Skip to contentSkip to conversation

4.9.199-stable review

PATCH In review Greg Kroah-Hartman 8 participants 72 messages Nov 4, 2019 – Nov 6, 2019

Subsystems (6)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.9.199-stable review

This is the start of the stable review cycle for the 4.9.199 release. There are 62 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 06 Nov 2019 09:14:04 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.199-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.9.199-rc1

Takashi Iwai <[email protected]>
ALSA: timer: Fix mutex deadlock at releasing card

Takashi Iwai <[email protected]>
ALSA: timer: Simplify error path in snd_timer_open()

Takashi Iwai <[email protected]>
ALSA: timer: Limit max instances per timer

Takashi Iwai <[email protected]>
ALSA: timer: Follow standard EXPORT_SYMBOL() declarations

Vratislav Bendel <[email protected]>
xfs: Correctly invert xfs_buftarg LRU isolation logic

Xin Long <[email protected]>
sctp: not bind the socket in sctp_connect

Xin Long <[email protected]>
sctp: fix the issue that flags are ignored when using kernel_connect

Eric Dumazet <[email protected]>
sch_netem: fix rcu splat in netem_enqueue()

Valentin Vidic <[email protected]>
net: usb: sr9800: fix uninitialized local variable

Eric Dumazet <[email protected]>
bonding: fix potential NULL deref in bond_update_slave_arr

Eric Biggers <[email protected]>
llc: fix sk_buff leak in llc_conn_service()

Eric Biggers <[email protected]>
llc: fix sk_buff leak in llc_sap_state_process()

Tony Lindgren <[email protected]>
dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle

Laura Abbott <[email protected]>
rtlwifi: Fix potential overflow on P2P code

Yihui ZENG <[email protected]>
s390/cmm: fix information leak in cmm_timeout_handler()

Markus Theil <[email protected]>
nl80211: fix validation of mesh path nexthop

Michał Mirosław <[email protected]>
HID: fix error message in hid_open_report()

Alan Stern <[email protected]>
HID: Fix assumption that devices have inputs

Hans de Goede <[email protected]>
HID: i2c-hid: add Trekstor Primebook C11B to descriptor override

Johan Hovold <[email protected]>
USB: serial: whiteheat: fix line-speed endianness

Johan Hovold <[email protected]>
USB: serial: whiteheat: fix potential slab corruption

Johan Hovold <[email protected]>
USB: ldusb: fix control-message timeout

Johan Hovold <[email protected]>
USB: ldusb: fix ring-buffer locking

Alan Stern <[email protected]>
usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")

Alan Stern <[email protected]>
USB: gadget: Reject endpoints with 0 maxpacket value

Alan Stern <[email protected]>
UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

Takashi Sakamoto <[email protected]>
ALSA: bebob: Fix prototype of helper function to return negative value

Miklos Szeredi <[email protected]>
fuse: truncate pending writes on O_TRUNC

Miklos Szeredi <[email protected]>
fuse: flush dirty data/metadata before non-truncate setattr

Hui Peng <[email protected]>
ath6kl: fix a NULL-ptr-deref bug in ath6kl_usb_alloc_urb_from_pipe()

Mika Westerberg <[email protected]>
thunderbolt: Use 32-bit writes when writing ring producer/consumer

Dan Carpenter <[email protected]>
USB: legousbtower: fix a signedness bug in tower_probe()

Petr Mladek <[email protected]>

    tracing: Initialize iter->seq after zeroing in tracing_read_pipe()

Christian Borntraeger <[email protected]>
s390/uaccess: avoid (false positive) compiler warnings

Chuck Lever <[email protected]>

    NFSv4: Fix leak of clp->cl_acceptor string

Thomas Bogendoerfer <[email protected]>
MIPS: fw: sni: Fix out of bounds init of o32 stack

Jia-Ju Bai <[email protected]>
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc()

Jia-Ju Bai <[email protected]>
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock()

Jia-Ju Bai <[email protected]>
fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()

Jia Guo <[email protected]>
ocfs2: clear zero in unaligned direct IO

Dave Young <[email protected]>
efi/x86: Do not clean dummy variable in kexec path

Lukas Wunner <[email protected]>
efi/cper: Fix endianness of PCIe class code

Adam Ford <[email protected]>
serial: mctrl_gpio: Check for NULL pointer

Austin Kim <[email protected]>
fs: cifs: mute -Wunused-const-variable message

Thierry Reding <[email protected]>
gpio: max77620: Use correct unit for debounce times

Bart Van Assche <[email protected]>
RDMA/iwcm: Fix a lock inversion issue

Connor Kuehl <[email protected]>
staging: rtl8188eu: fix null dereference when kzalloc fails

Andi Kleen <[email protected]>
perf jevents: Fix period for Intel fixed counters

Steve MacLean <[email protected]>
perf map: Fix overlapped map handling

Pascal Bouwmann <[email protected]>
iio: fix center temperature of bmc150-accel-core

Kees Cook <[email protected]>
exec: load_script: Do not exec truncated interpreter path

Sam Ravnborg <[email protected]>
rtc: pcf8523: set xtal load capacitance from DT

Jan-Marek Glogowski <[email protected]>
usb: handle warm-reset port requests on hub resume

Brian Norris <[email protected]>

    scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks

Hans de Goede <[email protected]>
HID: i2c-hid: Add Odys Winbook 13 to descriptor override

Kan Liang <[email protected]>
x86/cpu: Add Atom Tremont (Jacobsville)

Julian Sax <[email protected]>
HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override

Phil Elwell <[email protected]>
sc16is7xx: Fix for "Unexpected interrupt: 8"

Kent Overstreet <[email protected]>
dm: Use kzalloc for all structs with embedded biosets/mempools

Mikulas Patocka <[email protected]>
dm snapshot: rework COW throttling to fix deadlock

Mikulas Patocka <[email protected]>
dm snapshot: introduce account_start_copy() and account_end_copy()

Mikulas Patocka <[email protected]>
dm snapshot: use mutex instead of rw_semaphore

-------------

Diffstat:

 Makefile                                    |   4 +-
 arch/mips/fw/sni/sniprom.c                  |   2 +-
 arch/s390/include/asm/uaccess.h             |   4 +-
 arch/s390/mm/cmm.c                          |  12 +-
 arch/x86/include/asm/intel-family.h         |   3 +-
 arch/x86/platform/efi/efi.c                 |   3 -
 drivers/dma/cppi41.c                        |  21 +++-
 drivers/firmware/efi/cper.c                 |   2 +-
 drivers/gpio/gpio-max77620.c                |   6 +-
 drivers/hid/hid-axff.c                      |  11 +-
 drivers/hid/hid-core.c                      |   7 +-
 drivers/hid/hid-dr.c                        |  12 +-
 drivers/hid/hid-emsff.c                     |  12 +-
 drivers/hid/hid-gaff.c                      |  12 +-
 drivers/hid/hid-holtekff.c                  |  12 +-
 drivers/hid/hid-lg2ff.c                     |  12 +-
 drivers/hid/hid-lg3ff.c                     |  11 +-
 drivers/hid/hid-lg4ff.c                     |  11 +-
 drivers/hid/hid-lgff.c                      |  11 +-
 drivers/hid/hid-logitech-hidpp.c            |  11 +-
 drivers/hid/hid-sony.c                      |  12 +-
 drivers/hid/hid-tmff.c                      |  12 +-
 drivers/hid/hid-zpff.c                      |  12 +-
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c    |  35 ++++++
 drivers/iio/accel/bmc150-accel-core.c       |   2 +-
 drivers/infiniband/core/cma.c               |   3 +-
 drivers/md/dm-bio-prison.c                  |   2 +-
 drivers/md/dm-io.c                          |   2 +-
 drivers/md/dm-kcopyd.c                      |   2 +-
 drivers/md/dm-region-hash.c                 |   2 +-
 drivers/md/dm-snap.c                        | 178 +++++++++++++++++++---------
 drivers/md/dm-thin.c                        |   2 +-
 drivers/net/bonding/bond_main.c             |   2 +-
 drivers/net/usb/sr9800.c                    |   2 +-
 drivers/net/wireless/ath/ath6kl/usb.c       |   8 ++
 drivers/net/wireless/realtek/rtlwifi/ps.c   |   6 +
 drivers/rtc/rtc-pcf8523.c                   |  28 +++--
 drivers/staging/rtl8188eu/os_dep/usb_intf.c |   6 +-
 drivers/thunderbolt/nhi.c                   |  22 +++-
 drivers/tty/serial/sc16is7xx.c              |  28 +++++
 drivers/tty/serial/serial_mctrl_gpio.c      |   3 +
 drivers/usb/core/hub.c                      |   7 ++
 drivers/usb/gadget/udc/core.c               |  11 ++
 drivers/usb/misc/ldusb.c                    |   6 +-
 drivers/usb/misc/legousbtower.c             |   2 +-
 drivers/usb/serial/whiteheat.c              |  13 +-
 drivers/usb/serial/whiteheat.h              |   2 +-
 drivers/usb/storage/scsiglue.c              |  10 --
 drivers/usb/storage/uas.c                   |  20 ----
 fs/binfmt_script.c                          |  57 +++++++--
 fs/cifs/netmisc.c                           |   4 -
 fs/fuse/dir.c                               |  13 ++
 fs/fuse/file.c                              |  10 +-
 fs/nfs/nfs4proc.c                           |   1 +
 fs/ocfs2/aops.c                             |  25 +++-
 fs/ocfs2/ioctl.c                            |   2 +-
 fs/ocfs2/xattr.c                            |  56 ++++-----
 fs/xfs/xfs_buf.c                            |   2 +-
 include/net/llc_conn.h                      |   2 +-
 include/net/sch_generic.h                   |   5 +
 include/net/sctp/sctp.h                     |   2 +
 include/sound/timer.h                       |   2 +
 kernel/trace/trace.c                        |   1 +
 net/llc/llc_c_ac.c                          |   8 +-
 net/llc/llc_conn.c                          |  32 ++---
 net/llc/llc_s_ac.c                          |  12 +-
 net/llc/llc_sap.c                           |  23 ++--
 net/sched/sch_netem.c                       |   2 +-
 net/sctp/ipv6.c                             |   2 +-
 net/sctp/protocol.c                         |   2 +-
 net/sctp/socket.c                           |  55 +++++----
 net/wireless/nl80211.c                      |   3 +-
 scripts/setlocalversion                     |  12 +-
 sound/core/hrtimer.c                        |   1 +
 sound/core/timer.c                          | 141 +++++++++++++++-------
 sound/firewire/bebob/bebob_stream.c         |   3 +-
 tools/perf/pmu-events/jevents.c             |  12 +-
 tools/perf/util/map.c                       |   3 +
 78 files changed, 754 insertions(+), 358 deletions(-)
author maintainer
#1 lore raw

PATCH 1/62 dm snapshot: use mutex instead of rw_semaphore

From: Mikulas Patocka <[email protected]>

[ Upstream commit ae1093be5a0ef997833e200a0dafb9ed0b1ff4fe ]

The rw_semaphore is acquired for read only in two places, neither is performance-critical. So replace it with a mutex -- which is more efficient.

---
 drivers/md/dm-snap.c | 84 +++++++++++++++++++++++---------------------
 1 file changed, 43 insertions(+), 41 deletions(-)
drivers/md/dm-snap.c +43 -41
index 2da0b9b213c72..e5b0e13f5c92d 100644
@@ -48,7 +48,7 @@ struct dm_exception_table {
 };
 
 struct dm_snapshot {
-	struct rw_semaphore lock;
+	struct mutex lock;
 
 	struct dm_dev *origin;
 	struct dm_dev *cow;
@@ -456,9 +456,9 @@ static int __find_snapshots_sharing_cow(struct dm_snapshot *snap,
 		if (!bdev_equal(s->cow->bdev, snap->cow->bdev))
 			continue;
 
-		down_read(&s->lock);
+		mutex_lock(&s->lock);
 		active = s->active;
-		up_read(&s->lock);
+		mutex_unlock(&s->lock);
 
 		if (active) {
 			if (snap_src)
@@ -926,7 +926,7 @@ static int remove_single_exception_chunk(struct dm_snapshot *s)
 	int r;
 	chunk_t old_chunk = s->first_merging_chunk + s->num_merging_chunks - 1;
 
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 
 	/*
 	 * Process chunks (and associated exceptions) in reverse order
@@ -941,7 +941,7 @@ static int remove_single_exception_chunk(struct dm_snapshot *s)
 	b = __release_queued_bios_after_merge(s);
 
 out:
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 	if (b)
 		flush_bios(b);
 
@@ -1000,9 +1000,9 @@ static void snapshot_merge_next_chunks(struct dm_snapshot *s)
 		if (linear_chunks < 0) {
 			DMERR("Read error in exception store: "
 			      "shutting down merge");
-			down_write(&s->lock);
+			mutex_lock(&s->lock);
 			s->merge_failed = 1;
-			up_write(&s->lock);
+			mutex_unlock(&s->lock);
 		}
 		goto shut;
 	}
@@ -1043,10 +1043,10 @@ static void snapshot_merge_next_chunks(struct dm_snapshot *s)
 		previous_count = read_pending_exceptions_done_count();
 	}
 
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 	s->first_merging_chunk = old_chunk;
 	s->num_merging_chunks = linear_chunks;
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 
 	/* Wait until writes to all 'linear_chunks' drain */
 	for (i = 0; i < linear_chunks; i++)
@@ -1088,10 +1088,10 @@ static void merge_callback(int read_err, unsigned long write_err, void *context)
 	return;
 
 shut:
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 	s->merge_failed = 1;
 	b = __release_queued_bios_after_merge(s);
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 	error_bios(b);
 
 	merge_shutdown(s);
@@ -1190,7 +1190,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	s->exception_start_sequence = 0;
 	s->exception_complete_sequence = 0;
 	INIT_LIST_HEAD(&s->out_of_order_list);
-	init_rwsem(&s->lock);
+	mutex_init(&s->lock);
 	INIT_LIST_HEAD(&s->list);
 	spin_lock_init(&s->pe_lock);
 	s->state_bits = 0;
@@ -1357,9 +1357,9 @@ static void snapshot_dtr(struct dm_target *ti)
 	/* Check whether exception handover must be cancelled */
 	(void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL);
 	if (snap_src && snap_dest && (s == snap_src)) {
-		down_write(&snap_dest->lock);
+		mutex_lock(&snap_dest->lock);
 		snap_dest->valid = 0;
-		up_write(&snap_dest->lock);
+		mutex_unlock(&snap_dest->lock);
 		DMERR("Cancelling snapshot handover.");
 	}
 	up_read(&_origins_lock);
@@ -1390,6 +1390,8 @@ static void snapshot_dtr(struct dm_target *ti)
 
 	dm_exception_store_destroy(s->store);
 
+	mutex_destroy(&s->lock);
+
 	dm_put_device(ti, s->cow);
 
 	dm_put_device(ti, s->origin);
@@ -1477,7 +1479,7 @@ static void pending_complete(void *context, int success)
 
 	if (!success) {
 		/* Read/write error - snapshot is unusable */
-		down_write(&s->lock);
+		mutex_lock(&s->lock);
 		__invalidate_snapshot(s, -EIO);
 		error = 1;
 		goto out;
@@ -1485,14 +1487,14 @@ static void pending_complete(void *context, int success)
 
 	e = alloc_completed_exception(GFP_NOIO);
 	if (!e) {
-		down_write(&s->lock);
+		mutex_lock(&s->lock);
 		__invalidate_snapshot(s, -ENOMEM);
 		error = 1;
 		goto out;
 	}
 	*e = pe->e;
 
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 	if (!s->valid) {
 		free_completed_exception(e);
 		error = 1;
@@ -1517,7 +1519,7 @@ out:
 		full_bio->bi_end_io = pe->full_bio_end_io;
 	increment_pending_exceptions_done_count();
 
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 
 	/* Submit any pending write bios */
 	if (error) {
@@ -1716,7 +1718,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)
 
 	/* FIXME: should only take write lock if we need
 	 * to copy an exception */
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 
 	if (!s->valid || (unlikely(s->snapshot_overflowed) &&
 	    bio_data_dir(bio) == WRITE)) {
@@ -1739,9 +1741,9 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)
 	if (bio_data_dir(bio) == WRITE) {
 		pe = __lookup_pending_exception(s, chunk);
 		if (!pe) {
-			up_write(&s->lock);
+			mutex_unlock(&s->lock);
 			pe = alloc_pending_exception(s);
-			down_write(&s->lock);
+			mutex_lock(&s->lock);
 
 			if (!s->valid || s->snapshot_overflowed) {
 				free_pending_exception(pe);
@@ -1776,7 +1778,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)
 		    bio->bi_iter.bi_size ==
 		    (s->store->chunk_size << SECTOR_SHIFT)) {
 			pe->started = 1;
-			up_write(&s->lock);
+			mutex_unlock(&s->lock);
 			start_full_bio(pe, bio);
 			goto out;
 		}
@@ -1786,7 +1788,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)
 		if (!pe->started) {
 			/* this is protected by snap->lock */
 			pe->started = 1;
-			up_write(&s->lock);
+			mutex_unlock(&s->lock);
 			start_copy(pe);
 			goto out;
 		}
@@ -1796,7 +1798,7 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)
 	}
 
 out_unlock:
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 out:
 	return r;
 }
@@ -1832,7 +1834,7 @@ static int snapshot_merge_map(struct dm_target *ti, struct bio *bio)
 
 	chunk = sector_to_chunk(s->store, bio->bi_iter.bi_sector);
 
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 
 	/* Full merging snapshots are redirected to the origin */
 	if (!s->valid)
@@ -1863,12 +1865,12 @@ redirect_to_origin:
 	bio->bi_bdev = s->origin->bdev;
 
 	if (bio_data_dir(bio) == WRITE) {
-		up_write(&s->lock);
+		mutex_unlock(&s->lock);
 		return do_origin(s->origin, bio);
 	}
 
 out_unlock:
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 
 	return r;
 }
@@ -1899,7 +1901,7 @@ static int snapshot_preresume(struct dm_target *ti)
 	down_read(&_origins_lock);
 	(void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL);
 	if (snap_src && snap_dest) {
-		down_read(&snap_src->lock);
+		mutex_lock(&snap_src->lock);
 		if (s == snap_src) {
 			DMERR("Unable to resume snapshot source until "
 			      "handover completes.");
@@ -1909,7 +1911,7 @@ static int snapshot_preresume(struct dm_target *ti)
 			      "source is suspended.");
 			r = -EINVAL;
 		}
-		up_read(&snap_src->lock);
+		mutex_unlock(&snap_src->lock);
 	}
 	up_read(&_origins_lock);
 
@@ -1955,11 +1957,11 @@ static void snapshot_resume(struct dm_target *ti)
 
 	(void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL);
 	if (snap_src && snap_dest) {
-		down_write(&snap_src->lock);
-		down_write_nested(&snap_dest->lock, SINGLE_DEPTH_NESTING);
+		mutex_lock(&snap_src->lock);
+		mutex_lock_nested(&snap_dest->lock, SINGLE_DEPTH_NESTING);
 		__handover_exceptions(snap_src, snap_dest);
-		up_write(&snap_dest->lock);
-		up_write(&snap_src->lock);
+		mutex_unlock(&snap_dest->lock);
+		mutex_unlock(&snap_src->lock);
 	}
 
 	up_read(&_origins_lock);
@@ -1974,9 +1976,9 @@ static void snapshot_resume(struct dm_target *ti)
 	/* Now we have correct chunk size, reregister */
 	reregister_snapshot(s);
 
-	down_write(&s->lock);
+	mutex_lock(&s->lock);
 	s->active = 1;
-	up_write(&s->lock);
+	mutex_unlock(&s->lock);
 }
 
 static uint32_t get_origin_minimum_chunksize(struct block_device *bdev)
@@ -2016,7 +2018,7 @@ static void snapshot_status(struct dm_target *ti, status_type_t type,
 	switch (type) {
 	case STATUSTYPE_INFO:
 
-		down_write(&snap->lock);
+		mutex_lock(&snap->lock);
 
 		if (!snap->valid)
 			DMEMIT("Invalid");
@@ -2041,7 +2043,7 @@ static void snapshot_status(struct dm_target *ti, status_type_t type,
 				DMEMIT("Unknown");
 		}
 
-		up_write(&snap->lock);
+		mutex_unlock(&snap->lock);
 
 		break;
 
@@ -2107,7 +2109,7 @@ static int __origin_write(struct list_head *snapshots, sector_t sector,
 		if (dm_target_is_snapshot_merge(snap->ti))
 			continue;
 
-		down_write(&snap->lock);
+		mutex_lock(&snap->lock);
 
 		/* Only deal with valid and active snapshots */
 		if (!snap->valid || !snap->active)
@@ -2134,9 +2136,9 @@ static int __origin_write(struct list_head *snapshots, sector_t sector,
 
 		pe = __lookup_pending_exception(snap, chunk);
 		if (!pe) {
-			up_write(&snap->lock);
+			mutex_unlock(&snap->lock);
 			pe = alloc_pending_exception(snap);
-			down_write(&snap->lock);
+			mutex_lock(&snap->lock);
 
 			if (!snap->valid) {
 				free_pending_exception(pe);
@@ -2179,7 +2181,7 @@ static int __origin_write(struct list_head *snapshots, sector_t sector,
 		}
 
 next_snapshot:
-		up_write(&snap->lock);
+		mutex_unlock(&snap->lock);
 
 		if (pe_to_start_now) {
 			start_copy(pe_to_start_now);
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 2/62 dm snapshot: introduce account_start_copy() and account_end_copy()

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

[ Upstream commit a2f83e8b0c82c9500421a26c49eb198b25fcdea3 ]

This simple refactoring moves code for modifying the semaphore cow_count into separate functions to prepare for changes that will extend these methods to provide for a more sophisticated mechanism for COW throttling.

---
 drivers/md/dm-snap.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/md/dm-snap.c +13 -3
index e5b0e13f5c92d..ef51ab8a5dcb2 100644
@@ -1399,6 +1399,16 @@ static void snapshot_dtr(struct dm_target *ti)
 	kfree(s);
 }
 
+static void account_start_copy(struct dm_snapshot *s)
+{
+	down(&s->cow_count);
+}
+
+static void account_end_copy(struct dm_snapshot *s)
+{
+	up(&s->cow_count);
+}
+
 /*
  * Flush a list of buffers.
  */
@@ -1581,7 +1591,7 @@ static void copy_callback(int read_err, unsigned long write_err, void *context)
 		}
 		list_add(&pe->out_of_order_entry, lh);
 	}
-	up(&s->cow_count);
+	account_end_copy(s);
 }
 
 /*
@@ -1605,7 +1615,7 @@ static void start_copy(struct dm_snap_pending_exception *pe)
 	dest.count = src.count;
 
 	/* Hand over to kcopyd */
-	down(&s->cow_count);
+	account_start_copy(s);
 	dm_kcopyd_copy(s->kcopyd_client, &src, 1, &dest, 0, copy_callback, pe);
 }
 
@@ -1625,7 +1635,7 @@ static void start_full_bio(struct dm_snap_pending_exception *pe,
 	pe->full_bio = bio;
 	pe->full_bio_end_io = bio->bi_end_io;
 
-	down(&s->cow_count);
+	account_start_copy(s);
 	callback_data = dm_kcopyd_prepare_callback(s->kcopyd_client,
 						   copy_callback, pe);
 
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 3/62 dm snapshot: rework COW throttling to fix deadlock

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

[ Upstream commit b21555786f18cd77f2311ad89074533109ae3ffa ]

Commit 721b1d98fb517a ("dm snapshot: Fix excessive memory usage and workqueue stalls") introduced a semaphore to limit the maximum number of in-flight kcopyd (COW) jobs.

The implementation of this throttling mechanism is prone to a deadlock:

1. One or more threads write to the origin device causing COW, which is performed by kcopyd.

2. At some point some of these threads might reach the s->cow_count semaphore limit and block in down(&s->cow_count), holding a read lock on _origins_lock.

3. Someone tries to acquire a write lock on _origins_lock, e.g., snapshot_ctr(), which blocks because the threads at step (2) already hold a read lock on it.

4. A COW operation completes and kcopyd runs dm-snapshot's completion callback, which ends up calling pending_complete(). pending_complete() tries to resubmit any deferred origin bios. This requires acquiring a read lock on _origins_lock, which blocks.

This happens because the read-write semaphore implementation gives priority to writers, meaning that as soon as a writer tries to enter the critical section, no readers will be allowed in, until all writers have completed their work.

So, pending_complete() waits for the writer at step (3) to acquire and release the lock. This writer waits for the readers at step (2) to release the read lock and those readers wait for pending_complete() (the kcopyd thread) to signal the s->cow_count
semaphore: DEADLOCK.

The above was thoroughly analyzed and documented by Nikos Tsironis as part of his initial proposal for fixing this deadlock, see:
https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html

Fix this deadlock by reworking COW throttling so that it waits without holding any locks. Add a variable 'in_progress' that counts how many kcopyd jobs are running. A function wait_for_in_progress() will sleep if 'in_progress' is over the limit. It drops _origins_lock in order to avoid the deadlock.

Fixes 721b1d98fb51 ("dm snapshot: Fix excessive memory usage and workqueue stalls")

Depends-on: 4a3f111a73a8c ("dm snapshot: introduce account_start_copy() and account_end_copy()")

---
 drivers/md/dm-snap.c | 80 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 64 insertions(+), 16 deletions(-)
drivers/md/dm-snap.c +64 -16
index ef51ab8a5dcb2..cf2f44e500e24 100644
@@ -19,7 +19,6 @@
 #include <linux/vmalloc.h>
 #include <linux/log2.h>
 #include <linux/dm-kcopyd.h>
-#include <linux/semaphore.h>
 
 #include "dm.h"
 
@@ -106,8 +105,8 @@ struct dm_snapshot {
 	/* The on disk metadata handler */
 	struct dm_exception_store *store;
 
-	/* Maximum number of in-flight COW jobs. */
-	struct semaphore cow_count;
+	unsigned in_progress;
+	wait_queue_head_t in_progress_wait;
 
 	struct dm_kcopyd_client *kcopyd_client;
 
@@ -158,8 +157,8 @@ struct dm_snapshot {
  */
 #define DEFAULT_COW_THRESHOLD 2048
 
-static int cow_threshold = DEFAULT_COW_THRESHOLD;
-module_param_named(snapshot_cow_threshold, cow_threshold, int, 0644);
+static unsigned cow_threshold = DEFAULT_COW_THRESHOLD;
+module_param_named(snapshot_cow_threshold, cow_threshold, uint, 0644);
 MODULE_PARM_DESC(snapshot_cow_threshold, "Maximum number of chunks being copied on write");
 
 DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(snapshot_copy_throttle,
@@ -1206,7 +1205,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 		goto bad_hash_tables;
 	}
 
-	sema_init(&s->cow_count, (cow_threshold > 0) ? cow_threshold : INT_MAX);
+	init_waitqueue_head(&s->in_progress_wait);
 
 	s->kcopyd_client = dm_kcopyd_client_create(&dm_kcopyd_throttle);
 	if (IS_ERR(s->kcopyd_client)) {
@@ -1396,17 +1395,54 @@ static void snapshot_dtr(struct dm_target *ti)
 
 	dm_put_device(ti, s->origin);
 
+	WARN_ON(s->in_progress);
+
 	kfree(s);
 }
 
 static void account_start_copy(struct dm_snapshot *s)
 {
-	down(&s->cow_count);
+	spin_lock(&s->in_progress_wait.lock);
+	s->in_progress++;
+	spin_unlock(&s->in_progress_wait.lock);
 }
 
 static void account_end_copy(struct dm_snapshot *s)
 {
-	up(&s->cow_count);
+	spin_lock(&s->in_progress_wait.lock);
+	BUG_ON(!s->in_progress);
+	s->in_progress--;
+	if (likely(s->in_progress <= cow_threshold) &&
+	    unlikely(waitqueue_active(&s->in_progress_wait)))
+		wake_up_locked(&s->in_progress_wait);
+	spin_unlock(&s->in_progress_wait.lock);
+}
+
+static bool wait_for_in_progress(struct dm_snapshot *s, bool unlock_origins)
+{
+	if (unlikely(s->in_progress > cow_threshold)) {
+		spin_lock(&s->in_progress_wait.lock);
+		if (likely(s->in_progress > cow_threshold)) {
+			/*
+			 * NOTE: this throttle doesn't account for whether
+			 * the caller is servicing an IO that will trigger a COW
+			 * so excess throttling may result for chunks not required
+			 * to be COW'd.  But if cow_threshold was reached, extra
+			 * throttling is unlikely to negatively impact performance.
+			 */
+			DECLARE_WAITQUEUE(wait, current);
+			__add_wait_queue(&s->in_progress_wait, &wait);
+			__set_current_state(TASK_UNINTERRUPTIBLE);
+			spin_unlock(&s->in_progress_wait.lock);
+			if (unlock_origins)
+				up_read(&_origins_lock);
+			io_schedule();
+			remove_wait_queue(&s->in_progress_wait, &wait);
+			return false;
+		}
+		spin_unlock(&s->in_progress_wait.lock);
+	}
+	return true;
 }
 
 /*
@@ -1424,7 +1460,7 @@ static void flush_bios(struct bio *bio)
 	}
 }
 
-static int do_origin(struct dm_dev *origin, struct bio *bio);
+static int do_origin(struct dm_dev *origin, struct bio *bio, bool limit);
 
 /*
  * Flush a list of buffers.
@@ -1437,7 +1473,7 @@ static void retry_origin_bios(struct dm_snapshot *s, struct bio *bio)
 	while (bio) {
 		n = bio->bi_next;
 		bio->bi_next = NULL;
-		r = do_origin(s->origin, bio);
+		r = do_origin(s->origin, bio, false);
 		if (r == DM_MAPIO_REMAPPED)
 			generic_make_request(bio);
 		bio = n;
@@ -1726,8 +1762,11 @@ static int snapshot_map(struct dm_target *ti, struct bio *bio)
 	if (!s->valid)
 		return -EIO;
 
-	/* FIXME: should only take write lock if we need
-	 * to copy an exception */
+	if (bio_data_dir(bio) == WRITE) {
+		while (unlikely(!wait_for_in_progress(s, false)))
+			; /* wait_for_in_progress() has slept */
+	}
+
 	mutex_lock(&s->lock);
 
 	if (!s->valid || (unlikely(s->snapshot_overflowed) &&
@@ -1876,7 +1915,7 @@ redirect_to_origin:
 
 	if (bio_data_dir(bio) == WRITE) {
 		mutex_unlock(&s->lock);
-		return do_origin(s->origin, bio);
+		return do_origin(s->origin, bio, false);
 	}
 
 out_unlock:
@@ -2212,15 +2251,24 @@ next_snapshot:
 /*
  * Called on a write from the origin driver.
  */
-static int do_origin(struct dm_dev *origin, struct bio *bio)
+static int do_origin(struct dm_dev *origin, struct bio *bio, bool limit)
 {
 	struct origin *o;
 	int r = DM_MAPIO_REMAPPED;
 
+again:
 	down_read(&_origins_lock);
 	o = __lookup_origin(origin->bdev);
-	if (o)
+	if (o) {
+		if (limit) {
+			struct dm_snapshot *s;
+			list_for_each_entry(s, &o->snapshots, list)
+				if (unlikely(!wait_for_in_progress(s, true)))
+					goto again;
+		}
+
 		r = __origin_write(&o->snapshots, bio->bi_iter.bi_sector, bio);
+	}
 	up_read(&_origins_lock);
 
 	return r;
@@ -2333,7 +2381,7 @@ static int origin_map(struct dm_target *ti, struct bio *bio)
 		dm_accept_partial_bio(bio, available_sectors);
 
 	/* Only tell snapshots if this is a write */
-	return do_origin(o->dev, bio);
+	return do_origin(o->dev, bio, true);
 }
 
 static long origin_direct_access(struct dm_target *ti, sector_t sector,
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 4/62 dm: Use kzalloc for all structs with embedded biosets/mempools

In reply to Greg Kroah-Hartman

From: Kent Overstreet <[email protected]>

[ Upstream commit d377535405686f735b90a8ad4ba269484cd7c96e ]

mempool_init()/bioset_init() require that the mempools/biosets be zeroed first; they probably should not _require_ this, but not allocating those structs with kzalloc is a fairly nonsensical thing to do (calling mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal and safe, but only works if said memory was zeroed.)

---
 drivers/md/dm-bio-prison.c  | 2 +-
 drivers/md/dm-io.c          | 2 +-
 drivers/md/dm-kcopyd.c      | 2 +-
 drivers/md/dm-region-hash.c | 2 +-
 drivers/md/dm-snap.c        | 2 +-
 drivers/md/dm-thin.c        | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)
drivers/md/dm-bio-prison.c +1 -1
index 03af174485d30..fa2432a89bace 100644
@@ -32,7 +32,7 @@ static struct kmem_cache *_cell_cache;
  */
 struct dm_bio_prison *dm_bio_prison_create(void)
 {
-	struct dm_bio_prison *prison = kmalloc(sizeof(*prison), GFP_KERNEL);
+	struct dm_bio_prison *prison = kzalloc(sizeof(*prison), GFP_KERNEL);
 
 	if (!prison)
 		return NULL;
drivers/md/dm-io.c +1 -1
index ee6045d6c0bb3..201d90f5d1b3b 100644
@@ -50,7 +50,7 @@ struct dm_io_client *dm_io_client_create(void)
 	struct dm_io_client *client;
 	unsigned min_ios = dm_get_reserved_bio_based_ios();
 
-	client = kmalloc(sizeof(*client), GFP_KERNEL);
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
 	if (!client)
 		return ERR_PTR(-ENOMEM);
 
drivers/md/dm-kcopyd.c +1 -1
index e0cfde3501e0d..4609c5b481e23 100644
@@ -828,7 +828,7 @@ struct dm_kcopyd_client *dm_kcopyd_client_create(struct dm_kcopyd_throttle *thro
 	int r = -ENOMEM;
 	struct dm_kcopyd_client *kc;
 
-	kc = kmalloc(sizeof(*kc), GFP_KERNEL);
+	kc = kzalloc(sizeof(*kc), GFP_KERNEL);
 	if (!kc)
 		return ERR_PTR(-ENOMEM);
 
drivers/md/dm-region-hash.c +1 -1
index 85c32b22a420a..91c6f6d72eeec 100644
@@ -179,7 +179,7 @@ struct dm_region_hash *dm_region_hash_create(
 		;
 	nr_buckets >>= 1;
 
-	rh = kmalloc(sizeof(*rh), GFP_KERNEL);
+	rh = kzalloc(sizeof(*rh), GFP_KERNEL);
 	if (!rh) {
 		DMERR("unable to allocate region hash memory");
 		return ERR_PTR(-ENOMEM);
drivers/md/dm-snap.c +1 -1
index cf2f44e500e24..c04d9f22d1607 100644
@@ -1136,7 +1136,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 		origin_mode = FMODE_WRITE;
 	}
 
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	s = kzalloc(sizeof(*s), GFP_KERNEL);
 	if (!s) {
 		ti->error = "Cannot allocate private snapshot structure";
 		r = -ENOMEM;
drivers/md/dm-thin.c +1 -1
index 23a7e108352aa..dcb753dbf86e2 100644
@@ -2965,7 +2965,7 @@ static struct pool *pool_create(struct mapped_device *pool_md,
 		return (struct pool *)pmd;
 	}
 
-	pool = kmalloc(sizeof(*pool), GFP_KERNEL);
+	pool = kzalloc(sizeof(*pool), GFP_KERNEL);
 	if (!pool) {
 		*error = "Error allocating memory for pool";
 		err_p = ERR_PTR(-ENOMEM);
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/62 sc16is7xx: Fix for "Unexpected interrupt: 8"

In reply to Greg Kroah-Hartman

From: Phil Elwell <[email protected]>

[ Upstream commit 30ec514d440cf2c472c8e4b0079af2c731f71a3e ]

The SC16IS752 has an Enhanced Feature Register which is aliased at the same address as the Interrupt Identification Register; accessing it requires that a magic value is written to the Line Configuration Register. If an interrupt is raised while the EFR is mapped in then the ISR won't be able to access the IIR, leading to the "Unexpected interrupt" error messages.

Avoid the problem by claiming a mutex around accesses to the EFR register, also claiming the mutex in the interrupt handler work item (this is equivalent to disabling interrupts to interlock against a non-threaded interrupt handler).

See: https://github.com/raspberrypi/linux/issues/2529

---
 drivers/tty/serial/sc16is7xx.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/tty/serial/sc16is7xx.c +28 -0
index 82451bb6622bd..f80a88d107d7f 100644
@@ -332,6 +332,7 @@ struct sc16is7xx_port {
 	struct kthread_worker		kworker;
 	struct task_struct		*kworker_task;
 	struct kthread_work		irq_work;
+	struct mutex			efr_lock;
 	struct sc16is7xx_one		p[0];
 };
 
@@ -503,6 +504,21 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
 		div /= 4;
 	}
 
+	/* In an amazing feat of design, the Enhanced Features Register shares
+	 * the address of the Interrupt Identification Register, and is
+	 * switched in by writing a magic value (0xbf) to the Line Control
+	 * Register. Any interrupt firing during this time will see the EFR
+	 * where it expects the IIR to be, leading to "Unexpected interrupt"
+	 * messages.
+	 *
+	 * Prevent this possibility by claiming a mutex while accessing the
+	 * EFR, and claiming the same mutex from within the interrupt handler.
+	 * This is similar to disabling the interrupt, but that doesn't work
+	 * because the bulk of the interrupt processing is run as a workqueue
+	 * job in thread context.
+	 */
+	mutex_lock(&s->efr_lock);
+
 	lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
 
 	/* Open the LCR divisors for configuration */
@@ -518,6 +534,8 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
 	/* Put LCR back to the normal mode */
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
 
+	mutex_unlock(&s->efr_lock);
+
 	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
 			      SC16IS7XX_MCR_CLKSEL_BIT,
 			      prescaler);
@@ -700,6 +718,8 @@ static void sc16is7xx_ist(struct kthread_work *ws)
 {
 	struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);
 
+	mutex_lock(&s->efr_lock);
+
 	while (1) {
 		bool keep_polling = false;
 		int i;
@@ -709,6 +729,8 @@ static void sc16is7xx_ist(struct kthread_work *ws)
 		if (!keep_polling)
 			break;
 	}
+
+	mutex_unlock(&s->efr_lock);
 }
 
 static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
@@ -903,6 +925,9 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 	if (!(termios->c_cflag & CREAD))
 		port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
 
+	/* As above, claim the mutex while accessing the EFR. */
+	mutex_lock(&s->efr_lock);
+
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
 			     SC16IS7XX_LCR_CONF_MODE_B);
 
@@ -924,6 +949,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 	/* Update LCR register */
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
 
+	mutex_unlock(&s->efr_lock);
+
 	/* Get baud rate generator configuration */
 	baud = uart_get_baud_rate(port, termios, old,
 				  port->uartclk / 16 / 4 / 0xffff,
@@ -1186,6 +1213,7 @@ static int sc16is7xx_probe(struct device *dev,
 	s->regmap = regmap;
 	s->devtype = devtype;
 	dev_set_drvdata(dev, s);
+	mutex_init(&s->efr_lock);
 
 	kthread_init_worker(&s->kworker);
 	kthread_init_work(&s->irq_work, sc16is7xx_ist);
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/62 HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override

In reply to Greg Kroah-Hartman

From: Julian Sax <[email protected]>

[ Upstream commit 399474e4c1100bca264ed14fa3ad0d68fab484d8 ]

This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.

---
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +8 -0
index cac262a912c12..89f2976f9c534 100644
@@ -330,6 +330,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
 		},
 		.driver_data = (void *)&sipodev_desc
 	},
+	{
+		.ident = "Direkt-Tek DTLAPY133-1",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"),
+		},
+		.driver_data = (void *)&sipodev_desc
+	},
 	{
 		.ident = "Mediacom Flexbook Edge 11",
 		.matches = {
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/62 x86/cpu: Add Atom Tremont (Jacobsville)

In reply to Greg Kroah-Hartman

From: Kan Liang <[email protected]>

[ Upstream commit 00ae831dfe4474ef6029558f5eb3ef0332d80043 ]

Add the Atom Tremont model number to the Intel family list.

[ Tony: Also update comment at head of file to say "_X" suffix is
also used for microserver parts. ]

Cc Andy Shevchenko <[email protected]>
Cc Aristeu Rozanski <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc linux-edac <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
Cc Megha Dey <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Qiuxu Zhuo <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc x86-ml <[email protected]>
---
 arch/x86/include/asm/intel-family.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/include/asm/intel-family.h +2 -1
index ba7b6f7364149..74ee597beb3e4 100644
@@ -5,7 +5,7 @@
  * "Big Core" Processors (Branded as Core, Xeon, etc...)
  *
  * The "_X" parts are generally the EP and EX Xeons, or the
- * "Extreme" ones, like Broadwell-E.
+ * "Extreme" ones, like Broadwell-E, or Atom microserver.
  *
  * Things ending in "2" are usually because we have no better
  * name for them.  There's no processor called "SILVERMONT2".
@@ -67,6 +67,7 @@
 #define INTEL_FAM6_ATOM_GOLDMONT	0x5C /* Apollo Lake */
 #define INTEL_FAM6_ATOM_GOLDMONT_X	0x5F /* Denverton */
 #define INTEL_FAM6_ATOM_GOLDMONT_PLUS	0x7A /* Gemini Lake */
+#define INTEL_FAM6_ATOM_TREMONT_X	0x86 /* Jacobsville */
 
 /* Xeon Phi */
 
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 8/62 HID: i2c-hid: Add Odys Winbook 13 to descriptor override

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit f8f807441eefddc3c6d8a378421f0ede6361d565 ]

The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working.

---
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +8 -0
index 89f2976f9c534..fd1b6eea6d2fd 100644
@@ -346,6 +346,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
 		},
 		.driver_data = (void *)&sipodev_desc
 	},
+	{
+		.ident = "Odys Winbook 13",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AXDIA International GmbH"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WINBOOK 13"),
+		},
+		.driver_data = (void *)&sipodev_desc
+	},
 	{ }	/* Terminate list */
 };
 
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/62 scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks

In reply to Greg Kroah-Hartman

From: Brian Norris <[email protected]>

[ Upstream commit ff64dd4857303dd5550faed9fd598ac90f0f2238 ]

git-diff-index does not refresh the index for you, so using it for a "-dirty" check can give misleading results. Commit 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust") tried to fix this by switching to git-status, but it overlooked the fact that git-status also writes to the .git directory of the source tree, which is definitely not kosher for an out-of-tree (O=) build. That is getting reverted.

Fortunately, git-status now supports avoiding writing to the index via the --no-optional-locks flag, as of git 2.14. It still calculates an up-to-date index, but it avoids writing it out to the .git directory.

So, let's retry the solution from commit 6147b1cf19651 using this new flag first, and if it fails, we assume this is an older version of git and just use the old git-diff-index method.

It's hairy to get the 'grep -vq' (inverted matching) correct by stashing the output of git-status (you have to be careful about the difference betwen "empty stdin" and "blank line on stdin"), so just pipe the output directly to grep and use a regex that's good enough for both the git-status and git-diff-index version.

---
 scripts/setlocalversion | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
scripts/setlocalversion +10 -2
index 966dd3924ea9c..aa28c3f298093 100755
@@ -72,8 +72,16 @@ scm_version()
 			printf -- '-svn%s' "`git svn find-rev $head`"
 		fi
 
-		# Check for uncommitted changes
-		if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then
+		# Check for uncommitted changes.
+		# First, with git-status, but --no-optional-locks is only
+		# supported in git >= 2.14, so fall back to git-diff-index if
+		# it fails. Note that git-diff-index does not refresh the
+		# index, so it may give misleading results. See
+		# git-update-index(1), git-diff-index(1), and git-status(1).
+		if {
+			git --no-optional-locks status -uno --porcelain 2>/dev/null ||
+			git diff-index --name-only HEAD
+		} | grep -qvE '^(.. )?scripts/package'; then
 			printf '%s' -dirty
 		fi
 
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 10/62 usb: handle warm-reset port requests on hub resume

In reply to Greg Kroah-Hartman

From: Jan-Marek Glogowski <[email protected]>

[ Upstream commit 4fdc1790e6a9ef22399c6bc6e63b80f4609f3b7e ]

On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE link state bit is set. Greping all the kernel for this bit shows that the port status requests a warm-reset this way.

This just happens, if its the only device on the root hub, the hub therefore resumes and the HCDs status_urb isn't yet available. If a warm-reset request is detected, this sets the hubs event_bits, which will prevent any auto-suspend and allows the hubs workqueue to warm-reset the port later in port_event.

---
 drivers/usb/core/hub.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/usb/core/hub.c +7 -0
index 63646dc3ca27d..4a87cc4783404 100644
@@ -102,6 +102,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
+static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
+		u16 portstatus);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
@@ -1108,6 +1110,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 						   USB_PORT_FEAT_ENABLE);
 		}
 
+		/* Make sure a warm-reset request is handled by port_event */
+		if (type == HUB_RESUME &&
+		    hub_port_warm_reset_required(hub, port1, portstatus))
+			set_bit(port1, hub->event_bits);
+
 		/*
 		 * Add debounce if USB3 link is in polling/link training state.
 		 * Link will automatically transition to Enabled state after
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 11/62 rtc: pcf8523: set xtal load capacitance from DT

In reply to Greg Kroah-Hartman

From: Sam Ravnborg <[email protected]>

[ Upstream commit 189927e719e36ceefbb8037f23d3849e47833aef ]

Add support for specifying the xtal load capacitance in the DT node. The pcf8523 supports xtal load capacitance of 7pF or 12.5pF. If the rtc has the wrong configuration the time will drift several hours/week.

The driver use the default value 12.5pF.

The DT may specify either 7000fF or 12500fF.
(The DT uses femto Farad to avoid decimal numbers). Other values are warned and the driver uses the default value.

---
 drivers/rtc/rtc-pcf8523.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)
drivers/rtc/rtc-pcf8523.c +20 -8
index 3c8c6f942e67f..a06792966ea90 100644
@@ -94,8 +94,9 @@ static int pcf8523_voltage_low(struct i2c_client *client)
 	return !!(value & REG_CONTROL3_BLF);
 }
 
-static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
+static int pcf8523_load_capacitance(struct i2c_client *client)
 {
+	u32 load;
 	u8 value;
 	int err;
 
@@ -103,14 +104,24 @@ static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
 	if (err < 0)
 		return err;
 
-	if (!high)
-		value &= ~REG_CONTROL1_CAP_SEL;
-	else
+	load = 12500;
+	of_property_read_u32(client->dev.of_node, "quartz-load-femtofarads",
+			     &load);
+
+	switch (load) {
+	default:
+		dev_warn(&client->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 12500",
+			 load);
+		/* fall through */
+	case 12500:
 		value |= REG_CONTROL1_CAP_SEL;
+		break;
+	case 7000:
+		value &= ~REG_CONTROL1_CAP_SEL;
+		break;
+	}
 
 	err = pcf8523_write(client, REG_CONTROL1, value);
-	if (err < 0)
-		return err;
 
 	return err;
 }
@@ -307,9 +318,10 @@ static int pcf8523_probe(struct i2c_client *client,
 	if (!pcf)
 		return -ENOMEM;
 
-	err = pcf8523_select_capacitance(client, true);
+	err = pcf8523_load_capacitance(client);
 	if (err < 0)
-		return err;
+		dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
+			 err);
 
 	err = pcf8523_set_pm(client, 0);
 	if (err < 0)
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 12/62 exec: load_script: Do not exec truncated interpreter path

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit b5372fe5dc84235dbe04998efdede3c4daa866a9 ]

Commit 8099b047ecc4 ("exec: load_script: don't blindly truncate shebang string") was trying to protect against a confused exec of a truncated interpreter path. However, it was overeager and also refused to truncate arguments as well, which broke userspace, and it was reverted. This attempts the protection again, but allows arguments to remain truncated. In an effort to improve readability, helper functions and comments have been added.

Cc Andrew Morton <[email protected]>
Cc Oleg Nesterov <[email protected]>
Cc Samuel Dionne-Riel <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc Graham Christensen <[email protected]>
Cc Michal Hocko <[email protected]>
---
 fs/binfmt_script.c | 57 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 48 insertions(+), 9 deletions(-)
fs/binfmt_script.c +48 -9
index afdf4e3cafc2a..37c2093a24d3c 100644
@@ -14,14 +14,31 @@
 #include <linux/err.h>
 #include <linux/fs.h>
 
+static inline bool spacetab(char c) { return c == ' ' || c == '\t'; }
+static inline char *next_non_spacetab(char *first, const char *last)
+{
+	for (; first <= last; first++)
+		if (!spacetab(*first))
+			return first;
+	return NULL;
+}
+static inline char *next_terminator(char *first, const char *last)
+{
+	for (; first <= last; first++)
+		if (spacetab(*first) || !*first)
+			return first;
+	return NULL;
+}
+
 static int load_script(struct linux_binprm *bprm)
 {
 	const char *i_arg, *i_name;
-	char *cp;
+	char *cp, *buf_end;
 	struct file *file;
 	char interp[BINPRM_BUF_SIZE];
 	int retval;
 
+	/* Not ours to exec if we don't start with "#!". */
 	if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!'))
 		return -ENOEXEC;
 
@@ -34,18 +51,40 @@ static int load_script(struct linux_binprm *bprm)
 	if (bprm->interp_flags & BINPRM_FLAGS_PATH_INACCESSIBLE)
 		return -ENOENT;
 
-	/*
-	 * This section does the #! interpretation.
-	 * Sorta complicated, but hopefully it will work.  -TYT
-	 */
-
+	/* Release since we are not mapping a binary into memory. */
 	allow_write_access(bprm->file);
 	fput(bprm->file);
 	bprm->file = NULL;
 
-	bprm->buf[BINPRM_BUF_SIZE - 1] = '\0';
-	if ((cp = strchr(bprm->buf, '\n')) == NULL)
-		cp = bprm->buf+BINPRM_BUF_SIZE-1;
+	/*
+	 * This section handles parsing the #! line into separate
+	 * interpreter path and argument strings. We must be careful
+	 * because bprm->buf is not yet guaranteed to be NUL-terminated
+	 * (though the buffer will have trailing NUL padding when the
+	 * file size was smaller than the buffer size).
+	 *
+	 * We do not want to exec a truncated interpreter path, so either
+	 * we find a newline (which indicates nothing is truncated), or
+	 * we find a space/tab/NUL after the interpreter path (which
+	 * itself may be preceded by spaces/tabs). Truncating the
+	 * arguments is fine: the interpreter can re-read the script to
+	 * parse them on its own.
+	 */
+	buf_end = bprm->buf + sizeof(bprm->buf) - 1;
+	cp = strnchr(bprm->buf, sizeof(bprm->buf), '\n');
+	if (!cp) {
+		cp = next_non_spacetab(bprm->buf + 2, buf_end);
+		if (!cp)
+			return -ENOEXEC; /* Entire buf is spaces/tabs */
+		/*
+		 * If there is no later space/tab/NUL we must assume the
+		 * interpreter path is truncated.
+		 */
+		if (!next_terminator(cp, buf_end))
+			return -ENOEXEC;
+		cp = buf_end;
+	}
+	/* NUL-terminate the buffer and any trailing spaces/tabs. */
 	*cp = '\0';
 	while (cp > bprm->buf) {
 		cp--;
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 13/62 iio: fix center temperature of bmc150-accel-core

In reply to Greg Kroah-Hartman

From: Pascal Bouwmann <[email protected]>

[ Upstream commit 6c59a962e081df6d8fe43325bbfabec57e0d4751 ]

The center temperature of the supported devices stored in the constant BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees.

It seems that some datasheets were inconsistent on this value leading to the error. For most usecases will only make minor difference so not queued for stable.

---
 drivers/iio/accel/bmc150-accel-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/accel/bmc150-accel-core.c +1 -1
index c3888822add1a..b6254ce9ab3b3 100644
@@ -125,7 +125,7 @@
 #define BMC150_ACCEL_SLEEP_1_SEC		0x0F
 
 #define BMC150_ACCEL_REG_TEMP			0x08
-#define BMC150_ACCEL_TEMP_CENTER_VAL		24
+#define BMC150_ACCEL_TEMP_CENTER_VAL		23
 
 #define BMC150_ACCEL_AXIS_TO_REG(axis)	(BMC150_ACCEL_REG_XOUT_L + (axis * 2))
 #define BMC150_AUTO_SUSPEND_DELAY_MS		2000
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 14/62 perf map: Fix overlapped map handling

In reply to Greg Kroah-Hartman

From: Steve MacLean <[email protected]>

[ Upstream commit ee212d6ea20887c0ef352be8563ca13dbf965906 ]

Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new entry. If a new map overlaps a previous map, the overlapped section of the previous map is effectively unmapped, but the non-overlapping sections are still valid.

maps__fixup_overlappings() is responsible for creating any new map entries from the previously overlapped map. It optionally creates a before and an after map.

When creating the after map the existing code failed to adjust the map.pgoff. This meant the new after map would incorrectly calculate the file offset for the ip. This results in incorrect symbol name resolution for any ip in the after region.

Make maps__fixup_overlappings() correctly populate map.pgoff.

Add an assert that new mapping matches old mapping at the beginning of the after map.

Committer-testing:

Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9 (which didn't strip symbols).

Preparation:

  ~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
  cd perfSymbol
  ~/dotnet3.0-preview9/dotnet publish
  perf record ~/dotnet3.0-preview9/dotnet \
      bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
  ^C

Before:

  perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
     grep libcoreclr.so | head -n 4
        dotnet  1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
            r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.705249:     250000 cpu-clock: \
             7fe6159a1f99 [unknown] \
             (.../3.0.0-preview9-19423-09/libcoreclr.so)

After:

  perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
     grep libcoreclr.so | head -n 4
        dotnet  1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
            r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so

All the [unknown] symbols were resolved.

---
 tools/perf/util/map.c | 3 +++
 1 file changed, 3 insertions(+)
tools/perf/util/map.c +3 -0
index c662fef95d144..df6892596dc27 100644
@@ -1,4 +1,5 @@
 #include "symbol.h"
+#include <assert.h>
 #include <errno.h>
 #include <inttypes.h>
 #include <limits.h>
@@ -716,6 +717,8 @@ static int maps__fixup_overlappings(struct maps *maps, struct map *map, FILE *fp
 			}
 
 			after->start = map->end;
+			after->pgoff += map->end - pos->start;
+			assert(pos->map_ip(pos, map->end) == after->map_ip(after, map->end));
 			__map_groups__insert(pos->groups, after);
 			if (verbose >= 2)
 				map__fprintf(after, fp);
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 15/62 perf jevents: Fix period for Intel fixed counters

In reply to Greg Kroah-Hartman

From: Andi Kleen <[email protected]>

[ Upstream commit 6bdfd9f118bd59cf0f85d3bf4b72b586adea17c1 ]

The Intel fixed counters use a special table to override the JSON information.

During this override the period information from the JSON file got dropped, which results in inst_retired.any and similar running with frequency mode instead of a period.

Just specify the expected period in the table.

---
 tools/perf/pmu-events/jevents.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
tools/perf/pmu-events/jevents.c +6 -6
index 016d12af68773..0619054bd7a0d 100644
@@ -311,12 +311,12 @@ static struct fixed {
 	const char *name;
 	const char *event;
 } fixed[] = {
-	{ "inst_retired.any", "event=0xc0" },
-	{ "inst_retired.any_p", "event=0xc0" },
-	{ "cpu_clk_unhalted.ref", "event=0x0,umask=0x03" },
-	{ "cpu_clk_unhalted.thread", "event=0x3c" },
-	{ "cpu_clk_unhalted.core", "event=0x3c" },
-	{ "cpu_clk_unhalted.thread_any", "event=0x3c,any=1" },
+	{ "inst_retired.any", "event=0xc0,period=2000003" },
+	{ "inst_retired.any_p", "event=0xc0,period=2000003" },
+	{ "cpu_clk_unhalted.ref", "event=0x0,umask=0x03,period=2000003" },
+	{ "cpu_clk_unhalted.thread", "event=0x3c,period=2000003" },
+	{ "cpu_clk_unhalted.core", "event=0x3c,period=2000003" },
+	{ "cpu_clk_unhalted.thread_any", "event=0x3c,any=1,period=2000003" },
 	{ NULL, NULL},
 };
 
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 16/62 staging: rtl8188eu: fix null dereference when kzalloc fails

In reply to Greg Kroah-Hartman

From: Connor Kuehl <[email protected]>

[ Upstream commit 955c1532a34305f2f780b47f0c40cc7c65500810 ]

If kzalloc() returns NULL, the error path doesn't stop the flow of control from entering rtw_hal_read_chip_version() which dereferences the null pointer. Fix this by adding a 'goto' to the error path to more gracefully handle the issue and avoid proceeding with initialization steps that we're no longer prepared to handle.

Also update the debug message to be more consistent with the other debug messages in this function.

Addresses-Coverity: ("Dereference after null check")

---
 drivers/staging/rtl8188eu/os_dep/usb_intf.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/staging/rtl8188eu/os_dep/usb_intf.c +4 -2
index d22360849b883..d4a7d740fc620 100644
@@ -366,8 +366,10 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	}
 
 	padapter->HalData = kzalloc(sizeof(struct hal_data_8188e), GFP_KERNEL);
-	if (!padapter->HalData)
-		DBG_88E("cant not alloc memory for HAL DATA\n");
+	if (!padapter->HalData) {
+		DBG_88E("Failed to allocate memory for HAL data\n");
+		goto free_adapter;
+	}
 
 	padapter->intf_start = &usb_intf_start;
 	padapter->intf_stop = &usb_intf_stop;
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/62 RDMA/iwcm: Fix a lock inversion issue

In reply to Greg Kroah-Hartman

From: Bart Van Assche <[email protected]>

[ Upstream commit b66f31efbdad95ec274345721d99d1d835e6de01 ]

This patch fixes the lock inversion complaint:

============================================
WARNING: possible recursive locking detected
5.3.0-rc7-dbg+ #1 Not tainted
--------------------------------------------
kworker/u16:6/171 is trying to acquire lock:
00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm]

but task is already holding lock:
00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

other info that might help us debug this:

 Possible unsafe locking scenario:
       CPU0
       ----

lock(&id_priv->handler_mutex);
lock(&id_priv->handler_mutex);

*** DEADLOCK ***

May be due to missing lock nesting notation

3 locks held by kworker/u16:6/171:
#0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

stack backtrace:
CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
 dump_stack+0x8a/0xd6
 __lock_acquire.cold+0xe1/0x24d
 lock_acquire+0x106/0x240
 __mutex_lock+0x12e/0xcb0
 mutex_lock_nested+0x1f/0x30
 rdma_destroy_id+0x78/0x4a0 [rdma_cm]
 iw_conn_req_handler+0x5c9/0x680 [rdma_cm]
 cm_work_handler+0xe62/0x1100 [iw_cm]
 process_one_work+0x56d/0xac0
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

This is not a bug as there are actually two lock classes here.

Fixes de910bd92137 ("RDMA/cma: Simplify locking needed for serialization of callbacks")
---
 drivers/infiniband/core/cma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/core/cma.c +2 -1
index 85d4ef319c905..dcfbf326f45c9 100644
@@ -2119,9 +2119,10 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id,
 		conn_id->cm_id.iw = NULL;
 		cma_exch(conn_id, RDMA_CM_DESTROYING);
 		mutex_unlock(&conn_id->handler_mutex);
+		mutex_unlock(&listen_id->handler_mutex);
 		cma_deref_id(conn_id);
 		rdma_destroy_id(&conn_id->id);
-		goto out;
+		return ret;
 	}
 
 	mutex_unlock(&conn_id->handler_mutex);
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 18/62 gpio: max77620: Use correct unit for debounce times

In reply to Greg Kroah-Hartman

From: Thierry Reding <[email protected]>

[ Upstream commit fffa6af94894126994a7600c6f6f09b892e89fa9 ]

The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit.

---
 drivers/gpio/gpio-max77620.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpio/gpio-max77620.c +3 -3
index b46b436cb97fe..4fe0be5aa2945 100644
@@ -167,13 +167,13 @@ static int max77620_gpio_set_debounce(struct gpio_chip *gc,
 	case 0:
 		val = MAX77620_CNFG_GPIO_DBNC_None;
 		break;
-	case 1 ... 8:
+	case 1000 ... 8000:
 		val = MAX77620_CNFG_GPIO_DBNC_8ms;
 		break;
-	case 9 ... 16:
+	case 9000 ... 16000:
 		val = MAX77620_CNFG_GPIO_DBNC_16ms;
 		break;
-	case 17 ... 32:
+	case 17000 ... 32000:
 		val = MAX77620_CNFG_GPIO_DBNC_32ms;
 		break;
 	default:
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 19/62 fs: cifs: mute -Wunused-const-variable message

In reply to Greg Kroah-Hartman

From: Austin Kim <[email protected]>

[ Upstream commit dd19c106a36690b47bb1acc68372f2b472b495b8 ]

After 'Initial git repository build' commit, 'mapping_table_ERRHRD' variable has not been used.

So 'mapping_table_ERRHRD' const variable could be removed to mute below warning message:

fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable]

   static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
                                           ^
---
 fs/cifs/netmisc.c | 4 ----
 1 file changed, 4 deletions(-)
fs/cifs/netmisc.c +0 -4
index cc88f4f0325ef..bed9733302279 100644
@@ -130,10 +130,6 @@ static const struct smb_to_posix_error mapping_table_ERRSRV[] = {
 	{0, 0}
 };
 
-static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
-	{0, 0}
-};
-
 /*
  * Convert a string containing text IPv4 or IPv6 address to binary form.
  *
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/62 serial: mctrl_gpio: Check for NULL pointer

In reply to Greg Kroah-Hartman

From: Adam Ford <[email protected]>

[ Upstream commit 37e3ab00e4734acc15d96b2926aab55c894f4d9c ]

When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL.

---
 drivers/tty/serial/serial_mctrl_gpio.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/tty/serial/serial_mctrl_gpio.c +3 -0
index d2da6aa7f27d0..1bb15edcf1e77 100644
@@ -68,6 +68,9 @@ EXPORT_SYMBOL_GPL(mctrl_gpio_set);
 struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
 				      enum mctrl_gpio_idx gidx)
 {
+	if (gpios == NULL)
+		return NULL;
+
 	return gpios->gpio[gidx];
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 21/62 efi/cper: Fix endianness of PCIe class code

In reply to Greg Kroah-Hartman

From: Lukas Wunner <[email protected]>

[ Upstream commit 6fb9367a15d1a126d222d738b2702c7958594a5f ]

The CPER parser assumes that the class code is big endian, but at least on this edk2-derived Intel Purley platform it's little endian:

    efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843
    DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017

    {1}[Hardware Error]:   device_id: 0000:5d:00.0
    {1}[Hardware Error]:   slot: 0
    {1}[Hardware Error]:   secondary_bus: 0x5e
    {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x2030
    {1}[Hardware Error]:   class_code: 000406
                                       ^^^^^^ (should be 060400)
Cc Ben Dooks <[email protected]>
Cc Dave Young <[email protected]>
Cc Jarkko Sakkinen <[email protected]>
Cc Jerry Snitselaar <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Lyude Paul <[email protected]>
Cc Matthew Garrett <[email protected]>
Cc Octavian Purdila <[email protected]>
Cc Peter Jones <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Scott Talbert <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 drivers/firmware/efi/cper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/efi/cper.c +1 -1
index f40f7df4b7344..c0e54396f2502 100644
@@ -375,7 +375,7 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 		printk("%s""vendor_id: 0x%04x, device_id: 0x%04x\n", pfx,
 		       pcie->device_id.vendor_id, pcie->device_id.device_id);
 		p = pcie->device_id.class_code;
-		printk("%s""class_code: %02x%02x%02x\n", pfx, p[0], p[1], p[2]);
+		printk("%s""class_code: %02x%02x%02x\n", pfx, p[2], p[1], p[0]);
 	}
 	if (pcie->validation_bits & CPER_PCIE_VALID_SERIAL_NUMBER)
 		printk("%s""serial number: 0x%04x, 0x%04x\n", pfx,
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 22/62 efi/x86: Do not clean dummy variable in kexec path

In reply to Greg Kroah-Hartman

From: Dave Young <[email protected]>

[ Upstream commit 2ecb7402cfc7f22764e7bbc80790e66eadb20560 ]

kexec reboot fails randomly in UEFI based KVM guest. The firmware just resets while calling efi_delete_dummy_variable(); Unfortunately I don't know how to debug the firmware, it is also possible a potential problem on real hardware as well although nobody reproduced it.

The intention of the efi_delete_dummy_variable is to trigger garbage collection when entering virtual mode. But SetVirtualAddressMap can only run once for each physical reboot, thus kexec_enter_virtual_mode() is not necessarily a good place to clean a dummy object.

Drop the efi_delete_dummy_variable so that kexec reboot can work.

---
 arch/x86/platform/efi/efi.c | 3 ---
 1 file changed, 3 deletions(-)
arch/x86/platform/efi/efi.c +0 -3
index a0e85f2aff7d8..b6669d326545a 100644
@@ -896,9 +896,6 @@ static void __init kexec_enter_virtual_mode(void)
 
 	if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX))
 		runtime_code_page_mkexec();
-
-	/* clean DUMMY object */
-	efi_delete_dummy_variable();
 #endif
 }
 
Signature · 1 line
2.20.1
author maintainer
#23 lore raw

PATCH 23/62 ocfs2: clear zero in unaligned direct IO

In reply to Greg Kroah-Hartman

From: Jia Guo <[email protected]>

[ Upstream commit 7a243c82ea527cd1da47381ad9cd646844f3b693 ]

Unused portion of a part-written fs-block-sized block is not set to zero in unaligned append direct write.This can lead to serious data inconsistencies.

Ocfs2 manage disk with cluster size(for example, 1M), part-written in one cluster will change the cluster state from UN-WRITTEN to WRITTEN, VFS(function dio_zero_block) doesn't do the cleaning because bh's state is not set to NEW in function ocfs2_dio_wr_get_block when we write a WRITTEN cluster. For example, the cluster size is 1M, file size is 8k and we direct write from 14k to 15k, then 12k~14k and 15k~16k will contain dirty data.

We have to deal with two cases:
1.The starting position of direct write is outside the file. 2.The starting position of direct write is located in the file.

We need set bh's state to NEW in the first case. In the second case, we need mapped twice because bh's state of area out file should be set to NEW while area in file not.

---
 fs/ocfs2/aops.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
fs/ocfs2/aops.c +21 -1
index c26d046adaaac..7c20a23c0ed7d 100644
@@ -2143,13 +2143,30 @@ static int ocfs2_dio_wr_get_block(struct inode *inode, sector_t iblock,
 	struct ocfs2_dio_write_ctxt *dwc = NULL;
 	struct buffer_head *di_bh = NULL;
 	u64 p_blkno;
-	loff_t pos = iblock << inode->i_sb->s_blocksize_bits;
+	unsigned int i_blkbits = inode->i_sb->s_blocksize_bits;
+	loff_t pos = iblock << i_blkbits;
+	sector_t endblk = (i_size_read(inode) - 1) >> i_blkbits;
 	unsigned len, total_len = bh_result->b_size;
 	int ret = 0, first_get_block = 0;
 
 	len = osb->s_clustersize - (pos & (osb->s_clustersize - 1));
 	len = min(total_len, len);
 
+	/*
+	 * bh_result->b_size is count in get_more_blocks according to write
+	 * "pos" and "end", we need map twice to return different buffer state:
+	 * 1. area in file size, not set NEW;
+	 * 2. area out file size, set  NEW.
+	 *
+	 *		   iblock    endblk
+	 * |--------|---------|---------|---------
+	 * |<-------area in file------->|
+	 */
+
+	if ((iblock <= endblk) &&
+	    ((iblock + ((len - 1) >> i_blkbits)) > endblk))
+		len = (endblk - iblock + 1) << i_blkbits;
+
 	mlog(0, "get block of %lu at %llu:%u req %u\n",
 			inode->i_ino, pos, len, total_len);
 
@@ -2233,6 +2250,9 @@ static int ocfs2_dio_wr_get_block(struct inode *inode, sector_t iblock,
 	if (desc->c_needs_zero)
 		set_buffer_new(bh_result);
 
+	if (iblock > endblk)
+		set_buffer_new(bh_result);
+
 	/* May sleep in end_io. It should not happen in a irq context. So defer
 	 * it to dio work queue. */
 	set_buffer_defer_completion(bh_result);
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 24/62 fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 56e94ea132bb5c2c1d0b60a6aeb34dcb7d71a53d ]

In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to check whether loc->xl_entry is NULL:

    if (loc->xl_entry)

When loc->xl_entry is NULL, it is used on line 2158:

    ocfs2_xa_add_entry(loc, name_hash);
        loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
        loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);

and line 2164:

    ocfs2_xa_add_namevalue(loc, xi);
        loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len);
        loc->xl_entry->xe_name_len = xi->xi_name_len;

Thus, possible null-pointer dereferences may occur.

To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry() abnormally returns with -EINVAL.

These bugs are found by a static analysis tool STCheck written by us.

---
 fs/ocfs2/xattr.c | 56 ++++++++++++++++++++----------------------------
 1 file changed, 23 insertions(+), 33 deletions(-)
fs/ocfs2/xattr.c +23 -33
index e108c945ac1f8..c387467d574cb 100644
@@ -1497,18 +1497,6 @@ static int ocfs2_xa_check_space(struct ocfs2_xa_loc *loc,
 	return loc->xl_ops->xlo_check_space(loc, xi);
 }
 
-static void ocfs2_xa_add_entry(struct ocfs2_xa_loc *loc, u32 name_hash)
-{
-	loc->xl_ops->xlo_add_entry(loc, name_hash);
-	loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
-	/*
-	 * We can't leave the new entry's xe_name_offset at zero or
-	 * add_namevalue() will go nuts.  We set it to the size of our
-	 * storage so that it can never be less than any other entry.
-	 */
-	loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);
-}
-
 static void ocfs2_xa_add_namevalue(struct ocfs2_xa_loc *loc,
 				   struct ocfs2_xattr_info *xi)
 {
@@ -2140,29 +2128,31 @@ static int ocfs2_xa_prepare_entry(struct ocfs2_xa_loc *loc,
 	if (rc)
 		goto out;
 
-	if (loc->xl_entry) {
-		if (ocfs2_xa_can_reuse_entry(loc, xi)) {
-			orig_value_size = loc->xl_entry->xe_value_size;
-			rc = ocfs2_xa_reuse_entry(loc, xi, ctxt);
-			if (rc)
-				goto out;
-			goto alloc_value;
-		}
+	if (!loc->xl_entry) {
+		rc = -EINVAL;
+		goto out;
+	}
 
-		if (!ocfs2_xattr_is_local(loc->xl_entry)) {
-			orig_clusters = ocfs2_xa_value_clusters(loc);
-			rc = ocfs2_xa_value_truncate(loc, 0, ctxt);
-			if (rc) {
-				mlog_errno(rc);
-				ocfs2_xa_cleanup_value_truncate(loc,
-								"overwriting",
-								orig_clusters);
-				goto out;
-			}
+	if (ocfs2_xa_can_reuse_entry(loc, xi)) {
+		orig_value_size = loc->xl_entry->xe_value_size;
+		rc = ocfs2_xa_reuse_entry(loc, xi, ctxt);
+		if (rc)
+			goto out;
+		goto alloc_value;
+	}
+
+	if (!ocfs2_xattr_is_local(loc->xl_entry)) {
+		orig_clusters = ocfs2_xa_value_clusters(loc);
+		rc = ocfs2_xa_value_truncate(loc, 0, ctxt);
+		if (rc) {
+			mlog_errno(rc);
+			ocfs2_xa_cleanup_value_truncate(loc,
+							"overwriting",
+							orig_clusters);
+			goto out;
 		}
-		ocfs2_xa_wipe_namevalue(loc);
-	} else
-		ocfs2_xa_add_entry(loc, name_hash);
+	}
+	ocfs2_xa_wipe_namevalue(loc);
 
 	/*
 	 * If we get here, we have a blank entry.  Fill it.  We grow our
Signature · 1 line
2.20.1
author maintainer
#25 lore raw

PATCH 25/62 fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 583fee3e12df0e6f1f66f063b989d8e7fed0e65a ]

In ocfs2_write_end_nolock(), there are an if statement on lines 1976, 2047 and 2058, to check whether handle is NULL:

if (handle)

When handle is NULL, it is used on line 2045:

	ocfs2_update_inode_fsync_trans(handle, inode, 1);
        oi->i_sync_tid = handle->h_transaction->t_tid;

Thus, a possible null-pointer dereference may occur.

To fix this bug, handle is checked before calling
ocfs2_update_inode_fsync_trans().

This bug is found by a static analysis tool STCheck written by us.

---
 fs/ocfs2/aops.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ocfs2/aops.c +2 -1
index 7c20a23c0ed7d..6ad76397b31de 100644
@@ -2046,7 +2046,8 @@ out_write_size:
 		inode->i_mtime = inode->i_ctime = current_time(inode);
 		di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
 		di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
-		ocfs2_update_inode_fsync_trans(handle, inode, 1);
+		if (handle)
+			ocfs2_update_inode_fsync_trans(handle, inode, 1);
 	}
 	if (handle)
 		ocfs2_journal_dirty(handle, wc->w_di_bh);
Signature · 1 line
2.20.1
author maintainer
#26 lore raw

PATCH 26/62 fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 2abb7d3b12d007c30193f48bebed781009bebdd2 ]

In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283 to check whether inode_alloc is NULL:

if (inode_alloc)

When inode_alloc is NULL, it is used on line 287:

    ocfs2_inode_lock(inode_alloc, &bh, 0);
        ocfs2_inode_lock_full_nested(inode, ...)
            struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);

Thus, a possible null-pointer dereference may occur.

To fix this bug, inode_alloc is checked on line 286.

This bug is found by a static analysis tool STCheck written by us.

---
 fs/ocfs2/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ocfs2/ioctl.c +1 -1
index 4506ec5ec2ea6..bfc44644301ca 100644
@@ -289,7 +289,7 @@ static int ocfs2_info_scan_inode_alloc(struct ocfs2_super *osb,
 	if (inode_alloc)
 		inode_lock(inode_alloc);
 
-	if (o2info_coherent(&fi->ifi_req)) {
+	if (inode_alloc && o2info_coherent(&fi->ifi_req)) {
 		status = ocfs2_inode_lock(inode_alloc, &bh, 0);
 		if (status < 0) {
 			mlog_errno(status);
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 27/62 MIPS: fw: sni: Fix out of bounds init of o32 stack

In reply to Greg Kroah-Hartman

From: Thomas Bogendoerfer <[email protected]>

[ Upstream commit efcb529694c3b707dc0471b312944337ba16e4dd ]

Use ARRAY_SIZE to caluculate the top of the o32 stack.

---
 arch/mips/fw/sni/sniprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/fw/sni/sniprom.c +1 -1
index 6aa264b9856ac..7c6151d412bd7 100644
@@ -42,7 +42,7 @@
 
 /* O32 stack has to be 8-byte aligned. */
 static u64 o32_stk[4096];
-#define O32_STK	  &o32_stk[sizeof(o32_stk)]
+#define O32_STK	  (&o32_stk[ARRAY_SIZE(o32_stk)])
 
 #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \
 				     __asm__(#fun " = call_o32")
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 28/62 NFSv4: Fix leak of clp->cl_acceptor string

In reply to Greg Kroah-Hartman

From: Chuck Lever <[email protected]>

[ Upstream commit 1047ec868332034d1fbcb2fae19fe6d4cb869ff2 ]

Our client can issue multiple SETCLIENTID operations to the same server in some circumstances. Ensure that calls to nfs4_proc_setclientid() after the first one do not overwrite the previously allocated cl_acceptor string.

unreferenced object 0xffff888461031800 (size 32):
comm "mount.nfs", pid 2227, jiffies 4294822467 (age 1407.749s) hex dump (first 32 bytes):

    6e 66 73 40 6b 6c 69 6d 74 2e 69 62 2e 31 30 31  [email protected]
    35 67 72 61 6e 67 65 72 2e 6e 65 74 00 00 00 00  5granger.net....
  backtrace:
    [<00000000ab820188>] __kmalloc+0x128/0x176
    [<00000000eeaf4ec8>] gss_stringify_acceptor+0xbd/0x1a7 [auth_rpcgss]
    [<00000000e85e3382>] nfs4_proc_setclientid+0x34e/0x46c [nfsv4]
    [<000000003d9cf1fa>] nfs40_discover_server_trunking+0x7a/0xed [nfsv4]
    [<00000000b81c3787>] nfs4_discover_server_trunking+0x81/0x244 [nfsv4]
    [<000000000801b55f>] nfs4_init_client+0x1b0/0x238 [nfsv4]
    [<00000000977daf7f>] nfs4_set_client+0xfe/0x14d [nfsv4]
    [<0000000053a68a2a>] nfs4_create_server+0x107/0x1db [nfsv4]
    [<0000000088262019>] nfs4_remote_mount+0x2c/0x59 [nfsv4]
    [<00000000e84a2fd0>] legacy_get_tree+0x2d/0x4c
    [<00000000797e947c>] vfs_get_tree+0x20/0xc7
    [<00000000ecabaaa8>] fc_mount+0xe/0x36
    [<00000000f15fafc2>] vfs_kern_mount+0x74/0x8d
    [<00000000a3ff4e26>] nfs_do_root_mount+0x8a/0xa3 [nfsv4]
    [<00000000d1c2b337>] nfs4_try_mount+0x58/0xad [nfsv4]
    [<000000004c9bddee>] nfs_fs_mount+0x820/0x869 [nfs]
Fixes f11b2a1cfbf5 ("nfs4: copy acceptor name from context ... ")
---
 fs/nfs/nfs4proc.c | 1 +
 1 file changed, 1 insertion(+)
fs/nfs/nfs4proc.c +1 -0
index ea29c608be893..8354dfae7038e 100644
@@ -5544,6 +5544,7 @@ int nfs4_proc_setclientid(struct nfs_client *clp, u32 program,
 	}
 	status = task->tk_status;
 	if (setclientid.sc_cred) {
+		kfree(clp->cl_acceptor);
 		clp->cl_acceptor = rpcauth_stringify_acceptor(setclientid.sc_cred);
 		put_rpccred(setclientid.sc_cred);
 	}
Signature · 1 line
2.20.1
author maintainer
#29 lore raw

PATCH 29/62 s390/uaccess: avoid (false positive) compiler warnings

In reply to Greg Kroah-Hartman

From: Christian Borntraeger <[email protected]>

[ Upstream commit 062795fcdcb2d22822fb42644b1d76a8ad8439b3 ]

Depending on inlining decisions by the compiler, __get/put_user_fn might become out of line. Then the compiler is no longer able to tell that size can only be 1,2,4 or 8 due to the check in __get/put_user resulting in false positives like

./arch/s390/include/asm/uaccess.h: In function ‘__put_user_fn’:
./arch/s390/include/asm/uaccess.h:113:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
113 | return rc;
| ^~
./arch/s390/include/asm/uaccess.h: In function ‘__get_user_fn’:
./arch/s390/include/asm/uaccess.h:143:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
143 | return rc;
| ^~

These functions are supposed to be always inlined. Mark it as such.

---
 arch/s390/include/asm/uaccess.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/s390/include/asm/uaccess.h +2 -2
index a7ef702201260..31b2913372b56 100644
@@ -151,7 +151,7 @@ unsigned long __must_check __copy_to_user(void __user *to, const void *from,
 	__rc;							\
 })
 
-static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
+static __always_inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
 {
 	unsigned long spec = 0x810000UL;
 	int rc;
@@ -181,7 +181,7 @@ static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
 	return rc;
 }
 
-static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size)
+static __always_inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size)
 {
 	unsigned long spec = 0x81UL;
 	int rc;
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 30/62 tracing: Initialize iter->seq after zeroing in tracing_read_pipe()

In reply to Greg Kroah-Hartman

From: Petr Mladek <[email protected]>

[ Upstream commit d303de1fcf344ff7c15ed64c3f48a991c9958775 ]

A customer reported the following softlockup:

[899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464]
[899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4
[899688.160002] RIP: 0010:up_write+0x1a/0x30
[899688.160002] Kernel panic - not syncing: softlockup: hung tasks
[899688.160002] RIP: 0010:up_write+0x1a/0x30
[899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12
[899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000
[899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00
[899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000
[899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8
[899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000
[899688.160002]  tracing_read_pipe+0x336/0x3c0
[899688.160002]  __vfs_read+0x26/0x140
[899688.160002]  vfs_read+0x87/0x130
[899688.160002]  SyS_read+0x42/0x90
[899688.160002]  do_syscall_64+0x74/0x160

It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label.

Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress.

The culprit seems to be in the code:

	/* reset all but tr, trace, and overruns */
	memset(&iter->seq, 0,
	       sizeof(struct trace_iterator) -
	       offsetof(struct trace_iterator, seq));

It was added by the commit 53d0aa773053ab182877 ("ftrace:
add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like:

     struct trace_seq {
	unsigned char		buffer[PAGE_SIZE];
	unsigned int		len;
     };

There was no "size" variable and zeroing was perfectly fine.

The solution is to reinitialize the structure after or without zeroing.

---
 kernel/trace/trace.c | 1 +
 1 file changed, 1 insertion(+)
kernel/trace/trace.c +1 -0
index 827ba2caea097..6a170a78b4535 100644
@@ -5217,6 +5217,7 @@ waitagain:
 	       sizeof(struct trace_iterator) -
 	       offsetof(struct trace_iterator, seq));
 	cpumask_clear(iter->started);
+	trace_seq_init(&iter->seq);
 	iter->pos = -1;
 
 	trace_event_read_lock();
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 31/62 USB: legousbtower: fix a signedness bug in tower_probe()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit fd47a417e75e2506eb3672ae569b1c87e3774155 ]

The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false.

---
 drivers/usb/misc/legousbtower.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/misc/legousbtower.c +1 -1
index f56307059d48c..7cac3ee09b09d 100644
@@ -898,7 +898,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 				  get_version_reply,
 				  sizeof(*get_version_reply),
 				  1000);
-	if (result < sizeof(*get_version_reply)) {
+	if (result != sizeof(*get_version_reply)) {
 		if (result >= 0)
 			result = -EIO;
 		dev_err(idev, "get version request failed: %d\n", result);
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 32/62 thunderbolt: Use 32-bit writes when writing ring producer/consumer

In reply to Greg Kroah-Hartman

From: Mika Westerberg <[email protected]>

[ Upstream commit 943795219d3cb9f8ce6ce51cad3ffe1f61e95c6b ]

The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address.

---
 drivers/thunderbolt/nhi.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
drivers/thunderbolt/nhi.c +18 -4
index cba6bc6ab9ed7..c963593eedbe7 100644
@@ -95,9 +95,20 @@ static void __iomem *ring_options_base(struct tb_ring *ring)
 	return io;
 }
 
-static void ring_iowrite16desc(struct tb_ring *ring, u32 value, u32 offset)
+static void ring_iowrite_cons(struct tb_ring *ring, u16 cons)
 {
-	iowrite16(value, ring_desc_base(ring) + offset);
+	/*
+	 * The other 16-bits in the register is read-only and writes to it
+	 * are ignored by the hardware so we can save one ioread32() by
+	 * filling the read-only bits with zeroes.
+	 */
+	iowrite32(cons, ring_desc_base(ring) + 8);
+}
+
+static void ring_iowrite_prod(struct tb_ring *ring, u16 prod)
+{
+	/* See ring_iowrite_cons() above for explanation */
+	iowrite32(prod << 16, ring_desc_base(ring) + 8);
 }
 
 static void ring_iowrite32desc(struct tb_ring *ring, u32 value, u32 offset)
@@ -149,7 +160,10 @@ static void ring_write_descriptors(struct tb_ring *ring)
 			descriptor->sof = frame->sof;
 		}
 		ring->head = (ring->head + 1) % ring->size;
-		ring_iowrite16desc(ring, ring->head, ring->is_tx ? 10 : 8);
+		if (ring->is_tx)
+			ring_iowrite_prod(ring, ring->head);
+		else
+			ring_iowrite_cons(ring, ring->head);
 	}
 }
 
@@ -369,7 +383,7 @@ void ring_stop(struct tb_ring *ring)
 
 	ring_iowrite32options(ring, 0, 0);
 	ring_iowrite64desc(ring, 0, 0);
-	ring_iowrite16desc(ring, 0, ring->is_tx ? 10 : 8);
+	ring_iowrite32desc(ring, 0, 8);
 	ring_iowrite32desc(ring, 0, 12);
 	ring->head = 0;
 	ring->tail = 0;
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 33/62 ath6kl: fix a NULL-ptr-deref bug in ath6kl_usb_alloc_urb_from_pipe()

In reply to Greg Kroah-Hartman

From: Hui Peng <[email protected]>

[ Upstream commit 39d170b3cb62ba98567f5c4f40c27b5864b304e5 ]

The ar_usb field of ath6kl_usb_pipe_usb_pipe objects are initialized to point to the containing ath6kl_usb object according to endpoint descriptors read from the device side, as shown below in ath6kl_usb_setup_pipe_resources:

for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
	endpoint = &iface_desc->endpoint[i].desc;

	// get the address from endpoint descriptor
	pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb,
						endpoint->bEndpointAddress,
						&urbcount);
	......
	// select the pipe object
	pipe = &ar_usb->pipes[pipe_num];

	// initialize the ar_usb field
	pipe->ar_usb = ar_usb;
}

The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref ath6kl_usb_alloc_urb_from_pipe and ath6kl_usb_free_urb_to_pipe.

This patch fixes the bug by preventing potential NULL-ptr-deref (CVE-2019-15098).

---
 drivers/net/wireless/ath/ath6kl/usb.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/net/wireless/ath/ath6kl/usb.c +8 -0
index 9da3594fd010d..fc22c5f479276 100644
@@ -132,6 +132,10 @@ ath6kl_usb_alloc_urb_from_pipe(struct ath6kl_usb_pipe *pipe)
 	struct ath6kl_urb_context *urb_context = NULL;
 	unsigned long flags;
 
+	/* bail if this pipe is not initialized */
+	if (!pipe->ar_usb)
+		return NULL;
+
 	spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
 	if (!list_empty(&pipe->urb_list_head)) {
 		urb_context =
@@ -150,6 +154,10 @@ static void ath6kl_usb_free_urb_to_pipe(struct ath6kl_usb_pipe *pipe,
 {
 	unsigned long flags;
 
+	/* bail if this pipe is not initialized */
+	if (!pipe->ar_usb)
+		return;
+
 	spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
 	pipe->urb_cnt++;
 
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 34/62 fuse: flush dirty data/metadata before non-truncate setattr

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

commit b24e7598db62386a95a3c8b9c75630c5d56fe077 upstream.

If writeback cache is enabled, then writes might get reordered with chmod/chown/utimes. The problem with this is that performing the write in the fuse daemon might itself change some of these attributes. In such case the following sequence of operations will result in file ending up with the wrong mode, for example:

  int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL);
  write (fd, "1", 1);
  fchown (fd, 0, 0);
  fchmod (fd, 04755);
  close (fd);

This patch fixes this by flushing pending writes before performing chown/chmod/utimes.

Fixes 4d99ff8f12eb ("fuse: Turn writeback cache on")
Cc <[email protected]> # v3.15+
---
 fs/fuse/dir.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
fs/fuse/dir.c +13 -0
@@ -1654,6 +1654,19 @@ int fuse_do_setattr(struct dentry *dentr
 	if (attr->ia_valid & ATTR_SIZE)
 		is_truncate = true;
 
+	/* Flush dirty data/metadata before non-truncate SETATTR */
+	if (is_wb && S_ISREG(inode->i_mode) &&
+	    attr->ia_valid &
+			(ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_MTIME_SET |
+			 ATTR_TIMES_SET)) {
+		err = write_inode_now(inode, true);
+		if (err)
+			return err;
+
+		fuse_set_nowrite(inode);
+		fuse_release_nowrite(inode);
+	}
+
 	if (is_truncate) {
 		fuse_set_nowrite(inode);
 		set_bit(FUSE_I_SIZE_UNSTABLE, &fi->state);
author maintainer
#35 lore raw

PATCH 35/62 fuse: truncate pending writes on O_TRUNC

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

commit e4648309b85a78f8c787457832269a8712a8673e upstream.

Make sure cached writes are not reordered around open(..., O_TRUNC), with the obvious wrong results.

Fixes 4d99ff8f12eb ("fuse: Turn writeback cache on")
Cc <[email protected]> # v3.15+
---
 fs/fuse/file.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
fs/fuse/file.c +7 -3
@@ -201,7 +201,7 @@ int fuse_open_common(struct inode *inode
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	int err;
-	bool lock_inode = (file->f_flags & O_TRUNC) &&
+	bool is_wb_truncate = (file->f_flags & O_TRUNC) &&
 			  fc->atomic_o_trunc &&
 			  fc->writeback_cache;
 
@@ -209,16 +209,20 @@ int fuse_open_common(struct inode *inode
 	if (err)
 		return err;
 
-	if (lock_inode)
+	if (is_wb_truncate) {
 		inode_lock(inode);
+		fuse_set_nowrite(inode);
+	}
 
 	err = fuse_do_open(fc, get_node_id(inode), file, isdir);
 
 	if (!err)
 		fuse_finish_open(inode, file);
 
-	if (lock_inode)
+	if (is_wb_truncate) {
+		fuse_release_nowrite(inode);
 		inode_unlock(inode);
+	}
 
 	return err;
 }
author maintainer
#36 lore raw

PATCH 36/62 ALSA: bebob: Fix prototype of helper function to return negative value

In reply to Greg Kroah-Hartman

From: Takashi Sakamoto <[email protected]>

commit f2bbdbcb075f3977a53da3bdcb7cd460bc8ae5f2 upstream.

A helper function of ALSA bebob driver returns negative value in a function which has a prototype to return unsigned value.

This commit fixes it by changing the prototype.

Fixes eb7b3a056cd8 ("ALSA: bebob: Add commands and connections/streams management")
Cc <[email protected]> # v3.16+
---
 sound/firewire/bebob/bebob_stream.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
sound/firewire/bebob/bebob_stream.c +1 -2
@@ -253,8 +253,7 @@ end:
 	return err;
 }
 
-static unsigned int
-map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s)
+static int map_data_channels(struct snd_bebob *bebob, struct amdtp_stream *s)
 {
 	unsigned int sec, sections, ch, channels;
 	unsigned int pcm, midi, location;
author maintainer
#37 lore raw

PATCH 37/62 UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 1186f86a71130a7635a20843e355bb880c7349b2 upstream.

Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices.

However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is:

	ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
	total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But:

High-speed or slower connections never use a bulk maxpacket value larger than 512;

The SCSI layer does not handle block devices with a block size smaller than 512 bytes;

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42090f.

CC Oliver Neukum <[email protected]>
Fixes 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")
---
 drivers/usb/storage/uas.c |   20 --------------------
 1 file changed, 20 deletions(-)
drivers/usb/storage/uas.c +0 -20
@@ -796,30 +796,10 @@ static int uas_slave_alloc(struct scsi_d
 {
 	struct uas_dev_info *devinfo =
 		(struct uas_dev_info *)sdev->host->hostdata;
-	int maxp;
 
 	sdev->hostdata = devinfo;
 
 	/*
-	 * We have two requirements here. We must satisfy the requirements
-	 * of the physical HC and the demands of the protocol, as we
-	 * definitely want no additional memory allocation in this path
-	 * ruling out using bounce buffers.
-	 *
-	 * For a transmission on USB to continue we must never send
-	 * a package that is smaller than maxpacket. Hence the length of each
-         * scatterlist element except the last must be divisible by the
-         * Bulk maxpacket value.
-	 * If the HC does not ensure that through SG,
-	 * the upper layer must do that. We must assume nothing
-	 * about the capabilities off the HC, so we use the most
-	 * pessimistic requirement.
-	 */
-
-	maxp = usb_maxpacket(devinfo->udev, devinfo->data_in_pipe, 0);
-	blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
-	/*
 	 * The protocol has no requirements on alignment in the strict sense.
 	 * Controllers may or may not have alignment restrictions.
 	 * As this is not exported, we use an extremely conservative guess.
#38 lore raw

Re: [PATCH 4.9 37/62] UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

Am Montag, den 04.11.2019, 22:44 +0100 schrieb Greg Kroah-Hartman:

Quoted 6 lines

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Not in 4.9.x. AFAICT the same story as 4.4.x
The patch is not strictly needed, but breaks UAS over usbip.

Regards
Oliver

maintainer
#39 lore raw

Re: [PATCH 4.9 37/62] UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

Quoted 10 lines · Oliver Neukum

Am Montag, den 04.11.2019, 22:44 +0100 schrieb Greg Kroah-Hartman:

Quoted 6 lines

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Not in 4.9.x. AFAICT the same story as 4.4.x
The patch is not strictly needed, but breaks UAS over usbip.

It's in 4.9 since April this year... Same story for 4.4.

Signature · 2 lines
Thanks,
Sasha
#40 lore raw

Re: [PATCH 4.9 37/62] UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

Am Dienstag, den 05.11.2019, 19:11 -0500 schrieb Sasha Levin:

Quoted 5 lines · Oliver Neukum
Quoted 4 lines

Am Montag, den 04.11.2019, 22:44 +0100 schrieb Greg Kroah-Hartman:

Quoted 3 lines

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Not in 4.9.x. AFAICT the same story as 4.4.x
The patch is not strictly needed, but breaks UAS over usbip.

It's in 4.9 since April this year... Same story for 4.4.

Hi,

now I am confused. Neither looking at the logs nor the source I can see the commit. Top commit is 9e48f0c28dd505e39bd136ec92a042b311b127c6
of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git

I am sorry for being obnoxious here and it is entirely possible that I am stupid, but this is a discrepancy that needs to be resolved.

Regards
Oliver

author maintainer
#41 lore raw

Re: [PATCH 4.9 37/62] UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

Quoted 17 lines · Oliver Neukum

Am Dienstag, den 05.11.2019, 19:11 -0500 schrieb Sasha Levin:

Quoted 5 lines · Oliver Neukum
Quoted 4 lines

Am Montag, den 04.11.2019, 22:44 +0100 schrieb Greg Kroah-Hartman:

Quoted 3 lines

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Not in 4.9.x. AFAICT the same story as 4.4.x
The patch is not strictly needed, but breaks UAS over usbip.

It's in 4.9 since April this year... Same story for 4.4.

Hi,

Quoted 7 lines

now I am confused. Neither looking at the logs nor the source I can see the commit. Top commit is 9e48f0c28dd505e39bd136ec92a042b311b127c6
of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git

I am sorry for being obnoxious here and it is entirely possible that I am stupid, but this is a discrepancy that needs to be resolved.

Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") is the patch that is being reverted here, and it is in the following kernel releases:

	4.4.180 4.9.175 4.14.118 4.19.42 5.0.15 5.1.1 5.2

And it is causing known issues, so we should revert it.

Now if usbip breaks with this revert, we should add the newer patch that keeps it working properly, is that what you are thinking that ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") is?

thanks,

greg k-h

author maintainer
#42 lore raw

PATCH 38/62 USB: gadget: Reject endpoints with 0 maxpacket value

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 54f83b8c8ea9b22082a496deadf90447a326954e upstream.

Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that a UDC will crash or hang when trying to handle a non-zero-length usb_request for such an endpoint. Indeed, dummy-hcd gets a divide error when trying to calculate the remainder of a transfer length by the maxpacket value, as discovered by the syzbot fuzzer.

Currently the gadget core does not check for endpoints having a maxpacket value of 0. This patch adds a check to usb_ep_enable(), preventing such endpoints from being used.

As far as I know, none of the gadget drivers in the kernel tries to create an endpoint with maxpacket = 0, but until now there has been nothing to prevent userspace programs under gadgetfs or configfs from doing it.

---
 drivers/usb/gadget/udc/core.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/usb/gadget/udc/core.c +11 -0
@@ -106,6 +106,17 @@ int usb_ep_enable(struct usb_ep *ep)
 	if (ep->enabled)
 		goto out;
 
+	/* UDC drivers can't handle endpoints with maxpacket size 0 */
+	if (usb_endpoint_maxp(ep->desc) == 0) {
+		/*
+		 * We should log an error message here, but we can't call
+		 * dev_err() because there's no way to find the gadget
+		 * given only ep.
+		 */
+		ret = -EINVAL;
+		goto out;
+	}
+
 	ret = ep->ops->enable(ep, ep->desc);
 	if (ret)
 		goto out;
author maintainer
#43 lore raw

PATCH 39/62 usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 9a976949613132977098fc49510b46fa8678d864 upstream.

Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices.

However, it now turns out that this interacts badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is:

	ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
	total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting for usb-storage. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But:

High-speed or slower connections never use a bulk maxpacket value larger than 512;

The SCSI layer does not handle block devices with a block size smaller than 512 bytes;

All the host controllers capable of SuperSpeed operation can handle fully general SG;

Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG.

Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to fix the swiotlb problem, this patch reverts commit 747668dbc061.

---
 drivers/usb/storage/scsiglue.c |   10 ----------
 1 file changed, 10 deletions(-)
drivers/usb/storage/scsiglue.c +0 -10
@@ -81,7 +81,6 @@ static const char* host_info(struct Scsi
 static int slave_alloc (struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
-	int maxp;
 
 	/*
 	 * Set the INQUIRY transfer length to 36.  We don't use any of
@@ -91,15 +90,6 @@ static int slave_alloc (struct scsi_devi
 	sdev->inquiry_len = 36;
 
 	/*
-	 * USB has unusual scatter-gather requirements: the length of each
-	 * scatterlist element except the last must be divisible by the
-	 * Bulk maxpacket value.  Fortunately this value is always a
-	 * power of 2.  Inform the block layer about this requirement.
-	 */
-	maxp = usb_maxpacket(us->pusb_dev, us->recv_bulk_pipe, 0);
-	blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
-	/*
 	 * Some host controllers may have alignment requirements.
 	 * We'll play it safe by requiring 512-byte alignment always.
 	 */
author maintainer
#44 lore raw

PATCH 40/62 USB: ldusb: fix ring-buffer locking

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit d98ee2a19c3334e9343df3ce254b496f1fc428eb upstream.

The custom ring-buffer implementation was merged without any locking or explicit memory barriers, but a spinlock was later added by commit 9d33efd9a791 ("USB: ldusb bugfix").

The lock did not cover the update of the tail index once the entry had been processed, something which could lead to memory corruption on weakly ordered architectures or due to compiler optimisations.

Specifically, a completion handler running on another CPU might observe the incremented tail index and update the entry before ld_usb_read() is done with it.

Fixes 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Fixes 9d33efd9a791 ("USB: ldusb bugfix")
Cc stable <[email protected]> # 2.6.13
---
 drivers/usb/misc/ldusb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/misc/ldusb.c +2 -2
@@ -499,11 +499,11 @@ static ssize_t ld_usb_read(struct file *
 		retval = -EFAULT;
 		goto unlock_exit;
 	}
-	dev->ring_tail = (dev->ring_tail+1) % ring_buffer_size;
-
 	retval = bytes_to_read;
 
 	spin_lock_irq(&dev->rbsl);
+	dev->ring_tail = (dev->ring_tail + 1) % ring_buffer_size;
+
 	if (dev->buffer_overflow) {
 		dev->buffer_overflow = 0;
 		spin_unlock_irq(&dev->rbsl);
author maintainer
#45 lore raw

PATCH 41/62 USB: ldusb: fix control-message timeout

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 52403cfbc635d28195167618690595013776ebde upstream.

USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive.

Fixes 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc stable <[email protected]> # 2.6.13
Reported-by [email protected]
---
 drivers/usb/misc/ldusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/misc/ldusb.c +1 -1
@@ -584,7 +584,7 @@ static ssize_t ld_usb_write(struct file
 					 1 << 8, 0,
 					 dev->interrupt_out_buffer,
 					 bytes_to_write,
-					 USB_CTRL_SET_TIMEOUT * HZ);
+					 USB_CTRL_SET_TIMEOUT);
 		if (retval < 0)
 			dev_err(&dev->intf->dev,
 				"Couldn't submit HID_REQ_SET_REPORT %d\n",
author maintainer
#46 lore raw

PATCH 42/62 USB: serial: whiteheat: fix potential slab corruption

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 1251dab9e0a2c4d0d2d48370ba5baa095a5e8774 upstream.

Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests.

---
 drivers/usb/serial/whiteheat.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/serial/whiteheat.c +4 -0
@@ -604,6 +604,10 @@ static int firm_send_command(struct usb_
 
 	command_port = port->serial->port[COMMAND_PORT];
 	command_info = usb_get_serial_port_data(command_port);
+
+	if (command_port->bulk_out_size < datasize + 1)
+		return -EIO;
+
 	mutex_lock(&command_info->mutex);
 	command_info->command_finished = false;
 
author maintainer
#47 lore raw

PATCH 43/62 USB: serial: whiteheat: fix line-speed endianness

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 84968291d7924261c6a0624b9a72f952398e258b upstream.

Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines.

Also use an unsigned format specifier in the corresponding debug message.

---
 drivers/usb/serial/whiteheat.c |    9 ++++++---
 drivers/usb/serial/whiteheat.h |    2 +-
 2 files changed, 7 insertions(+), 4 deletions(-)
drivers/usb/serial/whiteheat.c +6 -3
@@ -681,6 +681,7 @@ static void firm_setup_port(struct tty_s
 	struct device *dev = &port->dev;
 	struct whiteheat_port_settings port_settings;
 	unsigned int cflag = tty->termios.c_cflag;
+	speed_t baud;
 
 	port_settings.port = port->port_number + 1;
 
@@ -741,11 +742,13 @@ static void firm_setup_port(struct tty_s
 	dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
 
 	/* get the baud rate wanted */
-	port_settings.baud = tty_get_baud_rate(tty);
-	dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud);
+	baud = tty_get_baud_rate(tty);
+	port_settings.baud = cpu_to_le32(baud);
+	dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
 
 	/* fixme: should set validated settings */
-	tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
+	tty_encode_baud_rate(tty, baud, baud);
+
 	/* handle any settings that aren't specified in the tty structure */
 	port_settings.lloop = 0;
 
drivers/usb/serial/whiteheat.h +1 -1
@@ -91,7 +91,7 @@ struct whiteheat_simple {
 
 struct whiteheat_port_settings {
 	__u8	port;		/* port number (1 to N) */
-	__u32	baud;		/* any value 7 - 460800, firmware calculates
+	__le32	baud;		/* any value 7 - 460800, firmware calculates
 				   best fit; arrives little endian */
 	__u8	bits;		/* 5, 6, 7, or 8 */
 	__u8	stop;		/* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
author maintainer
#48 lore raw

PATCH 44/62 HID: i2c-hid: add Trekstor Primebook C11B to descriptor override

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit 09f3dbe474735df13dd8a66d3d1231048d9b373f upstream.

The Primebook C11B uses the SIPODEV SP1064 touchpad. There are 2 versions of this 2-in-1 and the touchpad in the older version does not supply descriptors, so it has to be added to the override list.

---
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +19 -0
@@ -323,6 +323,25 @@ static const struct dmi_system_id i2c_hi
 		.driver_data = (void *)&sipodev_desc
 	},
 	{
+		/*
+		 * There are at least 2 Primebook C11B versions, the older
+		 * version has a product-name of "Primebook C11B", and a
+		 * bios version / release / firmware revision of:
+		 * V2.1.2 / 05/03/2018 / 18.2
+		 * The new version has "PRIMEBOOK C11B" as product-name and a
+		 * bios version / release / firmware revision of:
+		 * CFALKSW05_BIOS_V1.1.2 / 11/19/2018 / 19.2
+		 * Only the older version needs this quirk, note the newer
+		 * version will not match as it has a different product-name.
+		 */
+		.ident = "Trekstor Primebook C11B",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C11B"),
+		},
+		.driver_data = (void *)&sipodev_desc
+	},
+	{
 		.ident = "Direkt-Tek DTLAPY116-2",
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
author maintainer
#49 lore raw

PATCH 45/62 HID: Fix assumption that devices have inputs

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit d9d4b1e46d9543a82c23f6df03f4ad697dab361b upstream.

The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff driver. The problem is caused by the driver's assumption that the device must have an input report. While this will be true for all normal HID input devices, a suitably malicious device can violate the assumption.

The same assumption is present in over a dozen other HID drivers. This patch fixes them by checking that the list of hid_inputs for the hid_device is nonempty before allowing it to be used.

---
 drivers/hid/hid-axff.c           |   11 +++++++++--
 drivers/hid/hid-dr.c             |   12 +++++++++---
 drivers/hid/hid-emsff.c          |   12 +++++++++---
 drivers/hid/hid-gaff.c           |   12 +++++++++---
 drivers/hid/hid-holtekff.c       |   12 +++++++++---
 drivers/hid/hid-lg2ff.c          |   12 +++++++++---
 drivers/hid/hid-lg3ff.c          |   11 +++++++++--
 drivers/hid/hid-lg4ff.c          |   11 +++++++++--
 drivers/hid/hid-lgff.c           |   11 +++++++++--
 drivers/hid/hid-logitech-hidpp.c |   11 +++++++++--
 drivers/hid/hid-sony.c           |   12 +++++++++---
 drivers/hid/hid-tmff.c           |   12 +++++++++---
 drivers/hid/hid-zpff.c           |   12 +++++++++---
 13 files changed, 117 insertions(+), 34 deletions(-)
drivers/hid/hid-axff.c +9 -2
@@ -75,13 +75,20 @@ static int axff_init(struct hid_device *
 {
 	struct axff_device *axff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+	struct hid_input *hidinput;
 	struct list_head *report_list =&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
+	struct input_dev *dev;
 	int field_count = 0;
 	int i, j;
 	int error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (list_empty(report_list)) {
 		hid_err(hid, "no output reports found\n");
 		return -ENODEV;
drivers/hid/hid-dr.c +9 -3
@@ -87,13 +87,19 @@ static int drff_init(struct hid_device *
 {
 	struct drff_device *drff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_first_entry(&hid->inputs,
-						struct hid_input, list);
+	struct hid_input *hidinput;
 	struct list_head *report_list =
 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
+	struct input_dev *dev;
 	int error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (list_empty(report_list)) {
 		hid_err(hid, "no output reports found\n");
 		return -ENODEV;
drivers/hid/hid-emsff.c +9 -3
@@ -59,13 +59,19 @@ static int emsff_init(struct hid_device
 {
 	struct emsff_device *emsff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_first_entry(&hid->inputs,
-						struct hid_input, list);
+	struct hid_input *hidinput;
 	struct list_head *report_list =
 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
+	struct input_dev *dev;
 	int error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (list_empty(report_list)) {
 		hid_err(hid, "no output reports found\n");
 		return -ENODEV;
drivers/hid/hid-gaff.c +9 -3
@@ -77,14 +77,20 @@ static int gaff_init(struct hid_device *
 {
 	struct gaff_device *gaff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-						struct hid_input, list);
+	struct hid_input *hidinput;
 	struct list_head *report_list =
 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct list_head *report_ptr = report_list;
-	struct input_dev *dev = hidinput->input;
+	struct input_dev *dev;
 	int error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (list_empty(report_list)) {
 		hid_err(hid, "no output reports found\n");
 		return -ENODEV;
drivers/hid/hid-holtekff.c +9 -3
@@ -140,13 +140,19 @@ static int holtekff_init(struct hid_devi
 {
 	struct holtekff_device *holtekff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-						struct hid_input, list);
+	struct hid_input *hidinput;
 	struct list_head *report_list =
 			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
+	struct input_dev *dev;
 	int error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (list_empty(report_list)) {
 		hid_err(hid, "no output report found\n");
 		return -ENODEV;
drivers/hid/hid-lg2ff.c +9 -3
@@ -62,11 +62,17 @@ int lg2ff_init(struct hid_device *hid)
 {
 	struct lg2ff_device *lg2ff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-						struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *dev;
 	int error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	/* Check that the report looks ok */
 	report = hid_validate_values(hid, HID_OUTPUT_REPORT, 0, 0, 7);
 	if (!report)
drivers/hid/hid-lg3ff.c +9 -2
@@ -129,12 +129,19 @@ static const signed short ff3_joystick_a
 
 int lg3ff_init(struct hid_device *hid)
 {
-	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *dev;
 	const signed short *ff_bits = ff3_joystick_ac;
 	int error;
 	int i;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	/* Check that the report looks ok */
 	if (!hid_validate_values(hid, HID_OUTPUT_REPORT, 0, 0, 35))
 		return -ENODEV;
drivers/hid/hid-lg4ff.c +9 -2
@@ -1261,8 +1261,8 @@ static int lg4ff_handle_multimode_wheel(
 
 int lg4ff_init(struct hid_device *hid)
 {
-	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *dev;
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
 	const struct usb_device_descriptor *udesc = &(hid_to_usb_dev(hid)->descriptor);
@@ -1274,6 +1274,13 @@ int lg4ff_init(struct hid_device *hid)
 	int mmode_ret, mmode_idx = -1;
 	u16 real_product_id;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	/* Check that the report looks ok */
 	if (!hid_validate_values(hid, HID_OUTPUT_REPORT, 0, 0, 7))
 		return -1;
drivers/hid/hid-lgff.c +9 -2
@@ -127,12 +127,19 @@ static void hid_lgff_set_autocenter(stru
 
 int lgff_init(struct hid_device* hid)
 {
-	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *dev;
 	const signed short *ff_bits = ff_joystick;
 	int error;
 	int i;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	/* Check that the report looks ok */
 	if (!hid_validate_values(hid, HID_OUTPUT_REPORT, 0, 0, 7))
 		return -ENODEV;
drivers/hid/hid-logitech-hidpp.c +9 -2
@@ -1238,8 +1238,8 @@ static void hidpp_ff_destroy(struct ff_d
 static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
 {
 	struct hid_device *hid = hidpp->hid_dev;
-	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *dev;
 	const struct usb_device_descriptor *udesc = &(hid_to_usb_dev(hid)->descriptor);
 	const u16 bcdDevice = le16_to_cpu(udesc->bcdDevice);
 	struct ff_device *ff;
@@ -1248,6 +1248,13 @@ static int hidpp_ff_init(struct hidpp_de
 	int error, j, num_slots;
 	u8 version;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	if (!dev) {
 		hid_err(hid, "Struct input_dev not set!\n");
 		return -EINVAL;
drivers/hid/hid-sony.c +9 -3
@@ -2008,9 +2008,15 @@ static int sony_play_effect(struct input
 
 static int sony_init_ff(struct sony_sc *sc)
 {
-	struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
-						struct hid_input, list);
-	struct input_dev *input_dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *input_dev;
+
+	if (list_empty(&sc->hdev->inputs)) {
+		hid_err(sc->hdev, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(sc->hdev->inputs.next, struct hid_input, list);
+	input_dev = hidinput->input;
 
 	input_set_capability(input_dev, EV_FF, FF_RUMBLE);
 	return input_ff_create_memless(input_dev, NULL, sony_play_effect);
drivers/hid/hid-tmff.c +9 -3
@@ -136,12 +136,18 @@ static int tmff_init(struct hid_device *
 	struct tmff_device *tmff;
 	struct hid_report *report;
 	struct list_head *report_list;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-							struct hid_input, list);
-	struct input_dev *input_dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *input_dev;
 	int error;
 	int i;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	input_dev = hidinput->input;
+
 	tmff = kzalloc(sizeof(struct tmff_device), GFP_KERNEL);
 	if (!tmff)
 		return -ENOMEM;
drivers/hid/hid-zpff.c +9 -3
@@ -66,11 +66,17 @@ static int zpff_init(struct hid_device *
 {
 	struct zpff_device *zpff;
 	struct hid_report *report;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-						struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
+	struct hid_input *hidinput;
+	struct input_dev *dev;
 	int i, error;
 
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
 	for (i = 0; i < 4; i++) {
 		report = hid_validate_values(hid, HID_OUTPUT_REPORT, 0, i, 1);
 		if (!report)
author maintainer
#50 lore raw

PATCH 46/62 HID: fix error message in hid_open_report()

In reply to Greg Kroah-Hartman

From: Michał Mirosław <[email protected]>

commit b3a81c777dcb093020680490ab970d85e2f6f04f upstream.

On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference.

This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR.

Fixes 8c3d52fc393b ("HID: make parser more verbose about parsing errors by default")
---
 drivers/hid/hid-core.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +5 -2
@@ -959,6 +959,7 @@ int hid_open_report(struct hid_device *d
 	__u8 *start;
 	__u8 *buf;
 	__u8 *end;
+	__u8 *next;
 	int ret;
 	static int (*dispatch_type[])(struct hid_parser *parser,
 				      struct hid_item *item) = {
@@ -1012,7 +1013,8 @@ int hid_open_report(struct hid_device *d
 	device->collection_size = HID_DEFAULT_NUM_COLLECTIONS;
 
 	ret = -EINVAL;
-	while ((start = fetch_item(start, end, &item)) != NULL) {
+	while ((next = fetch_item(start, end, &item)) != NULL) {
+		start = next;
 
 		if (item.format != HID_ITEM_FORMAT_SHORT) {
 			hid_err(device, "unexpected long global item\n");
@@ -1041,7 +1043,8 @@ int hid_open_report(struct hid_device *d
 		}
 	}
 
-	hid_err(device, "item fetching failed at offset %d\n", (int)(end - start));
+	hid_err(device, "item fetching failed at offset %u/%u\n",
+		size - (unsigned int)(end - start), size);
 err:
 	vfree(parser);
 	hid_close_report(device);
author maintainer
#51 lore raw

PATCH 47/62 nl80211: fix validation of mesh path nexthop

In reply to Greg Kroah-Hartman

From: Markus Theil <[email protected]>

commit 1fab1b89e2e8f01204a9c05a39fd0b6411a48593 upstream.

Mesh path nexthop should be a ethernet address, but current validation checks against 4 byte integers.

Fixes 2ec600d672e74 ("nl80211/cfg80211: support for mesh, sta dumping")
---
 net/wireless/nl80211.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +2 -1
@@ -295,7 +295,8 @@ static const struct nla_policy nl80211_p
 	[NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ },
 	[NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY,
 				   .len = IEEE80211_MAX_MESH_ID_LEN },
-	[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
+	[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_BINARY,
+					  .len = ETH_ALEN },
 
 	[NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 },
 	[NL80211_ATTR_REG_RULES] = { .type = NLA_NESTED },
author maintainer
#52 lore raw

PATCH 48/62 s390/cmm: fix information leak in cmm_timeout_handler()

In reply to Greg Kroah-Hartman

From: Yihui ZENG <[email protected]>

commit b8e51a6a9db94bc1fb18ae831b3dab106b5a4b5f upstream.

The problem is that we were putting the NUL terminator too far:

	buf[sizeof(buf) - 1] = '\0';

If the user input isn't NUL terminated and they haven't initialized the whole buffer then it leads to an info leak. The NUL terminator should be:

	buf[len - 1] = '\0';
---
 arch/s390/mm/cmm.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/s390/mm/cmm.c +6 -6
@@ -306,16 +306,16 @@ static int cmm_timeout_handler(struct ct
 	}
 
 	if (write) {
-		len = *lenp;
-		if (copy_from_user(buf, buffer,
-				   len > sizeof(buf) ? sizeof(buf) : len))
+		len = min(*lenp, sizeof(buf));
+		if (copy_from_user(buf, buffer, len))
 			return -EFAULT;
-		buf[sizeof(buf) - 1] = '\0';
+		buf[len - 1] = '\0';
 		cmm_skip_blanks(buf, &p);
 		nr = simple_strtoul(p, &p, 0);
 		cmm_skip_blanks(p, &p);
 		seconds = simple_strtoul(p, &p, 0);
 		cmm_set_timeout(nr, seconds);
+		*ppos += *lenp;
 	} else {
 		len = sprintf(buf, "%ld %ld\n",
 			      cmm_timeout_pages, cmm_timeout_seconds);
@@ -323,9 +323,9 @@ static int cmm_timeout_handler(struct ct
 			len = *lenp;
 		if (copy_to_user(buffer, buf, len))
 			return -EFAULT;
+		*lenp = len;
+		*ppos += len;
 	}
-	*lenp = len;
-	*ppos += len;
 	return 0;
 }
 
author maintainer
#53 lore raw

PATCH 49/62 rtlwifi: Fix potential overflow on P2P code

In reply to Greg Kroah-Hartman

From: Laura Abbott <[email protected]>

commit 8c55dedb795be8ec0cf488f98c03a1c2176f7fb1 upstream.

Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM.

---
 drivers/net/wireless/realtek/rtlwifi/ps.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/wireless/realtek/rtlwifi/ps.c +6 -0
@@ -770,6 +770,9 @@ static void rtl_p2p_noa_ie(struct ieee80
 				return;
 			} else {
 				noa_num = (noa_len - 2) / 13;
+				if (noa_num > P2P_MAX_NOA_NUM)
+					noa_num = P2P_MAX_NOA_NUM;
+
 			}
 			noa_index = ie[3];
 			if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==
@@ -864,6 +867,9 @@ static void rtl_p2p_action_ie(struct iee
 				return;
 			} else {
 				noa_num = (noa_len - 2) / 13;
+				if (noa_num > P2P_MAX_NOA_NUM)
+					noa_num = P2P_MAX_NOA_NUM;
+
 			}
 			noa_index = ie[3];
 			if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==
author maintainer
#54 lore raw

PATCH 50/62 dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

commit bacdcb6675e170bb2e8d3824da220e10274f42a7 upstream.

Yegor Yefremov <[email protected]> reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub.

This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data.

Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake.

Fixes fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
---
 drivers/dma/cppi41.c |   21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)
drivers/dma/cppi41.c +20 -1
@@ -586,9 +586,22 @@ static struct dma_async_tx_descriptor *c
 	enum dma_transfer_direction dir, unsigned long tx_flags, void *context)
 {
 	struct cppi41_channel *c = to_cpp41_chan(chan);
+	struct dma_async_tx_descriptor *txd = NULL;
+	struct cppi41_dd *cdd = c->cdd;
 	struct cppi41_desc *d;
 	struct scatterlist *sg;
 	unsigned int i;
+	int error;
+
+	error = pm_runtime_get(cdd->ddev.dev);
+	if (error < 0) {
+		pm_runtime_put_noidle(cdd->ddev.dev);
+
+		return NULL;
+	}
+
+	if (cdd->is_suspended)
+		goto err_out_not_ready;
 
 	d = c->desc;
 	for_each_sg(sgl, sg, sg_len, i) {
@@ -611,7 +624,13 @@ static struct dma_async_tx_descriptor *c
 		d++;
 	}
 
-	return &c->txd;
+	txd = &c->txd;
+
+err_out_not_ready:
+	pm_runtime_mark_last_busy(cdd->ddev.dev);
+	pm_runtime_put_autosuspend(cdd->ddev.dev);
+
+	return txd;
 }
 
 static void cppi41_compute_td_desc(struct cppi41_desc *d)
author maintainer
#55 lore raw

PATCH 51/62 llc: fix sk_buff leak in llc_sap_state_process()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit c6ee11c39fcc1fb55130748990a8f199e76263b4 upstream.

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff888116270800 (size 224):
       comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff  . .*.....@=*....
       backtrace:
         [<000000004d41b4cc>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250  net/core/skbuff.c:5327
         [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0  net/core/sock.c:2225
         [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242
         [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933
         [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline]
         [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671
         [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964
	 [...]

The bug is that llc_sap_state_process() always takes an extra reference to the skb, but sometimes neither llc_sap_next_state() nor llc_sap_state_process() itself drops this reference.

Fix it by changing llc_sap_next_state() to never consume a reference to the skb, rather than sometimes do so and sometimes not. Then remove the extra skb_get() and kfree_skb() from llc_sap_state_process().

Reported-by [email protected]
Reported-by [email protected]
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/llc/llc_s_ac.c |   12 +++++++++---
 net/llc/llc_sap.c  |   23 ++++++++---------------
 2 files changed, 17 insertions(+), 18 deletions(-)
net/llc/llc_s_ac.c +9 -3
@@ -58,8 +58,10 @@ int llc_sap_action_send_ui(struct llc_sa
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_ui_cmd(skb);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
@@ -81,8 +83,10 @@ int llc_sap_action_send_xid_c(struct llc
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_xid_cmd(skb, LLC_XID_NULL_CLASS_2, 0);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
@@ -135,8 +139,10 @@ int llc_sap_action_send_test_c(struct ll
 			    ev->daddr.lsap, LLC_PDU_CMD);
 	llc_pdu_init_as_test_cmd(skb);
 	rc = llc_mac_hdr_init(skb, ev->saddr.mac, ev->daddr.mac);
-	if (likely(!rc))
+	if (likely(!rc)) {
+		skb_get(skb);
 		rc = dev_queue_xmit(skb);
+	}
 	return rc;
 }
 
net/llc/llc_sap.c +8 -15
@@ -197,29 +197,22 @@ out:
  *	After executing actions of the event, upper layer will be indicated
  *	if needed(on receiving an UI frame). sk can be null for the
  *	datalink_proto case.
+ *
+ *	This function always consumes a reference to the skb.
  */
 static void llc_sap_state_process(struct llc_sap *sap, struct sk_buff *skb)
 {
 	struct llc_sap_state_ev *ev = llc_sap_ev(skb);
 
-	/*
-	 * We have to hold the skb, because llc_sap_next_state
-	 * will kfree it in the sending path and we need to
-	 * look at the skb->cb, where we encode llc_sap_state_ev.
-	 */
-	skb_get(skb);
 	ev->ind_cfm_flag = 0;
 	llc_sap_next_state(sap, skb);
-	if (ev->ind_cfm_flag == LLC_IND) {
-		if (skb->sk->sk_state == TCP_LISTEN)
-			kfree_skb(skb);
-		else {
-			llc_save_primitive(skb->sk, skb, ev->prim);
 
-			/* queue skb to the user. */
-			if (sock_queue_rcv_skb(skb->sk, skb))
-				kfree_skb(skb);
-		}
+	if (ev->ind_cfm_flag == LLC_IND && skb->sk->sk_state != TCP_LISTEN) {
+		llc_save_primitive(skb->sk, skb, ev->prim);
+
+		/* queue skb to the user. */
+		if (sock_queue_rcv_skb(skb->sk, skb) == 0)
+			return;
 	}
 	kfree_skb(skb);
 }
author maintainer
#56 lore raw

PATCH 52/62 llc: fix sk_buff leak in llc_conn_service()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit b74555de21acd791f12c4a1aeaf653dd7ac21133 upstream.

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff88811eb3de00 (size 224):
       comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff  ..8$............
       backtrace:
         [<000000008d1c66a1>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54
         [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140  net/llc/llc_c_ac.c:777
         [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475  [inline]
         [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline]
         [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640  net/llc/llc_conn.c:75
         [<00000000f27e53c1>] llc_establish_connection+0x110/0x170  net/llc/llc_if.c:109
         [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477
         [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840
         [...]

The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c3f81 ("llc:
properly handle dev_queue_xmit() return value") it doesn't.

Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before.

Fixes b85ab56c3f81 ("llc: properly handle dev_queue_xmit() return value")
Reported-by [email protected]
---
 include/net/llc_conn.h |    2 +-
 net/llc/llc_c_ac.c     |    8 ++++++--
 net/llc/llc_conn.c     |   32 +++++++++-----------------------
 3 files changed, 16 insertions(+), 26 deletions(-)
include/net/llc_conn.h +1 -1
@@ -104,7 +104,7 @@ void llc_sk_reset(struct sock *sk);
 
 /* Access to a connection */
 int llc_conn_state_process(struct sock *sk, struct sk_buff *skb);
-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
+void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit);
 void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit);
net/llc/llc_c_ac.c +6 -2
@@ -372,6 +372,7 @@ int llc_conn_ac_send_i_cmd_p_set_1(struc
 	llc_pdu_init_as_i_cmd(skb, 1, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
+		skb_get(skb);
 		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
@@ -389,7 +390,8 @@ static int llc_conn_ac_send_i_cmd_p_set_
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		rc = llc_conn_send_pdu(sk, skb);
+		skb_get(skb);
+		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
@@ -406,6 +408,7 @@ int llc_conn_ac_send_i_xxx_x_set_0(struc
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
+		skb_get(skb);
 		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
@@ -916,7 +919,8 @@ static int llc_conn_ac_send_i_rsp_f_set_
 	llc_pdu_init_as_i_cmd(skb, llc->ack_pf, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		rc = llc_conn_send_pdu(sk, skb);
+		skb_get(skb);
+		llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
net/llc/llc_conn.c +9 -23
@@ -30,7 +30,7 @@
 #endif
 
 static int llc_find_offset(int state, int ev_type);
-static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *skb);
+static void llc_conn_send_pdus(struct sock *sk);
 static int llc_conn_service(struct sock *sk, struct sk_buff *skb);
 static int llc_exec_conn_trans_actions(struct sock *sk,
 				       struct llc_conn_state_trans *trans,
@@ -193,11 +193,11 @@ out_skb_put:
 	return rc;
 }
 
-int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
+void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
 {
 	/* queue PDU to send to MAC layer */
 	skb_queue_tail(&sk->sk_write_queue, skb);
-	return llc_conn_send_pdus(sk, skb);
+	llc_conn_send_pdus(sk);
 }
 
 /**
@@ -255,7 +255,7 @@ void llc_conn_resend_i_pdu_as_cmd(struct
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk, NULL);
+	llc_conn_send_pdus(sk);
 out:;
 }
 
@@ -296,7 +296,7 @@ void llc_conn_resend_i_pdu_as_rsp(struct
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk, NULL);
+	llc_conn_send_pdus(sk);
 out:;
 }
 
@@ -340,16 +340,12 @@ out:
 /**
  *	llc_conn_send_pdus - Sends queued PDUs
  *	@sk: active connection
- *	@hold_skb: the skb held by caller, or NULL if does not care
  *
- *	Sends queued pdus to MAC layer for transmission. When @hold_skb is
- *	NULL, always return 0. Otherwise, return 0 if @hold_skb is sent
- *	successfully, or 1 for failure.
+ *	Sends queued pdus to MAC layer for transmission.
  */
-static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb)
+static void llc_conn_send_pdus(struct sock *sk)
 {
 	struct sk_buff *skb;
-	int ret = 0;
 
 	while ((skb = skb_dequeue(&sk->sk_write_queue)) != NULL) {
 		struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -361,20 +357,10 @@ static int llc_conn_send_pdus(struct soc
 			skb_queue_tail(&llc_sk(sk)->pdu_unack_q, skb);
 			if (!skb2)
 				break;
-			dev_queue_xmit(skb2);
-		} else {
-			bool is_target = skb == hold_skb;
-			int rc;
-
-			if (is_target)
-				skb_get(skb);
-			rc = dev_queue_xmit(skb);
-			if (is_target)
-				ret = rc;
+			skb = skb2;
 		}
+		dev_queue_xmit(skb);
 	}
-
-	return ret;
 }
 
 /**
author maintainer
#57 lore raw

PATCH 53/62 bonding: fix potential NULL deref in bond_update_slave_arr

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

commit a7137534b597b7c303203e6bc3ed87e87a273bb8 upstream.

syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr

A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL.

[1]

Failed to build slave-array.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access

general protection fault: 0000 [#1] SMP KASAN PTI
Modules linked in:
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039
RSP: 0018:ffff88018fe33678 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000
RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20
RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0
FS:  00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923
 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline]
 [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562
 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328
 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495
 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088
 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196
 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline]
 [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline]
 [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688
 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline]
 [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696
 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305
 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Cc Mahesh Bandewar <[email protected]>
---
 drivers/net/bonding/bond_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +1 -1
@@ -3963,7 +3963,7 @@ out:
 		 * this to-be-skipped slave to send a packet out.
 		 */
 		old_arr = rtnl_dereference(bond->slave_arr);
-		for (idx = 0; idx < old_arr->count; idx++) {
+		for (idx = 0; old_arr != NULL && idx < old_arr->count; idx++) {
 			if (skipslave == old_arr->arr[idx]) {
 				old_arr->arr[idx] =
 				    old_arr->arr[old_arr->count-1];
author maintainer
#58 lore raw

PATCH 54/62 net: usb: sr9800: fix uninitialized local variable

In reply to Greg Kroah-Hartman

From: Valentin Vidic <[email protected]>

commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 upstream.

Make sure res does not contain random value if the call to sr_read_cmd fails for some reason.

---
 drivers/net/usb/sr9800.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/usb/sr9800.c +1 -1
@@ -336,7 +336,7 @@ static void sr_set_multicast(struct net_
 static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(net);
-	__le16 res;
+	__le16 res = 0;
 
 	mutex_lock(&dev->phy_mutex);
 	sr_set_sw_mii(dev);
author maintainer
#59 lore raw

PATCH 55/62 sch_netem: fix rcu splat in netem_enqueue()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

commit 159d2c7d8106177bd9a986fd005a311fe0d11285 upstream.

qdisc_root() use from netem_enqueue() triggers a lockdep warning.

__dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned.

WARNING: suspicious RCU usage
5.3.0-rc7+ #0 Not tainted
-----------------------------
include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor427/8855:
#0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838

stack backtrace:
CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357
 qdisc_root include/net/sch_generic.h:492 [inline]
 netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479
 __dev_xmit_skb net/core/dev.c:3527 [inline]
 __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902
 neigh_hh_output include/net/neighbour.h:500 [inline]
 neigh_output include/net/neighbour.h:509 [inline]
 ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290
 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125
 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555
 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887
 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174
 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
---
 include/net/sch_generic.h |    5 +++++
 net/sched/sch_netem.c     |    2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)
include/net/sch_generic.h +5 -0
@@ -276,6 +276,11 @@ static inline struct Qdisc *qdisc_root(c
 	return q;
 }
 
+static inline struct Qdisc *qdisc_root_bh(const struct Qdisc *qdisc)
+{
+	return rcu_dereference_bh(qdisc->dev_queue->qdisc);
+}
+
 static inline struct Qdisc *qdisc_root_sleeping(const struct Qdisc *qdisc)
 {
 	return qdisc->dev_queue->qdisc_sleeping;
net/sched/sch_netem.c +1 -1
@@ -475,7 +475,7 @@ static int netem_enqueue(struct sk_buff
 	 * skb will be queued.
 	 */
 	if (count > 1 && (skb2 = skb_clone(skb, GFP_ATOMIC)) != NULL) {
-		struct Qdisc *rootq = qdisc_root(sch);
+		struct Qdisc *rootq = qdisc_root_bh(sch);
 		u32 dupsave = q->duplicate; /* prevent duplicating a dup... */
 
 		q->duplicate = 0;
author maintainer
#60 lore raw

PATCH 56/62 sctp: fix the issue that flags are ignored when using kernel_connect

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit 644fbdeacf1d3edd366e44b8ba214de9d1dd66a9 upstream.

Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags param can't be passed into its proto .connect where this flags is really needed.

sctp works around it by getting flags from socket file in __sctp_connect. It works for connecting from userspace, as inherently the user sock has socket file and it passes f_flags as the flags param into the proto_ops .connect.

However, the sock created by sock_create_kern doesn't have a socket file, and it passes the flags (like O_NONBLOCK) by using the flags param in kernel_connect, which calls proto_ops .connect later.

So to fix it, this patch defines a new proto_ops .connect for sctp, sctp_inet_connect, which calls __sctp_connect() directly with this flags param. After this, the sctp's proto .connect can be removed.

Note that sctp_inet_connect doesn't need to do some checks that are not needed for sctp, which makes thing better than with inet_dgram_connect.

---
 include/net/sctp/sctp.h |    2 +
 net/sctp/ipv6.c         |    2 -
 net/sctp/protocol.c     |    2 -
 net/sctp/socket.c       |   56 ++++++++++++++++++++++++++++++++----------------
 4 files changed, 42 insertions(+), 20 deletions(-)
include/net/sctp/sctp.h +2 -0
@@ -103,6 +103,8 @@ void sctp_addr_wq_mgmt(struct net *, str
 /*
  * sctp/socket.c
  */
+int sctp_inet_connect(struct socket *sock, struct sockaddr *uaddr,
+		      int addr_len, int flags);
 int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb);
 int sctp_inet_listen(struct socket *sock, int backlog);
 void sctp_write_space(struct sock *sk);
net/sctp/ipv6.c +1 -1
@@ -973,7 +973,7 @@ static const struct proto_ops inet6_seqp
 	.owner		   = THIS_MODULE,
 	.release	   = inet6_release,
 	.bind		   = inet6_bind,
-	.connect	   = inet_dgram_connect,
+	.connect	   = sctp_inet_connect,
 	.socketpair	   = sock_no_socketpair,
 	.accept		   = inet_accept,
 	.getname	   = sctp_getname,
net/sctp/protocol.c +1 -1
@@ -1014,7 +1014,7 @@ static const struct proto_ops inet_seqpa
 	.owner		   = THIS_MODULE,
 	.release	   = inet_release,	/* Needs to be wrapped... */
 	.bind		   = inet_bind,
-	.connect	   = inet_dgram_connect,
+	.connect	   = sctp_inet_connect,
 	.socketpair	   = sock_no_socketpair,
 	.accept		   = inet_accept,
 	.getname	   = inet_getname,	/* Semantics are different.  */
net/sctp/socket.c +38 -18

126 lines not on this page · raw message

author maintainer
#61 lore raw

PATCH 57/62 sctp: not bind the socket in sctp_connect

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit 9b6c08878e23adb7cc84bdca94d8a944b03f099e upstream.

Now when sctp_connect() is called with a wrong sa_family, it binds to a port but doesn't set bp->port, then sctp_get_af_specific will return NULL and sctp_connect() returns -EINVAL.

Then if sctp_bind() is called to bind to another port, the last port it has bound will leak due to bp->port is NULL by then.

sctp_connect() doesn't need to bind ports, as later __sctp_connect will do it if bp->port is NULL. So remove it from sctp_connect(). While at it, remove the unnecessary sockaddr.sa_family len check as it's already done in sctp_inet_connect.

Fixes 644fbdeacf1d ("sctp: fix the issue that flags are ignored when using kernel_connect")
Reported-by [email protected]
---
 net/sctp/socket.c |   21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)
net/sctp/socket.c +2 -19
@@ -3981,34 +3981,17 @@ out_nounlock:
 static int sctp_connect(struct sock *sk, struct sockaddr *addr,
 			int addr_len, int flags)
 {
-	struct inet_sock *inet = inet_sk(sk);
 	struct sctp_af *af;
-	int err = 0;
+	int err = -EINVAL;
 
 	lock_sock(sk);
-
 	pr_debug("%s: sk:%p, sockaddr:%p, addr_len:%d\n", __func__, sk,
 		 addr, addr_len);
 
-	/* We may need to bind the socket. */
-	if (!inet->inet_num) {
-		if (sk->sk_prot->get_port(sk, 0)) {
-			release_sock(sk);
-			return -EAGAIN;
-		}
-		inet->inet_sport = htons(inet->inet_num);
-	}
-
 	/* Validate addr_len before calling common connect/connectx routine. */
 	af = sctp_get_af_specific(addr->sa_family);
-	if (!af || addr_len < af->sockaddr_len) {
-		err = -EINVAL;
-	} else {
-		/* Pass correct addr len to common routine (so it knows there
-		 * is only one address being passed.
-		 */
+	if (af && addr_len >= af->sockaddr_len)
 		err = __sctp_connect(sk, addr, af->sockaddr_len, flags, NULL);
-	}
 
 	release_sock(sk);
 	return err;
author maintainer
#62 lore raw

PATCH 58/62 xfs: Correctly invert xfs_buftarg LRU isolation logic

In reply to Greg Kroah-Hartman

From: Vratislav Bendel <[email protected]>

commit 19957a181608d25c8f4136652d0ea00b3738972d upstream.

Due to an inverted logic mistake in xfs_buftarg_isolate() the xfs_buffers with zero b_lru_ref will take another trip around LRU, while isolating buffers with non-zero b_lru_ref.

Additionally those isolated buffers end up right back on the LRU once they are released, because b_lru_ref remains elevated.

Fix that circuitous route by leaving them on the LRU as originally intended.

---
 fs/xfs/xfs_buf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/xfs/xfs_buf.c +1 -1
@@ -1674,7 +1674,7 @@ xfs_buftarg_isolate(
 	 * zero. If the value is already zero, we need to reclaim the
 	 * buffer, otherwise it gets another trip through the LRU.
 	 */
-	if (!atomic_add_unless(&bp->b_lru_ref, -1, 0)) {
+	if (atomic_add_unless(&bp->b_lru_ref, -1, 0)) {
 		spin_unlock(&bp->b_lock);
 		return LRU_ROTATE;
 	}
author maintainer
#63 lore raw

PATCH 59/62 ALSA: timer: Follow standard EXPORT_SYMBOL() declarations

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 988563929d5b65c021439880ac6bd1b207722f26 ]

Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations in order to improve grep-ability.

- Move EXPORT_SYMBOL*() to the position right after its definition

---
 sound/core/timer.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)
sound/core/timer.c +13 -14
index 152254193c697..cfcc6718aafce 100644
@@ -318,6 +318,7 @@ int snd_timer_open(struct snd_timer_instance **ti,
 	*ti = timeri;
 	return 0;
 }
+EXPORT_SYMBOL(snd_timer_open);
 
 /*
  * close a timer instance
@@ -383,6 +384,7 @@ int snd_timer_close(struct snd_timer_instance *timeri)
 	mutex_unlock(&register_mutex);
 	return 0;
 }
+EXPORT_SYMBOL(snd_timer_close);
 
 unsigned long snd_timer_resolution(struct snd_timer_instance *timeri)
 {
@@ -397,6 +399,7 @@ unsigned long snd_timer_resolution(struct snd_timer_instance *timeri)
 	}
 	return 0;
 }
+EXPORT_SYMBOL(snd_timer_resolution);
 
 static void snd_timer_notify1(struct snd_timer_instance *ti, int event)
 {
@@ -588,6 +591,7 @@ int snd_timer_start(struct snd_timer_instance *timeri, unsigned int ticks)
 	else
 		return snd_timer_start1(timeri, true, ticks);
 }
+EXPORT_SYMBOL(snd_timer_start);
 
 /*
  * stop the timer instance.
@@ -601,6 +605,7 @@ int snd_timer_stop(struct snd_timer_instance *timeri)
 	else
 		return snd_timer_stop1(timeri, true);
 }
+EXPORT_SYMBOL(snd_timer_stop);
 
 /*
  * start again..  the tick is kept.
@@ -616,6 +621,7 @@ int snd_timer_continue(struct snd_timer_instance *timeri)
 	else
 		return snd_timer_start1(timeri, false, 0);
 }
+EXPORT_SYMBOL(snd_timer_continue);
 
 /*
  * pause.. remember the ticks left
@@ -627,6 +633,7 @@ int snd_timer_pause(struct snd_timer_instance * timeri)
 	else
 		return snd_timer_stop1(timeri, false);
 }
+EXPORT_SYMBOL(snd_timer_pause);
 
 /*
  * reschedule the timer
@@ -808,6 +815,7 @@ void snd_timer_interrupt(struct snd_timer * timer, unsigned long ticks_left)
 	if (use_tasklet)
 		tasklet_schedule(&timer->task_queue);
 }
+EXPORT_SYMBOL(snd_timer_interrupt);
 
 /*
 
@@ -858,6 +866,7 @@ int snd_timer_new(struct snd_card *card, char *id, struct snd_timer_id *tid,
 		*rtimer = timer;
 	return 0;
 }
+EXPORT_SYMBOL(snd_timer_new);
 
 static int snd_timer_free(struct snd_timer *timer)
 {
@@ -977,6 +986,7 @@ void snd_timer_notify(struct snd_timer *timer, int event, struct timespec *tstam
 	}
 	spin_unlock_irqrestore(&timer->lock, flags);
 }
+EXPORT_SYMBOL(snd_timer_notify);
 
 /*
  * exported functions for global timers
@@ -992,11 +1002,13 @@ int snd_timer_global_new(char *id, int device, struct snd_timer **rtimer)
 	tid.subdevice = 0;
 	return snd_timer_new(NULL, id, &tid, rtimer);
 }
+EXPORT_SYMBOL(snd_timer_global_new);
 
 int snd_timer_global_free(struct snd_timer *timer)
 {
 	return snd_timer_free(timer);
 }
+EXPORT_SYMBOL(snd_timer_global_free);
 
 int snd_timer_global_register(struct snd_timer *timer)
 {
@@ -1006,6 +1018,7 @@ int snd_timer_global_register(struct snd_timer *timer)
 	dev.device_data = timer;
 	return snd_timer_dev_register(&dev);
 }
+EXPORT_SYMBOL(snd_timer_global_register);
 
 /*
  *  System timer
@@ -2121,17 +2134,3 @@ static void __exit alsa_timer_exit(void)
 
 module_init(alsa_timer_init)
 module_exit(alsa_timer_exit)
-
-EXPORT_SYMBOL(snd_timer_open);
-EXPORT_SYMBOL(snd_timer_close);
-EXPORT_SYMBOL(snd_timer_resolution);
-EXPORT_SYMBOL(snd_timer_start);
-EXPORT_SYMBOL(snd_timer_stop);
-EXPORT_SYMBOL(snd_timer_continue);
-EXPORT_SYMBOL(snd_timer_pause);
-EXPORT_SYMBOL(snd_timer_new);
-EXPORT_SYMBOL(snd_timer_notify);
-EXPORT_SYMBOL(snd_timer_global_new);
-EXPORT_SYMBOL(snd_timer_global_free);
-EXPORT_SYMBOL(snd_timer_global_register);
-EXPORT_SYMBOL(snd_timer_interrupt);
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 60/62 ALSA: timer: Limit max instances per timer

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 9b7d869ee5a77ed4a462372bb89af622e705bfb8 ]

Currently we allow unlimited number of timer instances, and it may bring the system hogging way too much CPU when too many timer instances are opened and processed concurrently. This may end up with a soft-lockup report as triggered by syzkaller, especially when hrtimer backend is deployed.

Since such insane number of instances aren't demanded by the normal use case of ALSA sequencer and it merely opens a risk only for abuse, this patch introduces the upper limit for the number of instances per timer backend. As default, it's set to 1000, but for the fine-grained timer like hrtimer, it's set to 100.

---
 include/sound/timer.h |  2 ++
 sound/core/hrtimer.c  |  1 +
 sound/core/timer.c    | 67 ++++++++++++++++++++++++++++++++++---------
 3 files changed, 57 insertions(+), 13 deletions(-)
include/sound/timer.h +2 -0
index c4d76ff056c6e..7ae226ab69908 100644
@@ -90,6 +90,8 @@ struct snd_timer {
 	struct list_head ack_list_head;
 	struct list_head sack_list_head; /* slow ack list head */
 	struct tasklet_struct task_queue;
+	int max_instances;	/* upper limit of timer instances */
+	int num_instances;	/* current number of timer instances */
 };
 
 struct snd_timer_instance {
sound/core/hrtimer.c +1 -0
index e2f27022b363c..d7dddb75e7bb8 100644
@@ -159,6 +159,7 @@ static int __init snd_hrtimer_init(void)
 	timer->hw = hrtimer_hw;
 	timer->hw.resolution = resolution;
 	timer->hw.ticks = NANO_SEC / resolution;
+	timer->max_instances = 100; /* lower the limit */
 
 	err = snd_timer_global_register(timer);
 	if (err < 0) {
sound/core/timer.c +54 -13

173 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 61/62 ALSA: timer: Simplify error path in snd_timer_open()

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 41672c0c24a62699d20aab53b98d843b16483053 ]

Just a minor refactoring to use the standard goto for error paths in snd_timer_open() instead of open code. The first mutex_lock() is moved to the beginning of the function to make the code clearer.

---
 sound/core/timer.c | 39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)
sound/core/timer.c +20 -19
index 95c5838747754..6eb4e97662d9c 100644
@@ -253,19 +253,20 @@ int snd_timer_open(struct snd_timer_instance **ti,
 	struct snd_timer_instance *timeri = NULL;
 	int err;
 
+	mutex_lock(&register_mutex);
 	if (tid->dev_class == SNDRV_TIMER_CLASS_SLAVE) {
 		/* open a slave instance */
 		if (tid->dev_sclass <= SNDRV_TIMER_SCLASS_NONE ||
 		    tid->dev_sclass > SNDRV_TIMER_SCLASS_OSS_SEQUENCER) {
 			pr_debug("ALSA: timer: invalid slave class %i\n",
 				 tid->dev_sclass);
-			return -EINVAL;
+			err = -EINVAL;
+			goto unlock;
 		}
-		mutex_lock(&register_mutex);
 		timeri = snd_timer_instance_new(owner, NULL);
 		if (!timeri) {
-			mutex_unlock(&register_mutex);
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto unlock;
 		}
 		timeri->slave_class = tid->dev_sclass;
 		timeri->slave_id = tid->device;
@@ -276,13 +277,10 @@ int snd_timer_open(struct snd_timer_instance **ti,
 			snd_timer_close_locked(timeri);
 			timeri = NULL;
 		}
-		mutex_unlock(&register_mutex);
-		*ti = timeri;
-		return err;
+		goto unlock;
 	}
 
 	/* open a master instance */
-	mutex_lock(&register_mutex);
 	timer = snd_timer_find(tid);
 #ifdef CONFIG_MODULES
 	if (!timer) {
@@ -293,25 +291,26 @@ int snd_timer_open(struct snd_timer_instance **ti,
 	}
 #endif
 	if (!timer) {
-		mutex_unlock(&register_mutex);
-		return -ENODEV;
+		err = -ENODEV;
+		goto unlock;
 	}
 	if (!list_empty(&timer->open_list_head)) {
 		timeri = list_entry(timer->open_list_head.next,
 				    struct snd_timer_instance, open_list);
 		if (timeri->flags & SNDRV_TIMER_IFLG_EXCLUSIVE) {
-			mutex_unlock(&register_mutex);
-			return -EBUSY;
+			err = -EBUSY;
+			timeri = NULL;
+			goto unlock;
 		}
 	}
 	if (timer->num_instances >= timer->max_instances) {
-		mutex_unlock(&register_mutex);
-		return -EBUSY;
+		err = -EBUSY;
+		goto unlock;
 	}
 	timeri = snd_timer_instance_new(owner, timer);
 	if (!timeri) {
-		mutex_unlock(&register_mutex);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto unlock;
 	}
 	/* take a card refcount for safe disconnection */
 	if (timer->card)
@@ -320,16 +319,16 @@ int snd_timer_open(struct snd_timer_instance **ti,
 	timeri->slave_id = slave_id;
 
 	if (list_empty(&timer->open_list_head) && timer->hw.open) {
-		int err = timer->hw.open(timer);
+		err = timer->hw.open(timer);
 		if (err) {
 			kfree(timeri->owner);
 			kfree(timeri);
+			timeri = NULL;
 
 			if (timer->card)
 				put_device(&timer->card->card_dev);
 			module_put(timer->module);
-			mutex_unlock(&register_mutex);
-			return err;
+			goto unlock;
 		}
 	}
 
@@ -340,6 +339,8 @@ int snd_timer_open(struct snd_timer_instance **ti,
 		snd_timer_close_locked(timeri);
 		timeri = NULL;
 	}
+
+ unlock:
 	mutex_unlock(&register_mutex);
 	*ti = timeri;
 	return err;
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 62/62 ALSA: timer: Fix mutex deadlock at releasing card

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit a39331867335d4a94b6165e306265c9e24aca073 ]

When a card is disconnected while in use, the system waits until all opened files are closed then releases the card. This is done via put_device() of the card device in each device release code.

The recently reported mutex deadlock bug happens in this code path; snd_timer_close() for the timer device deals with the global register_mutex and it calls put_device() there. When this timer device is the last one, the card gets freed and it eventually calls snd_timer_free(), which has again the protection with the global register_mutex -- boom.

Basically put_device() call itself is race-free, so a relative simple workaround is to move this put_device() call out of the mutex. For achieving that, in this patch, snd_timer_close_locked() got a new argument to store the card device pointer in return, and each caller invokes put_device() with the returned object after the mutex unlock.

---
 sound/core/timer.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)
sound/core/timer.c +17 -7
index 6eb4e97662d9c..19d90aa082184 100644
@@ -239,7 +239,8 @@ static int snd_timer_check_master(struct snd_timer_instance *master)
 	return 0;
 }
 
-static int snd_timer_close_locked(struct snd_timer_instance *timeri);
+static int snd_timer_close_locked(struct snd_timer_instance *timeri,
+				  struct device **card_devp_to_put);
 
 /*
  * open a timer instance
@@ -251,6 +252,7 @@ int snd_timer_open(struct snd_timer_instance **ti,
 {
 	struct snd_timer *timer;
 	struct snd_timer_instance *timeri = NULL;
+	struct device *card_dev_to_put = NULL;
 	int err;
 
 	mutex_lock(&register_mutex);
@@ -274,7 +276,7 @@ int snd_timer_open(struct snd_timer_instance **ti,
 		list_add_tail(&timeri->open_list, &snd_timer_slave_list);
 		err = snd_timer_check_slave(timeri);
 		if (err < 0) {
-			snd_timer_close_locked(timeri);
+			snd_timer_close_locked(timeri, &card_dev_to_put);
 			timeri = NULL;
 		}
 		goto unlock;
@@ -326,7 +328,7 @@ int snd_timer_open(struct snd_timer_instance **ti,
 			timeri = NULL;
 
 			if (timer->card)
-				put_device(&timer->card->card_dev);
+				card_dev_to_put = &timer->card->card_dev;
 			module_put(timer->module);
 			goto unlock;
 		}
@@ -336,12 +338,15 @@ int snd_timer_open(struct snd_timer_instance **ti,
 	timer->num_instances++;
 	err = snd_timer_check_master(timeri);
 	if (err < 0) {
-		snd_timer_close_locked(timeri);
+		snd_timer_close_locked(timeri, &card_dev_to_put);
 		timeri = NULL;
 	}
 
  unlock:
 	mutex_unlock(&register_mutex);
+	/* put_device() is called after unlock for avoiding deadlock */
+	if (card_dev_to_put)
+		put_device(card_dev_to_put);
 	*ti = timeri;
 	return err;
 }
@@ -351,7 +356,8 @@ EXPORT_SYMBOL(snd_timer_open);
  * close a timer instance
  * call this with register_mutex down.
  */
-static int snd_timer_close_locked(struct snd_timer_instance *timeri)
+static int snd_timer_close_locked(struct snd_timer_instance *timeri,
+				  struct device **card_devp_to_put)
 {
 	struct snd_timer *timer = NULL;
 	struct snd_timer_instance *slave, *tmp;
@@ -403,7 +409,7 @@ static int snd_timer_close_locked(struct snd_timer_instance *timeri)
 			timer->hw.close(timer);
 		/* release a card refcount for safe disconnection */
 		if (timer->card)
-			put_device(&timer->card->card_dev);
+			*card_devp_to_put = &timer->card->card_dev;
 		module_put(timer->module);
 	}
 
@@ -415,14 +421,18 @@ static int snd_timer_close_locked(struct snd_timer_instance *timeri)
  */
 int snd_timer_close(struct snd_timer_instance *timeri)
 {
+	struct device *card_dev_to_put = NULL;
 	int err;
 
 	if (snd_BUG_ON(!timeri))
 		return -ENXIO;
 
 	mutex_lock(&register_mutex);
-	err = snd_timer_close_locked(timeri);
+	err = snd_timer_close_locked(timeri, &card_dev_to_put);
 	mutex_unlock(&register_mutex);
+	/* put_device() is called after unlock for avoiding deadlock */
+	if (card_dev_to_put)
+		put_device(card_dev_to_put);
 	return err;
 }
 EXPORT_SYMBOL(snd_timer_close);
Signature · 1 line
2.20.1
#67 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-4.9.y boot: 93 boots: 0 failed, 86 passed with 7 offline (v4.9.198-63-g1787d5fb47ee)

stable-rc/linux-4.9.y boot: 93 boots: 0 failed, 86 passed with 7 offline (v4.9.198-63-g1787d5fb47ee)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.198-63-g1787d5fb47ee/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.198-63-g1787d5fb47ee/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.198-63-g1787d5fb47ee
Git Commit: 1787d5fb47ee9c16fabc1473a713bfe3f3af7df7
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 49 unique boards, 20 SoC families, 14 builds out of 197

Offline Platforms:

arm:

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            dm365evm,legacy: 1 offline lab

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab

---
For more info write to <[email protected]>

#68 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.199 release. There are 62 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 06 Nov 2019 09:14:04 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.199-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.199-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 1787d5fb47ee9c16fabc1473a713bfe3f3af7df7
git describe: v4.9.198-63-g1787d5fb47ee
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.198-63-g1787d5fb47ee

No regressions (compared to build v4.9.198)

No fixes (compared to build v4.9.198)

Ran 23491 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* prep-tmp-disk
* ssuite

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
#69 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.199 release. There are 62 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 06 Nov 2019 09:14:04 PM UTC. Anything received after that time might be too late.

Build results:

	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 356 pass: 356 fail: 0

Guenter

#70 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.199 release. There are 62 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 06 Nov 2019 09:14:04 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.199-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

maintainer
#71 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.199 release. There are 62 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed 06 Nov 2019 09:14:04 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.199-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

All tests for Tegra are passing ...

Test results for stable-v4.9:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version: 4.9.199-rc1-g4e59c9878a95
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic