Skip to contentSkip to conversation

5.3.8-stable review

PATCH In review Greg Kroah-Hartman 6 participants 203 messages Oct 27, 2019 – Oct 29, 2019 Page 1 of 2

Subsystems (9)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.3.8-stable review

This is the start of the stable review cycle for the 5.3.8 release. There are 197 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Tue 29 Oct 2019 08:27:02 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.3.8-rc1

Greg KH <[email protected]>
RDMA/cxgb4: Do not dma memory off of the stack

Tejun Heo <[email protected]>
blk-rq-qos: fix first node deletion of rq_qos_del()

Chris Goldsworthy <[email protected]>
of: reserved_mem: add missing of_node_put() for proper ref-counting

Viresh Kumar <[email protected]>
opp: of: drop incorrect lockdep_assert_held()

Rafael J. Wysocki <[email protected]>
PCI: PM: Fix pci_power_up()

Juergen Gross <[email protected]>
xen/netback: fix error path of xenvif_connect_data()

Jeff Layton <[email protected]>
ceph: just skip unrecognized info in ceph_reply_info_extra

Rafael J. Wysocki <[email protected]>
cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown

Christophe JAILLET <[email protected]>
memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()'

Greg Kurz <[email protected]>
KVM: PPC: Book3S HV: XIVE: Ensure VP isn't already in use

Qu Wenruo <[email protected]>
btrfs: tracepoints: Fix bad entry members of qgroup events

Qu Wenruo <[email protected]>
btrfs: tracepoints: Fix wrong parameter order for qgroup events

Filipe Manana <[email protected]>
Btrfs: check for the full sync flag while holding the inode lock during fsync

Filipe Manana <[email protected]>
Btrfs: fix qgroup double free after failure to reserve metadata for delalloc

David Sterba <[email protected]>
btrfs: don't needlessly create extent-refs kernel thread

Filipe Manana <[email protected]>
Btrfs: add missing extents release on file extent cluster relocation error

Qu Wenruo <[email protected]>
btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()

Patrick Williams <[email protected]>
pinctrl: armada-37xx: swap polarity on LED group

Patrick Williams <[email protected]>
pinctrl: armada-37xx: fix control of pins 32 and up

Dmitry Torokhov <[email protected]>
pinctrl: cherryview: restore Strago DMI workaround for all versions

Roman Kagan <[email protected]>
x86/hyperv: Make vapic support x2apic mode

Sean Christopherson <[email protected]>
x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu

Steve Wahl <[email protected]>
x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area

Marc Zyngier <[email protected]>
irqchip/sifive-plic: Switch to fasteoi flow

Mikulas Patocka <[email protected]>
dm cache: fix bugs when a GFP_NOWAIT allocation fails

Dan Williams <[email protected]>
fs/dax: Fix pmd vs pte conflict detection

Prateek Sood <[email protected]>
tracing: Fix race in perf_trace_buf initialization

Alexander Shishkin <[email protected]>
perf/aux: Fix AUX output stopping

Pavel Shilovsky <[email protected]>
CIFS: Fix use after free of file info structures

Chuhong Yuan <[email protected]>
cifs: Fix missed free operations

Roberto Bergantinos Corpas <[email protected]>

    CIFS: avoid using MID 0xFFFF

Marc Zyngier <[email protected]>
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected

Marc Zyngier <[email protected]>
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT

Marc Zyngier <[email protected]>
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR

Marc Zyngier <[email protected]>
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set

James Morse <[email protected]>
EDAC/ghes: Fix Use after free in ghes_edac remove path

Helge Deller <[email protected]>
parisc: Fix vmap memory leak in ioremap()/iounmap()

Thomas Gleixner <[email protected]>
lib/vdso: Make clock_getres() POSIX compliant again

Gerald Schaefer <[email protected]>
s390/kaslr: add support for R_390_GLOB_DAT relocation type

Johan Hovold <[email protected]>
s390/zcrypt: fix memleak at release

Max Filippov <[email protected]>
xtensa: fix change_bit in exclusive access option

Max Filippov <[email protected]>
xtensa: drop EXPORT_SYMBOL for outs*/ins*

Chenwandun <[email protected]>
zram: fix race between backing_dev_show and backing_dev_store

Jane Chu <[email protected]>
mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once

David Hildenbrand <[email protected]>
hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()

Mike Rapoport <[email protected]>
mm: memblock: do not enforce current limit for memblock_phys* family

Honglei Wang <[email protected]>
mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size

Vlastimil Babka <[email protected]>
mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()

Roman Gushchin <[email protected]>
mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release

Aneesh Kumar K.V <[email protected]>
mm/memunmap: don't access uninitialized memmap in memunmap_pages()

David Hildenbrand <[email protected]>
mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()

Qian Cai <[email protected]>
mm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo

Qian Cai <[email protected]>
mm/slub: fix a deadlock in show_slab_objects()

David Hildenbrand <[email protected]>
mm/memory-failure.c: don't access uninitialized memmaps in memory_failure()

Faiz Abbas <[email protected]>
mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C

Faiz Abbas <[email protected]>
mmc: cqhci: Commit descriptors before setting the doorbell

Sascha Hauer <[email protected]>
mmc: mxs: fix flags passed to dmaengine_prep_slave_sg

Jens Axboe <[email protected]>

    io_uring: used cached copies of sq->dropped and cq->overflow

Pavel Begunkov <[email protected]>
io_uring: Fix race for sqes with userspace

Pavel Begunkov <[email protected]>
io_uring: Fix broken links with offloading

David Hildenbrand <[email protected]>
fs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c

David Hildenbrand <[email protected]>
drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()

Philip Yang <[email protected]>
drm/amdgpu: user pages array memory leak fix

Alex Deucher <[email protected]>
drm/amdgpu/uvd7: fix allocation size in enc ring test (v2)

Alex Deucher <[email protected]>
drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)

Alex Deucher <[email protected]>
drm/amdgpu/vcn: fix allocation size in enc ring test

Alex Deucher <[email protected]>
drm/amdgpu/vce: fix allocation size in enc ring test

Ville Syrjälä <[email protected]>
drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pin

Chris Wilson <[email protected]>
drm/i915/userptr: Never allow userptr into the mappable GGTT

Xiaojie Yuan <[email protected]>
drm/amdgpu/sdma5: fix mask value of POLL_REGMEM packet for pipe sync

Hans de Goede <[email protected]>
drm/amdgpu: Bail earlier when amdgpu.cik_/si_support is not set to 1

Steven Price <[email protected]>
drm/panfrost: Handle resetting on timeout better

Thomas Hellstrom <[email protected]>
drm/ttm: Restore ttm prefaulting

Kai-Heng Feng <[email protected]>
drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50

Will Deacon <[email protected]>
mac80211: Reject malformed SSID elements

Will Deacon <[email protected]>
cfg80211: wext: avoid copying malformed SSIDs

Luca Coelho <[email protected]>
iwlwifi: pcie: change qu with jf devices to use qu configuration

Dan Carpenter <[email protected]>
ACPI: NFIT: Fix unlock on error in scrub_show()

John Garry <[email protected]>
ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()

Junya Monden <[email protected]>
ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting

Dixit Parmar <[email protected]>
Input: st1232 - fix reporting multitouch coordinates

Evan Green <[email protected]>
Input: synaptics-rmi4 - avoid processing unknown IRQs

Marco Felsch <[email protected]>
Input: da9063 - fix capability and drop KEY_SLEEP

Kai-Heng Feng <[email protected]>
Revert "Input: elantech - enable SMBus on new (2018+) systems"

Bart Van Assche <[email protected]>
scsi: ch: Make it possible to open a ch device multiple times again

Yufen Yu <[email protected]>
scsi: core: try to get module before removing device

Damien Le Moal <[email protected]>
scsi: core: save/restore command resid for error handling

Oliver Neukum <[email protected]>
scsi: sd: Ignore a failure to sync cache due to lack of authorization

Steffen Maier <[email protected]>
scsi: zfcp: fix reaction on bit error threshold notification

Colin Ian King <[email protected]>

    staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

Paul Burton <[email protected]>
MIPS: tlbex: Fix build_restore_pagemask KScratch restore

Jann Horn <[email protected]>

    binder: Don't modify VMA bounds in ->mmap handler

Johan Hovold <[email protected]>
USB: ldusb: fix read info leaks

Johan Hovold <[email protected]>
USB: usblp: fix use-after-free on disconnect

Johan Hovold <[email protected]>
USB: ldusb: fix memleak on disconnect

Johan Hovold <[email protected]>

    USB: serial: ti_usb_3410_5052: fix port-close races

Gustavo A. R. Silva <[email protected]>
usb: udc: lpc32xx: fix bad bit shift operation

Lukas Wunner <[email protected]>
ALSA: hda - Force runtime PM on Nvidia HDMI codecs

Szabolcs Szőke <[email protected]>
ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers

Daniel Drake <[email protected]>
ALSA: hda/realtek - Enable headset mic on Asus MJ401TA

Kailang Yang <[email protected]>
ALSA: hda/realtek - Add support for ALC711

Johan Hovold <[email protected]>
USB: legousbtower: fix memleak on disconnect

Pavel Begunkov <[email protected]>
io_uring: Fix corrupted user_data

Jens Axboe <[email protected]>
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD

Eric Dumazet <[email protected]>

    rxrpc: use rcu protection while reading sk->sk_user_data

Micah Morton <[email protected]>
LSM: SafeSetID: Stop releasing uninitialized ruleset

Yonglong Liu <[email protected]>
net: phy: Fix "link partner" information disappear issue

Randy Dunlap <[email protected]>
net: ethernet: broadcom: have drivers select DIMLIB as needed

YueHaibing <[email protected]>
netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exit

Davide Caratti <[email protected]>
net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions

Davide Caratti <[email protected]>
net: avoid errors when trying to pop MLPS header on non-MPLS packets

Marek Vasut <[email protected]>
net: phy: micrel: Update KSZ87xx PHY name

Marek Vasut <[email protected]>
net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs

Dmitry Bogdanov <[email protected]>
net: aquantia: correctly handle macvlan and multicast coexistence

Dmitry Bogdanov <[email protected]>
net: aquantia: do not pass lro session with invalid tcp checksum

Igor Russkikh <[email protected]>
net: aquantia: when cleaning hw cache it should be toggled

Igor Russkikh <[email protected]>
net: aquantia: temperature retrieval fix

Xin Long <[email protected]>
sctp: change sctp_prot .no_autobind with true

Vinicius Costa Gomes <[email protected]>
sched: etf: Fix ordering of packets with same txtime

David Howells <[email protected]>
rxrpc: Fix possible NULL pointer access in ICMP handling

Biao Huang <[email protected]>
net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow

Xin Long <[email protected]>
net: ipv6: fix listify ip6_rcv_finish in case of forwarding

Cédric Le Goater <[email protected]>
net/ibmvnic: Fix EOI when running in XIVE mode.

Thomas Bogendoerfer <[email protected]>

    net: i82596: fix dma_alloc_attr for sni_82596

Florian Fainelli <[email protected]>

    net: bcmgenet: Set phydev->dev_flags only for internal PHYs

Florian Fainelli <[email protected]>
net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3

Eric Dumazet <[email protected]>
net: avoid potential infinite loop in tc_ctl_action()

Stefano Brivio <[email protected]>
ipv4: Return -ENETUNREACH if we can't create route but saddr is valid

Wei Wang <[email protected]>
ipv4: fix race condition between route lookup and invalidation

Kevin Hao <[email protected]>
nvme-pci: Set the prp2 correctly when using more than 4k page

Yi Li <[email protected]>
ocfs2: fix panic due to ocfs2_wq is null

Alex Deucher <[email protected]>
Revert "drm/radeon: Fix EEH during kexec"

Song Liu <[email protected]>
md/raid0: fix warning message for parameter default_layout

Dan Williams <[email protected]>
libata/ahci: Fix PCS quirk application

Cong Wang <[email protected]>
net_sched: fix backward compatibility for TCA_ACT_KIND

Cong Wang <[email protected]>
net_sched: fix backward compatibility for TCA_KIND

Linus Torvalds <[email protected]>
filldir[64]: remove WARN_ON_ONCE() for bad directory entries

Linus Torvalds <[email protected]>
uaccess: implement a proper unsafe_copy_to_user() and switch filldir over to it

Linus Torvalds <[email protected]>
Make filldir[64]() verify the directory entry filename is valid

Linus Torvalds <[email protected]>
elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings

Linus Torvalds <[email protected]>
Convert filldir[64]() from __put_user() to unsafe_put_user()

Jacob Keller <[email protected]>
namespace: fix namespace.pl script to support relative paths

Russell King <[email protected]>
net: phy: fix write to mii-ctrl1000 register

Andrea Merello <[email protected]>
net: phy: allow for reset line to be tied to a sleepy GPIO controller

Kai-Heng Feng <[email protected]>
r8152: Set macpassthru in reset_resume callback

Qian Cai <[email protected]>
s390/mm: fix -Wunused-but-set-variable warnings

Randy Dunlap <[email protected]>
lib: textsearch: fix escapes in example code

Shuah Khan <[email protected]>
selftests: kvm: Fix libkvm build error

Thierry Reding <[email protected]>
net: stmmac: Avoid deadlock on suspend/resume

Yizhuo <[email protected]>
net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write()

Christophe JAILLET <[email protected]>
mips: Loongson: Fix the link time qualifier of 'serial_exit()'

Navid Emamdoost <[email protected]>
drm/amd/display: memory leak

Navid Emamdoost <[email protected]>
drm/amdgpu: fix multiple memory leaks in acp_hw_init

Albert Ou <[email protected]>
riscv: Fix memblock reservation for device tree blob

Palmer Dabbelt <[email protected]>
RISC-V: Clear load reservations while restoring hart contexts

Oleksij Rempel <[email protected]>
net: ag71xx: fix mdio subnode support

Jose Abreu <[email protected]>
net: stmmac: Do not stop PHY if WoL is enabled

Jose Abreu <[email protected]>
net: stmmac: Correctly take timestamp for PTPv2

Jose Abreu <[email protected]>
net: stmmac: dwmac4: Always update the MAC Hash Filter

Jose Abreu <[email protected]>
net: stmmac: xgmac: Not all Unicast addresses may be available

Wen Yang <[email protected]>
net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name

Wen Yang <[email protected]>
net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name

Pablo Neira Ayuso <[email protected]>
netfilter: nft_connlimit: disable bh on garbage collection

Miaoqing Pan <[email protected]>
mac80211: fix txq null pointer dereference

Miaoqing Pan <[email protected]>
nl80211: fix null pointer dereference

Martijn Coenen <[email protected]>
loop: change queue block size to match when using DIO

Ross Lagerwall <[email protected]>
xen/efi: Set nonblocking callbacks

Oleksij Rempel <[email protected]>
MIPS: dts: ar9331: fix interrupt-controller size

Michal Vokáč <[email protected]>
net: dsa: qca8k: Use up to 7 ports for all operations

Peter Ujfalusi <[email protected]>
ARM: dts: am4372: Set memory bandwidth limit for DISPC

Navid Emamdoost <[email protected]>

    ieee802154: ca8210: prevent memory leak

Ming Lei <[email protected]>
blk-mq: honor IO scheduler for multiqueue devices

Sagi Grimberg <[email protected]>
nvme-rdma: fix possible use-after-free in connect timeout

Navid Emamdoost <[email protected]>
drm/komeda: prevent memory leak in komeda_wb_connector_add

Marta Rybczynska <[email protected]>
nvme: allow 64-bit results in passthru commands

Jian-Hong Pan <[email protected]>
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T

Gabriel Craciunescu <[email protected]>
Added QUIRKs for ADATA XPG SX8200 Pro 512GB

Max Gurtovoy <[email protected]>
nvme-rdma: Fix max_hw_sectors calculation

Dan Carpenter <[email protected]>
nvme: fix an error code in nvme_init_subsystem()

Mario Limonciello <[email protected]>
nvme-pci: Save PCI state before putting drive into deepest state

Wunderlich, Mark <[email protected]>
nvme-tcp: fix wrong stop condition in io_work

Tony Lindgren <[email protected]>
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()

Tony Lindgren <[email protected]>
ARM: OMAP2+: Add missing LCDC midlemode for am335x

Tony Lindgren <[email protected]>
ARM: OMAP2+: Fix missing reset done flag for am3 and am43

Tony Lindgren <[email protected]>
ARM: dts: Fix gpio0 flags for am335x-icev2

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N link up fail

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N link reset

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stale mem access on driver unload

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix unbound sleep in fcport delete path.

Himanshu Madhani <[email protected]>
scsi: qla2xxx: Silence fwdump template message

Xiang Chen <[email protected]>
scsi: megaraid: disable device when probe failed after enabled device

Stanley Chu <[email protected]>
scsi: ufs: skip shutdown if hba is not powered

Balbir Singh <[email protected]>
nvme-pci: Fix a race in controller removal

Tony Lindgren <[email protected]>
ARM: dts: Fix wrong clocks for dra7 mcasp

Tony Lindgren <[email protected]>
clk: ti: dra7: Fix mcasp8 clock bits

Lowry Li (Arm Technology China) <[email protected]>
drm: Clear the fence pointer when writeback job signaled

Lowry Li (Arm Technology China) <[email protected]>
drm: Free the writeback_job when it with an empty fb

-------------

Diffstat:

 Documentation/arm64/silicon-errata.rst             |   2 +
 Makefile                                           |   4 +-
 arch/arm/boot/dts/am335x-icev2.dts                 |   2 +-
 arch/arm/boot/dts/am33xx-l4.dtsi                   |   6 +-
 arch/arm/boot/dts/am4372.dtsi                      |   2 +
 arch/arm/boot/dts/dra7-l4.dtsi                     |  48 ++--
 .../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c |   3 +-
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c         |   5 +-
 arch/arm/mach-omap2/pm.c                           | 100 --------
 arch/arm/xen/efi.c                                 |   2 +
 arch/arm64/Kconfig                                 |  17 ++
 arch/arm64/include/asm/cpucaps.h                   |   4 +-
 arch/arm64/kernel/cpu_errata.c                     |  38 +++
 arch/arm64/kernel/entry.S                          |   2 +
 arch/arm64/kvm/hyp/switch.c                        |  69 +++++-
 arch/mips/boot/dts/qca/ar9331.dtsi                 |   2 +-
 arch/mips/loongson64/common/serial.c               |   2 +-
 arch/mips/mm/tlbex.c                               |  23 +-
 arch/parisc/mm/ioremap.c                           |  12 +-
 arch/powerpc/kvm/book3s_xive.c                     |  24 +-
 arch/powerpc/kvm/book3s_xive.h                     |  12 +
 arch/powerpc/kvm/book3s_xive_native.c              |   6 +-
 arch/riscv/include/asm/asm.h                       |   1 +
 arch/riscv/kernel/entry.S                          |  21 +-
 arch/riscv/mm/init.c                               |  12 +-
 arch/s390/boot/startup.c                           |  14 +-
 arch/s390/include/asm/hugetlb.h                    |   9 +-
 arch/s390/include/asm/pgtable.h                    |   3 +-
 arch/s390/kernel/machine_kexec_reloc.c             |   1 +
 arch/x86/hyperv/hv_apic.c                          |  20 +-
 arch/x86/include/asm/uaccess.h                     |  23 ++
 arch/x86/kernel/apic/x2apic_cluster.c              |   3 +-
 arch/x86/kernel/head64.c                           |  22 +-
 arch/x86/xen/efi.c                                 |   2 +
 arch/xtensa/include/asm/bitops.h                   |   2 +-
 arch/xtensa/kernel/xtensa_ksyms.c                  |   7 -
 block/blk-mq.c                                     |   6 +-
 block/blk-rq-qos.h                                 |  13 +-
 drivers/acpi/cppc_acpi.c                           |   2 +-
 drivers/acpi/nfit/core.c                           |   2 +-
 drivers/android/binder.c                           |   7 -
 drivers/android/binder_alloc.c                     |   6 +-
 drivers/ata/ahci.c                                 |   4 +-
 drivers/base/core.c                                |   3 +
 drivers/base/memory.c                              |   3 +
 drivers/block/loop.c                               |  10 +
 drivers/block/zram/zram_drv.c                      |   5 +-
 drivers/clk/ti/clk-7xx.c                           |   6 +-
 drivers/cpufreq/cpufreq.c                          |  10 -
 drivers/edac/ghes_edac.c                           |   4 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c            |  34 ++-
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c             |   8 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |  35 +++
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |  35 ---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c            |  20 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_vce.h            |   1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c            |  35 ++-
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c             |   2 +-
 drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c              |  31 ++-
 drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c              |  33 ++-
 .../drm/amd/display/dc/dce100/dce100_resource.c    |   1 +
 .../drm/amd/display/dc/dce110/dce110_resource.c    |   1 +
 .../drm/amd/display/dc/dce112/dce112_resource.c    |   1 +
 .../drm/amd/display/dc/dce120/dce120_resource.c    |   1 +
 .../gpu/drm/amd/display/dc/dce80/dce80_resource.c  |   1 +
 .../gpu/drm/amd/display/dc/dcn10/dcn10_resource.c  |   1 +
 .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c  |   1 +
 .../drm/arm/display/komeda/komeda_wb_connector.c   |   7 +-
 drivers/gpu/drm/arm/malidp_mw.c                    |   4 +-
 drivers/gpu/drm/drm_atomic.c                       |  13 +-
 drivers/gpu/drm/drm_edid.c                         |   3 +
 drivers/gpu/drm/drm_writeback.c                    |  23 +-
 drivers/gpu/drm/i915/display/intel_bios.c          |  22 +-
 drivers/gpu/drm/i915/gem/i915_gem_mman.c           |   7 +
 drivers/gpu/drm/i915/gem/i915_gem_object.h         |   6 +
 drivers/gpu/drm/i915/gem/i915_gem_object_types.h   |   3 +-
 drivers/gpu/drm/i915/gem/i915_gem_userptr.c        |   1 +
 drivers/gpu/drm/i915/i915_gem.c                    |   3 +
 drivers/gpu/drm/panfrost/panfrost_job.c            |  16 +-
 drivers/gpu/drm/radeon/radeon_drv.c                |   8 -
 drivers/gpu/drm/rcar-du/rcar_du_writeback.c        |   4 +-
 drivers/gpu/drm/ttm/ttm_bo_vm.c                    |  16 +-
 drivers/gpu/drm/vc4/vc4_txp.c                      |   5 +-
 drivers/infiniband/hw/cxgb4/mem.c                  |  28 ++-
 drivers/input/misc/da9063_onkey.c                  |   5 +-
 drivers/input/mouse/elantech.c                     |  55 +++--
 drivers/input/rmi4/rmi_driver.c                    |   6 +-
 drivers/input/touchscreen/st1232.c                 |   6 +-
 drivers/irqchip/irq-sifive-plic.c                  |  29 +--
 drivers/md/dm-cache-target.c                       |  28 +--
 drivers/md/raid0.c                                 |   2 +-
 drivers/memstick/host/jmb38x_ms.c                  |   2 +-
 drivers/mmc/host/cqhci.c                           |   3 +-
 drivers/mmc/host/mxs-mmc.c                         |   7 +-
 drivers/mmc/host/sdhci-omap.c                      |   2 +-
 drivers/net/dsa/qca8k.c                            |   4 +-
 drivers/net/dsa/rtl8366rb.c                        |  16 +-
 drivers/net/ethernet/aquantia/atlantic/aq_main.c   |   4 +-
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c    |  32 +--
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c   |   3 +-
 .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c  |  23 +-
 .../ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c |  17 +-
 .../ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h |   7 +-
 .../aquantia/atlantic/hw_atl/hw_atl_llh_internal.h |  19 ++
 .../aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c   |   2 +-
 drivers/net/ethernet/atheros/ag71xx.c              |   6 +-
 drivers/net/ethernet/broadcom/Kconfig              |   4 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.h     |   1 +
 drivers/net/ethernet/broadcom/genet/bcmmii.c       |  11 +-
 drivers/net/ethernet/hisilicon/hns_mdio.c          |   6 +-
 drivers/net/ethernet/i825xx/lasi_82596.c           |   4 +-
 drivers/net/ethernet/i825xx/lib82596.c             |   4 +-
 drivers/net/ethernet/i825xx/sni_82596.c            |   4 +-
 drivers/net/ethernet/ibm/ibmvnic.c                 |   8 +-
 drivers/net/ethernet/mscc/ocelot_board.c           |  14 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  |  13 +-
 .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c    |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  37 ++-
 drivers/net/ieee802154/ca8210.c                    |   2 +-
 drivers/net/netdevsim/fib.c                        |   3 +-
 drivers/net/phy/mdio_device.c                      |   2 +-
 drivers/net/phy/micrel.c                           |  42 +++-
 drivers/net/phy/phy-c45.c                          |   2 +
 drivers/net/phy/phy.c                              |   8 +-
 drivers/net/phy/phy_device.c                       |   9 +-
 drivers/net/usb/r8152.c                            |   3 +-
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c      | 274 ++++++++++-----------
 drivers/net/xen-netback/interface.c                |   1 -
 drivers/nvme/host/core.c                           | 128 ++++++++--
 drivers/nvme/host/pci.c                            |  23 +-
 drivers/nvme/host/rdma.c                           |  19 +-
 drivers/nvme/host/tcp.c                            |   4 +-
 drivers/of/of_reserved_mem.c                       |   4 +-
 drivers/opp/of.c                                   |   2 -
 drivers/pci/pci.c                                  |  24 +-
 drivers/pinctrl/intel/pinctrl-cherryview.c         |   4 -
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c        |  26 +-
 drivers/s390/crypto/zcrypt_api.c                   |   3 +-
 drivers/s390/scsi/zfcp_fsf.c                       |  16 +-
 drivers/scsi/ch.c                                  |   1 -
 drivers/scsi/megaraid.c                            |   4 +-
 drivers/scsi/qla2xxx/qla_def.h                     |   3 +-
 drivers/scsi/qla2xxx/qla_init.c                    | 109 +++++---
 drivers/scsi/qla2xxx/qla_mbx.c                     |  25 +-
 drivers/scsi/qla2xxx/qla_os.c                      |  11 +-
 drivers/scsi/qla2xxx/qla_target.c                  |  25 +-
 drivers/scsi/scsi_error.c                          |   3 +
 drivers/scsi/scsi_sysfs.c                          |  11 +-
 drivers/scsi/sd.c                                  |   3 +-
 drivers/scsi/ufs/ufshcd.c                          |   3 +
 drivers/staging/wlan-ng/cfg80211.c                 |   6 +-
 drivers/usb/class/usblp.c                          |   4 +-
 drivers/usb/gadget/udc/lpc32xx_udc.c               |   6 +-
 drivers/usb/misc/ldusb.c                           |  23 +-
 drivers/usb/misc/legousbtower.c                    |   5 +-
 drivers/usb/serial/ti_usb_3410_5052.c              |  10 +-
 fs/binfmt_elf.c                                    |  13 +-
 fs/btrfs/ctree.h                                   |   2 -
 fs/btrfs/delalloc-space.c                          |   1 -
 fs/btrfs/disk-io.c                                 |   6 -
 fs/btrfs/extent-tree.c                             |   1 +
 fs/btrfs/file.c                                    |  36 ++-
 fs/btrfs/qgroup.c                                  |   4 +-
 fs/btrfs/relocation.c                              |   2 +
 fs/ceph/mds_client.c                               |  21 +-
 fs/cifs/file.c                                     |   6 +-
 fs/cifs/inode.c                                    |   4 +-
 fs/cifs/smb1ops.c                                  |   3 +
 fs/dax.c                                           |   5 +-
 fs/io_uring.c                                      | 120 +++++----
 fs/ocfs2/journal.c                                 |   3 +-
 fs/ocfs2/localalloc.c                              |   3 +-
 fs/proc/page.c                                     |  28 ++-
 fs/readdir.c                                       | 128 +++++++---
 include/linux/micrel_phy.h                         |   2 +-
 include/linux/mii.h                                |   9 +
 include/linux/skbuff.h                             |   5 +-
 include/linux/uaccess.h                            |   6 +-
 include/scsi/scsi_eh.h                             |   1 +
 include/trace/events/btrfs.h                       |   3 +-
 include/uapi/linux/nvme_ioctl.h                    |  23 ++
 kernel/events/core.c                               |   2 +-
 kernel/trace/trace_event_perf.c                    |   4 +
 lib/textsearch.c                                   |   4 +-
 lib/vdso/gettimeofday.c                            |   9 +-
 mm/compaction.c                                    |   7 +-
 mm/hugetlb.c                                       |   5 +-
 mm/memblock.c                                      |   6 +-
 mm/memory-failure.c                                |  36 +--
 mm/memory_hotplug.c                                |  72 ++----
 mm/memremap.c                                      |  11 +-
 mm/page_owner.c                                    |   5 +-
 mm/slab_common.c                                   |   9 +-
 mm/slub.c                                          |  13 +-
 mm/vmscan.c                                        |   9 +-
 net/core/skbuff.c                                  |  21 +-
 net/ipv4/route.c                                   |  11 +-
 net/ipv6/ip6_input.c                               |   4 +-
 net/mac80211/debugfs_netdev.c                      |  11 +-
 net/mac80211/mlme.c                                |   5 +-
 net/netfilter/nft_connlimit.c                      |   7 +-
 net/openvswitch/actions.c                          |   5 +-
 net/rxrpc/peer_event.c                             |  11 +-
 net/sched/act_api.c                                |  23 +-
 net/sched/act_mpls.c                               |  12 +-
 net/sched/cls_api.c                                |  36 ++-
 net/sched/sch_api.c                                |   3 +-
 net/sched/sch_etf.c                                |   2 +-
 net/sctp/socket.c                                  |   4 +-
 net/wireless/nl80211.c                             |   3 +
 net/wireless/wext-sme.c                            |   8 +-
 scripts/namespace.pl                               |  13 +-
 security/safesetid/securityfs.c                    |   3 +-
 sound/pci/hda/patch_hdmi.c                         |   2 +
 sound/pci/hda/patch_realtek.c                      |  14 ++
 sound/soc/sh/rcar/core.c                           |   1 +
 sound/usb/pcm.c                                    |   3 +
 tools/testing/selftests/kvm/Makefile               |   2 +-
 218 files changed, 1919 insertions(+), 1165 deletions(-)
author maintainer
#1 lore raw

PATCH 1/197 drm: Free the writeback_job when it with an empty fb

From: Lowry Li (Arm Technology China) <[email protected]>

[ Upstream commit 8581d51055a08cc6eb061c8856062290e8582ce4 ]

Adds the check if the writeback_job with an empty fb, then it should be freed in atomic_check phase.

With this change, the driver users will not check empty fb case any more. So refined accordingly.

---
 .../drm/arm/display/komeda/komeda_wb_connector.c    |  3 +--
 drivers/gpu/drm/arm/malidp_mw.c                     |  4 ++--
 drivers/gpu/drm/drm_atomic.c                        | 13 +++++++++----
 drivers/gpu/drm/rcar-du/rcar_du_writeback.c         |  4 ++--
 drivers/gpu/drm/vc4/vc4_txp.c                       |  5 ++---
 5 files changed, 16 insertions(+), 13 deletions(-)
drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c +1 -2
index 2851cac94d869..23fbee268119f 100644
@@ -43,9 +43,8 @@ komeda_wb_encoder_atomic_check(struct drm_encoder *encoder,
 	struct komeda_data_flow_cfg dflow;
 	int err;
 
-	if (!writeback_job || !writeback_job->fb) {
+	if (!writeback_job)
 		return 0;
-	}
 
 	if (!crtc_st->active) {
 		DRM_DEBUG_ATOMIC("Cannot write the composition result out on a inactive CRTC.\n");
drivers/gpu/drm/arm/malidp_mw.c +2 -2
index 2e812525025dd..a59227b2cdb55 100644
@@ -130,7 +130,7 @@ malidp_mw_encoder_atomic_check(struct drm_encoder *encoder,
 	struct drm_framebuffer *fb;
 	int i, n_planes;
 
-	if (!conn_state->writeback_job || !conn_state->writeback_job->fb)
+	if (!conn_state->writeback_job)
 		return 0;
 
 	fb = conn_state->writeback_job->fb;
@@ -247,7 +247,7 @@ void malidp_mw_atomic_commit(struct drm_device *drm,
 
 	mw_state = to_mw_state(conn_state);
 
-	if (conn_state->writeback_job && conn_state->writeback_job->fb) {
+	if (conn_state->writeback_job) {
 		struct drm_framebuffer *fb = conn_state->writeback_job->fb;
 
 		DRM_DEV_DEBUG_DRIVER(drm->dev,
drivers/gpu/drm/drm_atomic.c +9 -4
index 419381abbdd16..14aeaf7363210 100644
@@ -430,10 +430,15 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
 		return -EINVAL;
 	}
 
-	if (writeback_job->out_fence && !writeback_job->fb) {
-		DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n",
-				 connector->base.id, connector->name);
-		return -EINVAL;
+	if (!writeback_job->fb) {
+		if (writeback_job->out_fence) {
+			DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n",
+					 connector->base.id, connector->name);
+			return -EINVAL;
+		}
+
+		drm_writeback_cleanup_job(writeback_job);
+		state->writeback_job = NULL;
 	}
 
 	return 0;
drivers/gpu/drm/rcar-du/rcar_du_writeback.c +2 -2
index ae07290bba6a4..04efa78d70b6e 100644
@@ -147,7 +147,7 @@ static int rcar_du_wb_enc_atomic_check(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_framebuffer *fb;
 
-	if (!conn_state->writeback_job || !conn_state->writeback_job->fb)
+	if (!conn_state->writeback_job)
 		return 0;
 
 	fb = conn_state->writeback_job->fb;
@@ -221,7 +221,7 @@ void rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc,
 	unsigned int i;
 
 	state = rcrtc->writeback.base.state;
-	if (!state || !state->writeback_job || !state->writeback_job->fb)
+	if (!state || !state->writeback_job)
 		return;
 
 	fb = state->writeback_job->fb;
drivers/gpu/drm/vc4/vc4_txp.c +2 -3
index 96f91c1b4b6e6..e92fa12750343 100644
@@ -229,7 +229,7 @@ static int vc4_txp_connector_atomic_check(struct drm_connector *conn,
 	int i;
 
 	conn_state = drm_atomic_get_new_connector_state(state, conn);
-	if (!conn_state->writeback_job || !conn_state->writeback_job->fb)
+	if (!conn_state->writeback_job)
 		return 0;
 
 	crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
@@ -269,8 +269,7 @@ static void vc4_txp_connector_atomic_commit(struct drm_connector *conn,
 	u32 ctrl;
 	int i;
 
-	if (WARN_ON(!conn_state->writeback_job ||
-		    !conn_state->writeback_job->fb))
+	if (WARN_ON(!conn_state->writeback_job))
 		return;
 
 	mode = &conn_state->crtc->state->adjusted_mode;
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 2/197 drm: Clear the fence pointer when writeback job signaled

In reply to Greg Kroah-Hartman

From: Lowry Li (Arm Technology China) <[email protected]>

[ Upstream commit b1066a123538044117f0a78ba8c6a50cf5a04c86 ]

During it signals the completion of a writeback job, after releasing the out_fence, we'd clear the pointer.

Check if fence left over in drm_writeback_cleanup_job(), release it.

---
 drivers/gpu/drm/drm_writeback.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)
drivers/gpu/drm/drm_writeback.c +15 -8
index ff138b6ec48ba..43d9e3bb3a943 100644
@@ -324,6 +324,9 @@ void drm_writeback_cleanup_job(struct drm_writeback_job *job)
 	if (job->fb)
 		drm_framebuffer_put(job->fb);
 
+	if (job->out_fence)
+		dma_fence_put(job->out_fence);
+
 	kfree(job);
 }
 EXPORT_SYMBOL(drm_writeback_cleanup_job);
@@ -366,25 +369,29 @@ drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector,
 {
 	unsigned long flags;
 	struct drm_writeback_job *job;
+	struct dma_fence *out_fence;
 
 	spin_lock_irqsave(&wb_connector->job_lock, flags);
 	job = list_first_entry_or_null(&wb_connector->job_queue,
 				       struct drm_writeback_job,
 				       list_entry);
-	if (job) {
+	if (job)
 		list_del(&job->list_entry);
-		if (job->out_fence) {
-			if (status)
-				dma_fence_set_error(job->out_fence, status);
-			dma_fence_signal(job->out_fence);
-			dma_fence_put(job->out_fence);
-		}
-	}
+
 	spin_unlock_irqrestore(&wb_connector->job_lock, flags);
 
 	if (WARN_ON(!job))
 		return;
 
+	out_fence = job->out_fence;
+	if (out_fence) {
+		if (status)
+			dma_fence_set_error(out_fence, status);
+		dma_fence_signal(out_fence);
+		dma_fence_put(out_fence);
+		job->out_fence = NULL;
+	}
+
 	INIT_WORK(&job->cleanup_work, cleanup_work);
 	queue_work(system_long_wq, &job->cleanup_work);
 }
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 3/197 clk: ti: dra7: Fix mcasp8 clock bits

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit dd8882a255388ba66175098b1560d4f81c100d30 ]

There's a typo for dra7 mcasp clkctrl bit, it should be 22 like the other macasp instances, and not 24. And in dra7xx_clks[] we have the bits wrong way around.

Fixes dffa9051d546 ("clk: ti: dra7: add new clkctrl data")
Cc Michael Turquette <[email protected]>
Cc Stephen Boyd <[email protected]>
Cc Suman Anna <[email protected]>
Cc Tero Kristo <[email protected]>
---
 drivers/clk/ti/clk-7xx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/clk/ti/clk-7xx.c +3 -3
index b57fe09b428be..9dd6185a4b4e2 100644
@@ -683,7 +683,7 @@ static const struct omap_clkctrl_reg_data dra7_l4per2_clkctrl_regs[] __initconst
 	{ DRA7_L4PER2_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0154:22" },
 	{ DRA7_L4PER2_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:015c:22" },
 	{ DRA7_L4PER2_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:016c:22" },
-	{ DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:24" },
+	{ DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:22" },
 	{ DRA7_L4PER2_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:018c:22" },
 	{ DRA7_L4PER2_UART7_CLKCTRL, dra7_uart7_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01c4:24" },
 	{ DRA7_L4PER2_UART8_CLKCTRL, dra7_uart8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01d4:24" },
@@ -828,8 +828,8 @@ static struct ti_dt_clk dra7xx_clks[] = {
 	DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "l4per2-clkctrl:01f8:22"),
 	DT_CLK(NULL, "mcasp7_ahclkx_mux", "l4per2-clkctrl:01fc:24"),
 	DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "l4per2-clkctrl:01fc:22"),
-	DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per2-clkctrl:0184:22"),
-	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per2-clkctrl:0184:24"),
+	DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per2-clkctrl:0184:24"),
+	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per2-clkctrl:0184:22"),
 	DT_CLK(NULL, "mmc1_clk32k", "l3init-clkctrl:0008:8"),
 	DT_CLK(NULL, "mmc1_fclk_div", "l3init-clkctrl:0008:25"),
 	DT_CLK(NULL, "mmc1_fclk_mux", "l3init-clkctrl:0008:24"),
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 4/197 ARM: dts: Fix wrong clocks for dra7 mcasp

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 2d3c8ba3cffa00f76bedb713c8c2126c82d8cd13 ]

The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7. This causes the following warning on beagle-x15:

ti-sysc 48468000.target-module: could not add child clock ahclkr: -19

Also the mcasp clkctrl clock bits are wrong:

For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0:

bit 28 is ahclkr
bit 24 is ahclkx
bit 22 is auxclk
bit 0 is fck

For mcasp3 to 8 we have three clocks at bits 24, 22 and 0.

bit 24 is ahclkx
bit 22 is auxclk
bit 0 is fck

We do not have currently mapped auxclk at bit 22 for the drivers, that can be added if needed.

Fixes 5241ccbf2819 ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports")
Cc Suman Anna <[email protected]>
Cc Tero Kristo <[email protected]>
---
 arch/arm/boot/dts/dra7-l4.dtsi | 48 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 27 deletions(-)
arch/arm/boot/dts/dra7-l4.dtsi +21 -27
index 21e5914fdd620..099d6fe2a57ad 100644
@@ -2762,7 +2762,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
 				dma-names = "tx", "rx";
-				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>,
+				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
 					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
 					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
 				clock-names = "fck", "ahclkx", "ahclkr";
@@ -2799,8 +2799,8 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>,
-					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
 				clock-names = "fck", "ahclkx", "ahclkr";
 				status = "disabled";
@@ -2818,9 +2818,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x68000 0x2000>,
@@ -2836,7 +2835,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2854,9 +2853,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x6c000 0x2000>,
@@ -2872,7 +2870,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2890,9 +2888,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x70000 0x2000>,
@@ -2908,7 +2905,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2926,9 +2923,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x74000 0x2000>,
@@ -2944,7 +2940,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2962,9 +2958,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x78000 0x2000>,
@@ -2980,7 +2975,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
@@ -2998,9 +2993,8 @@
 					<SYSC_IDLE_SMART>;
 			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>,
-				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>;
-			clock-names = "fck", "ahclkx", "ahclkr";
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x7c000 0x2000>,
@@ -3016,7 +3010,7 @@
 				interrupt-names = "tx", "rx";
 				dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
 				dma-names = "tx", "rx";
-				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>,
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
 					 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
 				clock-names = "fck", "ahclkx";
 				status = "disabled";
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/197 nvme-pci: Fix a race in controller removal

In reply to Greg Kroah-Hartman

From: Balbir Singh <[email protected]>

[ Upstream commit b224726de5e496dbf78147a66755c3d81e28bdd2 ]

User space programs like udevd may try to read to partitions at the same time the driver detects a namespace is unusable, and may deadlock if revalidate_disk() is called while such a process is waiting to enter the frozen queue. On detecting a dead namespace, move the disk revalidate after unblocking dispatchers that may be holding bd_butex.

changelog Suggested-by: Keith Busch <[email protected]>

---
 drivers/nvme/host/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/nvme/host/core.c +4 -1
index d3d6b7bd69033..28217cee5e762 100644
@@ -103,10 +103,13 @@ static void nvme_set_queue_dying(struct nvme_ns *ns)
 	 */
 	if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags))
 		return;
-	revalidate_disk(ns->disk);
 	blk_set_queue_dying(ns->queue);
 	/* Forcibly unquiesce queues to avoid blocking dispatch */
 	blk_mq_unquiesce_queue(ns->queue);
+	/*
+	 * Revalidate after unblocking dispatchers that may be holding bd_butex
+	 */
+	revalidate_disk(ns->disk);
 }
 
 static void nvme_queue_scan(struct nvme_ctrl *ctrl)
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/197 scsi: ufs: skip shutdown if hba is not powered

In reply to Greg Kroah-Hartman

From: Stanley Chu <[email protected]>

[ Upstream commit f51913eef23f74c3bd07899dc7f1ed6df9e521d8 ]

In some cases, hba may go through shutdown flow without successful initialization and then make system hang.

For example, if ufshcd_change_power_mode() gets error and leads to ufshcd_hba_exit() to release resources of the host, future shutdown flow may hang the system since the host register will be accessed in unpowered state.

To solve this issue, simply add checking to skip shutdown for above kind of situation.

---
 drivers/scsi/ufs/ufshcd.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/ufs/ufshcd.c +3 -0
index 029da74bb2f5c..e674f6148f698 100644
@@ -8095,6 +8095,9 @@ int ufshcd_shutdown(struct ufs_hba *hba)
 {
 	int ret = 0;
 
+	if (!hba->is_powered)
+		goto out;
+
 	if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba))
 		goto out;
 
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/197 scsi: megaraid: disable device when probe failed after enabled device

In reply to Greg Kroah-Hartman

From: Xiang Chen <[email protected]>

[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ]

For pci device, need to disable device when probe failed after enabled device.

---
 drivers/scsi/megaraid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/megaraid.c +2 -2
index 45a66048801be..ff6d4aa924213 100644
@@ -4183,11 +4183,11 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		 */
 		if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
 		    pdev->subsystem_device == 0xC000)
-		   	return -ENODEV;
+			goto out_disable_device;
 		/* Now check the magic signature byte */
 		pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
 		if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
-			return -ENODEV;
+			goto out_disable_device;
 		/* Ok it is probably a megaraid */
 	}
 
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 8/197 scsi: qla2xxx: Silence fwdump template message

In reply to Greg Kroah-Hartman

From: Himanshu Madhani <[email protected]>

[ Upstream commit 248a445adfc8c33ffd67cf1f2e336578e34f9e21 ]

Print if fwdt template is present or not, only when ql2xextended_error_logging is enabled.

---
 drivers/scsi/qla2xxx/qla_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_init.c +1 -1
index afcd9a8858845..3fbe909744a8f 100644
@@ -3268,7 +3268,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 
 		for (j = 0; j < 2; j++, fwdt++) {
 			if (!fwdt->template) {
-				ql_log(ql_log_warn, vha, 0x00ba,
+				ql_dbg(ql_dbg_init, vha, 0x00ba,
 				    "-> fwdt%u no template\n", j);
 				continue;
 			}
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/197 scsi: qla2xxx: Fix unbound sleep in fcport delete path.

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

[ Upstream commit c3b6a1d397420a0fdd97af2f06abfb78adc370df ]

There are instances, though rare, where a LOGO request cannot be sent out and the thread in free session done can wait indefinitely. Fix this by putting an upper bound to sleep.

---
 drivers/scsi/qla2xxx/qla_target.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/scsi/qla2xxx/qla_target.c +4 -0
index 459c28aa3b94a..f77baf107024f 100644
@@ -1021,6 +1021,7 @@ void qlt_free_session_done(struct work_struct *work)
 
 	if (logout_started) {
 		bool traced = false;
+		u16 cnt = 0;
 
 		while (!READ_ONCE(sess->logout_completed)) {
 			if (!traced) {
@@ -1030,6 +1031,9 @@ void qlt_free_session_done(struct work_struct *work)
 				traced = true;
 			}
 			msleep(100);
+			cnt++;
+			if (cnt > 200)
+				break;
 		}
 
 		ql_dbg(ql_dbg_disc, vha, 0xf087,
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 10/197 scsi: qla2xxx: Fix stale mem access on driver unload

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

[ Upstream commit fd5564ba54e0d8a9e3e823d311b764232e09eb5f ]

On driver unload, 'remove_one' thread was allowed to advance, while session cleanup still lag behind. This patch ensures session deletion will finish before remove_one can advance.

---
 drivers/scsi/qla2xxx/qla_os.c     |  1 +
 drivers/scsi/qla2xxx/qla_target.c | 21 ++++++++-------------
 2 files changed, 9 insertions(+), 13 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +1 -0
index 4fda308c3ef5c..084e39e415ff5 100644
@@ -1153,6 +1153,7 @@ qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha)
 	qla2x00_mark_all_devices_lost(vha, 0);
 
 	wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ);
+	flush_workqueue(vha->hw->wq);
 }
 
 /*
drivers/scsi/qla2xxx/qla_target.c +8 -13
index f77baf107024f..1bb0fc9324ead 100644
@@ -954,7 +954,7 @@ void qlt_free_session_done(struct work_struct *work)
 	struct qla_hw_data *ha = vha->hw;
 	unsigned long flags;
 	bool logout_started = false;
-	scsi_qla_host_t *base_vha;
+	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 	struct qlt_plogi_ack_t *own =
 		sess->plogi_link[QLT_PLOGI_LINK_SAME_WWN];
 
@@ -1106,6 +1106,7 @@ void qlt_free_session_done(struct work_struct *work)
 	}
 
 	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
+	sess->free_pending = 0;
 
 	ql_dbg(ql_dbg_tgt_mgt, vha, 0xf001,
 	    "Unregistration of sess %p %8phC finished fcp_cnt %d\n",
@@ -1114,17 +1115,8 @@ void qlt_free_session_done(struct work_struct *work)
 	if (tgt && (tgt->sess_count == 0))
 		wake_up_all(&tgt->waitQ);
 
-	if (vha->fcport_count == 0)
-		wake_up_all(&vha->fcport_waitQ);
-
-	base_vha = pci_get_drvdata(ha->pdev);
-
-	sess->free_pending = 0;
-
-	if (test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags))
-		return;
-
-	if ((!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) {
+	if (!test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags) &&
+	    (!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) {
 		switch (vha->host->active_mode) {
 		case MODE_INITIATOR:
 		case MODE_DUAL:
@@ -1137,6 +1129,9 @@ void qlt_free_session_done(struct work_struct *work)
 			break;
 		}
 	}
+
+	if (vha->fcport_count == 0)
+		wake_up_all(&vha->fcport_waitQ);
 }
 
 /* ha->tgt.sess_lock supposed to be held on entry */
@@ -1166,7 +1161,7 @@ void qlt_unreg_sess(struct fc_port *sess)
 	sess->last_login_gen = sess->login_gen;
 
 	INIT_WORK(&sess->free_work, qlt_free_session_done);
-	schedule_work(&sess->free_work);
+	queue_work(sess->vha->hw->wq, &sess->free_work);
 }
 EXPORT_SYMBOL(qlt_unreg_sess);
 
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 11/197 scsi: qla2xxx: Fix N2N link reset

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

[ Upstream commit 7f2a398d59d658818f3d219645164676fbbc88e8 ]

Fix stalled link recovery for N2N with FC-NVMe connection.

---
 drivers/scsi/qla2xxx/qla_def.h  |   3 +-
 drivers/scsi/qla2xxx/qla_init.c | 107 +++++++++++++++++++++++---------
 drivers/scsi/qla2xxx/qla_mbx.c  |  23 ++++++-
 drivers/scsi/qla2xxx/qla_os.c   |   4 ++
 4 files changed, 103 insertions(+), 34 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +2 -1
index bad2b12604f1b..a2922b17b55b0 100644
@@ -2338,6 +2338,7 @@ typedef struct fc_port {
 	unsigned int query:1;
 	unsigned int id_changed:1;
 	unsigned int scan_needed:1;
+	unsigned int n2n_flag:1;
 
 	struct completion nvme_del_done;
 	uint32_t nvme_prli_service_param;
@@ -2388,7 +2389,6 @@ typedef struct fc_port {
 	uint8_t fc4_type;
 	uint8_t	fc4f_nvme;
 	uint8_t scan_state;
-	uint8_t n2n_flag;
 
 	unsigned long last_queue_full;
 	unsigned long last_ramp_up;
@@ -2979,6 +2979,7 @@ enum scan_flags_t {
 enum fc4type_t {
 	FS_FC4TYPE_FCP	= BIT_0,
 	FS_FC4TYPE_NVME	= BIT_1,
+	FS_FCP_IS_N2N = BIT_7,
 };
 
 struct fab_scan_rp {
drivers/scsi/qla2xxx/qla_init.c +77 -30

162 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_mbx.c +20 -3
index 133f5f6270ffa..aadff0124f39f 100644
@@ -2257,7 +2257,7 @@ qla2x00_lip_reset(scsi_qla_host_t *vha)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x105a,
+	ql_dbg(ql_dbg_disc, vha, 0x105a,
 	    "Entered %s.\n", __func__);
 
 	if (IS_CNA_CAPABLE(vha->hw)) {
@@ -3891,14 +3891,23 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 		case TOPO_N2N:
 			ha->current_topology = ISP_CFG_N;
 			spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
+			list_for_each_entry(fcport, &vha->vp_fcports, list) {
+				fcport->scan_state = QLA_FCPORT_SCAN;
+				fcport->n2n_flag = 0;
+			}
+
 			fcport = qla2x00_find_fcport_by_wwpn(vha,
 			    rptid_entry->u.f1.port_name, 1);
 			spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
 
 			if (fcport) {
 				fcport->plogi_nack_done_deadline = jiffies + HZ;
-				fcport->dm_login_expire = jiffies + 3*HZ;
+				fcport->dm_login_expire = jiffies + 2*HZ;
 				fcport->scan_state = QLA_FCPORT_FOUND;
+				fcport->n2n_flag = 1;
+				if (vha->flags.nvme_enabled)
+					fcport->fc4f_nvme = 1;
+
 				switch (fcport->disc_state) {
 				case DSC_DELETED:
 					set_bit(RELOGIN_NEEDED,
@@ -3932,7 +3941,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 				    rptid_entry->u.f1.port_name,
 				    rptid_entry->u.f1.node_name,
 				    NULL,
-				    FC4_TYPE_UNKNOWN);
+				    FS_FCP_IS_N2N);
 			}
 
 			/* if our portname is higher then initiate N2N login */
@@ -4031,6 +4040,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 
 		list_for_each_entry(fcport, &vha->vp_fcports, list) {
 			fcport->scan_state = QLA_FCPORT_SCAN;
+			fcport->n2n_flag = 0;
 		}
 
 		fcport = qla2x00_find_fcport_by_wwpn(vha,
@@ -4040,6 +4050,13 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 			fcport->login_retry = vha->hw->login_retry_count;
 			fcport->plogi_nack_done_deadline = jiffies + HZ;
 			fcport->scan_state = QLA_FCPORT_FOUND;
+			fcport->n2n_flag = 1;
+			fcport->d_id.b.domain =
+				rptid_entry->u.f2.remote_nport_id[2];
+			fcport->d_id.b.area =
+				rptid_entry->u.f2.remote_nport_id[1];
+			fcport->d_id.b.al_pa =
+				rptid_entry->u.f2.remote_nport_id[0];
 		}
 	}
 }
drivers/scsi/qla2xxx/qla_os.c +4 -0
index 084e39e415ff5..12d5f50646fba 100644
@@ -5050,6 +5050,10 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
 
 			memcpy(fcport->port_name, e->u.new_sess.port_name,
 			    WWN_SIZE);
+
+			if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N)
+				fcport->n2n_flag = 1;
+
 		} else {
 			ql_dbg(ql_dbg_disc, vha, 0xffff,
 				   "%s %8phC mem alloc fail.\n",
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 12/197 scsi: qla2xxx: Fix N2N link up fail

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

[ Upstream commit f3f1938bb673b1b5ad182c4608f5f8a24921eea3 ]

During link up/bounce, qla driver would do command flush as part of cleanup. In this case, the flush can intefere with FW state. This patch allows FW to be in control of link up.

---
 drivers/scsi/qla2xxx/qla_mbx.c | 2 ++
 drivers/scsi/qla2xxx/qla_os.c  | 6 ++----
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/qla2xxx/qla_mbx.c +2 -0
index aadff0124f39f..abfb9c800ce28 100644
@@ -3905,6 +3905,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 				fcport->dm_login_expire = jiffies + 2*HZ;
 				fcport->scan_state = QLA_FCPORT_FOUND;
 				fcport->n2n_flag = 1;
+				fcport->keep_nport_handle = 1;
 				if (vha->flags.nvme_enabled)
 					fcport->fc4f_nvme = 1;
 
@@ -4050,6 +4051,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 			fcport->login_retry = vha->hw->login_retry_count;
 			fcport->plogi_nack_done_deadline = jiffies + HZ;
 			fcport->scan_state = QLA_FCPORT_FOUND;
+			fcport->keep_nport_handle = 1;
 			fcport->n2n_flag = 1;
 			fcport->d_id.b.domain =
 				rptid_entry->u.f2.remote_nport_id[2];
drivers/scsi/qla2xxx/qla_os.c +2 -4
index 12d5f50646fba..2835afbd2edc7 100644
@@ -5150,11 +5150,9 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
 			if (dfcp)
 				qlt_schedule_sess_for_deletion(tfcp);
 
-
-			if (N2N_TOPO(vha->hw))
-				fcport->flags &= ~FCF_FABRIC_DEVICE;
-
 			if (N2N_TOPO(vha->hw)) {
+				fcport->flags &= ~FCF_FABRIC_DEVICE;
+				fcport->keep_nport_handle = 1;
 				if (vha->flags.nvme_enabled) {
 					fcport->fc4f_nvme = 1;
 					fcport->n2n_flag = 1;
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 13/197 ARM: dts: Fix gpio0 flags for am335x-icev2

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 4ef5d76b453908f21341e661a9b6f96862f6f589 ]

The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings:

dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init

Fixes 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc")
Cc Lokesh Vutla <[email protected]>
---
 arch/arm/boot/dts/am335x-icev2.dts | 2 +-
 arch/arm/boot/dts/am33xx-l4.dtsi   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/am335x-icev2.dts +1 -1
index 18f70b35da4c7..204bccfcc110a 100644
@@ -432,7 +432,7 @@
 	pinctrl-0 = <&mmc0_pins_default>;
 };
 
-&gpio0 {
+&gpio0_target {
 	/* Do not idle the GPIO used for holding the VTT regulator */
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
arch/arm/boot/dts/am33xx-l4.dtsi +1 -1
index 46849d6ecb3e2..1515f4f914999 100644
@@ -127,7 +127,7 @@
 			ranges = <0x0 0x5000 0x1000>;
 		};
 
-		target-module@7000 {			/* 0x44e07000, ap 14 20.0 */
+		gpio0_target: target-module@7000 {	/* 0x44e07000, ap 14 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio1";
 			reg = <0x7000 0x4>,
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 14/197 ARM: OMAP2+: Fix missing reset done flag for am3 and am43

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 8ad8041b98c665b6147e607b749586d6e20ba73a ]

For ti,sysc-omap4 compatible devices with no sysstatus register, we do have reset done status available in the SOFTRESET bit that clears when the reset is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG register. The am335x TRM just says that SOFTRESET bit value 1 means reset is ongoing, but it behaves the same way clearing after reset is done.

With the ti-sysc driver handling this automatically based on no sysstatus register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the legacy platform data:

ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022
...

Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also remove the useless parentheses while at it.

If it turns out we do have ti,sysc-omap4 compatible devices without a working SOFTRESET bit we can set up additional quirk handling for it.

---
 arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +2 -1
index adb6271f819be..7773876d165f1 100644
@@ -811,7 +811,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_RESET_STATUS,
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			  SIDLE_SMART_WKUP),
 	.sysc_fields	= &omap_hwmod_sysc_type2,
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 15/197 ARM: OMAP2+: Add missing LCDC midlemode for am335x

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 17529d43b21c72466e9109d602c6f5c360a1a9e8 ]

TRM "Table 13-34. SYSCONFIG Register Field Descriptions" lists both standbymode and idlemode that should be just the sidle and midle registers where midle is currently unconfigured for lcdc_sysc. As the dts data has been generated based on lcdc_sysc, we now have an empty "ti,sysc-midle" property.

And so we currently get a warning for lcdc because of a difference with dts provided configuration compared to the legacy platform data. This is because lcdc has SYSC_HAS_MIDLEMODE configured in the platform data without configuring the modes.

Let's fix the issue by adding the missing midlemode to lcdc_sysc, and configuring the "ti,sysc-midle" property based on the TRM values.

Fixes f711c575cfec ("ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data")
Cc Jyri Sarha <[email protected]>
Cc Keerthy <[email protected]>
Cc Robert Nelson <[email protected]>
Cc Suman Anna <[email protected]>
---
 arch/arm/boot/dts/am33xx-l4.dtsi           | 4 +++-
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 5 +++--
 2 files changed, 6 insertions(+), 3 deletions(-)
arch/arm/boot/dts/am33xx-l4.dtsi +3 -1
index 1515f4f914999..3287cf695b5a4 100644
@@ -2038,7 +2038,9 @@
 			reg = <0xe000 0x4>,
 			      <0xe054 0x4>;
 			reg-names = "rev", "sysc";
-			ti,sysc-midle ;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
arch/arm/mach-omap2/omap_hwmod_33xx_data.c +3 -2
index c965af275e341..81d9912f17c85 100644
@@ -231,8 +231,9 @@ static struct omap_hwmod am33xx_control_hwmod = {
 static struct omap_hwmod_class_sysconfig lcdc_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x54,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART,
 	.sysc_fields	= &omap_hwmod_sysc_type2,
 };
 
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 16/197 ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit cf395f7ddb9ebc6b2d28d83b53d18aa4e7c19701 ]

This code is currently unable to find the dts opp tables as ti-cpufreq needs to set them up first based on speed binning.

We stopped initializing the opp tables with platform code years ago for device tree based booting with commit 92d51856d740 ("ARM: OMAP3+: do not register non-dt OPP tables for device tree boot"), and all of mach-omap2 is now booting using device tree.

We currently get the following errors on init:

omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
omap2_set_init_voltage: unable to set vdd_mpu
omap2_set_init_voltage: unable to find boot up OPP for vdd_core
omap2_set_init_voltage: unable to set vdd_core
omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
omap2_set_init_voltage: unable to set vdd_iva

Let's just drop the unused code. Nowadays ti-cpufreq should be used to to initialize things properly.

---
 arch/arm/mach-omap2/pm.c | 100 ---------------------------------------
 1 file changed, 100 deletions(-)
arch/arm/mach-omap2/pm.c +0 -100
index 1fde1bf53fb65..7ac9af56762df 100644
@@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
 	return 0;
 }
 
-/*
- * This API is to be called during init to set the various voltage
- * domains to the voltage as per the opp table. Typically we boot up
- * at the nominal voltage. So this function finds out the rate of
- * the clock associated with the voltage domain, finds out the correct
- * opp entry and sets the voltage domain to the voltage specified
- * in the opp entry
- */
-static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
-					 const char *oh_name)
-{
-	struct voltagedomain *voltdm;
-	struct clk *clk;
-	struct dev_pm_opp *opp;
-	unsigned long freq, bootup_volt;
-	struct device *dev;
-
-	if (!vdd_name || !clk_name || !oh_name) {
-		pr_err("%s: invalid parameters\n", __func__);
-		goto exit;
-	}
-
-	if (!strncmp(oh_name, "mpu", 3))
-		/* 
-		 * All current OMAPs share voltage rail and clock
-		 * source, so CPU0 is used to represent the MPU-SS.
-		 */
-		dev = get_cpu_device(0);
-	else
-		dev = omap_device_get_by_hwmod_name(oh_name);
-
-	if (IS_ERR(dev)) {
-		pr_err("%s: Unable to get dev pointer for hwmod %s\n",
-			__func__, oh_name);
-		goto exit;
-	}
-
-	voltdm = voltdm_lookup(vdd_name);
-	if (!voltdm) {
-		pr_err("%s: unable to get vdd pointer for vdd_%s\n",
-			__func__, vdd_name);
-		goto exit;
-	}
-
-	clk =  clk_get(NULL, clk_name);
-	if (IS_ERR(clk)) {
-		pr_err("%s: unable to get clk %s\n", __func__, clk_name);
-		goto exit;
-	}
-
-	freq = clk_get_rate(clk);
-	clk_put(clk);
-
-	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
-	if (IS_ERR(opp)) {
-		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
-			__func__, vdd_name);
-		goto exit;
-	}
-
-	bootup_volt = dev_pm_opp_get_voltage(opp);
-	dev_pm_opp_put(opp);
-
-	if (!bootup_volt) {
-		pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
-		       __func__, vdd_name);
-		goto exit;
-	}
-
-	voltdm_scale(voltdm, bootup_volt);
-	return 0;
-
-exit:
-	pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
-	return -EINVAL;
-}
-
 #ifdef CONFIG_SUSPEND
 static int omap_pm_enter(suspend_state_t suspend_state)
 {
@@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend)
 }
 #endif /* CONFIG_SUSPEND */
 
-static void __init omap3_init_voltages(void)
-{
-	if (!soc_is_omap34xx())
-		return;
-
-	omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
-	omap2_set_init_voltage("core", "l3_ick", "l3_main");
-}
-
-static void __init omap4_init_voltages(void)
-{
-	if (!soc_is_omap44xx())
-		return;
-
-	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
-	omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
-	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
-}
-
 int __maybe_unused omap_pm_nop_init(void)
 {
 	return 0;
@@ -246,10 +150,6 @@ int __init omap2_common_pm_late_init(void)
 	omap4_twl_init();
 	omap_voltage_late_init();
 
-	/* Initialize the voltages */
-	omap3_init_voltages();
-	omap4_init_voltages();
-
 	/* Smartreflex device init */
 	omap_devinit_smartreflex();
 
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/197 nvme-tcp: fix wrong stop condition in io_work

In reply to Greg Kroah-Hartman

From: Wunderlich, Mark <[email protected]>

[ Upstream commit ddef29578a81a1d4d8f2b26a7adbfe21407ee3ea ]

Allow the do/while statement to continue if current time is not after the proposed time 'deadline'. Intent is to allow loop to proceed for a specific time period. Currently the loop, as coded, will exit after first pass.

---
 drivers/nvme/host/tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/nvme/host/tcp.c +2 -2
index 606b13d35d16f..bdadb27b28bbb 100644
@@ -1039,7 +1039,7 @@ static void nvme_tcp_io_work(struct work_struct *w)
 {
 	struct nvme_tcp_queue *queue =
 		container_of(w, struct nvme_tcp_queue, io_work);
-	unsigned long start = jiffies + msecs_to_jiffies(1);
+	unsigned long deadline = jiffies + msecs_to_jiffies(1);
 
 	do {
 		bool pending = false;
@@ -1064,7 +1064,7 @@ static void nvme_tcp_io_work(struct work_struct *w)
 		if (!pending)
 			return;
 
-	} while (time_after(jiffies, start)); /* quota is exhausted */
+	} while (!time_after(jiffies, deadline)); /* quota is exhausted */
 
 	queue_work_on(queue->io_cpu, nvme_tcp_wq, &queue->io_work);
 }
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 18/197 nvme-pci: Save PCI state before putting drive into deepest state

In reply to Greg Kroah-Hartman

From: Mario Limonciello <[email protected]>

[ Upstream commit 7cbb5c6f9aa7cfda7175d82a9cf77a92965b0c5e ]

The action of saving the PCI state will cause numerous PCI configuration space reads which depending upon the vendor implementation may cause the drive to exit the deepest NVMe state.

In these cases ASPM will typically resolve the PCIe link state and APST may resolve the NVMe power state. However it has also been observed that this register access after quiesced will cause PC10 failure on some device combinations.

To resolve this, move the PCI state saving to before SetFeatures has been called. This has been proven to resolve the issue across a 5000 sample test on previously failing disk/system combinations.

---
 drivers/nvme/host/pci.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
drivers/nvme/host/pci.c +10 -7
index 732d5b63ec054..19458e85dab34 100644
@@ -2894,11 +2894,21 @@ static int nvme_suspend(struct device *dev)
 	if (ret < 0)
 		goto unfreeze;
 
+	/*
+	 * A saved state prevents pci pm from generically controlling the
+	 * device's power. If we're using protocol specific settings, we don't
+	 * want pci interfering.
+	 */
+	pci_save_state(pdev);
+
 	ret = nvme_set_power_state(ctrl, ctrl->npss);
 	if (ret < 0)
 		goto unfreeze;
 
 	if (ret) {
+		/* discard the saved state */
+		pci_load_saved_state(pdev, NULL);
+
 		/*
 		 * Clearing npss forces a controller reset on resume. The
 		 * correct value will be resdicovered then.
@@ -2906,14 +2916,7 @@ static int nvme_suspend(struct device *dev)
 		nvme_dev_disable(ndev, true);
 		ctrl->npss = 0;
 		ret = 0;
-		goto unfreeze;
 	}
-	/*
-	 * A saved state prevents pci pm from generically controlling the
-	 * device's power. If we're using protocol specific settings, we don't
-	 * want pci interfering.
-	 */
-	pci_save_state(pdev);
 unfreeze:
 	nvme_unfreeze(ctrl);
 	return ret;
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 19/197 nvme: fix an error code in nvme_init_subsystem()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit bc4f6e06a90ea016855fc67212b4d500145f0b8a ]

"ret" should be a negative error code here, but it's either success or possibly uninitialized.

Fixes 32fd90c40768 ("nvme: change locking for the per-subsystem controller list")
---
 drivers/nvme/host/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/nvme/host/core.c +3 -2
index 28217cee5e762..ac2ac06d870b5 100644
@@ -2513,8 +2513,9 @@ static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 		list_add_tail(&subsys->entry, &nvme_subsystems);
 	}
 
-	if (sysfs_create_link(&subsys->dev.kobj, &ctrl->device->kobj,
-			dev_name(ctrl->device))) {
+	ret = sysfs_create_link(&subsys->dev.kobj, &ctrl->device->kobj,
+				dev_name(ctrl->device));
+	if (ret) {
 		dev_err(ctrl->device,
 			"failed to create sysfs link from subsystem.\n");
 		goto out_put_subsystem;
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/197 nvme-rdma: Fix max_hw_sectors calculation

In reply to Greg Kroah-Hartman

From: Max Gurtovoy <[email protected]>

[ Upstream commit ff13c1b87c97275b82b2af99044b4abf6861b28f ]

By default, the NVMe/RDMA driver should support max io_size of 1MiB (or upto the maximum supported size by the HCA). Currently, one will see that /sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024.

A non power of 2 value can cause performance degradation due to unnecessary splitting of IO requests and unoptimized allocation units.

The number of pages per MR has been fixed here, so there is no longer any need to reduce max_sectors by 1.

---
 drivers/nvme/host/rdma.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/nvme/host/rdma.c +11 -5
index 1a6449bc547b9..cc1956349a2af 100644
@@ -427,7 +427,7 @@ static void nvme_rdma_destroy_queue_ib(struct nvme_rdma_queue *queue)
 static int nvme_rdma_get_max_fr_pages(struct ib_device *ibdev)
 {
 	return min_t(u32, NVME_RDMA_MAX_SEGMENTS,
-		     ibdev->attrs.max_fast_reg_page_list_len);
+		     ibdev->attrs.max_fast_reg_page_list_len - 1);
 }
 
 static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue)
@@ -437,7 +437,7 @@ static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue)
 	const int cq_factor = send_wr_factor + 1;	/* + RECV */
 	int comp_vector, idx = nvme_rdma_queue_idx(queue);
 	enum ib_poll_context poll_ctx;
-	int ret;
+	int ret, pages_per_mr;
 
 	queue->device = nvme_rdma_find_get_device(queue->cm_id);
 	if (!queue->device) {
@@ -479,10 +479,16 @@ static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue)
 		goto out_destroy_qp;
 	}
 
+	/*
+	 * Currently we don't use SG_GAPS MR's so if the first entry is
+	 * misaligned we'll end up using two entries for a single data page,
+	 * so one additional entry is required.
+	 */
+	pages_per_mr = nvme_rdma_get_max_fr_pages(ibdev) + 1;
 	ret = ib_mr_pool_init(queue->qp, &queue->qp->rdma_mrs,
 			      queue->queue_size,
 			      IB_MR_TYPE_MEM_REG,
-			      nvme_rdma_get_max_fr_pages(ibdev), 0);
+			      pages_per_mr, 0);
 	if (ret) {
 		dev_err(queue->ctrl->ctrl.device,
 			"failed to initialize MR pool sized %d for QID %d\n",
@@ -824,8 +830,8 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
 	if (error)
 		goto out_stop_queue;
 
-	ctrl->ctrl.max_hw_sectors =
-		(ctrl->max_fr_pages - 1) << (ilog2(SZ_4K) - 9);
+	ctrl->ctrl.max_segments = ctrl->max_fr_pages;
+	ctrl->ctrl.max_hw_sectors = ctrl->max_fr_pages << (ilog2(SZ_4K) - 9);
 
 	error = nvme_init_identify(&ctrl->ctrl);
 	if (error)
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 21/197 Added QUIRKs for ADATA XPG SX8200 Pro 512GB

In reply to Greg Kroah-Hartman

From: Gabriel Craciunescu <[email protected]>

[ Upstream commit f03e42c6af60f778a6d1ccfb857db9b2ec835279 ]

Booting with default_ps_max_latency_us >6000 makes the device fail. Also SUBNQN is NULL and gives a warning on each boot/resume.

 $ nvme id-ctrl /dev/nvme0 | grep ^subnqn
   subnqn    : (null)

I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop. To be sure is not a Laptop issue only, I tested the device on my server board with the same results.
( with 2x,4x link on the board and 4x link on a PCI-E card ).

---
 drivers/nvme/host/pci.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/nvme/host/pci.c +3 -0
index 19458e85dab34..86763969e7cb0 100644
@@ -3041,6 +3041,9 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_LIGHTNVM, },
 	{ PCI_DEVICE(0x10ec, 0x5762),   /* ADATA SX6000LNP */
 		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+	{ PCI_DEVICE(0x1cc1, 0x8201),   /* ADATA SX8200PNP 512GB */
+		.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
+				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) },
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 22/197 nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T

In reply to Greg Kroah-Hartman

From: Jian-Hong Pan <[email protected]>

[ Upstream commit 19ea025e1d28c629b369c3532a85b3df478cc5c6 ]

Kingston NVME SSD with firmware version E8FK11.T has no interrupt after resume with actions related to suspend to idle. This patch applied NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue.

Fixes d916b1be94b6 ("nvme-pci: use host managed power state for suspend")
---
 drivers/nvme/host/core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/nvme/host/core.c +10 -0
index ac2ac06d870b5..3304e2c8a448a 100644
@@ -2270,6 +2270,16 @@ static const struct nvme_core_quirk_entry core_quirks[] = {
 		.vid = 0x14a4,
 		.fr = "22301111",
 		.quirks = NVME_QUIRK_SIMPLE_SUSPEND,
+	},
+	{
+		/*
+		 * This Kingston E8FK11.T firmware version has no interrupt
+		 * after resume with actions related to suspend to idle
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=204887
+		 */
+		.vid = 0x2646,
+		.fr = "E8FK11.T",
+		.quirks = NVME_QUIRK_SIMPLE_SUSPEND,
 	}
 };
 
Signature · 1 line
2.20.1
author maintainer
#23 lore raw

PATCH 23/197 nvme: allow 64-bit results in passthru commands

In reply to Greg Kroah-Hartman

From: Marta Rybczynska <[email protected]>

[ Upstream commit 65e68edce0db433aa0c2b26d7dc14fbbbeb89fbb ]

It is not possible to get 64-bit results from the passthru commands, what prevents from getting for the Capabilities (CAP) property value.

As a result, it is not possible to implement IOL's NVMe Conformance test 4.3 Case 1 for Fabrics targets [1] (page 123).

This issue has been already discussed [2], but without a solution.

This patch solves the problem by adding new ioctls with a new passthru structure, including 64-bit results. The older ioctls stay unchanged.

[1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf
[2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.html

---
 drivers/nvme/host/core.c        | 108 +++++++++++++++++++++++++++-----
 include/uapi/linux/nvme_ioctl.h |  23 +++++++
 2 files changed, 115 insertions(+), 16 deletions(-)
drivers/nvme/host/core.c +92 -16
index 3304e2c8a448a..36a5ed1eacbea 100644
@@ -852,7 +852,7 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf,
 static int nvme_submit_user_cmd(struct request_queue *q,
 		struct nvme_command *cmd, void __user *ubuffer,
 		unsigned bufflen, void __user *meta_buffer, unsigned meta_len,
-		u32 meta_seed, u32 *result, unsigned timeout)
+		u32 meta_seed, u64 *result, unsigned timeout)
 {
 	bool write = nvme_is_write(cmd);
 	struct nvme_ns *ns = q->queuedata;
@@ -893,7 +893,7 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 	else
 		ret = nvme_req(req)->status;
 	if (result)
-		*result = le32_to_cpu(nvme_req(req)->result.u32);
+		*result = le64_to_cpu(nvme_req(req)->result.u64);
 	if (meta && !ret && !write) {
 		if (copy_to_user(meta_buffer, meta, meta_len))
 			ret = -EFAULT;
@@ -1339,6 +1339,54 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	struct nvme_command c;
 	unsigned timeout = 0;
 	u32 effects;
+	u64 result;
+	int status;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+	if (copy_from_user(&cmd, ucmd, sizeof(cmd)))
+		return -EFAULT;
+	if (cmd.flags)
+		return -EINVAL;
+
+	memset(&c, 0, sizeof(c));
+	c.common.opcode = cmd.opcode;
+	c.common.flags = cmd.flags;
+	c.common.nsid = cpu_to_le32(cmd.nsid);
+	c.common.cdw2[0] = cpu_to_le32(cmd.cdw2);
+	c.common.cdw2[1] = cpu_to_le32(cmd.cdw3);
+	c.common.cdw10 = cpu_to_le32(cmd.cdw10);
+	c.common.cdw11 = cpu_to_le32(cmd.cdw11);
+	c.common.cdw12 = cpu_to_le32(cmd.cdw12);
+	c.common.cdw13 = cpu_to_le32(cmd.cdw13);
+	c.common.cdw14 = cpu_to_le32(cmd.cdw14);
+	c.common.cdw15 = cpu_to_le32(cmd.cdw15);
+
+	if (cmd.timeout_ms)
+		timeout = msecs_to_jiffies(cmd.timeout_ms);
+
+	effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
+	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
+			(void __user *)(uintptr_t)cmd.addr, cmd.data_len,
+			(void __user *)(uintptr_t)cmd.metadata,
+			cmd.metadata_len, 0, &result, timeout);
+	nvme_passthru_end(ctrl, effects);
+
+	if (status >= 0) {
+		if (put_user(result, &ucmd->result))
+			return -EFAULT;
+	}
+
+	return status;
+}
+
+static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+			struct nvme_passthru_cmd64 __user *ucmd)
+{
+	struct nvme_passthru_cmd64 cmd;
+	struct nvme_command c;
+	unsigned timeout = 0;
+	u32 effects;
 	int status;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -1409,6 +1457,41 @@ static void nvme_put_ns_from_disk(struct nvme_ns_head *head, int idx)
 		srcu_read_unlock(&head->srcu, idx);
 }
 
+static bool is_ctrl_ioctl(unsigned int cmd)
+{
+	if (cmd == NVME_IOCTL_ADMIN_CMD || cmd == NVME_IOCTL_ADMIN64_CMD)
+		return true;
+	if (is_sed_ioctl(cmd))
+		return true;
+	return false;
+}
+
+static int nvme_handle_ctrl_ioctl(struct nvme_ns *ns, unsigned int cmd,
+				  void __user *argp,
+				  struct nvme_ns_head *head,
+				  int srcu_idx)
+{
+	struct nvme_ctrl *ctrl = ns->ctrl;
+	int ret;
+
+	nvme_get_ctrl(ns->ctrl);
+	nvme_put_ns_from_disk(head, srcu_idx);
+
+	switch (cmd) {
+	case NVME_IOCTL_ADMIN_CMD:
+		ret = nvme_user_cmd(ctrl, NULL, argp);
+		break;
+	case NVME_IOCTL_ADMIN64_CMD:
+		ret = nvme_user_cmd64(ctrl, NULL, argp);
+		break;
+	default:
+		ret = sed_ioctl(ctrl->opal_dev, cmd, argp);
+		break;
+	}
+	nvme_put_ctrl(ctrl);
+	return ret;
+}
+
 static int nvme_ioctl(struct block_device *bdev, fmode_t mode,
 		unsigned int cmd, unsigned long arg)
 {
@@ -1426,20 +1509,8 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode,
 	 * seperately and drop the ns SRCU reference early.  This avoids a
 	 * deadlock when deleting namespaces using the passthrough interface.
 	 */
-	if (cmd == NVME_IOCTL_ADMIN_CMD || is_sed_ioctl(cmd)) {
-		struct nvme_ctrl *ctrl = ns->ctrl;
-
-		nvme_get_ctrl(ns->ctrl);
-		nvme_put_ns_from_disk(head, srcu_idx);
-
-		if (cmd == NVME_IOCTL_ADMIN_CMD)
-			ret = nvme_user_cmd(ctrl, NULL, argp);
-		else
-			ret = sed_ioctl(ctrl->opal_dev, cmd, argp);
-
-		nvme_put_ctrl(ctrl);
-		return ret;
-	}
+	if (is_ctrl_ioctl(cmd))
+		return nvme_handle_ctrl_ioctl(ns, cmd, argp, head, srcu_idx);
 
 	switch (cmd) {
 	case NVME_IOCTL_ID:
@@ -1452,6 +1523,9 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode,
 	case NVME_IOCTL_SUBMIT_IO:
 		ret = nvme_submit_io(ns, argp);
 		break;
+	case NVME_IOCTL_IO64_CMD:
+		ret = nvme_user_cmd64(ns->ctrl, ns, argp);
+		break;
 	default:
 		if (ns->ndev)
 			ret = nvme_nvm_ioctl(ns, cmd, arg);
@@ -2826,6 +2900,8 @@ static long nvme_dev_ioctl(struct file *file, unsigned int cmd,
 	switch (cmd) {
 	case NVME_IOCTL_ADMIN_CMD:
 		return nvme_user_cmd(ctrl, NULL, argp);
+	case NVME_IOCTL_ADMIN64_CMD:
+		return nvme_user_cmd64(ctrl, NULL, argp);
 	case NVME_IOCTL_IO_CMD:
 		return nvme_dev_user_cmd(ctrl, argp);
 	case NVME_IOCTL_RESET:
include/uapi/linux/nvme_ioctl.h +23 -0
index 1c215ea1798e6..e168dc59e9a0d 100644
@@ -45,6 +45,27 @@ struct nvme_passthru_cmd {
 	__u32	result;
 };
 
+struct nvme_passthru_cmd64 {
+	__u8	opcode;
+	__u8	flags;
+	__u16	rsvd1;
+	__u32	nsid;
+	__u32	cdw2;
+	__u32	cdw3;
+	__u64	metadata;
+	__u64	addr;
+	__u32	metadata_len;
+	__u32	data_len;
+	__u32	cdw10;
+	__u32	cdw11;
+	__u32	cdw12;
+	__u32	cdw13;
+	__u32	cdw14;
+	__u32	cdw15;
+	__u32	timeout_ms;
+	__u64	result;
+};
+
 #define nvme_admin_cmd nvme_passthru_cmd
 
 #define NVME_IOCTL_ID		_IO('N', 0x40)
@@ -54,5 +75,7 @@ struct nvme_passthru_cmd {
 #define NVME_IOCTL_RESET	_IO('N', 0x44)
 #define NVME_IOCTL_SUBSYS_RESET	_IO('N', 0x45)
 #define NVME_IOCTL_RESCAN	_IO('N', 0x46)
+#define NVME_IOCTL_ADMIN64_CMD	_IOWR('N', 0x47, struct nvme_passthru_cmd64)
+#define NVME_IOCTL_IO64_CMD	_IOWR('N', 0x48, struct nvme_passthru_cmd64)
 
 #endif /* _UAPI_LINUX_NVME_IOCTL_H */
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 24/197 drm/komeda: prevent memory leak in komeda_wb_connector_add

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

[ Upstream commit a0ecd6fdbf5d648123a7315c695fb6850d702835 ]

In komeda_wb_connector_add if drm_writeback_connector_init fails the allocated memory for kwb_conn should be released.

---
 drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c +3 -1
index 23fbee268119f..b72840c06ab76 100644
@@ -165,8 +165,10 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
 					   &komeda_wb_encoder_helper_funcs,
 					   formats, n_formats);
 	komeda_put_fourcc_list(formats);
-	if (err)
+	if (err) {
+		kfree(kwb_conn);
 		return err;
+	}
 
 	drm_connector_helper_add(&wb_conn->base, &komeda_wb_conn_helper_funcs);
 
Signature · 1 line
2.20.1
author maintainer
#25 lore raw

PATCH 25/197 nvme-rdma: fix possible use-after-free in connect timeout

In reply to Greg Kroah-Hartman

From: Sagi Grimberg <[email protected]>

[ Upstream commit 67b483dd03c4cd9e90e4c3943132dce514ea4e88 ]

If the connect times out, we may have already destroyed the queue in the timeout handler, so test if the queue is still allocated in the connect error handler.

---
 drivers/nvme/host/rdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/rdma.c +2 -1
index cc1956349a2af..842ef876724f7 100644
@@ -620,7 +620,8 @@ static int nvme_rdma_start_queue(struct nvme_rdma_ctrl *ctrl, int idx)
 	if (!ret) {
 		set_bit(NVME_RDMA_Q_LIVE, &queue->flags);
 	} else {
-		__nvme_rdma_stop_queue(queue);
+		if (test_bit(NVME_RDMA_Q_ALLOCATED, &queue->flags))
+			__nvme_rdma_stop_queue(queue);
 		dev_info(ctrl->ctrl.device,
 			"failed to connect queue: %d ret=%d\n", idx, ret);
 	}
Signature · 1 line
2.20.1
author maintainer
#26 lore raw

PATCH 26/197 blk-mq: honor IO scheduler for multiqueue devices

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

[ Upstream commit a12de1d42d74ef3c80e9fb9a2da94daaef747869 ]

If a device is using multiple queues, the IO scheduler may be bypassed. This may hurt performance for some slow MQ devices, and it also breaks zoned devices which depend on mq-deadline for respecting the write order in one zone.

Don't bypass io scheduler if we have one setup.

This patch can double sequential write performance basically on MQ scsi_debug when mq-deadline is applied.

---
 block/blk-mq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
block/blk-mq.c +4 -2
index a79b9ad1aba18..ed41cde93641c 100644
@@ -1998,6 +1998,8 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 		}
 
 		blk_add_rq_to_plug(plug, rq);
+	} else if (q->elevator) {
+		blk_mq_sched_insert_request(rq, false, true, true);
 	} else if (plug && !blk_queue_nomerges(q)) {
 		/*
 		 * We do limited plugging. If the bio can be merged, do that.
@@ -2021,8 +2023,8 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 			blk_mq_try_issue_directly(data.hctx, same_queue_rq,
 					&cookie);
 		}
-	} else if ((q->nr_hw_queues > 1 && is_sync) || (!q->elevator &&
-			!data.hctx->dispatch_busy)) {
+	} else if ((q->nr_hw_queues > 1 && is_sync) ||
+			!data.hctx->dispatch_busy) {
 		blk_mq_try_issue_directly(data.hctx, rq, &cookie);
 	} else {
 		blk_mq_sched_insert_request(rq, false, true, true);
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 27/197 ieee802154: ca8210: prevent memory leak

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

[ Upstream commit 6402939ec86eaf226c8b8ae00ed983936b164908 ]

In ca8210_probe the allocated pdata needs to be assigned to spi_device->dev.platform_data before calling ca8210_get_platform_data. Othrwise when ca8210_get_platform_data fails pdata cannot be released.

---
 drivers/net/ieee802154/ca8210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ieee802154/ca8210.c +1 -1
index b188fce3f6410..658b399ac9eac 100644
@@ -3152,12 +3152,12 @@ static int ca8210_probe(struct spi_device *spi_device)
 		goto error;
 	}
 
+	priv->spi->dev.platform_data = pdata;
 	ret = ca8210_get_platform_data(priv->spi, pdata);
 	if (ret) {
 		dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n");
 		goto error;
 	}
-	priv->spi->dev.platform_data = pdata;
 
 	ret = ca8210_dev_com_init(priv);
 	if (ret) {
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 28/197 ARM: dts: am4372: Set memory bandwidth limit for DISPC

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit f90ec6cdf674248dcad85bf9af6e064bf472b841 ]

Set memory bandwidth limit to filter out resolutions above 720p@60Hz to avoid underflow errors due to the bandwidth needs of higher resolutions.

am43xx can not provide enough bandwidth to DISPC to correctly handle 'high' resolutions.

---
 arch/arm/boot/dts/am4372.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/am4372.dtsi +2 -0
index 848e2a8884e2c..14bbc438055fd 100644
@@ -337,6 +337,8 @@
 				ti,hwmods = "dss_dispc";
 				clocks = <&disp_clk>;
 				clock-names = "fck";
+
+				max-memory-bandwidth = <230000000>;
 			};
 
 			rfbi: rfbi@4832a800 {
Signature · 1 line
2.20.1
author maintainer
#29 lore raw

PATCH 29/197 net: dsa: qca8k: Use up to 7 ports for all operations

In reply to Greg Kroah-Hartman

From: Michal Vokáč <[email protected]>

[ Upstream commit 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 ]

The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports.

This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content.

Fixes 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Fixes a0c02161ecfc ("net: dsa: variable number of ports")
Fixes 0394a63acfe2 ("net: dsa: enable and disable all ports")
---
 drivers/net/dsa/qca8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/dsa/qca8k.c +2 -2
index 16f15c93a102c..bbeeb8618c80c 100644
@@ -705,7 +705,7 @@ qca8k_setup(struct dsa_switch *ds)
 		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
 
 	/* Setup connection between CPU port & user ports */
-	for (i = 0; i < DSA_MAX_PORTS; i++) {
+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
 		/* CPU port gets connected to all user ports of the switch */
 		if (dsa_is_cpu_port(ds, i)) {
 			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
@@ -1074,7 +1074,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	if (id != QCA8K_ID_QCA8337)
 		return -ENODEV;
 
-	priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+	priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS);
 	if (!priv->ds)
 		return -ENOMEM;
 
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 30/197 MIPS: dts: ar9331: fix interrupt-controller size

In reply to Greg Kroah-Hartman

From: Oleksij Rempel <[email protected]>

[ Upstream commit 0889d07f3e4b171c453b2aaf2b257f9074cdf624 ]

It is two registers each of 4 byte.

---
 arch/mips/boot/dts/qca/ar9331.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/boot/dts/qca/ar9331.dtsi +1 -1
index 63a9f33aa43e8..5cfc9d347826a 100644
@@ -99,7 +99,7 @@
 
 			miscintc: interrupt-controller@18060010 {
 				compatible = "qca,ar7240-misc-intc";
-				reg = <0x18060010 0x4>;
+				reg = <0x18060010 0x8>;
 
 				interrupt-parent = <&cpuintc>;
 				interrupts = <6>;
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 31/197 xen/efi: Set nonblocking callbacks

In reply to Greg Kroah-Hartman

From: Ross Lagerwall <[email protected]>

[ Upstream commit df359f0d09dc029829b66322707a2f558cb720f7 ]

Other parts of the kernel expect these nonblocking EFI callbacks to exist and crash when running under Xen. Since the implementations of xen_efi_set_variable() and xen_efi_query_variable_info() do not take any locks, use them for the nonblocking callbacks too.

---
 arch/arm/xen/efi.c | 2 ++
 arch/x86/xen/efi.c | 2 ++
 2 files changed, 4 insertions(+)
arch/arm/xen/efi.c +2 -0
index d687a73044bfa..cb2aaf98e243d 100644
@@ -19,7 +19,9 @@ void __init xen_efi_runtime_setup(void)
 	efi.get_variable             = xen_efi_get_variable;
 	efi.get_next_variable        = xen_efi_get_next_variable;
 	efi.set_variable             = xen_efi_set_variable;
+	efi.set_variable_nonblocking = xen_efi_set_variable;
 	efi.query_variable_info      = xen_efi_query_variable_info;
+	efi.query_variable_info_nonblocking = xen_efi_query_variable_info;
 	efi.update_capsule           = xen_efi_update_capsule;
 	efi.query_capsule_caps       = xen_efi_query_capsule_caps;
 	efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;
arch/x86/xen/efi.c +2 -0
index 0d3365cb64de0..7e3eb70f411ab 100644
@@ -65,7 +65,9 @@ static efi_system_table_t __init *xen_efi_probe(void)
 	efi.get_variable             = xen_efi_get_variable;
 	efi.get_next_variable        = xen_efi_get_next_variable;
 	efi.set_variable             = xen_efi_set_variable;
+	efi.set_variable_nonblocking = xen_efi_set_variable;
 	efi.query_variable_info      = xen_efi_query_variable_info;
+	efi.query_variable_info_nonblocking = xen_efi_query_variable_info;
 	efi.update_capsule           = xen_efi_update_capsule;
 	efi.query_capsule_caps       = xen_efi_query_capsule_caps;
 	efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 32/197 loop: change queue block size to match when using DIO

In reply to Greg Kroah-Hartman

From: Martijn Coenen <[email protected]>

[ Upstream commit 85560117d00f5d528e928918b8f61cadcefff98b ]

The loop driver assumes that if the passed in fd is opened with O_DIRECT, the caller wants to use direct I/O on the loop device. However, if the underlying block device has a different block size than the loop block queue, direct I/O can't be enabled. Instead of requiring userspace to manually change the blocksize and re-enable direct I/O, just change the queue block sizes to match, as well as the io_min size.

---
 drivers/block/loop.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/block/loop.c +10 -0
index 1410fa8936538..f6f77eaa7217e 100644
@@ -994,6 +994,16 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 	if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
 		blk_queue_write_cache(lo->lo_queue, true, false);
 
+	if (io_is_direct(lo->lo_backing_file) && inode->i_sb->s_bdev) {
+		/* In case of direct I/O, match underlying block size */
+		unsigned short bsize = bdev_logical_block_size(
+			inode->i_sb->s_bdev);
+
+		blk_queue_logical_block_size(lo->lo_queue, bsize);
+		blk_queue_physical_block_size(lo->lo_queue, bsize);
+		blk_queue_io_min(lo->lo_queue, bsize);
+	}
+
 	loop_update_rotational(lo);
 	loop_update_dio(lo);
 	set_capacity(lo->lo_disk, size);
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 33/197 nl80211: fix null pointer dereference

In reply to Greg Kroah-Hartman

From: Miaoqing Pan <[email protected]>

[ Upstream commit b501426cf86e70649c983c52f4c823b3c40d72a3 ]

If the interface is not in MESH mode, the command 'iw wlanx mpath del' will cause kernel panic.

The root cause is null pointer access in mpp_flush_by_proxy(), as the pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface.

Unable to handle kernel NULL pointer dereference at virtual address 00000068

[...]
PC is at _raw_spin_lock_bh+0x20/0x5c
LR is at mesh_path_del+0x1c/0x17c [mac80211]
[...]
Process iw (pid: 4537, stack limit = 0xd83e0238)
[...]
[<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211]) [<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat]) [<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c) [<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac) [<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34) [<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204) [<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370) [<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84) [<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228) [<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70) [<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44)

Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f)
---[ end trace bbd717600f8f884d ]---
---
 net/wireless/nl80211.c | 3 +++
 1 file changed, 3 insertions(+)
net/wireless/nl80211.c +3 -0
index f03459ddc840a..c2ce582ea1437 100644
@@ -6184,6 +6184,9 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (!rdev->ops->del_mpath)
 		return -EOPNOTSUPP;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
 	return rdev_del_mpath(rdev, dev, dst);
 }
 
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 34/197 mac80211: fix txq null pointer dereference

In reply to Greg Kroah-Hartman

From: Miaoqing Pan <[email protected]>

[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ]

If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL.

Unable to handle kernel NULL pointer dereference at virtual address 00000011
CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1

task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...]
Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...]

[<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211]
[<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211]
[<ffffff80082eff94>] full_proxy_read+0x2c/0x48
[<ffffff80081eef00>] __vfs_read+0x2c/0xd4
[<ffffff80081ef084>] vfs_read+0x8c/0x108
[<ffffff80081ef494>] SyS_read+0x40/0x7c
---
 net/mac80211/debugfs_netdev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
net/mac80211/debugfs_netdev.c +9 -2
index b1438fd4d8760..64b544ae9966b 100644
@@ -487,9 +487,14 @@ static ssize_t ieee80211_if_fmt_aqm(
 	const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct txq_info *txqi = to_txq_info(sdata->vif.txq);
+	struct txq_info *txqi;
 	int len;
 
+	if (!sdata->vif.txq)
+		return 0;
+
+	txqi = to_txq_info(sdata->vif.txq);
+
 	spin_lock_bh(&local->fq.lock);
 	rcu_read_lock();
 
@@ -658,7 +663,9 @@ static void add_common_files(struct ieee80211_sub_if_data *sdata)
 	DEBUGFS_ADD(rc_rateidx_vht_mcs_mask_5ghz);
 	DEBUGFS_ADD(hw_queues);
 
-	if (sdata->local->ops->wake_tx_queue)
+	if (sdata->local->ops->wake_tx_queue &&
+	    sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE &&
+	    sdata->vif.type != NL80211_IFTYPE_NAN)
 		DEBUGFS_ADD(aqm);
 }
 
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 35/197 netfilter: nft_connlimit: disable bh on garbage collection

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 34a4c95abd25ab41fb390b985a08a651b1fa0b0f ]

BH must be disabled when invoking nf_conncount_gc_list() to perform garbage collection, otherwise deadlock might happen.

  nf_conncount_add+0x1f/0x50 [nf_conncount]
  nft_connlimit_eval+0x4c/0xe0 [nft_connlimit]
  nft_dynset_eval+0xb5/0x100 [nf_tables]
  nft_do_chain+0xea/0x420 [nf_tables]
  ? sch_direct_xmit+0x111/0x360
  ? noqueue_init+0x10/0x10
  ? __qdisc_run+0x84/0x510
  ? tcp_packet+0x655/0x1610 [nf_conntrack]
  ? ip_finish_output2+0x1a7/0x430
  ? tcp_error+0x130/0x150 [nf_conntrack]
  ? nf_conntrack_in+0x1fc/0x4c0 [nf_conntrack]
  nft_do_chain_ipv4+0x66/0x80 [nf_tables]
  nf_hook_slow+0x44/0xc0
  ip_rcv+0xb5/0xd0
  ? ip_rcv_finish_core.isra.19+0x360/0x360
  __netif_receive_skb_one_core+0x52/0x70
  netif_receive_skb_internal+0x34/0xe0
  napi_gro_receive+0xba/0xe0
  e1000_clean_rx_irq+0x1e9/0x420 [e1000e]
  e1000e_poll+0xbe/0x290 [e1000e]
  net_rx_action+0x149/0x3b0
  __do_softirq+0xde/0x2d8
  irq_exit+0xba/0xc0
  do_IRQ+0x85/0xd0
  common_interrupt+0xf/0xf
  </IRQ>
  RIP: 0010:nf_conncount_gc_list+0x3b/0x130 [nf_conncount]
Fixes 2f971a8f4255 ("netfilter: nf_conncount: move all list iterations under spinlock")
---
 net/netfilter/nft_connlimit.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
net/netfilter/nft_connlimit.c +6 -1
index af1497ab94642..69d6173f91e2b 100644
@@ -218,8 +218,13 @@ static void nft_connlimit_destroy_clone(const struct nft_ctx *ctx,
 static bool nft_connlimit_gc(struct net *net, const struct nft_expr *expr)
 {
 	struct nft_connlimit *priv = nft_expr_priv(expr);
+	bool ret;
 
-	return nf_conncount_gc_list(net, &priv->list);
+	local_bh_disable();
+	ret = nf_conncount_gc_list(net, &priv->list);
+	local_bh_enable();
+
+	return ret;
 }
 
 static struct nft_expr_type nft_connlimit_type;
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 36/197 net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

[ Upstream commit d2c50b1cd94528aea8c8e9abb4cce81590f32cc4 ]

of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using.
In both cases of success and failure, we need to release 'ports', so clean up the code using goto.

Fixes a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Cc Alexandre Belloni <[email protected]>
Cc Microchip Linux Driver Support <[email protected]>
Cc "David S. Miller" <[email protected]>
---
 drivers/net/ethernet/mscc/ocelot_board.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/ethernet/mscc/ocelot_board.c +8 -6
index 2451d4a96490b..041fb9f38ecaa 100644
@@ -287,13 +287,14 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 			continue;
 
 		phy = of_phy_find_device(phy_node);
+		of_node_put(phy_node);
 		if (!phy)
 			continue;
 
 		err = ocelot_probe_port(ocelot, port, regs, phy);
 		if (err) {
 			of_node_put(portnp);
-			return err;
+			goto out_put_ports;
 		}
 
 		phy_mode = of_get_phy_mode(portnp);
@@ -321,7 +322,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 				"invalid phy mode for port%d, (Q)SGMII only\n",
 				port);
 			of_node_put(portnp);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out_put_ports;
 		}
 
 		serdes = devm_of_phy_get(ocelot->dev, portnp, NULL);
@@ -334,7 +336,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 					"missing SerDes phys for port%d\n",
 					port);
 
-			goto err_probe_ports;
+			of_node_put(portnp);
+			goto out_put_ports;
 		}
 
 		ocelot->ports[port]->serdes = serdes;
@@ -346,9 +349,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "Ocelot switch probed\n");
 
-	return 0;
-
-err_probe_ports:
+out_put_ports:
+	of_node_put(ports);
 	return err;
 }
 
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 37/197 net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

[ Upstream commit f32eb9d80470dab05df26b6efd02d653c72e6a11 ]

of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released.

Fixes d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc Linus Walleij <[email protected]>
Cc Andrew Lunn <[email protected]>
Cc Vivien Didelot <[email protected]>
Cc Florian Fainelli <[email protected]>
Cc "David S. Miller" <[email protected]>
---
 drivers/net/dsa/rtl8366rb.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/net/dsa/rtl8366rb.c +10 -6
index a268085ffad28..f5cc8b0a7c74c 100644
@@ -507,7 +507,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 	irq = of_irq_get(intc, 0);
 	if (irq <= 0) {
 		dev_err(smi->dev, "failed to get parent IRQ\n");
-		return irq ? irq : -EINVAL;
+		ret = irq ? irq : -EINVAL;
+		goto out_put_node;
 	}
 
 	/* This clears the IRQ status register */
@@ -515,7 +516,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 			  &val);
 	if (ret) {
 		dev_err(smi->dev, "can't read interrupt status\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	/* Fetch IRQ edge information from the descriptor */
@@ -537,7 +538,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 				 val);
 	if (ret) {
 		dev_err(smi->dev, "could not configure IRQ polarity\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	ret = devm_request_threaded_irq(smi->dev, irq, NULL,
@@ -545,7 +546,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					"RTL8366RB", smi);
 	if (ret) {
 		dev_err(smi->dev, "unable to request irq: %d\n", ret);
-		return ret;
+		goto out_put_node;
 	}
 	smi->irqdomain = irq_domain_add_linear(intc,
 					       RTL8366RB_NUM_INTERRUPT,
@@ -553,12 +554,15 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					       smi);
 	if (!smi->irqdomain) {
 		dev_err(smi->dev, "failed to create IRQ domain\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_put_node;
 	}
 	for (i = 0; i < smi->num_ports; i++)
 		irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
 
-	return 0;
+out_put_node:
+	of_node_put(intc);
+	return ret;
 }
 
 static int rtl8366rb_set_addr(struct realtek_smi *smi)
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 38/197 net: stmmac: xgmac: Not all Unicast addresses may be available

In reply to Greg Kroah-Hartman

From: Jose Abreu <[email protected]>

[ Upstream commit 9a2ae7b3960eb2426a8560cbc3251e3453230d21 ]

Some setups may not have all Unicast addresses filters available. Let's check this before trying to setup filters.

Fixes 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests")
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +1 -1
index 85c68b7ee8c6a..46d74f407aab6 100644
@@ -370,7 +370,7 @@ static void dwxgmac2_set_filter(struct mac_device_info *hw,
 	dwxgmac2_set_mchash(ioaddr, mc_filter, mcbitslog2);
 
 	/* Handle multiple unicast addresses */
-	if (netdev_uc_count(dev) > XGMAC_ADDR_MAX) {
+	if (netdev_uc_count(dev) > hw->unicast_filter_entries) {
 		value |= XGMAC_FILTER_PR;
 	} else {
 		struct netdev_hw_addr *ha;
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 39/197 net: stmmac: dwmac4: Always update the MAC Hash Filter

In reply to Greg Kroah-Hartman

From: Jose Abreu <[email protected]>

[ Upstream commit f79bfda3756c50a86c0ee65091935c42c5bbe0cb ]

We need to always update the MAC Hash Filter so that previous entries are invalidated.

Found out while running stmmac selftests.

Fixes b8ef7020d6e5 ("net: stmmac: add support for hash table size 128/256 in dwmac4")
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +7 -6
index fc9954e4a7729..9c73fb759b575 100644
@@ -407,8 +407,11 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 	int numhashregs = (hw->multicast_filter_bins >> 5);
 	int mcbitslog2 = hw->mcast_bits_log2;
 	unsigned int value;
+	u32 mc_filter[8];
 	int i;
 
+	memset(mc_filter, 0, sizeof(mc_filter));
+
 	value = readl(ioaddr + GMAC_PACKET_FILTER);
 	value &= ~GMAC_PACKET_FILTER_HMC;
 	value &= ~GMAC_PACKET_FILTER_HPF;
@@ -422,16 +425,13 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 		/* Pass all multi */
 		value |= GMAC_PACKET_FILTER_PM;
 		/* Set all the bits of the HASH tab */
-		for (i = 0; i < numhashregs; i++)
-			writel(0xffffffff, ioaddr + GMAC_HASH_TAB(i));
+		memset(mc_filter, 0xff, sizeof(mc_filter));
 	} else if (!netdev_mc_empty(dev)) {
 		struct netdev_hw_addr *ha;
-		u32 mc_filter[8];
 
 		/* Hash filter for multicast */
 		value |= GMAC_PACKET_FILTER_HMC;
 
-		memset(mc_filter, 0, sizeof(mc_filter));
 		netdev_for_each_mc_addr(ha, dev) {
 			/* The upper n bits of the calculated CRC are used to
 			 * index the contents of the hash table. The number of
@@ -446,10 +446,11 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 			 */
 			mc_filter[bit_nr >> 5] |= (1 << (bit_nr & 0x1f));
 		}
-		for (i = 0; i < numhashregs; i++)
-			writel(mc_filter[i], ioaddr + GMAC_HASH_TAB(i));
 	}
 
+	for (i = 0; i < numhashregs; i++)
+		writel(mc_filter[i], ioaddr + GMAC_HASH_TAB(i));
+
 	value |= GMAC_PACKET_FILTER_HPF;
 
 	/* Handle multiple unicast addresses */
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/197 net: stmmac: Correctly take timestamp for PTPv2

In reply to Greg Kroah-Hartman

From: Jose Abreu <[email protected]>

[ Upstream commit 14f347334bf232074616e29e29103dd0c7c54dec ]

The case for PTPV2_EVENT requires event packets to be captured so add this setting to the list of enabled captures.

Fixes 891434b18ec0 ("stmmac: add IEEE PTPv1 and PTPv2 support.")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +1 -0
index 5c4408bdc843a..ade85ca9d8c7f 100644
@@ -626,6 +626,7 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
 			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
 			ptp_v2 = PTP_TCR_TSVER2ENA;
 			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
+			ts_event_en = PTP_TCR_TSEVNTENA;
 			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 			ptp_over_ethernet = PTP_TCR_TSIPENA;
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/197 net: stmmac: Do not stop PHY if WoL is enabled

In reply to Greg Kroah-Hartman

From: Jose Abreu <[email protected]>

[ Upstream commit 3e2bf04fb0447aa4b967b8000125178f55ae7800 ]

If WoL is enabled we can't really stop the PHY, otherwise we will not receive the WoL packet. Fix this by telling phylink that only the MAC is down and only stop the PHY if WoL is not enabled.

Fixes 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c  | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +12 -6
index ade85ca9d8c7f..69cc9133336fc 100644
@@ -4456,9 +4456,7 @@ int stmmac_suspend(struct device *dev)
 
 	mutex_lock(&priv->lock);
 
-	rtnl_lock();
-	phylink_stop(priv->phylink);
-	rtnl_unlock();
+	phylink_mac_change(priv->phylink, false);
 
 	netif_device_detach(ndev);
 	stmmac_stop_all_queues(priv);
@@ -4473,6 +4471,10 @@ int stmmac_suspend(struct device *dev)
 		stmmac_pmt(priv, priv->hw, priv->wolopts);
 		priv->irq_wake = 1;
 	} else {
+		rtnl_lock();
+		phylink_stop(priv->phylink);
+		rtnl_unlock();
+
 		stmmac_mac_set(priv, priv->ioaddr, false);
 		pinctrl_pm_select_sleep_state(priv->device);
 		/* Disable clock in case of PWM is off */
@@ -4563,9 +4565,13 @@ int stmmac_resume(struct device *dev)
 
 	stmmac_start_all_queues(priv);
 
-	rtnl_lock();
-	phylink_start(priv->phylink);
-	rtnl_unlock();
+	if (!device_may_wakeup(priv->device)) {
+		rtnl_lock();
+		phylink_start(priv->phylink);
+		rtnl_unlock();
+	}
+
+	phylink_mac_change(priv->phylink, true);
 
 	mutex_unlock(&priv->lock);
 
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 42/197 net: ag71xx: fix mdio subnode support

In reply to Greg Kroah-Hartman

From: Oleksij Rempel <[email protected]>

[ Upstream commit 569aad4fcd82cba64eb10ede235d330a00f0aa09 ]

This patch is syncing driver with actual devicetree documentation:
Documentation/devicetree/bindings/net/qca,ar71xx.txt

|Optional subnodes:
|- mdio : specifies the mdio bus, used as a container for phy nodes
|  according to phy.txt in the same directory

The driver was working with fixed phy without any noticeable issues. This bug was uncovered by introducing dsa ar9331-switch driver.
Since no one reported this bug until now, I assume no body is using it and this patch should not brake existing system.

Fixes d51b6ce441d3 ("net: ethernet: add ag71xx driver")
---
 drivers/net/ethernet/atheros/ag71xx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/atheros/ag71xx.c +4 -2
index 6703960c7cf50..d1101eea15c2a 100644
@@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
 	struct device *dev = &ag->pdev->dev;
 	struct net_device *ndev = ag->ndev;
 	static struct mii_bus *mii_bus;
-	struct device_node *np;
+	struct device_node *np, *mnp;
 	int err;
 
 	np = dev->of_node;
@@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
 		msleep(200);
 	}
 
-	err = of_mdiobus_register(mii_bus, np);
+	mnp = of_get_child_by_name(np, "mdio");
+	err = of_mdiobus_register(mii_bus, mnp);
+	of_node_put(mnp);
 	if (err)
 		goto mdio_err_put_clk;
 
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/197 RISC-V: Clear load reservations while restoring hart contexts

In reply to Greg Kroah-Hartman

From: Palmer Dabbelt <[email protected]>

[ Upstream commit 18856604b3e7090ce42d533995173ee70c24b1c9 ]

This is almost entirely a comment. The bug is unlikely to manifest on existing hardware because there is a timeout on load reservations, but manifests on QEMU because there is no timeout.

---
 arch/riscv/include/asm/asm.h |  1 +
 arch/riscv/kernel/entry.S    | 21 ++++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)
arch/riscv/include/asm/asm.h +1 -0
index 5a02b7d509408..9c992a88d858f 100644
@@ -22,6 +22,7 @@
 
 #define REG_L		__REG_SEL(ld, lw)
 #define REG_S		__REG_SEL(sd, sw)
+#define REG_SC		__REG_SEL(sc.d, sc.w)
 #define SZREG		__REG_SEL(8, 4)
 #define LGREG		__REG_SEL(3, 2)
 
arch/riscv/kernel/entry.S +20 -1
index 9b60878a4469c..2a82e0a5af46e 100644
@@ -98,7 +98,26 @@ _save_context:
  */
 	.macro RESTORE_ALL
 	REG_L a0, PT_SSTATUS(sp)
-	REG_L a2, PT_SEPC(sp)
+	/*
+	 * The current load reservation is effectively part of the processor's
+	 * state, in the sense that load reservations cannot be shared between
+	 * different hart contexts.  We can't actually save and restore a load
+	 * reservation, so instead here we clear any existing reservation --
+	 * it's always legal for implementations to clear load reservations at
+	 * any point (as long as the forward progress guarantee is kept, but
+	 * we'll ignore that here).
+	 *
+	 * Dangling load reservations can be the result of taking a trap in the
+	 * middle of an LR/SC sequence, but can also be the result of a taken
+	 * forward branch around an SC -- which is how we implement CAS.  As a
+	 * result we need to clear reservations between the last CAS and the
+	 * jump back to the new context.  While it is unlikely the store
+	 * completes, implementations are allowed to expand reservations to be
+	 * arbitrarily large.
+	 */
+	REG_L  a2, PT_SEPC(sp)
+	REG_SC x0, a2, PT_SEPC(sp)
+
 	csrw CSR_SSTATUS, a0
 	csrw CSR_SEPC, a2
 
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/197 riscv: Fix memblock reservation for device tree blob

In reply to Greg Kroah-Hartman

From: Albert Ou <[email protected]>

[ Upstream commit 922b0375fc93fb1a20c5617e37c389c26bbccb70 ]

This fixes an error with how the FDT blob is reserved in memblock. An incorrect physical address calculation exposed the FDT header to unintended corruption, which typically manifested with of_fdt_raw_init() faulting during late boot after fdt_totalsize() returned a wrong value. Systems with smaller physical memory sizes more frequently trigger this issue, as the kernel is more likely to allocate from the DMA32 zone where bbl places the DTB after the kernel image.

Commit 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") changed the mapping of the DTB to reside in the fixmap area. Consequently, early_init_fdt_reserve_self() cannot be used anymore in setup_bootmem() since it relies on __pa() to derive a physical address, which does not work with dtb_early_va that is no longer a valid kernel logical address.

The reserved[0x1] region shows the effect of the pointer underflow resulting from the __pa(initial_boot_params) offset subtraction:

[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514
[    0.000000]  memory.cnt  = 0x1
[    0.000000]  memory[0x0]     [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0
[    0.000000]  reserved.cnt  = 0x2
[    0.000000]  reserved[0x0]   [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0
[    0.000000]  reserved[0x1]   [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0

With the fix applied:

[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514
[    0.000000]  memory.cnt  = 0x1
[    0.000000]  memory[0x0]     [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0
[    0.000000]  reserved.cnt  = 0x2
[    0.000000]  reserved[0x0]   [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0
[    0.000000]  reserved[0x1]   [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0
Fixes 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages")
---
 arch/riscv/mm/init.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
arch/riscv/mm/init.c +11 -1
index 42bf939693d34..ed9cd9944d4f9 100644
@@ -11,6 +11,7 @@
 #include <linux/swap.h>
 #include <linux/sizes.h>
 #include <linux/of_fdt.h>
+#include <linux/libfdt.h>
 
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
@@ -82,6 +83,8 @@ static void __init setup_initrd(void)
 }
 #endif /* CONFIG_BLK_DEV_INITRD */
 
+static phys_addr_t dtb_early_pa __initdata;
+
 void __init setup_bootmem(void)
 {
 	struct memblock_region *reg;
@@ -117,7 +120,12 @@ void __init setup_bootmem(void)
 	setup_initrd();
 #endif /* CONFIG_BLK_DEV_INITRD */
 
-	early_init_fdt_reserve_self();
+	/*
+	 * Avoid using early_init_fdt_reserve_self() since __pa() does
+	 * not work for DTB pointers that are fixmap addresses
+	 */
+	memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
+
 	early_init_fdt_scan_reserved_mem();
 	memblock_allow_resize();
 	memblock_dump_all();
@@ -393,6 +401,8 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 
 	/* Save pointer to DTB for early FDT parsing */
 	dtb_early_va = (void *)fix_to_virt(FIX_FDT) + (dtb_pa & ~PAGE_MASK);
+	/* Save physical address for memblock reservation */
+	dtb_early_pa = dtb_pa;
 }
 
 static void __init setup_vm_final(void)
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 45/197 drm/amdgpu: fix multiple memory leaks in acp_hw_init

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

[ Upstream commit 57be09c6e8747bf48704136d9e3f92bfb93f5725 ]

In acp_hw_init there are some allocations that needs to be released in case of failure:

1- adev->acp.acp_genpd should be released if any allocation attemp for adev->acp.acp_cell, adev->acp.acp_res or i2s_pdata fails. 2- all of those allocations should be released if mfd_add_hotplug_devices or pm_genpd_add_device fail.
3- Release is needed in case of time out values expire.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 34 ++++++++++++++++---------
 1 file changed, 22 insertions(+), 12 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +22 -12
index eba42c752bca3..82155ac3288a0 100644
@@ -189,7 +189,7 @@ static int acp_hw_init(void *handle)
 	u32 val = 0;
 	u32 count = 0;
 	struct device *dev;
-	struct i2s_platform_data *i2s_pdata;
+	struct i2s_platform_data *i2s_pdata = NULL;
 
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
@@ -231,20 +231,21 @@ static int acp_hw_init(void *handle)
 	adev->acp.acp_cell = kcalloc(ACP_DEVS, sizeof(struct mfd_cell),
 							GFP_KERNEL);
 
-	if (adev->acp.acp_cell == NULL)
-		return -ENOMEM;
+	if (adev->acp.acp_cell == NULL) {
+		r = -ENOMEM;
+		goto failure;
+	}
 
 	adev->acp.acp_res = kcalloc(5, sizeof(struct resource), GFP_KERNEL);
 	if (adev->acp.acp_res == NULL) {
-		kfree(adev->acp.acp_cell);
-		return -ENOMEM;
+		r = -ENOMEM;
+		goto failure;
 	}
 
 	i2s_pdata = kcalloc(3, sizeof(struct i2s_platform_data), GFP_KERNEL);
 	if (i2s_pdata == NULL) {
-		kfree(adev->acp.acp_res);
-		kfree(adev->acp.acp_cell);
-		return -ENOMEM;
+		r = -ENOMEM;
+		goto failure;
 	}
 
 	switch (adev->asic_type) {
@@ -341,14 +342,14 @@ static int acp_hw_init(void *handle)
 	r = mfd_add_hotplug_devices(adev->acp.parent, adev->acp.acp_cell,
 								ACP_DEVS);
 	if (r)
-		return r;
+		goto failure;
 
 	for (i = 0; i < ACP_DEVS ; i++) {
 		dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i);
 		r = pm_genpd_add_device(&adev->acp.acp_genpd->gpd, dev);
 		if (r) {
 			dev_err(dev, "Failed to add dev to genpd\n");
-			return r;
+			goto failure;
 		}
 	}
 
@@ -367,7 +368,8 @@ static int acp_hw_init(void *handle)
 			break;
 		if (--count == 0) {
 			dev_err(&adev->pdev->dev, "Failed to reset ACP\n");
-			return -ETIMEDOUT;
+			r = -ETIMEDOUT;
+			goto failure;
 		}
 		udelay(100);
 	}
@@ -384,7 +386,8 @@ static int acp_hw_init(void *handle)
 			break;
 		if (--count == 0) {
 			dev_err(&adev->pdev->dev, "Failed to reset ACP\n");
-			return -ETIMEDOUT;
+			r = -ETIMEDOUT;
+			goto failure;
 		}
 		udelay(100);
 	}
@@ -393,6 +396,13 @@ static int acp_hw_init(void *handle)
 	val &= ~ACP_SOFT_RESET__SoftResetAud_MASK;
 	cgs_write_register(adev->acp.cgs_device, mmACP_SOFT_RESET, val);
 	return 0;
+
+failure:
+	kfree(i2s_pdata);
+	kfree(adev->acp.acp_res);
+	kfree(adev->acp.acp_cell);
+	kfree(adev->acp.acp_genpd);
+	return r;
 }
 
 /**
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/197 drm/amd/display: memory leak

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

[ Upstream commit 055e547478a11a6360c7ce05e2afc3e366968a12 ]

In dcn*_clock_source_create when dcn20_clk_src_construct fails allocated clk_src needs release.

---
 drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c | 1 +
 drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c | 1 +
 drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c | 1 +
 drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c | 1 +
 drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c   | 1 +
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c   | 1 +
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c   | 1 +
 7 files changed, 7 insertions(+)
drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c +1 -0
index 6248c84553140..45f74219e79ed 100644
@@ -668,6 +668,7 @@ struct clock_source *dce100_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c +1 -0
index 764329264c3b4..0cb83b0e0e1ee 100644
@@ -714,6 +714,7 @@ struct clock_source *dce110_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c +1 -0
index 7a04be74c9cf9..918455caa9a61 100644
@@ -687,6 +687,7 @@ struct clock_source *dce112_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c +1 -0
index ae38c9c7277cf..49f3f0fad7633 100644
@@ -500,6 +500,7 @@ static struct clock_source *dce120_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c +1 -0
index 860a524ebcfab..952440893fbb3 100644
@@ -701,6 +701,7 @@ struct clock_source *dce80_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c +1 -0
index a12530a3ab9ca..3f25e8da5396a 100644
@@ -786,6 +786,7 @@ struct clock_source *dcn10_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +1 -0
index b949e202d6cb7..5b7ff6c549f18 100644
@@ -955,6 +955,7 @@ struct clock_source *dcn20_clock_source_create(
 		return &clk_src->base;
 	}
 
+	kfree(clk_src);
 	BREAK_TO_DEBUGGER();
 	return NULL;
 }
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/197 mips: Loongson: Fix the link time qualifier of serial_exit()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 25b69a889b638b0b7e51e2c4fe717a66bec0e566 ]

'exit' functions should be marked as __exit, not __init.

---
 arch/mips/loongson64/common/serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/loongson64/common/serial.c +1 -1
index ffefc1cb26121..98c3a7feb10f8 100644
@@ -110,7 +110,7 @@ static int __init serial_init(void)
 }
 module_init(serial_init);
 
-static void __init serial_exit(void)
+static void __exit serial_exit(void)
 {
 	platform_device_unregister(&uart8250_device);
 }
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/197 net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write()

In reply to Greg Kroah-Hartman

From: Yizhuo <[email protected]>

[ Upstream commit 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 ]

In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe.

---
 drivers/net/ethernet/hisilicon/hns_mdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/hisilicon/hns_mdio.c +5 -1
index 3e863a71c5136..7df5d7d211d47 100644
@@ -148,11 +148,15 @@ static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev,
 {
 	u32 time_cnt;
 	u32 reg_value;
+	int ret;
 
 	regmap_write(mdio_dev->subctrl_vbase, cfg_reg, set_val);
 
 	for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) {
-		regmap_read(mdio_dev->subctrl_vbase, st_reg, &reg_value);
+		ret = regmap_read(mdio_dev->subctrl_vbase, st_reg, &reg_value);
+		if (ret)
+			return ret;
+
 		reg_value &= st_msk;
 		if ((!!check_st) == (!!reg_value))
 			break;
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/197 net: stmmac: Avoid deadlock on suspend/resume

In reply to Greg Kroah-Hartman

From: Thierry Reding <[email protected]>

[ Upstream commit 134cc4cefad34d8d24670d8a911b59c3b89c6731 ]

The stmmac driver will try to acquire its private mutex during suspend via phylink_resolve() -> stmmac_mac_link_down() -> stmmac_eee_init(). However, the phylink configuration is updated with the private mutex held already, which causes a deadlock during suspend.

Fix this by moving the phylink configuration updates out of the region of code protected by the private mutex.

Fixes 19e13cb27b99 ("net: stmmac: Hold rtnl lock in suspend/resume callbacks")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +6 -4
index 69cc9133336fc..8d5ec73e02d34 100644
@@ -4454,10 +4454,10 @@ int stmmac_suspend(struct device *dev)
 	if (!ndev || !netif_running(ndev))
 		return 0;
 
-	mutex_lock(&priv->lock);
-
 	phylink_mac_change(priv->phylink, false);
 
+	mutex_lock(&priv->lock);
+
 	netif_device_detach(ndev);
 	stmmac_stop_all_queues(priv);
 
@@ -4471,9 +4471,11 @@ int stmmac_suspend(struct device *dev)
 		stmmac_pmt(priv, priv->hw, priv->wolopts);
 		priv->irq_wake = 1;
 	} else {
+		mutex_unlock(&priv->lock);
 		rtnl_lock();
 		phylink_stop(priv->phylink);
 		rtnl_unlock();
+		mutex_lock(&priv->lock);
 
 		stmmac_mac_set(priv, priv->ioaddr, false);
 		pinctrl_pm_select_sleep_state(priv->device);
@@ -4565,6 +4567,8 @@ int stmmac_resume(struct device *dev)
 
 	stmmac_start_all_queues(priv);
 
+	mutex_unlock(&priv->lock);
+
 	if (!device_may_wakeup(priv->device)) {
 		rtnl_lock();
 		phylink_start(priv->phylink);
@@ -4573,8 +4577,6 @@ int stmmac_resume(struct device *dev)
 
 	phylink_mac_change(priv->phylink, true);
 
-	mutex_unlock(&priv->lock);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(stmmac_resume);
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/197 selftests: kvm: Fix libkvm build error

In reply to Greg Kroah-Hartman

From: Shuah Khan <[email protected]>

[ Upstream commit 6e06983dde969c15eb4fdab77f0eda8b18ea28e6 ]

Fix the following build error from "make TARGETS=kvm kselftest":

libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC

This error is seen when build is done from the main Makefile using kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS are defined.

When build is invoked using:

"make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS aren't defined.

There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the check to determine if --no-pie is necessary, which is the case when these two aren't defined when "make -C tools/testing/selftests/kvm" runs.

Fix it by simplifying the no-pie-option logic. With this change, both build variations work.

"make TARGETS=kvm kselftest"
"make -C tools/testing/selftests/kvm"

---
 tools/testing/selftests/kvm/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/kvm/Makefile +1 -1
index ba78497519894..fc8aeb224c032 100644
@@ -46,7 +46,7 @@ CFLAGS += -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 \
 	-I$(LINUX_HDR_PATH) -Iinclude -I$(<D) -Iinclude/$(UNAME_M) -I..
 
 no-pie-option := $(call try-run, echo 'int main() { return 0; }' | \
-        $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -no-pie -x c - -o "$$TMP", -no-pie)
+        $(CC) -Werror -no-pie -x c - -o "$$TMP", -no-pie)
 
 # On s390, build the testcases KVM-enabled
 pgste-option = $(call try-run, echo 'int main() { return 0; }' | \
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/197 lib: textsearch: fix escapes in example code

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 2105b52e30debe7f19f3218598d8ae777dcc6776 ]

This textsearch code example does not need the '\' escapes and they can be misleading to someone reading the example. Also, gcc and sparse warn that the "\%d" is an unknown escape sequence.

Fixes 5968a70d7af5 ("textsearch: fix kernel-doc warnings and add kernel-api section")
Cc "David S. Miller" <[email protected]>
---
 lib/textsearch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
lib/textsearch.c +2 -2
index 4f16eec5d5544..f68dea8806be2 100644
@@ -89,9 +89,9 @@
  *       goto errout;
  *   }
  *
- *   pos = textsearch_find_continuous(conf, \&state, example, strlen(example));
+ *   pos = textsearch_find_continuous(conf, &state, example, strlen(example));
  *   if (pos != UINT_MAX)
- *       panic("Oh my god, dancing chickens at \%d\n", pos);
+ *       panic("Oh my god, dancing chickens at %d\n", pos);
  *
  *   textsearch_destroy(conf);
  */
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/197 s390/mm: fix -Wunused-but-set-variable warnings

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit 51ce02216d4ad4e8f6a58de81d6e803cf04c418e ]

Convert two functions to static inline to get ride of W=1 GCC warnings like,

mm/gup.c: In function 'gup_pte_range':
mm/gup.c:1816:16: warning: variable 'ptem' set but not used [-Wunused-but-set-variable]

  pte_t *ptep, *ptem;
                ^~~~

mm/mmap.c: In function 'acct_stack_growth':
mm/mmap.c:2322:16: warning: variable 'new_start' set but not used [-Wunused-but-set-variable]

  unsigned long new_start;
                ^~~~~~~~~
---
 arch/s390/include/asm/hugetlb.h | 9 +++++++--
 arch/s390/include/asm/pgtable.h | 3 ++-
 2 files changed, 9 insertions(+), 3 deletions(-)
arch/s390/include/asm/hugetlb.h +7 -2
index bb59dd9645909..de8f0bf5f238c 100644
@@ -12,8 +12,6 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 
-
-#define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range			free_pgd_range
 #define hugepages_supported()			(MACHINE_HAS_EDAT1)
 
@@ -23,6 +21,13 @@ pte_t huge_ptep_get(pte_t *ptep);
 pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 			      unsigned long addr, pte_t *ptep);
 
+static inline bool is_hugepage_only_range(struct mm_struct *mm,
+					  unsigned long addr,
+					  unsigned long len)
+{
+	return false;
+}
+
 /*
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
arch/s390/include/asm/pgtable.h +2 -1
index 9b274fcaacb68..70ac23e50cae9 100644
@@ -1268,7 +1268,8 @@ static inline pte_t *pte_offset(pmd_t *pmd, unsigned long address)
 
 #define pte_offset_kernel(pmd, address) pte_offset(pmd, address)
 #define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
-#define pte_unmap(pte) do { } while (0)
+
+static inline void pte_unmap(pte_t *pte) { }
 
 static inline bool gup_fast_permitted(unsigned long start, unsigned long end)
 {
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 53/197 r8152: Set macpassthru in reset_resume callback

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit a54cdeeb04fc719e4c7f19d6e28dba7ea86cee5b ]

r8152 may fail to establish network connection after resume from system suspend.

If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume.

---
 drivers/net/usb/r8152.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/usb/r8152.c +1 -2
index 04137ac373b07..9eedc0714422c 100644
@@ -4533,10 +4533,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	struct r8152 *tp = usb_get_intfdata(intf);
 
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
-	mutex_lock(&tp->control);
 	tp->rtl_ops.init(tp);
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
-	mutex_unlock(&tp->control);
+	set_ethernet_addr(tp);
 	return rtl8152_resume(intf);
 }
 
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 54/197 net: phy: allow for reset line to be tied to a sleepy GPIO controller

In reply to Greg Kroah-Hartman

From: Andrea Merello <[email protected]>

[ Upstream commit ea977d19d918324ad5b66953f051a6ed07d0a3c5 ]

mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line.

I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there.

This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller.

This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree.

---
 drivers/net/phy/mdio_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/mdio_device.c +1 -1
index e282600bd83e2..c1d345c3cab35 100644
@@ -121,7 +121,7 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
 		return;
 
 	if (mdiodev->reset_gpio)
-		gpiod_set_value(mdiodev->reset_gpio, value);
+		gpiod_set_value_cansleep(mdiodev->reset_gpio, value);
 
 	if (mdiodev->reset_ctrl) {
 		if (value)
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/197 net: phy: fix write to mii-ctrl1000 register

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 4cf6c57e61fee954f7b7685de31b80ec26843d27 ]

When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution.

Fixes 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
---
 drivers/net/phy/phy.c | 5 +++++
 include/linux/mii.h   | 9 +++++++++
 2 files changed, 14 insertions(+)
drivers/net/phy/phy.c +5 -0
index 6b0f89369b460..0a314cf454080 100644
@@ -457,6 +457,11 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 							   val);
 				change_autoneg = true;
 				break;
+			case MII_CTRL1000:
+				mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising,
+							        val);
+				change_autoneg = true;
+				break;
 			default:
 				/* do nothing */
 				break;
include/linux/mii.h +9 -0
index 5cd824c1c0caa..4ce8901a1af65 100644
@@ -455,6 +455,15 @@ static inline void mii_lpa_mod_linkmode_lpa_t(unsigned long *lp_advertising,
 			 lp_advertising, lpa & LPA_LPACK);
 }
 
+static inline void mii_ctrl1000_mod_linkmode_adv_t(unsigned long *advertising,
+						   u32 ctrl1000)
+{
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertising,
+			 ctrl1000 & ADVERTISE_1000HALF);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertising,
+			 ctrl1000 & ADVERTISE_1000FULL);
+}
+
 /**
  * linkmode_adv_to_lcl_adv_t
  * @advertising:pointer to linkmode advertising
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 56/197 namespace: fix namespace.pl script to support relative paths

In reply to Greg Kroah-Hartman

From: Jacob Keller <[email protected]>

[ Upstream commit 82fdd12b95727640c9a8233c09d602e4518e71f7 ]

The namespace.pl script does not work properly if objtree is not set to an absolute path. The do_nm function is run from within the find function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using "make namespacecheck". It appears to have not worked when calling ./scripts/namespace.pl directly.

This behavior was changed in 7e1c04779efd ("kbuild: Use relative path for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just fix namespace.pl to work when srctree and objtree are relative. Also fix the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl 5 since 5.005.

The curdir() function is used to get the current directory when the objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending paths together, since this is more robust when joining paths together.

---
 scripts/namespace.pl | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
scripts/namespace.pl +7 -6
index 6135574a6f394..1da7bca201a42 100755
@@ -65,13 +65,14 @@
 use warnings;
 use strict;
 use File::Find;
+use File::Spec;
 
 my $nm = ($ENV{'NM'} || "nm") . " -p";
 my $objdump = ($ENV{'OBJDUMP'} || "objdump") . " -s -j .comment";
-my $srctree = "";
-my $objtree = "";
-$srctree = "$ENV{'srctree'}/" if (exists($ENV{'srctree'}));
-$objtree = "$ENV{'objtree'}/" if (exists($ENV{'objtree'}));
+my $srctree = File::Spec->curdir();
+my $objtree = File::Spec->curdir();
+$srctree = File::Spec->rel2abs($ENV{'srctree'}) if (exists($ENV{'srctree'}));
+$objtree = File::Spec->rel2abs($ENV{'objtree'}) if (exists($ENV{'objtree'}));
 
 if ($#ARGV != -1) {
 	print STDERR "usage: $0 takes no parameters\n";
@@ -231,9 +232,9 @@ sub do_nm
 	}
 	($source = $basename) =~ s/\.o$//;
 	if (-e "$source.c" || -e "$source.S") {
-		$source = "$objtree$File::Find::dir/$source";
+		$source = File::Spec->catfile($objtree, $File::Find::dir, $source)
 	} else {
-		$source = "$srctree$File::Find::dir/$source";
+		$source = File::Spec->catfile($srctree, $File::Find::dir, $source)
 	}
 	if (! -e "$source.c" && ! -e "$source.S") {
 		# No obvious source, exclude the object if it is conglomerate
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 57/197 Convert filldir[64]() from __put_user() to unsafe_put_user()

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit 9f79b78ef74436c7507bac6bfb7b8b989263bccb ]

We really should avoid the "__{get,put}_user()" functions entirely, because they can easily be mis-used and the original intent of being used for simple direct user accesses no longer holds in a post-SMAP/PAN world.

Manually optimizing away the user access range check makes no sense any more, when the range check is generally much cheaper than the "enable user accesses" code that the __{get,put}_user() functions still need.

So instead of __put_user(), use the unsafe_put_user() interface with user_access_{begin,end}() that really does generate better code these days, and which is generally a nicer interface. Under some loads, the multiple user writes that filldir() does are actually quite noticeable.

This also makes the dirent name copy use unsafe_put_user() with a couple of macros. We do not want to make function calls with SMAP/PAN disabled, and the code this generates is quite good when the architecture uses "asm goto" for unsafe_put_user() like x86 does.

Note that this doesn't bother with the legacy cases. Nobody should use them anyway, so performance doesn't really matter there.

---
 fs/readdir.c | 128 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 93 insertions(+), 35 deletions(-)
fs/readdir.c +93 -35
index 2f6a4534e0dfe..579c8ea894ae3 100644
@@ -20,9 +20,63 @@
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
 #include <linux/compat.h>
-
 #include <linux/uaccess.h>
 
+#include <asm/unaligned.h>
+
+/*
+ * Note the "unsafe_put_user() semantics: we goto a
+ * label for errors.
+ *
+ * Also note how we use a "while()" loop here, even though
+ * only the biggest size needs to loop. The compiler (well,
+ * at least gcc) is smart enough to turn the smaller sizes
+ * into just if-statements, and this way we don't need to
+ * care whether 'u64' or 'u32' is the biggest size.
+ */
+#define unsafe_copy_loop(dst, src, len, type, label) 		\
+	while (len >= sizeof(type)) {				\
+		unsafe_put_user(get_unaligned((type *)src),	\
+			(type __user *)dst, label);		\
+		dst += sizeof(type);				\
+		src += sizeof(type);				\
+		len -= sizeof(type);				\
+	}
+
+/*
+ * We avoid doing 64-bit copies on 32-bit architectures. They
+ * might be better, but the component names are mostly small,
+ * and the 64-bit cases can end up being much more complex and
+ * put much more register pressure on the code, so it's likely
+ * not worth the pain of unaligned accesses etc.
+ *
+ * So limit the copies to "unsigned long" size. I did verify
+ * that at least the x86-32 case is ok without this limiting,
+ * but I worry about random other legacy 32-bit cases that
+ * might not do as well.
+ */
+#define unsafe_copy_type(dst, src, len, type, label) do {	\
+	if (sizeof(type) <= sizeof(unsigned long))		\
+		unsafe_copy_loop(dst, src, len, type, label);	\
+} while (0)
+
+/*
+ * Copy the dirent name to user space, and NUL-terminate
+ * it. This should not be a function call, since we're doing
+ * the copy inside a "user_access_begin/end()" section.
+ */
+#define unsafe_copy_dirent_name(_dst, _src, _len, label) do {	\
+	char __user *dst = (_dst);				\
+	const char *src = (_src);				\
+	size_t len = (_len);					\
+	unsafe_copy_type(dst, src, len, u64, label);	 	\
+	unsafe_copy_type(dst, src, len, u32, label);		\
+	unsafe_copy_type(dst, src, len, u16, label);		\
+	unsafe_copy_type(dst, src, len, u8,  label);		\
+	unsafe_put_user(0, dst, label);				\
+} while (0)
+
+
 int iterate_dir(struct file *file, struct dir_context *ctx)
 {
 	struct inode *inode = file_inode(file);
@@ -182,28 +236,31 @@ static int filldir(struct dir_context *ctx, const char *name, int namlen,
 		return -EOVERFLOW;
 	}
 	dirent = buf->previous;
-	if (dirent) {
-		if (signal_pending(current))
-			return -EINTR;
-		if (__put_user(offset, &dirent->d_off))
-			goto efault;
-	}
-	dirent = buf->current_dir;
-	if (__put_user(d_ino, &dirent->d_ino))
-		goto efault;
-	if (__put_user(reclen, &dirent->d_reclen))
-		goto efault;
-	if (copy_to_user(dirent->d_name, name, namlen))
-		goto efault;
-	if (__put_user(0, dirent->d_name + namlen))
-		goto efault;
-	if (__put_user(d_type, (char __user *) dirent + reclen - 1))
+	if (dirent && signal_pending(current))
+		return -EINTR;
+
+	/*
+	 * Note! This range-checks 'previous' (which may be NULL).
+	 * The real range was checked in getdents
+	 */
+	if (!user_access_begin(dirent, sizeof(*dirent)))
 		goto efault;
+	if (dirent)
+		unsafe_put_user(offset, &dirent->d_off, efault_end);
+	dirent = buf->current_dir;
+	unsafe_put_user(d_ino, &dirent->d_ino, efault_end);
+	unsafe_put_user(reclen, &dirent->d_reclen, efault_end);
+	unsafe_put_user(d_type, (char __user *) dirent + reclen - 1, efault_end);
+	unsafe_copy_dirent_name(dirent->d_name, name, namlen, efault_end);
+	user_access_end();
+
 	buf->previous = dirent;
 	dirent = (void __user *)dirent + reclen;
 	buf->current_dir = dirent;
 	buf->count -= reclen;
 	return 0;
+efault_end:
+	user_access_end();
 efault:
 	buf->error = -EFAULT;
 	return -EFAULT;
@@ -263,30 +320,31 @@ static int filldir64(struct dir_context *ctx, const char *name, int namlen,
 	if (reclen > buf->count)
 		return -EINVAL;
 	dirent = buf->previous;
-	if (dirent) {
-		if (signal_pending(current))
-			return -EINTR;
-		if (__put_user(offset, &dirent->d_off))
-			goto efault;
-	}
-	dirent = buf->current_dir;
-	if (__put_user(ino, &dirent->d_ino))
-		goto efault;
-	if (__put_user(0, &dirent->d_off))
-		goto efault;
-	if (__put_user(reclen, &dirent->d_reclen))
-		goto efault;
-	if (__put_user(d_type, &dirent->d_type))
-		goto efault;
-	if (copy_to_user(dirent->d_name, name, namlen))
-		goto efault;
-	if (__put_user(0, dirent->d_name + namlen))
+	if (dirent && signal_pending(current))
+		return -EINTR;
+
+	/*
+	 * Note! This range-checks 'previous' (which may be NULL).
+	 * The real range was checked in getdents
+	 */
+	if (!user_access_begin(dirent, sizeof(*dirent)))
 		goto efault;
+	if (dirent)
+		unsafe_put_user(offset, &dirent->d_off, efault_end);
+	dirent = buf->current_dir;
+	unsafe_put_user(ino, &dirent->d_ino, efault_end);
+	unsafe_put_user(reclen, &dirent->d_reclen, efault_end);
+	unsafe_put_user(d_type, &dirent->d_type, efault_end);
+	unsafe_copy_dirent_name(dirent->d_name, name, namlen, efault_end);
+	user_access_end();
+
 	buf->previous = dirent;
 	dirent = (void __user *)dirent + reclen;
 	buf->current_dir = dirent;
 	buf->count -= reclen;
 	return 0;
+efault_end:
+	user_access_end();
 efault:
 	buf->error = -EFAULT;
 	return -EFAULT;
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 58/197 elf: dont use MAP_FIXED_NOREPLACE for elf executable mappings

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit b212921b13bda088a004328457c5c21458262fe2 ]

In commit 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") we changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the executable mappings.

Then, people reported that it broke some binaries that had overlapping segments from the same file, and commit ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some overlaying elf segment cases. But only some - despite the summary line of that commit, it only did it when it also does a temporary brk vma for one obvious overlapping case.

Now Russell King reports another overlapping case with old 32-bit x86 binaries, which doesn't trigger that limited case. End result: we had better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.

Yes, it's a sign of old binaries generated with old tool-chains, but we do pride ourselves on not breaking existing setups.

This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp() and the old load_elf_library() use-cases, because nobody has reported breakage for those. Yet.

Note that in all the cases seen so far, the overlapping elf sections seem to be just re-mapping of the same executable with different section attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE flag or similar, which acts like NOREPLACE, but allows just remapping the same executable file using different protection flags.

It's not clear that would make a huge difference to anything, but if people really hate that "elf remaps over previous maps" behavior, maybe at least a more limited form of remapping would alleviate some concerns.

Alternatively, we should take a look at our elf_map() logic to see if we end up not mapping things properly the first time.

In the meantime, this is the minimal "don't do that then" patch while people hopefully think about it more.

Fixes 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments")
Cc Michal Hocko <[email protected]>
Cc Kees Cook <[email protected]>
---
 fs/binfmt_elf.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
fs/binfmt_elf.c +3 -10
index f131651502b8a..c62903290f3a5 100644
@@ -899,7 +899,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 	   the correct location in memory. */
 	for(i = 0, elf_ppnt = elf_phdata;
 	    i < loc->elf_ex.e_phnum; i++, elf_ppnt++) {
-		int elf_prot, elf_flags, elf_fixed = MAP_FIXED_NOREPLACE;
+		int elf_prot, elf_flags;
 		unsigned long k, vaddr;
 		unsigned long total_size = 0;
 
@@ -931,13 +931,6 @@ static int load_elf_binary(struct linux_binprm *bprm)
 					 */
 				}
 			}
-
-			/*
-			 * Some binaries have overlapping elf segments and then
-			 * we have to forcefully map over an existing mapping
-			 * e.g. over this newly established brk mapping.
-			 */
-			elf_fixed = MAP_FIXED;
 		}
 
 		elf_prot = make_prot(elf_ppnt->p_flags);
@@ -950,7 +943,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 		 * the ET_DYN load_addr calculations, proceed normally.
 		 */
 		if (loc->elf_ex.e_type == ET_EXEC || load_addr_set) {
-			elf_flags |= elf_fixed;
+			elf_flags |= MAP_FIXED;
 		} else if (loc->elf_ex.e_type == ET_DYN) {
 			/*
 			 * This logic is run once for the first LOAD Program
@@ -986,7 +979,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
 				load_bias = ELF_ET_DYN_BASE;
 				if (current->flags & PF_RANDOMIZE)
 					load_bias += arch_mmap_rnd();
-				elf_flags |= elf_fixed;
+				elf_flags |= MAP_FIXED;
 			} else
 				load_bias = 0;
 
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 59/197 Make filldir[64]() verify the directory entry filename is valid

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit 8a23eb804ca4f2be909e372cf5a9e7b30ae476cd ]

This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context:

"From readdir:

The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry.

From definitions:

3.129 Directory Entry (or Link)

An object that associates a filename with a file. Several directory entries can associate names with the same file.

...

3.169 Filename

A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces that nobody uses.

Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel.

---
 fs/readdir.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
fs/readdir.c +40 -0
index 579c8ea894ae3..19bea591c3f1d 100644
@@ -118,6 +118,40 @@ out:
 }
 EXPORT_SYMBOL(iterate_dir);
 
+/*
+ * POSIX says that a dirent name cannot contain NULL or a '/'.
+ *
+ * It's not 100% clear what we should really do in this case.
+ * The filesystem is clearly corrupted, but returning a hard
+ * error means that you now don't see any of the other names
+ * either, so that isn't a perfect alternative.
+ *
+ * And if you return an error, what error do you use? Several
+ * filesystems seem to have decided on EUCLEAN being the error
+ * code for EFSCORRUPTED, and that may be the error to use. Or
+ * just EIO, which is perhaps more obvious to users.
+ *
+ * In order to see the other file names in the directory, the
+ * caller might want to make this a "soft" error: skip the
+ * entry, and return the error at the end instead.
+ *
+ * Note that this should likely do a "memchr(name, 0, len)"
+ * check too, since that would be filesystem corruption as
+ * well. However, that case can't actually confuse user space,
+ * which has to do a strlen() on the name anyway to find the
+ * filename length, and the above "soft error" worry means
+ * that it's probably better left alone until we have that
+ * issue clarified.
+ */
+static int verify_dirent_name(const char *name, int len)
+{
+	if (WARN_ON_ONCE(!len))
+		return -EIO;
+	if (WARN_ON_ONCE(memchr(name, '/', len)))
+		return -EIO;
+	return 0;
+}
+
 /*
  * Traditional linux readdir() handling..
  *
@@ -227,6 +261,9 @@ static int filldir(struct dir_context *ctx, const char *name, int namlen,
 	int reclen = ALIGN(offsetof(struct linux_dirent, d_name) + namlen + 2,
 		sizeof(long));
 
+	buf->error = verify_dirent_name(name, namlen);
+	if (unlikely(buf->error))
+		return buf->error;
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
 		return -EINVAL;
@@ -316,6 +353,9 @@ static int filldir64(struct dir_context *ctx, const char *name, int namlen,
 	int reclen = ALIGN(offsetof(struct linux_dirent64, d_name) + namlen + 1,
 		sizeof(u64));
 
+	buf->error = verify_dirent_name(name, namlen);
+	if (unlikely(buf->error))
+		return buf->error;
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
 		return -EINVAL;
Signature · 1 line
2.20.1
author maintainer
#60 lore raw

PATCH 60/197 uaccess: implement a proper unsafe_copy_to_user() and switch filldir over to it

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit c512c69187197fe08026cb5bbe7b9709f4f89b73 ]

In commit 9f79b78ef744 ("Convert filldir[64]() from __put_user() to unsafe_put_user()") I made filldir() use unsafe_put_user(), which improves code generation on x86 enormously.

But because we didn't have a "unsafe_copy_to_user()", the dirent name copy was also done by hand with unsafe_put_user() in a loop, and it turns out that a lot of other architectures didn't like that, because unlike x86, they have various alignment issues.

Most non-x86 architectures trap and fix it up, and some (like xtensa) will just fail unaligned put_user() accesses unconditionally. Which makes that "copy using put_user() in a loop" not work for them at all.

I could make that code do explicit alignment etc, but the architectures that don't like unaligned accesses also don't really use the fancy "user_access_begin/end()" model, so they might just use the regular old __copy_to_user() interface.

So this commit takes that looping implementation, turns it into the x86 version of "unsafe_copy_to_user()", and makes other architectures implement the unsafe copy version as __copy_to_user() (the same way they do for the other unsafe_xyz() accessor functions).

Note that it only does this for the copying _to_ user space, and we still don't have a unsafe version of copy_from_user().

That's partly because we have no current users of it, but also partly because the copy_from_user() case is slightly different and cannot efficiently be implemented in terms of a unsafe_get_user() loop (because gcc can't do asm goto with outputs).

It would be trivial to do this using "rep movsb", which would work really nicely on newer x86 cores, but really badly on some older ones.

Al Viro is looking at cleaning up all our user copy routines to make this all a non-issue, but for now we have this simple-but-stupid version for x86 that works fine for the dirent name copy case because those names are short strings and we simply don't need anything fancier.

Fixes 9f79b78ef744 ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Reported-and-tested-by Tony Luck <[email protected]>
Cc Al Viro <[email protected]>
Cc Max Filippov <[email protected]>
---
 arch/x86/include/asm/uaccess.h | 23 ++++++++++++++++++
 fs/readdir.c                   | 44 ++--------------------------------
 include/linux/uaccess.h        |  6 +++--
 3 files changed, 29 insertions(+), 44 deletions(-)
arch/x86/include/asm/uaccess.h +23 -0
index 35c225ede0e4f..61d93f062a36e 100644
@@ -734,5 +734,28 @@ do {										\
 	if (unlikely(__gu_err)) goto err_label;					\
 } while (0)
 
+/*
+ * We want the unsafe accessors to always be inlined and use
+ * the error labels - thus the macro games.
+ */
+#define unsafe_copy_loop(dst, src, len, type, label)			\
+	while (len >= sizeof(type)) {					\
+		unsafe_put_user(*(type *)src,(type __user *)dst,label);	\
+		dst += sizeof(type);					\
+		src += sizeof(type);					\
+		len -= sizeof(type);					\
+	}
+
+#define unsafe_copy_to_user(_dst,_src,_len,label)			\
+do {									\
+	char __user *__ucu_dst = (_dst);				\
+	const char *__ucu_src = (_src);					\
+	size_t __ucu_len = (_len);					\
+	unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u64, label);	\
+	unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u32, label);	\
+	unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u16, label);	\
+	unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u8, label);	\
+} while (0)
+
 #endif /* _ASM_X86_UACCESS_H */
 
fs/readdir.c +2 -42

55 lines not on this page · raw message

include/linux/uaccess.h +4 -2
index 34a038563d979..d38051dd414fd 100644
@@ -284,8 +284,10 @@ extern long strnlen_unsafe_user(const void __user *unsafe_addr, long count);
 #ifndef user_access_begin
 #define user_access_begin(ptr,len) access_ok(ptr, len)
 #define user_access_end() do { } while (0)
-#define unsafe_get_user(x, ptr, err) do { if (unlikely(__get_user(x, ptr))) goto err; } while (0)
-#define unsafe_put_user(x, ptr, err) do { if (unlikely(__put_user(x, ptr))) goto err; } while (0)
+#define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0)
+#define unsafe_get_user(x,p,e) unsafe_op_wrap(__get_user(x,p),e)
+#define unsafe_put_user(x,p,e) unsafe_op_wrap(__put_user(x,p),e)
+#define unsafe_copy_to_user(d,s,l,e) unsafe_op_wrap(__copy_to_user(d,s,l),e)
 static inline unsigned long user_access_save(void) { return 0UL; }
 static inline void user_access_restore(unsigned long flags) { }
 #endif
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 61/197 filldir[64]: remove WARN_ON_ONCE() for bad directory entries

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit b9959c7a347d6adbb558fba7e36e9fef3cba3b07 ]

This was always meant to be a temporary thing, just for testing and to see if it actually ever triggered.

The only thing that reported it was syzbot doing disk image fuzzing, and then that warning is expected. So let's just remove it before -rc4, because the extra sanity testing should probably go to -stable, but we don't want the warning to do so.

Reported-by [email protected]
Fixes 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")
---
 fs/readdir.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/readdir.c +2 -2
index 6e2623e57b2e8..d26d5ea4de7b8 100644
@@ -105,9 +105,9 @@ EXPORT_SYMBOL(iterate_dir);
  */
 static int verify_dirent_name(const char *name, int len)
 {
-	if (WARN_ON_ONCE(!len))
+	if (!len)
 		return -EIO;
-	if (WARN_ON_ONCE(memchr(name, '/', len)))
+	if (memchr(name, '/', len))
 		return -EIO;
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#62 lore raw

PATCH 62/197 net_sched: fix backward compatibility for TCA_KIND

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit 6f96c3c6904c26cea9ca2726d5d8a9b0b8205b3c ]

Marcelo noticed a backward compatibility issue of TCA_KIND after we move from NLA_STRING to NLA_NUL_STRING, so it is probably too late to change it.

Instead, to make everyone happy, we can just insert a NUL to terminate the string with nla_strlcpy() like we do for TC actions.

Fixes 62794fc4fbf5 ("net_sched: add max len check for TCA_KIND")
Cc Jamal Hadi Salim <[email protected]>
Cc Jiri Pirko <[email protected]>
---
 net/sched/cls_api.c | 36 +++++++++++++++++++++++++++++++++---
 net/sched/sch_api.c |  3 +--
 2 files changed, 34 insertions(+), 5 deletions(-)
net/sched/cls_api.c +33 -3
index 9aef93300f1c1..6b12883e04b8f 100644
@@ -160,11 +160,22 @@ static inline u32 tcf_auto_prio(struct tcf_proto *tp)
 	return TC_H_MAJ(first);
 }
 
+static bool tcf_proto_check_kind(struct nlattr *kind, char *name)
+{
+	if (kind)
+		return nla_strlcpy(name, kind, IFNAMSIZ) >= IFNAMSIZ;
+	memset(name, 0, IFNAMSIZ);
+	return false;
+}
+
 static bool tcf_proto_is_unlocked(const char *kind)
 {
 	const struct tcf_proto_ops *ops;
 	bool ret;
 
+	if (strlen(kind) == 0)
+		return false;
+
 	ops = tcf_proto_lookup_ops(kind, false, NULL);
 	/* On error return false to take rtnl lock. Proto lookup/create
 	 * functions will perform lookup again and properly handle errors.
@@ -1976,6 +1987,7 @@ static int tc_new_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
 {
 	struct net *net = sock_net(skb->sk);
 	struct nlattr *tca[TCA_MAX + 1];
+	char name[IFNAMSIZ];
 	struct tcmsg *t;
 	u32 protocol;
 	u32 prio;
@@ -2032,13 +2044,19 @@ replay:
 	if (err)
 		return err;
 
+	if (tcf_proto_check_kind(tca[TCA_KIND], name)) {
+		NL_SET_ERR_MSG(extack, "Specified TC filter name too long");
+		err = -EINVAL;
+		goto errout;
+	}
+
 	/* Take rtnl mutex if rtnl_held was set to true on previous iteration,
 	 * block is shared (no qdisc found), qdisc is not unlocked, classifier
 	 * type is not specified, classifier is not unlocked.
 	 */
 	if (rtnl_held ||
 	    (q && !(q->ops->cl_ops->flags & QDISC_CLASS_OPS_DOIT_UNLOCKED)) ||
-	    !tca[TCA_KIND] || !tcf_proto_is_unlocked(nla_data(tca[TCA_KIND]))) {
+	    !tcf_proto_is_unlocked(name)) {
 		rtnl_held = true;
 		rtnl_lock();
 	}
@@ -2196,6 +2214,7 @@ static int tc_del_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
 {
 	struct net *net = sock_net(skb->sk);
 	struct nlattr *tca[TCA_MAX + 1];
+	char name[IFNAMSIZ];
 	struct tcmsg *t;
 	u32 protocol;
 	u32 prio;
@@ -2235,13 +2254,18 @@ static int tc_del_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
 	if (err)
 		return err;
 
+	if (tcf_proto_check_kind(tca[TCA_KIND], name)) {
+		NL_SET_ERR_MSG(extack, "Specified TC filter name too long");
+		err = -EINVAL;
+		goto errout;
+	}
 	/* Take rtnl mutex if flushing whole chain, block is shared (no qdisc
 	 * found), qdisc is not unlocked, classifier type is not specified,
 	 * classifier is not unlocked.
 	 */
 	if (!prio ||
 	    (q && !(q->ops->cl_ops->flags & QDISC_CLASS_OPS_DOIT_UNLOCKED)) ||
-	    !tca[TCA_KIND] || !tcf_proto_is_unlocked(nla_data(tca[TCA_KIND]))) {
+	    !tcf_proto_is_unlocked(name)) {
 		rtnl_held = true;
 		rtnl_lock();
 	}
@@ -2349,6 +2373,7 @@ static int tc_get_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
 {
 	struct net *net = sock_net(skb->sk);
 	struct nlattr *tca[TCA_MAX + 1];
+	char name[IFNAMSIZ];
 	struct tcmsg *t;
 	u32 protocol;
 	u32 prio;
@@ -2385,12 +2410,17 @@ static int tc_get_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
 	if (err)
 		return err;
 
+	if (tcf_proto_check_kind(tca[TCA_KIND], name)) {
+		NL_SET_ERR_MSG(extack, "Specified TC filter name too long");
+		err = -EINVAL;
+		goto errout;
+	}
 	/* Take rtnl mutex if block is shared (no qdisc found), qdisc is not
 	 * unlocked, classifier type is not specified, classifier is not
 	 * unlocked.
 	 */
 	if ((q && !(q->ops->cl_ops->flags & QDISC_CLASS_OPS_DOIT_UNLOCKED)) ||
-	    !tca[TCA_KIND] || !tcf_proto_is_unlocked(nla_data(tca[TCA_KIND]))) {
+	    !tcf_proto_is_unlocked(name)) {
 		rtnl_held = true;
 		rtnl_lock();
 	}
net/sched/sch_api.c +1 -2
index 81d58b2806122..1047825d9f48d 100644
@@ -1390,8 +1390,7 @@ check_loop_fn(struct Qdisc *q, unsigned long cl, struct qdisc_walker *w)
 }
 
 const struct nla_policy rtm_tca_policy[TCA_MAX + 1] = {
-	[TCA_KIND]		= { .type = NLA_NUL_STRING,
-				    .len = IFNAMSIZ - 1 },
+	[TCA_KIND]		= { .type = NLA_STRING },
 	[TCA_RATE]		= { .type = NLA_BINARY,
 				    .len = sizeof(struct tc_estimator) },
 	[TCA_STAB]		= { .type = NLA_NESTED },
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 63/197 net_sched: fix backward compatibility for TCA_ACT_KIND

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit 4b793feccae3b06764268377a4030eb774ed924e ]

For TCA_ACT_KIND, we have to keep the backward compatibility too, and rely on nla_strlcpy() to check and terminate the string with a NUL.

Note for TC actions, nla_strcmp() is already used to compare kind strings, so we don't need to fix other places.

Fixes 199ce850ce11 ("net_sched: add policy validation for action attributes")
Cc Jamal Hadi Salim <[email protected]>
Cc Jiri Pirko <[email protected]>
---
 net/sched/act_api.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
net/sched/act_api.c +5 -4
index 2558f00f6b3ed..4e7429c6f8649 100644
@@ -832,8 +832,7 @@ static struct tc_cookie *nla_memdup_cookie(struct nlattr **tb)
 }
 
 static const struct nla_policy tcf_action_policy[TCA_ACT_MAX + 1] = {
-	[TCA_ACT_KIND]		= { .type = NLA_NUL_STRING,
-				    .len = IFNAMSIZ - 1 },
+	[TCA_ACT_KIND]		= { .type = NLA_STRING },
 	[TCA_ACT_INDEX]		= { .type = NLA_U32 },
 	[TCA_ACT_COOKIE]	= { .type = NLA_BINARY,
 				    .len = TC_COOKIE_MAX_SIZE },
@@ -865,8 +864,10 @@ struct tc_action *tcf_action_init_1(struct net *net, struct tcf_proto *tp,
 			NL_SET_ERR_MSG(extack, "TC action kind must be specified");
 			goto err_out;
 		}
-		nla_strlcpy(act_name, kind, IFNAMSIZ);
-
+		if (nla_strlcpy(act_name, kind, IFNAMSIZ) >= IFNAMSIZ) {
+			NL_SET_ERR_MSG(extack, "TC action name too long");
+			goto err_out;
+		}
 		if (tb[TCA_ACT_COOKIE]) {
 			cookie = nla_memdup_cookie(tb);
 			if (!cookie) {
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 64/197 libata/ahci: Fix PCS quirk application

In reply to Greg Kroah-Hartman

From: Dan Williams <[email protected]>

[ Upstream commit 09d6ac8dc51a033ae0043c1fe40b4d02563c2496 ]

Commit c312ef176399 "libata/ahci: Drop PCS quirk for Denverton and beyond" got the polarity wrong on the check for which board-ids should have the quirk applied. The board type board_ahci_pcs7 is defined at the end of the list such that "pcs7" boards can be special cased in the future if they need the quirk. All prior Intel board ids "< board_ahci_pcs7" should proceed with applying the quirk.

Fixes c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
---
 drivers/ata/ahci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/ata/ahci.c +3 -1
index 3e63294304c72..691852b8bb41f 100644
@@ -1617,7 +1617,9 @@ static void ahci_intel_pcs_quirk(struct pci_dev *pdev, struct ahci_host_priv *hp
 	 */
 	if (!id || id->vendor != PCI_VENDOR_ID_INTEL)
 		return;
-	if (((enum board_ids) id->driver_data) < board_ahci_pcs7)
+
+	/* Skip applying the quirk on Denverton and beyond */
+	if (((enum board_ids) id->driver_data) >= board_ahci_pcs7)
 		return;
 
 	/*
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 65/197 md/raid0: fix warning message for parameter default_layout

In reply to Greg Kroah-Hartman

From: Song Liu <[email protected]>

[ Upstream commit 3874d73e06c9b9dc15de0b7382fc223986d75571 ]

The message should match the parameter, i.e. raid0.default_layout.

Fixes c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc NeilBrown <[email protected]>
---
 drivers/md/raid0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/raid0.c +1 -1
index 297bbc0f41f05..c3445d2cedb9d 100644
@@ -151,7 +151,7 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
 	} else {
 		pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",
 		       mdname(mddev));
-		pr_err("md/raid0: please set raid.default_layout to 1 or 2\n");
+		pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");
 		err = -ENOTSUPP;
 		goto abort;
 	}
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 66/197 Revert "drm/radeon: Fix EEH during kexec"

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

[ Upstream commit 8d13c187c42e110625d60094668a8f778c092879 ]

This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6.

This breaks some boards. Maybe just enable this on PPC for now?

---
 drivers/gpu/drm/radeon/radeon_drv.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/gpu/drm/radeon/radeon_drv.c +0 -8
index 5cc0fbb04ab14..7033f3a38c878 100644
@@ -380,19 +380,11 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
-	struct drm_device *ddev = pci_get_drvdata(pdev);
-
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
-
-	/* Some adapters need to be suspended before a
-	* shutdown occurs in order to prevent an error
-	* during kexec.
-	*/
-	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 67/197 ocfs2: fix panic due to ocfs2_wq is null

In reply to Greg Kroah-Hartman

From: Yi Li <[email protected]>

commit b918c43021baaa3648de09e19a4a3dd555a45f40 upstream.

mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters an error. ocfs2_initialize_super() returns before allocating ocfs2_wq. ocfs2_dismount_volume() triggers the following panic.

  Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted.
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30
  ------------[ cut here ]------------
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G  E
        4.14.148-200.ckv.x86_64 #1
  Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018
  task: ffff967af0520000 task.stack: ffffa5f05484000
  RIP: 0010:mutex_lock+0x19/0x20
  Call Trace:
    flush_workqueue+0x81/0x460
    ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2]
    ocfs2_dismount_volume+0x84/0x400 [ocfs2]
    ocfs2_fill_super+0xa4/0x1270 [ocfs2]
    ? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2]
    mount_bdev+0x17f/0x1c0
    mount_fs+0x3a/0x160
---
 fs/ocfs2/journal.c    |    3 ++-
 fs/ocfs2/localalloc.c |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
fs/ocfs2/journal.c +2 -1
@@ -217,7 +217,8 @@ void ocfs2_recovery_exit(struct ocfs2_su
 	/* At this point, we know that no more recovery threads can be
 	 * launched, so wait for any recovery completion work to
 	 * complete. */
-	flush_workqueue(osb->ocfs2_wq);
+	if (osb->ocfs2_wq)
+		flush_workqueue(osb->ocfs2_wq);
 
 	/*
 	 * Now that recovery is shut down, and the osb is about to be
fs/ocfs2/localalloc.c +2 -1
@@ -377,7 +377,8 @@ void ocfs2_shutdown_local_alloc(struct o
 	struct ocfs2_dinode *alloc = NULL;
 
 	cancel_delayed_work(&osb->la_enable_wq);
-	flush_workqueue(osb->ocfs2_wq);
+	if (osb->ocfs2_wq)
+		flush_workqueue(osb->ocfs2_wq);
 
 	if (osb->local_alloc_state == OCFS2_LA_UNUSED)
 		goto out;
author maintainer
#68 lore raw

PATCH 68/197 nvme-pci: Set the prp2 correctly when using more than 4k page

In reply to Greg Kroah-Hartman

From: Kevin Hao <[email protected]>

commit a4f40484e7f1dff56bb9f286cc59ffa36e0259eb upstream.

In the current code, the nvme is using a fixed 4k PRP entry size, but if the kernel use a page size which is more than 4k, we should consider the situation that the bv_offset may be larger than the dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then cause the command can't be executed correctly.

Fixes dff824b2aadb ("nvme-pci: optimize mapping of small single segment requests")
---
 drivers/nvme/host/pci.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/pci.c +2 -1
@@ -769,7 +769,8 @@ static blk_status_t nvme_setup_prp_simpl
 		struct bio_vec *bv)
 {
 	struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
-	unsigned int first_prp_len = dev->ctrl.page_size - bv->bv_offset;
+	unsigned int offset = bv->bv_offset & (dev->ctrl.page_size - 1);
+	unsigned int first_prp_len = dev->ctrl.page_size - offset;
 
 	iod->first_dma = dma_map_bvec(dev->dev, bv, rq_dma_dir(req), 0);
 	if (dma_mapping_error(dev->dev, iod->first_dma))
author maintainer
#69 lore raw

PATCH 69/197 ipv4: fix race condition between route lookup and invalidation

In reply to Greg Kroah-Hartman

From: Wei Wang <[email protected]>

[ Upstream commit 5018c59607a511cdee743b629c76206d9c9e6d7b ]

Jesse and Ido reported the following race condition:
<CPU A, t0> - Received packet A is forwarded and cached dst entry is taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set()

<t1> - Given Jesse has busy routers ("ingesting full BGP routing tables from multiple ISPs"), route is added / deleted and rt_cache_flush() is called

<CPU B, t2> - Received packet B tries to use the same cached dst entry from t0, but rt_cache_valid() is no longer true and it is replaced in rt_cache_route() by the newer one. This calls dst_dev_put() on the original dst entry which assigns the blackhole netdev to 'dst->dev'

<CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due to 'dst->dev' being the blackhole netdev

There are 2 issues in the v4 routing code:
1. A per-netns counter is used to do the validation of the route. That means whenever a route is changed in the netns, users of all routes in the netns needs to redo lookup. v6 has an implementation of only updating fn_sernum for routes that are affected.
2. When rt_cache_valid() returns false, rt_cache_route() is called to throw away the current cache, and create a new one. This seems unnecessary because as long as this route does not change, the route cache does not need to be recreated.

To fully solve the above 2 issues, it probably needs quite some code changes and requires careful testing, and does not suite for net branch.

So this patch only tries to add the deleted cached rt into the uncached list, so user could still be able to use it to receive packets until it's done.

---
 net/ipv4/route.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv4/route.c +1 -1
@@ -1482,7 +1482,7 @@ static bool rt_cache_route(struct fib_nh
 	prev = cmpxchg(p, orig, rt);
 	if (prev == orig) {
 		if (orig) {
-			dst_dev_put(&orig->dst);
+			rt_add_uncached_list(orig);
 			dst_release(&orig->dst);
 		}
 	} else {
author maintainer
#70 lore raw

PATCH 70/197 ipv4: Return -ENETUNREACH if we cant create route but saddr is valid

In reply to Greg Kroah-Hartman

From: Stefano Brivio <[email protected]>

[ Upstream commit 595e0651d0296bad2491a4a29a7a43eae6328b02 ]

...instead of -EINVAL. An issue was found with older kernel versions while unplugging a NFS client with pending RPCs, and the wrong error code here prevented it from recovering once link is back up with a configured address.

Incidentally, this is not an issue anymore since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context"), included in 5.2-rc7, had the effect of decoupling the forwarding of this error by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin Coddington.

To the best of my knowledge, this isn't currently causing any further issue, but the error code doesn't look appropriate anyway, and we might hit this in other paths as well.

In detail, as analysed by Gonzalo Siero, once the route is deleted because the interface is down, and can't be resolved and we return -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(), as the socket error seen by tcp_write_err(), called by tcp_retransmit_timer().

In turn, tcp_write_err() indirectly calls xs_error_report(), which wakes up the RPC pending tasks with a status of -EINVAL. This is then seen by call_status() in the SUN RPC implementation, which aborts the RPC call calling rpc_exit(), instead of handling this as a potentially temporary condition, i.e. as a timeout.

Return -EINVAL only if the input parameters passed to ip_route_output_key_hash_rcu() are actually invalid (this is the case if the specified source address is multicast, limited broadcast or all zeroes), but return -ENETUNREACH in all cases where, at the given moment, the given source address doesn't allow resolving the route.

While at it, drop the initialisation of err to -ENETUNREACH, which was added to __ip_route_output_key() back then by commit 0315e3827048 ("net: Fix behaviour of unreachable, blackhole and prohibit routes"), but actually had no effect, as it was, and is, overwritten by the fib_lookup() return code assignment, and anyway ignored in all other branches, including the if (fl4->saddr) one:
I find this rather confusing, as it would look like -ENETUNREACH is the "default" error, while that statement has no effect.

Also note that after commit fc75fc8339e7 ("ipv4: dont create routes on down devices"), we would get -ENETUNREACH if the device is down, but -EINVAL if the source address is specified and we can't resolve the route, and this appears to be rather inconsistent.

---
 net/ipv4/route.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
net/ipv4/route.c +6 -3
@@ -2470,14 +2470,17 @@ struct rtable *ip_route_output_key_hash_
 	int orig_oif = fl4->flowi4_oif;
 	unsigned int flags = 0;
 	struct rtable *rth;
-	int err = -ENETUNREACH;
+	int err;
 
 	if (fl4->saddr) {
-		rth = ERR_PTR(-EINVAL);
 		if (ipv4_is_multicast(fl4->saddr) ||
 		    ipv4_is_lbcast(fl4->saddr) ||
-		    ipv4_is_zeronet(fl4->saddr))
+		    ipv4_is_zeronet(fl4->saddr)) {
+			rth = ERR_PTR(-EINVAL);
 			goto out;
+		}
+
+		rth = ERR_PTR(-ENETUNREACH);
 
 		/* I removed check for oif == dev_out->oif here.
 		   It was wrong for two reasons:
author maintainer
#71 lore raw

PATCH 71/197 net: avoid potential infinite loop in tc_ctl_action()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 39f13ea2f61b439ebe0060393e9c39925c9ee28c ]

tc_ctl_action() has the ability to loop forever if tcf_action_add() returns -EAGAIN.

This special case has been done in case a module needed to be loaded, but it turns out that tcf_add_notify() could also return -EAGAIN if the socket sk_rcvbuf limit is hit.

We need to separate the two cases, and only loop for the module loading case.

While we are at it, add a limit of 10 attempts since unbounded loops are always scary.

syzbot repro was something like :

socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
write(3, ..., 38) = 38
setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)

NMI backtrace for cpu 0

CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
 check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
 watchdog+0x9d0/0xef0 kernel/hung_task.c:289
 kthread+0x361/0x430 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046
RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914
RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1
R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f
R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003
FS:  00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
 _raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
 __wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
 __wake_up+0xe/0x10 kernel/sched/wait.c:142
 netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
 netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
 netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
 netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
 rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
 tcf_add_notify net/sched/act_api.c:1343 [inline]
 tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
 tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440939
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by [email protected]
---
 net/sched/act_api.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
net/sched/act_api.c +8 -6
@@ -1353,11 +1353,16 @@ static int tcf_action_add(struct net *ne
 			  struct netlink_ext_ack *extack)
 {
 	size_t attr_size = 0;
-	int ret = 0;
+	int loop, ret;
 	struct tc_action *actions[TCA_ACT_MAX_PRIO] = {};
 
-	ret = tcf_action_init(net, NULL, nla, NULL, NULL, ovr, 0, actions,
-			      &attr_size, true, extack);
+	for (loop = 0; loop < 10; loop++) {
+		ret = tcf_action_init(net, NULL, nla, NULL, NULL, ovr, 0,
+				      actions, &attr_size, true, extack);
+		if (ret != -EAGAIN)
+			break;
+	}
+
 	if (ret < 0)
 		return ret;
 	ret = tcf_add_notify(net, n, actions, portid, attr_size, extack);
@@ -1407,11 +1412,8 @@ static int tc_ctl_action(struct sk_buff
 		 */
 		if (n->nlmsg_flags & NLM_F_REPLACE)
 			ovr = 1;
-replay:
 		ret = tcf_action_add(net, tca[TCA_ACT_TAB], n, portid, ovr,
 				     extack);
-		if (ret == -EAGAIN)
-			goto replay;
 		break;
 	case RTM_DELACTION:
 		ret = tca_action_gd(net, tca[TCA_ACT_TAB], n,
author maintainer
#72 lore raw

PATCH 72/197 net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit efb86fede98cdc70b674692ff617b1162f642c49 ]

The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference.

Fixes aa09677cba42 ("net: bcmgenet: add MDIO routines")
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.h |    1 +
 drivers/net/ethernet/broadcom/genet/bcmmii.c   |    6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/genet/bcmgenet.h +1 -0
@@ -366,6 +366,7 @@ struct bcmgenet_mib_counters {
 #define  EXT_PWR_DOWN_PHY_EN		(1 << 20)
 
 #define EXT_RGMII_OOB_CTRL		0x0C
+#define  RGMII_MODE_EN_V123		(1 << 0)
 #define  RGMII_LINK			(1 << 4)
 #define  OOB_DISABLE			(1 << 5)
 #define  RGMII_MODE_EN			(1 << 6)
drivers/net/ethernet/broadcom/genet/bcmmii.c +5 -1
@@ -258,7 +258,11 @@ int bcmgenet_mii_config(struct net_devic
 	 */
 	if (priv->ext_phy) {
 		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
-		reg |= RGMII_MODE_EN | id_mode_dis;
+		reg |= id_mode_dis;
+		if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
+			reg |= RGMII_MODE_EN_V123;
+		else
+			reg |= RGMII_MODE_EN;
 		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
 	}
 
author maintainer
#73 lore raw

PATCH 73/197 net: bcmgenet: Set phydev->dev_flags only for internal PHYs

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]

phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used.

Fixes 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/genet/bcmmii.c +3 -2
@@ -277,11 +277,12 @@ int bcmgenet_mii_probe(struct net_device
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct device_node *dn = priv->pdev->dev.of_node;
 	struct phy_device *phydev;
-	u32 phy_flags;
+	u32 phy_flags = 0;
 	int ret;
 
 	/* Communicate the integrated PHY revision */
-	phy_flags = priv->gphy_rev;
+	if (priv->internal_phy)
+		phy_flags = priv->gphy_rev;
 
 	/* Initialize link state variables that bcmgenet_mii_setup() uses */
 	priv->old_link = -1;
author maintainer
#74 lore raw

PATCH 74/197 net: i82596: fix dma_alloc_attr for sni_82596

In reply to Greg Kroah-Hartman

From: Thomas Bogendoerfer <[email protected]>

[ Upstream commit 61c1d33daf7b5146f44d4363b3322f8cda6a6c43 ]

Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596.

Fixes 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
---
 drivers/net/ethernet/i825xx/lasi_82596.c |    4 +++-
 drivers/net/ethernet/i825xx/lib82596.c   |    4 ++--
 drivers/net/ethernet/i825xx/sni_82596.c  |    4 +++-
 3 files changed, 8 insertions(+), 4 deletions(-)
drivers/net/ethernet/i825xx/lasi_82596.c +3 -1
@@ -96,6 +96,8 @@
 
 #define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
 
+#define LIB82596_DMA_ATTR	DMA_ATTR_NON_CONSISTENT
+
 #define DMA_WBACK(ndev, addr, len) \
 	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_TO_DEVICE); } while (0)
 
@@ -200,7 +202,7 @@ static int __exit lan_remove_chip(struct
 
 	unregister_netdev (dev);
 	dma_free_attrs(&pdev->dev, sizeof(struct i596_private), lp->dma,
-		       lp->dma_addr, DMA_ATTR_NON_CONSISTENT);
+		       lp->dma_addr, LIB82596_DMA_ATTR);
 	free_netdev (dev);
 	return 0;
 }
drivers/net/ethernet/i825xx/lib82596.c +2 -2
@@ -1065,7 +1065,7 @@ static int i82596_probe(struct net_devic
 
 	dma = dma_alloc_attrs(dev->dev.parent, sizeof(struct i596_dma),
 			      &lp->dma_addr, GFP_KERNEL,
-			      DMA_ATTR_NON_CONSISTENT);
+			      LIB82596_DMA_ATTR);
 	if (!dma) {
 		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
 		return -ENOMEM;
@@ -1087,7 +1087,7 @@ static int i82596_probe(struct net_devic
 	i = register_netdev(dev);
 	if (i) {
 		dma_free_attrs(dev->dev.parent, sizeof(struct i596_dma),
-			       dma, lp->dma_addr, DMA_ATTR_NON_CONSISTENT);
+			       dma, lp->dma_addr, LIB82596_DMA_ATTR);
 		return i;
 	}
 
drivers/net/ethernet/i825xx/sni_82596.c +3 -1
@@ -24,6 +24,8 @@
 
 static const char sni_82596_string[] = "snirm_82596";
 
+#define LIB82596_DMA_ATTR	0
+
 #define DMA_WBACK(priv, addr, len)     do { } while (0)
 #define DMA_INV(priv, addr, len)       do { } while (0)
 #define DMA_WBACK_INV(priv, addr, len) do { } while (0)
@@ -152,7 +154,7 @@ static int sni_82596_driver_remove(struc
 
 	unregister_netdev(dev);
 	dma_free_attrs(dev->dev.parent, sizeof(struct i596_private), lp->dma,
-		       lp->dma_addr, DMA_ATTR_NON_CONSISTENT);
+		       lp->dma_addr, LIB82596_DMA_ATTR);
 	iounmap(lp->ca);
 	iounmap(lp->mpu_port);
 	free_netdev (dev);
author maintainer
#75 lore raw

PATCH 75/197 net/ibmvnic: Fix EOI when running in XIVE mode.

In reply to Greg Kroah-Hartman

From: "C�dric Le Goater" <[email protected]>

[ Upstream commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab ]

pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode.

Fix that by calling the EOI handler of the interrupt chip.

Fixes f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset")
---
 drivers/net/ethernet/ibm/ibmvnic.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/net/ethernet/ibm/ibmvnic.c +3 -5
@@ -2772,12 +2772,10 @@ static int enable_scrq_irq(struct ibmvni
 
 	if (adapter->resetting &&
 	    adapter->reset_reason == VNIC_RESET_MOBILITY) {
-		u64 val = (0xff000000) | scrq->hw_irq;
+		struct irq_desc *desc = irq_to_desc(scrq->irq);
+		struct irq_chip *chip = irq_desc_get_chip(desc);
 
-		rc = plpar_hcall_norets(H_EOI, val);
-		if (rc)
-			dev_err(dev, "H_EOI FAILED irq 0x%llx. rc=%ld\n",
-				val, rc);
+		chip->irq_eoi(&desc->irq_data);
 	}
 
 	rc = plpar_hcall_norets(H_VIOCTL, adapter->vdev->unit_address,
author maintainer
#76 lore raw

PATCH 76/197 net: ipv6: fix listify ip6_rcv_finish in case of forwarding

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

[ Upstream commit c7a42eb49212f93a800560662d17d5293960d3c3 ]

We need a similar fix for ipv6 as Commit 0761680d5215 ("net: ipv4: fix listify ip_rcv_finish in case of forwarding") does for ipv4.

This issue can be reprocuded by syzbot since Commit 323ebb61e32b ("net:
use listified RX for handling GRO_NORMAL skbs") on net-next. The call trace was:

kernel BUG at include/linux/skbuff.h:2225!

  RIP: 0010:__skb_pull include/linux/skbuff.h:2225 [inline]
  RIP: 0010:skb_pull+0xea/0x110 net/core/skbuff.c:1902
  Call Trace:
    sctp_inq_pop+0x2f1/0xd80 net/sctp/inqueue.c:202
    sctp_endpoint_bh_rcv+0x184/0x8d0 net/sctp/endpointola.c:385
    sctp_inq_push+0x1e4/0x280 net/sctp/inqueue.c:80
    sctp_rcv+0x2807/0x3590 net/sctp/input.c:256
    sctp6_rcv+0x17/0x30 net/sctp/ipv6.c:1049
    ip6_protocol_deliver_rcu+0x2fe/0x1660 net/ipv6/ip6_input.c:397
    ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:438
    NF_HOOK include/linux/netfilter.h:305 [inline]
    NF_HOOK include/linux/netfilter.h:299 [inline]
    ip6_input+0xe4/0x3f0 net/ipv6/ip6_input.c:447
    dst_input include/net/dst.h:442 [inline]
    ip6_sublist_rcv_finish+0x98/0x1e0 net/ipv6/ip6_input.c:84
    ip6_list_rcv_finish net/ipv6/ip6_input.c:118 [inline]
    ip6_sublist_rcv+0x80c/0xcf0 net/ipv6/ip6_input.c:282
    ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:316
    __netif_receive_skb_list_ptype net/core/dev.c:5049 [inline]
    __netif_receive_skb_list_core+0x5fc/0x9d0 net/core/dev.c:5097
    __netif_receive_skb_list net/core/dev.c:5149 [inline]
    netif_receive_skb_list_internal+0x7eb/0xe60 net/core/dev.c:5244
    gro_normal_list.part.0+0x1e/0xb0 net/core/dev.c:5757
    gro_normal_list net/core/dev.c:5755 [inline]
    gro_normal_one net/core/dev.c:5769 [inline]
    napi_frags_finish net/core/dev.c:5782 [inline]
    napi_gro_frags+0xa6a/0xea0 net/core/dev.c:5855
    tun_get_user+0x2e98/0x3fa0 drivers/net/tun.c:1974
    tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2020
Fixes d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Fixes 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs")
Reported-by [email protected]
Reported-by [email protected]
---
 net/ipv6/ip6_input.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/ipv6/ip6_input.c +3 -1
@@ -80,8 +80,10 @@ static void ip6_sublist_rcv_finish(struc
 {
 	struct sk_buff *skb, *next;
 
-	list_for_each_entry_safe(skb, next, head, list)
+	list_for_each_entry_safe(skb, next, head, list) {
+		skb_list_del_init(skb);
 		dst_input(skb);
+	}
 }
 
 static void ip6_list_rcv_finish(struct net *net, struct sock *sk,
author maintainer
#77 lore raw

PATCH 77/197 net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow

In reply to Greg Kroah-Hartman

From: Biao Huang <[email protected]>

[ Upstream commit e497c20e203680aba9ccf7bb475959595908ca7e ]

disable ptp_ref_clk in suspend flow, and enable it in resume flow.

Fixes f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +8 -4
@@ -4480,8 +4480,10 @@ int stmmac_suspend(struct device *dev)
 		stmmac_mac_set(priv, priv->ioaddr, false);
 		pinctrl_pm_select_sleep_state(priv->device);
 		/* Disable clock in case of PWM is off */
-		clk_disable(priv->plat->pclk);
-		clk_disable(priv->plat->stmmac_clk);
+		if (priv->plat->clk_ptp_ref)
+			clk_disable_unprepare(priv->plat->clk_ptp_ref);
+		clk_disable_unprepare(priv->plat->pclk);
+		clk_disable_unprepare(priv->plat->stmmac_clk);
 	}
 	mutex_unlock(&priv->lock);
 
@@ -4544,8 +4546,10 @@ int stmmac_resume(struct device *dev)
 	} else {
 		pinctrl_pm_select_default_state(priv->device);
 		/* enable the clk previously disabled */
-		clk_enable(priv->plat->stmmac_clk);
-		clk_enable(priv->plat->pclk);
+		clk_prepare_enable(priv->plat->stmmac_clk);
+		clk_prepare_enable(priv->plat->pclk);
+		if (priv->plat->clk_ptp_ref)
+			clk_prepare_enable(priv->plat->clk_ptp_ref);
 		/* reset the phy so that it's ready */
 		if (priv->mii)
 			stmmac_mdio_reset(priv->mii);
author maintainer
#78 lore raw

PATCH 78/197 rxrpc: Fix possible NULL pointer access in ICMP handling

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit f0308fb0708078d6c1d8a4d533941a7a191af634 ]

If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as the UDP socket is being shut down, rxrpc_error_report() may get called to deal with it after sk_user_data on the UDP socket has been cleared, leading to a NULL pointer access when this local endpoint record gets accessed.

Fix this by just returning immediately if sk_user_data was NULL.

The oops looks like the following:

#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...

RIP: 0010:rxrpc_error_report+0x1bd/0x6a9
...
Call Trace:
 ? sock_queue_err_skb+0xbd/0xde
 ? __udp4_lib_err+0x313/0x34d
 __udp4_lib_err+0x313/0x34d
 icmp_unreach+0x1ee/0x207
 icmp_rcv+0x25b/0x28f
 ip_protocol_deliver_rcu+0x95/0x10e
 ip_local_deliver+0xe9/0x148
 __netif_receive_skb_one_core+0x52/0x6e
 process_backlog+0xdc/0x177
 net_rx_action+0xf9/0x270
 __do_softirq+0x1b6/0x39a
 ? smpboot_register_percpu_thread+0xce/0xce
 run_ksoftirqd+0x1d/0x42
 smpboot_thread_fn+0x19e/0x1b3
 kthread+0xf1/0xf6
 ? kthread_delayed_work_timer_fn+0x83/0x83
 ret_from_fork+0x24/0x30
Fixes 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by [email protected]
---
 net/rxrpc/peer_event.c |    3 +++
 1 file changed, 3 insertions(+)
net/rxrpc/peer_event.c +3 -0
@@ -151,6 +151,9 @@ void rxrpc_error_report(struct sock *sk)
 	struct rxrpc_peer *peer;
 	struct sk_buff *skb;
 
+	if (unlikely(!local))
+		return;
+
 	_enter("%p{%d}", sk, local->debug_id);
 
 	/* Clear the outstanding error value on the socket so that it doesn't
author maintainer
#79 lore raw

PATCH 79/197 sched: etf: Fix ordering of packets with same txtime

In reply to Greg Kroah-Hartman

From: Vinicius Costa Gomes <[email protected]>

[ Upstream commit 28aa7c86c2b49f659c8460a89e53b506c45979bb ]

When a application sends many packets with the same txtime, they may be transmitted out of order (different from the order in which they were enqueued).

This happens because when inserting elements into the tree, when the txtime of two packets are the same, the new packet is inserted at the left side of the tree, causing the reordering. The only effect of this change should be that packets with the same txtime will be transmitted in the order they are enqueued.

The application in question (the AVTP GStreamer plugin, still in development) is sending video traffic, in which each video frame have a single presentation time, the problem is that when packetizing, multiple packets end up with the same txtime.

The receiving side was rejecting packets because they were being received out of order.

Fixes 25db26a91364 ("net/sched: Introduce the ETF Qdisc")
---
 net/sched/sch_etf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sched/sch_etf.c +1 -1
@@ -177,7 +177,7 @@ static int etf_enqueue_timesortedlist(st
 
 		parent = *p;
 		skb = rb_to_skb(parent);
-		if (ktime_after(txtime, skb->tstamp)) {
+		if (ktime_compare(txtime, skb->tstamp) >= 0) {
 			p = &parent->rb_right;
 			leftmost = false;
 		} else {
author maintainer
#80 lore raw

PATCH 80/197 sctp: change sctp_prot .no_autobind with true

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

[ Upstream commit 63dfb7938b13fa2c2fbcb45f34d065769eb09414 ]

syzbot reported a memory leak:

  BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
  backtrace:
    [...] slab_alloc mm/slab.c:3319 [inline]
    [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
    [...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
    [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
    [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
    [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
    [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
    [...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
    [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
    [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
    [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
    [...] __do_sys_setsockopt net/socket.c:2100 [inline]

It was caused by when sending msgs without binding a port, in the path:
inet_sendmsg() -> inet_send_prepare() -> inet_autobind() -> .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is not. Later when binding another port by sctp_setsockopt_bindx(), a new bucket will be created as bp->port is not set.

sctp's autobind is supposed to call sctp_autobind() where it does all things including setting bp->port. Since sctp_autobind() is called in sctp_sendmsg() if the sk is not yet bound, it should have skipped the auto bind.

THis patch is to avoid calling inet_autobind() in inet_send_prepare() by changing sctp_prot .no_autobind with true, also remove the unused .get_port.

---
 net/sctp/socket.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/sctp/socket.c +2 -2
@@ -9353,7 +9353,7 @@ struct proto sctp_prot = {
 	.backlog_rcv =	sctp_backlog_rcv,
 	.hash        =	sctp_hash,
 	.unhash      =	sctp_unhash,
-	.get_port    =	sctp_get_port,
+	.no_autobind =	true,
 	.obj_size    =  sizeof(struct sctp_sock),
 	.useroffset  =  offsetof(struct sctp_sock, subscribe),
 	.usersize    =  offsetof(struct sctp_sock, initmsg) -
@@ -9395,7 +9395,7 @@ struct proto sctpv6_prot = {
 	.backlog_rcv	= sctp_backlog_rcv,
 	.hash		= sctp_hash,
 	.unhash		= sctp_unhash,
-	.get_port	= sctp_get_port,
+	.no_autobind	= true,
 	.obj_size	= sizeof(struct sctp6_sock),
 	.useroffset	= offsetof(struct sctp6_sock, sctp.subscribe),
 	.usersize	= offsetof(struct sctp6_sock, sctp.initmsg) -
author maintainer
#81 lore raw

PATCH 81/197 net: aquantia: temperature retrieval fix

In reply to Greg Kroah-Hartman

From: Igor Russkikh <[email protected]>

[ Upstream commit 06b0d7fe7e5ff3ba4c7e265ef41135e8bcc232bb ]

Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC.

Fixes 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature")
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c +1 -1
@@ -337,7 +337,7 @@ static int aq_fw2x_get_phy_temp(struct a
 	/* Convert PHY temperature from 1/256 degree Celsius
 	 * to 1/1000 degree Celsius.
 	 */
-	*temp = temp_res  * 1000 / 256;
+	*temp = (temp_res & 0xFFFF) * 1000 / 256;
 
 	return 0;
 }
author maintainer
#82 lore raw

PATCH 82/197 net: aquantia: when cleaning hw cache it should be toggled

In reply to Greg Kroah-Hartman

From: Igor Russkikh <[email protected]>

[ Upstream commit ed4d81c4b3f28ccf624f11fd66f67aec5b58859c ]

Quoted 1 line

From HW specification to correctly reset HW caches (this is a required

workaround when stopping the device), register bit should actually be toggled.

It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up.

Fixes 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind")
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c           |   16 +++++++-
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c          |   17 +++++++-
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h          |    7 ++-
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h |   19 ++++++++++
 4 files changed, 53 insertions(+), 6 deletions(-)
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +14 -2
@@ -968,14 +968,26 @@ static int hw_atl_b0_hw_interrupt_modera
 
 static int hw_atl_b0_hw_stop(struct aq_hw_s *self)
 {
+	int err;
+	u32 val;
+
 	hw_atl_b0_hw_irq_disable(self, HW_ATL_B0_INT_MASK);
 
 	/* Invalidate Descriptor Cache to prevent writing to the cached
 	 * descriptors and to the data pointer of those descriptors
 	 */
-	hw_atl_rdm_rx_dma_desc_cache_init_set(self, 1);
+	hw_atl_rdm_rx_dma_desc_cache_init_tgl(self);
+
+	err = aq_hw_err_from_flags(self);
+
+	if (err)
+		goto err_exit;
+
+	readx_poll_timeout_atomic(hw_atl_rdm_rx_dma_desc_cache_init_done_get,
+				  self, val, val == 1, 1000U, 10000U);
 
-	return aq_hw_err_from_flags(self);
+err_exit:
+	return err;
 }
 
 static int hw_atl_b0_hw_ring_tx_stop(struct aq_hw_s *self,
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c +15 -2
@@ -606,12 +606,25 @@ void hw_atl_rpb_rx_flow_ctl_mode_set(str
 			    HW_ATL_RPB_RX_FC_MODE_SHIFT, rx_flow_ctl_mode);
 }
 
-void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init)
+void hw_atl_rdm_rx_dma_desc_cache_init_tgl(struct aq_hw_s *aq_hw)
 {
+	u32 val;
+
+	val = aq_hw_read_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR,
+				 HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK,
+				 HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT);
+
 	aq_hw_write_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR,
 			    HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK,
 			    HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT,
-			    init);
+			    val ^ 1);
+}
+
+u32 hw_atl_rdm_rx_dma_desc_cache_init_done_get(struct aq_hw_s *aq_hw)
+{
+	return aq_hw_read_reg_bit(aq_hw, RDM_RX_DMA_DESC_CACHE_INIT_DONE_ADR,
+				  RDM_RX_DMA_DESC_CACHE_INIT_DONE_MSK,
+				  RDM_RX_DMA_DESC_CACHE_INIT_DONE_SHIFT);
 }
 
 void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw,
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h +5 -2
@@ -313,8 +313,11 @@ void hw_atl_rpb_rx_pkt_buff_size_per_tc_
 					    u32 rx_pkt_buff_size_per_tc,
 					    u32 buffer);
 
-/* set rdm rx dma descriptor cache init */
-void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init);
+/* toggle rdm rx dma descriptor cache init */
+void hw_atl_rdm_rx_dma_desc_cache_init_tgl(struct aq_hw_s *aq_hw);
+
+/* get rdm rx dma descriptor cache init done */
+u32 hw_atl_rdm_rx_dma_desc_cache_init_done_get(struct aq_hw_s *aq_hw);
 
 /* set rx xoff enable (per tc) */
 void hw_atl_rpb_rx_xoff_en_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_xoff_en_per_tc,
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +19 -0
@@ -318,6 +318,25 @@
 /* default value of bitfield rdm_desc_init_i */
 #define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_DEFAULT 0x0
 
+/* rdm_desc_init_done_i bitfield definitions
+ * preprocessor definitions for the bitfield rdm_desc_init_done_i.
+ * port="pif_rdm_desc_init_done_i"
+ */
+
+/* register address for bitfield rdm_desc_init_done_i */
+#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_ADR 0x00005a10
+/* bitmask for bitfield rdm_desc_init_done_i */
+#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_MSK 0x00000001U
+/* inverted bitmask for bitfield rdm_desc_init_done_i */
+#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_MSKN 0xfffffffe
+/* lower bit position of bitfield  rdm_desc_init_done_i */
+#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_SHIFT 0U
+/* width of bitfield rdm_desc_init_done_i */
+#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_WIDTH 1
+/* default value of bitfield rdm_desc_init_done_i */
+#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_DEFAULT 0x0
+
+
 /* rx int_desc_wrb_en bitfield definitions
  * preprocessor definitions for the bitfield "int_desc_wrb_en".
  * port="pif_rdm_int_desc_wrb_en_i"
author maintainer
#83 lore raw

PATCH 83/197 net: aquantia: do not pass lro session with invalid tcp checksum

In reply to Greg Kroah-Hartman

From: Dmitry Bogdanov <[email protected]>

[ Upstream commit d08b9a0a3ebdf71b0aabe576c7dd48e57e80e0f0 ]

Individual descriptors on LRO TCP session should be checked for CRC errors. It was discovered that HW recalculates L4 checksums on LRO session and does not break it up on bad L4 csum.

Thus, driver should aggregate HW LRO L4 statuses from all individual buffers of LRO session and drop packet if one of the buffers has bad L4 checksum.

Fixes f38f1ee8aeb2 ("net: aquantia: check rx csum for all packets in LRO session")
---
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/aquantia/atlantic/aq_ring.c +2 -1
@@ -313,6 +313,7 @@ int aq_ring_rx_clean(struct aq_ring_s *s
 					break;
 
 				buff->is_error |= buff_->is_error;
+				buff->is_cso_err |= buff_->is_cso_err;
 
 			} while (!buff_->is_eop);
 
@@ -320,7 +321,7 @@ int aq_ring_rx_clean(struct aq_ring_s *s
 				err = 0;
 				goto err_exit;
 			}
-			if (buff->is_error) {
+			if (buff->is_error || buff->is_cso_err) {
 				buff_ = buff;
 				do {
 					next_ = buff_->next,
author maintainer
#84 lore raw

PATCH 84/197 net: aquantia: correctly handle macvlan and multicast coexistence

In reply to Greg Kroah-Hartman

From: Dmitry Bogdanov <[email protected]>

[ Upstream commit 9f051db566da1e8110659ab4ab188af1c2510bb4 ]

macvlan and multicast handling is now mixed up.
The explicit issue is that macvlan interface gets broken (no traffic) after clearing MULTICAST flag on the real interface.

We now do separate logic and consider both ALLMULTI and MULTICAST flags on the device.

Fixes 11ba961c9161 ("net: aquantia: Fix IFF_ALLMULTI flag functionality")
---
 drivers/net/ethernet/aquantia/atlantic/aq_main.c          |    4 -
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c           |   32 +++++++-------
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c |    7 +--
 3 files changed, 21 insertions(+), 22 deletions(-)
drivers/net/ethernet/aquantia/atlantic/aq_main.c +1 -3
@@ -194,9 +194,7 @@ static void aq_ndev_set_multicast_settin
 {
 	struct aq_nic_s *aq_nic = netdev_priv(ndev);
 
-	aq_nic_set_packet_filter(aq_nic, ndev->flags);
-
-	aq_nic_set_multicast_list(aq_nic, ndev);
+	(void)aq_nic_set_multicast_list(aq_nic, ndev);
 }
 
 static int aq_ndo_vlan_rx_add_vid(struct net_device *ndev, __be16 proto,
drivers/net/ethernet/aquantia/atlantic/aq_nic.c +16 -16
@@ -631,9 +631,12 @@ err_exit:
 
 int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev)
 {
-	unsigned int packet_filter = self->packet_filter;
+	const struct aq_hw_ops *hw_ops = self->aq_hw_ops;
+	struct aq_nic_cfg_s *cfg = &self->aq_nic_cfg;
+	unsigned int packet_filter = ndev->flags;
 	struct netdev_hw_addr *ha = NULL;
 	unsigned int i = 0U;
+	int err = 0;
 
 	self->mc_list.count = 0;
 	if (netdev_uc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) {
@@ -641,29 +644,26 @@ int aq_nic_set_multicast_list(struct aq_
 	} else {
 		netdev_for_each_uc_addr(ha, ndev) {
 			ether_addr_copy(self->mc_list.ar[i++], ha->addr);
-
-			if (i >= AQ_HW_MULTICAST_ADDRESS_MAX)
-				break;
 		}
 	}
 
-	if (i + netdev_mc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) {
-		packet_filter |= IFF_ALLMULTI;
-	} else {
-		netdev_for_each_mc_addr(ha, ndev) {
-			ether_addr_copy(self->mc_list.ar[i++], ha->addr);
-
-			if (i >= AQ_HW_MULTICAST_ADDRESS_MAX)
-				break;
+	cfg->is_mc_list_enabled = !!(packet_filter & IFF_MULTICAST);
+	if (cfg->is_mc_list_enabled) {
+		if (i + netdev_mc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) {
+			packet_filter |= IFF_ALLMULTI;
+		} else {
+			netdev_for_each_mc_addr(ha, ndev) {
+				ether_addr_copy(self->mc_list.ar[i++],
+						ha->addr);
+			}
 		}
 	}
 
 	if (i > 0 && i <= AQ_HW_MULTICAST_ADDRESS_MAX) {
-		packet_filter |= IFF_MULTICAST;
 		self->mc_list.count = i;
-		self->aq_hw_ops->hw_multicast_list_set(self->aq_hw,
-						       self->mc_list.ar,
-						       self->mc_list.count);
+		err = hw_ops->hw_multicast_list_set(self->aq_hw,
+						    self->mc_list.ar,
+						    self->mc_list.count);
 	}
 	return aq_nic_set_packet_filter(self, packet_filter);
 }
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +4 -3
@@ -818,14 +818,15 @@ static int hw_atl_b0_hw_packet_filter_se
 				     cfg->is_vlan_force_promisc);
 
 	hw_atl_rpfl2multicast_flr_en_set(self,
-					 IS_FILTER_ENABLED(IFF_ALLMULTI), 0);
+					 IS_FILTER_ENABLED(IFF_ALLMULTI) &&
+					 IS_FILTER_ENABLED(IFF_MULTICAST), 0);
 
 	hw_atl_rpfl2_accept_all_mc_packets_set(self,
-					       IS_FILTER_ENABLED(IFF_ALLMULTI));
+					      IS_FILTER_ENABLED(IFF_ALLMULTI) &&
+					      IS_FILTER_ENABLED(IFF_MULTICAST));
 
 	hw_atl_rpfl2broadcast_en_set(self, IS_FILTER_ENABLED(IFF_BROADCAST));
 
-	cfg->is_mc_list_enabled = IS_FILTER_ENABLED(IFF_MULTICAST);
 
 	for (i = HW_ATL_B0_MAC_MIN; i < HW_ATL_B0_MAC_MAX; ++i)
 		hw_atl_rpfl2_uc_flr_en_set(self,
author maintainer
#85 lore raw

PATCH 85/197 net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

[ Upstream commit 8b95599c55ed24b36cf44a4720067cfe67edbcb4 ]

The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs in the micrel PHY driver, it is used even with the KSZ87xx switch. This is wrong, since the KSZ8051 configures registers of the PHY which are not present on the simplified KSZ87xx switch PHYs and misconfigures other registers of the KSZ87xx switch PHYs.

Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the KSZ87xx switch by checking the Basic Status register Bit 0, which is read-only and indicates presence of the Extended Capability Registers. The KSZ8051 PHY has those registers while the KSZ87xx switch does not.

This patch implements simple check for the presence of this bit for both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct PHY driver instance.

Fixes 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795")
Cc Andrew Lunn <[email protected]>
Cc David S. Miller <[email protected]>
Cc Florian Fainelli <[email protected]>
Cc George McCollister <[email protected]>
Cc Heiner Kallweit <[email protected]>
Cc Sean Nyekjaer <[email protected]>
Cc Tristram Ha <[email protected]>
Cc Woojung Huh <[email protected]>
---
 drivers/net/phy/micrel.c |   40 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 36 insertions(+), 4 deletions(-)
drivers/net/phy/micrel.c +36 -4
@@ -341,6 +341,35 @@ static int ksz8041_config_aneg(struct ph
 	return genphy_config_aneg(phydev);
 }
 
+static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev,
+					    const u32 ksz_phy_id)
+{
+	int ret;
+
+	if ((phydev->phy_id & MICREL_PHY_ID_MASK) != ksz_phy_id)
+		return 0;
+
+	ret = phy_read(phydev, MII_BMSR);
+	if (ret < 0)
+		return ret;
+
+	/* KSZ8051 PHY and KSZ8794/KSZ8795/KSZ8765 switch share the same
+	 * exact PHY ID. However, they can be told apart by the extended
+	 * capability registers presence. The KSZ8051 PHY has them while
+	 * the switch does not.
+	 */
+	ret &= BMSR_ERCAP;
+	if (ksz_phy_id == PHY_ID_KSZ8051)
+		return ret;
+	else
+		return !ret;
+}
+
+static int ksz8051_match_phy_device(struct phy_device *phydev)
+{
+	return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8051);
+}
+
 static int ksz8081_config_init(struct phy_device *phydev)
 {
 	/* KSZPHY_OMSO_FACTORY_TEST is set at de-assertion of the reset line
@@ -364,6 +393,11 @@ static int ksz8061_config_init(struct ph
 	return kszphy_config_init(phydev);
 }
 
+static int ksz8795_match_phy_device(struct phy_device *phydev)
+{
+	return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8795);
+}
+
 static int ksz9021_load_values_from_of(struct phy_device *phydev,
 				       const struct device_node *of_node,
 				       u16 reg,
@@ -1017,8 +1051,6 @@ static struct phy_driver ksphy_driver[]
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
-	.phy_id		= PHY_ID_KSZ8051,
-	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8051",
 	/* PHY_BASIC_FEATURES */
 	.driver_data	= &ksz8051_type,
@@ -1029,6 +1061,7 @@ static struct phy_driver ksphy_driver[]
 	.get_sset_count = kszphy_get_sset_count,
 	.get_strings	= kszphy_get_strings,
 	.get_stats	= kszphy_get_stats,
+	.match_phy_device = ksz8051_match_phy_device,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
@@ -1141,13 +1174,12 @@ static struct phy_driver ksphy_driver[]
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
-	.phy_id		= PHY_ID_KSZ8795,
-	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8795",
 	/* PHY_BASIC_FEATURES */
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
+	.match_phy_device = ksz8795_match_phy_device,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
author maintainer
#86 lore raw

PATCH 86/197 net: phy: micrel: Update KSZ87xx PHY name

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

[ Upstream commit 1d951ba3da67bbc7a9b0e05987e09552c2060e18 ]

The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx

Cc Andrew Lunn <[email protected]>
Cc David S. Miller <[email protected]>
Cc Florian Fainelli <[email protected]>
Cc George McCollister <[email protected]>
Cc Heiner Kallweit <[email protected]>
Cc Sean Nyekjaer <[email protected]>
Cc Tristram Ha <[email protected]>
Cc Woojung Huh <[email protected]>
---
 drivers/net/phy/micrel.c   |    4 ++--
 include/linux/micrel_phy.h |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/net/phy/micrel.c +2 -2
@@ -395,7 +395,7 @@ static int ksz8061_config_init(struct ph
 
 static int ksz8795_match_phy_device(struct phy_device *phydev)
 {
-	return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8795);
+	return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ87XX);
 }
 
 static int ksz9021_load_values_from_of(struct phy_device *phydev,
@@ -1174,7 +1174,7 @@ static struct phy_driver ksphy_driver[]
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
-	.name		= "Micrel KSZ8795",
+	.name		= "Micrel KSZ87XX Switch",
 	/* PHY_BASIC_FEATURES */
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
include/linux/micrel_phy.h +1 -1
@@ -31,7 +31,7 @@
 #define PHY_ID_KSZ886X		0x00221430
 #define PHY_ID_KSZ8863		0x00221435
 
-#define PHY_ID_KSZ8795		0x00221550
+#define PHY_ID_KSZ87XX		0x00221550
 
 #define	PHY_ID_KSZ9477		0x00221631
 
author maintainer
#87 lore raw

PATCH 87/197 net: avoid errors when trying to pop MLPS header on non-MPLS packets

In reply to Greg Kroah-Hartman

From: Davide Caratti <[email protected]>

[ Upstream commit dedc5a08da07874c6e0d411e7f39c5c2cf137014 ]

the following script:

 # tc qdisc add dev eth0 clsact
 # tc filter add dev eth0 egress matchall action mpls pop

implicitly makes the kernel drop all packets transmitted by eth0, if they don't have a MPLS header. This behavior is uncommon: other encapsulations (like VLAN) just let the packet pass unmodified. Since the result of MPLS 'pop' operation would be the same regardless of the presence / absence of MPLS header(s) in the original packet, we can let skb_mpls_pop() return 0 when dealing with non-MPLS packets.

For the OVS use-case, this is acceptable because __ovs_nla_copy_actions() already ensures that MPLS 'pop' operation only occurs with packets having an MPLS Ethernet type (and there are no other callers in current code, so the semantic change should be ok).

v2: better documentation of use-cases for skb_mpls_pop(), thanks to Simon
Horman

Fixes 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
---
 net/core/skbuff.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/skbuff.c +1 -1
@@ -5524,7 +5524,7 @@ int skb_mpls_pop(struct sk_buff *skb, __
 	int err;
 
 	if (unlikely(!eth_p_mpls(skb->protocol)))
-		return -EINVAL;
+		return 0;
 
 	err = skb_ensure_writable(skb, skb->mac_len + MPLS_HLEN);
 	if (unlikely(err))
author maintainer
#88 lore raw

PATCH 88/197 net/sched: fix corrupted L2 header with MPLS push and pop actions

In reply to Greg Kroah-Hartman

From: Davide Caratti <[email protected]>

[ Upstream commit fa4e0f8855fcba600e0be2575ee29c69166f74bd ]

the following script:

 # tc qdisc add dev eth0 clsact
 # tc filter add dev eth0 egress protocol ip matchall \
Quoted 1 line

action mpls push protocol mpls_uc label 0x355aa bos 1

causes corruption of all IP packets transmitted by eth0. On TC egress, we can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push' operation will result in an overwrite of the first 4 octets in the packet L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same error pattern is present also in the MPLS 'pop' operation. Fix this error in act_mpls data plane, computing 'mac_len' as the difference between the network header and the mac header (when not at TC ingress), and use it in MPLS 'push'/'pop' core functions.

v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len'
in skb_mpls_pop(), reported by kbuild test robot

CC Lorenzo Bianconi <[email protected]>
Fixes 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
---
 include/linux/skbuff.h    |    5 +++--
 net/core/skbuff.c         |   19 +++++++++++--------
 net/openvswitch/actions.c |    5 +++--
 net/sched/act_mpls.c      |   12 ++++++++----
 4 files changed, 25 insertions(+), 16 deletions(-)
include/linux/skbuff.h +3 -2
@@ -3465,8 +3465,9 @@ int skb_ensure_writable(struct sk_buff *
 int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci);
 int skb_vlan_pop(struct sk_buff *skb);
 int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
-int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto);
-int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto);
+int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
+		  int mac_len);
+int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len);
 int skb_mpls_update_lse(struct sk_buff *skb, __be32 mpls_lse);
 int skb_mpls_dec_ttl(struct sk_buff *skb);
 struct sk_buff *pskb_extract(struct sk_buff *skb, int off, int to_copy,
net/core/skbuff.c +11 -8
@@ -5465,12 +5465,14 @@ static void skb_mod_eth_type(struct sk_b
  * @skb: buffer
  * @mpls_lse: MPLS label stack entry to push
  * @mpls_proto: ethertype of the new MPLS header (expects 0x8847 or 0x8848)
+ * @mac_len: length of the MAC header
  *
  * Expects skb->data at mac header.
  *
  * Returns 0 on success, -errno otherwise.
  */
-int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto)
+int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
+		  int mac_len)
 {
 	struct mpls_shim_hdr *lse;
 	int err;
@@ -5487,15 +5489,15 @@ int skb_mpls_push(struct sk_buff *skb, _
 		return err;
 
 	if (!skb->inner_protocol) {
-		skb_set_inner_network_header(skb, skb->mac_len);
+		skb_set_inner_network_header(skb, mac_len);
 		skb_set_inner_protocol(skb, skb->protocol);
 	}
 
 	skb_push(skb, MPLS_HLEN);
 	memmove(skb_mac_header(skb) - MPLS_HLEN, skb_mac_header(skb),
-		skb->mac_len);
+		mac_len);
 	skb_reset_mac_header(skb);
-	skb_set_network_header(skb, skb->mac_len);
+	skb_set_network_header(skb, mac_len);
 
 	lse = mpls_hdr(skb);
 	lse->label_stack_entry = mpls_lse;
@@ -5514,29 +5516,30 @@ EXPORT_SYMBOL_GPL(skb_mpls_push);
  *
  * @skb: buffer
  * @next_proto: ethertype of header after popped MPLS header
+ * @mac_len: length of the MAC header
  *
  * Expects skb->data at mac header.
  *
  * Returns 0 on success, -errno otherwise.
  */
-int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto)
+int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len)
 {
 	int err;
 
 	if (unlikely(!eth_p_mpls(skb->protocol)))
 		return 0;
 
-	err = skb_ensure_writable(skb, skb->mac_len + MPLS_HLEN);
+	err = skb_ensure_writable(skb, mac_len + MPLS_HLEN);
 	if (unlikely(err))
 		return err;
 
 	skb_postpull_rcsum(skb, mpls_hdr(skb), MPLS_HLEN);
 	memmove(skb_mac_header(skb) + MPLS_HLEN, skb_mac_header(skb),
-		skb->mac_len);
+		mac_len);
 
 	__skb_pull(skb, MPLS_HLEN);
 	skb_reset_mac_header(skb);
-	skb_set_network_header(skb, skb->mac_len);
+	skb_set_network_header(skb, mac_len);
 
 	if (skb->dev && skb->dev->type == ARPHRD_ETHER) {
 		struct ethhdr *hdr;
net/openvswitch/actions.c +3 -2
@@ -165,7 +165,8 @@ static int push_mpls(struct sk_buff *skb
 {
 	int err;
 
-	err = skb_mpls_push(skb, mpls->mpls_lse, mpls->mpls_ethertype);
+	err = skb_mpls_push(skb, mpls->mpls_lse, mpls->mpls_ethertype,
+			    skb->mac_len);
 	if (err)
 		return err;
 
@@ -178,7 +179,7 @@ static int pop_mpls(struct sk_buff *skb,
 {
 	int err;
 
-	err = skb_mpls_pop(skb, ethertype);
+	err = skb_mpls_pop(skb, ethertype, skb->mac_len);
 	if (err)
 		return err;
 
net/sched/act_mpls.c +8 -4
@@ -55,7 +55,7 @@ static int tcf_mpls_act(struct sk_buff *
 	struct tcf_mpls *m = to_mpls(a);
 	struct tcf_mpls_params *p;
 	__be32 new_lse;
-	int ret;
+	int ret, mac_len;
 
 	tcf_lastuse_update(&m->tcf_tm);
 	bstats_cpu_update(this_cpu_ptr(m->common.cpu_bstats), skb);
@@ -63,8 +63,12 @@ static int tcf_mpls_act(struct sk_buff *
 	/* Ensure 'data' points at mac_header prior calling mpls manipulating
 	 * functions.
 	 */
-	if (skb_at_tc_ingress(skb))
+	if (skb_at_tc_ingress(skb)) {
 		skb_push_rcsum(skb, skb->mac_len);
+		mac_len = skb->mac_len;
+	} else {
+		mac_len = skb_network_header(skb) - skb_mac_header(skb);
+	}
 
 	ret = READ_ONCE(m->tcf_action);
 
@@ -72,12 +76,12 @@ static int tcf_mpls_act(struct sk_buff *
 
 	switch (p->tcfm_action) {
 	case TCA_MPLS_ACT_POP:
-		if (skb_mpls_pop(skb, p->tcfm_proto))
+		if (skb_mpls_pop(skb, p->tcfm_proto, mac_len))
 			goto drop;
 		break;
 	case TCA_MPLS_ACT_PUSH:
 		new_lse = tcf_mpls_get_lse(NULL, p, !eth_p_mpls(skb->protocol));
-		if (skb_mpls_push(skb, new_lse, p->tcfm_proto))
+		if (skb_mpls_push(skb, new_lse, p->tcfm_proto, mac_len))
 			goto drop;
 		break;
 	case TCA_MPLS_ACT_MODIFY:
author maintainer
#89 lore raw

PATCH 89/197 netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exit

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit 33902b4a4227877896dd9368ac10f4ca0d100de5 ]

In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return.

In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free:

BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim]
Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499

CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work [ipv6]
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 print_address_description+0x65/0x380 mm/kasan/report.c:351
 __kasan_report+0x149/0x18d mm/kasan/report.c:482
 kasan_report+0xe/0x20 mm/kasan/common.c:618
 nsim_fib_event_nb+0x342/0x570 [netdevsim]
 notifier_call_chain+0x52/0xf0 kernel/notifier.c:95
 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185
 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30
 call_fib6_entry_notifiers+0xc1/0x100 [ipv6]
 fib6_add+0x92e/0x1b10 [ipv6]
 __ip6_ins_rt+0x40/0x60 [ipv6]
 ip6_ins_rt+0x84/0xb0 [ipv6]
 __ipv6_ifa_notify+0x4b6/0x550 [ipv6]
 ipv6_ifa_notify+0xa5/0x180 [ipv6]
 addrconf_dad_completed+0xca/0x640 [ipv6]
 addrconf_dad_work+0x296/0x960 [ipv6]
 process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269
 worker_thread+0x5c/0x670 kernel/workqueue.c:2415
 kthread+0x1d7/0x200 kernel/kthread.c:255
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Allocated by task 3388:
 save_stack+0x19/0x80 mm/kasan/common.c:69
 set_track mm/kasan/common.c:77 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493
 kmalloc include/linux/slab.h:557 [inline]
 kzalloc include/linux/slab.h:748 [inline]
 ops_init+0xa9/0x220 net/core/net_namespace.c:127
 __register_pernet_operations net/core/net_namespace.c:1135 [inline]
 register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212
 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253
 nsim_fib_init+0x12/0x70 [netdevsim]
 veth_get_link_ksettings+0x2b/0x50 [veth]
 do_one_initcall+0xd4/0x454 init/main.c:939
 do_init_module+0xe0/0x330 kernel/module.c:3490
 load_module+0x3c2f/0x4620 kernel/module.c:3841
 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931
 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3534:
 save_stack+0x19/0x80 mm/kasan/common.c:69
 set_track mm/kasan/common.c:77 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1423 [inline]
 slab_free_freelist_hook mm/slub.c:1474 [inline]
 slab_free mm/slub.c:3016 [inline]
 kfree+0xe9/0x2d0 mm/slub.c:3957
 ops_free net/core/net_namespace.c:151 [inline]
 ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184
 ops_free_list net/core/net_namespace.c:182 [inline]
 __unregister_pernet_operations net/core/net_namespace.c:1165 [inline]
 unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224
 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271
 nsim_fib_exit+0x11/0x20 [netdevsim]
 nsim_module_exit+0x16/0x21 [netdevsim]
 __do_sys_delete_module kernel/module.c:1015 [inline]
 __se_sys_delete_module kernel/module.c:958 [inline]
 __x64_sys_delete_module+0x244/0x330 kernel/module.c:958
 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes 59c84b9fcf42 ("netdevsim: Restore per-network namespace accounting for fib entries")
---
 drivers/net/netdevsim/fib.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/netdevsim/fib.c +2 -1
@@ -241,8 +241,8 @@ static struct pernet_operations nsim_fib
 
 void nsim_fib_exit(void)
 {
-	unregister_pernet_subsys(&nsim_fib_net_ops);
 	unregister_fib_notifier(&nsim_fib_nb);
+	unregister_pernet_subsys(&nsim_fib_net_ops);
 }
 
 int nsim_fib_init(void)
@@ -258,6 +258,7 @@ int nsim_fib_init(void)
 	err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent);
 	if (err < 0) {
 		pr_err("Failed to register fib notifier\n");
+		unregister_pernet_subsys(&nsim_fib_net_ops);
 		goto err_out;
 	}
 
author maintainer
#90 lore raw

PATCH 90/197 net: ethernet: broadcom: have drivers select DIMLIB as needed

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit ddc790e92b3afa4e366ffb41818cfcd19015031e ]

NET_VENDOR_BROADCOM is intended to control a kconfig menu only. It should not have anything to do with code generation. As such, it should not select DIMLIB for all drivers under NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET).

Fixes 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Cc Uwe Kleine-König <[email protected]>
Cc Tal Gilboa <[email protected]>
Cc Saeed Mahameed <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Doug Ledford <[email protected]>
Cc Jason Gunthorpe <[email protected]>
Cc Leon Romanovsky <[email protected]>
Cc Or Gerlitz <[email protected]>
Cc Sagi Grimberg <[email protected]>
---
 drivers/net/ethernet/broadcom/Kconfig |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/Kconfig +3 -1
@@ -8,7 +8,6 @@ config NET_VENDOR_BROADCOM
 	default y
 	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
 		   SIBYTE_SB1xxx_SOC
-	select DIMLIB
 	---help---
 	  If you have a network (Ethernet) chipset belonging to this class,
 	  say Y.
@@ -69,6 +68,7 @@ config BCMGENET
 	select FIXED_PHY
 	select BCM7XXX_PHY
 	select MDIO_BCM_UNIMAC
+	select DIMLIB
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset.
@@ -188,6 +188,7 @@ config SYSTEMPORT
 	select MII
 	select PHYLIB
 	select FIXED_PHY
+	select DIMLIB
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset using an internal
@@ -200,6 +201,7 @@ config BNXT
 	select LIBCRC32C
 	select NET_DEVLINK
 	select PAGE_POOL
+	select DIMLIB
 	---help---
 	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
 	  Ethernet cards.  To compile this driver as a module, choose M here:
author maintainer
#91 lore raw

PATCH 91/197 net: phy: Fix "link partner" information disappear issue

In reply to Greg Kroah-Hartman

From: Yonglong Liu <[email protected]>

[ Upstream commit 3de5ae54712c75cf3c517a288e0a704784ec6cf5 ]

Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear.

The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now.

This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about.

Fixes 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
---
 drivers/net/phy/phy-c45.c    |    2 ++
 drivers/net/phy/phy.c        |    3 ---
 drivers/net/phy/phy_device.c |    9 ++++++++-
 3 files changed, 10 insertions(+), 4 deletions(-)
drivers/net/phy/phy-c45.c +2 -0
@@ -323,6 +323,8 @@ int genphy_c45_read_pma(struct phy_devic
 {
 	int val;
 
+	linkmode_zero(phydev->lp_advertising);
+
 	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
 	if (val < 0)
 		return val;
drivers/net/phy/phy.c +0 -3
@@ -566,9 +566,6 @@ int phy_start_aneg(struct phy_device *ph
 	if (AUTONEG_DISABLE == phydev->autoneg)
 		phy_sanitize_settings(phydev);
 
-	/* Invalidate LP advertising flags */
-	linkmode_zero(phydev->lp_advertising);
-
 	err = phy_config_aneg(phydev);
 	if (err < 0)
 		goto out_unlock;
drivers/net/phy/phy_device.c +8 -1
@@ -1823,7 +1823,14 @@ int genphy_read_status(struct phy_device
 
 	linkmode_zero(phydev->lp_advertising);
 
-	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		if (!phydev->autoneg_complete) {
+			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
+							0);
+			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
+			return 0;
+		}
+
 		if (phydev->is_gigabit_capable) {
 			lpagb = phy_read(phydev, MII_STAT1000);
 			if (lpagb < 0)
author maintainer
#92 lore raw

PATCH 92/197 LSM: SafeSetID: Stop releasing uninitialized ruleset

In reply to Greg Kroah-Hartman

From: Micah Morton <[email protected]>

[ Upstream commit 21ab8580b383f27b7f59b84ac1699cb26d6c3d69 ]

The first time a rule set is configured for SafeSetID, we shouldn't be trying to release the previously configured ruleset, since there isn't one. Currently, the pointer that would point to a previously configured ruleset is uninitialized on first rule set configuration, leading to a crash when we try to call release_ruleset with that pointer.

---
 security/safesetid/securityfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
security/safesetid/securityfs.c +2 -1
index d568e17dd7739..74a13d432ed80 100644
@@ -187,7 +187,8 @@ static ssize_t handle_policy_update(struct file *file,
 out_free_buf:
 	kfree(buf);
 out_free_pol:
-	release_ruleset(pol);
+	if (pol)
+                release_ruleset(pol);
 	return err;
 }
 
Signature · 1 line
2.20.1
author maintainer
#93 lore raw

PATCH 93/197 rxrpc: use rcu protection while reading sk->sk_user_data

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 2ca4f6ca4562594ef161e4140c2a5e0e5282967b ]

We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected.

The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon.

Fixes f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
Fixes 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Cc David Howells <[email protected]>
---
 net/rxrpc/peer_event.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
net/rxrpc/peer_event.c +8 -4
index 61451281d74a3..48f67a9b1037c 100644
@@ -147,13 +147,16 @@ void rxrpc_error_report(struct sock *sk)
 {
 	struct sock_exterr_skb *serr;
 	struct sockaddr_rxrpc srx;
-	struct rxrpc_local *local = sk->sk_user_data;
+	struct rxrpc_local *local;
 	struct rxrpc_peer *peer;
 	struct sk_buff *skb;
 
-	if (unlikely(!local))
+	rcu_read_lock();
+	local = rcu_dereference_sk_user_data(sk);
+	if (unlikely(!local)) {
+		rcu_read_unlock();
 		return;
-
+	}
 	_enter("%p{%d}", sk, local->debug_id);
 
 	/* Clear the outstanding error value on the socket so that it doesn't
@@ -163,6 +166,7 @@ void rxrpc_error_report(struct sock *sk)
 
 	skb = sock_dequeue_err_skb(sk);
 	if (!skb) {
+		rcu_read_unlock();
 		_leave("UDP socket errqueue empty");
 		return;
 	}
@@ -170,11 +174,11 @@ void rxrpc_error_report(struct sock *sk)
 	serr = SKB_EXT_ERR(skb);
 	if (!skb->len && serr->ee.ee_origin == SO_EE_ORIGIN_TIMESTAMPING) {
 		_leave("UDP empty message");
+		rcu_read_unlock();
 		rxrpc_free_skb(skb, rxrpc_skb_freed);
 		return;
 	}
 
-	rcu_read_lock();
 	peer = rxrpc_lookup_peer_icmp_rcu(local, skb, &srx);
 	if (peer && !rxrpc_get_peer_maybe(peer))
 		peer = NULL;
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 94/197 io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD

In reply to Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

commit 2b2ed9750fc9d040b9f6d076afcef6f00b6f1f7c upstream.

We currently assume that submissions from the sqthread are successful, and if IO polling is enabled, we use that value for knowing how many completions to look for. But if we overflowed the CQ ring or some requests simply got errored and already completed, they won't be available for polling.

For the case of IO polling and SQTHREAD usage, look at the pending poll list. If it ever hits empty then we know that we don't have anymore pollable requests inflight. For that case, simply reset the inflight count to zero.

---
 fs/io_uring.c |   44 ++++++++++++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 12 deletions(-)
fs/io_uring.c +32 -12
@@ -816,19 +816,11 @@ static void io_iopoll_reap_events(struct
 	mutex_unlock(&ctx->uring_lock);
 }
 
-static int io_iopoll_check(struct io_ring_ctx *ctx, unsigned *nr_events,
-			   long min)
+static int __io_iopoll_check(struct io_ring_ctx *ctx, unsigned *nr_events,
+			    long min)
 {
-	int iters, ret = 0;
+	int iters = 0, ret = 0;
 
-	/*
-	 * We disallow the app entering submit/complete with polling, but we
-	 * still need to lock the ring to prevent racing with polled issue
-	 * that got punted to a workqueue.
-	 */
-	mutex_lock(&ctx->uring_lock);
-
-	iters = 0;
 	do {
 		int tmin = 0;
 
@@ -864,6 +856,21 @@ static int io_iopoll_check(struct io_rin
 		ret = 0;
 	} while (min && !*nr_events && !need_resched());
 
+	return ret;
+}
+
+static int io_iopoll_check(struct io_ring_ctx *ctx, unsigned *nr_events,
+			   long min)
+{
+	int ret;
+
+	/*
+	 * We disallow the app entering submit/complete with polling, but we
+	 * still need to lock the ring to prevent racing with polled issue
+	 * that got punted to a workqueue.
+	 */
+	mutex_lock(&ctx->uring_lock);
+	ret = __io_iopoll_check(ctx, nr_events, min);
 	mutex_unlock(&ctx->uring_lock);
 	return ret;
 }
@@ -2327,7 +2334,20 @@ static int io_sq_thread(void *data)
 			unsigned nr_events = 0;
 
 			if (ctx->flags & IORING_SETUP_IOPOLL) {
-				io_iopoll_check(ctx, &nr_events, 0);
+				/*
+				 * inflight is the count of the maximum possible
+				 * entries we submitted, but it can be smaller
+				 * if we dropped some of them. If we don't have
+				 * poll entries available, then we know that we
+				 * have nothing left to poll for. Reset the
+				 * inflight count to zero in that case.
+				 */
+				mutex_lock(&ctx->uring_lock);
+				if (!list_empty(&ctx->poll_list))
+					__io_iopoll_check(ctx, &nr_events, 0);
+				else
+					inflight = 0;
+				mutex_unlock(&ctx->uring_lock);
 			} else {
 				/*
 				 * Normal IO, just pretend everything completed.
author maintainer
#95 lore raw

PATCH 95/197 io_uring: Fix corrupted user_data

In reply to Greg Kroah-Hartman

From: Pavel Begunkov <[email protected]>

commit 84d55dc5b9e57b513a702fbc358e1b5489651590 upstream.

There is a bug, where failed linked requests are returned not with specified @user_data, but with garbage from a kernel stack.

The reason is that io_fail_links() uses req->user_data, which is uninitialised when called from io_queue_sqe() on fail path.

---
 fs/io_uring.c |    2 ++
 1 file changed, 2 insertions(+)
fs/io_uring.c +2 -0
@@ -2157,6 +2157,8 @@ err:
 		return;
 	}
 
+	req->user_data = s->sqe->user_data;
+
 	/*
 	 * If we already have a head request, queue this one for async
 	 * submittal once the head completes. If we don't have a head but
author maintainer
#96 lore raw

PATCH 96/197 USB: legousbtower: fix memleak on disconnect

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit b6c03e5f7b463efcafd1ce141bd5a8fc4e583ae2 upstream.

If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data.

---
 drivers/usb/misc/legousbtower.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/usb/misc/legousbtower.c +1 -4
@@ -419,10 +419,7 @@ static int tower_release (struct inode *
 		goto exit;
 	}
 
-	if (mutex_lock_interruptible(&dev->lock)) {
-	        retval = -ERESTARTSYS;
-		goto exit;
-	}
+	mutex_lock(&dev->lock);
 
 	if (dev->open_count != 1) {
 		dev_dbg(&dev->udev->dev, "%s: device not opened exactly once\n",
author maintainer
#97 lore raw

PATCH 97/197 ALSA: hda/realtek - Add support for ALC711

In reply to Greg Kroah-Hartman

From: Kailang Yang <[email protected]>

commit 83629532ce45ef9df1f297b419b9ea112045685d upstream.

Support new codec ALC711.

---
 sound/pci/hda/patch_realtek.c |    3 +++
 1 file changed, 3 insertions(+)
sound/pci/hda/patch_realtek.c +3 -0
@@ -393,6 +393,7 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0700:
 	case 0x10ec0701:
 	case 0x10ec0703:
+	case 0x10ec0711:
 		alc_update_coef_idx(codec, 0x10, 1<<15, 0);
 		break;
 	case 0x10ec0662:
@@ -7965,6 +7966,7 @@ static int patch_alc269(struct hda_codec
 	case 0x10ec0700:
 	case 0x10ec0701:
 	case 0x10ec0703:
+	case 0x10ec0711:
 		spec->codec_variant = ALC269_TYPE_ALC700;
 		spec->gen.mixer_nid = 0; /* ALC700 does not have any loopback mixer path */
 		alc_update_coef_idx(codec, 0x4a, 1 << 15, 0); /* Combo jack auto trigger control */
@@ -9105,6 +9107,7 @@ static const struct hda_device_id snd_hd
 	HDA_CODEC_ENTRY(0x10ec0700, "ALC700", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0701, "ALC701", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0703, "ALC703", patch_alc269),
+	HDA_CODEC_ENTRY(0x10ec0711, "ALC711", patch_alc269),
 	HDA_CODEC_ENTRY(0x10ec0867, "ALC891", patch_alc662),
 	HDA_CODEC_ENTRY(0x10ec0880, "ALC880", patch_alc880),
 	HDA_CODEC_ENTRY(0x10ec0882, "ALC882", patch_alc882),
author maintainer
#98 lore raw

PATCH 98/197 ALSA: hda/realtek - Enable headset mic on Asus MJ401TA

In reply to Greg Kroah-Hartman

From: Daniel Drake <[email protected]>

commit 8c8967a7dc01a25f57a0757fdca10987773cd1f2 upstream.

On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to pin 0x19, with default configuration value 0x411111f0 (indicating no physical connection).

Enable this by quirking the pin. Mic jack detection was also tested and found to be working.

This enables use of the headset mic on this product.

---
 sound/pci/hda/patch_realtek.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
sound/pci/hda/patch_realtek.c +11 -0
@@ -5868,6 +5868,7 @@ enum {
 	ALC225_FIXUP_WYSE_AUTO_MUTE,
 	ALC225_FIXUP_WYSE_DISABLE_MIC_VREF,
 	ALC286_FIXUP_ACER_AIO_HEADSET_MIC,
+	ALC256_FIXUP_ASUS_HEADSET_MIC,
 	ALC256_FIXUP_ASUS_MIC_NO_PRESENCE,
 	ALC299_FIXUP_PREDATOR_SPK,
 	ALC294_FIXUP_ASUS_INTSPK_HEADSET_MIC,
@@ -6902,6 +6903,15 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE
 	},
+	[ALC256_FIXUP_ASUS_HEADSET_MIC] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x03a11020 }, /* headset mic with jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC256_FIXUP_ASUS_HEADSET_MODE
+	},
 	[ALC256_FIXUP_ASUS_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -7098,6 +7108,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
 	SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_INTSPK_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
 	SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC),
author maintainer
#99 lore raw

PATCH 99/197 ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers

In reply to Greg Kroah-Hartman

From: Szabolcs Szőke <[email protected]>

commit 7571b6a17fcc5e4f6903f065a82d0e38011346ed upstream.

BOSS Katana amplifiers cannot be used for recording or playback if quirks are applied

---
 sound/usb/pcm.c |    3 +++
 1 file changed, 3 insertions(+)
sound/usb/pcm.c +3 -0
@@ -348,6 +348,9 @@ static int set_sync_ep_implicit_fb_quirk
 		ep = 0x84;
 		ifnum = 0;
 		goto add_sync_ep_from_ifnum;
+	case USB_ID(0x0582, 0x01d8): /* BOSS Katana */
+		/* BOSS Katana amplifiers do not need quirks */
+		return 0;
 	}
 
 	if (attr == USB_ENDPOINT_SYNC_ASYNC &&
author maintainer
#100 lore raw

PATCH 100/197 ALSA: hda - Force runtime PM on Nvidia HDMI codecs

In reply to Greg Kroah-Hartman

From: Lukas Wunner <[email protected]>

commit 94989e318b2f11e217e86bee058088064fa9a2e9 upstream.

Przemysław Kopa reports that since commit b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his 2011 Samsung laptop refuses to runtime suspend, resulting in a power regression and excessive heat.

Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M) of the same era, as does another Arch Linux user named "R0AR" with a more recent GeForce GTX 1050 Ti (GP107M).

The commit exposes the discrete GPU's HDA controller and all four codecs on the controller do not set the CLKSTOP and EPSS bits in the Supported Power States Response. They also do not set the PS-ClkStopOk bit in the Get Power State Response. hda_codec_runtime_suspend() therefore does not call snd_hdac_codec_link_down(), which prevents each codec and the PCI device from runtime suspending.

The same issue is present on some AMD discrete GPUs and we addressed it by forcing runtime PM despite the bits not being set, see commit 57cb54e53bdd ("ALSA: hda - Force to link down at runtime suspend on ATI/AMD HDMI").

Do the same for Nvidia HDMI codecs.

---
 sound/pci/hda/patch_hdmi.c |    2 ++
 1 file changed, 2 insertions(+)
sound/pci/hda/patch_hdmi.c +2 -0
@@ -3307,6 +3307,8 @@ static int patch_nvhdmi(struct hda_codec
 		nvhdmi_chmap_cea_alloc_validate_get_type;
 	spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate;
 
+	codec->link_down_at_suspend = 1;
+
 	return 0;
 }
 
author maintainer
#101 lore raw

PATCH 101/197 usb: udc: lpc32xx: fix bad bit shift operation

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit b987b66ac3a2bc2f7b03a0ba48a07dc553100c07 upstream.

It seems that the right variable to use in this case is *i*, instead of *n*, otherwise there is an undefined behavior when right shifiting by more than 31 bits when multiplying n by 8; notice that *n* can take values equal or greater than 4 (4, 8, 16, ...).

Also, notice that under the current conditions (bl = 3), we are skiping the handling of bytes 3, 7, 31... So, fix this by updating this logic and limit *bl* up to 4 instead of up to 3.

This fix is based on function udc_stuff_fifo().

Addresses-Coverity-ID: 1454834 ("Bad bit shift operation")

---
 drivers/usb/gadget/udc/lpc32xx_udc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/usb/gadget/udc/lpc32xx_udc.c +3 -3
@@ -1180,11 +1180,11 @@ static void udc_pop_fifo(struct lpc32xx_
 			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
 
 			bl = bytes - n;
-			if (bl > 3)
-				bl = 3;
+			if (bl > 4)
+				bl = 4;
 
 			for (i = 0; i < bl; i++)
-				data[n + i] = (u8) ((tmp >> (n * 8)) & 0xFF);
+				data[n + i] = (u8) ((tmp >> (i * 8)) & 0xFF);
 		}
 		break;
 
author maintainer
#102 lore raw

PATCH 102/197 USB: serial: ti_usb_3410_5052: fix port-close races

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 6f1d1dc8d540a9aa6e39b9cb86d3a67bbc1c8d8d upstream.

Fix races between closing a port and opening or closing another port on the same device which could lead to a failure to start or stop the shared interrupt URB. The latter could potentially cause a use-after-free or worse in the completion handler on driver unbind.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc stable <[email protected]>
---
 drivers/usb/serial/ti_usb_3410_5052.c |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/usb/serial/ti_usb_3410_5052.c +3 -7
@@ -776,7 +776,6 @@ static void ti_close(struct usb_serial_p
 	struct ti_port *tport;
 	int port_number;
 	int status;
-	int do_unlock;
 	unsigned long flags;
 
 	tdev = usb_get_serial_data(port->serial);
@@ -800,16 +799,13 @@ static void ti_close(struct usb_serial_p
 			"%s - cannot send close port command, %d\n"
 							, __func__, status);
 
-	/* if mutex_lock is interrupted, continue anyway */
-	do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
+	mutex_lock(&tdev->td_open_close_lock);
 	--tport->tp_tdev->td_open_port_count;
-	if (tport->tp_tdev->td_open_port_count <= 0) {
+	if (tport->tp_tdev->td_open_port_count == 0) {
 		/* last port is closed, shut down interrupt urb */
 		usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
-		tport->tp_tdev->td_open_port_count = 0;
 	}
-	if (do_unlock)
-		mutex_unlock(&tdev->td_open_close_lock);
+	mutex_unlock(&tdev->td_open_close_lock);
 }
 
 
author maintainer
#103 lore raw

PATCH 103/197 USB: ldusb: fix memleak on disconnect

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit b14a39048c1156cfee76228bf449852da2f14df8 upstream.

If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data.

Fixes 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc stable <[email protected]> # 2.6.13
---
 drivers/usb/misc/ldusb.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/usb/misc/ldusb.c +1 -4
@@ -380,10 +380,7 @@ static int ld_usb_release(struct inode *
 		goto exit;
 	}
 
-	if (mutex_lock_interruptible(&dev->mutex)) {
-		retval = -ERESTARTSYS;
-		goto exit;
-	}
+	mutex_lock(&dev->mutex);
 
 	if (dev->open_count != 1) {
 		retval = -ENODEV;
author maintainer
#104 lore raw

PATCH 104/197 USB: usblp: fix use-after-free on disconnect

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 7a759197974894213621aa65f0571b51904733d6 upstream.

A recent commit addressing a runtime PM use-count regression, introduced a use-after-free by not making sure we held a reference to the struct usb_interface for the lifetime of the driver data.

Fixes 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind")
Cc stable <[email protected]>
Reported-by [email protected]
---
 drivers/usb/class/usblp.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/class/usblp.c +3 -1
@@ -445,6 +445,7 @@ static void usblp_cleanup(struct usblp *
 	kfree(usblp->readbuf);
 	kfree(usblp->device_id_string);
 	kfree(usblp->statusbuf);
+	usb_put_intf(usblp->intf);
 	kfree(usblp);
 }
 
@@ -1107,7 +1108,7 @@ static int usblp_probe(struct usb_interf
 	init_waitqueue_head(&usblp->wwait);
 	init_usb_anchor(&usblp->urbs);
 	usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-	usblp->intf = intf;
+	usblp->intf = usb_get_intf(intf);
 
 	/* Malloc device ID string buffer to the largest expected length,
 	 * since we can re-query it on an ioctl and a dynamic string
@@ -1196,6 +1197,7 @@ abort:
 	kfree(usblp->readbuf);
 	kfree(usblp->statusbuf);
 	kfree(usblp->device_id_string);
+	usb_put_intf(usblp->intf);
 	kfree(usblp);
 abort_ret:
 	return retval;
author maintainer
#105 lore raw

PATCH 105/197 USB: ldusb: fix read info leaks

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 7a6f22d7479b7a0b68eadd308a997dd64dda7dae upstream.

Fix broken read implementation, which could be used to trigger slab info leaks.

The driver failed to check if the custom ring buffer was still empty when waking up after having waited for more data. This would happen on every interrupt-in completion, even if no data had been added to the ring buffer (e.g. on disconnect events).

Due to missing sanity checks and uninitialised (kmalloced) ring-buffer entries, this meant that huge slab info leaks could easily be triggered.

Note that the empty-buffer check after wakeup is enough to fix the info leak on disconnect, but let's clear the buffer on allocation and add a sanity check to read() to prevent further leaks.

Fixes 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc stable <[email protected]> # 2.6.13
Reported-by [email protected]
---
 drivers/usb/misc/ldusb.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
drivers/usb/misc/ldusb.c +11 -7
@@ -464,7 +464,7 @@ static ssize_t ld_usb_read(struct file *
 
 	/* wait for data */
 	spin_lock_irq(&dev->rbsl);
-	if (dev->ring_head == dev->ring_tail) {
+	while (dev->ring_head == dev->ring_tail) {
 		dev->interrupt_in_done = 0;
 		spin_unlock_irq(&dev->rbsl);
 		if (file->f_flags & O_NONBLOCK) {
@@ -474,12 +474,17 @@ static ssize_t ld_usb_read(struct file *
 		retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done);
 		if (retval < 0)
 			goto unlock_exit;
-	} else {
-		spin_unlock_irq(&dev->rbsl);
+
+		spin_lock_irq(&dev->rbsl);
 	}
+	spin_unlock_irq(&dev->rbsl);
 
 	/* actual_buffer contains actual_length + interrupt_in_buffer */
 	actual_buffer = (size_t *)(dev->ring_buffer + dev->ring_tail * (sizeof(size_t)+dev->interrupt_in_endpoint_size));
+	if (*actual_buffer > dev->interrupt_in_endpoint_size) {
+		retval = -EIO;
+		goto unlock_exit;
+	}
 	bytes_to_read = min(count, *actual_buffer);
 	if (bytes_to_read < *actual_buffer)
 		dev_warn(&dev->intf->dev, "Read buffer overflow, %zd bytes dropped\n",
@@ -690,10 +695,9 @@ static int ld_usb_probe(struct usb_inter
 		dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
 
 	dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
-	dev->ring_buffer =
-		kmalloc_array(ring_buffer_size,
-			      sizeof(size_t) + dev->interrupt_in_endpoint_size,
-			      GFP_KERNEL);
+	dev->ring_buffer = kcalloc(ring_buffer_size,
+			sizeof(size_t) + dev->interrupt_in_endpoint_size,
+			GFP_KERNEL);
 	if (!dev->ring_buffer)
 		goto error;
 	dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL);
author maintainer
#106 lore raw

PATCH 106/197 binder: Dont modify VMA bounds in ->mmap handler

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

commit 45d02f79b539073b76077836871de6b674e36eb4 upstream.

binder_mmap() tries to prevent the creation of overly big binder mappings by silently truncating the size of the VMA to 4MiB. However, this violates the API contract of mmap(). If userspace attempts to create a large binder VMA, and later attempts to unmap that VMA, it will call munmap() on a range beyond the end of the VMA, which may have been allocated to another VMA in the meantime. This can lead to userspace memory corruption.

The following sequence of calls leads to a segfault without this commit:

int main(void) {
int binder_fd = open("/dev/binder", O_RDWR);
if (binder_fd == -1) err(1, "open binder");
void *binder_mapping = mmap(NULL, 0x800000UL, PROT_READ, MAP_SHARED,

                              binder_fd, 0);
  if (binder_mapping == MAP_FAILED) err(1, "mmap binder");
  void *data_mapping = mmap(NULL, 0x400000UL, PROT_READ|PROT_WRITE,
                            MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);

if (data_mapping == MAP_FAILED) err(1, "mmap data"); munmap(binder_mapping, 0x800000UL); *(char*)data_mapping = 1;
return 0;
}

---
 drivers/android/binder.c       |    7 -------
 drivers/android/binder_alloc.c |    6 ++++--
 2 files changed, 4 insertions(+), 9 deletions(-)
drivers/android/binder.c +0 -7
@@ -95,10 +95,6 @@ DEFINE_SHOW_ATTRIBUTE(proc);
 #define SZ_1K                               0x400
 #endif
 
-#ifndef SZ_4M
-#define SZ_4M                               0x400000
-#endif
-
 #define FORBIDDEN_MMAP_FLAGS                (VM_WRITE)
 
 enum {
@@ -5195,9 +5191,6 @@ static int binder_mmap(struct file *filp
 	if (proc->tsk != current->group_leader)
 		return -EINVAL;
 
-	if ((vma->vm_end - vma->vm_start) > SZ_4M)
-		vma->vm_end = vma->vm_start + SZ_4M;
-
 	binder_debug(BINDER_DEBUG_OPEN_CLOSE,
 		     "%s: %d %lx-%lx (%ld K) vma %lx pagep %lx\n",
 		     __func__, proc->pid, vma->vm_start, vma->vm_end,
drivers/android/binder_alloc.c +4 -2
@@ -22,6 +22,7 @@
 #include <asm/cacheflush.h>
 #include <linux/uaccess.h>
 #include <linux/highmem.h>
+#include <linux/sizes.h>
 #include "binder_alloc.h"
 #include "binder_trace.h"
 
@@ -689,7 +690,9 @@ int binder_alloc_mmap_handler(struct bin
 	alloc->buffer = (void __user *)vma->vm_start;
 	mutex_unlock(&binder_alloc_mmap_lock);
 
-	alloc->pages = kcalloc((vma->vm_end - vma->vm_start) / PAGE_SIZE,
+	alloc->buffer_size = min_t(unsigned long, vma->vm_end - vma->vm_start,
+				   SZ_4M);
+	alloc->pages = kcalloc(alloc->buffer_size / PAGE_SIZE,
 			       sizeof(alloc->pages[0]),
 			       GFP_KERNEL);
 	if (alloc->pages == NULL) {
@@ -697,7 +700,6 @@ int binder_alloc_mmap_handler(struct bin
 		failure_string = "alloc page array";
 		goto err_alloc_pages_failed;
 	}
-	alloc->buffer_size = vma->vm_end - vma->vm_start;
 
 	buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
 	if (!buffer) {
author maintainer
#107 lore raw

PATCH 107/197 MIPS: tlbex: Fix build_restore_pagemask KScratch restore

In reply to Greg Kroah-Hartman

From: Paul Burton <[email protected]>

commit b42aa3fd5957e4daf4b69129e5ce752a2a53e7d6 upstream.

build_restore_pagemask() will restore the value of register $1/$at when its restore_scratch argument is non-zero, and aims to do so by filling a branch delay slot. Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier) prior to restoring $1 from a KScratch register, in order to resolve a hazard that can result in stale values of the KScratch register being observed. In particular, P-class CPUs from MIPS with out of order execution pipelines such as the P5600 & P6600 are affected.

Unfortunately this EHB instruction was inserted in the branch delay slot causing the MFC0 instruction which performs the restoration to no longer execute along with the branch. The result is that the $1 register isn't actually restored, ie. the TLB refill exception handler clobbers it - which is exactly the problem the EHB is meant to avoid for the P-class CPUs.

Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when its mode argument equals refill_scratch, and suffers from the same problem.

Fix this by in both cases moving the EHB earlier in the emitted code. There's no reason it needs to immediately precede the MFC0 - it simply needs to be between the MTC0 & MFC0.

This bug only affects Cavium Octeon systems which use build_fast_tlb_refill_handler().

Fixes 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
Cc Dmitry Korotin <[email protected]>
Cc [email protected] # v3.15+
---
 arch/mips/mm/tlbex.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)
arch/mips/mm/tlbex.c +15 -8
@@ -655,6 +655,13 @@ static void build_restore_pagemask(u32 *
 				   int restore_scratch)
 {
 	if (restore_scratch) {
+		/*
+		 * Ensure the MFC0 below observes the value written to the
+		 * KScratch register by the prior MTC0.
+		 */
+		if (scratch_reg >= 0)
+			uasm_i_ehb(p);
+
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
 			uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16);
@@ -669,12 +676,10 @@ static void build_restore_pagemask(u32 *
 			uasm_i_mtc0(p, 0, C0_PAGEMASK);
 			uasm_il_b(p, r, lid);
 		}
-		if (scratch_reg >= 0) {
-			uasm_i_ehb(p);
+		if (scratch_reg >= 0)
 			UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-		} else {
+		else
 			UASM_i_LW(p, 1, scratchpad_offset(0), 0);
-		}
 	} else {
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
@@ -923,6 +928,10 @@ build_get_pgd_vmalloc64(u32 **p, struct
 	}
 	if (mode != not_refill && check_for_high_segbits) {
 		uasm_l_large_segbits_fault(l, *p);
+
+		if (mode == refill_scratch && scratch_reg >= 0)
+			uasm_i_ehb(p);
+
 		/*
 		 * We get here if we are an xsseg address, or if we are
 		 * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
@@ -941,12 +950,10 @@ build_get_pgd_vmalloc64(u32 **p, struct
 		uasm_i_jr(p, ptr);
 
 		if (mode == refill_scratch) {
-			if (scratch_reg >= 0) {
-				uasm_i_ehb(p);
+			if (scratch_reg >= 0)
 				UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-			} else {
+			else
 				UASM_i_LW(p, 1, scratchpad_offset(0), 0);
-			}
 		} else {
 			uasm_i_nop(p);
 		}
author maintainer
#108 lore raw

PATCH 108/197 staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

commit 153c5d8191c26165dbbd2646448ca7207f7796d0 upstream.

Currently the exit return path when sme->key_idx >= NUM_WEPKEYS is via label 'exit' and this checks if result is non-zero, however result has not been initialized and contains garbage. Fix this by replacing the goto with a return with the error code.

Addresses-Coverity: ("Uninitialized scalar variable")

Fixes 0ca6d8e74489 ("Staging: wlan-ng: replace switch-case statements with macro")
Cc stable <[email protected]>
---
 drivers/staging/wlan-ng/cfg80211.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/staging/wlan-ng/cfg80211.c +2 -4
@@ -469,10 +469,8 @@ static int prism2_connect(struct wiphy *
 	/* Set the encryption - we only support wep */
 	if (is_wep) {
 		if (sme->key) {
-			if (sme->key_idx >= NUM_WEPKEYS) {
-				err = -EINVAL;
-				goto exit;
-			}
+			if (sme->key_idx >= NUM_WEPKEYS)
+				return -EINVAL;
 
 			result = prism2_domibset_uint32(wlandev,
 				DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
author maintainer
#109 lore raw

PATCH 109/197 scsi: zfcp: fix reaction on bit error threshold notification

In reply to Greg Kroah-Hartman

From: Steffen Maier <[email protected]>

commit 2190168aaea42c31bff7b9a967e7b045f07df095 upstream.

On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior.

User explanation of new kernel message:

* Description:
* The FCP channel reported that its bit error threshold has been exceeded.
* These errors might result from a problem with the physical components
* of the local fibre link into the FCP channel.
* The problem might be damage or malfunction of the cable or
* cable connection between the FCP channel and
* the adjacent fabric switch port or the point-to-point peer.
* Find details about the errors in the HBA trace for the FCP device.
* The zfcp device driver closed down the FCP device
* to limit the performance impact from possible I/O command timeouts.
* User action:
* Check for problems on the local fibre link, ensure that fibre optics are
* clean and functional, and all cables are properly plugged.
* After the repair action, you can manually recover the FCP device by
* writing "0" into its "failed" sysfs attribute.
* If recovery through sysfs is not possible, set the CHPID of the device
* offline and back online on the service element.

---
 drivers/s390/scsi/zfcp_fsf.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/s390/scsi/zfcp_fsf.c +13 -3
@@ -27,6 +27,11 @@
 
 struct kmem_cache *zfcp_fsf_qtcb_cache;
 
+static bool ber_stop = true;
+module_param(ber_stop, bool, 0600);
+MODULE_PARM_DESC(ber_stop,
+		 "Shuts down FCP devices for FCP channels that report a bit-error count in excess of its threshold (default on)");
+
 static void zfcp_fsf_request_timeout_handler(struct timer_list *t)
 {
 	struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer);
@@ -236,10 +241,15 @@ static void zfcp_fsf_status_read_handler
 	case FSF_STATUS_READ_SENSE_DATA_AVAIL:
 		break;
 	case FSF_STATUS_READ_BIT_ERROR_THRESHOLD:
-		dev_warn(&adapter->ccw_device->dev,
-			 "The error threshold for checksum statistics "
-			 "has been exceeded\n");
 		zfcp_dbf_hba_bit_err("fssrh_3", req);
+		if (ber_stop) {
+			dev_warn(&adapter->ccw_device->dev,
+				 "All paths over this FCP device are disused because of excessive bit errors\n");
+			zfcp_erp_adapter_shutdown(adapter, 0, "fssrh_b");
+		} else {
+			dev_warn(&adapter->ccw_device->dev,
+				 "The error threshold for checksum statistics has been exceeded\n");
+		}
 		break;
 	case FSF_STATUS_READ_LINK_DOWN:
 		zfcp_fsf_status_read_link_down(req);
author maintainer
#110 lore raw

PATCH 110/197 scsi: sd: Ignore a failure to sync cache due to lack of authorization

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

commit 21e3d6c81179bbdfa279efc8de456c34b814cfd2 upstream.

I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored.

---
 drivers/scsi/sd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/sd.c +2 -1
@@ -1655,7 +1655,8 @@ static int sd_sync_cache(struct scsi_dis
 		/* we need to evaluate the error return  */
 		if (scsi_sense_valid(sshdr) &&
 			(sshdr->asc == 0x3a ||	/* medium not present */
-			 sshdr->asc == 0x20))	/* invalid command */
+			 sshdr->asc == 0x20 ||	/* invalid command */
+			 (sshdr->asc == 0x74 && sshdr->ascq == 0x71)))	/* drive is password locked */
 				/* this is no error here */
 				return 0;
 
author maintainer
#111 lore raw

PATCH 111/197 scsi: core: save/restore command resid for error handling

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

commit 8f8fed0cdbbd6cdbf28d9ebe662f45765d2f7d39 upstream.

When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried.

Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save.

---
 drivers/scsi/scsi_error.c |    3 +++
 include/scsi/scsi_eh.h    |    1 +
 2 files changed, 4 insertions(+)
drivers/scsi/scsi_error.c +3 -0
@@ -967,6 +967,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd
 	ses->data_direction = scmd->sc_data_direction;
 	ses->sdb = scmd->sdb;
 	ses->result = scmd->result;
+	ses->resid_len = scmd->req.resid_len;
 	ses->underflow = scmd->underflow;
 	ses->prot_op = scmd->prot_op;
 	ses->eh_eflags = scmd->eh_eflags;
@@ -977,6 +978,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd
 	memset(scmd->cmnd, 0, BLK_MAX_CDB);
 	memset(&scmd->sdb, 0, sizeof(scmd->sdb));
 	scmd->result = 0;
+	scmd->req.resid_len = 0;
 
 	if (sense_bytes) {
 		scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
@@ -1029,6 +1031,7 @@ void scsi_eh_restore_cmnd(struct scsi_cm
 	scmd->sc_data_direction = ses->data_direction;
 	scmd->sdb = ses->sdb;
 	scmd->result = ses->result;
+	scmd->req.resid_len = ses->resid_len;
 	scmd->underflow = ses->underflow;
 	scmd->prot_op = ses->prot_op;
 	scmd->eh_eflags = ses->eh_eflags;
include/scsi/scsi_eh.h +1 -0
@@ -32,6 +32,7 @@ extern int scsi_ioctl_reset(struct scsi_
 struct scsi_eh_save {
 	/* saved state */
 	int result;
+	unsigned int resid_len;
 	int eh_eflags;
 	enum dma_data_direction data_direction;
 	unsigned underflow;
author maintainer
#112 lore raw

PATCH 112/197 scsi: core: try to get module before removing device

In reply to Greg Kroah-Hartman

From: Yufen Yu <[email protected]>

commit 77c301287ebae86cc71d03eb3806f271cb14da79 upstream.

We have a test case like block/001 in blktests, which will create a scsi device by loading scsi_debug module and then try to delete the device by sysfs interface. At the same time, it may remove the scsi_debug module.

And getting a invalid paging request BUG_ON as following:

[   34.625854] BUG: unable to handle page fault for address: ffffffffa0016bb8
[   34.629189] Oops: 0000 [#1] SMP PTI
[   34.629618] CPU: 1 PID: 450 Comm: bash Tainted: G        W         5.4.0-rc3+ #473
[   34.632524] RIP: 0010:scsi_proc_hostdir_rm+0x5/0xa0
[   34.643555] CR2: ffffffffa0016bb8 CR3: 000000012cd88000 CR4: 00000000000006e0
[   34.644545] Call Trace:
[   34.644907]  scsi_host_dev_release+0x6b/0x1f0
[   34.645511]  device_release+0x74/0x110
[   34.646046]  kobject_put+0x116/0x390
[   34.646559]  put_device+0x17/0x30
[   34.647041]  scsi_target_dev_release+0x2b/0x40
[   34.647652]  device_release+0x74/0x110
[   34.648186]  kobject_put+0x116/0x390
[   34.648691]  put_device+0x17/0x30
[   34.649157]  scsi_device_dev_release_usercontext+0x2e8/0x360
[   34.649953]  execute_in_process_context+0x29/0x80
[   34.650603]  scsi_device_dev_release+0x20/0x30
[   34.651221]  device_release+0x74/0x110
[   34.651732]  kobject_put+0x116/0x390
[   34.652230]  sysfs_unbreak_active_protection+0x3f/0x50
[   34.652935]  sdev_store_delete.cold.4+0x71/0x8f
[   34.653579]  dev_attr_store+0x1b/0x40
[   34.654103]  sysfs_kf_write+0x3d/0x60
[   34.654603]  kernfs_fop_write+0x174/0x250
[   34.655165]  __vfs_write+0x1f/0x60
[   34.655639]  vfs_write+0xc7/0x280
[   34.656117]  ksys_write+0x6d/0x140
[   34.656591]  __x64_sys_write+0x1e/0x30
[   34.657114]  do_syscall_64+0xb1/0x400
[   34.657627]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   34.658335] RIP: 0033:0x7f156f337130

During deleting scsi target, the scsi_debug module have been removed. Then, sdebug_driver_template belonged to the module cannot be accessd, resulting in scsi_proc_hostdir_rm() BUG_ON.

To fix the bug, we add scsi_device_get() in sdev_store_delete() to try to increase refcount of module, avoiding the module been removed.

---
 drivers/scsi/scsi_sysfs.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/scsi/scsi_sysfs.c +10 -1
@@ -730,6 +730,14 @@ sdev_store_delete(struct device *dev, st
 		  const char *buf, size_t count)
 {
 	struct kernfs_node *kn;
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	/*
+	 * We need to try to get module, avoiding the module been removed
+	 * during delete.
+	 */
+	if (scsi_device_get(sdev))
+		return -ENODEV;
 
 	kn = sysfs_break_active_protection(&dev->kobj, &attr->attr);
 	WARN_ON_ONCE(!kn);
@@ -744,9 +752,10 @@ sdev_store_delete(struct device *dev, st
 	 * state into SDEV_DEL.
 	 */
 	device_remove_file(dev, attr);
-	scsi_remove_device(to_scsi_device(dev));
+	scsi_remove_device(sdev);
 	if (kn)
 		sysfs_unbreak_active_protection(kn);
+	scsi_device_put(sdev);
 	return count;
 };
 static DEVICE_ATTR(delete, S_IWUSR, NULL, sdev_store_delete);
author maintainer
#113 lore raw

PATCH 113/197 scsi: ch: Make it possible to open a ch device multiple times again

In reply to Greg Kroah-Hartman

From: Bart Van Assche <[email protected]>

commit 6a0990eaa768dfb7064f06777743acc6d392084b upstream.

Clearing ch->device in ch_release() is wrong because that pointer must remain valid until ch_remove() is called. This patch fixes the following crash the second time a ch device is opened:

BUG: kernel NULL pointer dereference, address: 0000000000000790
RIP: 0010:scsi_device_get+0x5/0x60
Call Trace:
 ch_open+0x4c/0xa0 [ch]
 chrdev_open+0xa2/0x1c0
 do_dentry_open+0x13a/0x380
 path_openat+0x591/0x1470
 do_filp_open+0x91/0x100
 do_sys_open+0x184/0x220
 do_syscall_64+0x5f/0x1a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
---
 drivers/scsi/ch.c |    1 -
 1 file changed, 1 deletion(-)
drivers/scsi/ch.c +0 -1
@@ -579,7 +579,6 @@ ch_release(struct inode *inode, struct f
 	scsi_changer *ch = file->private_data;
 
 	scsi_device_put(ch->device);
-	ch->device = NULL;
 	file->private_data = NULL;
 	kref_put(&ch->ref, ch_destroy);
 	return 0;
author maintainer
#114 lore raw

PATCH 114/197 Revert "Input: elantech - enable SMBus on new (2018+) systems"

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

commit c324345ce89c3cc50226372960619c7ee940f616 upstream.

This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c.

Apparently use dmi_get_bios_year() as manufacturing date isn't accurate and this breaks older laptops with new BIOS update.

So let's revert this patch.

There are still new HP laptops still need to use SMBus to support all features, but it'll be enabled via a whitelist.

---
 drivers/input/mouse/elantech.c |   55 +++++++++++++++++++++--------------------
 1 file changed, 29 insertions(+), 26 deletions(-)
drivers/input/mouse/elantech.c +29 -26
@@ -1827,31 +1827,6 @@ static int elantech_create_smbus(struct
 				  leave_breadcrumbs);
 }
 
-static bool elantech_use_host_notify(struct psmouse *psmouse,
-				     struct elantech_device_info *info)
-{
-	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
-		return true;
-
-	switch (info->bus) {
-	case ETP_BUS_PS2_ONLY:
-		/* expected case */
-		break;
-	case ETP_BUS_SMB_HST_NTFY_ONLY:
-	case ETP_BUS_PS2_SMB_HST_NTFY:
-		/* SMbus implementation is stable since 2018 */
-		if (dmi_get_bios_year() >= 2018)
-			return true;
-		/* fall through */
-	default:
-		psmouse_dbg(psmouse,
-			    "Ignoring SMBus bus provider %d\n", info->bus);
-		break;
-	}
-
-	return false;
-}
-
 /**
  * elantech_setup_smbus - called once the PS/2 devices are enumerated
  * and decides to instantiate a SMBus InterTouch device.
@@ -1871,7 +1846,7 @@ static int elantech_setup_smbus(struct p
 		 * i2c_blacklist_pnp_ids.
 		 * Old ICs are up to the user to decide.
 		 */
-		if (!elantech_use_host_notify(psmouse, info) ||
+		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
 		    psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
 			return -ENXIO;
 	}
@@ -1891,6 +1866,34 @@ static int elantech_setup_smbus(struct p
 	return 0;
 }
 
+static bool elantech_use_host_notify(struct psmouse *psmouse,
+				     struct elantech_device_info *info)
+{
+	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
+		return true;
+
+	switch (info->bus) {
+	case ETP_BUS_PS2_ONLY:
+		/* expected case */
+		break;
+	case ETP_BUS_SMB_ALERT_ONLY:
+		/* fall-through  */
+	case ETP_BUS_PS2_SMB_ALERT:
+		psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
+		break;
+	case ETP_BUS_SMB_HST_NTFY_ONLY:
+		/* fall-through  */
+	case ETP_BUS_PS2_SMB_HST_NTFY:
+		return true;
+	default:
+		psmouse_dbg(psmouse,
+			    "Ignoring SMBus bus provider %d.\n",
+			    info->bus);
+	}
+
+	return false;
+}
+
 int elantech_init_smbus(struct psmouse *psmouse)
 {
 	struct elantech_device_info info;
author maintainer
#115 lore raw

PATCH 115/197 Input: da9063 - fix capability and drop KEY_SLEEP

In reply to Greg Kroah-Hartman

From: Marco Felsch <[email protected]>

commit afce285b859cea91c182015fc9858ea58c26cd0e upstream.

Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This caused input device to not generate any events if "dlg,disable-key-power" is set.

Fix this by unconditionally setting KEY_POWER capability, and not declaring KEY_SLEEP.

Fixes f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press")
---
 drivers/input/misc/da9063_onkey.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/input/misc/da9063_onkey.c +1 -4
@@ -232,10 +232,7 @@ static int da9063_onkey_probe(struct pla
 	onkey->input->phys = onkey->phys;
 	onkey->input->dev.parent = &pdev->dev;
 
-	if (onkey->key_power)
-		input_set_capability(onkey->input, EV_KEY, KEY_POWER);
-
-	input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
+	input_set_capability(onkey->input, EV_KEY, KEY_POWER);
 
 	INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
 
author maintainer
#116 lore raw

PATCH 116/197 Input: synaptics-rmi4 - avoid processing unknown IRQs

In reply to Greg Kroah-Hartman

From: Evan Green <[email protected]>

commit 363c53875aef8fce69d4a2d0873919ccc7d9e2ad upstream.

rmi_process_interrupt_requests() calls handle_nested_irq() for each interrupt status bit it finds. If the irq domain mapping for this bit had not yet been set up, then it ends up calling handle_nested_irq(0), which causes a NULL pointer dereference.

There's already code that masks the irq_status bits coming out of the hardware with current_irq_mask, presumably to avoid this situation. However current_irq_mask seems to more reflect the actual mask set in the hardware rather than the IRQs software has set up and registered for. For example, in rmi_driver_reset_handler(), the current_irq_mask is initialized based on what is read from the hardware. If the reset value of this mask enables IRQs that Linux has not set up yet, then we end up in this situation.

There appears to be a third unused bitmask that used to serve this purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask to avoid calling handle_nested_irq() on IRQs that have not yet been set up.

---
 drivers/input/rmi4/rmi_driver.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/input/rmi4/rmi_driver.c +5 -1
@@ -146,7 +146,7 @@ static int rmi_process_interrupt_request
 	}
 
 	mutex_lock(&data->irq_mutex);
-	bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
+	bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits,
 	       data->irq_count);
 	/*
 	 * At this point, irq_status has all bits that are set in the
@@ -385,6 +385,8 @@ static int rmi_driver_set_irq_bits(struc
 	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
 		    data->num_of_irq_regs);
 
+	bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count);
+
 error_unlock:
 	mutex_unlock(&data->irq_mutex);
 	return error;
@@ -398,6 +400,8 @@ static int rmi_driver_clear_irq_bits(str
 	struct device *dev = &rmi_dev->dev;
 
 	mutex_lock(&data->irq_mutex);
+	bitmap_andnot(data->fn_irq_bits,
+		      data->fn_irq_bits, mask, data->irq_count);
 	bitmap_andnot(data->new_irq_mask,
 		  data->current_irq_mask, mask, data->irq_count);
 
author maintainer
#117 lore raw

PATCH 117/197 Input: st1232 - fix reporting multitouch coordinates

In reply to Greg Kroah-Hartman

From: Dixit Parmar <[email protected]>

commit b1a402e75a5f5127ff1ffff0615249f98df8b7b3 upstream.

For Sitronix st1633 multi-touch controller driver the coordinates reported for multiple fingers were wrong, as it was always taking LSB of coordinates from the first contact data.

Fixes 351e0592bfea ("Input: st1232 - add support for st1633")

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561

---
 drivers/input/touchscreen/st1232.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/input/touchscreen/st1232.c +4 -2
@@ -81,8 +81,10 @@ static int st1232_ts_read_data(struct st
 	for (i = 0, y = 0; i < ts->chip_info->max_fingers; i++, y += 3) {
 		finger[i].is_valid = buf[i + y] >> 7;
 		if (finger[i].is_valid) {
-			finger[i].x = ((buf[i + y] & 0x0070) << 4) | buf[i + 1];
-			finger[i].y = ((buf[i + y] & 0x0007) << 8) | buf[i + 2];
+			finger[i].x = ((buf[i + y] & 0x0070) << 4) |
+					buf[i + y + 1];
+			finger[i].y = ((buf[i + y] & 0x0007) << 8) |
+					buf[i + y + 2];
 
 			/* st1232 includes a z-axis / touch strength */
 			if (ts->chip_info->have_z)
author maintainer
#118 lore raw

PATCH 118/197 ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting

In reply to Greg Kroah-Hartman

From: Junya Monden <[email protected]>

commit 22e58665a01006d05f0239621f7d41cacca96cc4 upstream.

Unlike other format-related DAI parameters, rdai->bit_clk_inv flag is not properly re-initialized when setting format for new stream processing. The inversion, if requested, is then applied not to default, but to a previous value, which leads to SCKP bit in SSICR register being set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.

Fixes 1a7889ca8aba3 ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc Andrew Gabbasov <[email protected]>
Cc Jiada Wang <[email protected]>
Cc Timo Wischer <[email protected]>
Cc [email protected] # v3.17+
---
 sound/soc/sh/rcar/core.c |    1 +
 1 file changed, 1 insertion(+)
sound/soc/sh/rcar/core.c +1 -0
@@ -761,6 +761,7 @@ static int rsnd_soc_dai_set_fmt(struct s
 	}
 
 	/* set format */
+	rdai->bit_clk_inv = 0;
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		rdai->sys_delay = 0;
author maintainer
#119 lore raw

PATCH 119/197 ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()

In reply to Greg Kroah-Hartman

From: John Garry <[email protected]>

commit 56a0b978d42f58c7e3ba715cf65af487d427524d upstream.

When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning:

[   20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8
[   20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1
[   20.884826]
[   20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289
[   20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[   20.903505] Call trace:
[   20.905942]  dump_backtrace+0x0/0x200
[   20.909593]  show_stack+0x14/0x20
[   20.912899]  dump_stack+0xd4/0x130
[   20.916291]  print_address_description.isra.9+0x6c/0x3b8
[   20.921592]  __kasan_report+0x12c/0x23c
[   20.925417]  kasan_report+0xc/0x18
[   20.928808]  __asan_load4+0x94/0xb8
[   20.932286]  pcc_data_alloc+0x40/0xb8
[   20.935938]  acpi_cppc_processor_probe+0x4e8/0xb08
[   20.940717]  __acpi_processor_start+0x48/0xb0
[   20.945062]  acpi_processor_start+0x40/0x60
[   20.949235]  really_probe+0x118/0x548
[   20.952887]  driver_probe_device+0x7c/0x148
[   20.957059]  device_driver_attach+0x94/0xa0
[   20.961231]  __driver_attach+0xa4/0x110
[   20.965055]  bus_for_each_dev+0xe8/0x158
[   20.968966]  driver_attach+0x30/0x40
[   20.972531]  bus_add_driver+0x234/0x2f0
[   20.976356]  driver_register+0xbc/0x1d0
[   20.980182]  acpi_processor_driver_init+0x40/0xe4
[   20.984875]  do_one_initcall+0xb4/0x254
[   20.988700]  kernel_init_freeable+0x24c/0x2f8
[   20.993047]  kernel_init+0x10/0x118
[   20.996524]  ret_from_fork+0x10/0x18
[   21.000087]
[   21.001567] Allocated by task 1:
[   21.004785]  save_stack+0x28/0xc8
[   21.008089]  __kasan_kmalloc.isra.9+0xbc/0xd8
[   21.012435]  kasan_kmalloc+0xc/0x18
[   21.015913]  pcc_data_alloc+0x94/0xb8
[   21.019564]  acpi_cppc_processor_probe+0x4e8/0xb08
[   21.024343]  __acpi_processor_start+0x48/0xb0
[   21.028689]  acpi_processor_start+0x40/0x60
[   21.032860]  really_probe+0x118/0x548
[   21.036512]  driver_probe_device+0x7c/0x148
[   21.040684]  device_driver_attach+0x94/0xa0
[   21.044855]  __driver_attach+0xa4/0x110
[   21.048680]  bus_for_each_dev+0xe8/0x158
[   21.052591]  driver_attach+0x30/0x40
[   21.056155]  bus_add_driver+0x234/0x2f0
[   21.059980]  driver_register+0xbc/0x1d0
[   21.063805]  acpi_processor_driver_init+0x40/0xe4
[   21.068497]  do_one_initcall+0xb4/0x254
[   21.072322]  kernel_init_freeable+0x24c/0x2f8
[   21.076667]  kernel_init+0x10/0x118
[   21.080144]  ret_from_fork+0x10/0x18
[   21.083707]
[   21.085186] Freed by task 1:
[   21.088056]  save_stack+0x28/0xc8
[   21.091360]  __kasan_slab_free+0x118/0x180
[   21.095445]  kasan_slab_free+0x10/0x18
[   21.099183]  kfree+0x80/0x268
[   21.102139]  acpi_cppc_processor_exit+0x1a8/0x1b8
[   21.106832]  acpi_processor_stop+0x70/0x80
[   21.110917]  really_probe+0x174/0x548
[   21.114568]  driver_probe_device+0x7c/0x148
[   21.118740]  device_driver_attach+0x94/0xa0
[   21.122912]  __driver_attach+0xa4/0x110
[   21.126736]  bus_for_each_dev+0xe8/0x158
[   21.130648]  driver_attach+0x30/0x40
[   21.134212]  bus_add_driver+0x234/0x2f0
[   21.0x10/0x18
[   21.161764]
[   21.163244] The buggy address belongs to the object at ffff00236cdeb600
[   21.163244]  which belongs to the cache kmalloc-256 of size 256
[   21.175750] The buggy address is located 132 bytes inside of
[   21.175750]  256-byte region [ffff00236cdeb600, ffff00236cdeb700)
[   21.187473] The buggy address belongs to the page:
[   21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0
[   21.202331] flags: 0x1ffff00000010200(slab|head)
[   21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00
[   21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000
[   21.222400] page dumped because: kasan: bad access detected
[   21.227959]
[   21.229438] Memory state around the buggy address:
[   21.234218]  ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   21.241427]  ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.255845]                    ^
[   21.259062]  ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   21.266272]  ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.273480] ==================================================================

It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed.

Also remove the useless setting of data "pcc_channel_acquired", which we're about to free.

Fixes 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs")
Cc 4.15+ <[email protected]> # 4.15+
---
 drivers/acpi/cppc_acpi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/cppc_acpi.c +1 -1
@@ -905,8 +905,8 @@ void acpi_cppc_processor_exit(struct acp
 			pcc_data[pcc_ss_id]->refcount--;
 			if (!pcc_data[pcc_ss_id]->refcount) {
 				pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
-				pcc_data[pcc_ss_id]->pcc_channel_acquired = 0;
 				kfree(pcc_data[pcc_ss_id]);
+				pcc_data[pcc_ss_id] = NULL;
 			}
 		}
 	}
author maintainer
#120 lore raw

PATCH 120/197 ACPI: NFIT: Fix unlock on error in scrub_show()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit edffc70f505abdab885f4b4212438b4298dec78f upstream.

We change the locking in this function and forgot to update this error path so we are accidentally still holding the "dev->lockdep_mutex".

Fixes 87a30e1f05d7 ("driver-core, libnvdimm: Let device subsystems add local lockdep coverage")
Cc 5.3+ <[email protected]> # 5.3+
---
 drivers/acpi/nfit/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/nfit/core.c +1 -1
@@ -1322,7 +1322,7 @@ static ssize_t scrub_show(struct device
 	nfit_device_lock(dev);
 	nd_desc = dev_get_drvdata(dev);
 	if (!nd_desc) {
-		device_unlock(dev);
+		nfit_device_unlock(dev);
 		return rc;
 	}
 	acpi_desc = to_acpi_desc(nd_desc);
author maintainer
#121 lore raw

PATCH 121/197 iwlwifi: pcie: change qu with jf devices to use qu configuration

In reply to Greg Kroah-Hartman

From: Luca Coelho <[email protected]>

commit aa0cc7dde17bb6b8cc533bbcfe3f53d70e0dd269 upstream.

There were a bunch of devices with qu and jf that were loading the configuration with pu and jf, which is wrong. Fix them all accordingly. Additionally, remove 0x1010 and 0x1210 subsytem IDs from the list, since they are obviously wrong, and 0x0044 and 0x0244, which were duplicate.

---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c |  274 +++++++++++++-------------
 1 file changed, 137 insertions(+), 137 deletions(-)
drivers/net/wireless/intel/iwlwifi/pcie/drv.c +137 -137
@@ -513,31 +513,33 @@ static const struct pci_device_id iwl_hw
 	{IWL_PCI_DEVICE(0x24FD, 0x9074, iwl8265_2ac_cfg)},
 
 /* 9000 Series */
-	{IWL_PCI_DEVICE(0x02F0, 0x0030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0034, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0038, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x003C, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0060, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0064, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x00A0, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x00A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0230, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0234, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0238, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x023C, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0260, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x0264, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x02A0, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x02A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x1551, iwl9560_killer_s_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x1552, iwl9560_killer_i_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x2030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x2034, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x4030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x4034, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x40A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x4234, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
-	{IWL_PCI_DEVICE(0x02F0, 0x42A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x02F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
 	{IWL_PCI_DEVICE(0x06F0, 0x0030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
 	{IWL_PCI_DEVICE(0x06F0, 0x0034, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)},
 	{IWL_PCI_DEVICE(0x06F0, 0x0038, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)},
@@ -643,34 +645,34 @@ static const struct pci_device_id iwl_hw
 	{IWL_PCI_DEVICE(0x2720, 0x40A4, iwl9462_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x2720, 0x4234, iwl9560_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x2720, 0x42A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0034, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0038, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x003C, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9460_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0064, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x00A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x00A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0230, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0238, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x023C, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0260, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x0264, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x02A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x02A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x1010, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x1210, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0x30DC, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x1552, iwl9560_killer_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x4034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x40A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x4234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x30DC, 0x42A4, iwl9462_2ac_cfg_soc)},
+
+	{IWL_PCI_DEVICE(0x30DC, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x30DC, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
 	{IWL_PCI_DEVICE(0x31DC, 0x0030, iwl9560_2ac_160_cfg_shared_clk)},
 	{IWL_PCI_DEVICE(0x31DC, 0x0034, iwl9560_2ac_cfg_shared_clk)},
 	{IWL_PCI_DEVICE(0x31DC, 0x0038, iwl9560_2ac_160_cfg_shared_clk)},
@@ -726,62 +728,60 @@ static const struct pci_device_id iwl_hw
 	{IWL_PCI_DEVICE(0x34F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
 	{IWL_PCI_DEVICE(0x34F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
 
-	{IWL_PCI_DEVICE(0x3DF0, 0x0030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0034, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0038, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x003C, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0060, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0064, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x00A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x00A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0230, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0238, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x023C, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0260, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x0264, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x02A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x02A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x1010, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x1030, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x1210, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x1552, iwl9560_killer_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x2030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x2034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x4030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x4034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x40A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x4234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x3DF0, 0x42A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0034, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0038, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x003C, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0060, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0064, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x00A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x00A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0230, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0238, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x023C, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0260, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x0264, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x02A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x02A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x1010, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0x43F0, 0x1030, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x1210, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0x43F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x1552, iwl9560_killer_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x2030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x2034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x4030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x4034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x40A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x4234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0x43F0, 0x42A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x3DF0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
+	{IWL_PCI_DEVICE(0x43F0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0x43F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
 	{IWL_PCI_DEVICE(0x9DF0, 0x0000, iwl9460_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x9DF0, 0x0010, iwl9460_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x9DF0, 0x0030, iwl9560_2ac_160_cfg_soc)},
@@ -821,34 +821,34 @@ static const struct pci_device_id iwl_hw
 	{IWL_PCI_DEVICE(0x9DF0, 0x40A4, iwl9462_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x9DF0, 0x4234, iwl9560_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x9DF0, 0x42A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0034, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0038, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x003C, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0060, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0064, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x00A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x00A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0230, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0238, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x023C, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0260, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x0264, iwl9461_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x02A0, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x02A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x1010, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x1030, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x1210, iwl9260_2ac_cfg)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x1552, iwl9560_killer_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x2030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x2034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x4030, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x4034, iwl9560_2ac_160_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x40A4, iwl9462_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x4234, iwl9560_2ac_cfg_soc)},
-	{IWL_PCI_DEVICE(0xA0F0, 0x42A4, iwl9462_2ac_cfg_soc)},
+
+	{IWL_PCI_DEVICE(0xA0F0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+	{IWL_PCI_DEVICE(0xA0F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
 	{IWL_PCI_DEVICE(0xA370, 0x0030, iwl9560_2ac_160_cfg_soc)},
 	{IWL_PCI_DEVICE(0xA370, 0x0034, iwl9560_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0xA370, 0x0038, iwl9560_2ac_160_cfg_soc)},
author maintainer
#122 lore raw

PATCH 122/197 cfg80211: wext: avoid copying malformed SSIDs

In reply to Greg Kroah-Hartman

From: Will Deacon <[email protected]>

commit 4ac2813cc867ae563a1ba5a9414bfb554e5796fa upstream.

Ensure the SSID element is bounds-checked prior to invoking memcpy() with its length field, when copying to userspace.

---
 net/wireless/wext-sme.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/wireless/wext-sme.c +6 -2
@@ -202,6 +202,7 @@ int cfg80211_mgd_wext_giwessid(struct ne
 			       struct iw_point *data, char *ssid)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int ret = 0;
 
 	/* call only for station! */
 	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
@@ -219,7 +220,10 @@ int cfg80211_mgd_wext_giwessid(struct ne
 		if (ie) {
 			data->flags = 1;
 			data->length = ie[1];
-			memcpy(ssid, ie + 2, data->length);
+			if (data->length > IW_ESSID_MAX_SIZE)
+				ret = -EINVAL;
+			else
+				memcpy(ssid, ie + 2, data->length);
 		}
 		rcu_read_unlock();
 	} else if (wdev->wext.connect.ssid && wdev->wext.connect.ssid_len) {
@@ -229,7 +233,7 @@ int cfg80211_mgd_wext_giwessid(struct ne
 	}
 	wdev_unlock(wdev);
 
-	return 0;
+	return ret;
 }
 
 int cfg80211_mgd_wext_siwap(struct net_device *dev,
author maintainer
#123 lore raw

PATCH 123/197 mac80211: Reject malformed SSID elements

In reply to Greg Kroah-Hartman

From: Will Deacon <[email protected]>

commit 4152561f5da3fca92af7179dd538ea89e248f9d0 upstream.

Although this shouldn't occur in practice, it's a good idea to bounds check the length field of the SSID element prior to using it for things like allocations or memcpy operations.

---
 net/mac80211/mlme.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/mac80211/mlme.c +3 -2
@@ -2629,7 +2629,8 @@ struct sk_buff *ieee80211_ap_probereq_ge
 
 	rcu_read_lock();
 	ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
-	if (WARN_ON_ONCE(ssid == NULL))
+	if (WARN_ONCE(!ssid || ssid[1] > IEEE80211_MAX_SSID_LEN,
+		      "invalid SSID element (len=%d)", ssid ? ssid[1] : -1))
 		ssid_len = 0;
 	else
 		ssid_len = ssid[1];
@@ -5227,7 +5228,7 @@ int ieee80211_mgd_assoc(struct ieee80211
 
 	rcu_read_lock();
 	ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
-	if (!ssidie) {
+	if (!ssidie || ssidie[1] > sizeof(assoc_data->ssid)) {
 		rcu_read_unlock();
 		kfree(assoc_data);
 		return -EINVAL;
author maintainer
#124 lore raw

PATCH 124/197 drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

commit 11bcf5f78905b90baae8fb01e16650664ed0cb00 upstream.

Another panel that needs 6BPC quirk.

---
 drivers/gpu/drm/drm_edid.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/drm_edid.c +3 -0
@@ -159,6 +159,9 @@ static const struct edid_quirk {
 	/* Medion MD 30217 PG */
 	{ "MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75 },
 
+	/* Lenovo G50 */
+	{ "SDC", 18514, EDID_QUIRK_FORCE_6BPC },
+
 	/* Panel in Samsung NP700G7A-S01PL notebook reports 6bpc */
 	{ "SEC", 0xd033, EDID_QUIRK_FORCE_8BPC },
 
author maintainer
#125 lore raw

PATCH 125/197 drm/ttm: Restore ttm prefaulting

In reply to Greg Kroah-Hartman

From: Thomas Hellstrom <[email protected]>

commit 941f2f72dbbe0cf8c2d6e0b180a8021a0ec477fa upstream.

Commit 4daa4fba3a38 ("gpu: drm: ttm: Adding new return type vm_fault_t") broke TTM prefaulting. Since vmf_insert_mixed() typically always returns VM_FAULT_NOPAGE, prefaulting stops after the second PTE.

Restore (almost) the original behaviour. Unfortunately we can no longer with the new vm_fault_t return type determine whether a prefaulting PTE insertion hit an already populated PTE, and terminate the insertion loop. Instead we continue with the pre-determined number of prefaults.

Fixes 4daa4fba3a38 ("gpu: drm: ttm: Adding new return type vm_fault_t")
Cc Souptick Joarder <[email protected]>
Cc Christian König <[email protected]>
Cc [email protected] # v4.19+
---
 drivers/gpu/drm/ttm/ttm_bo_vm.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/gpu/drm/ttm/ttm_bo_vm.c +7 -9
@@ -278,15 +278,13 @@ static vm_fault_t ttm_bo_vm_fault(struct
 		else
 			ret = vmf_insert_pfn(&cvma, address, pfn);
 
-		/*
-		 * Somebody beat us to this PTE or prefaulting to
-		 * an already populated PTE, or prefaulting error.
-		 */
-
-		if (unlikely((ret == VM_FAULT_NOPAGE && i > 0)))
-			break;
-		else if (unlikely(ret & VM_FAULT_ERROR))
-			goto out_io_unlock;
+		/* Never error on prefaulted PTEs */
+		if (unlikely((ret & VM_FAULT_ERROR))) {
+			if (i == 0)
+				goto out_io_unlock;
+			else
+				break;
+		}
 
 		address += PAGE_SIZE;
 		if (unlikely(++page_offset >= page_last))
author maintainer
#126 lore raw

PATCH 126/197 drm/panfrost: Handle resetting on timeout better

In reply to Greg Kroah-Hartman

From: Steven Price <[email protected]>

commit 5b3ec8134f5f9fa1ed0a538441a495521078bbee upstream.

Panfrost uses multiple schedulers (one for each slot, so 2 in reality), and on a timeout has to stop all the schedulers to safely perform a reset. However more than one scheduler can trigger a timeout at the same time. This race condition results in jobs being freed while they are still in use.

When stopping other slots use cancel_delayed_work_sync() to ensure that any timeout started for that slot has completed. Also use mutex_trylock() to obtain reset_lock. This means that only one thread attempts the reset, the other threads will simply complete without doing anything (the first thread will wait for this in the call to cancel_delayed_work_sync()).

While we're here and since the function is already dependent on sched_job not being NULL, let's remove the unnecessary checks.

---
 drivers/gpu/drm/panfrost/panfrost_job.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/gpu/drm/panfrost/panfrost_job.c +11 -5
@@ -384,13 +384,19 @@ static void panfrost_job_timedout(struct
 		job_read(pfdev, JS_TAIL_LO(js)),
 		sched_job);
 
-	mutex_lock(&pfdev->reset_lock);
+	if (!mutex_trylock(&pfdev->reset_lock))
+		return;
 
-	for (i = 0; i < NUM_JOB_SLOTS; i++)
-		drm_sched_stop(&pfdev->js->queue[i].sched, sched_job);
+	for (i = 0; i < NUM_JOB_SLOTS; i++) {
+		struct drm_gpu_scheduler *sched = &pfdev->js->queue[i].sched;
 
-	if (sched_job)
-		drm_sched_increase_karma(sched_job);
+		drm_sched_stop(sched, sched_job);
+		if (js != i)
+			/* Ensure any timeouts on other slots have finished */
+			cancel_delayed_work_sync(&sched->work_tdr);
+	}
+
+	drm_sched_increase_karma(sched_job);
 
 	/* panfrost_core_dump(pfdev); */
 
author maintainer
#127 lore raw

PATCH 127/197 drm/amdgpu: Bail earlier when amdgpu.cik_/si_support is not set to 1

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit 984d7a929ad68b7be9990fc9c5cfa5d5c9fc7942 upstream.

Bail from the pci_driver probe function instead of from the drm_driver load function.

This avoid /dev/dri/card0 temporarily getting registered and then unregistered again, sending unwanted add / remove udev events to userspace.

Specifically this avoids triggering the (userspace) bug fixed by this plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59

Note that despite that being a userspace bug, not sending unnecessary udev events is a good idea in general.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c |   35 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c |   35 --------------------------------
 2 files changed, 35 insertions(+), 35 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +35 -0
@@ -1030,6 +1030,41 @@ static int amdgpu_pci_probe(struct pci_d
 		return -ENODEV;
 	}
 
+#ifdef CONFIG_DRM_AMDGPU_SI
+	if (!amdgpu_si_support) {
+		switch (flags & AMD_ASIC_MASK) {
+		case CHIP_TAHITI:
+		case CHIP_PITCAIRN:
+		case CHIP_VERDE:
+		case CHIP_OLAND:
+		case CHIP_HAINAN:
+			dev_info(&pdev->dev,
+				 "SI support provided by radeon.\n");
+			dev_info(&pdev->dev,
+				 "Use radeon.si_support=0 amdgpu.si_support=1 to override.\n"
+				);
+			return -ENODEV;
+		}
+	}
+#endif
+#ifdef CONFIG_DRM_AMDGPU_CIK
+	if (!amdgpu_cik_support) {
+		switch (flags & AMD_ASIC_MASK) {
+		case CHIP_KAVERI:
+		case CHIP_BONAIRE:
+		case CHIP_HAWAII:
+		case CHIP_KABINI:
+		case CHIP_MULLINS:
+			dev_info(&pdev->dev,
+				 "CIK support provided by radeon.\n");
+			dev_info(&pdev->dev,
+				 "Use radeon.cik_support=0 amdgpu.cik_support=1 to override.\n"
+				);
+			return -ENODEV;
+		}
+	}
+#endif
+
 	/* Get rid of things like offb */
 	ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, 0, "amdgpudrmfb");
 	if (ret)
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +0 -35
@@ -144,41 +144,6 @@ int amdgpu_driver_load_kms(struct drm_de
 	struct amdgpu_device *adev;
 	int r, acpi_status;
 
-#ifdef CONFIG_DRM_AMDGPU_SI
-	if (!amdgpu_si_support) {
-		switch (flags & AMD_ASIC_MASK) {
-		case CHIP_TAHITI:
-		case CHIP_PITCAIRN:
-		case CHIP_VERDE:
-		case CHIP_OLAND:
-		case CHIP_HAINAN:
-			dev_info(dev->dev,
-				 "SI support provided by radeon.\n");
-			dev_info(dev->dev,
-				 "Use radeon.si_support=0 amdgpu.si_support=1 to override.\n"
-				);
-			return -ENODEV;
-		}
-	}
-#endif
-#ifdef CONFIG_DRM_AMDGPU_CIK
-	if (!amdgpu_cik_support) {
-		switch (flags & AMD_ASIC_MASK) {
-		case CHIP_KAVERI:
-		case CHIP_BONAIRE:
-		case CHIP_HAWAII:
-		case CHIP_KABINI:
-		case CHIP_MULLINS:
-			dev_info(dev->dev,
-				 "CIK support provided by radeon.\n");
-			dev_info(dev->dev,
-				 "Use radeon.cik_support=0 amdgpu.cik_support=1 to override.\n"
-				);
-			return -ENODEV;
-		}
-	}
-#endif
-
 	adev = kzalloc(sizeof(struct amdgpu_device), GFP_KERNEL);
 	if (adev == NULL) {
 		return -ENOMEM;
author maintainer
#128 lore raw

PATCH 128/197 drm/amdgpu/sdma5: fix mask value of POLL_REGMEM packet for pipe sync

In reply to Greg Kroah-Hartman

From: Xiaojie Yuan <[email protected]>

commit d12c50857c6edc1d18aa7a60c5a4d6d943137bc0 upstream.

sdma will hang once sequence number to be polled reaches 0x1000_0000

---
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c +1 -1
@@ -1086,7 +1086,7 @@ static void sdma_v5_0_ring_emit_pipeline
 	amdgpu_ring_write(ring, addr & 0xfffffffc);
 	amdgpu_ring_write(ring, upper_32_bits(addr) & 0xffffffff);
 	amdgpu_ring_write(ring, seq); /* reference */
-	amdgpu_ring_write(ring, 0xfffffff); /* mask */
+	amdgpu_ring_write(ring, 0xffffffff); /* mask */
 	amdgpu_ring_write(ring, SDMA_PKT_POLL_REGMEM_DW5_RETRY_COUNT(0xfff) |
 			  SDMA_PKT_POLL_REGMEM_DW5_INTERVAL(4)); /* retry count, poll interval */
 }
author maintainer
#129 lore raw

PATCH 129/197 drm/i915/userptr: Never allow userptr into the mappable GGTT

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

commit 4f2a572eda67aecb1e7e4fc26cc985fb8158f6e8 upstream.

Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to invalidate userptr objects which also happen to be pulled into GGTT mmaps. That is when we unbind the userptr object (on mmu invalidation), we revoke all CPU mmaps, which may then recurse into mmu invalidation.

We looked for ways of breaking the cycle, but the revocation on invalidation is required and cannot be avoided. The only solution we could see was to not allow such GGTT bindings of userptr objects in the first place. In practice, no one really wants to use a GGTT mmapping of a CPU pointer...

Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got a genuine blip from CI:

<4>[  246.793958] ======================================================
<4>[  246.793972] WARNING: possible circular locking dependency detected
<4>[  246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G     U
<4>[  246.794003] ------------------------------------------------------
<4>[  246.794017] kswapd0/145 is trying to acquire lock:
<4>[  246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[  246.794250]
                  but task is already holding lock:
<4>[  246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0
<4>[  246.794291]
                  which lock already depends on the new lock.
<4>[  246.794307]
                  the existing dependency chain (in reverse order) is:
<4>[  246.794322]
                  -> #3 (&anon_vma->rwsem){++++}:
<4>[  246.794344]        down_write+0x33/0x70
<4>[  246.794357]        __vma_adjust+0x3d9/0x7b0
<4>[  246.794370]        __split_vma+0x16a/0x180
<4>[  246.794385]        mprotect_fixup+0x2a5/0x320
<4>[  246.794399]        do_mprotect_pkey+0x208/0x2e0
<4>[  246.794413]        __x64_sys_mprotect+0x16/0x20
<4>[  246.794429]        do_syscall_64+0x55/0x1c0
<4>[  246.794443]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794456]
                  -> #2 (&mapping->i_mmap_rwsem){++++}:
<4>[  246.794478]        down_write+0x33/0x70
<4>[  246.794493]        unmap_mapping_pages+0x48/0x130
<4>[  246.794519]        i915_vma_revoke_mmap+0x81/0x1b0 [i915]
<4>[  246.794519]        i915_vma_unbind+0x11d/0x4a0 [i915]
<4>[  246.794519]        i915_vma_destroy+0x31/0x300 [i915]
<4>[  246.794519]        __i915_gem_free_objects+0xb8/0x4b0 [i915]
<4>[  246.794519]        drm_file_free.part.0+0x1e6/0x290
<4>[  246.794519]        drm_release+0xa6/0xe0
<4>[  246.794519]        __fput+0xc2/0x250
<4>[  246.794519]        task_work_run+0x82/0xb0
<4>[  246.794519]        do_exit+0x35b/0xdb0
<4>[  246.794519]        do_group_exit+0x34/0xb0
<4>[  246.794519]        __x64_sys_exit_group+0xf/0x10
<4>[  246.794519]        do_syscall_64+0x55/0x1c0
<4>[  246.794519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794519]
                  -> #1 (&vm->mutex){+.+.}:
<4>[  246.794519]        i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915]
<4>[  246.794519]        i915_address_space_init+0x9f/0x160 [i915]
<4>[  246.794519]        i915_ggtt_init_hw+0x55/0x170 [i915]
<4>[  246.794519]        i915_driver_probe+0xc9f/0x1620 [i915]
<4>[  246.794519]        i915_pci_probe+0x43/0x1b0 [i915]
<4>[  246.794519]        pci_device_probe+0x9e/0x120
<4>[  246.794519]        really_probe+0xea/0x3d0
<4>[  246.794519]        driver_probe_device+0x10b/0x120
<4>[  246.794519]        device_driver_attach+0x4a/0x50
<4>[  246.794519]        __driver_attach+0x97/0x130
<4>[  246.794519]        bus_for_each_dev+0x74/0xc0
<4>[  246.794519]        bus_add_driver+0x13f/0x210
<4>[  246.794519]        driver_register+0x56/0xe0
<4>[  246.794519]        do_one_initcall+0x58/0x300
<4>[  246.794519]        do_init_module+0x56/0x1f6
<4>[  246.794519]        load_module+0x25bd/0x2a40
<4>[  246.794519]        __se_sys_finit_module+0xd3/0xf0
<4>[  246.794519]        do_syscall_64+0x55/0x1c0
<4>[  246.794519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  246.794519]
                  -> #0 (&dev->struct_mutex/1){+.+.}:
<4>[  246.794519]        __lock_acquire+0x15d8/0x1e90
<4>[  246.794519]        lock_acquire+0xa6/0x1c0
<4>[  246.794519]        __mutex_lock+0x9d/0x9b0
<4>[  246.794519]        userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[  246.794519]        __mmu_notifier_invalidate_range_start+0x85/0x110
<4>[  246.794519]        try_to_unmap_one+0x76b/0x860
<4>[  246.794519]        rmap_walk_anon+0x104/0x280
<4>[  246.794519]        try_to_unmap+0xc0/0xf0
<4>[  246.794519]        shrink_page_list+0x561/0xc10
<4>[  246.794519]        shrink_inactive_list+0x220/0x440
<4>[  246.794519]        shrink_node_memcg+0x36e/0x740
<4>[  246.794519]        shrink_node+0xcb/0x490
<4>[  246.794519]        balance_pgdat+0x241/0x580
<4>[  246.794519]        kswapd+0x16c/0x530
<4>[  246.794519]        kthread+0x119/0x130
<4>[  246.794519]        ret_from_fork+0x24/0x50
<4>[  246.794519]
                  other info that might help us debug this:
<4>[  246.794519] Chain exists of:
                    &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem
<4>[  246.794519]  Possible unsafe locking scenario:
<4>[  246.794519]        CPU0                    CPU1
<4>[  246.794519]        ----                    ----
<4>[  246.794519]   lock(&anon_vma->rwsem);
<4>[  246.794519]                                lock(&mapping->i_mmap_rwsem);
<4>[  246.794519]                                lock(&anon_vma->rwsem);
<4>[  246.794519]   lock(&dev->struct_mutex/1);
<4>[  246.794519]
                   *** DEADLOCK ***

v2: Say no to mmap_ioctl

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870

---
 drivers/gpu/drm/i915/gem/i915_gem_mman.c         |    7 +++++++
 drivers/gpu/drm/i915/gem/i915_gem_object.h       |    6 ++++++
 drivers/gpu/drm/i915/gem/i915_gem_object_types.h |    3 ++-
 drivers/gpu/drm/i915/gem/i915_gem_userptr.c      |    1 +
 drivers/gpu/drm/i915/i915_gem.c                  |    3 +++
 5 files changed, 19 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/gem/i915_gem_mman.c +7 -0
@@ -365,6 +365,7 @@ err:
 		return VM_FAULT_OOM;
 	case -ENOSPC:
 	case -EFAULT:
+	case -ENODEV: /* bad object, how did you get here! */
 		return VM_FAULT_SIGBUS;
 	default:
 		WARN_ONCE(ret, "unhandled error in %s: %i\n", __func__, ret);
@@ -475,10 +476,16 @@ i915_gem_mmap_gtt(struct drm_file *file,
 	if (!obj)
 		return -ENOENT;
 
+	if (i915_gem_object_never_bind_ggtt(obj)) {
+		ret = -ENODEV;
+		goto out;
+	}
+
 	ret = create_mmap_offset(obj);
 	if (ret == 0)
 		*offset = drm_vma_node_offset_addr(&obj->base.vma_node);
 
+out:
 	i915_gem_object_put(obj);
 	return ret;
 }
drivers/gpu/drm/i915/gem/i915_gem_object.h +6 -0
@@ -153,6 +153,12 @@ i915_gem_object_is_proxy(const struct dr
 }
 
 static inline bool
+i915_gem_object_never_bind_ggtt(const struct drm_i915_gem_object *obj)
+{
+	return obj->ops->flags & I915_GEM_OBJECT_NO_GGTT;
+}
+
+static inline bool
 i915_gem_object_needs_async_cancel(const struct drm_i915_gem_object *obj)
 {
 	return obj->ops->flags & I915_GEM_OBJECT_ASYNC_CANCEL;
drivers/gpu/drm/i915/gem/i915_gem_object_types.h +2 -1
@@ -31,7 +31,8 @@ struct drm_i915_gem_object_ops {
 #define I915_GEM_OBJECT_HAS_STRUCT_PAGE	BIT(0)
 #define I915_GEM_OBJECT_IS_SHRINKABLE	BIT(1)
 #define I915_GEM_OBJECT_IS_PROXY	BIT(2)
-#define I915_GEM_OBJECT_ASYNC_CANCEL	BIT(3)
+#define I915_GEM_OBJECT_NO_GGTT		BIT(3)
+#define I915_GEM_OBJECT_ASYNC_CANCEL	BIT(4)
 
 	/* Interface between the GEM object and its backing storage.
 	 * get_pages() is called once prior to the use of the associated set
drivers/gpu/drm/i915/gem/i915_gem_userptr.c +1 -0
@@ -694,6 +694,7 @@ i915_gem_userptr_dmabuf_export(struct dr
 static const struct drm_i915_gem_object_ops i915_gem_userptr_ops = {
 	.flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE |
 		 I915_GEM_OBJECT_IS_SHRINKABLE |
+		 I915_GEM_OBJECT_NO_GGTT |
 		 I915_GEM_OBJECT_ASYNC_CANCEL,
 	.get_pages = i915_gem_userptr_get_pages,
 	.put_pages = i915_gem_userptr_put_pages,
drivers/gpu/drm/i915/i915_gem.c +3 -0
@@ -1030,6 +1030,9 @@ i915_gem_object_ggtt_pin(struct drm_i915
 
 	lockdep_assert_held(&obj->base.dev->struct_mutex);
 
+	if (i915_gem_object_never_bind_ggtt(obj))
+		return ERR_PTR(-ENODEV);
+
 	if (flags & PIN_MAPPABLE &&
 	    (!view || view->type == I915_GGTT_VIEW_NORMAL)) {
 		/* If the required space is larger than the available
author maintainer
#130 lore raw

PATCH 130/197 drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pin

In reply to Greg Kroah-Hartman

From: Ville Syrjälä <[email protected]>

commit 0336ab580878f4c5663dfa2b66095821fdc3e588 upstream.

The first come first served apporoach to handling the VBT child device AUX ch conflicts has backfired. We have machines in the wild where the VBT specifies both port A eDP and port E DP (in that order) with port E being the real one.

So let's try to flip the preference around and let the last child device win once again.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966

Fixes 36a0f92020dc ("drm/i915/bios: make child device order the priority order")
(cherry picked from commit 41e35ffb380bde1379e4030bb5b2ac824d5139cf)
---
 drivers/gpu/drm/i915/display/intel_bios.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_bios.c +16 -6
@@ -1269,7 +1269,7 @@ static void sanitize_ddc_pin(struct drm_
 		DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, "
 			      "disabling port %c DVI/HDMI support\n",
 			      port_name(port), info->alternate_ddc_pin,
-			      port_name(p), port_name(port));
+			      port_name(p), port_name(p));
 
 		/*
 		 * If we have multiple ports supposedly sharing the
@@ -1277,9 +1277,14 @@ static void sanitize_ddc_pin(struct drm_
 		 * port. Otherwise they share the same ddc bin and
 		 * system couldn't communicate with them separately.
 		 *
-		 * Give child device order the priority, first come first
-		 * served.
+		 * Give inverse child device order the priority,
+		 * last one wins. Yes, there are real machines
+		 * (eg. Asrock B250M-HDV) where VBT has both
+		 * port A and port E with the same AUX ch and
+		 * we must pick port E :(
 		 */
+		info = &dev_priv->vbt.ddi_port_info[p];
+
 		info->supports_dvi = false;
 		info->supports_hdmi = false;
 		info->alternate_ddc_pin = 0;
@@ -1315,7 +1320,7 @@ static void sanitize_aux_ch(struct drm_i
 		DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, "
 			      "disabling port %c DP support\n",
 			      port_name(port), info->alternate_aux_channel,
-			      port_name(p), port_name(port));
+			      port_name(p), port_name(p));
 
 		/*
 		 * If we have multiple ports supposedlt sharing the
@@ -1323,9 +1328,14 @@ static void sanitize_aux_ch(struct drm_i
 		 * port. Otherwise they share the same aux channel
 		 * and system couldn't communicate with them separately.
 		 *
-		 * Give child device order the priority, first come first
-		 * served.
+		 * Give inverse child device order the priority,
+		 * last one wins. Yes, there are real machines
+		 * (eg. Asrock B250M-HDV) where VBT has both
+		 * port A and port E with the same AUX ch and
+		 * we must pick port E :(
 		 */
+		info = &dev_priv->vbt.ddi_port_info[p];
+
 		info->supports_dp = false;
 		info->alternate_aux_channel = 0;
 	}
author maintainer
#131 lore raw

PATCH 131/197 drm/amdgpu/vce: fix allocation size in enc ring test

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit ee027828c40faa92a7ef4c2b0641bbb3f4be95d3 upstream.

We need to allocate a large enough buffer for the feedback buffer, otherwise the IB test can overwrite other memory.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c |   20 +++++++++++++++-----
 drivers/gpu/drm/amd/amdgpu/amdgpu_vce.h |    1 +
 2 files changed, 16 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +15 -5
@@ -429,13 +429,14 @@ void amdgpu_vce_free_handles(struct amdg
  * Open up a stream for HW test
  */
 int amdgpu_vce_get_create_msg(struct amdgpu_ring *ring, uint32_t handle,
+			      struct amdgpu_bo *bo,
 			      struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 1024;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -444,7 +445,7 @@ int amdgpu_vce_get_create_msg(struct amd
 
 	ib = &job->ibs[0];
 
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	/* stitch together an VCE create msg */
 	ib->length_dw = 0;
@@ -476,8 +477,8 @@ int amdgpu_vce_get_create_msg(struct amd
 
 	ib->ptr[ib->length_dw++] = 0x00000014; /* len */
 	ib->ptr[ib->length_dw++] = 0x05000005; /* feedback buffer */
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 	ib->ptr[ib->length_dw++] = 0x00000001;
 
 	for (i = ib->length_dw; i < ib_size_dw; ++i)
@@ -1110,13 +1111,20 @@ int amdgpu_vce_ring_test_ring(struct amd
 int amdgpu_vce_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 {
 	struct dma_fence *fence = NULL;
+	struct amdgpu_bo *bo = NULL;
 	long r;
 
 	/* skip vce ring1/2 ib test for now, since it's not reliable */
 	if (ring != &ring->adev->vce.ring[0])
 		return 0;
 
-	r = amdgpu_vce_get_create_msg(ring, 1, NULL);
+	r = amdgpu_bo_create_reserved(ring->adev, 512, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &bo, NULL, NULL);
+	if (r)
+		return r;
+
+	r = amdgpu_vce_get_create_msg(ring, 1, bo, NULL);
 	if (r)
 		goto error;
 
@@ -1132,5 +1140,7 @@ int amdgpu_vce_ring_test_ib(struct amdgp
 
 error:
 	dma_fence_put(fence);
+	amdgpu_bo_unreserve(bo);
+	amdgpu_bo_unref(&bo);
 	return r;
 }
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.h +1 -0
@@ -59,6 +59,7 @@ int amdgpu_vce_entity_init(struct amdgpu
 int amdgpu_vce_suspend(struct amdgpu_device *adev);
 int amdgpu_vce_resume(struct amdgpu_device *adev);
 int amdgpu_vce_get_create_msg(struct amdgpu_ring *ring, uint32_t handle,
+			      struct amdgpu_bo *bo,
 			      struct dma_fence **fence);
 int amdgpu_vce_get_destroy_msg(struct amdgpu_ring *ring, uint32_t handle,
 			       bool direct, struct dma_fence **fence);
author maintainer
#132 lore raw

PATCH 132/197 drm/amdgpu/vcn: fix allocation size in enc ring test

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit c81fffc2c9450750dd7a54a36a788a860ab0425d upstream.

We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory.

- Session info is 128K according to mesa
- Use the same session info for create and destroy

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c |   35 +++++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 12 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +23 -12
@@ -517,13 +517,14 @@ int amdgpu_vcn_enc_ring_test_ring(struct
 }
 
 static int amdgpu_vcn_enc_get_create_msg(struct amdgpu_ring *ring, uint32_t handle,
-			      struct dma_fence **fence)
+					 struct amdgpu_bo *bo,
+					 struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 16;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -531,14 +532,14 @@ static int amdgpu_vcn_enc_get_create_msg
 		return r;
 
 	ib = &job->ibs[0];
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	ib->length_dw = 0;
 	ib->ptr[ib->length_dw++] = 0x00000018;
 	ib->ptr[ib->length_dw++] = 0x00000001; /* session info */
 	ib->ptr[ib->length_dw++] = handle;
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 	ib->ptr[ib->length_dw++] = 0x0000000b;
 
 	ib->ptr[ib->length_dw++] = 0x00000014;
@@ -569,13 +570,14 @@ err:
 }
 
 static int amdgpu_vcn_enc_get_destroy_msg(struct amdgpu_ring *ring, uint32_t handle,
-				struct dma_fence **fence)
+					  struct amdgpu_bo *bo,
+					  struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 16;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -583,14 +585,14 @@ static int amdgpu_vcn_enc_get_destroy_ms
 		return r;
 
 	ib = &job->ibs[0];
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	ib->length_dw = 0;
 	ib->ptr[ib->length_dw++] = 0x00000018;
 	ib->ptr[ib->length_dw++] = 0x00000001;
 	ib->ptr[ib->length_dw++] = handle;
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 	ib->ptr[ib->length_dw++] = 0x0000000b;
 
 	ib->ptr[ib->length_dw++] = 0x00000014;
@@ -623,13 +625,20 @@ err:
 int amdgpu_vcn_enc_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 {
 	struct dma_fence *fence = NULL;
+	struct amdgpu_bo *bo = NULL;
 	long r;
 
-	r = amdgpu_vcn_enc_get_create_msg(ring, 1, NULL);
+	r = amdgpu_bo_create_reserved(ring->adev, 128 * 1024, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &bo, NULL, NULL);
+	if (r)
+		return r;
+
+	r = amdgpu_vcn_enc_get_create_msg(ring, 1, bo, NULL);
 	if (r)
 		goto error;
 
-	r = amdgpu_vcn_enc_get_destroy_msg(ring, 1, &fence);
+	r = amdgpu_vcn_enc_get_destroy_msg(ring, 1, bo, &fence);
 	if (r)
 		goto error;
 
@@ -641,6 +650,8 @@ int amdgpu_vcn_enc_ring_test_ib(struct a
 
 error:
 	dma_fence_put(fence);
+	amdgpu_bo_unreserve(bo);
+	amdgpu_bo_unref(&bo);
 	return r;
 }
 
author maintainer
#133 lore raw

PATCH 133/197 drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit ce584a8e2885c7b59dfacba42db39761243cacb2 upstream.

We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory.

v2: - session info is 128K according to mesa
- use the same session info for create and destroy

---
 drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c |   31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c +21 -10
@@ -206,13 +206,14 @@ static int uvd_v6_0_enc_ring_test_ring(s
  * Open up a stream for HW test
  */
 static int uvd_v6_0_enc_get_create_msg(struct amdgpu_ring *ring, uint32_t handle,
+				       struct amdgpu_bo *bo,
 				       struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 16;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -220,15 +221,15 @@ static int uvd_v6_0_enc_get_create_msg(s
 		return r;
 
 	ib = &job->ibs[0];
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	ib->length_dw = 0;
 	ib->ptr[ib->length_dw++] = 0x00000018;
 	ib->ptr[ib->length_dw++] = 0x00000001; /* session info */
 	ib->ptr[ib->length_dw++] = handle;
 	ib->ptr[ib->length_dw++] = 0x00010000;
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 
 	ib->ptr[ib->length_dw++] = 0x00000014;
 	ib->ptr[ib->length_dw++] = 0x00000002; /* task info */
@@ -268,13 +269,14 @@ err:
  */
 static int uvd_v6_0_enc_get_destroy_msg(struct amdgpu_ring *ring,
 					uint32_t handle,
+					struct amdgpu_bo *bo,
 					struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 16;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -282,15 +284,15 @@ static int uvd_v6_0_enc_get_destroy_msg(
 		return r;
 
 	ib = &job->ibs[0];
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	ib->length_dw = 0;
 	ib->ptr[ib->length_dw++] = 0x00000018;
 	ib->ptr[ib->length_dw++] = 0x00000001; /* session info */
 	ib->ptr[ib->length_dw++] = handle;
 	ib->ptr[ib->length_dw++] = 0x00010000;
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 
 	ib->ptr[ib->length_dw++] = 0x00000014;
 	ib->ptr[ib->length_dw++] = 0x00000002; /* task info */
@@ -327,13 +329,20 @@ err:
 static int uvd_v6_0_enc_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 {
 	struct dma_fence *fence = NULL;
+	struct amdgpu_bo *bo = NULL;
 	long r;
 
-	r = uvd_v6_0_enc_get_create_msg(ring, 1, NULL);
+	r = amdgpu_bo_create_reserved(ring->adev, 128 * 1024, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &bo, NULL, NULL);
+	if (r)
+		return r;
+
+	r = uvd_v6_0_enc_get_create_msg(ring, 1, bo, NULL);
 	if (r)
 		goto error;
 
-	r = uvd_v6_0_enc_get_destroy_msg(ring, 1, &fence);
+	r = uvd_v6_0_enc_get_destroy_msg(ring, 1, bo, &fence);
 	if (r)
 		goto error;
 
@@ -345,6 +354,8 @@ static int uvd_v6_0_enc_ring_test_ib(str
 
 error:
 	dma_fence_put(fence);
+	amdgpu_bo_unreserve(bo);
+	amdgpu_bo_unref(&bo);
 	return r;
 }
 
author maintainer
#134 lore raw

PATCH 134/197 drm/amdgpu/uvd7: fix allocation size in enc ring test (v2)

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit 5d230bc91f6c15e5d281f2851502918d98b9e770 upstream.

We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory.

v2: - session info is 128K according to mesa
- use the same session info for create and destroy

---
 drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c |   33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/amdgpu/uvd_v7_0.c +22 -11
@@ -214,13 +214,14 @@ static int uvd_v7_0_enc_ring_test_ring(s
  * Open up a stream for HW test
  */
 static int uvd_v7_0_enc_get_create_msg(struct amdgpu_ring *ring, uint32_t handle,
+				       struct amdgpu_bo *bo,
 				       struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 16;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -228,15 +229,15 @@ static int uvd_v7_0_enc_get_create_msg(s
 		return r;
 
 	ib = &job->ibs[0];
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	ib->length_dw = 0;
 	ib->ptr[ib->length_dw++] = 0x00000018;
 	ib->ptr[ib->length_dw++] = 0x00000001; /* session info */
 	ib->ptr[ib->length_dw++] = handle;
 	ib->ptr[ib->length_dw++] = 0x00000000;
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 
 	ib->ptr[ib->length_dw++] = 0x00000014;
 	ib->ptr[ib->length_dw++] = 0x00000002; /* task info */
@@ -275,13 +276,14 @@ err:
  * Close up a stream for HW test or if userspace failed to do so
  */
 static int uvd_v7_0_enc_get_destroy_msg(struct amdgpu_ring *ring, uint32_t handle,
-				struct dma_fence **fence)
+					struct amdgpu_bo *bo,
+					struct dma_fence **fence)
 {
 	const unsigned ib_size_dw = 16;
 	struct amdgpu_job *job;
 	struct amdgpu_ib *ib;
 	struct dma_fence *f = NULL;
-	uint64_t dummy;
+	uint64_t addr;
 	int i, r;
 
 	r = amdgpu_job_alloc_with_ib(ring->adev, ib_size_dw * 4, &job);
@@ -289,15 +291,15 @@ static int uvd_v7_0_enc_get_destroy_msg(
 		return r;
 
 	ib = &job->ibs[0];
-	dummy = ib->gpu_addr + 1024;
+	addr = amdgpu_bo_gpu_offset(bo);
 
 	ib->length_dw = 0;
 	ib->ptr[ib->length_dw++] = 0x00000018;
 	ib->ptr[ib->length_dw++] = 0x00000001;
 	ib->ptr[ib->length_dw++] = handle;
 	ib->ptr[ib->length_dw++] = 0x00000000;
-	ib->ptr[ib->length_dw++] = upper_32_bits(dummy);
-	ib->ptr[ib->length_dw++] = dummy;
+	ib->ptr[ib->length_dw++] = upper_32_bits(addr);
+	ib->ptr[ib->length_dw++] = addr;
 
 	ib->ptr[ib->length_dw++] = 0x00000014;
 	ib->ptr[ib->length_dw++] = 0x00000002;
@@ -334,13 +336,20 @@ err:
 static int uvd_v7_0_enc_ring_test_ib(struct amdgpu_ring *ring, long timeout)
 {
 	struct dma_fence *fence = NULL;
+	struct amdgpu_bo *bo = NULL;
 	long r;
 
-	r = uvd_v7_0_enc_get_create_msg(ring, 1, NULL);
+	r = amdgpu_bo_create_reserved(ring->adev, 128 * 1024, PAGE_SIZE,
+				      AMDGPU_GEM_DOMAIN_VRAM,
+				      &bo, NULL, NULL);
+	if (r)
+		return r;
+
+	r = uvd_v7_0_enc_get_create_msg(ring, 1, bo, NULL);
 	if (r)
 		goto error;
 
-	r = uvd_v7_0_enc_get_destroy_msg(ring, 1, &fence);
+	r = uvd_v7_0_enc_get_destroy_msg(ring, 1, bo, &fence);
 	if (r)
 		goto error;
 
@@ -352,6 +361,8 @@ static int uvd_v7_0_enc_ring_test_ib(str
 
 error:
 	dma_fence_put(fence);
+	amdgpu_bo_unreserve(bo);
+	amdgpu_bo_unref(&bo);
 	return r;
 }
 
author maintainer
#135 lore raw

PATCH 135/197 drm/amdgpu: user pages array memory leak fix

In reply to Greg Kroah-Hartman

From: Philip Yang <[email protected]>

commit 209620b422945ee03cebb03f726e706d537b692d upstream.

user_pages array should always be freed after validation regardless if user pages are changed after bo is created because with HMM change parse bo always allocate user pages array to get user pages for userptr bo.

v2: remove unused local variable and amend commit

v3: add back get user pages in gem_userptr_ioctl, to detect application bug where an userptr VMA is not ananymous memory and reject it.

Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1844962

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +2 -6
@@ -536,7 +536,6 @@ static int amdgpu_cs_list_validate(struc
 
 	list_for_each_entry(lobj, validated, tv.head) {
 		struct amdgpu_bo *bo = ttm_to_amdgpu_bo(lobj->tv.bo);
-		bool binding_userptr = false;
 		struct mm_struct *usermm;
 
 		usermm = amdgpu_ttm_tt_get_usermm(bo->tbo.ttm);
@@ -553,7 +552,6 @@ static int amdgpu_cs_list_validate(struc
 
 			amdgpu_ttm_tt_set_user_pages(bo->tbo.ttm,
 						     lobj->user_pages);
-			binding_userptr = true;
 		}
 
 		if (p->evictable == lobj)
@@ -563,10 +561,8 @@ static int amdgpu_cs_list_validate(struc
 		if (r)
 			return r;
 
-		if (binding_userptr) {
-			kvfree(lobj->user_pages);
-			lobj->user_pages = NULL;
-		}
+		kvfree(lobj->user_pages);
+		lobj->user_pages = NULL;
 	}
 	return 0;
 }
author maintainer
#136 lore raw

PATCH 136/197 drivers/base/memory.c: dont access uninitialized memmaps in soft_offline_page_store()

In reply to Greg Kroah-Hartman

From: David Hildenbrand <[email protected]>

commit 641fe2e9387a36f9ee01d7c69382d1fe147a5e98 upstream.

Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched.

Right now, when trying to soft-offline a PFN that resides on a memory block that was never onlined, one gets a misleading error with CONFIG_PAGE_POISONING:

  :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page
  [   23.097167] soft offline: 0x150000 page already poisoned

But the actual result depends on the garbage in the memmap.

soft_offline_page() can only work with online pages, it returns -EIO in case of ZONE_DEVICE. Make sure to only forward pages that are online (iow, managed by the buddy) and, therefore, have an initialized memmap.

Add a check against pfn_to_online_page() and similarly return -EIO.

Fixes f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Cc Greg Kroah-Hartman <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc <[email protected]> [4.13+]
---
 drivers/base/memory.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/base/memory.c +3 -0
@@ -554,6 +554,9 @@ static ssize_t soft_offline_page_store(s
 	pfn >>= PAGE_SHIFT;
 	if (!pfn_valid(pfn))
 		return -ENXIO;
+	/* Only online pages can be soft-offlined (esp., not ZONE_DEVICE). */
+	if (!pfn_to_online_page(pfn))
+		return -EIO;
 	ret = soft_offline_page(pfn_to_page(pfn), 0);
 	return ret == 0 ? count : ret;
 }
author maintainer
#137 lore raw

PATCH 137/197 fs/proc/page.c: dont access uninitialized memmaps in fs/proc/page.c

In reply to Greg Kroah-Hartman

From: David Hildenbrand <[email protected]>

commit aad5f69bc161af489dbb5934868bd347282f0764 upstream.

There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup

We have initialized memmaps either when the section is online or when the page was initialized to the ZONE_DEVICE. Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING.

For example, not onlining a DIMM during boot and calling /proc/kpagecount with CONFIG_PAGE_POISONING:

  :/# cat /proc/kpagecount > tmp.test
  BUG: unable to handle page fault for address: fffffffffffffffe
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 114616067 P4D 114616067 PUD 114618067 PMD 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
  RIP: 0010:kpagecount_read+0xce/0x1e0
  Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
  RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000
  RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
  R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08
  FS:  00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0
  Call Trace:
   proc_reg_read+0x3c/0x60
   vfs_read+0xc5/0x180
   ksys_read+0x68/0xe0
   do_syscall_64+0x5c/0xa0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

For now, let's drop support for ZONE_DEVICE from the three pseudo files in order to fix this. To distinguish offline memory (with garbage memmap) from ZONE_DEVICE memory with properly initialized memmaps, we would have to check get_dev_pagemap() and pfn_zone_device_reserved() right now. The usage of both (especially, special casing devmem) is frowned upon and needs to be reworked.

The fundamental issue we have is:

	if (pfn_to_online_page(pfn)) {
		/* memmap initialized */
	} else if (pfn_valid(pfn)) {
		/*
		 * ???
		 * a) offline memory. memmap garbage.
		 * b) devmem: memmap initialized to ZONE_DEVICE.
		 * c) devmem: reserved for driver. memmap garbage.
		 * (d) devmem: memmap currently initializing - garbage)
		 */
	}

We'll leave the pfn_zone_device_reserved() check in stable_page_flags() in place as that function is also used from memory failure. We now no longer dump information about pages that are not in use anymore - offline.

Fixes f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Cc Dan Williams <[email protected]>
Cc Alexey Dobriyan <[email protected]>
Cc Stephen Rothwell <[email protected]>
Cc Toshiki Fukasawa <[email protected]>
Cc Pankaj gupta <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Anthony Yznaga <[email protected]>
Cc "Aneesh Kumar K.V" <[email protected]>
Cc <[email protected]> [4.13+]
---
 fs/proc/page.c |   28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)
fs/proc/page.c +16 -12
@@ -42,10 +42,12 @@ static ssize_t kpagecount_read(struct fi
 		return -EINVAL;
 
 	while (count > 0) {
-		if (pfn_valid(pfn))
-			ppage = pfn_to_page(pfn);
-		else
-			ppage = NULL;
+		/*
+		 * TODO: ZONE_DEVICE support requires to identify
+		 * memmaps that were actually initialized.
+		 */
+		ppage = pfn_to_online_page(pfn);
+
 		if (!ppage || PageSlab(ppage) || page_has_type(ppage))
 			pcount = 0;
 		else
@@ -216,10 +218,11 @@ static ssize_t kpageflags_read(struct fi
 		return -EINVAL;
 
 	while (count > 0) {
-		if (pfn_valid(pfn))
-			ppage = pfn_to_page(pfn);
-		else
-			ppage = NULL;
+		/*
+		 * TODO: ZONE_DEVICE support requires to identify
+		 * memmaps that were actually initialized.
+		 */
+		ppage = pfn_to_online_page(pfn);
 
 		if (put_user(stable_page_flags(ppage), out)) {
 			ret = -EFAULT;
@@ -261,10 +264,11 @@ static ssize_t kpagecgroup_read(struct f
 		return -EINVAL;
 
 	while (count > 0) {
-		if (pfn_valid(pfn))
-			ppage = pfn_to_page(pfn);
-		else
-			ppage = NULL;
+		/*
+		 * TODO: ZONE_DEVICE support requires to identify
+		 * memmaps that were actually initialized.
+		 */
+		ppage = pfn_to_online_page(pfn);
 
 		if (ppage)
 			ino = page_cgroup_ino(ppage);
author maintainer
#138 lore raw

PATCH 138/197 io_uring: Fix broken links with offloading

In reply to Greg Kroah-Hartman

From: Pavel Begunkov <[email protected]>

[ Upstream commit fb5ccc98782f654778cb8d96ba8a998304f9a51f ]

io_sq_thread() processes sqes by 8 without considering links. As a result, links will be randomely subdivided.

The easiest way to fix it is to call io_get_sqring() inside io_submit_sqes() as do io_ring_submit().

Downsides:
1. This removes optimisation of not grabbing mm_struct for fixed files
2. It submitting all sqes in one go, without finer-grained sheduling with cq processing.

---
 fs/io_uring.c | 58 +++++++++++++++++++++++++++------------------------
 1 file changed, 31 insertions(+), 27 deletions(-)
fs/io_uring.c +31 -27
index 79f9c9f7b298e..518042cc6628b 100644
@@ -687,6 +687,14 @@ static unsigned io_cqring_events(struct io_cq_ring *ring)
 	return READ_ONCE(ring->r.tail) - READ_ONCE(ring->r.head);
 }
 
+static inline unsigned int io_sqring_entries(struct io_ring_ctx *ctx)
+{
+	struct io_sq_ring *ring = ctx->sq_ring;
+
+	/* make sure SQ entry isn't read before tail */
+	return smp_load_acquire(&ring->r.tail) - ctx->cached_sq_head;
+}
+
 /*
  * Find and free completed poll iocbs
  */
@@ -2268,8 +2276,8 @@ static bool io_get_sqring(struct io_ring_ctx *ctx, struct sqe_submit *s)
 	return false;
 }
 
-static int io_submit_sqes(struct io_ring_ctx *ctx, struct sqe_submit *sqes,
-			  unsigned int nr, bool has_user, bool mm_fault)
+static int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr,
+			  bool has_user, bool mm_fault)
 {
 	struct io_submit_state state, *statep = NULL;
 	struct io_kiocb *link = NULL;
@@ -2282,6 +2290,11 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, struct sqe_submit *sqes,
 	}
 
 	for (i = 0; i < nr; i++) {
+		struct sqe_submit s;
+
+		if (!io_get_sqring(ctx, &s))
+			break;
+
 		/*
 		 * If previous wasn't linked and we have a linked command,
 		 * that's the end of the chain. Submit the previous link.
@@ -2290,16 +2303,16 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, struct sqe_submit *sqes,
 			io_queue_sqe(ctx, link, &link->submit);
 			link = NULL;
 		}
-		prev_was_link = (sqes[i].sqe->flags & IOSQE_IO_LINK) != 0;
+		prev_was_link = (s.sqe->flags & IOSQE_IO_LINK) != 0;
 
 		if (unlikely(mm_fault)) {
-			io_cqring_add_event(ctx, sqes[i].sqe->user_data,
+			io_cqring_add_event(ctx, s.sqe->user_data,
 						-EFAULT);
 		} else {
-			sqes[i].has_user = has_user;
-			sqes[i].needs_lock = true;
-			sqes[i].needs_fixed_file = true;
-			io_submit_sqe(ctx, &sqes[i], statep, &link);
+			s.has_user = has_user;
+			s.needs_lock = true;
+			s.needs_fixed_file = true;
+			io_submit_sqe(ctx, &s, statep, &link);
 			submitted++;
 		}
 	}
@@ -2314,7 +2327,6 @@ static int io_submit_sqes(struct io_ring_ctx *ctx, struct sqe_submit *sqes,
 
 static int io_sq_thread(void *data)
 {
-	struct sqe_submit sqes[IO_IOPOLL_BATCH];
 	struct io_ring_ctx *ctx = data;
 	struct mm_struct *cur_mm = NULL;
 	mm_segment_t old_fs;
@@ -2329,8 +2341,8 @@ static int io_sq_thread(void *data)
 
 	timeout = inflight = 0;
 	while (!kthread_should_park()) {
-		bool all_fixed, mm_fault = false;
-		int i;
+		bool mm_fault = false;
+		unsigned int to_submit;
 
 		if (inflight) {
 			unsigned nr_events = 0;
@@ -2363,7 +2375,8 @@ static int io_sq_thread(void *data)
 				timeout = jiffies + ctx->sq_thread_idle;
 		}
 
-		if (!io_get_sqring(ctx, &sqes[0])) {
+		to_submit = io_sqring_entries(ctx);
+		if (!to_submit) {
 			/*
 			 * We're polling. If we're within the defined idle
 			 * period, then let us spin without work before going
@@ -2394,7 +2407,8 @@ static int io_sq_thread(void *data)
 			/* make sure to read SQ tail after writing flags */
 			smp_mb();
 
-			if (!io_get_sqring(ctx, &sqes[0])) {
+			to_submit = io_sqring_entries(ctx);
+			if (!to_submit) {
 				if (kthread_should_park()) {
 					finish_wait(&ctx->sqo_wait, &wait);
 					break;
@@ -2412,19 +2426,8 @@ static int io_sq_thread(void *data)
 			ctx->sq_ring->flags &= ~IORING_SQ_NEED_WAKEUP;
 		}
 
-		i = 0;
-		all_fixed = true;
-		do {
-			if (all_fixed && io_sqe_needs_user(sqes[i].sqe))
-				all_fixed = false;
-
-			i++;
-			if (i == ARRAY_SIZE(sqes))
-				break;
-		} while (io_get_sqring(ctx, &sqes[i]));
-
 		/* Unless all new commands are FIXED regions, grab mm */
-		if (!all_fixed && !cur_mm) {
+		if (!cur_mm) {
 			mm_fault = !mmget_not_zero(ctx->sqo_mm);
 			if (!mm_fault) {
 				use_mm(ctx->sqo_mm);
@@ -2432,8 +2435,9 @@ static int io_sq_thread(void *data)
 			}
 		}
 
-		inflight += io_submit_sqes(ctx, sqes, i, cur_mm != NULL,
-						mm_fault);
+		to_submit = min(to_submit, ctx->sq_entries);
+		inflight += io_submit_sqes(ctx, to_submit, cur_mm != NULL,
+					   mm_fault);
 
 		/* Commit SQ ring head once we've consumed all SQEs */
 		io_commit_sqring(ctx);
Signature · 1 line
2.20.1
author maintainer
#139 lore raw

PATCH 139/197 io_uring: Fix race for sqes with userspace

In reply to Greg Kroah-Hartman

From: Pavel Begunkov <[email protected]>

[ Upstream commit 935d1e45908afb8853c497f2c2bbbb685dec51dc ]

io_ring_submit() finalises with
1. io_commit_sqring(), which releases sqes to the userspace
2. Then calls to io_queue_link_head(), accessing released head's sqe

Reorder them.

---
 fs/io_uring.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/io_uring.c +2 -1
index 518042cc6628b..d447f43d64a24 100644
@@ -2488,13 +2488,14 @@ static int io_ring_submit(struct io_ring_ctx *ctx, unsigned int to_submit)
 		submit++;
 		io_submit_sqe(ctx, &s, statep, &link);
 	}
-	io_commit_sqring(ctx);
 
 	if (link)
 		io_queue_sqe(ctx, link, &link->submit);
 	if (statep)
 		io_submit_state_end(statep);
 
+	io_commit_sqring(ctx);
+
 	return submit;
 }
 
Signature · 1 line
2.20.1
author maintainer
#140 lore raw

PATCH 140/197 io_uring: used cached copies of sq->dropped and cq->overflow

In reply to Greg Kroah-Hartman

From: Jens Axboe <[email protected]>

[ Upstream commit 498ccd9eda49117c34e0041563d0da6ac40e52b8 ]

We currently use the ring values directly, but that can lead to issues if the application is malicious and changes these values on our behalf. Created in-kernel cached versions of them, and just overwrite the user side when we update them. This is similar to how we treat the sq/cq ring tail/head updates.

---
 fs/io_uring.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
fs/io_uring.c +8 -5
index d447f43d64a24..3c8906494a8e1 100644
@@ -221,6 +221,7 @@ struct io_ring_ctx {
 		unsigned		sq_entries;
 		unsigned		sq_mask;
 		unsigned		sq_thread_idle;
+		unsigned		cached_sq_dropped;
 		struct io_uring_sqe	*sq_sqes;
 
 		struct list_head	defer_list;
@@ -237,6 +238,7 @@ struct io_ring_ctx {
 		/* CQ ring */
 		struct io_cq_ring	*cq_ring;
 		unsigned		cached_cq_tail;
+		atomic_t		cached_cq_overflow;
 		unsigned		cq_entries;
 		unsigned		cq_mask;
 		struct wait_queue_head	cq_wait;
@@ -431,7 +433,8 @@ static inline bool io_sequence_defer(struct io_ring_ctx *ctx,
 	if ((req->flags & (REQ_F_IO_DRAIN|REQ_F_IO_DRAINED)) != REQ_F_IO_DRAIN)
 		return false;
 
-	return req->sequence != ctx->cached_cq_tail + ctx->sq_ring->dropped;
+	return req->sequence != ctx->cached_cq_tail + ctx->sq_ring->dropped
+					+ atomic_read(&ctx->cached_cq_overflow);
 }
 
 static struct io_kiocb *io_get_deferred_req(struct io_ring_ctx *ctx)
@@ -511,9 +514,8 @@ static void io_cqring_fill_event(struct io_ring_ctx *ctx, u64 ki_user_data,
 		WRITE_ONCE(cqe->res, res);
 		WRITE_ONCE(cqe->flags, 0);
 	} else {
-		unsigned overflow = READ_ONCE(ctx->cq_ring->overflow);
-
-		WRITE_ONCE(ctx->cq_ring->overflow, overflow + 1);
+		WRITE_ONCE(ctx->cq_ring->overflow,
+				atomic_inc_return(&ctx->cached_cq_overflow));
 	}
 }
 
@@ -2272,7 +2274,8 @@ static bool io_get_sqring(struct io_ring_ctx *ctx, struct sqe_submit *s)
 
 	/* drop invalid entries */
 	ctx->cached_sq_head++;
-	ring->dropped++;
+	ctx->cached_sq_dropped++;
+	WRITE_ONCE(ring->dropped, ctx->cached_sq_dropped);
 	return false;
 }
 
Signature · 1 line
2.20.1
author maintainer
#141 lore raw

PATCH 141/197 mmc: mxs: fix flags passed to dmaengine_prep_slave_sg

In reply to Greg Kroah-Hartman

From: Sascha Hauer <[email protected]>

commit 2bb9f7566ba7ab3c2154964461e37b52cdc6b91b upstream.

Since ceeeb99cd821 we no longer abuse the DMA_CTRL_ACK flag for custom driver use and introduced the MXS_DMA_CTRL_WAIT4END instead. We have not changed all users to this flag though. This patch fixes it for the mxs-mmc driver.

---
 drivers/mmc/host/mxs-mmc.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/mmc/host/mxs-mmc.c +4 -3
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/dma/mxs-dma.h>
 #include <linux/highmem.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -266,7 +267,7 @@ static void mxs_mmc_bc(struct mxs_mmc_ho
 	ssp->ssp_pio_words[2] = cmd1;
 	ssp->dma_dir = DMA_NONE;
 	ssp->slave_dirn = DMA_TRANS_NONE;
-	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
+	desc = mxs_mmc_prep_dma(host, MXS_DMA_CTRL_WAIT4END);
 	if (!desc)
 		goto out;
 
@@ -311,7 +312,7 @@ static void mxs_mmc_ac(struct mxs_mmc_ho
 	ssp->ssp_pio_words[2] = cmd1;
 	ssp->dma_dir = DMA_NONE;
 	ssp->slave_dirn = DMA_TRANS_NONE;
-	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
+	desc = mxs_mmc_prep_dma(host, MXS_DMA_CTRL_WAIT4END);
 	if (!desc)
 		goto out;
 
@@ -441,7 +442,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_
 	host->data = data;
 	ssp->dma_dir = dma_data_dir;
 	ssp->slave_dirn = slave_dirn;
-	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | MXS_DMA_CTRL_WAIT4END);
 	if (!desc)
 		goto out;
 
author maintainer
#142 lore raw

PATCH 142/197 mmc: cqhci: Commit descriptors before setting the doorbell

In reply to Greg Kroah-Hartman

From: Faiz Abbas <[email protected]>

commit c07d0073b9ec80a139d07ebf78e9c30d2a28279e upstream.

Add a write memory barrier to make sure that descriptors are actually written to memory, before ringing the doorbell.

---
 drivers/mmc/host/cqhci.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mmc/host/cqhci.c +2 -1
@@ -611,7 +611,8 @@ static int cqhci_request(struct mmc_host
 	cq_host->slot[tag].flags = 0;
 
 	cq_host->qcnt += 1;
-
+	/* Make sure descriptors are ready before ringing the doorbell */
+	wmb();
 	cqhci_writel(cq_host, 1 << tag, CQHCI_TDBR);
 	if (!(cqhci_readl(cq_host, CQHCI_TDBR) & (1 << tag)))
 		pr_debug("%s: cqhci: doorbell not set for tag %d\n",
author maintainer
#143 lore raw

PATCH 143/197 mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C

In reply to Greg Kroah-Hartman

From: Faiz Abbas <[email protected]>

commit feb40824d78eac5e48f56498dca941754dff33d7 upstream.

According to the App note[1] detailing the tuning algorithm, for temperatures < -20C, the initial tuning value should be min(largest value in LPW - 24, ceil(13/16 ratio of LPW)). The largest value in LPW is (max_window + 4 * (max_len - 1)) and not (max_window + 4 * max_len) itself. Fix this implementation.

[1] http://www.ti.com/lit/an/spraca9b/spraca9b.pdf

Fixes 961de0a856e3 ("mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)")
---
 drivers/mmc/host/sdhci-omap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/host/sdhci-omap.c +1 -1
@@ -372,7 +372,7 @@ static int sdhci_omap_execute_tuning(str
 	 * on temperature
 	 */
 	if (temperature < -20000)
-		phase_delay = min(max_window + 4 * max_len - 24,
+		phase_delay = min(max_window + 4 * (max_len - 1) - 24,
 				  max_window +
 				  DIV_ROUND_UP(13 * max_len, 16) * 4);
 	else if (temperature < 20000)
author maintainer
#144 lore raw

PATCH 144/197 mm/memory-failure.c: dont access uninitialized memmaps in memory_failure()

In reply to Greg Kroah-Hartman

From: David Hildenbrand <[email protected]>

commit 96c804a6ae8c59a9092b3d5dd581198472063184 upstream.

We should check for pfn_to_online_page() to not access uninitialized memmaps. Reshuffle the code so we don't have to duplicate the error message.

Fixes f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Cc Michal Hocko <[email protected]>
Cc <[email protected]> [4.13+]
---
 mm/memory-failure.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
mm/memory-failure.c +8 -6
@@ -1253,17 +1253,19 @@ int memory_failure(unsigned long pfn, in
 	if (!sysctl_memory_failure_recovery)
 		panic("Memory failure on page %lx", pfn);
 
-	if (!pfn_valid(pfn)) {
+	p = pfn_to_online_page(pfn);
+	if (!p) {
+		if (pfn_valid(pfn)) {
+			pgmap = get_dev_pagemap(pfn, NULL);
+			if (pgmap)
+				return memory_failure_dev_pagemap(pfn, flags,
+								  pgmap);
+		}
 		pr_err("Memory failure: %#lx: memory outside kernel control\n",
 			pfn);
 		return -ENXIO;
 	}
 
-	pgmap = get_dev_pagemap(pfn, NULL);
-	if (pgmap)
-		return memory_failure_dev_pagemap(pfn, flags, pgmap);
-
-	p = pfn_to_page(pfn);
 	if (PageHuge(p))
 		return memory_failure_hugetlb(pfn, flags);
 	if (TestSetPageHWPoison(p)) {
author maintainer
#145 lore raw

PATCH 145/197 mm/slub: fix a deadlock in show_slab_objects()

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

commit e4f8e513c3d353c134ad4eef9fd0bba12406c7c8 upstream.

A long time ago we fixed a similar deadlock in show_slab_objects() [1]. However, it is apparently due to the commits like 01fb58bcba63 ("slab:
remove synchronous synchronize_sched() from memcg cache deactivation path") and 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by just reading files in /sys/kernel/slab which will generate a lockdep splat below.

Since the "mem_hotplug_lock" here is only to obtain a stable online node mask while racing with NUMA node hotplug, in the worst case, the results may me miscalculated while doing NUMA node hotplug, but they shall be corrected by later reads of the same files.

WARNING: possible circular locking dependency detected
------------------------------------------------------
cat/5224 is trying to acquire lock:
ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at:
show_slab_objects+0x94/0x3a8

but task is already holding lock:
b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (kn->count#45){++++}:

         lock_acquire+0x31c/0x360
         __kernfs_remove+0x290/0x490
         kernfs_remove+0x30/0x44
         sysfs_remove_dir+0x70/0x88
         kobject_del+0x50/0xb0
         sysfs_slab_unlink+0x2c/0x38
         shutdown_cache+0xa0/0xf0
         kmemcg_cache_shutdown_fn+0x1c/0x34
         kmemcg_workfn+0x44/0x64
         process_one_work+0x4f4/0x950
         worker_thread+0x390/0x4bc
         kthread+0x1cc/0x1e8
         ret_from_fork+0x10/0x18

-> #1 (slab_mutex){+.+.}:

         lock_acquire+0x31c/0x360
         __mutex_lock_common+0x16c/0xf78
         mutex_lock_nested+0x40/0x50
         memcg_create_kmem_cache+0x38/0x16c
         memcg_kmem_cache_create_func+0x3c/0x70
         process_one_work+0x4f4/0x950
         worker_thread+0x390/0x4bc
         kthread+0x1cc/0x1e8
         ret_from_fork+0x10/0x18

-> #0 (mem_hotplug_lock.rw_sem){++++}:

         validate_chain+0xd10/0x2bcc
         __lock_acquire+0x7f4/0xb8c
         lock_acquire+0x31c/0x360
         get_online_mems+0x54/0x150
         show_slab_objects+0x94/0x3a8
         total_objects_show+0x28/0x34
         slab_attr_show+0x38/0x54
         sysfs_kf_seq_show+0x198/0x2d4
         kernfs_seq_show+0xa4/0xcc
         seq_read+0x30c/0x8a8
         kernfs_fop_read+0xa8/0x314
         __vfs_read+0x88/0x20c
         vfs_read+0xd8/0x10c
         ksys_read+0xb0/0x120
         __arm64_sys_read+0x54/0x88
         el0_svc_handler+0x170/0x240
         el0_svc+0x8/0xc

other info that might help us debug this:

  Chain exists of:
    mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45

   Possible unsafe locking scenario:
         CPU0                    CPU1
         ----                    ----
    lock(kn->count#45);
                                 lock(slab_mutex);
                                 lock(kn->count#45);
    lock(mem_hotplug_lock.rw_sem);

*** DEADLOCK ***

3 locks held by cat/5224:
#0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8 #1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0 #2: b8ff009693eee398 (kn->count#45){++++}, at:

  kernfs_seq_start+0x44/0xf0

  stack backtrace:
  Call trace:
   dump_backtrace+0x0/0x248
   show_stack+0x20/0x2c
   dump_stack+0xd0/0x140
   print_circular_bug+0x368/0x380
   check_noncircular+0x248/0x250
   validate_chain+0xd10/0x2bcc
   __lock_acquire+0x7f4/0xb8c
   lock_acquire+0x31c/0x360
   get_online_mems+0x54/0x150
   show_slab_objects+0x94/0x3a8
   total_objects_show+0x28/0x34
   slab_attr_show+0x38/0x54
   sysfs_kf_seq_show+0x198/0x2d4
   kernfs_seq_show+0xa4/0xcc
   seq_read+0x30c/0x8a8
   kernfs_fop_read+0xa8/0x314
   __vfs_read+0x88/0x20c
   vfs_read+0xd8/0x10c
   ksys_read+0xb0/0x120
   __arm64_sys_read+0x54/0x88
   el0_svc_handler+0x170/0x240
   el0_svc+0x8/0xc

I think it is important to mention that this doesn't expose the show_slab_objects to use-after-free. There is only a single path that might really race here and that is the slab hotplug notifier callback __kmem_cache_shrink (via slab_mem_going_offline_callback) but that path doesn't really destroy kmem_cache_node data structures.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html

[[email protected]: add comment explaining why we don't need mem_hotplug_lock]
Fixes 01fb58bcba63 ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path")
Fixes 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}")
Cc Christoph Lameter <[email protected]>
Cc Pekka Enberg <[email protected]>
Cc David Rientjes <[email protected]>
Cc Joonsoo Kim <[email protected]>
Cc Tejun Heo <[email protected]>
Cc Vladimir Davydov <[email protected]>
Cc Roman Gushchin <[email protected]>
---
 mm/slub.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
mm/slub.c +11 -2
@@ -4836,7 +4836,17 @@ static ssize_t show_slab_objects(struct
 		}
 	}
 
-	get_online_mems();
+	/*
+	 * It is impossible to take "mem_hotplug_lock" here with "kernfs_mutex"
+	 * already held which will conflict with an existing lock order:
+	 *
+	 * mem_hotplug_lock->slab_mutex->kernfs_mutex
+	 *
+	 * We don't really need mem_hotplug_lock (to hold off
+	 * slab_mem_going_offline_callback) here because slab's memory hot
+	 * unplug code doesn't destroy the kmem_cache->node[] data.
+	 */
+
 #ifdef CONFIG_SLUB_DEBUG
 	if (flags & SO_ALL) {
 		struct kmem_cache_node *n;
@@ -4877,7 +4887,6 @@ static ssize_t show_slab_objects(struct
 			x += sprintf(buf + x, " N%d=%lu",
 					node, nodes[node]);
 #endif
-	put_online_mems();
 	kfree(nodes);
 	return x + sprintf(buf + x, "\n");
 }
author maintainer
#146 lore raw

PATCH 146/197 mm/page_owner: dont access uninitialized memmaps when reading /proc/pagetypeinfo

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

commit a26ee565b6cd8dc2bf15ff6aa70bbb28f928b773 upstream.

Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched.

For example, when not onlining a memory block that is spanned by a zone and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and CONFIG_PAGE_POISONING, we can trigger a kernel BUG:

  :/# echo 1 > /sys/devices/system/memory/memory40/online
  :/# echo 1 > /sys/devices/system/memory/memory42/online
  :/# cat /proc/pagetypeinfo > test.file
   page:fffff2c585200000 is uninitialized and poisoned
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
   There is not page extension available.
   ------------[ cut here ]------------
   kernel BUG at include/linux/mm.h:1107!
   invalid opcode: 0000 [#1] SMP NOPTI

Please note that this change does not affect ZONE_DEVICE, because pagetypeinfo_showmixedcount_print() is called from mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and ZONE_DEVICE is never populated (zone->present_pages always 0).

[[email protected]: move check to outer loop, add comment, rephrase description]
Fixes f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after d0dc12e86b319
Cc Thomas Gleixner <[email protected]>
Cc "Peter Zijlstra (Intel)" <[email protected]>
Cc Miles Chen <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Qian Cai <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc <[email protected]> [4.13+]
---
 mm/page_owner.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
mm/page_owner.c +3 -2
@@ -258,7 +258,8 @@ void pagetypeinfo_showmixedcount_print(s
 	 * not matter as the mixed block count will still be correct
 	 */
 	for (; pfn < end_pfn; ) {
-		if (!pfn_valid(pfn)) {
+		page = pfn_to_online_page(pfn);
+		if (!page) {
 			pfn = ALIGN(pfn + 1, MAX_ORDER_NR_PAGES);
 			continue;
 		}
@@ -266,13 +267,13 @@ void pagetypeinfo_showmixedcount_print(s
 		block_end_pfn = ALIGN(pfn + 1, pageblock_nr_pages);
 		block_end_pfn = min(block_end_pfn, end_pfn);
 
-		page = pfn_to_page(pfn);
 		pageblock_mt = get_pageblock_migratetype(page);
 
 		for (; pfn < block_end_pfn; pfn++) {
 			if (!pfn_valid_within(pfn))
 				continue;
 
+			/* The pageblock is online, no need to recheck. */
 			page = pfn_to_page(pfn);
 
 			if (page_zone(page) != zone)
author maintainer
#147 lore raw

PATCH 149/197 mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release

In reply to Greg Kroah-Hartman

From: Roman Gushchin <[email protected]>

commit b749ecfaf6c53ce79d6ab66afd2fc34189a073b1 upstream.

Karsten reported the following panic in __free_slab() happening on a s390x machine:

  Unable to handle kernel pointer dereference in virtual kernel address space
  Failing address: 0000000000000000 TEID: 0000000000000483
  Fault in home space mode while using kernel ASCE.
  AS:00000000017d4007 R3:000000007fbd0007 S:000000007fbff000 P:000000000000003d
  Oops: 0004 ilc:3 Ý#1¨ PREEMPT SMP
  Modules linked in: tcp_diag inet_diag xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_at nf_nat
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-05872-g6133e3e4bada-dirty #14
  Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
  Krnl PSW : 0704d00180000000 00000000003cadb6 (__free_slab+0x686/0x6b0)
             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
  Krnl GPRS: 00000000f3a32928 0000000000000000 000000007fbf5d00 000000000117c4b8
             0000000000000000 000000009e3291c1 0000000000000000 0000000000000000
             0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
             0000000000000003 0000000000000008 000000002b478b00 000003d080a97600
             000000000117ba00 000003e000057db0 00000000003cabcc 000003e000057c78
  Krnl Code: 00000000003cada6: e310a1400004        lg      %r1,320(%r10)
             00000000003cadac: c0e50046c286        brasl   %r14,ca32b8
            #00000000003cadb2: a7f4fe36            brc     15,3caa1e
            >00000000003cadb6: e32060800024        stg     %r2,128(%r6)
             00000000003cadbc: a7f4fd9e            brc     15,3ca8f8
             00000000003cadc0: c0e50046790c        brasl   %r14,c99fd8
             00000000003cadc6: a7f4fe2c            brc     15,3caa
             00000000003cadc6: a7f4fe2c            brc     15,3caa1e
             00000000003cadca: ecb1ffff00d9        aghik   %r11,%r1,-1
  Call Trace:
  (<00000000003cabcc> __free_slab+0x49c/0x6b0)
   <00000000001f5886> rcu_core+0x5a6/0x7e0
   <0000000000ca2dea> __do_softirq+0xf2/0x5c0
   <0000000000152644> irq_exit+0x104/0x130
   <000000000010d222> do_IRQ+0x9a/0xf0
   <0000000000ca2344> ext_int_handler+0x130/0x134
   <0000000000103648> enabled_wait+0x58/0x128
  (<0000000000103634> enabled_wait+0x44/0x128)
   <0000000000103b00> arch_cpu_idle+0x40/0x58
   <0000000000ca0544> default_idle_call+0x3c/0x68
   <000000000018eaa4> do_idle+0xec/0x1c0
   <000000000018ee0e> cpu_startup_entry+0x36/0x40
   <000000000122df34> arch_call_rest_init+0x5c/0x88
   <0000000000000000> 0x0
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   <00000000003ca8f4> __free_slab+0x1c4/0x6b0
  Kernel panic - not syncing: Fatal exception in interrupt

The kernel panics on an attempt to dereference the NULL memcg pointer. When shutdown_cache() is called from the kmem_cache_destroy() context, a memcg kmem_cache might have empty slab pages in a partial list, which are still charged to the memory cgroup.

These pages are released by free_partial() at the beginning of shutdown_cache(): either directly or by scheduling a RCU-delayed work (if the kmem_cache has the SLAB_TYPESAFE_BY_RCU flag). The latter case is when the reported panic can happen: memcg_unlink_cache() is called immediately after shrinking partial lists, without waiting for scheduled RCU works. It sets the kmem_cache->memcg_params.memcg pointer to NULL, and the following attempt to dereference it by __free_slab() from the RCU work context causes the panic.

To fix the issue, let's postpone the release of the memcg pointer to destroy_memcg_params(). It's called from a separate work context by slab_caches_to_rcu_destroy_workfn(), which contains a full RCU barrier. This guarantees that all scheduled page release RCU works will complete before the memcg pointer will be zeroed.

Big thanks for Karsten for the perfect report containing all necessary information, his help with the analysis of the problem and testing of the fix.

---
 mm/slab_common.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
mm/slab_common.c +5 -4
@@ -178,10 +178,13 @@ static int init_memcg_params(struct kmem
 
 static void destroy_memcg_params(struct kmem_cache *s)
 {
-	if (is_root_cache(s))
+	if (is_root_cache(s)) {
 		kvfree(rcu_access_pointer(s->memcg_params.memcg_caches));
-	else
+	} else {
+		mem_cgroup_put(s->memcg_params.memcg);
+		WRITE_ONCE(s->memcg_params.memcg, NULL);
 		percpu_ref_exit(&s->memcg_params.refcnt);
+	}
 }
 
 static void free_memcg_params(struct rcu_head *rcu)
@@ -253,8 +256,6 @@ static void memcg_unlink_cache(struct km
 	} else {
 		list_del(&s->memcg_params.children_node);
 		list_del(&s->memcg_params.kmem_caches_node);
-		mem_cgroup_put(s->memcg_params.memcg);
-		WRITE_ONCE(s->memcg_params.memcg, NULL);
 	}
 }
 #else
author maintainer
#148 lore raw

PATCH 150/197 mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()

In reply to Greg Kroah-Hartman

From: Vlastimil Babka <[email protected]>

commit a2e9a5afce080226edbf1882d63d99bf32070e9e upstream.

Florian and Dave reported [1] a NULL pointer dereference in __reset_isolation_pfn(). While the exact cause is unclear, staring at the code revealed two bugs, which might be related.

One bug is that if zone starts in the middle of pageblock, block_page might correspond to different pfn than block_pfn, and then the pfn_valid_within() checks will check different pfn's than those accessed via struct page. This might result in acessing an unitialized page in CONFIG_HOLES_IN_ZONE configs.

The other bug is that end_page refers to the first page of next pageblock and not last page of current pageblock. The online and valid check is then wrong and with sections, the while (page < end_page) loop might wander off actual struct page arrays.

[1] https://lore.kernel.org/linux-xfs/[email protected]/

---
 mm/compaction.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
mm/compaction.c +4 -3
@@ -270,14 +270,15 @@ __reset_isolation_pfn(struct zone *zone,
 
 	/* Ensure the start of the pageblock or zone is online and valid */
 	block_pfn = pageblock_start_pfn(pfn);
-	block_page = pfn_to_online_page(max(block_pfn, zone->zone_start_pfn));
+	block_pfn = max(block_pfn, zone->zone_start_pfn);
+	block_page = pfn_to_online_page(block_pfn);
 	if (block_page) {
 		page = block_page;
 		pfn = block_pfn;
 	}
 
 	/* Ensure the end of the pageblock or zone is online and valid */
-	block_pfn += pageblock_nr_pages;
+	block_pfn = pageblock_end_pfn(pfn) - 1;
 	block_pfn = min(block_pfn, zone_end_pfn(zone) - 1);
 	end_page = pfn_to_online_page(block_pfn);
 	if (!end_page)
@@ -303,7 +304,7 @@ __reset_isolation_pfn(struct zone *zone,
 
 		page += (1 << PAGE_ALLOC_COSTLY_ORDER);
 		pfn += (1 << PAGE_ALLOC_COSTLY_ORDER);
-	} while (page < end_page);
+	} while (page <= end_page);
 
 	return false;
 }