TopDown metrics support for Icelake
Subsystems (2)
v5 cover TopDown metrics support for Icelake
From: Kan Liang <[email protected]>
Icelake has support for measuring the level 1 TopDown metrics directly in hardware. This is implemented by an additional METRICS register, and a new Fixed Counter 3 that measures pipeline SLOTS.
New in Icelake
- Do not require generic counters. This allows to collect TopDown always in addition to other events.
- Measuring TopDown per thread/process instead of only per core
For the Ice Lake implementation of performance metrics, the values in PERF_METRICS MSR are derived from fixed counter 3. Software should start both registers, PERF_METRICS and fixed counter 3, from zero. Additionally, software is recommended to periodically clear both registers in order to maintain accurate measurements. The latter is required for certain scenarios that involve sampling metrics at high rates. Software should always write fixed counter 3 before write to PERF_METRICS.
IA32_PERF_GLOBAL_STATUS. OVF_PERF_METRICS[48]: If this bit is set, it indicates that some PERF_METRICS-related counter has overflowed and a PMI is triggered. Software has to synchronize, e.g. re-start, PERF_METRICS as well as fixed counter 3. Otherwise, PERF_METRICS may return invalid values.
Limitation
- To get accurate result and avoid reading the METRICS register multiple times, the TopDown metrics events and SLOTS event have to be in the same group.
- METRICS and SLOTS registers have to be cleared after each read by SW. That is to prevent the lose of precision.
- Cannot do sampling read SLOTS and TopDown metric events
Please refer SDM Vol3, 18.3.9.3 Performance Metrics for the details of TopDown metrics.
Changes since V4:
- Add description regarding to event-code naming for fixed counters
- Fix add_nr_metric_event().
For leader event, we have to take the accepted metrics events into account.
For sibling event, it doesn't need to count accepted metrics events again.
- Remove is_first_topdown_event_in_group().
Force slots in topdown group. Only update topdown events with slots event.
- Re-use last_period and period_left for saved_metric and saved_slots.
Changes since V3:
- Separate fixed counter3 definition patch
- Separate BTS index patch
- Apply Peter's cleanup patch
- Fix the name of perf capabilities for perf METRICS
- Apply patch for mul_u64_u32_div() x86_64 implementation
- Fix unconditionally allows collecting 4 extra events
- Add patch to clean up NMI handler by naming global status bit
- Add patch to reuse event_base_rdpmc for RDPMC userspace support
Changes since V2:
- Rebase on top of v5.3-rc1
Key changes since V1:
- Remove variables for reg_idx and enabled_events[] array. The reg_idx can be calculated by idx in runtime.
Using existing active_mask to replace enabled_events.
- Choose value 47 for the fixed index of BTS.
- Support OVF_PERF_METRICS overflow bit in PMI handler
- Drops the caching mechanism and related variables
New mechanism is to update all active slots/metrics events for the first slots/metrics events in a group. For each group reading, it still only read the slots/perf_metrics MSR once
- Disable PMU for read of topdown events to avoid the NMI issue
- Move RDPMC support to a separate patch
- Using event=0x00,umask=0x1X for topdown metrics events
- Drop the patch which add REMOVE transaction
We can indicate x86_pmu_stop() by checking
(event && !test_bit(event->hw.idx, cpuc->active_mask)), which is a good place to save the slots/metrics MSR value
Andi Kleen (2):
perf, tools, stat: Support new per thread TopDown metrics perf, tools: Add documentation for topdown metrics
Kan Liang (12):
perf/x86/intel: Introduce the fourth fixed counter perf/x86/intel: Set correct mask for TOPDOWN.SLOTS perf/x86/intel: Move BTS index to 47
perf/x86/intel: Basic support for metrics counters perf/x86/intel: Fix the name of perf capabilities for perf METRICS perf/x86/intel: Support hardware TopDown metrics perf/x86/intel: Support per thread RDPMC TopDown metrics perf/x86/intel: Export TopDown events for Icelake perf/x86/intel: Disable sampling read slots and topdown perf/x86/intel: Name global status bit in NMI handler perf/x86: Use event_base_rdpmc for RDPMC userspace support perf, tools, stat: Check Topdown Metric group
arch/x86/events/core.c | 86 +++++- arch/x86/events/intel/core.c | 399 ++++++++++++++++++++++--- arch/x86/events/perf_event.h | 57 +++- arch/x86/include/asm/msr-index.h | 3 + arch/x86/include/asm/perf_event.h | 60 +++- include/linux/perf_event.h | 29 +- tools/perf/Documentation/perf-stat.txt | 9 +- tools/perf/Documentation/topdown.txt | 235 +++++++++++++++ tools/perf/builtin-stat.c | 97 ++++++ tools/perf/util/stat-shadow.c | 89 ++++++ tools/perf/util/stat.c | 4 + tools/perf/util/stat.h | 8 + 12 files changed, 1007 insertions(+), 69 deletions(-) create mode 100644 tools/perf/Documentation/topdown.txt
Signature · 1 line
2.17.1
PATCH v5 1/14 perf/x86/intel: Introduce the fourth fixed counter
From: Kan Liang <[email protected]>
The fourth fixed counter, TOPDOWN.SLOTS, is introduced in Ice Lake.
Add MSR address and macros for the new fixed counter, which will be used in the following patch.
Add comments to explain the event encoding rules for fixed counters.
---
Changes since V4:
- Add description regarding to event-code naming for fixed counters
arch/x86/include/asm/perf_event.h | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
arch/x86/include/asm/perf_event.h +18 -3
@@ -146,12 +146,22 @@ struct x86_pmu_capability {*/ /* -* All 3 fixed-mode PMCs are configured via this single MSR: +* All fixed-mode PMCs are configured via this single MSR: */ #define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d/* -* The counts are available in three separate MSRs: +* There is no event-code assigned to fixed-mode PMCs. +* For the fixed-mode PMC which has an equivalent event on general-purpose PMCs, +* using the event-code of the equivalent event for the fixed-mode PMC. +* E.g. Instr_Retired.Any, CPU_CLK_Unhalted.Core +* +* For the fixed-mode PMCs which doesn't have an equivalent event, +* using pseudo-encoding, e.g. CPU_CLK_Unhalted.Ref, TOPDOWN.SLOTS. +* The event-code for fixed-mode PMCs must be 0x00. +* The umask-code is 0x0X. X indicates the index of the fixed counter. +* +* The counts are available in separate MSRs: */ /* Instr_Retired.Any: */
@@ -162,11 +172,16 @@ struct x86_pmu_capability {#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a#define INTEL_PMC_IDX_FIXED_CPU_CYCLES (INTEL_PMC_IDX_FIXED + 1) -/* CPU_CLK_Unhalted.Ref: */ +/* CPU_CLK_Unhalted.Ref: event=0x00,umask=0x3 (pseudo-encoding) */ #define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b#define INTEL_PMC_IDX_FIXED_REF_CYCLES (INTEL_PMC_IDX_FIXED + 2)#define INTEL_PMC_MSK_FIXED_REF_CYCLES (1ULL << INTEL_PMC_IDX_FIXED_REF_CYCLES) +/* TOPDOWN.SLOTS: event=0x00,umask=0x4 (pseudo-encoding) */ +#define MSR_ARCH_PERFMON_FIXED_CTR3 0x30c +#define INTEL_PMC_IDX_FIXED_SLOTS (INTEL_PMC_IDX_FIXED + 3) +#define INTEL_PMC_MSK_FIXED_SLOTS (1ULL << INTEL_PMC_IDX_FIXED_SLOTS) +/* * We model BTS tracing as another fixed-mode PMC. *
Signature · 1 line
2.17.1
PATCH v5 2/14 perf/x86/intel: Set correct mask for TOPDOWN.SLOTS
In reply to [email protected]From: Kan Liang <[email protected]>
TOPDOWN.SLOTS(0x0400) is not a generic event. It is only available on fixed counter3.
Don't extend its mask to generic counters.
---
No changes since V4
arch/x86/events/intel/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/x86/events/intel/core.c +4 -2
@@ -5118,12 +5118,14 @@ __init int intel_pmu_init(void)if (x86_pmu.event_constraints) {/* -* event on fixed counter2 (REF_CYCLES) only works on this +* event on fixed counter2 (REF_CYCLES) and +* fixed counter3 (TOPDOWN.SLOTS) only work on this * counter, so do not extend mask to generic counters */ for_each_event_constraint (c, x86_pmu.event_constraints) {if (c->cmask ==FIXED_EVENT_FLAGS - && c->idxmsk64 !=INTEL_PMC_MSK_FIXED_REF_CYCLES ) { + && c->idxmsk64 !=INTEL_PMC_MSK_FIXED_REF_CYCLES + && c->idxmsk64 !=INTEL_PMC_MSK_FIXED_SLOTS ) { c->idxmsk64 |= (1ULL << x86_pmu.num_counters) -1 ; } c->idxmsk64 &=
Signature · 1 line
2.17.1
PATCH v5 3/14 perf/x86/intel: Move BTS index to 47
In reply to [email protected]From: Kan Liang <[email protected]>
The bit 48 in the PERF_GLOBAL_STATUS is used to indicate the overflow status of PERF_METRICS counters now.
Move BTS index to 47.
---
No changes since V4
arch/x86/include/asm/perf_event.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/include/asm/perf_event.h +2 -2
@@ -185,11 +185,11 @@ struct x86_pmu_capability {/* * We model BTS tracing as another fixed-mode PMC. * -* We choose a value in the middle of the fixed event range, since lower +* We choose value 47 for the fixed index of BTS, since lower * values are used by actual fixed events and higher values are used * to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr. */ -#define INTEL_PMC_IDX_FIXED_BTS (INTEL_PMC_IDX_FIXED + 16) +#define INTEL_PMC_IDX_FIXED_BTS (INTEL_PMC_IDX_FIXED + 15)#define GLOBAL_STATUS_COND_CHG BIT_ULL(63)#define GLOBAL_STATUS_BUFFER_OVF BIT_ULL(62)
Signature · 1 line
2.17.1
PATCH v5 4/14 perf/x86/intel: Basic support for metrics counters
In reply to [email protected]From: Kan Liang <[email protected]>
Metrics counters (hardware counters containing multiple metrics) are modeled as separate registers for each TopDown metric events, with an extra reg being used for coordinating access to the underlying register in the scheduler.
Adds the basic infrastructure to separate the scheduler register indexes from the actual hardware register indexes. In most cases the MSR address is already used correctly, but for code using indexes we need calculate the correct underlying register.
The TopDown metric events share the fixed counter 3. It only needs enable/disable once for them.
Naming:
The events which uses Metrics counters are called TopDown metric events or metric events in the code.
The fixed counter 3 is called TopDown slots event or slots event. Topdown events stand for metric events + slots event in the code.
Thank Peter Zijlstra very much to clean up the patch. All the topdown support has been properly placed in the fixed counter functions. So the is_topdown_idx() only need to be check once. Also, clean up the x86_assign_hw_event() by converting multiple if-else statements to a switch statement.
---
No changes since V4
arch/x86/events/core.c | 23 ++++++-- arch/x86/events/intel/core.c | 98 ++++++++++++++++++++++--------- arch/x86/events/perf_event.h | 14 +++++ arch/x86/include/asm/msr-index.h | 1 + arch/x86/include/asm/perf_event.h | 28 +++++++++ 5 files changed, 129 insertions(+), 35 deletions(-)
arch/x86/events/core.c +17 -6
@@ -1054,22 +1054,33 @@ static inline void x86_assign_hw_event(struct perf_event *event, struct cpu_hw_events *cpuc, int i) {struct hw_perf_event *hwc = &event->hw; +int idx; - hwc->idx = cpuc->assign[i]; + idx = hwc->idx = cpuc->assign[i]; hwc->last_cpu =smp_processor_id (); hwc->last_tag = ++cpuc->tags[i]; -if (hwc->idx ==INTEL_PMC_IDX_FIXED_BTS ) { +switch (hwc->idx) { +case INTEL_PMC_IDX_FIXED_BTS : hwc->config_base =0 ; hwc->event_base =0 ; - }else if (hwc->idx >=INTEL_PMC_IDX_FIXED ) { +break ; + + case INTEL_PMC_IDX_FIXED_METRIC_BASE ... INTEL_PMC_IDX_FIXED_METRIC_BASE + 3: +/* All METRIC events are mapped onto the fixed SLOTS event */ + idx =INTEL_PMC_IDX_FIXED_SLOTS ; +/* fall through */ + case INTEL_PMC_IDX_FIXED ... INTEL_PMC_IDX_FIXED_BTS - 1: hwc->config_base =MSR_ARCH_PERFMON_FIXED_CTR_CTRL ; - hwc->event_base =MSR_ARCH_PERFMON_FIXED_CTR0 + (hwc->idx -INTEL_PMC_IDX_FIXED ); - hwc->event_base_rdpmc = (hwc->idx -INTEL_PMC_IDX_FIXED ) |1 <<30 ; - }else { + hwc->event_base =MSR_ARCH_PERFMON_FIXED_CTR0 + (idx -INTEL_PMC_IDX_FIXED ); + hwc->event_base_rdpmc = (idx -INTEL_PMC_IDX_FIXED ) |1 <<30 ; +break ; + +default : hwc->config_base =x86_pmu_config_addr (hwc->idx); hwc->event_base =x86_pmu_event_addr (hwc->idx); hwc->event_base_rdpmc =x86_pmu_rdpmc_index (hwc->idx); +break ; } }
arch/x86/events/intel/core.c +69 -29
158 lines not on this page · raw message
arch/x86/events/perf_event.h +14 -0
@@ -356,6 +356,20 @@ struct cpu_hw_events {#define FIXED_EVENT_CONSTRAINT (c, n) \ EVENT_CONSTRAINT(c, (1ULL << (32+n)), FIXED_EVENT_FLAGS) +/* +* Special metric counters do not actually exist, but get remapped +* to a combination of FxCtr3 + MSR_PERF_METRICS +* +* This allocates them to a dummy offset for the scheduler. +* This does not allow sharing of multiple users of the same +* metric without multiplexing, even though the hardware supports that +* in principle. +*/ + +#define METRIC_EVENT_CONSTRAINT (c, n) \ + EVENT_CONSTRAINT(c, (1ULL << (INTEL_PMC_IDX_FIXED_METRIC_BASE+n)), \ + FIXED_EVENT_FLAGS) +/* * Constraint on the Event code + UMask */
arch/x86/include/asm/msr-index.h +1 -0
@@ -799,6 +799,7 @@#define MSR_CORE_PERF_FIXED_CTR0 0x00000309#define MSR_CORE_PERF_FIXED_CTR1 0x0000030a#define MSR_CORE_PERF_FIXED_CTR2 0x0000030b +#define MSR_CORE_PERF_FIXED_CTR3 0x0000030c#define MSR_CORE_PERF_FIXED_CTR_CTRL 0x0000038d#define MSR_CORE_PERF_GLOBAL_STATUS 0x0000038e#define MSR_CORE_PERF_GLOBAL_CTRL 0x0000038f
arch/x86/include/asm/perf_event.h +28 -0
@@ -191,6 +191,34 @@ struct x86_pmu_capability {*/ #define INTEL_PMC_IDX_FIXED_BTS (INTEL_PMC_IDX_FIXED + 15) +/* +* We model PERF_METRICS as more magic fixed-mode PMCs, one for each metric +* +* Internally they all map to Fixed Ctr 3 (SLOTS), and allocate PERF_METRICS +* as an extra_reg. PERF_METRICS has no own configuration, but we fill in +* the configuration of FxCtr3 to enforce that all the shared users of SLOTS +* have the same configuration. +*/ +#define INTEL_PMC_IDX_FIXED_METRIC_BASE (INTEL_PMC_IDX_FIXED + 16) +#define INTEL_PMC_IDX_TD_RETIRING (INTEL_PMC_IDX_FIXED_METRIC_BASE + 0) +#define INTEL_PMC_IDX_TD_BAD_SPEC (INTEL_PMC_IDX_FIXED_METRIC_BASE + 1) +#define INTEL_PMC_IDX_TD_FE_BOUND (INTEL_PMC_IDX_FIXED_METRIC_BASE + 2) +#define INTEL_PMC_IDX_TD_BE_BOUND (INTEL_PMC_IDX_FIXED_METRIC_BASE + 3) +#define INTEL_PMC_MSK_TOPDOWN ((0xfull << INTEL_PMC_IDX_FIXED_METRIC_BASE) | \ + INTEL_PMC_MSK_FIXED_SLOTS) + +static inline bool is_metric_idx (int idx) +{ +return (unsigned )(idx -INTEL_PMC_IDX_FIXED_METRIC_BASE ) <4 ; +} + +static inline bool is_topdown_idx (int idx) +{ +return is_metric_idx (idx) || idx ==INTEL_PMC_IDX_FIXED_SLOTS ; +} + +#define INTEL_PMC_OTHER_TOPDOWN_BITS (bit) (~(0x1ull << bit) & INTEL_PMC_MSK_TOPDOWN) +#define GLOBAL_STATUS_COND_CHG BIT_ULL(63)#define GLOBAL_STATUS_BUFFER_OVF BIT_ULL(62)#define GLOBAL_STATUS_UNC_OVF BIT_ULL(61)
Signature · 1 line
2.17.1
PATCH v5 5/14 perf/x86/intel: Fix the name of perf capabilities for perf METRICS
In reply to [email protected]From: Kan Liang <[email protected]>
Bit 15 of PERF_CAPABILITIES MSR indicates this architecture provides built in support for perf METRICS. The perf METRICS is not a PEBS feature.
Rename pebs_metrics_available perf_metrics.
No one use the bit in current code. The following patch will use it.
---
No changes since V4
arch/x86/events/perf_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/events/perf_event.h +1 -1
@@ -532,7 +532,7 @@ union perf_capabilities {*/ u64 full_width_write:1; u64 pebs_baseline:1; - u64 pebs_metrics_available:1; + u64 perf_metrics:1; u64 pebs_output_pt_available:1; };u64 capabilities;
Signature · 1 line
2.17.1
PATCH v5 6/14 perf/x86/intel: Support hardware TopDown metrics
In reply to [email protected]From: Kan Liang <[email protected]>
Intro
=====
Icelake has support for measuring the four top level TopDown metrics directly in hardware. This is implemented by an additional "metrics" register, and a new Fixed Counter 3 that measures pipeline "slots".
Events
======
We export four metric events as separate perf events, which map to internal "metrics" counter register. Those events do not exist in hardware, but can be allocated by the scheduler.
For the event mapping we use a special 0x00 event code, which is reserved for fake events. The metric events start from umask 0x10.
When setting up such events they point to the slots counter, and a special callback, update_topdown_event(), reads the additional metrics msr to generate the metrics. Then the metric is reported by multiplying the metric (fraction) with slots.
This multiplication allows to easily keep a running count, for example when the slots counter overflows, and makes all the standard tools, such as a perf stat, work. They can do deltas of the values without needing to know about fraction. This also simplifies accumulating the counts of child events, which otherwise would need to know how to average fraction values.
All four metric events don't support sampling. Since they will be handled specially for event update, a flag PERF_X86_EVENT_TOPDOWN is introduced to indicate this case.
The slots event can support both sampling and counting. For counting, the flag is also applied.
For sampling, it will be handled normally as other normal events.
Groups
======
The slots event is required in a Topdown group.
To avoid reading the METRICS register multiple times, the metrics and slots value can only be updated by slots event in a group. All active slots and metrics events will be updated one time.
Reset
======
For the Ice Lake implementation of performance metrics, the values in PERF_METRICS MSR are derived from fixed counter 3. Software should start both registers, PERF_METRICS and fixed counter 3, from zero. Additionally, software is recommended to periodically clear both registers in order to maintain accurate measurements. The latter is required for certain scenarios that involve sampling metrics at high rates. Software should always write fixed counter 3 before write to PERF_METRICS.
NMI
======
The METRICS related register may be overflow. The bit 48 of STATUS register will be set. If so, PERF_METRICS and Fixed counter 3 are required to be reset. The patch also update all active slots and metrics events in NMI handler.
The update_topdown_event() has to read two registers separately. The values may be modify by a NMI. PMU has to be disabled before calling the function.
RDPMC
======
RDPMC is temporarily disabled. The following patch will enable it.
---
Changes since V4
- Fix add_nr_metric_event().
For leader event, we have to take the accepted metrics events into account.
For sibling event, it doesn't need to count accepted metrics events again.
- Remove is_first_topdown_event_in_group().
Force slots in topdown group. Only update topdown events with slots event.
arch/x86/events/core.c | 44 +++++++ arch/x86/events/intel/core.c | 192 ++++++++++++++++++++++++++++++- arch/x86/events/perf_event.h | 39 +++++++ arch/x86/include/asm/msr-index.h | 2 + 4 files changed, 273 insertions(+), 4 deletions(-)
arch/x86/events/core.c +44 -0
@@ -76,6 +76,9 @@ u64 x86_perf_event_update(struct perf_event *event)if (idx ==INTEL_PMC_IDX_FIXED_BTS )return 0 ; +/* Specially handle the counting of Topdown slots/metrics */ +if (unlikely (is_topdown_count (event)) && x86_pmu.update_topdown_event) +return x86_pmu.update_topdown_event (event);/* * Careful: an NMI might modify the previous event value. *
@@ -992,6 +995,32 @@ int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)return unsched ? -EINVAL :0 ; } +static int add_nr_metric_event (struct cpu_hw_events *cpuc, +struct perf_event *event, +int *max_count,bool sibling) +{ +/* There are 4 TopDown metrics events. */ +if (is_metric_event (event) && (++cpuc->n_metric_event >4 )) +return -EINVAL ; + +/* +* Take the accepted metrics events into account for leader event. +*/ +if (!sibling) + *max_count += cpuc->n_metric_event; +else if (is_metric_event (event)) + (*max_count)++; + +return 0 ; +} + +static void del_nr_metric_event (struct cpu_hw_events *cpuc, +struct perf_event *event) +{ +if (is_metric_event (event)) + cpuc->n_metric_event--; +} +/* * dogrp: true if must collect siblings events (group) * returns total number of events and error code
@@ -1027,6 +1056,10 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, cpuc->pebs_output =is_pebs_pt (leader) +1 ; } +if (x86_pmu.intel_cap.perf_metrics && +add_nr_metric_event (cpuc, leader, &max_count, false)) +return -EINVAL ; +if (is_x86_event (leader)) {if (n >= max_count)return -EINVAL ;
@@ -1041,6 +1074,10 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, event->state <= PERF_EVENT_STATE_OFF)continue ; +if (x86_pmu.intel_cap.perf_metrics && +add_nr_metric_event (cpuc, event, &max_count, true)) +return -EINVAL ; +if (n >= max_count)return -EINVAL ;
@@ -1204,6 +1241,11 @@ int x86_perf_event_set_period(struct perf_event *event)if (idx ==INTEL_PMC_IDX_FIXED_BTS )return 0 ; +/* Specially handle the counting of Topdown slots/metrics */ +if (unlikely (is_topdown_count (event)) && + x86_pmu.set_topdown_event_period) +return x86_pmu.set_topdown_event_period (event); +/* * If we are way outside a reasonable range then just skip forward: */
@@ -1481,6 +1523,8 @@ static void x86_pmu_del(struct perf_event *event, int flags) } cpuc->event_constraint[i-1 ] =NULL ; --cpuc->n_events; +if (x86_pmu.intel_cap.perf_metrics) +del_nr_metric_event (cpuc, event);perf_event_update_userpage (event);
arch/x86/events/intel/core.c +188 -4
244 lines not on this page · raw message
arch/x86/events/perf_event.h +39 -0
@@ -40,6 +40,7 @@ enum extra_reg_type {EXTRA_REG_LBR =2 ,/* lbr_select */ EXTRA_REG_LDLAT =3 ,/* ld_lat_threshold */ EXTRA_REG_FE =4 ,/* fe_* */ +EXTRA_REG_TOPDOWN =5 ,/* Topdown slots/metrics */ EXTRA_REG_MAX /* number of entries needed */ };
@@ -77,6 +78,29 @@ static inline bool constraint_match(struct event_constraint *c, u64 ecode)#define PERF_X86_EVENT_AUTO_RELOAD 0x0200/* use PEBS auto-reload */ #define PERF_X86_EVENT_LARGE_PEBS 0x0400/* use large PEBS */ #define PERF_X86_EVENT_PEBS_VIA_PT 0x0800/* use PT buffer for PEBS */ +#define PERF_X86_EVENT_TOPDOWN 0x1000/* Count Topdown slots/metrics events */ + +static inline bool is_topdown_count (struct perf_event *event) +{ +return event->hw.flags &PERF_X86_EVENT_TOPDOWN ; +} + +static inline bool is_metric_event (struct perf_event *event) +{ +return ((event->attr.config &ARCH_PERFMON_EVENTSEL_EVENT ) ==0 ) && + ((event->attr.config &INTEL_ARCH_EVENT_MASK ) >=0x1000 ) && + ((event->attr.config &INTEL_ARCH_EVENT_MASK ) <=0x1300 ); +} + +static inline bool is_slots_event (struct perf_event *event) +{ +return (event->attr.config &INTEL_ARCH_EVENT_MASK ) ==0x0400 ; +} + +static inline bool is_topdown_event (struct perf_event *event) +{ +return is_metric_event (event) ||is_slots_event (event); +}struct amd_nb {int nb_id;/* NorthBridge id */
@@ -266,6 +290,12 @@ struct cpu_hw_events {*/ u64 tfa_shadow; +/* +* Perf Metrics +*/ +/* number of accepted metrics events */ +int n_metric_event; +/* * AMD specific bits */
@@ -517,6 +547,9 @@ struct extra_reg { 0xffff, \ LDLAT) +#define INTEL_UEVENT_TOPDOWN_EXTRA_REG (event) \ + EVENT_EXTRA_REG(event, 0, 0xfcff, -1L, TOPDOWN) +#define EVENT_EXTRA_END EVENT_EXTRA_REG(0, 0, 0, 0, RSP_0)union perf_capabilities {
@@ -696,6 +729,12 @@ struct x86_pmu {*/ atomic_t lbr_exclusive[x86_lbr_exclusive_max]; +/* +* Intel perf metrics +*/ +u64 (*update_topdown_event)(struct perf_event *event); +int (*set_topdown_event_period)(struct perf_event *event); +/* * perf task context (i.e. struct perf_event_context::task_ctx_data) * switch helper to bridge calls from perf/core to perf/x86.
arch/x86/include/asm/msr-index.h +2 -0
@@ -118,6 +118,8 @@#define MSR_TURBO_RATIO_LIMIT1 0x000001ae#define MSR_TURBO_RATIO_LIMIT2 0x000001af +#define MSR_PERF_METRICS 0x00000329 +#define MSR_LBR_SELECT 0x000001c8#define MSR_LBR_TOS 0x000001c9#define MSR_LBR_NHM_FROM 0x00000680
Signature · 1 line
2.17.1
PATCH v5 7/14 perf/x86/intel: Support per thread RDPMC TopDown metrics
In reply to [email protected]From: Kan Liang <[email protected]>
With Ice Lake CPUs, the TopDown metrics are directly available as fixed counters and do not require generic counters, which make it possible to measure TopDown per thread/process instead of only per core.
The metrics and slots values have to be saved/restored during context switching.
The saved values are also used as previous values to calculate the delta.
The PERF_METRICS MSR value will be returned if RDPMC metrics events.
Re-use last_period and period_left, which are unused sampling fields, for saved_metric and saved_slots.
---
Changes since V4:
- Re-use last_period and period_left for saved_metric and saved_slots.
arch/x86/events/core.c | 5 +- arch/x86/events/intel/core.c | 103 +++++++++++++++++++++++++++++------ include/linux/perf_event.h | 29 ++++++---- 3 files changed, 108 insertions(+), 29 deletions(-)
arch/x86/events/core.c +4 -1
@@ -2204,7 +2204,10 @@ static int x86_pmu_event_idx(struct perf_event *event)if (!(event->hw.flags &PERF_X86_EVENT_RDPMC_ALLOWED ))return 0 ; -if (x86_pmu.num_counters_fixed && idx >=INTEL_PMC_IDX_FIXED ) { +/* Return PERF_METRICS MSR value for metrics event */ +if (is_metric_idx (idx)) + idx =1 <<29 ; +else if (x86_pmu.num_counters_fixed && idx >=INTEL_PMC_IDX_FIXED ) { idx -=INTEL_PMC_IDX_FIXED ; idx |=1 <<30 ; }
arch/x86/events/intel/core.c +85 -18
146 lines not on this page · raw message
include/linux/perf_event.h +19 -10
@@ -200,17 +200,26 @@ struct hw_perf_event {*/ u64 sample_period; -/* -* The period we started this sample with. -*/ -u64 last_period; +union { +struct {/* Sampling */ +/* +* The period we started this sample with. +*/ +u64 last_period; -/* -* However much is left of the current period; note that this is -* a full 64bit value and allows for generation of periods longer -* than hardware might allow. -*/ -local64_t period_left; +/* +* However much is left of the current period; +* note that this is a full 64bit value and +* allows for generation of periods longer +* than hardware might allow. +*/ +local64_t period_left; + }; +struct {/* Topdown events counting for context switch */ +u64 saved_metric; +u64 saved_slots; + }; + };/* * State for throttling the event, see __perf_event_overflow() and
Signature · 1 line
2.17.1
PATCH v5 8/14 perf/x86/intel: Export TopDown events for Icelake
In reply to [email protected]From: Kan Liang <[email protected]>
Export new TopDown metrics events for perf that map to the sub metrics in the metrics register, and another for the new slots fixed counter. This makes the new fixed counters in Icelake visible to the perf user tools.
---
No changes since V4
arch/x86/events/intel/core.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/x86/events/intel/core.c +16 -0
@@ -321,6 +321,12 @@ EVENT_ATTR_STR_HT(topdown-recovery-bubbles, td_recovery_bubbles,EVENT_ATTR_STR_HT (topdown-recovery-bubbles.scale, td_recovery_bubbles_scale,"4" ,"2" ); +EVENT_ATTR_STR (slots, slots,"event=0x00,umask=0x4" ); +EVENT_ATTR_STR (topdown-retiring, td_retiring,"event=0x00,umask=0x10" ); +EVENT_ATTR_STR (topdown-bad-spec, td_bad_spec,"event=0x00,umask=0x11" ); +EVENT_ATTR_STR (topdown-fe-bound, td_fe_bound,"event=0x00,umask=0x12" ); +EVENT_ATTR_STR (topdown-be-bound, td_be_bound,"event=0x00,umask=0x13" ); +static struct attribute *snb_events_attrs[] = {EVENT_PTR (td_slots_issued),EVENT_PTR (td_slots_retired),
@@ -4567,6 +4573,15 @@ static struct attribute *icl_events_attrs[] = { NULL, }; +static struct attribute *icl_td_events_attrs[] = { +EVENT_PTR (slots), +EVENT_PTR (td_retiring), +EVENT_PTR (td_bad_spec), +EVENT_PTR (td_fe_bound), +EVENT_PTR (td_be_bound), +NULL , +}; +static struct attribute *icl_tsx_events_attrs[] = {EVENT_PTR (tx_start),EVENT_PTR (tx_abort),
@@ -5342,6 +5357,7 @@ __init int intel_pmu_init(void) hsw_format_attr : nhm_format_attr; extra_skl_attr = skl_format_attr; mem_attr = icl_events_attrs; + td_attr = icl_td_events_attrs; tsx_attr = icl_tsx_events_attrs; x86_pmu.rtm_abort_event = X86_CONFIG(.event=0xca, .umask=0x02); x86_pmu.lbr_pt_coexist = true;
Signature · 1 line
2.17.1
PATCH v5 9/14 perf/x86/intel: Disable sampling read slots and topdown
In reply to [email protected]From: Kan Liang <[email protected]>
The slots event supports sampling. Users may sampling read slots and metrics events, e.g perf record -e '{slots, topdown-retiring}:S'. But the metrics event will reset the fixed counter 3 which will impact the sampling of the slots event.
Add specific validate_group() support to reject the case and error out for Icelake.
An alternative fix may unconditionally disable SLOTS sampling. But it's not a decent fix. Because users may want to only sampling slot events without topdown metrics event.
---
No changes since V4
arch/x86/events/core.c | 4 ++++ arch/x86/events/intel/core.c | 20 ++++++++++++++++++++ arch/x86/events/perf_event.h | 2 ++ 3 files changed, 26 insertions(+)
arch/x86/events/core.c +4 -0
@@ -2111,7 +2111,11 @@ static int validate_group(struct perf_event *event) fake_cpuc->n_events =0 ; ret = x86_pmu.schedule_events (fake_cpuc, n,NULL ); +if (ret) + goto out; +if (x86_pmu.validate_group) + ret = x86_pmu.validate_group (fake_cpuc, n); out:free_fake_cpuc (fake_cpuc);return ret;
arch/x86/events/intel/core.c +20 -0
@@ -4512,6 +4512,25 @@ static __init void intel_ht_bug(void) x86_pmu.stop_scheduling = intel_stop_scheduling; } +static int icl_validate_group (struct cpu_hw_events *cpuc,int n) +{ +bool has_sampling_slots = false, has_metrics = false; +struct perf_event *e; +int i; + +for (i =0 ; i < n; i++) { + e = cpuc->event_list[i]; +if (is_slots_event (e) &&is_sampling_event (e)) + has_sampling_slots = true; + +if (is_metric_event (e)) + has_metrics = true; + } +if (unlikely (has_sampling_slots && has_metrics)) +return -EINVAL ; +return 0 ; +} +EVENT_ATTR_STR (mem-loads, mem_ld_hsw,"event=0xcd,umask=0x1,ldlat=3" );EVENT_ATTR_STR (mem-stores, mem_st_hsw,"event=0xd0,umask=0x82" )
@@ -5364,6 +5383,7 @@ __init int intel_pmu_init(void)intel_pmu_pebs_data_source_skl (pmem); x86_pmu.update_topdown_event = icl_update_topdown_event; x86_pmu.set_topdown_event_period = icl_set_topdown_event_period; + x86_pmu.validate_group = icl_validate_group;pr_cont ("Icelake events, " ); name ="icelake" ;break ;
arch/x86/events/perf_event.h +2 -0
@@ -661,6 +661,8 @@ struct x86_pmu {int perfctr_second_write;u64 (*limit_period)(struct perf_event *event,u64 l); +int (*validate_group)(struct cpu_hw_events *cpuc,int n); +/* PMI handler bits */ unsigned int late_ack :1, counter_freezing :1;
Signature · 1 line
2.17.1
PATCH v5 10/14 perf/x86/intel: Name global status bit in NMI handler
In reply to [email protected]From: Kan Liang <[email protected]>
The bit index number of global status is directly used in current NMI handler. Using a meaningful name to replace the number to improve the readability of code.
---
No changes since V4
arch/x86/events/intel/core.c | 6 +++--- arch/x86/include/asm/perf_event.h | 7 +++++-- 2 files changed, 8 insertions(+), 5 deletions(-)
arch/x86/events/intel/core.c +3 -3
@@ -2616,7 +2616,7 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)/* * PEBS overflow sets bit 62 in the global status register */ -if (__test_and_clear_bit (62 , (unsigned long *)&status)) { +if (__test_and_clear_bit (GLOBAL_STATUS_BUFFER_OVF_BIT , (unsigned long *)&status)) { handled++; x86_pmu.drain_pebs (regs); status &= x86_pmu.intel_ctrl |GLOBAL_STATUS_TRACE_TOPAPMI ;
@@ -2625,7 +2625,7 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)/* * Intel PT */ -if (__test_and_clear_bit (55 , (unsigned long *)&status)) { +if (__test_and_clear_bit (GLOBAL_STATUS_TRACE_TOPAPMI_BIT , (unsigned long *)&status)) { handled++;if (unlikely (perf_guest_cbs && perf_guest_cbs->is_in_guest () && perf_guest_cbs->handle_intel_pt_intr))
@@ -2637,7 +2637,7 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)/* * Intel Perf mertrics */ -if (__test_and_clear_bit (48 , (unsigned long *)&status)) { +if (__test_and_clear_bit (GLOBAL_STATUS_PERF_METRICS_OVF_BIT , (unsigned long *)&status)) { handled++;if (x86_pmu.update_topdown_event) x86_pmu.update_topdown_event (NULL );
arch/x86/include/asm/perf_event.h +5 -2
@@ -220,12 +220,15 @@ static inline bool is_topdown_idx(int idx)#define INTEL_PMC_OTHER_TOPDOWN_BITS (bit) (~(0x1ull << bit) & INTEL_PMC_MSK_TOPDOWN)#define GLOBAL_STATUS_COND_CHG BIT_ULL(63) -#define GLOBAL_STATUS_BUFFER_OVF BIT_ULL(62) +#define GLOBAL_STATUS_BUFFER_OVF_BIT 62 +#define GLOBAL_STATUS_BUFFER_OVF BIT_ULL(GLOBAL_STATUS_BUFFER_OVF_BIT)#define GLOBAL_STATUS_UNC_OVF BIT_ULL(61)#define GLOBAL_STATUS_ASIF BIT_ULL(60)#define GLOBAL_STATUS_COUNTERS_FROZEN BIT_ULL(59)#define GLOBAL_STATUS_LBRS_FROZEN BIT_ULL(58) -#define GLOBAL_STATUS_TRACE_TOPAPMI BIT_ULL(55) +#define GLOBAL_STATUS_TRACE_TOPAPMI_BIT 55 +#define GLOBAL_STATUS_TRACE_TOPAPMI BIT_ULL(GLOBAL_STATUS_TRACE_TOPAPMI_BIT) +#define GLOBAL_STATUS_PERF_METRICS_OVF_BIT 48/* * Adaptive PEBS v4
Signature · 1 line
2.17.1
PATCH v5 11/14 perf/x86: Use event_base_rdpmc for RDPMC userspace support
In reply to [email protected]From: Kan Liang <[email protected]>
The RDPMC index is always re-calculated in RDPMC userspace support, especially for fixed counters.
The RDPMC index value is stored in variable event_base_rdpmc for kernel usage, which can be used for RDPMC userspace support as well. Only the metrics event has to be specially handled.
---
No changes since V4
arch/x86/events/core.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)
arch/x86/events/core.c +6 -10
@@ -2203,20 +2203,16 @@ static void x86_pmu_event_unmapped(struct perf_event *event, struct mm_struct *mstatic int x86_pmu_event_idx (struct perf_event *event) { -int idx = event->hw.idx; +struct hw_perf_event *hwc = &event->hw; -if (!(event->hw.flags &PERF_X86_EVENT_RDPMC_ALLOWED )) +if (!(hwc->flags &PERF_X86_EVENT_RDPMC_ALLOWED ))return 0 ;/* Return PERF_METRICS MSR value for metrics event */ -if (is_metric_idx (idx)) - idx =1 <<29 ; -else if (x86_pmu.num_counters_fixed && idx >=INTEL_PMC_IDX_FIXED ) { - idx -=INTEL_PMC_IDX_FIXED ; - idx |=1 <<30 ; - } - -return idx +1 ; +if (is_metric_idx (hwc->idx)) +return (1 <<29 ) +1 ; +else +return hwc->event_base_rdpmc +1 ; } static ssize_t get_attr_rdpmc(struct device *cdev,
Signature · 1 line
2.17.1
PATCH v5 12/14 perf, tools, stat: Support new per thread TopDown metrics
In reply to [email protected]From: Andi Kleen <[email protected]>
Icelake has support for reporting per thread TopDown metrics. These are reported differently than the previous TopDown support, each metric is standalone, but scaled to pipeline "slots". We don't need to do anything special for HyperThreading anymore. Teach perf stat --topdown to handle these new metrics and print them in the same way as the previous TopDown metrics. The restrictions of only being able to report information per core is gone.
---
Changes since V4
- Add slots into topdown group
tools/perf/Documentation/perf-stat.txt | 9 ++- tools/perf/builtin-stat.c | 25 ++++++++ tools/perf/util/stat-shadow.c | 89 ++++++++++++++++++++++++++ tools/perf/util/stat.c | 4 ++ tools/perf/util/stat.h | 8 +++ 5 files changed, 133 insertions(+), 2 deletions(-)
tools/perf/Documentation/perf-stat.txt +7 -2
@@ -279,8 +279,13 @@ if the workload is actually bound by the CPU and not by something else. For best results it is usually a good idea to use it with interval mode like -I 1000, as the bottleneck of workloads can change often. -The top down metrics are collected per core instead of per -CPU thread. Per core mode is automatically enabled +This enables --metric-only, unless overridden with --no-metric-only. + +The following restrictions only apply to older Intel CPUs and Atom, +on newer CPUs (IceLake and later) TopDown can be collected for any thread: + +The top down metrics are collected per core instead of per CPU thread. +Per core mode is automatically enabled and -a (global monitoring) is needed, requiring root rights or perf.perf_event_paranoid=-1.
tools/perf/builtin-stat.c +25 -0
@@ -126,6 +126,15 @@ static const char * topdown_attrs[] = { NULL, }; +static const char *topdown_metric_attrs[] = { +"slots" , +"topdown-retiring" , +"topdown-bad-spec" , +"topdown-fe-bound" , +"topdown-be-bound" , +NULL , +}; +static const char *smi_cost_attrs = {"{" "msr/aperf/,"
@@ -1327,6 +1336,21 @@ static int add_default_attributes(void)char *str =NULL ;bool warn = false; +if (topdown_filter_events (topdown_metric_attrs, &str,1 ) <0 ) { +pr_err ("Out of memory\n" ); +return -1 ; + } +if (topdown_metric_attrs[0 ] && str) { +if (!stat_config.interval) { +fprintf (stat_config.output, +"Topdown accuracy may decreases when measuring long period.\n" +"Please print the result regularly, e.g. -I1000\n" ); + } + goto setup_metrics; + } + + str =NULL ; +if (stat_config.aggr_mode !=AGGR_GLOBAL && stat_config.aggr_mode !=AGGR_CORE ) {pr_err ("top down event configuration requires --per-core mode\n" );
@@ -1348,6 +1372,7 @@ static int add_default_attributes(void)if (topdown_attrs[0 ] && str) {if (warn)arch_topdown_group_warn (); +setup_metrics: err =parse_events (evsel_list, str, &errinfo);if (err) { fprintf(stderr,
tools/perf/util/stat-shadow.c +89 -0
107 lines not on this page · raw message
tools/perf/util/stat.c +4 -0
@@ -95,6 +95,10 @@ static const char *id_str[PERF_STAT_EVSEL_ID__MAX] = {ID (TOPDOWN_SLOTS_RETIRED , topdown-slots-retired),ID (TOPDOWN_FETCH_BUBBLES , topdown-fetch-bubbles),ID (TOPDOWN_RECOVERY_BUBBLES , topdown-recovery-bubbles), +ID (TOPDOWN_RETIRING , topdown-retiring), +ID (TOPDOWN_BAD_SPEC , topdown-bad-spec), +ID (TOPDOWN_FE_BOUND , topdown-fe-bound), +ID (TOPDOWN_BE_BOUND , topdown-be-bound), ID(SMI_NUM, msr/smi/), ID(APERF, msr/aperf/), };
tools/perf/util/stat.h +8 -0
@@ -28,6 +28,10 @@ enum perf_stat_evsel_id {PERF_STAT_EVSEL_ID__TOPDOWN_SLOTS_RETIRED ,PERF_STAT_EVSEL_ID__TOPDOWN_FETCH_BUBBLES ,PERF_STAT_EVSEL_ID__TOPDOWN_RECOVERY_BUBBLES , +PERF_STAT_EVSEL_ID__TOPDOWN_RETIRING , +PERF_STAT_EVSEL_ID__TOPDOWN_BAD_SPEC , +PERF_STAT_EVSEL_ID__TOPDOWN_FE_BOUND , +PERF_STAT_EVSEL_ID__TOPDOWN_BE_BOUND ,PERF_STAT_EVSEL_ID__SMI_NUM ,PERF_STAT_EVSEL_ID__APERF , PERF_STAT_EVSEL_ID__MAX,
@@ -81,6 +85,10 @@ enum stat_type {STAT_TOPDOWN_SLOTS_RETIRED ,STAT_TOPDOWN_FETCH_BUBBLES ,STAT_TOPDOWN_RECOVERY_BUBBLES , +STAT_TOPDOWN_RETIRING , +STAT_TOPDOWN_BAD_SPEC , +STAT_TOPDOWN_FE_BOUND , +STAT_TOPDOWN_BE_BOUND ,STAT_SMI_NUM ,STAT_APERF ,STAT_MAX
Signature · 1 line
2.17.1
PATCH v5 13/14 perf, tools, stat: Check Topdown Metric group
In reply to [email protected]From: Kan Liang <[email protected]>
The slots event is required in a Topdown Metric group.
Add a check to examine the Topdown Metric group. Error out if there is no slots event detected.
Only check the group on the platform which using topdown_metric_attrs, e.g. Ice Lake.
---
New for V5
tools/perf/builtin-stat.c | 72 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
tools/perf/builtin-stat.c +72 -0
@@ -1134,6 +1134,72 @@ static int topdown_filter_events(const char **attr, char **str, bool use_group)return 0 ; } +/* Event encoding for Topdown Metric events */ +#define TOPDOWN_SLOTS 0x0400 +#define TOPDOWN_RETIRE 0x1000 +#define TOPDOWN_BAD_SPEC 0x1100 +#define TOPDOWN_FE_BOUND 0x1200 +#define TOPDOWN_BE_BOUND 0x1300 + +static bool is_topdown_metric_event (struct evsel *counter) +{ +if (!counter->pmu_name) +return false; + +if (strcmp (counter->pmu_name,"cpu" )) +return false; + +if ((counter->core.attr.config ==TOPDOWN_RETIRE ) || + (counter->core.attr.config ==TOPDOWN_BAD_SPEC ) || + (counter->core.attr.config ==TOPDOWN_FE_BOUND ) || + (counter->core.attr.config ==TOPDOWN_BE_BOUND )) +return true; + +return false; +} + +static bool is_topdown_slots_event (struct evsel *counter) +{ +if (!counter->pmu_name) +return false; + +if (strcmp (counter->pmu_name,"cpu" )) +return false; + +if (counter->core.attr.config ==TOPDOWN_SLOTS ) +return true; + +return false; +} + +static bool topdown_check_group_member (void ) +{ +struct evsel *counter, *leader, *member; +bool has_slots; + +if (!pmu_have_event ("cpu" , topdown_metric_attrs[0 ])) +return true; + +evlist__for_each_entry (evsel_list, counter) { +if (!is_topdown_metric_event (counter)) +continue ; + + leader = counter->leader; + has_slots = false; + +for_each_group_evsel (member, leader) { +if (is_topdown_slots_event (member)) + has_slots = true; + counter = member; + } + +if (!has_slots) +return false; + } + +return true; +} +__weak bool arch_topdown_check_group (bool *warn) { *warn = false;
@@ -1740,6 +1806,12 @@ int cmd_stat(int argc, const char **argv) (const char **) stat_usage, PARSE_OPT_STOP_AT_NON_OPTION);perf_stat__collect_metric_expr (evsel_list); + +if (!topdown_check_group_member ()) { +fprintf (stderr,"Topdown group must include slots event\n" ); + goto out; + } +perf_stat__init_shadow_stats ();if (stat_config.csv_sep) {
Signature · 1 line
2.17.1
PATCH v5 14/14 perf, tools: Add documentation for topdown metrics
In reply to [email protected]From: Andi Kleen <[email protected]>
Add some documentation how to use the topdown metrics in ring 3.
---
Changes since V4
- Update example for Ice Lake
tools/perf/Documentation/topdown.txt | 235 +++++++++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 tools/perf/Documentation/topdown.txt
tools/perf/Documentation/topdown.txt new file +235 -0
@@ -0,0 +1,235 @@ +Using TopDown metrics in user space +----------------------------------- + +Intel CPUs (since Sandy Bridge and Silvermont) support a TopDown +methology to break down CPU pipeline execution into 4 bottlenecks: +frontend bound, backend bound, bad speculation, retiring. + +For more details on Topdown see [1][5] + +Traditionally this was implemented by events in generic counters +and specific formulas to compute the bottlenecks. + +perf stat --topdown implements this. + +Full Top Down includes more levels that can break down the +bottlenecks further. This is not directly implemented in perf, +but available in other tools that can run on top of perf, +such as toplev[2] or vtune[3] + +New Topdown features in Ice Lake +=============================== + +With Ice Lake CPUs the TopDown metrics are directly available as +fixed counters and do not require generic counters. This allows +to collect TopDown always in addition to other events. + +% perf stat -a --topdown -I1000 +# time counts unit events + 1.000854735 20,097,158,100 slots + 1.000854735 79,327,616 topdown-retiring # 0.4% retiring + 1.000854735 157,932,715 topdown-bad-spec # 0.8% bad speculation + 1.000854735 81,610,855 topdown-fe-bound # 0.4% frontend bound + 1.000854735 19,778,286,903 topdown-be-bound # 98.4% backend bound + 2.003623823 20,010,908,365 slots + 2.003623823 79,905,340 topdown-retiring # 0.4% retiring + 2.003623823 158,405,024 topdown-bad-spec # 0.8% bad speculation + 2.003623823 87,980,097 topdown-fe-bound # 0.4% frontend bound + 2.003623823 19,684,617,888 topdown-be-bound # 98.4% backend bound + 3.005828889 20,062,101,220 slots + 3.005828889 80,077,032 topdown-retiring # 0.4% retiring + 3.005828889 158,682,921 topdown-bad-spec # 0.8% bad speculation + 3.005828889 86,579,604 topdown-fe-bound # 0.4% frontend bound + 3.005828889 19,736,761,649 topdown-be-bound # 98.4% backend bound +... + +This also enables measuring TopDown per thread/process instead +of only per core. + +Using TopDown through RDPMC in applications on Ice Lake +====================================================== + +For more fine grained measurements it can be useful to +access the new directly from user space. This is more complicated, +but drastically lowers overhead. + +On Ice Lake, there is a new fixed counter 3: SLOTS, which reports +"pipeline SLOTS" (cycles multiplied by core issue width) and a +metric register that reports slots ratios for the different bottleneck +categories. + +The metrics counter is CPU model specific and is not be available +on older CPUs. + +Example code +============ + +Library functions to do the functionality described below +is also available in libjevents [4] + +The application opens a perf_event file descriptor +and sets up fixed counter 3 (SLOTS) to start and +allow user programs to read the performance counters. + +Fixed counter 3 is mapped to a pseudo event event=0x00, umask=04, +so the perf_event_attr structure should be initialized with +{ .config = 0x0400, .type = PERF_TYPE_RAW } + +#include <linux/perf_event.h> +#include <sys/syscall.h> +#include <unistd.h> + +/* Provide own perf_event_open stub because glibc doesn't */ +__attribute__((weak)) +int perf_event_open(struct perf_event_attr *attr, pid_t pid, + int cpu, int group_fd, unsigned long flags) +{ + return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags); +} + +/* open slots counter file descriptor for current task */ +struct perf_event_attr slots = { + .type = PERF_TYPE_RAW, + .size = sizeof(struct perf_event_attr), + .config = 0x400, + .exclude_kernel = 1, +}; + +int fd = perf_event_open(&slots, 0, -1, -1, 0); +if (fd < 0) + ... error ... + +The RDPMC instruction (or _rdpmc compiler intrinsic) can now be used +to read slots and the topdown metrics at different points of the program: + +#include <stdint.h> +#include <x86intrin.h> + +#define RDPMC_FIXED (1 << 30) /* return fixed counters */ +#define RDPMC_METRIC (1 << 29) /* return metric counters */ + +#define FIXED_COUNTER_SLOTS 3 +#define METRIC_COUNTER_TOPDOWN_L1 0 + +static inline uint64_t read_slots(void) +{ + return _rdpmc(RDPMC_FIXED | FIXED_COUNTER_SLOTS); +} + +static inline uint64_t read_metrics(void) +{ + return _rdpmc(RDPMC_METRIC | METRIC_COUNTER_TOPDOWN_L1); +} + +Then the program can be instrumented to read these metrics at different +points. + +It's not a good idea to do this with too short code regions, +as the parallelism and overlap in the CPU program execution will +cause too much measurement inaccuracy. For example instrumenting +individual basic blocks is definitely too fine grained. + +Decoding metrics values +======================= + +The value reported by read_metrics() contains four 8 bit fields +that represent a scaled ratio that represent the Level 1 bottleneck. +All four fields add up to 0xff (= 100%) + +The binary ratios in the metric value can be converted to float ratios: + +#define GET_METRIC(m, i) (((m) >> (i*8)) & 0xff) + +#define TOPDOWN_RETIRING(val) ((float)GET_METRIC(val, 0) / 0xff) +#define TOPDOWN_BAD_SPEC(val) ((float)GET_METRIC(val, 1) / 0xff) +#define TOPDOWN_FE_BOUND(val) ((float)GET_METRIC(val, 2) / 0xff) +#define TOPDOWN_BE_BOUND(val) ((float)GET_METRIC(val, 3) / 0xff) + +and then converted to percent for printing. + +The ratios in the metric accumulate for the time when the counter +is enabled. For measuring programs it is often useful to measure +specific sections. For this it is needed to deltas on metrics. + +This can be done by scaling the metrics with the slots counter +read at the same time. + +Then it's possible to take deltas of these slots counts +measured at different points, and determine the metrics +for that time period. + + slots_a = read_slots(); + metric_a = read_metrics(); + + ... larger code region ... + + slots_b = read_slots() + metric_b = read_metrics() + + # compute scaled metrics for measurement a + retiring_slots_a = GET_METRIC(metric_a, 0) * slots_a + bad_spec_slots_a = GET_METRIC(metric_a, 1) * slots_a + fe_bound_slots_a = GET_METRIC(metric_a, 2) * slots_a + be_bound_slots_a = GET_METRIC(metric_a, 3) * slots_a + + # compute delta scaled metrics between b and a + retiring_slots = GET_METRIC(metric_b, 0) * slots_b - retiring_slots_a + bad_spec_slots = GET_METRIC(metric_b, 1) * slots_b - bad_spec_slots_a + fe_bound_slots = GET_METRIC(metric_b, 2) * slots_b - fe_bound_slots_a + be_bound_slots = GET_METRIC(metric_b, 3) * slots_b - be_bound_slots_a + +Later the individual ratios for the measurement period can be recreated +from these counts. + + slots_delta = slots_b - slots_a + retiring_ratio = (float)retiring_slots / slots_delta + bad_spec_ratio = (float)bad_spec_slots / slots_delta + fe_bound_ratio = (float)fe_bound_slots / slots_delta + be_bound_ratio = (float)be_bound_slots / slota_delta + + printf("Retiring %.2f%% Bad Speculation %.2f%% FE Bound %.2f%% BE Bound %.2f%%\n", + retiring_ratio * 100., + bad_spec_ratio * 100., + fe_bound_ratio * 100., + be_bound_ratio * 100.); + +Resetting metrics counters +========================== + +Since the individual metrics are only 8bit they lose precision for +short regions over time because the number of cycles covered by each +fraction bit shrinks. So the counters need to be reset regularly. + +When using the kernel perf API the kernel resets on every read. +So as long as the reading is at reasonable intervals (every few +seconds) the precision is good. + +When using perf stat it is recommended to always use the -I option, +with no longer interval than a few seconds + + perf stat -I 1000 --topdown ... + +For user programs using RDPMC directly the counter can +be reset explicitly using ioctl: + + ioctl(perf_fd, PERF_EVENT_IOC_RESET, 0); + +This "opens" a new measurement period. + +A program using RDPMC for TopDown should schedule such a reset +regularly, as in every few seconds. + +Limits on Ice Lake +================== + +All the TopDown events must be in a group with SLOTS events. + +There is no sampling support for TopDown events. +Sampling read SLOTS and TopDown events is forbidden. +For example, perf record -e '{slots, topdown-retiring}:S' + +[1] https://software.intel.com/en-us/top-down-microarchitecture-analysis-method-win +[2] https://github.com/andikleen/pmu-tools/wiki/toplev-manual +[3] https://software.intel.com/en-us/intel-vtune-amplifier-xe +[4] https://github.com/andikleen/pmu-tools/tree/master/jevents +[5] https://sites.google.com/site/analysismethods/yasin-pubs
Signature · 1 line
2.17.1
Hi Peter,
Could you please take a look at the patch set?
Thanks,
Kan
Quoted 114 lines · On 11/3/2019 6:29 PM, [email protected] wrote:
From: Kan Liang <[email protected]>
Icelake has support for measuring the level 1 TopDown metrics directly in hardware. This is implemented by an additional METRICS register, and a new Fixed Counter 3 that measures pipeline SLOTS.
New in Icelake
- Do not require generic counters. This allows to collect TopDown always in addition to other events.
- Measuring TopDown per thread/process instead of only per coreFor the Ice Lake implementation of performance metrics, the values in
PERF_METRICSMSR are derived from fixed counter 3. Software should start both registers,PERF_METRICSand fixed counter 3, from zero. Additionally, software is recommended to periodically clear both registers in order to maintain accurate measurements. The latter is required for certain scenarios that involve sampling metrics at high rates. Software should always write fixed counter 3 before write toPERF_METRICS.
IA32_PERF_GLOBAL_STATUS. OVF_PERF_METRICS[48]: If this bit is set, it indicates that some PERF_METRICS-related counter has overflowed and a PMI is triggered. Software has to synchronize, e.g. re-start,PERF_METRICSas well as fixed counter 3. Otherwise,PERF_METRICSmay return invalid values.Limitation
- To get accurate result and avoid reading the METRICS register multiple times, the TopDown metrics events and SLOTS event have to be in the same group.
- METRICS and SLOTS registers have to be cleared after each read by SW. That is to prevent the lose of precision.
- Cannot do sampling read SLOTS and TopDown metric eventsPlease refer SDM Vol3, 18.3.9.3 Performance Metrics for the details of TopDown metrics.
Changes since V4:
- Add description regarding to event-code naming for fixed counters
- Fixadd_nr_metric_event().
For leader event, we have to take the accepted metrics events into account.
For sibling event, it doesn't need to count accepted metrics events again.
- Removeis_first_topdown_event_in_group().
Force slots in topdown group. Only update topdown events with slots event.
- Re-uselast_periodandperiod_leftforsaved_metricandsaved_slots.Changes since V3:
- Separate fixed counter3 definition patch
- Separate BTS index patch
- Apply Peter's cleanup patch
- Fix the name of perf capabilities for perf METRICS
- Apply patch formul_u64_u32_div()x86_64implementation
- Fix unconditionally allows collecting 4 extra events
- Add patch to clean up NMI handler by naming global status bit
- Add patch to reuseevent_base_rdpmcfor RDPMC userspace supportChanges since V2:
- Rebase on top of v5.3-rc1Key changes since V1:
- Remove variables forreg_idxand enabled_events[] array. Thereg_idxcan be calculated by idx in runtime.
Using existingactive_maskto replaceenabled_events.
- Choose value 47 for the fixed index of BTS.
- SupportOVF_PERF_METRICSoverflow bit in PMI handler
- Drops the caching mechanism and related variables
New mechanism is to update all active slots/metrics events for the first slots/metrics events in a group. For each group reading, it still only read the slots/perf_metrics MSR once
- Disable PMU for read of topdown events to avoid the NMI issue
- Move RDPMC support to a separate patch
- Using event=0x00,umask=0x1X for topdown metrics events
- Drop the patch which add REMOVE transaction
We can indicatex86_pmu_stop()by checking
(event && !test_bit(event->hw.idx,cpuc->active_mask)), which is a good place to save the slots/metrics MSR valueAndi Kleen (2):
perf, tools, stat: Support new per thread TopDown metrics perf, tools: Add documentation for topdown metricsKan Liang (12):
perf/x86/intel: Introduce the fourth fixed counter perf/x86/intel: Set correct mask for TOPDOWN.SLOTS perf/x86/intel: Move BTS index to 47
perf/x86/intel: Basic support for metrics counters perf/x86/intel: Fix the name of perf capabilities for perf METRICS perf/x86/intel: Support hardware TopDown metrics perf/x86/intel: Support per thread RDPMC TopDown metrics perf/x86/intel: Export TopDown events for Icelake perf/x86/intel: Disable sampling read slots and topdown perf/x86/intel: Name global status bit in NMI handler perf/x86: Useevent_base_rdpmcfor RDPMC userspace support perf, tools, stat: Check Topdown Metric grouparch/x86/events/core.c | 86 +++++- arch/x86/events/intel/core.c | 399 ++++++++++++++++++++++--- arch/x86/events/perf_event.h | 57 +++- arch/x86/include/asm/msr-index.h | 3 + arch/x86/include/asm/perf_event.h | 60 +++- include/linux/perf_event.h | 29 +- tools/perf/Documentation/perf-stat.txt | 9 +- tools/perf/Documentation/topdown.txt | 235 +++++++++++++++ tools/perf/builtin-stat.c | 97 ++++++ tools/perf/util/stat-shadow.c | 89 ++++++ tools/perf/util/stat.c | 4 + tools/perf/util/stat.h | 8 + 12 files changed, 1007 insertions(+), 69 deletions(-)create mode 100644
tools/perf/Documentation/topdown.txt