cpuidle: play_idle: Make play_idle more flexible
Subsystems (5)
PATCH v6 1/3 cpuidle: play_idle: Make play_idle more flexible
The play_idle function has two users, the intel powerclamp and the idle_injection.
The idle injection cooling device uses the function via the idle_injection powercap's APIs. Unfortunately, play_idle is currently limited by the idle state depth: by default the deepest idle state is selected. On the ARM[64] platforms, most of the time it is the cluster idle state, the exit latency and the residency can be very high. That reduces the scope of the idle injection usage because the impact on the performances can be very significant.
If the idle injection cycles can be done with a shallow state like a retention state, the cooling effect would eventually give similar results than the cpufreq cooling device.
In order to prepare the function to receive an idle state parameter, let's replace the 'use_deepest_state' boolean field with 'use_state' and use this value to enter the specific idle state.
The current code keeps the default behavior which is go to the deepest idle state.
---
V6:
- Change use_state variable name by use_state_idx:
https://lkml.org/lkml/2019/10/28/874 V5: - Fix s2idle default idle state value: https://lkml.org/lkml/2019/10/15/522 --- drivers/cpuidle/cpuidle.c | 21 +++++++++++---------- include/linux/cpuidle.h | 13 ++++++------- kernel/sched/idle.c | 11 +++++++---- 3 files changed, 24 insertions(+), 21 deletions(-)
drivers/cpuidle/cpuidle.c +11 -10
@@ -99,31 +99,31 @@ static int find_deepest_state(struct cpuidle_driver *drv, }/** -* cpuidle_use_deepest_state - Set/clear governor override flag. -* @enable: New value of the flag. +* cpuidle_use_state - Force the cpuidle framework to enter an idle state. +* @state: An integer for an idle state * -* Set/unset the current CPU to use the deepest idle state (override governors -* going forward if set). +* Specify an idle state the cpuidle framework must step in and bypass +* the idle state selection process. */ -void cpuidle_use_deepest_state (bool enable) +void cpuidle_use_state (int index) {struct cpuidle_device *dev;preempt_disable (); dev =cpuidle_get_device ();if (dev) - dev->use_deepest_state = enable; + dev->use_state_idx = index;preempt_enable (); }/** * cpuidle_find_deepest_state - Find the deepest available idle state. -* @drv: cpuidle driver for the given CPU. -* @dev: cpuidle device for the given CPU. */ -int cpuidle_find_deepest_state (struct cpuidle_driver *drv, -struct cpuidle_device *dev) +int cpuidle_find_deepest_state (void ) { +struct cpuidle_device *dev =cpuidle_get_device (); +struct cpuidle_driver *drv =cpuidle_get_cpu_driver (dev); +return find_deepest_state (drv, dev,UINT_MAX ,0 , false); }
@@ -554,6 +554,7 @@ static void __cpuidle_unregister_device(struct cpuidle_device *dev)static void __cpuidle_device_init (struct cpuidle_device *dev) {memset (dev->states_usage,0 ,sizeof (dev->states_usage)); + dev->use_state_idx =CPUIDLE_STATE_NOUSE ; dev->last_residency =0 ; dev->next_hrtimer =0 ; }
include/linux/cpuidle.h +6 -7
@@ -15,6 +15,7 @@#include <linux/list.h> #include <linux/hrtimer.h> +#define CPUIDLE_STATE_NOUSE -1#define CPUIDLE_STATE_MAX 10#define CPUIDLE_NAME_LEN 16#define CPUIDLE_DESC_LEN 32
@@ -80,11 +81,11 @@ struct cpuidle_driver_kobj;struct cpuidle_device {unsigned int registered:1 ;unsigned int enabled:1 ; -unsigned int use_deepest_state:1 ;unsigned int poll_time_limit:1 ;unsigned int cpu;ktime_t next_hrtimer; +int use_state_idx;int last_state_idx;int last_residency;u64 poll_limit_ns;
@@ -203,19 +204,17 @@ static inline struct cpuidle_device *cpuidle_get_device(void) {return NULL; }#endif #ifdef CONFIG_CPU_IDLE -extern int cpuidle_find_deepest_state (struct cpuidle_driver *drv, -struct cpuidle_device *dev); +extern int cpuidle_find_deepest_state (void );extern int cpuidle_enter_s2idle (struct cpuidle_driver *drv,struct cpuidle_device *dev); -extern void cpuidle_use_deepest_state (bool enable); +extern void cpuidle_use_state (int index);#else -static inline int cpuidle_find_deepest_state (struct cpuidle_driver *drv, -struct cpuidle_device *dev) +static inline int cpuidle_find_deepest_state (void ) {return -ENODEV ; }static inline int cpuidle_enter_s2idle (struct cpuidle_driver *drv,struct cpuidle_device *dev) {return -ENODEV ; } -static inline void cpuidle_use_deepest_state (bool enable) +static inline void cpuidle_use_state (int index) { }#endif
kernel/sched/idle.c +7 -4
@@ -165,7 +165,8 @@ static void cpuidle_idle_call(void)* until a proper wakeup interrupt happens. */ -if (idle_should_enter_s2idle () || dev->use_deepest_state) { +if (idle_should_enter_s2idle () || + dev->use_state_idx !=CPUIDLE_STATE_NOUSE ) {if (idle_should_enter_s2idle ()) {rcu_idle_enter ();
@@ -176,12 +177,14 @@ static void cpuidle_idle_call(void) }rcu_idle_exit (); + next_state =cpuidle_find_deepest_state (); + }else { + next_state = dev->use_state_idx; }tick_nohz_idle_stop_tick ();rcu_idle_enter (); - next_state =cpuidle_find_deepest_state (drv, dev);call_cpuidle (drv, dev, next_state); }else {bool stop_tick = true;
@@ -328,7 +331,7 @@ void play_idle(unsigned long duration_us)rcu_sleep_check ();preempt_disable (); current->flags |=PF_IDLE ; -cpuidle_use_deepest_state (true); +cpuidle_use_state (cpuidle_find_deepest_state ()); it.done =0 ;hrtimer_init_on_stack (&it.timer,CLOCK_MONOTONIC ,HRTIMER_MODE_REL );
@@ -339,7 +342,7 @@ void play_idle(unsigned long duration_us)while (!READ_ONCE (it.done))do_idle (); -cpuidle_use_deepest_state (false); +cpuidle_use_state (CPUIDLE_STATE_NOUSE ); current->flags &= ~PF_IDLE ;preempt_fold_need_resched ();
Signature · 1 line
2.17.1
PATCH v6 2/3 cpuidle: play_idle: Specify play_idle with an idle state
Currently, the play_idle function does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.
Export cpuidle_find_deepest_state() symbol as it is used from the intel_powerclamp driver as a module.
There is no functional changes, the cpuidle state is the deepest one.
---
V6:
- Change variable name 'state' -> 'index':
https://lkml.org/lkml/2019/10/28/874 V4: - Add EXPORT_SYMBOL_GPL(cpuidle_find_deepest_state) for the intel_powerclamp driver when this one is compiled as a module V3: - Add missing cpuidle.h header --- drivers/cpuidle/cpuidle.c | 1 + drivers/powercap/idle_inject.c | 4 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +++- include/linux/cpu.h | 2 +- kernel/sched/idle.c | 4 ++-- 5 files changed, 10 insertions(+), 5 deletions(-)
drivers/cpuidle/cpuidle.c +1 -0
@@ -126,6 +126,7 @@ int cpuidle_find_deepest_state(void)return find_deepest_state (drv, dev,UINT_MAX ,0 , false); } +EXPORT_SYMBOL_GPL (cpuidle_find_deepest_state);#ifdef CONFIG_SUSPEND static void enter_s2idle_proper(struct cpuidle_driver *drv,
drivers/powercap/idle_inject.c +3 -1
@@ -38,6 +38,7 @@#define pr_fmt (fmt) "ii_dev: " fmt#include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/hrtimer.h> #include <linux/kthread.h> #include <linux/sched.h>
@@ -138,7 +139,8 @@ static void idle_inject_fn(unsigned int cpu)*/ iit->should_run =0 ; -play_idle (READ_ONCE (ii_dev->idle_duration_us)); +play_idle (READ_ONCE (ii_dev->idle_duration_us), +cpuidle_find_deepest_state ()); }/**
drivers/thermal/intel/intel_powerclamp.c +3 -1
@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h>
@@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance; -play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ()); balance:if (clamping && w_data->clamping &&cpu_online (w_data->cpu))
include/linux/cpu.h +1 -1
@@ -179,7 +179,7 @@ void arch_cpu_idle_dead(void);int cpu_report_state (int cpu);int cpu_check_up_prepare (int cpu);void cpu_set_state_online (int cpu); -void play_idle (unsigned long duration_us); +void play_idle (unsigned long duration_us,int index);#ifdef CONFIG_HOTPLUG_CPU bool cpu_wait_death (unsigned int cpu,int seconds);
kernel/sched/idle.c +2 -2
@@ -314,7 +314,7 @@ static enum hrtimer_restart idle_inject_timer_fn(struct hrtimer *timer)return HRTIMER_NORESTART ; } -void play_idle (unsigned long duration_us) +void play_idle (unsigned long duration_us,int index) {struct idle_timer it;
@@ -331,7 +331,7 @@ void play_idle(unsigned long duration_us)rcu_sleep_check ();preempt_disable (); current->flags |=PF_IDLE ; -cpuidle_use_state (cpuidle_find_deepest_state ()); +cpuidle_use_state (index); it.done =0 ;hrtimer_init_on_stack (&it.timer,CLOCK_MONOTONIC ,HRTIMER_MODE_REL );
Signature · 1 line
2.17.1
Re: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
Quoted 34 lines · CET Daniel Lezcano
Currently, the
play_idlefunction does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.Export
cpuidle_find_deepest_state()symbol as it is used from theintel_powerclampdriver as a module.There is no functional changes, the cpuidle state is the deepest one.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Change variable name 'state' -> 'index':https://lkml.org/lkml/2019/10/28/874 V4: - Add EXPORT_SYMBOL_GPL(cpuidle_find_deepest_state) for the intel_powerclamp driver when this one is compiled as a module V3: - Add missing cpuidle.h header --- drivers/cpuidle/cpuidle.c | 1 + drivers/powercap/idle_inject.c | 4 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +++- include/linux/cpu.h | 2 +- kernel/sched/idle.c | 4 ++-- 5 files changed, 10 insertions(+), 5 deletions(-)drivers/cpuidle/cpuidle.c +0
-0
drivers/cpuidle/cpuidle.c int cpuidle_find_deepest_state(void) · line 129
Quoted 4 lines
drivers/cpuidle/cpuidle.c +1
-0@@ -126,6 +126,7 @@ int cpuidle_find_deepest_state(void)return find_deepest_state (drv, dev,UINT_MAX ,0 , false); } +EXPORT_SYMBOL_GPL (cpuidle_find_deepest_state);
That doesn't appear to be really necessary to me.
Quoted 16 lines
drivers/cpuidle/cpuidle.c +0
-0#ifdef CONFIG_SUSPEND static void enter_s2idle_proper(struct cpuidle_driver *drv,drivers/powercap/idle_inject.c +1
-0@@ -38,6 +38,7 @@#define pr_fmt (fmt) "ii_dev: " fmt#include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/hrtimer.h> #include <linux/kthread.h> #include <linux/sched.h>
drivers/powercap/idle_inject.c static void idle_inject_fn(unsigned int cpu) · line 143
Quoted 6 lines
drivers/powercap/idle_inject.c +2
-1@@ -138,7 +139,8 @@ static void idle_inject_fn(unsigned int cpu)*/ iit->should_run =0 ; -play_idle (READ_ONCE (ii_dev->idle_duration_us)); +play_idle (READ_ONCE (ii_dev->idle_duration_us), +cpuidle_find_deepest_state ());
The next patch changes this again and I'm not sure why this intermediate change is useful.
Quoted 16 lines
drivers/powercap/idle_inject.c +0
-0}/** drivers/thermal/intel/intel_powerclamp.c +1
-0@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h>
drivers/thermal/intel/intel_powerclamp.c static void clamp_idle_injection_func(struct kthread_work *work) · line 435
Quoted 6 lines
drivers/thermal/intel/intel_powerclamp.c +2
-1@@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance; -play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ());
I don't see a reason for changing the code here like this.
What you really need is to have a way to set a limit on the idle state exit latency for idle injection on ARM.
For that you can pass the exit latency limit to play_idle(), but then you need to change powerclamp to pass UNIT_MAX or similar which is ugly, or you can redefine cpuidle_use_deepest_state() to take the exit latency limit as the arg (with 0 meaning use_deepest_state == false).
In the latter case, it would be quite straightforward to add an exit_latency argument to cpuidle_find_deepest_state() and note that find_deepest_state() takes a max_latency arg already, so that would be a trivial change (hint!).
Re: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
Quoted 87 lines · Rafael J. Wysocki
Quoted 34 lines · CET Daniel Lezcano
Currently, the
play_idlefunction does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.Export
cpuidle_find_deepest_state()symbol as it is used from theintel_powerclampdriver as a module.There is no functional changes, the cpuidle state is the deepest one.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Change variable name 'state' -> 'index':https://lkml.org/lkml/2019/10/28/874 V4: - Add EXPORT_SYMBOL_GPL(cpuidle_find_deepest_state) for the intel_powerclamp driver when this one is compiled as a module V3: - Add missing cpuidle.h header --- drivers/cpuidle/cpuidle.c | 1 + drivers/powercap/idle_inject.c | 4 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +++- include/linux/cpu.h | 2 +- kernel/sched/idle.c | 4 ++-- 5 files changed, 10 insertions(+), 5 deletions(-)drivers/cpuidle/cpuidle.c +0
-0drivers/cpuidle/cpuidle.c int cpuidle_find_deepest_state(void) · line 129
Quoted 4 lines
drivers/cpuidle/cpuidle.c +1
-0@@ -126,6 +126,7 @@ int cpuidle_find_deepest_state(void)return find_deepest_state (drv, dev,UINT_MAX ,0 , false); } +EXPORT_SYMBOL_GPL (cpuidle_find_deepest_state);That doesn't appear to be really necessary to me.
Quoted 16 lines
drivers/cpuidle/cpuidle.c +0
-0#ifdef CONFIG_SUSPEND static void enter_s2idle_proper(struct cpuidle_driver *drv,drivers/powercap/idle_inject.c +1
-0@@ -38,6 +38,7 @@#define pr_fmt (fmt) "ii_dev: " fmt#include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/hrtimer.h> #include <linux/kthread.h> #include <linux/sched.h> drivers/powercap/idle_inject.c static void idle_inject_fn(unsigned int cpu) · line 143
Quoted 6 lines
drivers/powercap/idle_inject.c +2
-1@@ -138,7 +139,8 @@ static void idle_inject_fn(unsigned int cpu)*/ iit->should_run =0 ; -play_idle (READ_ONCE (ii_dev->idle_duration_us)); +play_idle (READ_ONCE (ii_dev->idle_duration_us), +cpuidle_find_deepest_state ());The next patch changes this again and I'm not sure why this intermediate change is useful.
Quoted 19 lines
drivers/powercap/idle_inject.c +0
-0}/** drivers/thermal/intel/intel_powerclamp.c +1
-0@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h> @@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance;
Quoted 8 lines
drivers/thermal/intel/intel_powerclamp.c static void clamp_idle_injection_func(struct kthread_work *work) · line 435
Quoted 3 lines
drivers/thermal/intel/intel_powerclamp.c +2
-1-play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ());I don't see a reason for changing the code here like this.
What you really need is to have a way to set a limit on the idle state exit latency for idle injection on ARM.
Mmh, yes you are right. The idle state number is part of the internals of the cpuidle framework while the exit latency is an input (from user or kernel).
Quoted 4 lines
For that you can pass the exit latency limit to
play_idle(), but then you need to change powerclamp to passUNIT_MAXor similar which is ugly, or you can redefinecpuidle_use_deepest_state()to take the exit latency limit as the arg (with 0 meaninguse_deepest_state== false).
Should it make sense to just get the resume latency in cpuidle_use_deepest_state() and pass the value to find_deepest_state()?
It is the only code path where the constraint is not taken into account AFAICT.
With this simple change, we can manage everything from the pm_qos API then and this series is no longer needed.
Quoted 4 lines
In the latter case, it would be quite straightforward to add an
exit_latencyargument tocpuidle_find_deepest_state()and note thatfind_deepest_state()takes amax_latencyarg already, so that would be a trivial change (hint!).
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Rafael J. Wysocki
maintainerRe: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
Quoted 102 lines · Daniel Lezcano
Quoted 87 lines · Rafael J. Wysocki
Quoted 34 lines · CET Daniel Lezcano
Currently, the
play_idlefunction does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.Export
cpuidle_find_deepest_state()symbol as it is used from theintel_powerclampdriver as a module.There is no functional changes, the cpuidle state is the deepest one.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Change variable name 'state' -> 'index':https://lkml.org/lkml/2019/10/28/874 V4: - Add EXPORT_SYMBOL_GPL(cpuidle_find_deepest_state) for the intel_powerclamp driver when this one is compiled as a module V3: - Add missing cpuidle.h header --- drivers/cpuidle/cpuidle.c | 1 + drivers/powercap/idle_inject.c | 4 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +++- include/linux/cpu.h | 2 +- kernel/sched/idle.c | 4 ++-- 5 files changed, 10 insertions(+), 5 deletions(-)drivers/cpuidle/cpuidle.c +0
-0drivers/cpuidle/cpuidle.c int cpuidle_find_deepest_state(void) · line 129
Quoted 4 lines
drivers/cpuidle/cpuidle.c +1
-0@@ -126,6 +126,7 @@ int cpuidle_find_deepest_state(void)return find_deepest_state (drv, dev,UINT_MAX ,0 , false); } +EXPORT_SYMBOL_GPL (cpuidle_find_deepest_state);That doesn't appear to be really necessary to me.
Quoted 16 lines
drivers/cpuidle/cpuidle.c +0
-0#ifdef CONFIG_SUSPEND static void enter_s2idle_proper(struct cpuidle_driver *drv,drivers/powercap/idle_inject.c +1
-0@@ -38,6 +38,7 @@#define pr_fmt (fmt) "ii_dev: " fmt#include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/hrtimer.h> #include <linux/kthread.h> #include <linux/sched.h> drivers/powercap/idle_inject.c static void idle_inject_fn(unsigned int cpu) · line 143
Quoted 6 lines
drivers/powercap/idle_inject.c +2
-1@@ -138,7 +139,8 @@ static void idle_inject_fn(unsigned int cpu)*/ iit->should_run =0 ; -play_idle (READ_ONCE (ii_dev->idle_duration_us)); +play_idle (READ_ONCE (ii_dev->idle_duration_us), +cpuidle_find_deepest_state ());The next patch changes this again and I'm not sure why this intermediate change is useful.
Quoted 19 lines
drivers/powercap/idle_inject.c +0
-0}/** drivers/thermal/intel/intel_powerclamp.c +1
-0@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h> @@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance;Quoted 8 lines
drivers/thermal/intel/intel_powerclamp.c static void clamp_idle_injection_func(struct kthread_work *work) · line 435
Quoted 3 lines
drivers/thermal/intel/intel_powerclamp.c +2
-1-play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ());I don't see a reason for changing the code here like this.
What you really need is to have a way to set a limit on the idle state exit latency for idle injection on ARM.
Mmh, yes you are right. The idle state number is part of the internals of the cpuidle framework while the exit latency is an input (from user or kernel).
Quoted 7 lines
Quoted 4 lines
For that you can pass the exit latency limit to
play_idle(), but then you need to change powerclamp to passUNIT_MAXor similar which is ugly, or you can redefinecpuidle_use_deepest_state()to take the exit latency limit as the arg (with 0 meaninguse_deepest_state== false).Should it make sense to just get the resume latency in
cpuidle_use_deepest_state()and pass the value tofind_deepest_state()?
Yes, I would change cpuidle_use_deepest_state() to take the max exit latency as the arg (maybe with 0 meaning "don't use the deepest state only any more").
Quoted 5 lines
It is the only code path where the constraint is not taken into account AFAICT.
With this simple change, we can manage everything from the
pm_qosAPI then and this series is no longer needed.
OK
Re: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
Quoted 109 lines · Rafael J. Wysocki
Quoted 107 lines · Daniel Lezcano
Quoted 87 lines · Rafael J. Wysocki
Quoted 34 lines · CET Daniel Lezcano
Currently, the
play_idlefunction does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.Export
cpuidle_find_deepest_state()symbol as it is used from theintel_powerclampdriver as a module.There is no functional changes, the cpuidle state is the deepest one.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Change variable name 'state' -> 'index':https://lkml.org/lkml/2019/10/28/874 V4: - Add EXPORT_SYMBOL_GPL(cpuidle_find_deepest_state) for the intel_powerclamp driver when this one is compiled as a module V3: - Add missing cpuidle.h header --- drivers/cpuidle/cpuidle.c | 1 + drivers/powercap/idle_inject.c | 4 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +++- include/linux/cpu.h | 2 +- kernel/sched/idle.c | 4 ++-- 5 files changed, 10 insertions(+), 5 deletions(-)drivers/cpuidle/cpuidle.c +0
-0drivers/cpuidle/cpuidle.c int cpuidle_find_deepest_state(void) · line 129
Quoted 4 lines
drivers/cpuidle/cpuidle.c +1
-0@@ -126,6 +126,7 @@ int cpuidle_find_deepest_state(void)return find_deepest_state (drv, dev,UINT_MAX ,0 , false); } +EXPORT_SYMBOL_GPL (cpuidle_find_deepest_state);That doesn't appear to be really necessary to me.
Quoted 16 lines
drivers/cpuidle/cpuidle.c +0
-0#ifdef CONFIG_SUSPEND static void enter_s2idle_proper(struct cpuidle_driver *drv,drivers/powercap/idle_inject.c +1
-0@@ -38,6 +38,7 @@#define pr_fmt (fmt) "ii_dev: " fmt#include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/hrtimer.h> #include <linux/kthread.h> #include <linux/sched.h> drivers/powercap/idle_inject.c static void idle_inject_fn(unsigned int cpu) · line 143
Quoted 6 lines
drivers/powercap/idle_inject.c +2
-1@@ -138,7 +139,8 @@ static void idle_inject_fn(unsigned int cpu)*/ iit->should_run =0 ; -play_idle (READ_ONCE (ii_dev->idle_duration_us)); +play_idle (READ_ONCE (ii_dev->idle_duration_us), +cpuidle_find_deepest_state ());The next patch changes this again and I'm not sure why this intermediate change is useful.
Quoted 19 lines
drivers/powercap/idle_inject.c +0
-0}/** drivers/thermal/intel/intel_powerclamp.c +1
-0@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h> @@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance;Quoted 8 lines
drivers/thermal/intel/intel_powerclamp.c static void clamp_idle_injection_func(struct kthread_work *work) · line 435
Quoted 3 lines
drivers/thermal/intel/intel_powerclamp.c +2
-1-play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ());I don't see a reason for changing the code here like this.
What you really need is to have a way to set a limit on the idle state exit latency for idle injection on ARM.
Mmh, yes you are right. The idle state number is part of the internals of the cpuidle framework while the exit latency is an input (from user or kernel).
Quoted 4 lines
For that you can pass the exit latency limit to
play_idle(), but then you need to change powerclamp to passUNIT_MAXor similar which is ugly, or you can redefinecpuidle_use_deepest_state()to take the exit latency limit as the arg (with 0 meaninguse_deepest_state== false).
Quoted 6 lines
Quoted 2 lines
Should it make sense to just get the resume latency in
cpuidle_use_deepest_state()and pass the value tofind_deepest_state()?Yes, I would change
cpuidle_use_deepest_state()to take the max exit latency as the arg (maybe with 0 meaning "don't use the deepest state only any more").
Why not simply ?
int cpuidle_find_deepest_state(struct cpuidle_driver *drv,
struct cpuidle_device *dev)
{
int latency = cpuidle_governor_latency_req(dev->cpu);
return find_deepest_state(drv, dev, latency_req, 0, false);
}Quoted 8 lines
Quoted 5 lines
It is the only code path where the constraint is not taken into account AFAICT.
With this simple change, we can manage everything from the
pm_qosAPI then and this series is no longer needed.OK
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Rafael J. Wysocki
maintainerRe: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
Quoted 120 lines · Daniel Lezcano
Quoted 109 lines · Rafael J. Wysocki
Quoted 107 lines · Daniel Lezcano
Quoted 87 lines · Rafael J. Wysocki
Quoted 34 lines · CET Daniel Lezcano
Currently, the
play_idlefunction does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.Export
cpuidle_find_deepest_state()symbol as it is used from theintel_powerclampdriver as a module.There is no functional changes, the cpuidle state is the deepest one.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Change variable name 'state' -> 'index':https://lkml.org/lkml/2019/10/28/874 V4: - Add EXPORT_SYMBOL_GPL(cpuidle_find_deepest_state) for the intel_powerclamp driver when this one is compiled as a module V3: - Add missing cpuidle.h header --- drivers/cpuidle/cpuidle.c | 1 + drivers/powercap/idle_inject.c | 4 +++- drivers/thermal/intel/intel_powerclamp.c | 4 +++- include/linux/cpu.h | 2 +- kernel/sched/idle.c | 4 ++-- 5 files changed, 10 insertions(+), 5 deletions(-)drivers/cpuidle/cpuidle.c +0
-0drivers/cpuidle/cpuidle.c int cpuidle_find_deepest_state(void) · line 129
Quoted 4 lines
drivers/cpuidle/cpuidle.c +1
-0@@ -126,6 +126,7 @@ int cpuidle_find_deepest_state(void)return find_deepest_state (drv, dev,UINT_MAX ,0 , false); } +EXPORT_SYMBOL_GPL (cpuidle_find_deepest_state);That doesn't appear to be really necessary to me.
Quoted 16 lines
drivers/cpuidle/cpuidle.c +0
-0#ifdef CONFIG_SUSPEND static void enter_s2idle_proper(struct cpuidle_driver *drv,drivers/powercap/idle_inject.c +1
-0@@ -38,6 +38,7 @@#define pr_fmt (fmt) "ii_dev: " fmt#include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/hrtimer.h> #include <linux/kthread.h> #include <linux/sched.h> drivers/powercap/idle_inject.c static void idle_inject_fn(unsigned int cpu) · line 143
Quoted 6 lines
drivers/powercap/idle_inject.c +2
-1@@ -138,7 +139,8 @@ static void idle_inject_fn(unsigned int cpu)*/ iit->should_run =0 ; -play_idle (READ_ONCE (ii_dev->idle_duration_us)); +play_idle (READ_ONCE (ii_dev->idle_duration_us), +cpuidle_find_deepest_state ());The next patch changes this again and I'm not sure why this intermediate change is useful.
Quoted 19 lines
drivers/powercap/idle_inject.c +0
-0}/** drivers/thermal/intel/intel_powerclamp.c +1
-0@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h> @@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance;Quoted 8 lines
drivers/thermal/intel/intel_powerclamp.c static void clamp_idle_injection_func(struct kthread_work *work) · line 435
Quoted 3 lines
drivers/thermal/intel/intel_powerclamp.c +2
-1-play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ());I don't see a reason for changing the code here like this.
What you really need is to have a way to set a limit on the idle state exit latency for idle injection on ARM.
Mmh, yes you are right. The idle state number is part of the internals of the cpuidle framework while the exit latency is an input (from user or kernel).
Quoted 4 lines
For that you can pass the exit latency limit to
play_idle(), but then you need to change powerclamp to passUNIT_MAXor similar which is ugly, or you can redefinecpuidle_use_deepest_state()to take the exit latency limit as the arg (with 0 meaninguse_deepest_state== false).Quoted 6 lines
Quoted 2 lines
Should it make sense to just get the resume latency in
cpuidle_use_deepest_state()and pass the value tofind_deepest_state()?Yes, I would change
cpuidle_use_deepest_state()to take the max exit latency as the arg (maybe with 0 meaning "don't use the deepest state only any more").Why not simply ?
Quoted 7 lines
int cpuidle_find_deepest_state(struct
cpuidle_driver*drv,
structcpuidle_device*dev){ int latency = cpuidle_governor_latency_req(dev->cpu); return find_deepest_state(drv, dev, latency_req, 0, false); }
Because, AFAICS, that doesn't work for powerclamp.
Re: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
In reply to Rafael J. WysockiQuoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · CET Daniel Lezcano
Currently, the
play_idlefunction does not allow to tell which idle state we want to go. Improve this by passing the idle state as parameter to the function.Export
cpuidle_find_deepest_state()symbol as it is used from theintel_powerclampdriver as a module.
[ ... ]
Quoted 23 lines
Quoted 14 lines
/**
drivers/thermal/intel/intel_powerclamp.c +1
-0@@ -29,6 +29,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/cpu.h> +#include <linux/cpuidle.h> #include <linux/thermal.h> #include <linux/slab.h> #include <linux/tick.h> drivers/thermal/intel/intel_powerclamp.c static void clamp_idle_injection_func(struct kthread_work *work) · line 435
Quoted 6 lines
drivers/thermal/intel/intel_powerclamp.c +2
-1@@ -430,7 +431,8 @@ static void clamp_idle_injection_func(struct kthread_work *work)if (should_skip) goto balance; -play_idle (jiffies_to_usecs (w_data->duration_jiffies)); +play_idle (jiffies_to_usecs (w_data->duration_jiffies), +cpuidle_find_deepest_state ());I don't see a reason for changing the code here like this.
Quoted 7 lines
What you really need is to have a way to set a limit on the idle state exit latency for idle injection on ARM.
For that you can pass the exit latency limit to
play_idle(), but then you need to change powerclamp to passUNIT_MAXor similar which is ugly, or you can redefinecpuidle_use_deepest_state()to take the exit latency limit as the arg (with 0 meaninguse_deepest_state== false).
I'm confused with the "... ugly, *or* ...". In any case we have to specify a latency constraint to play_idle(), no?
Quoted 4 lines
In the latter case, it would be quite straightforward to add an
exit_latencyargument tocpuidle_find_deepest_state()and note thatfind_deepest_state()takes amax_latencyarg already, so that would be a trivial change (hint!).
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
In reply to Daniel Lezcanohi Daniel,
Since there's been quite some changes in cpuidle recently, how's your plans to move this patchset forward? I, at least, need it.
thanks for that,
martin
Re: [PATCH V6 2/3] cpuidle: play_idle: Specify play_idle with an idle state
Quoted 4 lines · Martin Kepplinger
hi Daniel,
Since there's been quite some changes in cpuidle recently, how's your plans to move this patchset forward? I, at least, need it.
This series was merged but instead of specifying an idle state, we specify an exit latency [1].
The cooling device itself is at V4 with some review tags. It should be merged soon [2].
-- Daniel
[2] https://lkml.org/lkml/2019/12/4/563
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v6 3/3 powercap/drivers/idle_inject: Specify the idle state to inject
In reply to Daniel LezcanoCurrently the idle injection framework only allows to inject the deepest idle state available on the system.
Give the opportunity to specify which idle state we want to inject by adding a new function helper to set the state and use it when calling play_idle().
---
V6:
- Rename variable name 'state' -> 'state_idx':
https://lkml.org/lkml/2019/10/28/874 --- drivers/powercap/idle_inject.c | 14 +++++++++++++- include/linux/idle_inject.h | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-)
drivers/powercap/idle_inject.c +13 -1
@@ -66,6 +66,7 @@ struct idle_inject_thread {*/ struct idle_inject_device {struct hrtimer timer; +int state_idx;unsigned int idle_duration_us;unsigned int run_duration_us;unsigned long int cpumask[0 ];
@@ -140,7 +141,7 @@ static void idle_inject_fn(unsigned int cpu) iit->should_run =0 ;play_idle (READ_ONCE (ii_dev->idle_duration_us), -cpuidle_find_deepest_state ()); +READ_ONCE (ii_dev->state_idx)); }/**
@@ -171,6 +172,16 @@ void idle_inject_get_duration(struct idle_inject_device *ii_dev, *idle_duration_us =READ_ONCE (ii_dev->idle_duration_us); } +/** +* idle_inject_set_state - set the idle state to inject +* @state: an integer for the idle state to inject +*/ +void idle_inject_set_state (struct idle_inject_device *ii_dev,int index) +{ +if (index >=CPUIDLE_STATE_NOUSE && index <CPUIDLE_STATE_MAX ) +WRITE_ONCE (ii_dev->state_idx, index); +} +/** * idle_inject_start - start idle injections * @ii_dev: idle injection control device structure
@@ -299,6 +310,7 @@ struct idle_inject_device *idle_inject_register(struct cpumask *cpumask)cpumask_copy (to_cpumask (ii_dev->cpumask), cpumask);hrtimer_init (&ii_dev->timer,CLOCK_MONOTONIC ,HRTIMER_MODE_REL ); ii_dev->timer.function = idle_inject_timer_fn; + ii_dev->state_idx =0 ;for_each_cpu (cpu,to_cpumask (ii_dev->cpumask)) {
include/linux/idle_inject.h +3 -0
@@ -26,4 +26,7 @@ void idle_inject_set_duration(struct idle_inject_device *ii_dev,void idle_inject_get_duration (struct idle_inject_device *ii_dev,unsigned int *run_duration_us,unsigned int *idle_duration_us); + +void idle_inject_set_state (struct idle_inject_device *ii_dev,int index); +#endif /* __IDLE_INJECT_H__ */
Signature · 1 line
2.17.1
Re: [PATCH V6 3/3] powercap/drivers/idle_inject: Specify the idle state to inject
Quoted 43 lines · CET Daniel Lezcano
Currently the idle injection framework only allows to inject the deepest idle state available on the system.
Give the opportunity to specify which idle state we want to inject by adding a new function helper to set the state and use it when calling
play_idle().Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Rename variable name 'state' -> 'state_idx':https://lkml.org/lkml/2019/10/28/874 --- drivers/powercap/idle_inject.c | 14 +++++++++++++- include/linux/idle_inject.h | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-)drivers/powercap/idle_inject.c +2
-1@@ -66,6 +66,7 @@ struct idle_inject_thread {*/ struct idle_inject_device {struct hrtimer timer; +int state_idx;unsigned int idle_duration_us;unsigned int run_duration_us;unsigned long int cpumask[0 ];@@ -140,7 +141,7 @@ static void idle_inject_fn(unsigned int cpu) iit->should_run =0 ;play_idle (READ_ONCE (ii_dev->idle_duration_us), -cpuidle_find_deepest_state ()); +READ_ONCE (ii_dev->state_idx)); }/** @@ -171,6 +172,16 @@ void idle_inject_get_duration(struct idle_inject_device *ii_dev, *idle_duration_us =READ_ONCE (ii_dev->idle_duration_us); }
drivers/powercap/idle_inject.c void idle_inject_get_duration(struct idle_inject_device *ii_dev, · line 183
Quoted 10 lines
drivers/powercap/idle_inject.c +9
-0+/** +* idle_inject_set_state - set the idle state to inject +* @state: an integer for the idle state to inject +*/ +void idle_inject_set_state (struct idle_inject_device *ii_dev,int index) +{ +if (index >=CPUIDLE_STATE_NOUSE && index <CPUIDLE_STATE_MAX ) +WRITE_ONCE (ii_dev->state_idx, index); +}
So whoever uses this interface, needs to know the idle states list as provided by the cpuidle driver for the given CPU, but what really needs to be specified here is the exit latency limit (which can be provided as a number in us or ns without knowing the state index).
Hi Rafael,
Quoted 19 lines · Daniel Lezcano
The
play_idlefunction has two users, the intel powerclamp and theidle_injection.The idle injection cooling device uses the function via the
idle_injectionpowercap's APIs. Unfortunately,play_idleis currently limited by the idle state depth: by default the deepest idle state is selected. On the ARM[64] platforms, most of the time it is the cluster idle state, the exit latency and the residency can be very high. That reduces the scope of the idle injection usage because the impact on the performances can be very significant.If the idle injection cycles can be done with a shallow state like a retention state, the cooling effect would eventually give similar results than the cpufreq cooling device.
In order to prepare the function to receive an idle state parameter, let's replace the '
use_deepest_state' boolean field with 'use_state' and use this value to enter the specific idle state.
Quoted 6 lines
The current code keeps the default behavior which is go to the deepest idle state.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>
Is it possible to merge this series so I can make some progress on upstreaming the idle cooling device which depends on these three patches?
Thanks
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 27 lines · CET Daniel Lezcano
Hi Rafael,
Quoted 22 lines · Daniel Lezcano
The
play_idlefunction has two users, the intel powerclamp and theidle_injection.The idle injection cooling device uses the function via the
idle_injectionpowercap's APIs. Unfortunately,play_idleis currently limited by the idle state depth: by default the deepest idle state is selected. On the ARM[64] platforms, most of the time it is the cluster idle state, the exit latency and the residency can be very high. That reduces the scope of the idle injection usage because the impact on the performances can be very significant.If the idle injection cycles can be done with a shallow state like a retention state, the cooling effect would eventually give similar results than the cpufreq cooling device.
In order to prepare the function to receive an idle state parameter, let's replace the '
use_deepest_state' boolean field with 'use_state' and use this value to enter the specific idle state.The current code keeps the default behavior which is go to the deepest idle state.
Quoted 6 lines
Quoted 3 lines
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>Is it possible to merge this series so I can make some progress on upstreaming the idle cooling device which depends on these three patches?
That would be possible if the series had no problems, but it appears to have some.
Let me reply to the patches.
Quoted 70 lines · CET Daniel Lezcano
The
play_idlefunction has two users, the intel powerclamp and theidle_injection.The idle injection cooling device uses the function via the
idle_injectionpowercap's APIs. Unfortunately,play_idleis currently limited by the idle state depth: by default the deepest idle state is selected. On the ARM[64] platforms, most of the time it is the cluster idle state, the exit latency and the residency can be very high. That reduces the scope of the idle injection usage because the impact on the performances can be very significant.If the idle injection cycles can be done with a shallow state like a retention state, the cooling effect would eventually give similar results than the cpufreq cooling device.
In order to prepare the function to receive an idle state parameter, let's replace the '
use_deepest_state' boolean field with 'use_state' and use this value to enter the specific idle state.The current code keeps the default behavior which is go to the deepest idle state.
Signed-off-by Daniel Lezcano <[email protected]>Acked-by Mathieu Poirier <[email protected]>Reviewed-by Ulf Hansson <[email protected]>---
V6:
- Changeuse_statevariable name byuse_state_idx:https://lkml.org/lkml/2019/10/28/874 V5: - Fix s2idle default idle state value: https://lkml.org/lkml/2019/10/15/522 --- drivers/cpuidle/cpuidle.c | 21 +++++++++++---------- include/linux/cpuidle.h | 13 ++++++------- kernel/sched/idle.c | 11 +++++++---- 3 files changed, 24 insertions(+), 21 deletions(-)drivers/cpuidle/cpuidle.c +6
-6@@ -99,31 +99,31 @@ static int find_deepest_state(struct cpuidle_driver *drv, }/** -* cpuidle_use_deepest_state - Set/clear governor override flag. -* @enable: New value of the flag. +* cpuidle_use_state - Force the cpuidle framework to enter an idle state. +* @state: An integer for an idle state * -* Set/unset the current CPU to use the deepest idle state (override governors -* going forward if set). +* Specify an idle state the cpuidle framework must step in and bypass +* the idle state selection process. */ -void cpuidle_use_deepest_state (bool enable) +void cpuidle_use_state (int index) {struct cpuidle_device *dev;preempt_disable (); dev =cpuidle_get_device ();if (dev) - dev->use_deepest_state = enable; + dev->use_state_idx = index;preempt_enable (); }/**
drivers/cpuidle/cpuidle.c static int find_deepest_state(struct cpuidle_driver *drv, · line 125
Quoted 10 lines
drivers/cpuidle/cpuidle.c +3
-4* cpuidle_find_deepest_state - Find the deepest available idle state. -* @drv: cpuidle driver for the given CPU. -* @dev: cpuidle device for the given CPU. */ -int cpuidle_find_deepest_state (struct cpuidle_driver *drv, -struct cpuidle_device *dev) +int cpuidle_find_deepest_state (void ) { +struct cpuidle_device *dev =cpuidle_get_device (); +struct cpuidle_driver *drv =cpuidle_get_cpu_driver (dev);
This is totally wasteful for the cpuidle_idle_call() use case.
Quoted 92 lines
drivers/cpuidle/cpuidle.c +2
-0+return find_deepest_state (drv, dev,UINT_MAX ,0 , false); }@@ -554,6 +554,7 @@ static void __cpuidle_unregister_device(struct cpuidle_device *dev)static void __cpuidle_device_init (struct cpuidle_device *dev) {memset (dev->states_usage,0 ,sizeof (dev->states_usage)); + dev->use_state_idx =CPUIDLE_STATE_NOUSE ; dev->last_residency =0 ; dev->next_hrtimer =0 ; }include/linux/cpuidle.h +6
-7@@ -15,6 +15,7 @@#include <linux/list.h> #include <linux/hrtimer.h> +#define CPUIDLE_STATE_NOUSE -1#define CPUIDLE_STATE_MAX 10#define CPUIDLE_NAME_LEN 16#define CPUIDLE_DESC_LEN 32@@ -80,11 +81,11 @@ struct cpuidle_driver_kobj;struct cpuidle_device {unsigned int registered:1 ;unsigned int enabled:1 ; -unsigned int use_deepest_state:1 ;unsigned int poll_time_limit:1 ;unsigned int cpu;ktime_t next_hrtimer; +int use_state_idx;int last_state_idx;int last_residency;u64 poll_limit_ns;@@ -203,19 +204,17 @@ static inline struct cpuidle_device *cpuidle_get_device(void) {return NULL; }#endif #ifdef CONFIG_CPU_IDLE -extern int cpuidle_find_deepest_state (struct cpuidle_driver *drv, -struct cpuidle_device *dev); +extern int cpuidle_find_deepest_state (void );extern int cpuidle_enter_s2idle (struct cpuidle_driver *drv,struct cpuidle_device *dev); -extern void cpuidle_use_deepest_state (bool enable); +extern void cpuidle_use_state (int index);#else -static inline int cpuidle_find_deepest_state (struct cpuidle_driver *drv, -struct cpuidle_device *dev) +static inline int cpuidle_find_deepest_state (void ) {return -ENODEV ; }static inline int cpuidle_enter_s2idle (struct cpuidle_driver *drv,struct cpuidle_device *dev) {return -ENODEV ; } -static inline void cpuidle_use_deepest_state (bool enable) +static inline void cpuidle_use_state (int index) { }#endif kernel/sched/idle.c +5
-2@@ -165,7 +165,8 @@ static void cpuidle_idle_call(void)* until a proper wakeup interrupt happens. */ -if (idle_should_enter_s2idle () || dev->use_deepest_state) { +if (idle_should_enter_s2idle () || + dev->use_state_idx !=CPUIDLE_STATE_NOUSE ) {if (idle_should_enter_s2idle ()) {rcu_idle_enter ();@@ -176,12 +177,14 @@ static void cpuidle_idle_call(void) }rcu_idle_exit (); + next_state =cpuidle_find_deepest_state (); + }else { + next_state = dev->use_state_idx; }tick_nohz_idle_stop_tick ();rcu_idle_enter (); - next_state =cpuidle_find_deepest_state (drv, dev);call_cpuidle (drv, dev, next_state); }else {bool stop_tick = true;
kernel/sched/idle.c void play_idle(unsigned long duration_us) · line 334
Quoted 5 lines
kernel/sched/idle.c +1
-1@@ -328,7 +331,7 @@ void play_idle(unsigned long duration_us)rcu_sleep_check ();preempt_disable (); current->flags |=PF_IDLE ; -cpuidle_use_deepest_state (true); +cpuidle_use_state (cpuidle_find_deepest_state ());
And this assumes that the deepest state will not change for the whole play_idle() duration, but what if it is disabled by user space in the meantime?
Quoted 13 lines
kernel/sched/idle.c +1
-1it.done =0 ;hrtimer_init_on_stack (&it.timer,CLOCK_MONOTONIC ,HRTIMER_MODE_REL );@@ -339,7 +342,7 @@ void play_idle(unsigned long duration_us)while (!READ_ONCE (it.done))do_idle (); -cpuidle_use_deepest_state (false); +cpuidle_use_state (CPUIDLE_STATE_NOUSE ); current->flags &= ~PF_IDLE ;preempt_fold_need_resched ();