Skip to contentSkip to conversation

dt-bindings: soc: amlogic: canvas: convert to yaml

PATCH In review Neil Armstrong 3 participants 3 messages Oct 21, 2019 – Oct 29, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: soc: amlogic: canvas: convert to yaml

Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Canvas over to a YAML schemas.

---
 .../bindings/soc/amlogic/amlogic,canvas.txt   | 33 -------------
 .../bindings/soc/amlogic/amlogic,canvas.yaml  | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
 create mode 100644 Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt deleted +0 -33
deleted file mode 100644
index e876f3ce54f6..000000000000
@@ -1,33 +0,0 @@
-Amlogic Canvas
-================================
-
-A canvas is a collection of metadata that describes a pixel buffer.
-Those metadata include: width, height, phyaddr, wrapping and block mode.
-Starting with GXBB the endianness can also be described.
-
-Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data
-rather than use the phy addresses directly. For instance, this is the case for
-the video decoders and the display.
-
-Amlogic SoCs have 256 canvas.
-
-Device Tree Bindings:
----------------------
-
-Video Lookup Table
---------------------------
-
-Required properties:
-- compatible: has to be one of:
-		- "amlogic,meson8-canvas", "amlogic,canvas" on Meson8
-		- "amlogic,meson8b-canvas", "amlogic,canvas" on Meson8b
-		- "amlogic,meson8m2-canvas", "amlogic,canvas" on Meson8m2
-		- "amlogic,canvas" on GXBB and newer
-- reg: Base physical address and size of the canvas registers.
-
-Example:
-
-canvas: video-lut@48 {
-	compatible = "amlogic,canvas";
-	reg = <0x0 0x48 0x0 0x14>;
-};
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml new file +49 -0

49 lines not on this page · raw message

Signature · 7 lines
2.22.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
reviewer Reviewed-by on v1 1/1
#1 lore raw
Quoted 6 lines · Neil Armstrong

Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Canvas over to a YAML schemas.

one nit-pick below, but I leave it up to Maxime to decide whether it's needed:

[...]

Quoted 6 lines
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml new file +0 -0
new file mode 100644
index 000000000000..4322f876753d

Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml line 8

Quoted 8 lines
Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml new file +8 -0
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Canvas

personally I prefer "Amlogic Canvas Video Lookup Table" because that's also what we use (abbreviated as video-lut) for the node name

Martin

maintainer
#2 lore raw
In reply to Neil Armstrong
Quoted 12 lines · Neil Armstrong

Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Canvas over to a YAML schemas.

---
 .../bindings/soc/amlogic/amlogic,canvas.txt   | 33 -------------
 .../bindings/soc/amlogic/amlogic,canvas.yaml  | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
 create mode 100644 Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml

Updated 'title' and applied, thanks.

Rob