Skip to contentSkip to conversation

Cleanup in rtl8712

PATCH In review Cristiane Naves 2 participants 4 messages Oct 28, 2019 Staging

lore
Share & tools
lore
#0 lore raw

v4 cover Cleanup in rtl8712

Cleanup in rtl8712

Changes in v2:
- Arranging conflict between author name and signed-off-by.
- Remove unnecessary parentheses.
- Change the driver name to rtl8712.

Changes in v3:
- Change alignment of eth_type.
- Change alignment of SN_EQUAL.
- Remove commit of unneeded parentheses.

Changes in v4:
- Fixing misplaced parentheses of previous version.

Cristiane Naves (2):
staging: rtl8712: Fix Alignment of open parenthesis
staging: rtl8712: Remove lines before a close brace

 drivers/staging/rtl8712/rtl8712_recv.c | 38 ++++++++++++++++------------------
 1 file changed, 18 insertions(+), 20 deletions(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH v4 1/2 staging: rtl8712: Fix Alignment of open parenthesis

Fix alignment should match open parenthesis. Issue found by checkpatch.

---
 drivers/staging/rtl8712/rtl8712_recv.c | 36 +++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)
drivers/staging/rtl8712/rtl8712_recv.c +18 -18
index af12c16..36d5d2c 100644
@@ -61,13 +61,13 @@ void r8712_init_recv_priv(struct recv_priv *precvpriv,
 		precvbuf->ref_cnt = 0;
 		precvbuf->adapter = padapter;
 		list_add_tail(&precvbuf->list,
-				 &(precvpriv->free_recv_buf_queue.queue));
+			      &(precvpriv->free_recv_buf_queue.queue));
 		precvbuf++;
 	}
 	precvpriv->free_recv_buf_queue_cnt = NR_RECVBUFF;
 	tasklet_init(&precvpriv->recv_tasklet,
-	     (void(*)(unsigned long))recv_tasklet,
-	     (unsigned long)padapter);
+		     (void(*)(unsigned long))recv_tasklet,
+		     (unsigned long)padapter);
 	skb_queue_head_init(&precvpriv->rx_skb_queue);
 
 	skb_queue_head_init(&precvpriv->free_recv_skb_queue);
@@ -140,7 +140,7 @@ void r8712_free_recvframe(union recv_frame *precvframe,
 }
 
 static void update_recvframe_attrib_from_recvstat(struct rx_pkt_attrib *pattrib,
-					   struct recv_stat *prxstat)
+						  struct recv_stat *prxstat)
 {
 	u16 drvinfo_sz;
 
@@ -177,7 +177,7 @@ static void update_recvframe_attrib_from_recvstat(struct rx_pkt_attrib *pattrib,
 
 /*perform defrag*/
 static union recv_frame *recvframe_defrag(struct _adapter *adapter,
-				   struct  __queue *defrag_q)
+					  struct  __queue *defrag_q)
 {
 	struct list_head *plist, *phead;
 	u8 wlanhdr_offset;
@@ -379,26 +379,26 @@ static void amsdu_to_msdu(struct _adapter *padapter, union recv_frame *prframe)
 		/* convert hdr + possible LLC headers into Ethernet header */
 		eth_type = (sub_skb->data[6] << 8) | sub_skb->data[7];
 		if (sub_skb->len >= 8 &&
-		   ((!memcmp(sub_skb->data, rfc1042_header, SNAP_SIZE) &&
-		   eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
-		   !memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE))) {
+		    ((!memcmp(sub_skb->data, rfc1042_header, SNAP_SIZE) &&
+		      eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) ||
+		     !memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE))) {
 			/* remove RFC1042 or Bridge-Tunnel encapsulation and
 			 * replace EtherType
 			 */
 			skb_pull(sub_skb, SNAP_SIZE);
 			memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
-				ETH_ALEN);
+			       ETH_ALEN);
 			memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst,
-				ETH_ALEN);
+			       ETH_ALEN);
 		} else {
 			__be16 len;
 			/* Leave Ethernet header part of hdr and full payload */
 			len = htons(sub_skb->len);
 			memcpy(skb_push(sub_skb, 2), &len, 2);
 			memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
-				ETH_ALEN);
+			       ETH_ALEN);
 			memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst,
-				ETH_ALEN);
+			       ETH_ALEN);
 		}
 		/* Indicate the packets to upper layer */
 		if (sub_skb) {
@@ -472,7 +472,7 @@ static int check_indicate_seq(struct recv_reorder_ctrl *preorder_ctrl,
 }
 
 static int enqueue_reorder_recvframe(struct recv_reorder_ctrl *preorder_ctrl,
-			      union recv_frame *prframe)
+				     union recv_frame *prframe)
 {
 	struct list_head *phead, *plist;
 	union recv_frame *pnextrframe;
@@ -499,8 +499,8 @@ static int enqueue_reorder_recvframe(struct recv_reorder_ctrl *preorder_ctrl,
 }
 
 int r8712_recv_indicatepkts_in_order(struct _adapter *padapter,
-			       struct recv_reorder_ctrl *preorder_ctrl,
-			       int bforced)
+				     struct recv_reorder_ctrl *preorder_ctrl,
+				     int bforced)
 {
 	struct list_head *phead, *plist;
 	union recv_frame *prframe;
@@ -530,7 +530,7 @@ int r8712_recv_indicatepkts_in_order(struct _adapter *padapter,
 			plist = plist->next;
 			list_del_init(&(prframe->u.hdr.list));
 			if (SN_EQUAL(preorder_ctrl->indicate_seq,
-			    pattrib->seq_num))
+				     pattrib->seq_num))
 				preorder_ctrl->indicate_seq =
 				  (preorder_ctrl->indicate_seq + 1) % 4096;
 			/*indicate this recv_frame*/
@@ -555,7 +555,7 @@ int r8712_recv_indicatepkts_in_order(struct _adapter *padapter,
 }
 
 static int recv_indicatepkt_reorder(struct _adapter *padapter,
-			     union recv_frame *prframe)
+				    union recv_frame *prframe)
 {
 	unsigned long irql;
 	struct rx_pkt_attrib *pattrib = &prframe->u.hdr.attrib;
@@ -624,7 +624,7 @@ void r8712_reordering_ctrl_timeout_handler(void *pcontext)
 }
 
 static int r8712_process_recv_indicatepkts(struct _adapter *padapter,
-			      union recv_frame *prframe)
+					   union recv_frame *prframe)
 {
 	int retval = _SUCCESS;
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
Signature · 1 line
2.7.4
#2 lore raw

PATCH v4 2/2 staging: rtl8712: Remove lines before a close brace

In reply to Cristiane Naves

Fix Blank lines aren't necessary before a close brace '}'. Issue found by checkpatch.

---
 drivers/staging/rtl8712/rtl8712_recv.c | 2 --
 1 file changed, 2 deletions(-)
drivers/staging/rtl8712/rtl8712_recv.c +0 -2
index 36d5d2c..06de031 100644
@@ -289,7 +289,6 @@ union recv_frame *r8712_recvframe_chk_defrag(struct _adapter *padapter,
 			r8712_free_recvframe(precv_frame, pfree_recv_queue);
 			prtnframe = NULL;
 		}
-
 	}
 	if ((ismfrag == 0) && (fragnum != 0)) {
 		/* the last fragment frame
@@ -438,7 +437,6 @@ void r8712_rxcmd_event_hdl(struct _adapter *padapter, void *prxcmdbuf)
 		r8712_event_handle(padapter, (__le32 *)poffset);
 		poffset += (cmd_len + 8);/*8 bytes alignment*/
 	} while (le32_to_cpu(voffset) & BIT(31));
-
 }
 
 static int check_indicate_seq(struct recv_reorder_ctrl *preorder_ctrl,
Signature · 1 line
2.7.4
#3 lore raw

Re: [PATCH v4 2/2] staging: rtl8712: Remove lines before a close brace

Quoted 7 lines · Cristiane Naves

Fix Blank lines aren't necessary before a close brace '}'. Issue found by checkpatch.

---
 drivers/staging/rtl8712/rtl8712_recv.c | 2 --
 1 file changed, 2 deletions(-)

This patch did not apply to my tree, it was already present.

thanks,

greg k-h