Skip to contentSkip to conversation

iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context

PATCH New Sasha Levin 1 participant 21 messages Oct 26, 2019

Subsystems (6)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/21 iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context

From: Liu Xiang <[email protected]>

[ Upstream commit 6db7bfb431220d78e34d2d0afdb7c12683323588 ]

When alloc_io_pgtable_ops is failed, context bitmap which is just allocated by __arm_smmu_alloc_bitmap should be freed to release the resource.

---
 drivers/iommu/arm-smmu.c | 1 +
 1 file changed, 1 insertion(+)
drivers/iommu/arm-smmu.c +1 -0
index f7ecb30a0bac8..5b3124eb184e7 100644
@@ -968,6 +968,7 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
 	return 0;
 
 out_clear_smmu:
+	__arm_smmu_free_bitmap(smmu->context_map, cfg->cbndx);
 	smmu_domain->smmu = NULL;
 out_unlock:
 	mutex_unlock(&smmu_domain->init_mutex);
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#1 lore raw

PATCH 2/21 mac80211_hwsim: fix incorrect dev_alloc_name failure goto

From: Michael Vassernis <[email protected]>

[ Upstream commit 313c3fe9c2348e7147eca38bb446f295b45403a0 ]

If dev_alloc_name fails, hwsim_mon's memory allocated in alloc_netdev needs to be freed.
Change goto command in dev_alloc_name failure to out_free_mon in order to perform free_netdev.

---
 drivers/net/wireless/mac80211_hwsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mac80211_hwsim.c +1 -1
index e9ec1da9935d8..0651a323b64f1 100644
@@ -3502,7 +3502,7 @@ static int __init init_mac80211_hwsim(void)
 	err = dev_alloc_name(hwsim_mon, hwsim_mon->name);
 	if (err < 0) {
 		rtnl_unlock();
-		goto out_free_radios;
+		goto out_free_mon;
 	}
 
 	err = register_netdevice(hwsim_mon);
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/21 nvme: retain split access workaround for capability reads

In reply to Sasha Levin

From: Ard Biesheuvel <[email protected]>

[ Upstream commit 3a8ecc935efabdad106b5e06d07b150c394b4465 ]

Commit 7fd8930f26be4

"nvme: add a common helper to read Identify Controller data"

has re-introduced an issue that we have attempted to work around in the past, in commit a310acd7a7ea ("NVMe: use split lo_hi_{read,write}q").

The problem is that some PCIe NVMe controllers do not implement 64-bit outbound accesses correctly, which is why the commit above switched to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in the code.

In the mean time, the NVMe subsystem has been refactored, and now calls into the PCIe support layer for NVMe via a .reg_read64() method, which fails to use lo_hi_readq(), and thus reintroduces the problem that the workaround above aimed to address.

Given that, at the moment, .reg_read64() is only used to read the capability register [which is known to tolerate split reads], let's switch .reg_read64() to lo_hi_readq() as well.

This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys DesignWare PCIe host controller.

Fixes 7fd8930f26be4 ("nvme: add a common helper to read Identify Controller data")
---
 drivers/nvme/host/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nvme/host/pci.c +1 -1
index 1ac4cec5f4f7c..e2bce9385eda6 100644
@@ -1863,7 +1863,7 @@ static int nvme_pci_reg_write32(struct nvme_ctrl *ctrl, u32 off, u32 val)
 
 static int nvme_pci_reg_read64(struct nvme_ctrl *ctrl, u32 off, u64 *val)
 {
-	*val = readq(to_nvme_dev(ctrl)->bar + off);
+	*val = lo_hi_readq(to_nvme_dev(ctrl)->bar + off);
 	return 0;
 }
 
Signature · 7 lines
2.20.1


_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
author maintainer
#3 lore raw

PATCH 4/21 net: stmmac: gmac4+: Not all Unicast addresses may be available

In reply to Sasha Levin

From: Jose Abreu <[email protected]>

[ Upstream commit 25683bab09a70542b9f8e3e28f79b3369e56701f ]

Some setups may not have all Unicast addresses filters available. Check the number of available filters before trying to setup it.

Fixes 477286b53f55 ("stmmac: add GMAC4 core support")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +1 -1
index f46f2bfc2cc09..4216c0a5eaf5a 100644
@@ -168,7 +168,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 	}
 
 	/* Handle multiple unicast addresses */
-	if (netdev_uc_count(dev) > GMAC_MAX_PERFECT_ADDRESSES) {
+	if (netdev_uc_count(dev) > hw->unicast_filter_entries) {
 		/* Switch to promiscuous mode if more than 128 addrs
 		 * are required
 		 */
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/21 mac80211: accept deauth frames in IBSS mode

In reply to Sasha Levin

From: Johannes Berg <[email protected]>

[ Upstream commit 95697f9907bfe3eab0ef20265a766b22e27dde64 ]

We can process deauth frames and all, but we drop them very early in the RX path today - this could never have worked.

Fixes 2cc59e784b54 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS")
---
 net/mac80211/rx.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
net/mac80211/rx.c +10 -1
index 3b423c50ec8fa..74652eb2f90fd 100644
@@ -3205,9 +3205,18 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
 	case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
 		/* process for all: mesh, mlme, ibss */
 		break;
+	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+		if (is_multicast_ether_addr(mgmt->da) &&
+		    !is_broadcast_ether_addr(mgmt->da))
+			return RX_DROP_MONITOR;
+
+		/* process only for station/IBSS */
+		if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+		    sdata->vif.type != NL80211_IFTYPE_ADHOC)
+			return RX_DROP_MONITOR;
+		break;
 	case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
 	case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
-	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
 	case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
 		if (is_multicast_ether_addr(mgmt->da) &&
 		    !is_broadcast_ether_addr(mgmt->da))
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/21 llc: fix sk_buff leak in llc_sap_state_process()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit c6ee11c39fcc1fb55130748990a8f199e76263b4 ]

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff888116270800 (size 224):
       comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff  . .*.....@=*....
       backtrace:
         [<000000004d41b4cc>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250  net/core/skbuff.c:5327
         [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0  net/core/sock.c:2225
         [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242
         [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933
         [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline]
         [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671
         [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964
	 [...]

The bug is that llc_sap_state_process() always takes an extra reference to the skb, but sometimes neither llc_sap_next_state() nor llc_sap_state_process() itself drops this reference.

Fix it by changing llc_sap_next_state() to never consume a reference to the skb, rather than sometimes do so and sometimes not. Then remove the extra skb_get() and kfree_skb() from llc_sap_state_process().

Reported-by [email protected]
Reported-by [email protected]
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/llc_s_ac.c | 12 +++++++++---
 net/llc/llc_sap.c  | 23 ++++++++---------------
 2 files changed, 17 insertions(+), 18 deletions(-)
net/llc/llc_s_ac.c +9 -3
index a94bd56bcac6f..7ae4cc684d3ab 100644
@@ -58,8 +58,10 @@ int llc_sap_action_send_ui(struct llc_sap *sap, struct sk_buff *skb)
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_ui_cmd(skb);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
@@ -81,8 +83,10 @@ int llc_sap_action_send_xid_c(struct llc_sap *sap, struct sk_buff *skb)
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_xid_cmd(skb, LLC_XID_NULL_CLASS_2, 0);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
@@ -135,8 +139,10 @@ int llc_sap_action_send_test_c(struct llc_sap *sap, struct sk_buff *skb)
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_test_cmd(skb);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
net/llc/llc_sap.c +8 -15
index 5404d0d195cc5..d51ff9df9c959 100644
@@ -197,29 +197,22 @@ static int llc_sap_next_state(struct llc_sap *sap, struct sk_buff *skb)
  *	After executing actions of the event, upper layer will be indicated
  *	if needed(on receiving an UI frame). sk can be null for the
  *	datalink_proto case.
+ *
+ *	This function always consumes a reference to the skb.
  */
 static void llc_sap_state_process(struct llc_sap *sap, struct sk_buff *skb)
 {
 	struct llc_sap_state_ev *ev = llc_sap_ev(skb);
 
-	/*
-	 * We have to hold the skb, because llc_sap_next_state
-	 * will kfree it in the sending path and we need to
-	 * look at the skb->cb, where we encode llc_sap_state_ev.
-	 */
-	skb_get(skb);
 	ev->ind_cfm_flag = 0;
 	llc_sap_next_state(sap, skb);
-	if (ev->ind_cfm_flag == LLC_IND) {
-		if (skb->sk->sk_state == TCP_LISTEN)
-			kfree_skb(skb);
-		else {
-			llc_save_primitive(skb->sk, skb, ev->prim);
 
-			/* queue skb to the user. */
-			if (sock_queue_rcv_skb(skb->sk, skb))
-				kfree_skb(skb);
-		}
+	if (ev->ind_cfm_flag == LLC_IND && skb->sk->sk_state != TCP_LISTEN) {
+		llc_save_primitive(skb->sk, skb, ev->prim);
+
+		/* queue skb to the user. */
+		if (sock_queue_rcv_skb(skb->sk, skb) == 0)
+			return;
 	}
 	kfree_skb(skb);
 }
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/21 llc: fix sk_buff leak in llc_conn_service()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit b74555de21acd791f12c4a1aeaf653dd7ac21133 ]

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff88811eb3de00 (size 224):
       comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff  ..8$............
       backtrace:
         [<000000008d1c66a1>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54
         [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140  net/llc/llc_c_ac.c:777
         [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475  [inline]
         [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline]
         [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640  net/llc/llc_conn.c:75
         [<00000000f27e53c1>] llc_establish_connection+0x110/0x170  net/llc/llc_if.c:109
         [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477
         [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840
         [...]

The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c3f81 ("llc:
properly handle dev_queue_xmit() return value") it doesn't.

Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before.

Fixes b85ab56c3f81 ("llc: properly handle dev_queue_xmit() return value")
Reported-by [email protected]
---
 include/net/llc_conn.h |  2 +-
 net/llc/llc_c_ac.c     |  8 ++++++--
 net/llc/llc_conn.c     | 32 +++++++++-----------------------
 3 files changed, 16 insertions(+), 26 deletions(-)
include/net/llc_conn.h +1 -1
index df528a6235487..ea985aa7a6c5e 100644
@@ -104,7 +104,7 @@ void llc_sk_reset(struct sock *sk);
 
 /* Access to a connection */
 int llc_conn_state_process(struct sock *sk, struct sk_buff *skb);
-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
+void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit);
 void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit);
net/llc/llc_c_ac.c +6 -2
index 4b60f68cb4925..8354ae40ec85b 100644
@@ -372,6 +372,7 @@ int llc_conn_ac_send_i_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
 	llc_pdu_init_as_i_cmd(skb, 1, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
+		skb_get(skb);
 		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
@@ -389,7 +390,8 @@ static int llc_conn_ac_send_i_cmd_p_set_0(struct sock *sk, struct sk_buff *skb)
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		rc = llc_conn_send_pdu(sk, skb);
+		skb_get(skb);
+		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
@@ -406,6 +408,7 @@ int llc_conn_ac_send_i_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
+		skb_get(skb);
 		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
@@ -916,7 +919,8 @@ static int llc_conn_ac_send_i_rsp_f_set_ackpf(struct sock *sk,
 	llc_pdu_init_as_i_cmd(skb, llc->ack_pf, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		rc = llc_conn_send_pdu(sk, skb);
+		skb_get(skb);
+		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
net/llc/llc_conn.c +9 -23
index b9290a183a2fd..94c78cc49d3e0 100644
@@ -30,7 +30,7 @@
 #endif
 
 static int llc_find_offset(int state, int ev_type);
-static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *skb);
+static void llc_conn_send_pdus(struct sock *sk);
 static int llc_conn_service(struct sock *sk, struct sk_buff *skb);
 static int llc_exec_conn_trans_actions(struct sock *sk,
 				       struct llc_conn_state_trans *trans,
@@ -193,11 +193,11 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 	return rc;
 }
 
-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
+void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
 {
 	/* queue PDU to send to MAC layer */
 	skb_queue_tail(&sk->sk_write_queue, skb);
-	return llc_conn_send_pdus(sk, skb);
+	llc_conn_send_pdus(sk);
 }
 
 /**
@@ -255,7 +255,7 @@ void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit)
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk, NULL);
+	llc_conn_send_pdus(sk);
 out:;
 }
 
@@ -296,7 +296,7 @@ void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit)
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk, NULL);
+	llc_conn_send_pdus(sk);
 out:;
 }
 
@@ -340,16 +340,12 @@ int llc_conn_remove_acked_pdus(struct sock *sk, u8 nr, u16 *how_many_unacked)
 /**
  *	llc_conn_send_pdus - Sends queued PDUs
  *	@sk: active connection
- *	@hold_skb: the skb held by caller, or NULL if does not care
  *
- *	Sends queued pdus to MAC layer for transmission. When @hold_skb is
- *	NULL, always return 0. Otherwise, return 0 if @hold_skb is sent
- *	successfully, or 1 for failure.
+ *	Sends queued pdus to MAC layer for transmission.
  */
-static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb)
+static void llc_conn_send_pdus(struct sock *sk)
 {
 	struct sk_buff *skb;
-	int ret = 0;
 
 	while ((skb = skb_dequeue(&sk->sk_write_queue)) != NULL) {
 		struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -361,20 +357,10 @@ static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb)
 			skb_queue_tail(&llc_sk(sk)->pdu_unack_q, skb);
 			if (!skb2)
 				break;
-			dev_queue_xmit(skb2);
-		} else {
-			bool is_target = skb == hold_skb;
-			int rc;
-
-			if (is_target)
-				skb_get(skb);
-			rc = dev_queue_xmit(skb);
-			if (is_target)
-				ret = rc;
+			skb = skb2;
 		}
+		dev_queue_xmit(skb);
 	}
-
-	return ret;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/21 llc: fix another potential sk_buff leak in llc_ui_sendmsg()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit fc8d5db10cbe1338a52ebc74e7feab9276721774 ]

All callers of llc_conn_state_process() except llc_build_and_send_pkt() (via llc_ui_sendmsg() -> llc_ui_send_data()) assume that it always consumes a reference to the skb. Fix this caller to do the same.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/af_llc.c   | 34 ++++++++++++++++++++--------------
 net/llc/llc_conn.c |  2 ++
 net/llc/llc_if.c   | 12 ++++++++----
 3 files changed, 30 insertions(+), 18 deletions(-)
net/llc/af_llc.c +20 -14
index 789e66b0187a4..2a859f967c8af 100644
@@ -111,22 +111,26 @@ static inline u8 llc_ui_header_len(struct sock *sk, struct sockaddr_llc *addr)
  *
  *	Send data via reliable llc2 connection.
  *	Returns 0 upon success, non-zero if action did not succeed.
+ *
+ *	This function always consumes a reference to the skb.
  */
 static int llc_ui_send_data(struct sock* sk, struct sk_buff *skb, int noblock)
 {
 	struct llc_sock* llc = llc_sk(sk);
-	int rc = 0;
 
 	if (unlikely(llc_data_accept_state(llc->state) ||
 		     llc->remote_busy_flag ||
 		     llc->p_flag)) {
 		long timeout = sock_sndtimeo(sk, noblock);
+		int rc;
 
 		rc = llc_ui_wait_for_busy_core(sk, timeout);
+		if (rc) {
+			kfree_skb(skb);
+			return rc;
+		}
 	}
-	if (unlikely(!rc))
-		rc = llc_build_and_send_pkt(sk, skb);
-	return rc;
+	return llc_build_and_send_pkt(sk, skb);
 }
 
 static void llc_ui_sk_init(struct socket *sock, struct sock *sk)
@@ -896,7 +900,7 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	DECLARE_SOCKADDR(struct sockaddr_llc *, addr, msg->msg_name);
 	int flags = msg->msg_flags;
 	int noblock = flags & MSG_DONTWAIT;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
 	size_t size = 0;
 	int rc = -EINVAL, copied = 0, hdrlen;
 
@@ -905,10 +909,10 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	lock_sock(sk);
 	if (addr) {
 		if (msg->msg_namelen < sizeof(*addr))
-			goto release;
+			goto out;
 	} else {
 		if (llc_ui_addr_null(&llc->addr))
-			goto release;
+			goto out;
 		addr = &llc->addr;
 	}
 	/* must bind connection to sap if user hasn't done it. */
@@ -916,7 +920,7 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 		/* bind to sap with null dev, exclusive. */
 		rc = llc_ui_autobind(sock, addr);
 		if (rc)
-			goto release;
+			goto out;
 	}
 	hdrlen = llc->dev->hard_header_len + llc_ui_header_len(sk, addr);
 	size = hdrlen + len;
@@ -925,12 +929,12 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	copied = size - hdrlen;
 	rc = -EINVAL;
 	if (copied < 0)
-		goto release;
+		goto out;
 	release_sock(sk);
 	skb = sock_alloc_send_skb(sk, size, noblock, &rc);
 	lock_sock(sk);
 	if (!skb)
-		goto release;
+		goto out;
 	skb->dev      = llc->dev;
 	skb->protocol = llc_proto_type(addr->sllc_arphrd);
 	skb_reserve(skb, hdrlen);
@@ -940,29 +944,31 @@ static int llc_ui_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	if (sk->sk_type == SOCK_DGRAM || addr->sllc_ua) {
 		llc_build_and_send_ui_pkt(llc->sap, skb, addr->sllc_mac,
 					  addr->sllc_sap);
+		skb = NULL;
 		goto out;
 	}
 	if (addr->sllc_test) {
 		llc_build_and_send_test_pkt(llc->sap, skb, addr->sllc_mac,
 					    addr->sllc_sap);
+		skb = NULL;
 		goto out;
 	}
 	if (addr->sllc_xid) {
 		llc_build_and_send_xid_pkt(llc->sap, skb, addr->sllc_mac,
 					   addr->sllc_sap);
+		skb = NULL;
 		goto out;
 	}
 	rc = -ENOPROTOOPT;
 	if (!(sk->sk_type == SOCK_STREAM && !addr->sllc_ua))
 		goto out;
 	rc = llc_ui_send_data(sk, skb, noblock);
+	skb = NULL;
 out:
-	if (rc) {
-		kfree_skb(skb);
-release:
+	kfree_skb(skb);
+	if (rc)
 		dprintk("%s: failed sending from %02X to %02X: %d\n",
 			__func__, llc->laddr.lsap, llc->daddr.lsap, rc);
-	}
 	release_sock(sk);
 	return rc ? : copied;
 }
net/llc/llc_conn.c +2 -0
index 94c78cc49d3e0..2689e95471dc4 100644
@@ -55,6 +55,8 @@ int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
  *	(executing it's actions and changing state), upper layer will be
  *	indicated or confirmed, if needed. Returns 0 for success, 1 for
  *	failure. The socket lock has to be held before calling this function.
+ *
+ *	This function always consumes a reference to the skb.
  */
 int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 {
net/llc/llc_if.c +8 -4
index 6daf391b3e847..fc4d2bd8816f5 100644
@@ -38,6 +38,8 @@
  *	closed and -EBUSY when sending data is not permitted in this state or
  *	LLC has send an I pdu with p bit set to 1 and is waiting for it's
  *	response.
+ *
+ *	This function always consumes a reference to the skb.
  */
 int llc_build_and_send_pkt(struct sock *sk, struct sk_buff *skb)
 {
@@ -46,20 +48,22 @@ int llc_build_and_send_pkt(struct sock *sk, struct sk_buff *skb)
 	struct llc_sock *llc = llc_sk(sk);
 
 	if (unlikely(llc->state == LLC_CONN_STATE_ADM))
-		goto out;
+		goto out_free;
 	rc = -EBUSY;
 	if (unlikely(llc_data_accept_state(llc->state) || /* data_conn_refuse */
 		     llc->p_flag)) {
 		llc->failed_data_req = 1;
-		goto out;
+		goto out_free;
 	}
 	ev = llc_conn_ev(skb);
 	ev->type      = LLC_CONN_EV_TYPE_PRIM;
 	ev->prim      = LLC_DATA_PRIM;
 	ev->prim_type = LLC_PRIM_TYPE_REQ;
 	skb->dev      = llc->dev;
-	rc = llc_conn_state_process(sk, skb);
-out:
+	return llc_conn_state_process(sk, skb);
+
+out_free:
+	kfree_skb(skb);
 	return rc;
 }
 
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/21 llc: fix sk_buff refcounting in llc_conn_state_process()

In reply to Sasha Levin

From: Eric Biggers <[email protected]>

[ Upstream commit 36453c852816f19947ca482a595dffdd2efa4965 ]

If llc_conn_state_process() sees that llc_conn_service() put the skb on a list, it will drop one fewer references to it. This is wrong because the current behavior is that llc_conn_service() never consumes a reference to the skb.

The code also makes the number of skb references being dropped conditional on which of ind_prim and cfm_prim are nonzero, yet neither of these affects how many references are *acquired*. So there is extra code that tries to fix this up by sometimes taking another reference.

Remove the unnecessary/broken refcounting logic and instead just add an skb_get() before the only two places where an extra reference is actually consumed.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/llc_conn.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)
net/llc/llc_conn.c +6 -27
index 2689e95471dc4..1bdbd134bd7a8 100644
@@ -64,12 +64,6 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 	struct llc_sock *llc = llc_sk(skb->sk);
 	struct llc_conn_state_ev *ev = llc_conn_ev(skb);
 
-	/*
-	 * We have to hold the skb, because llc_conn_service will kfree it in
-	 * the sending path and we need to look at the skb->cb, where we encode
-	 * llc_conn_state_ev.
-	 */
-	skb_get(skb);
 	ev->ind_prim = ev->cfm_prim = 0;
 	/*
 	 * Send event to state machine
@@ -77,21 +71,12 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 	rc = llc_conn_service(skb->sk, skb);
 	if (unlikely(rc != 0)) {
 		printk(KERN_ERR "%s: llc_conn_service failed\n", __func__);
-		goto out_kfree_skb;
-	}
-
-	if (unlikely(!ev->ind_prim && !ev->cfm_prim)) {
-		/* indicate or confirm not required */
-		if (!skb->next)
-			goto out_kfree_skb;
 		goto out_skb_put;
 	}
 
-	if (unlikely(ev->ind_prim && ev->cfm_prim)) /* Paranoia */
-		skb_get(skb);
-
 	switch (ev->ind_prim) {
 	case LLC_DATA_PRIM:
+		skb_get(skb);
 		llc_save_primitive(sk, skb, LLC_DATA_PRIM);
 		if (unlikely(sock_queue_rcv_skb(sk, skb))) {
 			/*
@@ -108,6 +93,7 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 		 * skb->sk pointing to the newly created struct sock in
 		 * llc_conn_handler. -acme
 		 */
+		skb_get(skb);
 		skb_queue_tail(&sk->sk_receive_queue, skb);
 		sk->sk_state_change(sk);
 		break;
@@ -123,7 +109,6 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 				sk->sk_state_change(sk);
 			}
 		}
-		kfree_skb(skb);
 		sock_put(sk);
 		break;
 	case LLC_RESET_PRIM:
@@ -132,14 +117,11 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 		 * RESET is not being notified to upper layers for now
 		 */
 		printk(KERN_INFO "%s: received a reset ind!\n", __func__);
-		kfree_skb(skb);
 		break;
 	default:
-		if (ev->ind_prim) {
+		if (ev->ind_prim)
 			printk(KERN_INFO "%s: received unknown %d prim!\n",
 				__func__, ev->ind_prim);
-			kfree_skb(skb);
-		}
 		/* No indication */
 		break;
 	}
@@ -181,15 +163,12 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 		printk(KERN_INFO "%s: received a reset conf!\n", __func__);
 		break;
 	default:
-		if (ev->cfm_prim) {
+		if (ev->cfm_prim)
 			printk(KERN_INFO "%s: received unknown %d prim!\n",
 					__func__, ev->cfm_prim);
-			break;
-		}
-		goto out_skb_put; /* No confirmation */
+		/* No confirmation */
+		break;
 	}
-out_kfree_skb:
-	kfree_skb(skb);
 out_skb_put:
 	kfree_skb(skb);
 	return rc;
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/21 net: stmmac: fix length of PTP clock's name string

In reply to Sasha Levin

From: Antonio Borneo <[email protected]>

[ Upstream commit 5da202c88f8c355ad79bc2e8eb582e6d433060e7 ]

The field "name" in struct ptp_clock_info has a fixed size of 16 chars and is used as zero terminated string by clock_name_show() in drivers/ptp/ptp_sysfs.c
The current initialization value requires 17 chars to fit also the null termination, and this causes overflow to the next bytes in the struct when the string is read as null terminated:

	hexdump -C /sys/class/ptp/ptp0/clock_name
	00000000  73 74 6d 6d 61 63 5f 70  74 70 5f 63 6c 6f 63 6b  |stmmac_ptp_clock|
	00000010  a0 ac b9 03 0a                                    |.....|

where the extra 4 bytes (excluding the newline) after the string represent the integer 0x03b9aca0 = 62500000 assigned to the field "max_adj" that follows "name" in the same struct.

There is no strict requirement for the "name" content and in the comment in ptp_clock_kernel.h it's reported it should just be 'A short "friendly name" to identify the clock'.
Replace it with "stmmac ptp".

Fixes 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +1 -1
index 3eb281d1db08a..2313308090370 100644
@@ -158,7 +158,7 @@ static int stmmac_enable(struct ptp_clock_info *ptp,
 /* structure describing a PTP hardware clock */
 static struct ptp_clock_info stmmac_ptp_clock_ops = {
 	.owner = THIS_MODULE,
-	.name = "stmmac_ptp_clock",
+	.name = "stmmac ptp",
 	.max_adj = 62500000,
 	.n_alarm = 0,
 	.n_ext_ts = 0,
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 11/21 bonding: fix potential NULL deref in bond_update_slave_arr

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit a7137534b597b7c303203e6bc3ed87e87a273bb8 ]

syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr

A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL.

[1]

Failed to build slave-array.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access

general protection fault: 0000 [#1] SMP KASAN PTI
Modules linked in:
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039
RSP: 0018:ffff88018fe33678 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000
RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20
RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0
FS:  00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923
 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline]
 [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562
 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328
 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495
 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088
 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196
 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline]
 [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline]
 [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688
 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline]
 [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696
 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305
 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Cc Mahesh Bandewar <[email protected]>
---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +1 -1
index 8820fb1aec5b4..c1971bca62fb1 100644
@@ -3963,7 +3963,7 @@ int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave)
 		 * this to-be-skipped slave to send a packet out.
 		 */
 		old_arr = rtnl_dereference(bond->slave_arr);
-		for (idx = 0; idx < old_arr->count; idx++) {
+		for (idx = 0; old_arr != NULL && idx < old_arr->count; idx++) {
 			if (skipslave == old_arr->arr[idx]) {
 				old_arr->arr[idx] =
 				    old_arr->arr[old_arr->count-1];
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/21 act_mirred: Fix mirred_init_module error handling

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 11c9a7d38af524217efb7a176ad322b97ac2f163 ]

If tcf_register_action failed, mirred_device_notifier should be unregistered.

Fixes 3b87956ea645 ("net sched: fix race in mirred device removal")
---
 net/sched/act_mirred.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/sched/act_mirred.c +5 -1
index fc3650b061924..9b4c7c42c932d 100644
@@ -332,7 +332,11 @@ static int __init mirred_init_module(void)
 		return err;
 
 	pr_info("Mirror/redirect action on\n");
-	return tcf_register_action(&act_mirred_ops, &mirred_net_ops);
+	err = tcf_register_action(&act_mirred_ops, &mirred_net_ops);
+	if (err)
+		unregister_netdevice_notifier(&mirred_device_notifier);
+
+	return err;
 }
 
 static void __exit mirred_cleanup_module(void)
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/21 net: usb: qmi_wwan: add Telit 0x1050 composition

In reply to Sasha Levin

From: Daniele Palmas <[email protected]>

[ Upstream commit e0ae2c578d3909e60e9448207f5d83f785f1129f ]

This patch adds support for Telit FN980 0x1050 composition

0x1050: tty, adb, rmnet, tty, tty, tty, tty

---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
index 0d48714c3f286..cfc37962f6e3d 100644
@@ -922,6 +922,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
 	{QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)},	/* Telit FN980 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 14/21 drm/msm/dsi: Implement reset correctly

In reply to Sasha Levin

From: Jeffrey Hugo <[email protected]>

[ Upstream commit 78e31c42261779a01bc73472d0f65f15378e9de3 ]

On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation.

The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset.

wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous.

Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps.

Fixes a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc Hai Li <[email protected]>
Cc Rob Clark <[email protected]>
[seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS]
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +4 -2
index 6f240021705b0..e49b414c012c6 100644
@@ -33,6 +33,8 @@
 #include "sfpb.xml.h"
 #include "dsi_cfg.h"
 
+#define DSI_RESET_TOGGLE_DELAY_MS 20
+
 static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
 {
 	u32 ver;
@@ -909,7 +911,7 @@ static void dsi_sw_reset(struct msm_dsi_host *msm_host)
 	wmb(); /* clocks need to be enabled before reset */
 
 	dsi_write(msm_host, REG_DSI_RESET, 1);
-	wmb(); /* make sure reset happen */
+	msleep(DSI_RESET_TOGGLE_DELAY_MS); /* make sure reset happen */
 	dsi_write(msm_host, REG_DSI_RESET, 0);
 }
 
@@ -1288,7 +1290,7 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host)
 
 	/* dsi controller can only be reset while clocks are running */
 	dsi_write(msm_host, REG_DSI_RESET, 1);
-	wmb();	/* make sure reset happen */
+	msleep(DSI_RESET_TOGGLE_DELAY_MS); /* make sure reset happen */
 	dsi_write(msm_host, REG_DSI_RESET, 0);
 	wmb();	/* controller out of reset */
 	dsi_write(msm_host, REG_DSI_CTRL, data0);
Signature · 6 lines
2.20.1

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
author maintainer
#14 lore raw

PATCH 15/21 hrtimer: Annotate lockless access to timer->base

In reply to Sasha Levin

From: Eric Dumazet <[email protected]>

[ Upstream commit ff229eee3d897f52bd001c841f2d3cce8853ecdc ]

Followup to commit dd2261ed45aa ("hrtimer: Protect lockless access to timer->base")

lock_hrtimer_base() fetches timer->base without lock exclusion.

Compiler is allowed to read timer->base twice (even if considered dumb) which could end up trying to lock migration_base and return &migration_base.

  base = timer->base;
  if (likely(base != &migration_base)) {
       /* compiler reads timer->base again, and now (base == &migration_base)

       raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
       if (likely(base == timer->base))
            return base; /* == &migration_base ! */

Similarly the write sides must use WRITE_ONCE() to avoid store tearing.

---
 kernel/time/hrtimer.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
kernel/time/hrtimer.c +4 -4
index c93729661be0e..6be150f16539b 100644
@@ -140,7 +140,7 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
 	struct hrtimer_clock_base *base;
 
 	for (;;) {
-		base = timer->base;
+		base = READ_ONCE(timer->base);
 		if (likely(base != &migration_base)) {
 			raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
 			if (likely(base == timer->base))
@@ -232,7 +232,7 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
 			return base;
 
 		/* See the comment in lock_hrtimer_base() */
-		timer->base = &migration_base;
+		WRITE_ONCE(timer->base, &migration_base);
 		raw_spin_unlock(&base->cpu_base->lock);
 		raw_spin_lock(&new_base->cpu_base->lock);
 
@@ -241,10 +241,10 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
 			raw_spin_unlock(&new_base->cpu_base->lock);
 			raw_spin_lock(&base->cpu_base->lock);
 			new_cpu_base = this_cpu_base;
-			timer->base = base;
+			WRITE_ONCE(timer->base, base);
 			goto again;
 		}
-		timer->base = new_base;
+		WRITE_ONCE(timer->base, new_base);
 	} else {
 		if (new_cpu_base != this_cpu_base &&
 		    hrtimer_check_target(timer, new_base)) {
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 16/21 xtensa: fix {get,put}_user() for 64bit values

In reply to Sasha Levin

From: Al Viro <[email protected]>

[ Upstream commit 6595d144decec396bf2e2efee27e50634a4b627f ]

First of all, on short copies __copy_{to,from}_user() return the amount of bytes left uncopied, *not* -EFAULT. get_user() and put_user() are expected to return -EFAULT on failure.

Another problem is get_user(v32, (__u64 __user *)p); that should fetch 64bit value and the assign it to v32, truncating it in process. Current code, OTOH, reads 8 bytes of data and stores them at the address of v32, stomping on the 4 bytes that follow v32 itself.

---
 arch/xtensa/include/asm/uaccess.h | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
arch/xtensa/include/asm/uaccess.h +11 -2
index 848a3d736bcbf..20b818db377d7 100644
@@ -104,7 +104,7 @@ do {									\
 	case 4: __put_user_asm(x, ptr, retval, 4, "s32i", __cb); break;	\
 	case 8: {							\
 		     __typeof__(*ptr) __v64 = x;			\
-		     retval = __copy_to_user(ptr, &__v64, 8);		\
+		     retval = __copy_to_user(ptr, &__v64, 8) ? -EFAULT : 0;	\
 		     break;						\
 	        }							\
 	default: __put_user_bad();					\
@@ -203,7 +203,16 @@ do {									\
 	case 1: __get_user_asm(x, ptr, retval, 1, "l8ui", __cb);  break;\
 	case 2: __get_user_asm(x, ptr, retval, 2, "l16ui", __cb); break;\
 	case 4: __get_user_asm(x, ptr, retval, 4, "l32i", __cb);  break;\
-	case 8: retval = __copy_from_user(&x, ptr, 8);    break;	\
+	case 8: {							\
+		u64 __x;						\
+		if (unlikely(__copy_from_user(&__x, ptr, 8))) {		\
+			retval = -EFAULT;				\
+			(x) = 0;					\
+		} else {						\
+			(x) = *(__force __typeof__((ptr)))&__x;		\
+		}							\
+		break;							\
+	}								\
 	default: (x) = __get_user_bad();				\
 	}								\
 } while (0)
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 17/21 net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3

In reply to Sasha Levin

From: Florian Fainelli <[email protected]>

[ Upstream commit efb86fede98cdc70b674692ff617b1162f642c49 ]

The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference.

Fixes aa09677cba42 ("net: bcmgenet: add MDIO routines")
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 +
 drivers/net/ethernet/broadcom/genet/bcmmii.c   | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/genet/bcmgenet.h +1 -0
index 3f8858db12eb3..dcf10ea60e7fe 100644
@@ -362,6 +362,7 @@ struct bcmgenet_mib_counters {
 #define  EXT_ENERGY_DET_MASK		(1 << 12)
 
 #define EXT_RGMII_OOB_CTRL		0x0C
+#define  RGMII_MODE_EN_V123		(1 << 0)
 #define  RGMII_LINK			(1 << 4)
 #define  OOB_DISABLE			(1 << 5)
 #define  RGMII_MODE_EN			(1 << 6)
drivers/net/ethernet/broadcom/genet/bcmmii.c +5 -1
index 9bd90a7c4d40f..c3ca0515c6a05 100644
@@ -328,7 +328,11 @@ int bcmgenet_mii_config(struct net_device *dev)
 	 */
 	if (priv->ext_phy) {
 		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
-		reg |= RGMII_MODE_EN | id_mode_dis;
+		reg |= id_mode_dis;
+		if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
+			reg |= RGMII_MODE_EN_V123;
+		else
+			reg |= RGMII_MODE_EN;
 		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
 	}
 
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 18/21 net: usb: sr9800: fix uninitialized local variable

In reply to Sasha Levin

From: Valentin Vidic <[email protected]>

[ Upstream commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 ]

Make sure res does not contain random value if the call to sr_read_cmd fails for some reason.

---
 drivers/net/usb/sr9800.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/usb/sr9800.c +1 -1
index 004c955c1fd1b..da0ae16f5c74c 100644
@@ -336,7 +336,7 @@ static void sr_set_multicast(struct net_device *net)
 static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(net);
-	__le16 res;
+	__le16 res = 0;
 
 	mutex_lock(&dev->phy_mutex);
 	sr_set_sw_mii(dev);
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 19/21 usb: hso: obey DMA rules in tiocmget

In reply to Sasha Levin

From: Oliver Neukum <[email protected]>

[ Upstream commit af0de1303c4e8f44fadd7b4c593f09f22324b04f ]

The serial state information must not be embedded into another data structure, as this interferes with cache handling for DMA on architectures without cache coherence..
That would result in data corruption on some architectures Allocating it separately.

v2: fix syntax error

---
 drivers/net/usb/hso.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/net/usb/hso.c +9 -4
index 27fc699d8be5b..e5d6a70c44db7 100644
@@ -201,7 +201,7 @@ struct hso_tiocmget {
 	int    intr_completed;
 	struct usb_endpoint_descriptor *endp;
 	struct urb *urb;
-	struct hso_serial_state_notification serial_state_notification;
+	struct hso_serial_state_notification *serial_state_notification;
 	u16    prev_UART_state_bitmap;
 	struct uart_icount icount;
 };
@@ -1447,7 +1447,7 @@ static int tiocmget_submit_urb(struct hso_serial *serial,
 			 usb_rcvintpipe(usb,
 					tiocmget->endp->
 					bEndpointAddress & 0x7F),
-			 &tiocmget->serial_state_notification,
+			 tiocmget->serial_state_notification,
 			 sizeof(struct hso_serial_state_notification),
 			 tiocmget_intr_callback, serial,
 			 tiocmget->endp->bInterval);
@@ -1494,7 +1494,7 @@ static void tiocmget_intr_callback(struct urb *urb)
 	/* wIndex should be the USB interface number of the port to which the
 	 * notification applies, which should always be the Modem port.
 	 */
-	serial_state_notification = &tiocmget->serial_state_notification;
+	serial_state_notification = tiocmget->serial_state_notification;
 	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
 	    serial_state_notification->bNotification != B_NOTIFICATION ||
 	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
@@ -2580,6 +2580,8 @@ static void hso_free_tiomget(struct hso_serial *serial)
 		usb_free_urb(tiocmget->urb);
 		tiocmget->urb = NULL;
 		serial->tiocmget = NULL;
+		kfree(tiocmget->serial_state_notification);
+		tiocmget->serial_state_notification = NULL;
 		kfree(tiocmget);
 	}
 }
@@ -2630,10 +2632,13 @@ static struct hso_device *hso_create_bulk_serial_device(
 		num_urbs = 2;
 		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
 					   GFP_KERNEL);
+		serial->tiocmget->serial_state_notification
+			= kzalloc(sizeof(struct hso_serial_state_notification),
+					   GFP_KERNEL);
 		/* it isn't going to break our heart if serial->tiocmget
 		 *  allocation fails don't bother checking this.
 		 */
-		if (serial->tiocmget) {
+		if (serial->tiocmget && serial->tiocmget->serial_state_notification) {
 			tiocmget = serial->tiocmget;
 			tiocmget->endp = hso_get_ep(interface,
 						    USB_ENDPOINT_XFER_INT,
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 20/21 ocfs2: fix error handling in ocfs2_setattr()

In reply to Sasha Levin

From: Chengguang Xu <[email protected]>

[ Upstream commit ce750f43f5790de74c1644c39d78f684071658d1 ]

Should set transfer_to[USRQUOTA/GRPQUOTA] to NULL on error case before jumping to do dqput().

---
 fs/ocfs2/file.c | 2 ++
 1 file changed, 2 insertions(+)
fs/ocfs2/file.c +2 -0
index 05a0fb9854f9e..8526589a7cdc5 100644
@@ -1224,6 +1224,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 			transfer_to[USRQUOTA] = dqget(sb, make_kqid_uid(attr->ia_uid));
 			if (IS_ERR(transfer_to[USRQUOTA])) {
 				status = PTR_ERR(transfer_to[USRQUOTA]);
+				transfer_to[USRQUOTA] = NULL;
 				goto bail_unlock;
 			}
 		}
@@ -1233,6 +1234,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 			transfer_to[GRPQUOTA] = dqget(sb, make_kqid_gid(attr->ia_gid));
 			if (IS_ERR(transfer_to[GRPQUOTA])) {
 				status = PTR_ERR(transfer_to[GRPQUOTA]);
+				transfer_to[GRPQUOTA] = NULL;
 				goto bail_unlock;
 			}
 		}
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 21/21 scripts/gdb: fix debugging modules on s390

In reply to Sasha Levin

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 585d730d41120926e3f79a601edad3930fa28366 ]

Currently lx-symbols assumes that module text is always located at module->core_layout->base, but s390 uses the following layout:

  +------+  <- module->core_layout->base
  | GOT  |
  +------+  <- module->core_layout->base + module->arch->plt_offset
  | PLT  |
  +------+  <- module->core_layout->base + module->arch->plt_offset +
  | TEXT |     module->arch->plt_size
  +------+

Therefore, when trying to debug modules on s390, all the symbol addresses are skewed by plt_offset + plt_size.

Fix by adding plt_offset + plt_size to module_addr in load_module_symbols().

---
 scripts/gdb/linux/symbols.py | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
scripts/gdb/linux/symbols.py +7 -1
index 004b0ac7fa72d..d869e588f4ec4 100644
@@ -15,7 +15,7 @@ import gdb
 import os
 import re
 
-from linux import modules
+from linux import modules, utils
 
 
 if hasattr(gdb, 'Breakpoint'):
@@ -116,6 +116,12 @@ lx-symbols command."""
             module_file = self._get_module_file(module_name)
 
         if module_file:
+            if utils.is_target_arch('s390'):
+                # Module text is preceded by PLT stubs on s390.
+                module_arch = module['arch']
+                plt_offset = int(module_arch['plt_offset'])
+                plt_size = int(module_arch['plt_size'])
+                module_addr = hex(int(module_addr, 0) + plt_offset + plt_size)
             gdb.write("loading @{addr}: {filename}\n".format(
                 addr=module_addr, filename=module_file))
             cmdline = "add-symbol-file {filename} {addr}{sections}".format(
Signature · 1 line
2.20.1