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
+BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
+
+# Kernel
+BR2_LINUX_KERNEL=y

Please define an explicit kernel version, so that it is using a known working version.

Quoted 5 lines
configs/beelink_gs1_defconfig new file +5 -0
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y

configs/beelink_gs1_defconfig line 26

Quoted 10 lines
configs/beelink_gs1_defconfig new file +10 -0
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+
+# Bootloader
+BR2_TARGET_UBOOT=y

Please define an explicit U-Boot version, for the same reason as above.

Also, please add yourself in the DEVELOPERS file, for both the defconfig and the board folder you're adding.

Could you send a v2 fixing those details ?

Thanks a lot!

Thomas Petazzoni

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH 1/3 board: add Beelink GS1 support

Hello Thomas,

Quoted 8 lines · Thomas Petazzoni

Hello Cl?ment,

Sorry for the slow feedback.

On Fri, 20 Sep 2019 21:08:11 +0200
Cl?ment P?ron <[email protected]> wrote:

Quoted 6 lines
Quoted 4 lines
 board/beelink/gs1/extlinux.conf               |   4 +
 board/beelink/gs1/genimage.cfg                |  33 +++
 ...er-common-use-r_wdog-instead-of-wdog.patch |  39 +++
 ...01-arm-dts-sync-dts-for-Allwinner-H6.patch | 279 ++++++++++++++++++

Perhaps these patches have been merged upstream now ?

One has been merged in A-TF v2.2 which is one week old. I didn't have time to test it right now

The second is still not merged in U-boot 2019.10

Quoted 13 lines
Quoted 13 lines
configs/beelink_gs1_defconfig new file +6 -0
new file mode 100644
index 0000000000..d1a21a4a6d
@@ -0,0 +1,35 @@
+# Architecture
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
Quoted 8 lines

configs/beelink_gs1_defconfig line 11

Quoted 5 lines
configs/beelink_gs1_defconfig new file +5 -0
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
+BR2_GLOBAL_PATCH_DIR="board/beelink/gs1/patches/"
+
+# Kernel
+BR2_LINUX_KERNEL=y

Please define an explicit kernel version, so that it is using a known working version.

OK

Quoted 10 lines
Quoted 10 lines
configs/beelink_gs1_defconfig new file +9 -0
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
Quoted 8 lines

configs/beelink_gs1_defconfig line 26

Quoted 6 lines
configs/beelink_gs1_defconfig new file +6 -0
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+
+# Bootloader
+BR2_TARGET_UBOOT=y

Please define an explicit U-Boot version, for the same reason as above.

OK

Quoted 5 lines

Also, please add yourself in the DEVELOPERS file, for both the defconfig and the board folder you're adding.

Could you send a v2 fixing those details ?

Yes,

Do you think the other patches can be merged too or are they to "user-specific" ?

Quoted 2 lines

Thanks a lot!

Thanks for the review,

Quoted 6 lines

Thomas Petazzoni
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

#4 lore raw

PATCH 1/3 board: add Beelink GS1 support

Quoted 2 lines · On Sat, 26 Oct 2019 10:56:02 +0200 Cl?ment P?ron <[email protected]> wrote:

Do you think the other patches can be merged too or are they to "user-specific" ?

As Arnout said, PATCH 3/3, for the part that enables DHCP on eth0, can be added using BR2_SYSTEM_DHCP="eth0". This is acceptable upstream.

Customizing the root password is not, as is adding autossh and dropbear.

Adding mdev could be acceptable, for example if it's needed to load some kernel modules.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#5 lore raw

PATCH 1/3 board: add Beelink GS1 support

Quoted 7 lines · Thomas Petazzoni
Quoted 2 lines · On Sat, 26 Oct 2019 10:56:02 +0200 Cl?ment P?ron <[email protected]> wrote:

Do you think the other patches can be merged too or are they to "user-specific" ?

Quoted 7 lines

As Arnout said, PATCH 3/3, for the part that enables DHCP on eth0, can be added using BR2_SYSTEM_DHCP="eth0". This is acceptable upstream.

Customizing the root password is not, as is adding autossh and dropbear.

Adding mdev could be acceptable, for example if it's needed to load some kernel modules.

Yes it is,

Thanks
Cl?ment

Quoted 8 lines

Best regards,

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

#6 lore raw

PATCH 1/3 board: add Beelink GS1 support

Quoted 9 lines · Cl?ment P?ron
Quoted 7 lines · Thomas Petazzoni
Quoted 2 lines · On Sat, 26 Oct 2019 10:56:02 +0200 Cl?ment P?ron <[email protected]> wrote:

Do you think the other patches can be merged too or are they to "user-specific" ?

Quoted 8 lines
Quoted 7 lines

As Arnout said, PATCH 3/3, for the part that enables DHCP on eth0, can be added using BR2_SYSTEM_DHCP="eth0". This is acceptable upstream.

Customizing the root password is not, as is adding autossh and dropbear.

Adding mdev could be acceptable, for example if it's needed to load some kernel modules.

Yes it is,

It helps if you put a comment in the defconfig that says why it is needed (e.g.
"to autoload ethernet driver module").

Regards,
Arnout

#7 lore raw

PATCH 2/3 board/beelink_gs1: enable mdev, dropbear and auto-ssh

In reply to Clément Péron
---
 configs/beelink_gs1_defconfig | 3 +++
 1 file changed, 3 insertions(+)
configs/beelink_gs1_defconfig +3 -0
index d1a21a4a6d..ccf4771cc7 100644
@@ -2,6 +2,7 @@
 BR2_aarch64=y
 BR2_ARM_FPU_VFPV4=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
@@ -13,6 +14,8 @@ BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-beelink-gs1"
 BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_AUTOSSH=y
+BR2_PACKAGE_DROPBEAR=y
 BR2_TARGET_ROOTFS_EXT2=y
 BR2_TARGET_ROOTFS_EXT2_4=y
 
Signature · 1 line
2.20.1
#8 lore raw

PATCH 3/3 board/beelink_gs1: add root passwd and eth0 auto

In reply to Clément Péron
---
 board/beelink/gs1/rootfs_overlay/etc/network/interfaces | 7 +++++++
 configs/beelink_gs1_defconfig                           | 2 ++
 2 files changed, 9 insertions(+)
 create mode 100644 board/beelink/gs1/rootfs_overlay/etc/network/interfaces
board/beelink/gs1/rootfs_overlay/etc/network/interfaces new file +7 -0
new file mode 100644
index 0000000000..0af5845617
@@ -0,0 +1,7 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure eth0 with DHCP
+auto eth0
+iface eth0 inet dhcp
configs/beelink_gs1_defconfig +2 -0
index ccf4771cc7..4794df7914 100644
@@ -3,6 +3,8 @@ BR2_aarch64=y
 BR2_ARM_FPU_VFPV4=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_TARGET_GENERIC_ROOT_PASSWD="admin"
+BR2_ROOTFS_OVERLAY="board/beelink/gs1/rootfs_overlay"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
Signature · 1 line
2.20.1
#9 lore raw

PATCH 3/3 board/beelink_gs1: add root passwd and eth0 auto

Quoted 13 lines · Cl?ment P?ron
---
 board/beelink/gs1/rootfs_overlay/etc/network/interfaces | 7 +++++++
 configs/beelink_gs1_defconfig                           | 2 ++
 2 files changed, 9 insertions(+)
 create mode 100644 board/beelink/gs1/rootfs_overlay/etc/network/interfaces
board/beelink/gs1/rootfs_overlay/etc/network/interfaces new file +0 -0
new file mode 100644
index 0000000000..0af5845617

board/beelink/gs1/rootfs_overlay/etc/network/interfaces line 7

Quoted 7 lines
board/beelink/gs1/rootfs_overlay/etc/network/interfaces new file +7 -0
@@ -0,0 +1,7 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure eth0 with DHCP
+auto eth0
+iface eth0 inet dhcp

Doesn't BR2_SYSTEM_DHCP="eth0" work? We do that in a lot of other defconfigs.

Regards,
Arnout

Quoted 14 lines
configs/beelink_gs1_defconfig +2 -0
index ccf4771cc7..4794df7914 100644
@@ -3,6 +3,8 @@ BR2_aarch64=y
 BR2_ARM_FPU_VFPV4=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_TARGET_GENERIC_ROOT_PASSWD="admin"
+BR2_ROOTFS_OVERLAY="board/beelink/gs1/rootfs_overlay"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"
#10 lore raw

PATCH 3/3 board/beelink_gs1: add root passwd and eth0 auto

Hi Arnout,

Quoted 11 lines · Arnout Vandecappelle
Quoted 7 lines · Cl?ment P?ron
---
 board/beelink/gs1/rootfs_overlay/etc/network/interfaces | 7 +++++++
 configs/beelink_gs1_defconfig                           | 2 ++
 2 files changed, 9 insertions(+)
 create mode 100644 board/beelink/gs1/rootfs_overlay/etc/network/interfaces
Quoted 15 lines

board/beelink/gs1/rootfs_overlay/etc/network/interfaces line 7

Quoted 13 lines
board/beelink/gs1/rootfs_overlay/etc/network/interfaces new file +7 -0
new file mode 100644
index 0000000000..0af5845617
@@ -0,0 +1,7 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure eth0 with DHCP
+auto eth0
+iface eth0 inet dhcp

Doesn't BR2_SYSTEM_DHCP="eth0" work? We do that in a lot of other defconfigs.

Thanks for the tips, I didn't know about this option.

Regards,
Cl?ment

Quoted 18 lines

Regards,
Arnout

Quoted 14 lines
configs/beelink_gs1_defconfig +2 -0
index ccf4771cc7..4794df7914 100644
@@ -3,6 +3,8 @@ BR2_aarch64=y
 BR2_ARM_FPU_VFPV4=y
 BR2_TARGET_GENERIC_ISSUE="Welcome to Beelink GS1"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_TARGET_GENERIC_ROOT_PASSWD="admin"
+BR2_ROOTFS_OVERLAY="board/beelink/gs1/rootfs_overlay"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/beelink/gs1/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beelink/gs1/genimage.cfg"