FBTFT: Changed delay function.
Subsystems (2)
PATCH 1/1 FBTFT: Changed delay function.
Hi,
Changed udelay() to usleep_range() based on the document in the path, "Documentation/timers/timers-howto.rst". It was suggested to use usleep_range() function for sleeping duration between 10us - 20 ms. original code used udelay() for sleeping 20 us.
---drivers/staging/fbtft/fb_agm1264k-fl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/fbtft/fb_agm1264k-fl.c +1 -1
@@ -85,7 +85,7 @@ static void reset(struct fbtft_par *par)dev_dbg (par->info->device,"%s()\n" , __func__);gpiod_set_value (par->gpio.reset,0 ); -udelay (20 ); +usleep_range (20 ,20 );gpiod_set_value (par->gpio.reset,1 );mdelay (120 ); }
Signature · 6 lines
Signed-off-by: Rama Kumar <[email protected]> Thanks, Rama Kumar 2.17.1
Greg KH
maintainerQuoted 24 lines · Rama Kumar
Hi,
Changed
udelay()tousleep_range()based on the document in the path, "Documentation/timers/timers-howto.rst". It was suggested to useusleep_range()function for sleeping duration between 10us - 20 ms. original code usedudelay()for sleeping 20 us.---
drivers/staging/fbtft/fb_agm1264k-fl.c| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)drivers/staging/fbtft/fb_agm1264k-fl.c +1
-1@@ -85,7 +85,7 @@ static void reset(struct fbtft_par *par)dev_dbg (par->info->device,"%s()\n" , __func__);gpiod_set_value (par->gpio.reset,0 ); -udelay (20 ); +usleep_range (20 ,20 );gpiod_set_value (par->gpio.reset,1 );mdelay (120 ); }Signature · 1 line
Signed-off-by: Rama Kumar <[email protected]>
Always run checkptch.pl on patches you send out so you don't get grumpy maintainers telling you to run checkpatch.pl on your patch :)
thanks,
greg k-h