Skip to contentSkip to conversation

btrfs-progs: Reduce error level from error to warning for OPEN_CTREE_PARTIAL

PATCH In review Qu Wenruo 2 participants 3 messages Nov 11, 2019 – Nov 15, 2019 Btrfs file system

lore
Share & tools
lore

Qu Wenruo

author
#0 lore raw

PATCH 1/2 btrfs-progs: Reduce error level from error to warning for OPEN_CTREE_PARTIAL

Even if we're using OPEN_CTREE_PARTIAL, like "rescue zero log", the error message still looks too serious even we skipped that tree:

    bad tree block 2172747776, bytenr mismatch, want=2172747776, have=0
    Couldn't setup extent tree
    ^^^^^^^^^^^^^^^^^^^^^^^^^^

This patch will change the error message to:
- Use error() if we're not using OPEN_CTREE_PARTIAL
- Use warning() and explicitly show we're skipping that tree

So the result would be something like:

For non-OPEN_CTREE_PARTIAL case:
bad tree block 2172747776, bytenr mismatch, want=2172747776, have=0
ERROR: could not setup extent tree

For OPEN_CTREE_PARTIAL case
bad tree block 2172747776, bytenr mismatch, want=2172747776, have=0
WARNING: could not setup extent tree, skipping it

---
 disk-io.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
disk-io.c +4 -2
index 42f0026a6d2f..bdf63eee9bd9 100644
@@ -886,9 +886,11 @@ static int setup_root_or_create_block(struct btrfs_fs_info *fs_info,
 
 	ret = find_and_setup_root(root, fs_info, objectid, info_root);
 	if (ret) {
-		printk("Couldn't setup %s tree\n", str);
-		if (!(flags & OPEN_CTREE_PARTIAL))
+		if (!(flags & OPEN_CTREE_PARTIAL)) {
+			error("could not setup %s tree", str);
 			return -EIO;
+		}
+		warning("could not setup %s tree, skipping it", str);
 		/*
 		 * Need a blank node here just so we don't screw up in the
 		 * million of places that assume a root has a valid ->node
Signature · 1 line
2.24.0
author
#1 lore raw

PATCH 2/2 btrfs: rescue/zero-log: Manually write all supers to handle extent tree error more gracefully

[BUG]
Even "btrfs rescue zero-log" only reset btrfs_super_block::log_root and btrfs_super_block::log_root_level, we still use trasction to write all super blocks for all devices.

This means we can't handle things like corrupted extent tree:

checksum verify failed on 2172747776 found 000000B6 wanted 00000000 checksum verify failed on 2172747776 found 000000B6 wanted 00000000 bad tree block 2172747776, bytenr mismatch, want=2172747776, have=0
WARNING: could not setup extent tree, skipping it Clearing log on /dev/nvme/btrfs, previous log_root 0, level 0
ERROR: Corrupted fs, no valid METADATA block group found
ERROR: attempt to start transaction over already running one

[CAUSE]
Because we have extra check in transaction code to ensure we have valid METADATA block groups.

In fact we don't really need transaction at all.

[FIX]
Instead of commit transaction, we can just call write_all_supers() manually, so we can still handle multi-device fs while avoid above error.

Also, add OPEN_CTREE_NO_BLOCK_GROUPS open ctree flag to make it more robust.

---
 cmds/rescue.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
cmds/rescue.c +7 -6
index e8eab6808bc3..087c33befeff 100644
@@ -165,7 +165,6 @@ static int cmd_rescue_zero_log(const struct cmd_struct *cmd,
 			       int argc, char **argv)
 {
 	struct btrfs_root *root;
-	struct btrfs_trans_handle *trans;
 	struct btrfs_super_block *sb;
 	char *devname;
 	int ret;
@@ -187,7 +186,8 @@ static int cmd_rescue_zero_log(const struct cmd_struct *cmd,
 		goto out;
 	}
 
-	root = open_ctree(devname, 0, OPEN_CTREE_WRITES | OPEN_CTREE_PARTIAL);
+	root = open_ctree(devname, 0, OPEN_CTREE_WRITES | OPEN_CTREE_PARTIAL |
+			  OPEN_CTREE_NO_BLOCK_GROUPS);
 	if (!root) {
 		error("could not open ctree");
 		return 1;
@@ -198,13 +198,14 @@ static int cmd_rescue_zero_log(const struct cmd_struct *cmd,
 			devname,
 			(unsigned long long)btrfs_super_log_root(sb),
 			(unsigned)btrfs_super_log_root_level(sb));
-	trans = btrfs_start_transaction(root, 1);
-	BUG_ON(IS_ERR(trans));
 	btrfs_set_super_log_root(sb, 0);
 	btrfs_set_super_log_root_level(sb, 0);
-	btrfs_commit_transaction(trans, root);
+	ret = write_all_supers(root->fs_info);
+	if (ret < 0) {
+		errno = -ret;
+		error("failed to write dev supers: %m");
+	}
 	close_ctree(root);
-
 out:
 	return !!ret;
 }
Signature · 1 line
2.24.0
#2 lore raw

Re: [PATCH 2/2] btrfs: rescue/zero-log: Manually write all supers to handle extent tree error more gracefully

Quoted 26 lines · Qu Wenruo

[BUG]
Even "btrfs rescue zero-log" only reset btrfs_super_block::log_root and btrfs_super_block::log_root_level, we still use trasction to write all super blocks for all devices.

This means we can't handle things like corrupted extent tree:

checksum verify failed on 2172747776 found 000000B6 wanted 00000000 checksum verify failed on 2172747776 found 000000B6 wanted 00000000 bad tree block 2172747776, bytenr mismatch, want=2172747776, have=0
WARNING: could not setup extent tree, skipping it Clearing log on /dev/nvme/btrfs, previous log_root 0, level 0
ERROR: Corrupted fs, no valid METADATA block group found
ERROR: attempt to start transaction over already running one

[CAUSE]
Because we have extra check in transaction code to ensure we have valid METADATA block groups.

In fact we don't really need transaction at all.

[FIX]
Instead of commit transaction, we can just call write_all_supers() manually, so we can still handle multi-device fs while avoid above error.

Quoted 5 lines

Also, add OPEN_CTREE_NO_BLOCK_GROUPS open ctree flag to make it more robust.

Thanks, v1 has been replaced.