riscv: dts: Add hifive-unleashed-a00 dts from Linux
Subsystems (2)
PATCH v3 1/2 riscv: dts: Add hifive-unleashed-a00 dts from Linux
Sync the hifive-unleashed-a00 dts from Linux with
below commit details:
commit <2993c9b04e616df0848b655d7202a707a70fc876> ("riscv: dts: HiFive
Unleashed: add default chosen/stdout-path")
Idea is to periodically sync the dts from Linux instead of tweaking internal changes one after another, so better not add any intermediate changes in between. This would help to maintain the dts files easy and meaningful since we are reusing device tree files from Linux.
---
Changes for v3:
- none
arch/riscv/dts/Makefile | 1 + arch/riscv/dts/fu540-c000.dtsi | 251 ++++++++++++++++++++++++ arch/riscv/dts/hifive-unleashed-a00.dts | 96 +++++++++ 3 files changed, 348 insertions(+) create mode 100644 arch/riscv/dts/fu540-c000.dtsi create mode 100644 arch/riscv/dts/hifive-unleashed-a00.dts
arch/riscv/dts/Makefile +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb +dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb targets += $(dtb-y)
arch/riscv/dts/fu540-c000.dtsi new file +251 -0
251 lines not on this page · raw message
arch/riscv/dts/hifive-unleashed-a00.dts new file +96 -0
96 lines not on this page · raw message
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v3 2/2 sifive: fu540: Enable OF_SEPARATE
Use dts support from U-Boot via OF_SEPARATE instead of depending from opensbi.
This would help to make the necessary changes in drivers and device trees in U-Boot tree itself. This feature would also be helpful to not pass dtb during opensbi builds.
---
Changes for v3:
- fixed typo changes.
configs/sifive_fu540_defconfig | 3 ++- doc/board/sifive/fu540.rst | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)
configs/sifive_fu540_defconfig +2 -1
@@ -6,6 +6,7 @@ CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_MISC_INIT_R=y +CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y -CONFIG_OF_PRIOR_STAGE=y +CONFIG_OF_SEPARATE=y
doc/board/sifive/fu540.rst +1 -1
@@ -58,7 +58,7 @@ firmware. We need to compile OpenSBI with below command: .. code-block:: none - make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot.bin> FW_PAYLOAD_FDT_PATH=<path to hifive-unleashed-a00.dtb from Linux> + make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot-dtb.bin> (Note: Prefer hifive-unleashed-a00.dtb from Linux-5.3 or higher) (Note: Linux-5.2 is also fine but it does not have ethernet DT node)
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v3 2/2 sifive: fu540: Enable OF_SEPARATE
doc/board/sifive/fu540.rst firmware. We need to compile OpenSBI with below command: · line 64
Quoted 13 lines · Jagan Teki
doc/board/sifive/fu540.rst +1
-1@@ -58,7 +58,7 @@ firmware. We need to compile OpenSBI with below command: .. code-block:: none - make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot.bin> FW_PAYLOAD_FDT_PATH=<path to hifive-unleashed-a00.dtb from Linux> + make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot-dtb.bin> (Note: Prefer hifive-unleashed-a00.dtb from Linux-5.3 or higher) (Note: Linux-5.2 is also fine but it does not have ethernet DT node)
Are these notes now obsolete?
Andreas.
Signature · 3 lines
Andreas Schwab, SUSE Labs, schwab at suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different."