configs/microchip: addition of the sama5d27 wlsom1 ek board
PATCH 1/1 configs/microchip: addition of the sama5d27 wlsom1 ek board
From: Eugen Hristev <[email protected]>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2 components.
--- .../atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg | 31 +++++++ ...ochip_sama5d27_wlsom1_ek_mmc_dev_defconfig | 87 +++++++++++++++++++ 2 files changed, 118 insertions(+) create mode 100644 board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg create mode 100644 configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig
board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg new file +31 -0
@@ -0,0 +1,31 @@ +# Image for SD card boot on Microchip SAMA5D27 WLSOM1 EK +# +image boot.vfat { + vfat { + files = { + "zImage", + "at91-sama5d27_wlsom1_ek.dtb", + "boot.bin", + "u-boot.bin" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 1M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +}
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig new file +87 -0
87 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 1/1 configs/microchip: addition of the sama5d27 wlsom1 ek board
Hello Eugen,
Quoted 8 lines · On Mon, 11 Nov 2019 09:17:14 +0000 <[email protected]> wrote:
From: Eugen Hristev <[email protected]>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2 components.
Signed-off-by Eugen Hristev <[email protected]>--- .../atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg | 31 +++++++ ...ochip_sama5d27_wlsom1_ek_mmc_dev_defconfig | 87 +++++++++++++++++++
Thanks for your contribution. However, we really want a minimal defconfig next to the "dev" defconfig that you are contributing.
In addition, a new defconfig needs:
- A readme.txt file in board/atmel/ that explains how to use the defconfig on the actual HW.
- An update to the DEVELOPERS file to reference the newly added defconfig and board files.
Quoted 4 lines
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig new file +4
-0+BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_6.2)/linux-linux4sam_6.2.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="sama5"
[...]
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig line 75
Quoted 2 lines
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig new file +2
-0+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
You can use a custom tarball like for the kernel above.
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig line 81
Quoted 6 lines
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig new file +6
-0+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.9.0" +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_wlsom1_eksd_uboot" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
Same here.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com