Skip to contentSkip to conversation

ASoC: rt1011: add the range check for temperature_calib from device property

PATCH In review [email protected] 2 participants 2 messages Oct 31, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 4/5 ASoC: rt1011: add the range check for temperature_calib from device property

From: Shuming Fan <[email protected]>

The driver will check the range for temperature_calib. It should be from 1 to 255.

---
 sound/soc/codecs/rt1011.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/codecs/rt1011.c +2 -1
index 2f1de933f3ac..f2c581b66d32 100644
@@ -2341,7 +2341,8 @@ static void rt1011_calibration_work(struct work_struct *work)
 	rt1011_reg_init(component);
 
 	/* Apply temperature and calibration data from device property */
-	if (rt1011->temperature_calib) {
+	if (rt1011->temperature_calib <= 0xff &&
+		rt1011->temperature_calib > 0) {
 		snd_soc_component_update_bits(component,
 			RT1011_STP_INITIAL_RESISTANCE_TEMP, 0x3ff,
 			(rt1011->temperature_calib << 2));
Signature · 6 lines
2.23.0

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
maintainer
#1 lore raw

[alsa-devel] Applied "ASoC: rt1011: add the range check for temperature_calib from device property" to the asoc tree

The patch

ASoC: rt1011: add the range check for temperature_calib from device property

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 98b6b8df06c7929de65ca3bf28a13b11170943e3 Mon Sep 17 00:00:00 2001
From: Shuming Fan <[email protected]>
Date: Thu, 31 Oct 2019 19:54:36 +0800
Subject: [PATCH] ASoC: rt1011: add the range check for temperature_calib from
device property

The driver will check the range for temperature_calib. It should be from 1 to 255.

---
 sound/soc/codecs/rt1011.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/codecs/rt1011.c +2 -1
index 2f1de933f3ac..f2c581b66d32 100644
@@ -2341,7 +2341,8 @@ static void rt1011_calibration_work(struct work_struct *work)
 	rt1011_reg_init(component);
 
 	/* Apply temperature and calibration data from device property */
-	if (rt1011->temperature_calib) {
+	if (rt1011->temperature_calib <= 0xff &&
+		rt1011->temperature_calib > 0) {
 		snd_soc_component_update_bits(component,
 			RT1011_STP_INITIAL_RESISTANCE_TEMP, 0x3ff,
 			(rt1011->temperature_calib << 2));
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel