Skip to contentSkip to conversation

clk: ti: add clkctrl data dra7 sgx

PATCH Applied Tony Lindgren 2 participants 2 messages Nov 1, 2019 – Jan 21, 2020 1 message not in the archive

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clk: ti: add clkctrl data dra7 sgx

This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock.

Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes.

For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately.

Cc Benoit Parrot <[email protected]>
Cc "H. Nikolaus Schaller" <[email protected]>
Cc Robert Nelson <[email protected]>
Cc Tomi Valkeinen <[email protected]>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 14 +++++++++++
 drivers/clk/ti/clk-7xx.c             | 35 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/dra7.h     |  3 +++
 3 files changed, 52 insertions(+)
arch/arm/boot/dts/dra7xx-clocks.dtsi +14 -0
@@ -1734,6 +1734,20 @@
 		};
 	};
 
+	gpu_cm: gpu-cm@1200 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		gpu_clkctrl: gpu-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
 	l3init_cm: l3init-cm@1300 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1300 0x100>;
drivers/clk/ti/clk-7xx.c +35 -0
@@ -275,6 +275,40 @@ static const struct omap_clkctrl_reg_data dra7_dss_clkctrl_regs[] __initconst =
 	{ 0 },
 };
 
+static const char * const dra7_gpu_core_mux_parents[] __initconst = {
+	"dpll_core_h14x2_ck",
+	"dpll_per_h14x2_ck",
+	"dpll_gpu_m2_ck",
+	NULL,
+};
+
+static const char * const dra7_gpu_hyd_mux_parents[] __initconst = {
+	"dpll_core_h14x2_ck",
+	"dpll_per_h14x2_ck",
+	"dpll_gpu_m2_ck",
+	NULL,
+};
+
+static const char * const dra7_gpu_sys_clk_parents[] __initconst = {
+	"sys_clkin",
+	NULL,
+};
+
+static const struct omap_clkctrl_div_data dra7_gpu_sys_clk_data __initconst = {
+	.max_div = 2,
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpu_core_bit_data[] __initconst = {
+	{ 24, TI_CLK_MUX, dra7_gpu_core_mux_parents, NULL, },
+	{ 26, TI_CLK_MUX, dra7_gpu_hyd_mux_parents, NULL, },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_gpu_clkctrl_regs[] __initconst = {
+	{ DRA7_GPU_CLKCTRL, dra7_gpu_core_bit_data, CLKF_SW_SUP, "gpu_cm:clk:0000:24", },
+	{ 0 },
+};
+
 static const char * const dra7_mmc1_fclk_mux_parents[] __initconst = {
 	"func_128m_clk",
 	"dpll_per_m2x2_ck",
@@ -778,6 +812,7 @@ const struct omap_clkctrl_data dra7_clkctrl_data[] __initconst = {
 	{ 0x4a008d20, dra7_l4cfg_clkctrl_regs },
 	{ 0x4a008e20, dra7_l3instr_clkctrl_regs },
 	{ 0x4a009120, dra7_dss_clkctrl_regs },
+	{ 0x4a009220, dra7_gpu_clkctrl_regs },
 	{ 0x4a009320, dra7_l3init_clkctrl_regs },
 	{ 0x4a0093b0, dra7_pcie_clkctrl_regs },
 	{ 0x4a0093d0, dra7_gmac_clkctrl_regs },
include/dt-bindings/clock/dra7.h +3 -0
@@ -78,6 +78,9 @@
 #define DRA7_DSS_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 #define DRA7_BB2D_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
 
+/* gpu clocks */
+#define DRA7_GPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
+
 /* l3init clocks */
 #define DRA7_MMC1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 #define DRA7_MMC2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
Signature · 1 line
2.23.0

A message that is not in the archive (sent off-list or not yet received): [email protected]

Applied
#2 lore raw
Quoted 14 lines · Stephen Boyd

Quoting Tony Lindgren (2019-11-01 09:27:19)

Quoted 13 lines

This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock.

Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes.

For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately.

Quoted 9 lines
Quoted 6 lines
Cc Benoit Parrot <[email protected]>
Cc "H. Nikolaus Schaller" <[email protected]>
Cc Robert Nelson <[email protected]>
Cc Tomi Valkeinen <[email protected]>

---

Queued up towards 5.6, thanks.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki