scan: Improve comment
PATCH 1/4 scan: Improve comment
--- src/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
src/scan.c +2 -2
@@ -297,8 +297,8 @@ static struct l_genl_msg *scan_build_cmd(struct scan_context *sc, ext_capa =wiphy_get_extended_capabilities (sc->wiphy,NL80211_IFTYPE_STATION );/* -* XXX: If adding IE's here ensure that ordering is not broken for -* probe requests (IEEE-2016 Table 9-33). +* If adding IE's here ensure that ordering is not broken for +* probe requests (IEEE Std 802.11-2016 Table 9-33). */ /* Order 9 - Extended Capabilities */ iov[iov_elems].iov_base = (void *) ext_capa;
Signature · 1 line
2.21.0
PATCH 2/4 scan: Fix bit checking for interworking
The checker function will later be changed to match the bit setter.
--- src/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
src/scan.c +1 -1
@@ -305,7 +305,7 @@ static struct l_genl_msg *scan_build_cmd(struct scan_context *sc, iov[iov_elems].iov_len = ext_capa[1 ] +2 ; iov_elems++; -if (util_is_bit_set (ext_capa[3 ],7 )) { +if (util_is_bit_set (ext_capa[2 +3 ],7 )) {/* Order 12 - Interworking */ interworking[0 ] =IE_TYPE_INTERWORKING ; interworking[1 ] =1 ;
Signature · 1 line
2.21.0
PATCH 3/4 scan: Separate IE attr creation into logical block
In reply to Tim KourtThis also introduces the max IE lenght check and exludes the addition of IEs for the drivers that don't support it.
--- src/scan.c | 51 ++++++++++++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 21 deletions(-)
src/scan.c +30 -21
@@ -266,34 +266,15 @@ static void scan_build_attr_scan_frequencies(struct l_genl_msg *msg,l_genl_msg_leave_nested (msg); } -static bool scan_mac_address_randomization_is_disabled (void ) -{ -const struct l_settings *config =iwd_get_config (); -bool disabled; - -if (!l_settings_get_bool (config,"Scan" , -"DisableMacAddressRandomization" , - &disabled)) -return false; - -return disabled; -} - -static struct l_genl_msg *scan_build_cmd (struct scan_context *sc, -bool ignore_flush_flag,bool is_passive, +static void scan_build_attr_ie (struct l_genl_msg *msg, +struct scan_context *sc,const struct scan_parameters *params) { -struct l_genl_msg *msg; -uint32_t flags =0 ;struct iovec iov[3 ];unsigned int iov_elems =0 ;const uint8_t *ext_capa;uint8_t interworking[3 ]; - msg =l_genl_msg_new (NL80211_CMD_TRIGGER_SCAN ); - -l_genl_msg_append_attr (msg,NL80211_ATTR_WDEV ,8 , &sc->wdev_id); - ext_capa =wiphy_get_extended_capabilities (sc->wiphy,NL80211_IFTYPE_STATION );/*
@@ -325,6 +306,34 @@ static struct l_genl_msg *scan_build_cmd(struct scan_context *sc, }l_genl_msg_append_attrv (msg,NL80211_ATTR_IE , iov, iov_elems); +} + +static bool scan_mac_address_randomization_is_disabled (void ) +{ +const struct l_settings *config =iwd_get_config (); +bool disabled; + +if (!l_settings_get_bool (config,"Scan" , +"DisableMacAddressRandomization" , + &disabled)) +return false; + +return disabled; +} + +static struct l_genl_msg *scan_build_cmd (struct scan_context *sc, +bool ignore_flush_flag,bool is_passive, +const struct scan_parameters *params) +{ +struct l_genl_msg *msg; +uint32_t flags =0 ; + + msg =l_genl_msg_new (NL80211_CMD_TRIGGER_SCAN ); + +l_genl_msg_append_attr (msg,NL80211_ATTR_WDEV ,8 , &sc->wdev_id); + +if (wiphy_get_max_scan_ie_len (sc->wiphy)) +scan_build_attr_ie (msg, sc, params);if (params->freqs)scan_build_attr_scan_frequencies (msg, params->freqs);
Signature · 1 line
2.21.0
PATCH 4/4 scan: Separate cck rates attr creation into logical block
In reply to Tim Kourt--- src/scan.c | 82 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 42 insertions(+), 40 deletions(-)
src/scan.c +42 -40
@@ -308,6 +308,45 @@ static void scan_build_attr_ie(struct l_genl_msg *msg,l_genl_msg_append_attrv (msg,NL80211_ATTR_IE , iov, iov_elems); } +static void scan_build_attr_tx_no_cck_rates (struct l_genl_msg *msg, +struct scan_context *sc) +{ +static const uint8_t b_rates[] = {2 ,4 ,11 ,22 }; +uint8_t *scan_rates; +const uint8_t *supported; +unsigned int num_supported; +unsigned int count; +unsigned int i; + +l_genl_msg_append_attr (msg,NL80211_ATTR_TX_NO_CCK_RATE ,0 ,NULL ); + +/* +* Assume if we're sending the probe requests at OFDM bit +* rates we don't want to advertise support for 802.11b rates. +*/ +if (L_WARN_ON (!(supported =wiphy_get_supported_rates (sc->wiphy, +NL80211_BAND_2GHZ , + &num_supported)))) +return ; + + scan_rates =l_malloc (num_supported); + +for (count =0 , i =0 ; i < num_supported; i++) +if (!memchr (b_rates, supported[i],L_ARRAY_SIZE (b_rates))) + scan_rates[count++] = supported[i]; + +if (L_WARN_ON (!count)) { +l_free (scan_rates); +return ; + } + +l_genl_msg_enter_nested (msg,NL80211_ATTR_SCAN_SUPP_RATES ); +l_genl_msg_append_attr (msg,NL80211_BAND_2GHZ , count, scan_rates); +l_genl_msg_leave_nested (msg); + +l_free (scan_rates); +} +static bool scan_mac_address_randomization_is_disabled (void ) {const struct l_settings *config =iwd_get_config ();
@@ -338,6 +377,9 @@ static struct l_genl_msg *scan_build_cmd(struct scan_context *sc,if (params->freqs)scan_build_attr_scan_frequencies (msg, params->freqs); +if (params->no_cck_rates) +scan_build_attr_tx_no_cck_rates (msg, sc); +if (params->flush && !ignore_flush_flag) flags |=NL80211_SCAN_FLAG_FLUSH ;
@@ -357,46 +399,6 @@ static struct l_genl_msg *scan_build_cmd(struct scan_context *sc,if (flags)l_genl_msg_append_attr (msg,NL80211_ATTR_SCAN_FLAGS ,4 , &flags); -if (params->no_cck_rates) { -static const uint8_t b_rates[] = {2 ,4 ,11 ,22 }; -uint8_t *scan_rates; -const uint8_t *supported; -unsigned int num_supported; -unsigned int count; -unsigned int i; - -l_genl_msg_append_attr (msg,NL80211_ATTR_TX_NO_CCK_RATE ,0 , -NULL ); - -/* -* Assume if we're sending the probe requests at OFDM bit -* rates we don't want to advertise support for 802.11b rates. -*/ -if (L_WARN_ON (!(supported =wiphy_get_supported_rates (sc->wiphy, -NL80211_BAND_2GHZ , - &num_supported)))) - goto done; - - scan_rates =l_malloc (num_supported); - -for (count =0 , i =0 ; i < num_supported; i++) -if (!memchr (b_rates, supported[i], -L_ARRAY_SIZE (b_rates))) - scan_rates[count++] = supported[i]; - -if (L_WARN_ON (!count)) { -l_free (scan_rates); - goto done; - } - -l_genl_msg_enter_nested (msg,NL80211_ATTR_SCAN_SUPP_RATES ); -l_genl_msg_append_attr (msg,NL80211_BAND_2GHZ , - count, scan_rates); -l_genl_msg_leave_nested (msg); -l_free (scan_rates); - } - -done:return msg; }
Signature · 1 line
2.21.0
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
Hi Tim,
Quoted 22 lines
---
src/scan.c| 82 ++++++++++++++++++++++++++++--------------------------1 file changed, 42 insertions(+), 40 deletions(-)src/scan.c +10
-0@@ -308,6 +308,45 @@ static void scan_build_attr_ie(struct l_genl_msg *msg,l_genl_msg_append_attrv (msg,NL80211_ATTR_IE , iov, iov_elems); } +static void scan_build_attr_tx_no_cck_rates (struct l_genl_msg *msg, +struct scan_context *sc) +{ +static const uint8_t b_rates[] = {2 ,4 ,11 ,22 }; +uint8_t *scan_rates; +const uint8_t *supported; +unsigned int num_supported; +unsigned int count; +unsigned int i; +
src/scan.c static void scan_build_attr_ie(struct l_genl_msg *msg, · line 330
Quoted 10 lines
src/scan.c +10
-0+l_genl_msg_append_attr (msg,NL80211_ATTR_TX_NO_CCK_RATE ,0 ,NULL ); + +/* +* Assume if we're sending the probe requests at OFDM bit +* rates we don't want to advertise support for 802.11b rates. +*/ +if (L_WARN_ON (!(supported =wiphy_get_supported_rates (sc->wiphy, +NL80211_BAND_2GHZ , + &num_supported)))) +return ;
these kind of “nested” statements become really hard to read and check if they are correct.
supported = wiphy_get_supported_rates(sc->wiphy, ..); if (L_WARN_ON(!supported)) return;
I realize that this code is the same as below, but lets improve readability as well. It is fine to submit a cleanup patch to improve readability if we find such places.
Regards
Marcel
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
Hi Marcel,
Quoted 7 lines
src/scan.c static void scan_build_attr_ie(struct l_genl_msg *msg, · line 330
Quoted 4 lines
src/scan.c +4
-0+if (L_WARN_ON (!(supported =wiphy_get_supported_rates (sc->wiphy, +NL80211_BAND_2GHZ , + &num_supported)))) +return ;these kind of “nested” statements become really hard to read and check if they are correct.
Quoted 5 lines
supported = wiphy_get_supported_rates(sc->wiphy, ..); if (L_WARN_ON(!supported)) return;I realize that this code is the same as below, but lets improve readability as well. It is fine to submit a cleanup patch to improve readability if we find such places.
Actually, I explicitly requested that this be the way it is. For L_WARN_ON, I want the resultant warning to carry as much info as possible. Having a message like "Warning: !supported" show up is pretty pointless. Yes it carries the line number and filename, but it still requires an extra step. And things can change between different versions of iwd, etc.
So while the readability is a little worse, I think the hit is worth it for cases where L_WARN_ON is used.
Regards,
-Denis
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
Hi Denis,
Quoted 10 lines
Quoted 9 lines
src/scan.c static void scan_build_attr_ie(struct l_genl_msg *msg, · line 330
Quoted 4 lines
src/scan.c +4
-0+if (L_WARN_ON (!(supported =wiphy_get_supported_rates (sc->wiphy, +NL80211_BAND_2GHZ , + &num_supported)))) +return ;these kind of “nested” statements become really hard to read and check if they are correct.
supported = wiphy_get_supported_rates(sc->wiphy, ..); if (L_WARN_ON(!supported)) return;I realize that this code is the same as below, but lets improve readability as well. It is fine to submit a cleanup patch to improve readability if we find such places.
Quoted 3 lines
Actually, I explicitly requested that this be the way it is. For
L_WARN_ON, I want the resultant warning to carry as much info as possible. Having a message like "Warning: !supported" show up is pretty pointless. Yes it carries the line number and filename, but it still requires an extra step. And things can change between different versions of iwd, etc.So while the readability is a little worse, I think the hit is worth it for cases where
L_WARN_ONis used.
ok then, fair point. Can we somehow improve these cases with a comment to ease reading and understanding the code.
Regards
Marcel
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
Hi Marcel,
Quoted 2 lines
ok then, fair point. Can we somehow improve these cases with a comment to ease reading and understanding the code.
So something like:
+ * + * wiphy should have parsed the supported rates from the + * kernel / driver. If not, warn and give up
Or do you have something else in mind?
Regards,
-Denis
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
Quoted 14 lines · Denis Kenzior
Hi Marcel,
Quoted 1 line
ok then, fair point. Can we somehow improve these cases with a comment to ease reading and understanding the code.
So something like:
(quoted diff) +3
-0+ * + * wiphy should have parsed the supported rates from the + * kernel / driver. If not, warn and give up
Quoted 1 line
Or do you have something else in mind?
In addition I would also do
*
* Keep full statement in L_WARN_ON to include more context when
* the warning is triggered.
Just as a reminder for later days on why this is done. I am pretty sure otherwise I am going to stumble over it again and ask the same question.
Regards
Marcel
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
Hi Marcel,
Quoted 16 lines · Marcel Holtmann
Quoted 14 lines · Denis Kenzior
Hi Marcel,
Quoted 1 line
ok then, fair point. Can we somehow improve these cases with a comment to ease reading and understanding the code.
So something like:
(quoted diff) +3
-0+ * + * wiphy should have parsed the supported rates from the + * kernel / driver. If not, warn and give upQuoted 1 line
Or do you have something else in mind?
Quoted 8 lines
In addition I would also do
*
* Keep full statement inL_WARN_ONto include more context when
* the warning is triggered.Just as a reminder for later days on why this is done. I am pretty sure otherwise I am going to stumble over it again and ask the same question.
Right. We do have a dozen or so of these now and I think the use of L_WARN will only keep growing. Perhaps we should add another section to doc/coding-style.txt instead? Formalize / encourage this as an optional best practice going forward.
Regards,
-Denis
Re: [PATCH 4/4] scan: Separate cck rates attr creation into logical block
In reply to Tim KourtHi Tim,
Quoted 4 lines · Tim Kourt
--- src/scan.c | 82 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 42 insertions(+), 40 deletions(-)
<snip>
src/scan.c static void scan_build_attr_ie(struct l_genl_msg *msg, · line 312
Quoted 3 lines
src/scan.c +2
-0+static void scan_build_attr_tx_no_cck_rates (struct l_genl_msg *msg, +struct scan_context *sc)
Given that this appends 2 attributes, I think the naming is misleading.
Regards,
-Denis
Hi Tim,
Quoted 4 lines · Tim Kourt
--- src/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Patches 1-3 applied, thanks.
Regards,
-Denis