Skip to contentSkip to conversation

ARM: dts: Configure interconnect target module for am437x sgx

PATCH New Tony Lindgren 1 participant 1 message Nov 8, 2019 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: Configure interconnect target module for am437x sgx

This seems to be similar to what we have for am335x. The following can be tested via sysfs with the to ensure the SGX module gets enabled and disabled properly:

# echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control
# rwmem 0x5600fe00              # revision register
0x5600fe00 = 0x40000000
# echo auto > /sys/bus/platform/devices/5600fe00.target-module/power/control
# rwmem 0x5000fe00
Bus error

Note that this patch depends on the PRM rstctrl driver that has been recently posted. If the child device driver(s) need to prevent rstctrl reset on PM runtime suspend, the drivers need to increase the usecount for the shared rstctrl reset that can be mapped also for the child device(s) or accessed via dev->parent.

Cc Adam Ford <[email protected]>
Cc Filip Matijević <[email protected]>
Cc "H. Nikolaus Schaller" <[email protected]>
Cc Ivaylo Dimitrov <[email protected]>
Cc moaz korena <[email protected]>
Cc Merlijn Wajer <[email protected]>
Cc Paweł Chmiel <[email protected]>
Cc Philipp Rossak <[email protected]>
Cc Tomi Valkeinen <[email protected]>
---
 arch/arm/boot/dts/am4372.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm/boot/dts/am4372.dtsi +20 -0
@@ -384,6 +384,26 @@
 				pool;
 			};
 		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+		};
 	};
 };
 
Signature · 1 line
2.23.0