Add netopeer2 package (and dependencies)
v5 cover Add netopeer2 package (and dependencies)
From: Heiko Thiery <[email protected]>
This patchset contains the netopeer2 package and the required dependencies. Netopeer2 is a set of tools implementing network configuration tools based on the NETCONF Protocol.
This includes the packages for sysrepo, netopeer2-server, netopeer2-cli, netopeer2-keystored.
Also add the host target support for libev. This is needed for the install steps of sysrepo and netopeer2-server and netopeer2-keystored.
---
Changes v1 -> v2:
- replace libredblack with libavl because this is also supported by debian.
- changes all over the place to integrate review comments.
Changes v2 -> v3:
- download the netopeer2 sources only once for the packages netopeer2-cli, netopeer2-keystored and netopeer2-server. Use the same value in <pkg>_DL_SUBDIR and <pkg>_SOURCE for all 3 packages.
- add sysv init scripts for netopeer-server, sysrepod and syrepo-plugind.
- changes all over the place to integrate review comments.
Changes v3 -> v4:
- add config option for sysrepo examples
- remove select of BR2_PACKAGE_NETOPEER2_SERVER_TLS in netopeer2-server because it creates a recursive dependency.
Changes v4 -> v5:
- fix up the 'v' prefix in the versions
- sysrepo: fix REPOSITORY_LOC not to install in staging for host build
- sysrepo: disable building python/cpp buildings
- sysrepo: fix indentations in init scripts
- sysrepo: fix alphabetic sorting issue in Config.in
- sysrepo: move comment to the end of Config.in
- sysrepo: drop config option for host gcc version
- netopeer2: drop config option for host gcc version
- netopeer2: move comment to the end of Config.in
Heiko Thiery (5):
package/libev: use host-autotools-package macro
package/sysrepo: add package
package/netopeer2-keystored: add package
package/netopeer2-server: add package
package/netopeer2-cli: add package
DEVELOPERS | 4 + package/Config.in | 4 + package/libev/libev.mk | 1 + package/netopeer2-cli/Config.in | 21 +++++ package/netopeer2-cli/netopeer2-cli.hash | 1 + package/netopeer2-cli/netopeer2-cli.mk | 17 ++++ package/netopeer2-keystored/Config.in | 17 ++++ .../netopeer2-keystored.hash | 2 + .../netopeer2-keystored.mk | 31 +++++++ package/netopeer2-server/Config.in | 51 +++++++++++ package/netopeer2-server/S52netopeer2-server | 90 +++++++++++++++++++ .../netopeer2-server/netopeer2-server.hash | 1 + package/netopeer2-server/netopeer2-server.mk | 33 +++++++ ...espect-CMAKE_INSTALL_PREFIX-and-DEST.patch | 33 +++++++ ...t-make-systemd-unit-dir-configurable.patch | 40 +++++++++ package/sysrepo/Config.in | 35 ++++++++ package/sysrepo/S50sysrepod | 45 ++++++++++ package/sysrepo/S51sysrepo-plugind | 50 +++++++++++ package/sysrepo/sysrepo.hash | 2 + package/sysrepo/sysrepo.mk | 60 +++++++++++++ 20 files changed, 538 insertions(+) create mode 100644 package/netopeer2-cli/Config.in create mode 120000 package/netopeer2-cli/netopeer2-cli.hash create mode 100644 package/netopeer2-cli/netopeer2-cli.mk create mode 100644 package/netopeer2-keystored/Config.in create mode 100644 package/netopeer2-keystored/netopeer2-keystored.hash create mode 100644 package/netopeer2-keystored/netopeer2-keystored.mk create mode 100644 package/netopeer2-server/Config.in create mode 100644 package/netopeer2-server/S52netopeer2-server create mode 120000 package/netopeer2-server/netopeer2-server.hash create mode 100644 package/netopeer2-server/netopeer2-server.mk create mode 100644 package/sysrepo/0001-CMakeLists.txt-respect-CMAKE_INSTALL_PREFIX-and-DEST.patch create mode 100644 package/sysrepo/0002-CMakeLists.txt-make-systemd-unit-dir-configurable.patch create mode 100644 package/sysrepo/Config.in create mode 100644 package/sysrepo/S50sysrepod create mode 100644 package/sysrepo/S51sysrepo-plugind create mode 100644 package/sysrepo/sysrepo.hash create mode 100644 package/sysrepo/sysrepo.mk
Signature · 1 line
2.20.1
PATCH v5 1/5 package/libev: use host-autotools-package macro
From: Heiko Thiery <[email protected]>
Enable host support for the lib because the package host-sysrepo (depends on package libnetconf2) is needed by package netopeer2keystored.
--- package/libev/libev.mk | 1 + 1 file changed, 1 insertion(+)
package/libev/libev.mk +1 -0
@@ -18,3 +18,4 @@ endef LIBEV_POST_PATCH_HOOKS += LIBEV_DISABLE_EVENT_H_INSTALL $(eval $(autotools-package)) +$(eval $(host-autotools-package))
Signature · 1 line
2.20.1
Arnout Vandecappelle
AppliedPATCH v5 1/5 package/libev: use host-autotools-package macro
Quoted 6 lines · Heiko Thiery
From: Heiko Thiery <[email protected]>
Enable host support for the lib because the package host-sysrepo (depends on package libnetconf2) is needed by package netopeer2keystored.
Signed-off-by Heiko Thiery <[email protected]>
Applied to master, thanks.
Regards,
Arnout
Quoted 14 lines
--- package/libev/libev.mk | 1 + 1 file changed, 1 insertion(+)package/libev/libev.mk +1
-0@@ -18,3 +18,4 @@ endef LIBEV_POST_PATCH_HOOKS += LIBEV_DISABLE_EVENT_H_INSTALL $(eval $(autotools-package)) +$(eval $(host-autotools-package))
PATCH v5 2/5 package/sysrepo: add package
In reply to Heiko ThieryFrom: Heiko Thiery <[email protected]>
sysrepo is a YANG-based configuration and operational state data store for Unix/Linux applications. It is a dependency of Netopeer, a NETCONF server.
--- DEVELOPERS | 1 + package/Config.in | 1 + ...espect-CMAKE_INSTALL_PREFIX-and-DEST.patch | 33 ++++++++++ ...t-make-systemd-unit-dir-configurable.patch | 40 +++++++++++++ package/sysrepo/Config.in | 35 +++++++++++ package/sysrepo/S50sysrepod | 45 ++++++++++++++ package/sysrepo/S51sysrepo-plugind | 50 ++++++++++++++++ package/sysrepo/sysrepo.hash | 2 + package/sysrepo/sysrepo.mk | 60 +++++++++++++++++++ 9 files changed, 267 insertions(+) create mode 100644 package/sysrepo/0001-CMakeLists.txt-respect-CMAKE_INSTALL_PREFIX-and-DEST.patch create mode 100644 package/sysrepo/0002-CMakeLists.txt-make-systemd-unit-dir-configurable.patch create mode 100644 package/sysrepo/Config.in create mode 100644 package/sysrepo/S50sysrepod create mode 100644 package/sysrepo/S51sysrepo-plugind create mode 100644 package/sysrepo/sysrepo.hash create mode 100644 package/sysrepo/sysrepo.mk
DEVELOPERS +1 -0
@@ -1048,6 +1048,7 @@ F: package/python-sip/ N: Heiko Thiery <[email protected]> F: package/libnetconf2/ F: package/libyang/ +F: package/sysrepo/ N: Henrique Camargo <[email protected]> F: package/json-glib/
package/Config.in +1 -0
@@ -1680,6 +1680,7 @@ menu "Networking" source "package/slirp/Config.in" source "package/snmppp/Config.in" source "package/sofia-sip/Config.in" + source "package/sysrepo/Config.in" source "package/thrift/Config.in" source "package/usbredir/Config.in" source "package/wampcc/Config.in"
package/sysrepo/0001-CMakeLists.txt-respect-CMAKE_INSTALL_PREFIX-and-DEST.patch new file +33 -0
@@ -0,0 +1,33 @@ +From c4a2195febbd5d436f8de79d8391d8da9aa60ac4 Mon Sep 17 00:00:00 2001 +From: Michael Walle <[email protected]> +Date: Thu, 10 Oct 2019 14:58:16 +0200 +Subject: [PATCH 1/2] CMakeLists.txt: respect CMAKE_INSTALL_PREFIX and DESTDIR + +Don't use absolute pathnames in the install function. This way the files +will be installed in the correct location even if CMAKE_INSTALL_PREFIX +and DESTDIR are changed. + +Patch comes from upstream pull-request: +https://github.com/sysrepo/sysrepo/pull/1638 + +Signed-off-by: Heiko Thiery <[email protected]> +--- + CMakeLists.txt | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index e4521088..14b7cd36 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -357,7 +357,7 @@ if(WITH_SYSTEMD) + ${PROJECT_SOURCE_DIR}/deploy/systemd/sysrepod.service + ${PROJECT_SOURCE_DIR}/deploy/systemd/sysrepo-plugind.service + ) +- install(DIRECTORY ${PROJECT_SOURCE_DIR}/deploy/systemd/ DESTINATION "/lib/systemd/system" ++ install(DIRECTORY ${PROJECT_SOURCE_DIR}/deploy/systemd/ DESTINATION "lib/systemd/system" + FILES_MATCHING PATTERN "*.service") + endif() + +-- +2.20.1 +
package/sysrepo/0002-CMakeLists.txt-make-systemd-unit-dir-configurable.patch new file +40 -0
@@ -0,0 +1,40 @@ +From 906927b4ee2dd0d5bd669d193fc851d14919fbd1 Mon Sep 17 00:00:00 2001 +From: Michael Walle <[email protected]> +Date: Thu, 10 Oct 2019 14:38:57 +0200 +Subject: [PATCH 2/2] CMakeLists.txt: make systemd unit dir configurable + +Patch comes from upstream pull-request: +https://github.com/sysrepo/sysrepo/pull/1638 + +Signed-off-by: Heiko Thiery <[email protected]> +--- + CMakeLists.txt | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/CMakeLists.txt b/CMakeLists.txt +index 14b7cd36..14c84675 100644 +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -217,6 +217,9 @@ else() + message(FATAL_ERROR "Unknown file format \"${FILE_FORMAT_EXT}\", must be json, xml, or lyb.") + endif() + ++set(SYSTEMD_UNIT_DIR "lib/systemd/system/" CACHE STRING ++ "Path to the systemd service directory.") ++ + # timeouts + set(REQUEST_TIMEOUT 15 CACHE STRING + "Timeout (in seconds) for Sysrepo API requests. Set to 0 for no timeout.") +@@ -357,7 +360,8 @@ if(WITH_SYSTEMD) + ${PROJECT_SOURCE_DIR}/deploy/systemd/sysrepod.service + ${PROJECT_SOURCE_DIR}/deploy/systemd/sysrepo-plugind.service + ) +- install(DIRECTORY ${PROJECT_SOURCE_DIR}/deploy/systemd/ DESTINATION "lib/systemd/system" ++ install(DIRECTORY ${PROJECT_SOURCE_DIR}/deploy/systemd/ ++ DESTINATION "${SYSTEMD_UNIT_DIR}" + FILES_MATCHING PATTERN "*.service") + endif() + +-- +2.20.1 +
package/sysrepo/Config.in new file +35 -0
@@ -0,0 +1,35 @@ +config BR2_PACKAGE_SYSREPO + bool "sysrepo" + depends on BR2_USE_MMU # libnetconf2 + depends on !BR2_STATIC_LIBS + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11 + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" # host-protbuf + select BR2_PACKAGE_LIBAVL + select BR2_PACKAGE_LIBEV + select BR2_PACKAGE_LIBNETCONF2 + select BR2_PACKAGE_LIBYANG + select BR2_PACKAGE_PCRE + select BR2_PACKAGE_PCRE_UCP + select BR2_PACKAGE_PROTOBUF_C + help + Sysrepo is an YANG-based configuration and operational state + data store for Unix/Linux applications. + + https://github.com/sysrepo + +if BR2_PACKAGE_SYSREPO + +config BR2_PACKAGE_SYSREPO_EXAMPLES + bool "enable examples" + help + Enable sysrepo examples. + +endif + +comment "sysrepo needs a toolchain w/ C++, threads, dynamic library, gcc >= 4.8" + depends on BR2_USE_MMU + depends on BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP \ + || !BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
package/sysrepo/S50sysrepod new file +45 -0
45 lines not on this page · raw message
package/sysrepo/S51sysrepo-plugind new file +50 -0
50 lines not on this page · raw message
package/sysrepo/sysrepo.hash new file +2 -0
@@ -0,0 +1,2 @@ +sha256 d3066c1776a6727b96bbb3517eb646d0bb6037e8e1addcbe873cae590493843e sysrepo-0.7.8.tar.gz +sha256 28a773bfffa828ec38c030fc8ace5f3aeb90926ec1309bbd135441c4387ce3cd LICENSE
package/sysrepo/sysrepo.mk new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
2.20.1
Arnout Vandecappelle
AppliedPATCH v5 2/5 package/sysrepo: add package
Quoted 7 lines · Heiko Thiery
From: Heiko Thiery <[email protected]>
sysrepo is a YANG-based configuration and operational state data store for Unix/Linux applications. It is a dependency of Netopeer, a NETCONF server.
Signed-off-by Heiko Thiery <[email protected]>
Applied to master, thanks, but still with a number of modifications.
Regards,
Arnout
[snip]
package/sysrepo/0001-CMakeLists.txt-respect-CMAKE_INSTALL_PREFIX-and-DEST.patch line 4
Quoted 4 lines
package/sysrepo/0001-CMakeLists.txt-respect-CMAKE_INSTALL_PREFIX-and-DEST.patch new file +4
-0+From c4a2195febbd5d436f8de79d8391d8da9aa60ac4 Mon Sep 17 00:00:00 2001 +From: Michael Walle <[email protected]> +Date: Thu, 10 Oct 2019 14:58:16 +0200 +Subject: [PATCH 1/2] CMakeLists.txt: respect CMAKE_INSTALL_PREFIX and DESTDIR
As reported by check-package, the 1/2 shouldn't be there.
[snip]
package/sysrepo/Config.in line 6
Quoted 12 lines
package/sysrepo/Config.in new file +6
-0@@ -0,0 +1,35 @@ +config BR2_PACKAGE_SYSREPO + bool "sysrepo" + depends on BR2_USE_MMU # libnetconf2 + depends on !BR2_STATIC_LIBS + depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_TOOLCHAIN_HAS_THREADS
I double-checked that all of the above dependencies really come from the
package itself and are not just from libnetconf2.
package/sysrepo/Config.in line 15
Quoted 9 lines
package/sysrepo/Config.in new file +9
-0+ depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11 + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" # host-protbuf + select BR2_PACKAGE_LIBAVL + select BR2_PACKAGE_LIBEV + select BR2_PACKAGE_LIBNETCONF2 + select BR2_PACKAGE_LIBYANG + select BR2_PACKAGE_PCRE + select BR2_PACKAGE_PCRE_UCP + select BR2_PACKAGE_PROTOBUF_C
I have not checked if any of the above carried more dependencies. Probably not.
Quoted 26 lines
package/sysrepo/Config.in new file +20
-0+ help + Sysrepo is an YANG-based configuration and operational state + data store for Unix/Linux applications. + + https://github.com/sysrepo + +if BR2_PACKAGE_SYSREPO + +config BR2_PACKAGE_SYSREPO_EXAMPLES + bool "enable examples" + help + Enable sysrepo examples. + +endif + +comment "sysrepo needs a toolchain w/ C++, threads, dynamic library, gcc >= 4.8" + depends on BR2_USE_MMU + depends on BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP \ + || !BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"package/sysrepo/S50sysrepod new file +0
-0
package/sysrepo/S50sysrepod line 7
Quoted 7 lines
package/sysrepo/S50sysrepod new file +7
-0@@ -0,0 +1,45 @@ +#!/bin/sh + +DAEMON="sysrepod" +PIDFILE="/var/run/$DAEMON.pid" + +SYSREPOD_ARGS="" +
You forgot to source /etc/default/$DAEMON here.
Which makes me wonder: on which example did you base this?
package/sysrepo/S50sysrepod line 10
Quoted 3 lines
package/sysrepo/S50sysrepod new file +3
-0+start() { + printf 'Starting %s: ' "$DAEMON" + start-stop-daemon -S -b -q -p "$PIDFILE" -x "/usr/bin/$DAEMON" \
This can't work. sysrepod daemonizes by itself, so the -b is not needed and the
-p would create a race condition between start-stop-daemon and sysrepod writing to the same file. So I've removed the -b and -p options. I haven't tested this, but I guess you haven't either :-)
IMO, if you're in a situation that you can't (easily) test a start script, it's
better to not provide one instead of providing an incorrect one :-)
Quoted 121 lines
package/sysrepo/S50sysrepod new file +35
-0+ -- $SYSREPOD_ARGS + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +stop() { + printf 'Stopping %s: ' "$DAEMON" + start-stop-daemon -K -q -p "$PIDFILE" + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +restart() { + stop + sleep 1 + start +} + +case "$1" in + start|stop|restart) + "$1";; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esacpackage/sysrepo/S51sysrepo-plugind new file +50
-0@@ -0,0 +1,50 @@ +#!/bin/sh + +DAEMON="sysrepo-plugind" +PIDFILE="/var/run/$DAEMON.pid" + +SYSREPO_PLUGIND_ARGS="" + +start() { + printf 'Starting %s: ' "$DAEMON" + start-stop-daemon -S -b -q -p $PIDFILE -x "/usr/bin/$DAEMON" \ + -- $SYSREPO_PLUGIND_ARGS + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +stop() { + printf 'Stopping %s: ' "$DAEMON" + start-stop-daemon -K -q -p $PIDFILE + status=$? + if [ "$status" -eq 0 ]; then + echo "OK" + else + echo "FAIL" + fi + return "$status" +} + +restart() { + stop + sleep 1 + start +} + +reload() { + # we do not support real reload .. just restart + restart +} + +case "$1" in + start|stop|restart|reload) + "$1";; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 +esacpackage/sysrepo/sysrepo.hash new file +2
-0@@ -0,0 +1,2 @@ +sha256 d3066c1776a6727b96bbb3517eb646d0bb6037e8e1addcbe873cae590493843e sysrepo-0.7.8.tar.gz +sha256 28a773bfffa828ec38c030fc8ace5f3aeb90926ec1309bbd135441c4387ce3cd LICENSEpackage/sysrepo/sysrepo.mk new file +16
-0@@ -0,0 +1,60 @@ +################################################################################ +# +# sysrepo +# +################################################################################ + +SYSREPO_VERSION = 0.7.8 +SYSREPO_SITE = $(call github,sysrepo,sysrepo,v$(SYSREPO_VERSION)) +SYSREPO_INSTALL_STAGING = YES +SYSREPO_LICENSE = Apache-2.0 +SYSREPO_LICENSE_FILES = LICENSE +SYSREPO_DEPENDENCIES = libev libnetconf2 libavl libyang pcre protobuf-c host-sysrepo +HOST_SYSREPO_DEPENDENCIES = host-libev host-libnetconf2 host-libavl host-libyang host-pcre host-protobuf-c + +SYSREPO_CONF_OPTS = \ + -DGEN_PYTHON2_TESTS=OFF \
package/sysrepo/sysrepo.mk line 26
Quoted 10 lines
package/sysrepo/sysrepo.mk new file +10
-0+ -DENABLE_TESTS=OFF \ + -DGEN_CPP_BINDINGS=OFF \ + -DGEN_LANGUAGE_BINDINGS=OFF \ + -DGEN_PYTHON_BINDINGS=OFF \ + -DBUILD_CPP_EXAMPLES=OFF \ + -DCALL_SYSREPOCTL_BIN=$(HOST_DIR)/bin/sysrepoctl \ + -DCALL_SYSREPOCFG_BIN=$(HOST_DIR)/bin/sysrepocfg \ + -DBUILD_EXAMPLES=$(if $(BR2_PACKAGE_SYSREPO_EXAMPLES),ON,OFF) \ + $(if $(BR2_INIT_SYSTEMD),-DWITH_SYSTEMD=ON) \ + $(if $(BR2_INIT_SYSTEMD),-DSYSTEMD_UNIT_DIR=usr/lib/systemd/system)
I don't understand why this is needed. It is the default, no? OK, without the
usr bit, but systemd requires merged /usr so that doesn't matter.
package/sysrepo/sysrepo.mk line 30
Quoted 4 lines
package/sysrepo/sysrepo.mk new file +4
-0+ +# On ARM, this is needed to prevent unaligned memory access with an optimized +# build .. https://github.com/sysrepo/sysrepo/issues/947 +SYSREPO_CONF_OPTS += -DUSE_SR_MEM_MGMT=OFF
I first thought, why not do this on ARM only. But looking at the bug report, I
wouldn't trust this memory management feature on any platform :-)
Quoted 17 lines
package/sysrepo/sysrepo.mk new file +17
-0+ +define SYSREPO_INSTALL_INIT_SYSV + $(INSTALL) -m 755 -D package/sysrepo/S50sysrepod \ + $(TARGET_DIR)/etc/init.d/S50sysrepod + $(INSTALL) -m 755 -D package/sysrepo/S51sysrepo-plugind \ + $(TARGET_DIR)/etc/init.d/S51sysrepo-plugind +endef + +define SYSREPO_INSTALL_INIT_SYSTEMD + mkdir -p $(TARGET_DIR)/etc/systemd/systemd/multi-user.target.wants + ln -fs ../../../../usr/lib/systemd/system/sysrepod.service \ + $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants + ln -fs ../../../../usr/lib/systemd/system/sysrepo-plugind.service \ + $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants +endef + +HOST_SYSREPO_CONF_OPTS = \
package/sysrepo/sysrepo.mk line 57
Quoted 10 lines
package/sysrepo/sysrepo.mk new file +10
-0+ -DGEN_PYTHON2_TESTS=OFF \ + -DENABLE_TESTS=OFF \ + -DGEN_CPP_BINDINGS=OFF \ + -DGEN_LANGUAGE_BINDINGS=OFF \ + -DGEN_PYTHON_BINDINGS=OFF \ + -DCALL_TARGET_BINS_DIRECTLY=OFF \ + -DBUILD_EXAMPLES=OFF \ + -DBUILD_CPP_EXAMPLES=OFF \ + -DREPOSITORY_LOC=$(HOST_DIR)/etc/sysrepo \ + -DSUBSCRIPTIONS_SOCKET_DIR=$(HOST_DIR)/var/run/sysrepo-subscriptions
I'm surprised the latter two are needed, I would expect them to default to
something under the install prefix. But ok.
Regards,
Arnout
Quoted 4 lines
package/sysrepo/sysrepo.mk new file +3
-0+ +$(eval $(cmake-package)) +$(eval $(host-cmake-package))
PATCH v5 3/5 package/netopeer2-keystored: add package
In reply to Heiko ThieryFrom: Heiko Thiery <[email protected]>
netopeer2 keystored plugin.
--- DEVELOPERS | 1 + package/Config.in | 1 + package/netopeer2-keystored/Config.in | 17 ++++++++++ .../netopeer2-keystored.hash | 2 ++ .../netopeer2-keystored.mk | 31 +++++++++++++++++++ 5 files changed, 52 insertions(+) create mode 100644 package/netopeer2-keystored/Config.in create mode 100644 package/netopeer2-keystored/netopeer2-keystored.hash create mode 100644 package/netopeer2-keystored/netopeer2-keystored.mk
DEVELOPERS +1 -0
@@ -1048,6 +1048,7 @@ F: package/python-sip/ N: Heiko Thiery <[email protected]> F: package/libnetconf2/ F: package/libyang/ +F: package/netopeer2-keystored/ F: package/sysrepo/ N: Henrique Camargo <[email protected]>
package/Config.in +1 -0
@@ -1659,6 +1659,7 @@ menu "Networking" source "package/mongoose/Config.in" source "package/nanomsg/Config.in" source "package/neon/Config.in" + source "package/netopeer2-keystored/Config.in" source "package/nghttp2/Config.in" source "package/norm/Config.in" source "package/nss-mdns/Config.in"
package/netopeer2-keystored/Config.in new file +17 -0
@@ -0,0 +1,17 @@ +config BR2_PACKAGE_NETOPEER2_KEYSTORED + bool "netopeer2-keystored" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_STATIC_LIBS + select BR2_PACKAGE_LIBYANG + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_SYSREPO + help + Netopeer2 is a set of tools implementing network + configuration tools based on the NETCONF Protocol. + + This is the keystored sysrepo plugin. + + https://github.com/CESNET/Netopeer2 + +comment "needs a toolchain w/ threads, dynamic libraray" + depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS
package/netopeer2-keystored/netopeer2-keystored.hash new file +2 -0
@@ -0,0 +1,2 @@ +sha256 59688271be4fecbbee671fc7eb3dc0538b13b4baab53e923e26eaeb33e6f7ec0 netopeer2-0.7-r2.tar.gz +sha256 932b75a8610a5c58e0fe0f70f8e4ebbcf3a2392acc16a88e95aebcdbdb9245e0 LICENSE
package/netopeer2-keystored/netopeer2-keystored.mk new file +31 -0
@@ -0,0 +1,31 @@ +################################################################################ +# +# netopeer2-keystored +# +################################################################################ + +NETOPEER2_KEYSTORED_VERSION = 0.7-r2 +NETOPEER2_KEYSTORED_SOURCE = netopeer2-$(NETOPEER2_KEYSTORED_VERSION).tar.gz +NETOPEER2_KEYSTORED_SITE = $(call github,CESNET,Netopeer2,v$(NETOPEER2_KEYSTORED_VERSION)) +NETOPEER2_KEYSTORED_DL_SUBDIR = netopeer2 +NETOPEER2_KEYSTORED_SUBDIR = keystored +NETOPEER2_KEYSTORED_LICENSE = BSD-3-Clause +NETOPEER2_KEYSTORED_LICENSE_FILES = LICENSE +NETOPEER2_KEYSTORED_DEPENDENCIES = host-sysrepo sysrepo + +NETOPEER2_KEYSTORED_CONF_OPTS = \ + -DKEYSTORED_DEFER_SSH_KEY=ON \ + -DSSH_KEY_INSTALL=ON \ + -DMODEL_INSTALL=ON \ + -DSYSREPOCTL_EXECUTABLE=$(HOST_DIR)/bin/sysrepoctl \ + -DSYSREPOCFG_EXECUTABLE=$(HOST_DIR)/bin/sysrepocfg + +define NETOPEER2_KEYSTORED_PERMISSIONS + /etc/sysrepo/data/ietf-keystore.persist f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-keystore.running f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-keystore.running.lock f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-keystore.startup f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-keystore.startup.lock f 600 0 0 - - - - - +endef + +$(eval $(cmake-package))
Signature · 1 line
2.20.1
PATCH v5 4/5 package/netopeer2-server: add package
In reply to Heiko ThieryFrom: Heiko Thiery <[email protected]>
Netopeer2 is a set of tools implementing network configuration tools based on the NETCONF Protocol. This is the second generation of the toolset, originally available as the Netopeer project. Netopeer2 is based on the new generation of the NETCONF and YANG libraries - libyang and libnetconf2. The Netopeer server uses sysrepo as a NETCONF datastore implementation.
--- DEVELOPERS | 1 + package/Config.in | 1 + package/netopeer2-server/Config.in | 51 +++++++++++ package/netopeer2-server/S52netopeer2-server | 90 +++++++++++++++++++ .../netopeer2-server/netopeer2-server.hash | 1 + package/netopeer2-server/netopeer2-server.mk | 33 +++++++ 6 files changed, 177 insertions(+) create mode 100644 package/netopeer2-server/Config.in create mode 100644 package/netopeer2-server/S52netopeer2-server create mode 120000 package/netopeer2-server/netopeer2-server.hash create mode 100644 package/netopeer2-server/netopeer2-server.mk
DEVELOPERS +1 -0
@@ -1049,6 +1049,7 @@ N: Heiko Thiery <[email protected]> F: package/libnetconf2/ F: package/libyang/ F: package/netopeer2-keystored/ +F: package/netopeer2-server/ F: package/sysrepo/ N: Henrique Camargo <[email protected]>
package/Config.in +1 -0
@@ -1660,6 +1660,7 @@ menu "Networking" source "package/nanomsg/Config.in" source "package/neon/Config.in" source "package/netopeer2-keystored/Config.in" + source "package/netopeer2-server/Config.in" source "package/nghttp2/Config.in" source "package/norm/Config.in" source "package/nss-mdns/Config.in"
package/netopeer2-server/Config.in new file +51 -0
51 lines not on this page · raw message
package/netopeer2-server/S52netopeer2-server new file +90 -0
90 lines not on this page · raw message
package/netopeer2-server/netopeer2-server.hash new file +1 -0
@@ -0,0 +1 @@ +../netopeer2-keystored/netopeer2-keystored.hash
package/netopeer2-server/netopeer2-server.mk new file +33 -0
@@ -0,0 +1,33 @@ +################################################################################ +# +# netopeer2-server +# +################################################################################ + +NETOPEER2_SERVER_VERSION = 0.7-r2 +NETOPEER2_SERVER_SOURCE = netopeer2-$(NETOPEER2_SERVER_VERSION).tar.gz +NETOPEER2_SERVER_SITE = $(call github,CESNET,Netopeer2,v$(NETOPEER2_SERVER_VERSION)) +NETOPEER2_SERVER_DL_SUBDIR = netopeer2 +NETOPEER2_SERVER_LICENSE = BSD-3-Clause +NETOPEER2_SERVER_LICENSE_FILES = LICENSE +NETOPEER2_SERVER_SUBDIR = server +NETOPEER2_SERVER_DEPENDENCIES = libyang sysrepo + +NETOPEER2_SERVER_CONF_OPTS = \ + -DENABLE_CONFIGURATION=ON \ + -DKEYSTORED_KEYS_DIR=/etc/keystored/keys + +define NETOPEER2_SERVER_INSTALL_INIT_SYSV + $(INSTALL) -m 755 -D package/netopeer2-server/S52netopeer2-server \ + $(TARGET_DIR)/etc/init.d/S52netopeer2-server +endef + +define NETOPEER2_SERVER_PERMISSIONS + /etc/sysrepo/data/ietf-netconf-server.persist f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-netconf-server.running f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-netconf-server.running.lock f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-netconf-server.startup f 600 0 0 - - - - - + /etc/sysrepo/data/ietf-netconf-server.startup.lock f 600 0 0 - - - - - +endef + +$(eval $(cmake-package))
Signature · 1 line
2.20.1
PATCH v5 5/5 package/netopeer2-cli: add package
In reply to Heiko ThieryFrom: Heiko Thiery <[email protected]>
netopeer2 CLI - simple command line interface to connect to a NETCONF server (device).
--- DEVELOPERS | 1 + package/Config.in | 1 + package/netopeer2-cli/Config.in | 21 +++++++++++++++++++++ package/netopeer2-cli/netopeer2-cli.hash | 1 + package/netopeer2-cli/netopeer2-cli.mk | 17 +++++++++++++++++ 5 files changed, 41 insertions(+) create mode 100644 package/netopeer2-cli/Config.in create mode 120000 package/netopeer2-cli/netopeer2-cli.hash create mode 100644 package/netopeer2-cli/netopeer2-cli.mk
DEVELOPERS +1 -0
@@ -1048,6 +1048,7 @@ F: package/python-sip/ N: Heiko Thiery <[email protected]> F: package/libnetconf2/ F: package/libyang/ +F: package/netopeer2-cli/ F: package/netopeer2-keystored/ F: package/netopeer2-server/ F: package/sysrepo/
package/Config.in +1 -0
@@ -1659,6 +1659,7 @@ menu "Networking" source "package/mongoose/Config.in" source "package/nanomsg/Config.in" source "package/neon/Config.in" + source "package/netopeer2-cli/Config.in" source "package/netopeer2-keystored/Config.in" source "package/netopeer2-server/Config.in" source "package/nghttp2/Config.in"
package/netopeer2-cli/Config.in new file +21 -0
@@ -0,0 +1,21 @@ +config BR2_PACKAGE_NETOPEER2_CLI + bool "netopeer2-cli" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_STATIC_LIBS + select BR2_PACKAGE_LIBYANG + select BR2_PACKAGE_LIBNETCONF2 + select BR2_PACKAGE_LIBSSH + select BR2_PACKAGE_LIBSSH_SERVER + select BR2_PACKAGE_PCRE # libyang + select BR2_PACKAGE_PCRE_UCP # libyang + select BR2_PACKAGE_SYSREPO + help + Netopeer2 is a set of tools implementing network + configuration tools based on the NETCONF Protocol. + + This is the CLI client part. + + https://github.com/CESNET/Netopeer2 + +comment "netopeer2cli needs a toolchain w/ threads, dynamic libraray" + depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS
package/netopeer2-cli/netopeer2-cli.hash new file +1 -0
@@ -0,0 +1 @@ +../netopeer2-keystored/netopeer2-keystored.hash
package/netopeer2-cli/netopeer2-cli.mk new file +17 -0
@@ -0,0 +1,17 @@ +################################################################################ +# +# netopeer2-cli +# +################################################################################ + +NETOPEER2_CLI_VERSION = 0.7-r2 +NETOPEER2_CLI_SOURCE = netopeer2-$(NETOPEER2_CLI_VERSION).tar.gz +NETOPEER2_CLI_SITE = $(call github,CESNET,Netopeer2,v$(NETOPEER2_CLI_VERSION)) +NETOPEER2_CLI_DL_SUBDIR = netopeer2 +NETOPEER2_CLI_LICENSE = BSD-3-Clause +NETOPEER2_CLI_LICENSE_FILES = LICENSE +NETOPEER2_CLI_SUBDIR = cli +NETOPEER2_CLI_INSTALL_STAGING = YES +NETOPEER2_CLI_DEPENDENCIES = libnetconf2 libyang sysrepo + +$(eval $(cmake-package))
Signature · 1 line
2.20.1