Update FE/BE trigger order based on the command
Subsystems (3)
v2 cover Update FE/BE trigger order based on the command
Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.
In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.
The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.
The above change has been tested with the Skylake driver on the Kabylake based chromebook and legacy HDA driver on Kabylake based Dell XPS13. It has also been tested on all platforms with SOF CI without any regressions for the past 3 weeks.
More details on the issue can be found here:
https://github.com/thesofproject/linux/issues/1160
Changes in v2:
Fixed comments on function name and consolidating the switch cases.
Ranjani Sridharan (2):
ASoC: pcm: update FE/BE trigger order based on the command
ASoC: SOF: topology: set trigger order for FE DAI link
sound/soc/soc-pcm.c | 95 ++++++++++++++++++++++++++++------------ sound/soc/sof/topology.c | 4 ++ 2 files changed, 72 insertions(+), 27 deletions(-)
Signature · 6 lines
2.17.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH v2 1/2 ASoC: pcm: update FE/BE trigger order based on the command
Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.
In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.
The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.
--- sound/soc/soc-pcm.c | 95 ++++++++++++++++++++++++++++++++------------- 1 file changed, 68 insertions(+), 27 deletions(-)
sound/soc/soc-pcm.c +68 -27
@@ -2329,42 +2329,81 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, }EXPORT_SYMBOL_GPL (dpcm_be_dai_trigger); +static int dpcm_dai_trigger_fe_be (struct snd_pcm_substream *substream, +int cmd,bool fe_first) +{ +struct snd_soc_pcm_runtime *fe = substream->private_data; +int ret; + +/* call trigger on the frontend before the backend. */ +if (fe_first) { +dev_dbg (fe->dev,"ASoC: pre trigger FE %s cmd %d\n" , + fe->dai_link->name, cmd); + + ret =soc_pcm_trigger (substream, cmd); +if (ret <0 ) +return ret; + + ret =dpcm_be_dai_trigger (fe, substream->stream, cmd); +return ret; + } + +/* call trigger on the frontend after the backend. */ + ret =dpcm_be_dai_trigger (fe, substream->stream, cmd); +if (ret <0 ) +return ret; + +dev_dbg (fe->dev,"ASoC: post trigger FE %s cmd %d\n" , + fe->dai_link->name, cmd); + + ret =soc_pcm_trigger (substream, cmd); + +return ret; +} +static int dpcm_fe_dai_do_trigger (struct snd_pcm_substream *substream,int cmd) {struct snd_soc_pcm_runtime *fe = substream->private_data; -int stream = substream->stream, ret; +int stream = substream->stream; +int ret =0 ;enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream]; fe->dpcm[stream].runtime_update =SND_SOC_DPCM_UPDATE_FE ;switch (trigger) {case SND_SOC_DPCM_TRIGGER_PRE : -/* call trigger on the frontend before the backend. */ - -dev_dbg (fe->dev,"ASoC: pre trigger FE %s cmd %d\n" , - fe->dai_link->name, cmd); - - ret =soc_pcm_trigger (substream, cmd); -if (ret <0 ) { -dev_err (fe->dev,"ASoC: trigger FE failed %d\n" , ret); - goto out; +switch (cmd) { +case SNDRV_PCM_TRIGGER_START : +case SNDRV_PCM_TRIGGER_RESUME : +case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : + ret =dpcm_dai_trigger_fe_be (substream, cmd, true); +break ; +case SNDRV_PCM_TRIGGER_STOP : +case SNDRV_PCM_TRIGGER_SUSPEND : +case SNDRV_PCM_TRIGGER_PAUSE_PUSH : + ret =dpcm_dai_trigger_fe_be (substream, cmd, false); +break ; +default : + ret = -EINVAL ; +break ; } - - ret =dpcm_be_dai_trigger (fe, substream->stream, cmd);break ;case SND_SOC_DPCM_TRIGGER_POST : -/* call trigger on the frontend after the backend. */ - - ret =dpcm_be_dai_trigger (fe, substream->stream, cmd); -if (ret <0 ) { -dev_err (fe->dev,"ASoC: trigger FE failed %d\n" , ret); - goto out; +switch (cmd) { +case SNDRV_PCM_TRIGGER_START : +case SNDRV_PCM_TRIGGER_RESUME : +case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : + ret =dpcm_dai_trigger_fe_be (substream, cmd, false); +break ; +case SNDRV_PCM_TRIGGER_STOP : +case SNDRV_PCM_TRIGGER_SUSPEND : +case SNDRV_PCM_TRIGGER_PAUSE_PUSH : + ret =dpcm_dai_trigger_fe_be (substream, cmd, true); +break ; +default : + ret = -EINVAL ; +break ; } - -dev_dbg (fe->dev,"ASoC: post trigger FE %s cmd %d\n" , - fe->dai_link->name, cmd); - - ret =soc_pcm_trigger (substream, cmd);break ;case SND_SOC_DPCM_TRIGGER_BESPOKE :/* bespoke trigger() - handles both FE and BEs */
@@ -2373,10 +2412,6 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) fe->dai_link->name, cmd); ret =soc_pcm_bespoke_trigger (substream, cmd); -if (ret <0 ) { -dev_err (fe->dev,"ASoC: trigger FE failed %d\n" , ret); - goto out; - }break ;default : dev_err(fe->dev, "ASoC: invalid trigger cmd %d for %s\n", cmd,
@@ -2385,6 +2420,12 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) goto out; } +if (ret <0 ) { +dev_err (fe->dev,"ASoC: trigger FE cmd: %d failed: %d\n" , + cmd, ret); + goto out; + } +switch (cmd) {case SNDRV_PCM_TRIGGER_START :case SNDRV_PCM_TRIGGER_RESUME :
Signature · 6 lines
2.17.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Mark Brown
maintainer[alsa-devel] Applied "ASoC: pcm: update FE/BE trigger order based on the command" to the asoc tree
The patch
ASoC: pcm: update FE/BE trigger order based on the command
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From acbf27746ecfa96b290b54cc7f05273482ea128a Mon Sep 17 00:00:00 2001
From: Ranjani Sridharan <[email protected]>
Date: Mon, 4 Nov 2019 14:48:11 -0800
Subject: [PATCH] ASoC: pcm: update FE/BE trigger order based on the command
Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command.
In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active.
The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.
--- sound/soc/soc-pcm.c | 95 ++++++++++++++++++++++++++++++++------------- 1 file changed, 68 insertions(+), 27 deletions(-)
sound/soc/soc-pcm.c +68 -27
@@ -2322,42 +2322,81 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, }EXPORT_SYMBOL_GPL (dpcm_be_dai_trigger); +static int dpcm_dai_trigger_fe_be (struct snd_pcm_substream *substream, +int cmd,bool fe_first) +{ +struct snd_soc_pcm_runtime *fe = substream->private_data; +int ret; + +/* call trigger on the frontend before the backend. */ +if (fe_first) { +dev_dbg (fe->dev,"ASoC: pre trigger FE %s cmd %d\n" , + fe->dai_link->name, cmd); + + ret =soc_pcm_trigger (substream, cmd); +if (ret <0 ) +return ret; + + ret =dpcm_be_dai_trigger (fe, substream->stream, cmd); +return ret; + } + +/* call trigger on the frontend after the backend. */ + ret =dpcm_be_dai_trigger (fe, substream->stream, cmd); +if (ret <0 ) +return ret; + +dev_dbg (fe->dev,"ASoC: post trigger FE %s cmd %d\n" , + fe->dai_link->name, cmd); + + ret =soc_pcm_trigger (substream, cmd); + +return ret; +} +static int dpcm_fe_dai_do_trigger (struct snd_pcm_substream *substream,int cmd) {struct snd_soc_pcm_runtime *fe = substream->private_data; -int stream = substream->stream, ret; +int stream = substream->stream; +int ret =0 ;enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream]; fe->dpcm[stream].runtime_update =SND_SOC_DPCM_UPDATE_FE ;switch (trigger) {case SND_SOC_DPCM_TRIGGER_PRE : -/* call trigger on the frontend before the backend. */ - -dev_dbg (fe->dev,"ASoC: pre trigger FE %s cmd %d\n" , - fe->dai_link->name, cmd); - - ret =soc_pcm_trigger (substream, cmd); -if (ret <0 ) { -dev_err (fe->dev,"ASoC: trigger FE failed %d\n" , ret); - goto out; +switch (cmd) { +case SNDRV_PCM_TRIGGER_START : +case SNDRV_PCM_TRIGGER_RESUME : +case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : + ret =dpcm_dai_trigger_fe_be (substream, cmd, true); +break ; +case SNDRV_PCM_TRIGGER_STOP : +case SNDRV_PCM_TRIGGER_SUSPEND : +case SNDRV_PCM_TRIGGER_PAUSE_PUSH : + ret =dpcm_dai_trigger_fe_be (substream, cmd, false); +break ; +default : + ret = -EINVAL ; +break ; } - - ret =dpcm_be_dai_trigger (fe, substream->stream, cmd);break ;case SND_SOC_DPCM_TRIGGER_POST : -/* call trigger on the frontend after the backend. */ - - ret =dpcm_be_dai_trigger (fe, substream->stream, cmd); -if (ret <0 ) { -dev_err (fe->dev,"ASoC: trigger FE failed %d\n" , ret); - goto out; +switch (cmd) { +case SNDRV_PCM_TRIGGER_START : +case SNDRV_PCM_TRIGGER_RESUME : +case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : + ret =dpcm_dai_trigger_fe_be (substream, cmd, false); +break ; +case SNDRV_PCM_TRIGGER_STOP : +case SNDRV_PCM_TRIGGER_SUSPEND : +case SNDRV_PCM_TRIGGER_PAUSE_PUSH : + ret =dpcm_dai_trigger_fe_be (substream, cmd, true); +break ; +default : + ret = -EINVAL ; +break ; } - -dev_dbg (fe->dev,"ASoC: post trigger FE %s cmd %d\n" , - fe->dai_link->name, cmd); - - ret =soc_pcm_trigger (substream, cmd);break ;case SND_SOC_DPCM_TRIGGER_BESPOKE :/* bespoke trigger() - handles both FE and BEs */
@@ -2366,10 +2405,6 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) fe->dai_link->name, cmd); ret =soc_pcm_bespoke_trigger (substream, cmd); -if (ret <0 ) { -dev_err (fe->dev,"ASoC: trigger FE failed %d\n" , ret); - goto out; - }break ;default : dev_err(fe->dev, "ASoC: invalid trigger cmd %d for %s\n", cmd,
@@ -2378,6 +2413,12 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) goto out; } +if (ret <0 ) { +dev_err (fe->dev,"ASoC: trigger FE cmd: %d failed: %d\n" , + cmd, ret); + goto out; + } +switch (cmd) {case SNDRV_PCM_TRIGGER_START :case SNDRV_PCM_TRIGGER_RESUME :
Signature · 6 lines
2.20.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH v2 2/2 ASoC: SOF: topology: set trigger order for FE DAI link
In reply to Ranjani SridharanSet trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST to trigger the BE DAI's before the FE DAI's. This prevents the xruns seen on playback pipelines using the link DMA.
--- sound/soc/sof/topology.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/soc/sof/topology.c +4 -0
@@ -2951,6 +2951,10 @@ static int sof_link_load(struct snd_soc_component *scomp, int index,if (!link->no_pcm) { link->nonatomic = true; +/* set trigger order */ + link->trigger[0 ] =SND_SOC_DPCM_TRIGGER_POST ; + link->trigger[1 ] =SND_SOC_DPCM_TRIGGER_POST ; +/* nothing more to do for FE dai links */ return 0 ; }
Signature · 6 lines
2.17.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Mark Brown
maintainer[alsa-devel] Applied "ASoC: SOF: topology: set trigger order for FE DAI link" to the asoc tree
The patch
ASoC: SOF: topology: set trigger order for FE DAI link
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 5eee2b3f60065a2530d13f28e771be48b989eb4c Mon Sep 17 00:00:00 2001
From: Ranjani Sridharan <[email protected]>
Date: Mon, 4 Nov 2019 14:48:12 -0800
Subject: [PATCH] ASoC: SOF: topology: set trigger order for FE DAI link
Set trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST to trigger the BE DAI's before the FE DAI's. This prevents the xruns seen on playback pipelines using the link DMA.
--- sound/soc/sof/topology.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/soc/sof/topology.c +4 -0
@@ -2951,6 +2951,10 @@ static int sof_link_load(struct snd_soc_component *scomp, int index,if (!link->no_pcm) { link->nonatomic = true; +/* set trigger order */ + link->trigger[0 ] =SND_SOC_DPCM_TRIGGER_POST ; + link->trigger[1 ] =SND_SOC_DPCM_TRIGGER_POST ; +/* nothing more to do for FE dai links */ return 0 ; }
Signature · 6 lines
2.20.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Jaroslav Kysela
maintainerRe: [alsa-devel] [PATCH v2 2/2] ASoC: SOF: topology: set trigger order for FE DAI link
In reply to Ranjani SridharanDne 04. 11. 19 v 23:48 Ranjani Sridharan napsal(a):
Quoted 16 lines
Set trigger order for FE DAI links to
SND_SOC_DPCM_TRIGGER_POSTto trigger the BE DAI's before the FE DAI's. This prevents the xruns seen on playback pipelines using the link DMA.Signed-off-by Ranjani Sridharan <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>--- sound/soc/sof/topology.c | 4 ++++ 1 file changed, 4 insertions(+)sound/soc/sof/topology.c +0
-0
sound/soc/sof/topology.c static int sof_link_load(struct snd_soc_component *scomp, int index, · line 2960
Quoted 10 lines
sound/soc/sof/topology.c +4
-0@@ -2951,6 +2951,10 @@ static int sof_link_load(struct snd_soc_component *scomp, int index,if (!link->no_pcm) { link->nonatomic = true; +/* set trigger order */ + link->trigger[0 ] =SND_SOC_DPCM_TRIGGER_POST ; + link->trigger[1 ] =SND_SOC_DPCM_TRIGGER_POST ; +/* nothing more to do for FE dai links */ return 0 ; }
It seems that this patch breaks the signed 1.3 firmware. Tested on Lenovo Carbon X1 7th gen.
https://github.com/thesofproject/sof/issues/2102
Jaroslav
Signature · 6 lines
Jaroslav Kysela <[email protected]> Linux Sound Maintainer; ALSA Project; Red Hat, Inc. _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Re: [alsa-devel] [PATCH v2 2/2] ASoC: SOF: topology: set trigger order for FE DAI link
Quoted 30 lines · Jaroslav Kysela
Dne 04. 11. 19 v 23:48 Ranjani Sridharan napsal(a):
Quoted 18 lines
Set trigger order for FE DAI links to
SND_SOC_DPCM_TRIGGER_POSTto trigger the BE DAI's before the FE DAI's. This prevents the xruns seen on playback pipelines using the link DMA.Signed-off-by Ranjani Sridharan <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>---
sound/soc/sof/topology.c| 4 ++++1 file changed, 4 insertions(+)sound/soc/sof/topology.c +0
-0@@ -2951,6 +2951,10 @@ static int sof_link_load(struct snd_soc_component *scomp, int index, if (!link->no_pcm) { link->nonatomic = true;Quoted 8 lines
+ /* set trigger order */
+ link->trigger[0] =SND_SOC_DPCM_TRIGGER_POST; + link->trigger[1] =SND_SOC_DPCM_TRIGGER_POST; +
/* nothing more to do for FE dai links */ return 0;
}It seems that this patch breaks the signed 1.3 firmware. Tested on Lenovo Carbon X1 7th gen.
Quoted 4 lines
https://github.com/thesofproject/sof/issues/2102
Jaroslav
Also met this problem, this patch is merged to 5.4 stable kernel, when I run the 5.4 stable kernel on the Lenovo Carbon x1 7th gen or Dell Dmic machines, the sof driver will print error logs repeatedly and the sof fails to work. I tried with both 1.3 and 1.4 firmware. If I reverted this patch from 5.4 stable kernel, the sof driver will work with both 1.3 and 1.4 firmware.
I also tried the 5.5-rc1 kernel, this kernel already includes this patch, but there is no issue for this kernel, the sof driver works well. So looks like only backport this patch to 5.4 stable kernel is not enough, either we revert this patch or we backport more patches to 5.4 stable kernel.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Re: [alsa-devel] [PATCH v2 2/2] ASoC: SOF: topology: set trigger order for FE DAI link
After cherry-pick this commit (acbf27746ecfa96b290b54cc7f05273482ea128a ASoC: pcm: update FE/BE trigger order based on the command) to 5.4 stable kernel, the sof driver works.
Quoted 38 lines · Hui Wang
Quoted 30 lines · Jaroslav Kysela
Dne 04. 11. 19 v 23:48 Ranjani Sridharan napsal(a):
Quoted 18 lines
Set trigger order for FE DAI links to
SND_SOC_DPCM_TRIGGER_POSTto trigger the BE DAI's before the FE DAI's. This prevents the xruns seen on playback pipelines using the link DMA.Signed-off-by Ranjani Sridharan <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>---
sound/soc/sof/topology.c| 4 ++++1 file changed, 4 insertions(+)sound/soc/sof/topology.c +0
-0@@ -2951,6 +2951,10 @@ static int sof_link_load(struct snd_soc_component *scomp, int index, if (!link->no_pcm) { link->nonatomic = true;Quoted 8 lines
+ /* set trigger order */
+ link->trigger[0] =SND_SOC_DPCM_TRIGGER_POST; + link->trigger[1] =SND_SOC_DPCM_TRIGGER_POST; +
/* nothing more to do for FE dai links */ return 0;
}It seems that this patch breaks the signed 1.3 firmware. Tested on Lenovo Carbon X1 7th gen.
Quoted 4 lines
https://github.com/thesofproject/sof/issues/2102
Jaroslav
Also met this problem, this patch is merged to 5.4 stable kernel, when I run the 5.4 stable kernel on the Lenovo Carbon x1 7th gen or Dell Dmic machines, the sof driver will print error logs repeatedly and the sof fails to work. I tried with both 1.3 and 1.4 firmware. If I reverted this patch from 5.4 stable kernel, the sof driver will work with both 1.3 and 1.4 firmware.
Quoted 7 lines
I also tried the 5.5-rc1 kernel, this kernel already includes this patch, but there is no issue for this kernel, the sof driver works well. So looks like only backport this patch to 5.4 stable kernel is not enough, either we revert this patch or we backport more patches to 5.4 stable kernel.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel