dt-bindings: sound: adau7118: Fix example warning
Subsystems (3)
PATCH v2 1/1 dt-bindings: sound: adau7118: Fix example warning
The ADAU7118 has an example where the codec has an i2c address of 14, and the unit address set to 14 as well.
However, while the address is expressed in decimal, the unit-address is supposed to be in hexadecimal, which ends up with two different addresses that trigger a DTC warning. Fix this by setting the address to 0x14.
---
Changes from v1:
- Fix the address instead of the unit-address.
--- Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/sound/adi,adau7118.yaml +1 -1
@@ -67,7 +67,7 @@ examples: #size-cells = <0>; adau7118_codec: audio-codec@14 { compatible = "adi,adau7118"; - reg = <14>; + reg = <0x14>; #sound-dai-cells = <0>; iovdd-supply = <&supply>; dvdd-supply = <&supply>;
Signature · 6 lines
2.23.0 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 13 lines · Maxime Ripard
The ADAU7118 has an example where the codec has an i2c address of 14, and the unit address set to 14 as well.
However, while the address is expressed in decimal, the unit-address is supposed to be in hexadecimal, which ends up with two different addresses that trigger a DTC warning. Fix this by setting the address to
0x14.Cc Nuno Sá <[email protected]>Cc Lars-Peter Clausen <[email protected]>Fixes 969d49b2cdc8 ("dt-bindings: asoc: Add ADAU7118 documentation")Signed-off-by Maxime Ripard <[email protected]>
Quoted 7 lines
---
Changes from v1:
- Fix the address instead of the unit-address.--- Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)