Skip to contentSkip to conversation

configs/beaglebone: fix boot hang and update kernel

PATCH New unixmania at gmail.com 2 participants 9 messages Nov 2, 2019 – Nov 9, 2019

lore
Share & tools
lore
#0 lore raw

cover configs/beaglebone: fix boot hang and update kernel

From: Carlos Santos <[email protected]>

- Update U-Boot environment to prevent boot hangs
- Update the kernel to the latest release from the official BeagleBoard and BeagleBone kernel repository

Carlos Santos (2):
board/beaglebone: fix boot on BeagleBone Black configs/beaglebone: use the new BeagleBoard/BeagleBone kernel
repository

 board/beaglebone/uEnv.txt    | 5 ++++-
 configs/beaglebone_defconfig | 4 ++--
 2 files changed, 6 insertions(+), 3 deletions(-)
Signature · 1 line
2.18.1
#1 lore raw

PATCH 1/2 board/beaglebone: fix boot on BeagleBone Black

From: Carlos Santos <[email protected]>

Commit 68b5b79b2f has set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.

Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the ancient U-Boot 2013.10-dirty default values that cause system hangs.

---
 board/beaglebone/uEnv.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
board/beaglebone/uEnv.txt +4 -1
index a665f20889..8fce54d87e 100644
@@ -3,6 +3,9 @@ devtype=mmc
 bootdir=
 bootfile=zImage
 bootpartition=mmcblk0p2
+console=ttyS0,115200n8
+loadaddr=0x82000000
+fdtaddr=0x88000000
 set_mmc1=if test $board_name = A33515BB; then setenv bootpartition mmcblk1p2; fi
-set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait
+set_bootargs=setenv bootargs console=${console} root=/dev/${bootpartition} rw rootfstype=ext4 rootwait
 uenvcmd=run set_mmc1; run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr}
Signature · 1 line
2.18.1
#2 lore raw

PATCH 1/2 board/beaglebone: fix boot on BeagleBone Black

Hello Carlos,

Quoted 7 lines · On Sat, 2 Nov 2019 19:38:38 -0300 unixmania at gmail.com wrote:

From: Carlos Santos <[email protected]>

Commit 68b5b79b2f has set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.

Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the ancient U-Boot 2013.10-dirty default values that cause system hangs.

Where are we using U-Boot 2013.10-dirty on BeagleBone ?

$ grep UBOOT_CUSTOM_VERSION_VALUE configs/beaglebone*
configs/beagleboneai_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.04"
configs/beaglebone_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07"
configs/beaglebone_qt5_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"

And these are upstream, unpatched, versions.

Could you clarify this? Otherwise the patch looks good, of course.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH 1/2 board/beaglebone: fix boot on BeagleBone Black

Quoted 25 lines · Thomas Petazzoni

Hello Carlos,

Quoted 7 lines · On Sat, 2 Nov 2019 19:38:38 -0300 unixmania at gmail.com wrote:

From: Carlos Santos <[email protected]>

Commit 68b5b79b2f has set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.

Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the ancient U-Boot 2013.10-dirty default values that cause system hangs.

Where are we using U-Boot 2013.10-dirty on BeagleBone ?

$ grep UBOOT_CUSTOM_VERSION_VALUE configs/beaglebone*
configs/beagleboneai_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.04"
configs/beaglebone_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07"
configs/beaglebone_qt5_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"

And these are upstream, unpatched, versions.

Could you clarify this? Otherwise the patch looks good, of course.

Quoted 7 lines

Thanks!

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

That's the SPL in old Beaglebone cards. I will rephrase the commit message to clarify it.

Signature · 1 line
Carlos Santos <[email protected]>
#4 lore raw

PATCH 1/2 board/beaglebone: fix boot on BeagleBone Black

Quoted 36 lines · Carlos Santos
Quoted 25 lines · Thomas Petazzoni

Hello Carlos,

Quoted 7 lines · On Sat, 2 Nov 2019 19:38:38 -0300 unixmania at gmail.com wrote:

From: Carlos Santos <[email protected]>

Commit 68b5b79b2f has set the getty port to the default console but left "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.

Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the ancient U-Boot 2013.10-dirty default values that cause system hangs.

Where are we using U-Boot 2013.10-dirty on BeagleBone ?

$ grep UBOOT_CUSTOM_VERSION_VALUE configs/beaglebone*
configs/beagleboneai_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.04"
configs/beaglebone_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07"
configs/beaglebone_qt5_defconfig:BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"

And these are upstream, unpatched, versions.

Could you clarify this? Otherwise the patch looks good, of course.

Quoted 7 lines

Thanks!

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Quoted 5 lines

That's the SPL in old Beaglebone cards. I will rephrase the commit message to clarify it.

--
Carlos Santos <[email protected]>

Done: https://patchwork.ozlabs.org/patch/1192449/

Signature · 1 line
Carlos Santos <[email protected]>
#5 lore raw

PATCH 2/2 configs/beaglebone: use the new BeagleBoard/BeagleBone kernel repository

In reply to unixmania at gmail.com

From: Carlos Santos <[email protected]>

The original source URL (http://beagleboard.org/source) now redirects to
https://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image
which points to an official kernel repository at GitHub.

There are updated RT and non-RT kernel source trees. Use the last non-RT release (4.19.73-ti-r29) and the omap2plus defconfig.

---
 configs/beaglebone_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
configs/beaglebone_defconfig +2 -2
index ee97f80322..2de1bd0b32 100644
@@ -7,8 +7,8 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglebone/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/processor-sdk/processor-sdk-linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4dae378bbe721277b08699d1d88ffae12acc9b09"
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/beagleboard/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.19.73-ti-r29"
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue"
Signature · 1 line
2.18.1
#6 lore raw

PATCH 2/2 configs/beaglebone: use the new BeagleBoard/BeagleBone kernel repository

Hello,

+Peter, who contributed the beagleboneai defconfig.

Quoted 10 lines · On Sat, 2 Nov 2019 19:38:39 -0300 unixmania at gmail.com wrote:

From: Carlos Santos <[email protected]>

The original source URL (http://beagleboard.org/source) now redirects to
https://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image
which points to an official kernel repository at GitHub.

There are updated RT and non-RT kernel source trees. Use the last non-RT release (4.19.73-ti-r29) and the omap2plus defconfig.

I've applied to next... but after doing, I realized that you could have used the github macro, like we do in beagleboneai_defconfig. Could you send a patch for that ?

Also, it would be nice if we could align beagleboneai, beaglebone and beaglebone_qt5 to use the same U-Boot/Linux versions, if possible. I see that the beagleboneai is using 4.14 even though it's a much newer platform than beaglebone.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#7 lore raw

PATCH 2/2 configs/beaglebone: use the new BeagleBoard/BeagleBone kernel repository

Quoted 14 lines · Thomas Petazzoni

Hello,

+Peter, who contributed the beagleboneai defconfig.

Quoted 6 lines · On Sat, 2 Nov 2019 19:38:39 -0300 unixmania at gmail.com wrote:

From: Carlos Santos <[email protected]>

The original source URL (http://beagleboard.org/source) now redirects to
https://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image
which points to an official kernel repository at GitHub.

Quoted 8 lines
Quoted 4 lines

There are updated RT and non-RT kernel source trees. Use the last non-RT release (4.19.73-ti-r29) and the omap2plus defconfig.

I've applied to next... but after doing, I realized that you could have used the github macro, like we do in beagleboneai_defconfig. Could you send a patch for that ?

I kept using git download method but I can replace it by the download or the tarbal from GitHub.

Quoted 4 lines

Also, it would be nice if we could align beagleboneai, beaglebone and beaglebone_qt5 to use the same U-Boot/Linux versions, if possible. I see that the beagleboneai is using 4.14 even though it's a much newer platform than beaglebone.

I have been working on it but did not have much free time in the last weeks. I will try to fix it on time for 2019.11.

Signature · 1 line
Carlos Santos <[email protected]>
#8 lore raw

PATCH 2/2 configs/beaglebone: use the new BeagleBoard/BeagleBone kernel repository

Quoted 6 lines · On Fri, 8 Nov 2019 20:11:14 -0300 Carlos Santos <[email protected]> wrote:
Quoted 3 lines

I've applied to next... but after doing, I realized that you could have used the github macro, like we do in beagleboneai_defconfig. Could you send a patch for that ?

I kept using git download method but I can replace it by the download or the tarbal from GitHub.

Yes, it's nicer to use the github macro, it saves a lot of download time.

Quoted 7 lines
Quoted 4 lines

Also, it would be nice if we could align beagleboneai, beaglebone and beaglebone_qt5 to use the same U-Boot/Linux versions, if possible. I see that the beagleboneai is using 4.14 even though it's a much newer platform than beaglebone.

I have been working on it but did not have much free time in the last weeks. I will try to fix it on time for 2019.11.

Sure, no problem. That was really a "nice to have" comment. Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com