Multicolor Framework

new file mode 100644
index 000000000000..4b1bd82f2a42
@@ -0,0 +1,98 @@
+* Multicolor LED properties
+
+Bindings for multi color LEDs show how to describe current outputs of
+either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
+etc.) or standalone LEDs, to achieve logically grouped multi-color LED
+modules. This is achieved by adding multi-led nodes layer to the
+monochrome LED bindings.
+
+The nodes and properties defined in this document are unique to the multicolor
+LED class.  Common LED nodes and properties are inherited from the common.txt
+within this documentation directory.
+
+Required LED child properties:
+	- color : For multicolor LED support this property should be defined as
+		  LED_COLOR_ID_MULTI and further definition can be found in
+		  include/linux/leds/common.h.
+
+led-controller@30 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "ti,lp5024";
+	reg = <0x29>;
+
+	multi-led@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_CHARGING;
+
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	multi-led@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_ACTIVITY;
+		reg = <2>;
+		ti,led-bank = <2 3 5>;
+
+		led@6 {
+			reg = <0x6>;
+			color = <LED_COLOR_ID_RED>;
+			led-sources = <6 9 15>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			color = <LED_COLOR_ID_GREEN>;
+			led-sources = <7 10 16>;
+		};
+
+		led@8 {
+			reg = <0x8>;
+			color = <LED_COLOR_ID_BLUE>;
+			led-sources = <8 11 17>;
+		};
+	};
+
+	multi-led@4 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_ACTIVITY;
+
+		led@12 {
+			reg = <12>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@13 {
+			reg = <13>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@14 {
+			reg = <14>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+};

new file mode 100644
index 000000000000..3d1f9d726c70
@@ -0,0 +1,36 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <[email protected]>
+Description:	read/write
+		Writing to this file will update all LEDs within the group to a
+		calculated percentage of what each color LED intensity is set
+		to. The percentage is calculated for each grouped LED via the
+		equation below:
+
+		led_brightness = brightness * <color>_intensity/<color>_max_intensity
+
+		For additional details please refer to
+		Documentation/leds/leds-class-multicolor.rst.
+
+		The value of the color is from 0 to
+		/sys/class/leds/<led>/max_brightness.
+
+What:		/sys/class/leds/<led>/colors/<color>_intensity
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <[email protected]>
+Description:	read/write
+		The <color>_intensity file is created based on the color
+		defined by the registrar of the class.
+		There is one file per color presented.
+
+		The value of the color is from 0 to
+		/sys/class/leds/<led>/colors/<color>_max_intensity.
+
+What:		/sys/class/leds/<led>/colors/<color>_max_intensity
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <[email protected]>
+Description:	read only
+		Maximum intensity level for the LED color.

index 060f4e485897..bc70c6aa7138 100644
@@ -9,6 +9,7 @@ LEDs
 
    leds-class
    leds-class-flash
+   leds-class-multicolor
    ledtrig-oneshot
    ledtrig-transient
    ledtrig-usbport

100 lines not on this page · raw message

index 4b68520ac251..a1ede89afc9e 100644
@@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
 	  for the flash related features of a LED device. It can be built
 	  as a module.
 
+config LEDS_CLASS_MULTI_COLOR
+	tristate "LED Mulit Color LED Class Support"
+	depends on LEDS_CLASS
+	help
+	  This option enables the multicolor LED sysfs class in /sys/class/leds.
+	  It wraps LED class and adds multicolor LED specific sysfs attributes
+	  and kernel internal API to it. You'll need this to provide support
+	  for multicolor LEDs that are grouped together. This class is not
+	  intended for single color LEDs. It can be built as a module.
+
 config LEDS_BRIGHTNESS_HW_CHANGED
 	bool "LED Class brightness_hw_changed attribute support"
 	depends on LEDS_CLASS

index 2da39e896ce8..841038cfe35b 100644
@@ -4,6 +4,7 @@
 obj-$(CONFIG_NEW_LEDS)			+= led-core.o
 obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
 obj-$(CONFIG_LEDS_CLASS_FLASH)		+= led-class-flash.o
+obj-$(CONFIG_LEDS_CLASS_MULTI_COLOR)	+= led-class-multicolor.o
 obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers

new file mode 100644
index 000000000000..291d418642e0
@@ -0,0 +1,148 @@
+* Texas Instruments - LP5009/12/18/24/30/36 RGB LED driver
+
+The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
+a LED group or control them individually.
+
+The difference in these RGB LED drivers is the number of supported RGB modules.
+
+Required parent properties:
+	- compatible:
+		"ti,lp5009"
+		"ti,lp5012"
+		"ti,lp5018"
+		"ti,lp5024"
+		"ti,lp5030"
+		"ti,lp5036"
+	- reg :  I2C slave address
+		lp5009/12 - 0x14, 0x15, 0x16, 0x17
+		lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
+		lp5030/36 - 0x30, 0x31, 0x32, 0x33
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional parent properties:
+	- enable-gpios : gpio pin to enable/disable the device.
+	- vled-supply : LED supply
+
+Required child properties:
+	- #address-cells : 1
+	- #size-cells : 0
+	- reg : This is the LED module number.
+	- color : Must be LED_COLOR_ID_MULTI
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+
+Required child properties only if LED modules will be banked:
+	- ti,led-bank : This property denotes the LED module numbers that will
+			be controlled as a single RGB cluster.  Each LED module
+			number will be controlled by a single LED class instance.
+			There can only be one instance of the ti,led-bank
+			property for each device node.
+
+Required grandchildren properties:
+	- reg : A single entry denoting the LED output that controls
+		the monochrome LED.
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+	- led-sources : see Documentation/devicetree/bindings/leds/common.txt
+
+The LED outputs associated with the LED modules are defined in Table 1 of the
+corresponding data sheets.
+
+LP5009 - 3 Total RGB cluster LED outputs 0-2
+LP5012 - 4 Total RGB cluster LED outputs 0-3
+LP5018 - 6 Total RGB cluster LED outputs 0-5
+LP5024 - 8 Total RGB cluster LED outputs 0-7
+LP5030 - 10 Total RGB cluster LED outputs 0-9
+LP5036 - 12 Total RGB cluster LED outputs 0-11
+
+Optional child properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+led-controller@29 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "ti,lp5024";
+	reg = <0x29>;
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vmmcsd_fixed>;
+
+	multi-led@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STATUS;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	multi-led@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STANDBY;
+		ti,led-bank = <2 3 5>;
+
+		led@6 {
+			reg = <0x6>;
+			color = <LED_COLOR_ID_RED>;
+			led-sources = <6 9 15>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			color = <LED_COLOR_ID_GREEN>;
+			led-sources = <7 10 16>;
+		};
+
+		led@8 {
+			reg = <0x8>;
+			color = <LED_COLOR_ID_BLUE>;
+			led-sources = <8 11 17>;
+		};
+	};
+
+	multi-led@4 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_ACTIVITY;
+
+		led@12 {
+			reg = <12>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@13 {
+			reg = <13>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@14 {
+			reg = <14>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lp5012.pdf
+http://www.ti.com/lit/ds/symlink/lp5024.pdf
+http://www.ti.com/lit/ds/symlink/lp5036.pdf

index a1ede89afc9e..fb614a6b9afa 100644
@@ -363,6 +363,17 @@ config LEDS_LP3952
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3952.
 
+config LEDS_LP50XX
+	tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip"
+	depends on LEDS_CLASS && REGMAP_I2C
+	depends on LEDS_CLASS_MULTI_COLOR
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called leds-lp50xx.
+
 config LEDS_LP55XX_COMMON
 	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501

index 841038cfe35b..7a208a0f7b84 100644
@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
+obj-$(CONFIG_LEDS_LP50XX)		+= leds-lp50xx.o
 obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o

index 1b66a413fb9d..bfe2805c5534 100644
@@ -1,4 +1,4 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
+Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
 - compatible: one of

@@ -12,8 +12,8 @@ Required properties:
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
 Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
+- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
+- max-cur: Maximun current at each LED channel.
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin

index bfe2805c5534..0ccc1efc2499 100644
@@ -1,6 +1,8 @@
 Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
+- #address-cells: 1
+- #size-cells: 0
 - compatible: one of
 	national,lp5521
 	national,lp5523

@@ -14,6 +16,18 @@ Required properties:
 Each child has own specific current settings
 - led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
 - max-cur: Maximun current at each LED channel.
+- reg: Output channel for the LED.  This is zero based channel identifier and
+	the data sheet is a one based channel identifier.
+	reg value to output to LED output number
+	D1 = reg value is 0
+	D2 = reg value is 1
+	D3 = reg value is 2
+	D4 = reg value is 3
+	D5 = reg value is 4
+	D6 = reg value is 5
+	D7 = reg value is 6
+	D8 = reg value is 7
+	D9 = reg value is 8
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin

@@ -35,23 +49,28 @@ example 1) LP5521
 on channel 0.
 
 lp5521@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "national,lp5521";
 	reg = <0x32>;
 	label = "lp5521_pri";
 	clock-mode = /bits/ 8 <2>;
 
-	chan0 {
+	chan@0 {
+		reg = <0>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 		linux,default-trigger = "heartbeat";
 	};
 
-	chan1 {
+	chan@1 {
+		reg = <1>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 	};
 
-	chan2 {
+	chan@2 {
+		reg = <2>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 	};

@@ -70,59 +89,70 @@ ASEL1    ASEL0    Address
  VEN      VEN       35h
 
 lp5523@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "national,lp5523";
 	reg = <0x32>;
 	clock-mode = /bits/ 8 <1>;
 
-	chan0 {
+	chan@0 {
+		reg = <0>;
 		chan-name = "d1";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan1 {
+	chan@1 {
+		reg = <1>;
 		chan-name = "d2";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan2 {
+	chan@2 {
+		reg = <2>;
 		chan-name = "d3";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan3 {
+	chan@3 {
+		reg = <3>;
 		chan-name = "d4";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan4 {
+	chan@4 {
+		reg = <4>;
 		chan-name = "d5";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan5 {
+	chan@5 {
+		reg = <5>;
 		chan-name = "d6";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan6 {
+	chan@6 {
+		reg = <6>;
 		chan-name = "d7";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan7 {
+	chan@7 {
+		reg = <7>;
 		chan-name = "d8";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan8 {
+	chan@8 {
+		reg = <8>;
 		chan-name = "d9";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;

@@ -133,29 +163,35 @@ example 3) LP5562
 4 channels are defined.
 
 lp5562@30 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "ti,lp5562";
 	reg = <0x30>;
 	clock-mode = /bits/8 <2>;
 
-	chan0 {
+	chan@0 {
+		reg = <0>;
 		chan-name = "R";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
-	chan1 {
+	chan@1 {
+		reg = <1>;
 		chan-name = "G";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
-	chan2 {
+	chan@2 {
+		reg = <2>;
 		chan-name = "B";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
-	chan3 {
+	chan@3 {
+		reg = <3>;
 		chan-name = "W";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;

@@ -167,62 +203,125 @@ example 4) LP8501
 Others are same as LP5523.
 
 lp8501@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	compatible = "ti,lp8501";
 	reg = <0x32>;
 	clock-mode = /bits/ 8 <2>;
 	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
 
-	chan0 {
+	chan@0 {
+		reg = <0>;
 		chan-name = "d1";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan1 {
+	chan@1 {
+		reg = <1>;
 		chan-name = "d2";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan2 {
+	chan@2 {
+		reg = <2>;
 		chan-name = "d3";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan3 {
+	chan@3 {
+		reg = <3>;
 		chan-name = "d4";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan4 {
+	chan@4 {
+		reg = <4>;
 		chan-name = "d5";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan5 {
+	chan@5 {
+		reg = <5>;
 		chan-name = "d6";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan6 {
+	chan@6 {
+		reg = <6>;
 		chan-name = "d7";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan7 {
+	chan@7 {
+		reg = <7>;
 		chan-name = "d8";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan8 {
+	chan@8 {
+		reg = <8>;
 		chan-name = "d9";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 };
+
+Multicolor Framework Support
+In addition to the nodes and properties defined above for device support the
+properties below are needed for multicolor framework support as defined in
+Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
+
+Required child properties for multicolor framework
+	- color : Must be LED_COLOR_ID_MULTI
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+
+Required grandchildren properties
+	- reg : This is the LED output of the device
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+
+Multicolor LED example:
+led-controller@32 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "national,lp5523";
+	reg = <0x32>;
+	clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+	multi-led@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+		color = <LED_COLOR_ID_MULTI>;
+		function = LED_FUNCTION_STANDBY;
+		linux,default-trigger = "heartbeat";
+
+		led@0 {
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@1 {
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			reg = <0x6>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};

index 84a5ade1e865..643f35619246 100644
@@ -607,63 +607,74 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		chan@0 {
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan@1 {
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan@2 {
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan@3 {
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <3>;
 		};
 
-		chan4 {
+		chan@4 {
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <4>;
 		};
 
-		chan5 {
+		chan@5 {
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <5>;
 		};
 
-		chan6 {
+		chan@6 {
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <6>;
 		};
 
-		chan7 {
+		chan@7 {
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <7>;
 		};
 
-		chan8 {
+		chan@8 {
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			reg = <8>;
 		};
 	};
 

index e8d800fec637..efc466ed1fea 100644
@@ -257,29 +257,35 @@
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		chan0 {
+		chan@0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan@3 {
 			chan-name = "W";
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
+			reg = <3>;
 		};
 	};
 

index 4f6acbd8c040..8a873da102d3 100644
@@ -56,16 +56,21 @@
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};

@@ -75,15 +80,20 @@
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};

index fb614a6b9afa..5706bf8d8bd1 100644
@@ -377,6 +377,7 @@ config LEDS_LP50XX
 config LEDS_LP55XX_COMMON
 	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
+	depends on OF
 	select FW_LOADER
 	select FW_LOADER_USER_HELPER
 	help

index 0ccc1efc2499..5475f45ef51f 100644
@@ -48,7 +48,7 @@ example 1) LP5521
 'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
 on channel 0.
 
-lp5521@32 {
+led-controller@32 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "national,lp5521";

@@ -56,20 +56,20 @@ lp5521@32 {
 	label = "lp5521_pri";
 	clock-mode = /bits/ 8 <2>;
 
-	chan@0 {
+	led@0 {
 		reg = <0>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 		linux,default-trigger = "heartbeat";
 	};
 
-	chan@1 {
+	led@1 {
 		reg = <1>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
 	};
 
-	chan@2 {
+	led@2 {
 		reg = <2>;
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;

@@ -88,70 +88,70 @@ ASEL1    ASEL0    Address
  VEN      GND       34h
  VEN      VEN       35h
 
-lp5523@32 {
+led-controller@32 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "national,lp5523";
 	reg = <0x32>;
 	clock-mode = /bits/ 8 <1>;
 
-	chan@0 {
+	led@0 {
 		reg = <0>;
 		chan-name = "d1";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@1 {
+	led@1 {
 		reg = <1>;
 		chan-name = "d2";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@2 {
+	led@2 {
 		reg = <2>;
 		chan-name = "d3";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@3 {
+	led@3 {
 		reg = <3>;
 		chan-name = "d4";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@4 {
+	led@4 {
 		reg = <4>;
 		chan-name = "d5";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@5 {
+	led@5 {
 		reg = <5>;
 		chan-name = "d6";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@6 {
+	led@6 {
 		reg = <6>;
 		chan-name = "d7";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@7 {
+	led@7 {
 		reg = <7>;
 		chan-name = "d8";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@8 {
+	led@8 {
 		reg = <8>;
 		chan-name = "d9";
 		led-cur = /bits/ 8 <0x14>;

@@ -162,35 +162,35 @@ lp5523@32 {
 example 3) LP5562
 4 channels are defined.
 
-lp5562@30 {
+led-controller@30 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "ti,lp5562";
 	reg = <0x30>;
 	clock-mode = /bits/8 <2>;
 
-	chan@0 {
+	led@0 {
 		reg = <0>;
 		chan-name = "R";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
-	chan@1 {
+	led@1 {
 		reg = <1>;
 		chan-name = "G";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
-	chan@2 {
+	led@2 {
 		reg = <2>;
 		chan-name = "B";
 		led-cur = /bits/ 8 <0x20>;
 		max-cur = /bits/ 8 <0x60>;
 	};
 
-	chan@3 {
+	led@3 {
 		reg = <3>;
 		chan-name = "W";
 		led-cur = /bits/ 8 <0x20>;

@@ -202,7 +202,7 @@ example 4) LP8501
 9 channels are defined. The 'pwr-sel' is LP8501 specific property.
 Others are same as LP5523.
 
-lp8501@32 {
+led-controller@32 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "ti,lp8501";

@@ -210,63 +210,63 @@ lp8501@32 {
 	clock-mode = /bits/ 8 <2>;
 	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
 
-	chan@0 {
+	led@0 {
 		reg = <0>;
 		chan-name = "d1";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@1 {
+	led@1 {
 		reg = <1>;
 		chan-name = "d2";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@2 {
+	led@2 {
 		reg = <2>;
 		chan-name = "d3";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@3 {
+	led@3 {
 		reg = <3>;
 		chan-name = "d4";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@4 {
+	led@4 {
 		reg = <4>;
 		chan-name = "d5";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@5 {
+	led@5 {
 		reg = <5>;
 		chan-name = "d6";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@6 {
+	led@6 {
 		reg = <6>;
 		chan-name = "d7";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@7 {
+	led@7 {
 		reg = <7>;
 		chan-name = "d8";
 		led-cur = /bits/ 8 <0x14>;
 		max-cur = /bits/ 8 <0x20>;
 	};
 
-	chan@8 {
+	led@8 {
 		reg = <8>;
 		chan-name = "d9";
 		led-cur = /bits/ 8 <0x14>;