ARM: dts: imx6q-logicpd: Enable ili2117a Touchscreen
Subsystems (2)
PATCH v2 1/1 ARM: dts: imx6q-logicpd: Enable ili2117a Touchscreen
The LCD used with the imx6q-logicpd board has an integrated ili2117a touch controller connected to i2c1.
This patch adds the node to enable this feature.
---
ili2117 support is scheduled to be introduced for Kernel v5.5.
V2: Change node to touchscreen@26 and move comment about 5.5 to under the dashes
arch/arm/boot/dts/imx6q-logicpd.dts +10 -0
@@ -73,6 +73,16 @@ status = "okay"; }; +&i2c1 { + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + }; +}; + &ldb { status = "okay";
Signature · 1 line
2.20.1
Hi Adam,
Quoted 16 lines · Adam Ford
The LCD used with the imx6q-logicpd board has an integrated ili2117a touch controller connected to i2c1.
This patch adds the node to enable this feature.
Signed-off-by Adam Ford <[email protected]>---
ili2117 support is scheduled to be introduced for Kernel v5.5.V2: Change node to touchscreen@26 and move comment about 5.5 to under the dashes
arch/arm/boot/dts/imx6q-logicpd.dts +0
-0
arch/arm/boot/dts/imx6q-logicpd.dts line 81
Quoted 9 lines
arch/arm/boot/dts/imx6q-logicpd.dts +6
-0@@ -73,6 +73,16 @@ status = "okay"; }; +&i2c1 { + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>;
This phandle already exists?
Regards,
Marco
Quoted 12 lines
arch/arm/boot/dts/imx6q-logicpd.dts +4
-0+ interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + }; +}; + &ldb { status = "okay";Signature · 1 line
2.20.1
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Quoted 23 lines · Marco Felsch
Hi Adam,
Quoted 19 lines · Adam Ford
The LCD used with the imx6q-logicpd board has an integrated ili2117a touch controller connected to i2c1.
This patch adds the node to enable this feature.
Signed-off-by Adam Ford <[email protected]>---
ili2117 support is scheduled to be introduced for Kernel v5.5.V2: Change node to touchscreen@26 and move comment about 5.5 to under the dashes
arch/arm/boot/dts/imx6q-logicpd.dts +0
-0@@ -73,6 +73,16 @@ status = "okay"; };
Quoted 8 lines
arch/arm/boot/dts/imx6q-logicpd.dts line 81
Quoted 6 lines
arch/arm/boot/dts/imx6q-logicpd.dts +6
-0+&i2c1 { + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>;This phandle already exists?
Yes it does exist, but it probably should not have been since there was no user of it. At least this fixes that. :-)
adam
Quoted 22 lines
Regards,
MarcoQuoted 8 lines
arch/arm/boot/dts/imx6q-logicpd.dts +4
-1+ interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + }; +}; + &ldb { status = "okay"; --Quoted 4 lines
2.20.1
--
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Shawn Guo
AppliedQuoted 6 lines · Adam Ford
The LCD used with the imx6q-logicpd board has an integrated ili2117a touch controller connected to i2c1.
This patch adds the node to enable this feature.
Signed-off-by Adam Ford <[email protected]>
Applied, thanks.