thermal: ti-bandgap: Fix adc value datatype
PATCH 1/1 thermal: ti-bandgap: Fix adc value datatype
The CORE_TEMP_SENSOR_MPU register gives a raw adc value which needs to be indexed into a lookup table to get the actual temperature. Fix the naming and datatype of the adc value variable.
Signed-off-by Faiz Abbas <[email protected]>
--- drivers/thermal/ti-bandgap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/thermal/ti-bandgap.c +3 -3
@@ -26,7 +26,7 @@struct ti_bandgap {ulong base; -int temperature;/* in mili degree celsius */ +uint adc_val; };/*
@@ -162,8 +162,8 @@ static int ti_bandgap_get_temp(struct udevice *dev, int *temp) {struct ti_bandgap *bgp =dev_get_priv (dev); - bgp->temperature =0x3ff &readl (bgp->base +CTRL_CORE_TEMP_SENSOR_MPU ); - *temp = dra752_adc_to_temp[bgp->temperature -DRA752_ADC_START_VALUE ]; + bgp->adc_val =0x3ff &readl (bgp->base +CTRL_CORE_TEMP_SENSOR_MPU ); + *temp = dra752_adc_to_temp[bgp->adc_val -DRA752_ADC_START_VALUE ];return 0 ; }
Signature · 1 line
2.19.2
PATCH 1/1 thermal: ti-bandgap: Fix adc value datatype
Quoted 5 lines · Faiz Abbas
The
CORE_TEMP_SENSOR_MPUregister gives a raw adc value which needs to be indexed into a lookup table to get the actual temperature. Fix the naming and datatype of the adc value variable.Signed-off-by Faiz Abbas <[email protected]>
Merged into u-boot-ti.
Thanks and regards,
Lokesh