Skip to contentSkip to conversation

Optimize perf stat for large number of events/cpus

PATCH Superseded Andi Kleen 3 participants 18 messages Nov 12, 2019 – Nov 15, 2019 perf events

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

[v6: Address review feedback. Merge one patch again to avoid broken immediate state.]

This patch kit optimizes perf stat for a large number of events on systems with many CPUs and PMUs.

Some profiling shows that the most overhead is doing IPIs to all the target CPUs. We can optimize this by using sched_setaffinity to set the affinity to a target CPU once and then doing the perf operation for all events on that CPU. This requires some restructuring, but cuts the set up time quite a bit.

In theory we could go further by parallelizing these setups too, but that would be much more complicated and for now just batching it per CPU seems to be sufficient. At some point with many more cores parallelization or a better bulk perf setup API might be needed though.

In addition perf does a lot of redundant /sys accesses with many PMUs, which can be also expensve. This is also optimized.

On a large test case (>700 events with many weak groups) on a 94 CPU system I go from

real 0m8.607s
user 0m0.550s
sys 0m8.041s

to

real 0m3.269s
user 0m0.760s
sys 0m1.694s

so shaving ~6 seconds of system time, at slightly more cost in perf stat itself. On a 4 socket system with the savings are more dramatic:

real 0m15.641s
user 0m0.873s
sys 0m14.729s

to

real 0m4.493s
user 0m1.578s
sys 0m2.444s

so 11s difference in the user visible set up time.

Also available in

git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc perf/stat-scale-9

v1: Initial post.
v2: Rebase. Fix some minor issues.
v3: Rebase. Address review feedback. Fix one minor issue
v4: Modified based on review feedback. Now it maintains all_cpus per evlist. There is still a need for cpu_index iteration to get the correct index for indexing the file descriptors. Fix bug with unsorted cpu maps, now they are always sorted. Some cleanups and refactoring.
v5: Split patches. Redo loop iteration again. Fix cpu map merging for uncore. Remove duplicates from cpumaps. Add unit tests.
v6: Address review feedback. Fix some bugs. Add more comments. Merge one invalid patch split.

-Andi

author
#1 lore raw

PATCH v6 1/12 perf pmu: Use file system cache to optimize sysfs access

From: Andi Kleen <[email protected]>

pmu.c does a lot of redundant /sys accesses while parsing aliases and probing for PMUs. On large systems with a lot of PMUs this can get expensive (>2s):

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------

 27.25    1.227847           8    160888     16976 openat
 26.42    1.190481           7    164224    164077 stat

Add a cache to remember if specific file names exist or don't exist, which eliminates most of this overhead.

Also optimize some stat() calls to be slightly cheaper access()

Resulting in:

  0.18    0.004166           2      1851       305 open
  0.08    0.001970           2       829       622 access

---

v2: Use single lookup function as API (Jiri)

---
 tools/perf/util/Build     |  1 +
 tools/perf/util/fncache.c | 63 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/fncache.h |  7 +++++
 tools/perf/util/pmu.c     | 34 +++++++--------------
 tools/perf/util/srccode.c |  9 +-----
 5 files changed, 83 insertions(+), 31 deletions(-)
 create mode 100644 tools/perf/util/fncache.c
 create mode 100644 tools/perf/util/fncache.h
tools/perf/util/Build +1 -0
index 39814b1806a6..2c1504fe924c 100644
@@ -48,6 +48,7 @@ perf-y += header.o
 perf-y += callchain.o
 perf-y += values.o
 perf-y += debug.o
+perf-y += fncache.o
 perf-y += machine.o
 perf-y += map.o
 perf-y += pstack.o
tools/perf/util/fncache.c new file +63 -0

63 lines not on this page · raw message

tools/perf/util/fncache.h new file +7 -0
new file mode 100644
index 000000000000..fe020beaefb1
@@ -0,0 +1,7 @@
+#ifndef _FCACHE_H
+#define _FCACHE_H 1
+
+unsigned shash(const unsigned char *s);
+bool file_available(const char *name);
+
+#endif
tools/perf/util/pmu.c +11 -23
index adbe97e941dd..81357cc3d59a 100644
@@ -24,6 +24,7 @@
 #include "pmu-events/pmu-events.h"
 #include "string2.h"
 #include "strbuf.h"
+#include "fncache.h"
 
 struct perf_pmu_format {
 	char *name;
@@ -82,7 +83,6 @@ int perf_pmu__format_parse(char *dir, struct list_head *head)
  */
 static int pmu_format(const char *name, struct list_head *format)
 {
-	struct stat st;
 	char path[PATH_MAX];
 	const char *sysfs = sysfs__mountpoint();
 
@@ -92,8 +92,8 @@ static int pmu_format(const char *name, struct list_head *format)
 	snprintf(path, PATH_MAX,
 		 "%s" EVENT_SOURCE_DEVICE_PATH "%s/format", sysfs, name);
 
-	if (stat(path, &st) < 0)
-		return 0;	/* no error if format does not exist */
+	if (!file_available(path))
+		return 0;
 
 	if (perf_pmu__format_parse(path, format))
 		return -1;
@@ -475,7 +475,6 @@ static int pmu_aliases_parse(char *dir, struct list_head *head)
  */
 static int pmu_aliases(const char *name, struct list_head *head)
 {
-	struct stat st;
 	char path[PATH_MAX];
 	const char *sysfs = sysfs__mountpoint();
 
@@ -485,8 +484,8 @@ static int pmu_aliases(const char *name, struct list_head *head)
 	snprintf(path, PATH_MAX,
 		 "%s/bus/event_source/devices/%s/events", sysfs, name);
 
-	if (stat(path, &st) < 0)
-		return 0;	 /* no error if 'events' does not exist */
+	if (!file_available(path))
+		return 0;
 
 	if (pmu_aliases_parse(path, head))
 		return -1;
@@ -525,7 +524,6 @@ static int pmu_alias_terms(struct perf_pmu_alias *alias,
  */
 static int pmu_type(const char *name, __u32 *type)
 {
-	struct stat st;
 	char path[PATH_MAX];
 	FILE *file;
 	int ret = 0;
@@ -537,7 +535,7 @@ static int pmu_type(const char *name, __u32 *type)
 	snprintf(path, PATH_MAX,
 		 "%s" EVENT_SOURCE_DEVICE_PATH "%s/type", sysfs, name);
 
-	if (stat(path, &st) < 0)
+	if (access(path, R_OK) < 0)
 		return -1;
 
 	file = fopen(path, "r");
@@ -628,14 +626,11 @@ static struct perf_cpu_map *pmu_cpumask(const char *name)
 static bool pmu_is_uncore(const char *name)
 {
 	char path[PATH_MAX];
-	struct perf_cpu_map *cpus;
-	const char *sysfs = sysfs__mountpoint();
+	const char *sysfs;
 
+	sysfs = sysfs__mountpoint();
 	snprintf(path, PATH_MAX, CPUS_TEMPLATE_UNCORE, sysfs, name);
-	cpus = __pmu_cpumask(path);
-	perf_cpu_map__put(cpus);
-
-	return !!cpus;
+	return file_available(path);
 }
 
 /*
@@ -645,7 +640,6 @@ static bool pmu_is_uncore(const char *name)
  */
 static int is_arm_pmu_core(const char *name)
 {
-	struct stat st;
 	char path[PATH_MAX];
 	const char *sysfs = sysfs__mountpoint();
 
@@ -655,10 +649,7 @@ static int is_arm_pmu_core(const char *name)
 	/* Look for cpu sysfs (specific to arm) */
 	scnprintf(path, PATH_MAX, "%s/bus/event_source/devices/%s/cpus",
 				sysfs, name);
-	if (stat(path, &st) == 0)
-		return 1;
-
-	return 0;
+	return file_available(path);
 }
 
 static char *perf_pmu__getcpuid(struct perf_pmu *pmu)
@@ -1528,7 +1519,6 @@ bool pmu_have_event(const char *pname, const char *name)
 
 static FILE *perf_pmu__open_file(struct perf_pmu *pmu, const char *name)
 {
-	struct stat st;
 	char path[PATH_MAX];
 	const char *sysfs;
 
@@ -1538,10 +1528,8 @@ static FILE *perf_pmu__open_file(struct perf_pmu *pmu, const char *name)
 
 	snprintf(path, PATH_MAX,
 		 "%s" EVENT_SOURCE_DEVICE_PATH "%s/%s", sysfs, pmu->name, name);
-
-	if (stat(path, &st) < 0)
+	if (!file_available(path))
 		return NULL;
-
 	return fopen(path, "r");
 }
 
tools/perf/util/srccode.c +1 -8
index d84ed8b6caaa..c29edaaca863 100644
@@ -16,6 +16,7 @@
 #include "srccode.h"
 #include "debug.h"
 #include <internal/lib.h> // page_size
+#include "fncache.h"
 
 #define MAXSRCCACHE (32*1024*1024)
 #define MAXSRCFILES     64
@@ -36,14 +37,6 @@ static LIST_HEAD(srcfile_list);
 static long map_total_sz;
 static int num_srcfiles;
 
-static unsigned shash(unsigned char *s)
-{
-	unsigned h = 0;
-	while (*s)
-		h = 65599 * h + *s++;
-	return h ^ (h >> 16);
-}
-
 static int countlines(char *map, int maplen)
 {
 	int numl;
Signature · 1 line
2.23.0
author
#2 lore raw

PATCH v6 2/12 perf affinity: Add infrastructure to save/restore affinity

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

The kernel perf subsystem has to IPI to the target CPU for many operations. On systems with many CPUs and when managing many events the overhead can be dominated by lots of IPIs.

An alternative is to set up CPU affinity in the perf tool, then set up all the events for that CPU, and then move on to the next CPU.

Add some affinity management infrastructure to enable such a model. Used in followon patches.

---

v2: Use linux/bitmap.h functions.

---
 tools/perf/util/Build      |  1 +
 tools/perf/util/affinity.c | 72 ++++++++++++++++++++++++++++++++++++++
 tools/perf/util/affinity.h | 15 ++++++++
 3 files changed, 88 insertions(+)
 create mode 100644 tools/perf/util/affinity.c
 create mode 100644 tools/perf/util/affinity.h
tools/perf/util/Build +1 -0
index 2c1504fe924c..c7d4eab017e5 100644
@@ -76,6 +76,7 @@ perf-y += sort.o
 perf-y += hist.o
 perf-y += util.o
 perf-y += cpumap.o
+perf-y += affinity.o
 perf-y += cputopo.o
 perf-y += cgroup.o
 perf-y += target.o
tools/perf/util/affinity.c new file +72 -0

72 lines not on this page · raw message

tools/perf/util/affinity.h new file +15 -0
new file mode 100644
index 000000000000..008e2c3995b9
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef AFFINITY_H
+#define AFFINITY_H 1
+
+struct affinity {
+	unsigned long *orig_cpus;
+	unsigned long *sched_cpus;
+	bool changed;
+};
+
+void affinity__cleanup(struct affinity *a);
+void affinity__set(struct affinity *a, int cpu);
+int affinity__setup(struct affinity *a);
+
+#endif
Signature · 1 line
2.23.0
author
#3 lore raw

PATCH v6 3/12 perf cpumap: Maintain cpumaps ordered and without dups

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Enforce this in _trim()

Needed for followon change.

---
 tools/perf/lib/cpumap.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
tools/perf/lib/cpumap.c +15 -1
index 2ca1fafa620d..d81656b4635e 100644
@@ -68,14 +68,28 @@ static struct perf_cpu_map *cpu_map__default_new(void)
 	return cpus;
 }
 
+static int cmp_int(const void *a, const void *b)
+{
+	return *(const int *)a - *(const int*)b;
+}
+
 static struct perf_cpu_map *cpu_map__trim_new(int nr_cpus, int *tmp_cpus)
 {
 	size_t payload_size = nr_cpus * sizeof(int);
 	struct perf_cpu_map *cpus = malloc(sizeof(*cpus) + payload_size);
+	int i, j;
 
 	if (cpus != NULL) {
-		cpus->nr = nr_cpus;
 		memcpy(cpus->map, tmp_cpus, payload_size);
+		qsort(cpus->map, nr_cpus, sizeof(int), cmp_int);
+		/* Remove dups */
+		j = 0;
+		for (i = 0; i < nr_cpus; i++) {
+			if (i == 0 || cpus->map[i] != cpus->map[i - 1])
+				cpus->map[j++] = cpus->map[i];
+		}
+		cpus->nr = j;
+		assert(j <= nr_cpus);
 		refcount_set(&cpus->refcnt, 1);
 	}
 
Signature · 1 line
2.23.0
author
#4 lore raw

PATCH v6 4/12 perf evlist: Maintain evlist->all_cpus

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Maintain a cpumap in the evlist that is the union of all the cpus of the events.

This needs a cpumap merge operation, which is added together with tests.

v2:
Add tests for cpu map merge
Fix handling of duplicates
Rename _update to _merge
Factor out sorting.
Fix handling of NULL maps in merge
v3:
Add comments and empty lines to _merge

---
 tools/perf/lib/cpumap.c                  | 57 ++++++++++++++++++++++++
 tools/perf/lib/evlist.c                  |  1 +
 tools/perf/lib/include/internal/evlist.h |  1 +
 tools/perf/lib/include/perf/cpumap.h     |  2 +
 tools/perf/tests/builtin-test.c          |  5 +++
 tools/perf/tests/cpumap.c                | 16 +++++++
 tools/perf/tests/tests.h                 |  1 +
 7 files changed, 83 insertions(+)
tools/perf/lib/cpumap.c +57 -0
index d81656b4635e..f93f4e703e4c 100644
@@ -286,3 +286,60 @@ int perf_cpu_map__max(struct perf_cpu_map *map)
 
 	return max;
 }
+
+/*
+ * Merge two cpumaps
+ *
+ * orig either gets freed and replaced with a new map, or reused
+ * with no reference count change (similar to "realloc")
+ * other has its reference count increased.
+ */
+
+struct perf_cpu_map *perf_cpu_map__merge(struct perf_cpu_map *orig,
+					 struct perf_cpu_map *other)
+{
+	int *tmp_cpus;
+	int tmp_len;
+	int i, j, k;
+	struct perf_cpu_map *merged;
+
+	if (!orig && !other)
+		return NULL;
+	if (!orig) {
+		perf_cpu_map__get(other);
+		return other;
+	}
+	if (!other)
+		return orig;
+	if (orig->nr == other->nr &&
+	    !memcmp(orig->map, other->map, orig->nr * sizeof(int)))
+		return orig;
+
+	tmp_len = orig->nr + other->nr;
+	tmp_cpus = malloc(tmp_len * sizeof(int));
+	if (!tmp_cpus)
+		return NULL;
+
+	/* Standard merge algorithm from wikipedia */
+	i = j = k = 0;
+	while (i < orig->nr && j < other->nr) {
+		if (orig->map[i] <= other->map[j]) {
+			if (orig->map[i] == other->map[j])
+				j++;
+			tmp_cpus[k++] = orig->map[i++];
+		} else
+			tmp_cpus[k++] = other->map[j++];
+	}
+
+	while (i < orig->nr)
+		tmp_cpus[k++] = orig->map[i++];
+
+	while (j < other->nr)
+		tmp_cpus[k++] = other->map[j++];
+	assert(k <= tmp_len);
+
+	merged = cpu_map__trim_new(k, tmp_cpus);
+	free(tmp_cpus);
+	perf_cpu_map__put(orig);
+	return merged;
+}
tools/perf/lib/evlist.c +1 -0
index 205ddbb80bc1..ae9e65aa2491 100644
@@ -54,6 +54,7 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,
 
 	perf_thread_map__put(evsel->threads);
 	evsel->threads = perf_thread_map__get(evlist->threads);
+	evlist->all_cpus = perf_cpu_map__merge(evlist->all_cpus, evsel->cpus);
 }
 
 static void perf_evlist__propagate_maps(struct perf_evlist *evlist)
tools/perf/lib/include/internal/evlist.h +1 -0
index a2fbccf1922f..74dc8c3f0b66 100644
@@ -18,6 +18,7 @@ struct perf_evlist {
 	int			 nr_entries;
 	bool			 has_user_cpus;
 	struct perf_cpu_map	*cpus;
+	struct perf_cpu_map	*all_cpus;
 	struct perf_thread_map	*threads;
 	int			 nr_mmaps;
 	size_t			 mmap_len;
tools/perf/lib/include/perf/cpumap.h +2 -0
index ac9aa497f84a..6a17ad730cbc 100644
@@ -12,6 +12,8 @@ LIBPERF_API struct perf_cpu_map *perf_cpu_map__dummy_new(void);
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__new(const char *cpu_list);
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__read(FILE *file);
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__get(struct perf_cpu_map *map);
+LIBPERF_API struct perf_cpu_map *perf_cpu_map__merge(struct perf_cpu_map *orig,
+						     struct perf_cpu_map *other);
 LIBPERF_API void perf_cpu_map__put(struct perf_cpu_map *map);
 LIBPERF_API int perf_cpu_map__cpu(const struct perf_cpu_map *cpus, int idx);
 LIBPERF_API int perf_cpu_map__nr(const struct perf_cpu_map *cpus);
tools/perf/tests/builtin-test.c +5 -0
index 8b286e9b7549..5fa37cf7f283 100644
@@ -259,6 +259,11 @@ static struct test generic_tests[] = {
 		.desc = "Print cpu map",
 		.func = test__cpu_map_print,
 	},
+	{
+		.desc = "Merge cpu map",
+		.func = test__cpu_map_merge,
+	},
+
 	{
 		.desc = "Probe SDT events",
 		.func = test__sdt_event,
tools/perf/tests/cpumap.c +16 -0
index 8a0d236202b0..4ac56741ac5f 100644
@@ -120,3 +120,19 @@ int test__cpu_map_print(struct test *test __maybe_unused, int subtest __maybe_un
 	TEST_ASSERT_VAL("failed to convert map", cpu_map_print("1-10,12-20,22-30,32-40"));
 	return 0;
 }
+
+int test__cpu_map_merge(struct test *test __maybe_unused, int subtest __maybe_unused)
+{
+	struct perf_cpu_map *a = perf_cpu_map__new("4,2,1");
+	struct perf_cpu_map *b = perf_cpu_map__new("4,5,7");
+	struct perf_cpu_map *c = perf_cpu_map__merge(a, b);
+	char buf[100];
+
+	TEST_ASSERT_VAL("failed to merge map: bad nr", c->nr == 5);
+	cpu_map__snprint(c, buf, sizeof(buf));
+	TEST_ASSERT_VAL("failed to merge map: bad result", !strcmp(buf, "1-2,4-5,7"));
+	perf_cpu_map__put(a);
+	perf_cpu_map__put(b);
+	perf_cpu_map__put(c);
+	return 0;
+}
tools/perf/tests/tests.h +1 -0
index 9837b6e93023..44b184fd869f 100644
@@ -98,6 +98,7 @@ int test__event_update(struct test *test, int subtest);
 int test__event_times(struct test *test, int subtest);
 int test__backward_ring_buffer(struct test *test, int subtest);
 int test__cpu_map_print(struct test *test, int subtest);
+int test__cpu_map_merge(struct test *test, int subtest);
 int test__sdt_event(struct test *test, int subtest);
 int test__is_printable_array(struct test *test, int subtest);
 int test__bitmap_print(struct test *test, int subtest);
Signature · 1 line
2.23.0
author
#5 lore raw

PATCH v6 5/12 perf evsel: Add iterator to iterate over events ordered by CPU

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Add some common code that is needed to iterate over all events in CPU order. Used in followon patches

---

v2: Add cpumap__for_each_cpu macro to factor out some common code
v3: Drop cpumap__for_each_cpu macro again, replace with evlist__for_each_cpu Add new evlist__for_each_cpu
Don't compute cpus nr in cpu_index iterator init, just use all_cpus v4:
Remove __next, move into skip
Add _no_inc
Move initialization into iterator macro
Rename cpu_index to cpu_iter

---
 tools/perf/util/cpumap.h |  1 +
 tools/perf/util/evlist.c | 32 ++++++++++++++++++++++++++++++++
 tools/perf/util/evlist.h |  8 ++++++++
 tools/perf/util/evsel.h  |  1 +
 4 files changed, 42 insertions(+)
tools/perf/util/cpumap.h +1 -0
index 2553bef1279d..dbc1d7e949ed 100644
@@ -60,4 +60,5 @@ int cpu_map__build_map(struct perf_cpu_map *cpus, struct perf_cpu_map **res,
 
 int cpu_map__cpu(struct perf_cpu_map *cpus, int idx);
 bool cpu_map__has(struct perf_cpu_map *cpus, int cpu);
+
 #endif /* __PERF_CPUMAP_H */
tools/perf/util/evlist.c +32 -0
index fdce590d2278..dae6e846b2f8 100644
@@ -342,6 +342,38 @@ static int perf_evlist__nr_threads(struct evlist *evlist,
 		return perf_thread_map__nr(evlist->core.threads);
 }
 
+void evlist__cpu_iter_start(struct evlist *evlist)
+{
+	struct evsel *pos;
+
+	/*
+	 * Reset the per evsel cpu_iter. This is needed because
+	 * each evsel's cpumap may have a different index space,
+	 * and some operations need the index to modify
+	 * the FD xyarray (e.g. open, close)
+	 */
+	evlist__for_each_entry(evlist, pos)
+		pos->cpu_iter = 0;
+}
+
+bool evsel__cpu_iter_skip_no_inc(struct evsel *ev, int cpu)
+{
+	if (ev->cpu_iter >= ev->core.cpus->nr)
+		return true;
+	if (cpu >= 0 && ev->core.cpus->map[ev->cpu_iter] != cpu)
+		return true;
+	return false;
+}
+
+bool evsel__cpu_iter_skip(struct evsel *ev, int cpu)
+{
+	if (!evsel__cpu_iter_skip_no_inc(ev, cpu)) {
+		ev->cpu_iter++;
+		return false;
+	}
+	return true;
+}
+
 void evlist__disable(struct evlist *evlist)
 {
 	struct evsel *pos;
tools/perf/util/evlist.h +8 -0
index 13051409fd22..12606efc1f7c 100644
@@ -333,9 +333,17 @@ void perf_evlist__to_front(struct evlist *evlist,
 #define evlist__for_each_entry_safe(evlist, tmp, evsel) \
 	__evlist__for_each_entry_safe(&(evlist)->core.entries, tmp, evsel)
 
+#define evlist__for_each_cpu(evlist, index, cpu)	\
+	evlist__cpu_iter_start(evlist);			\
+	perf_cpu_map__for_each_cpu (cpu, index, (evlist)->core.all_cpus)
+
 void perf_evlist__set_tracking_event(struct evlist *evlist,
 				     struct evsel *tracking_evsel);
 
+void evlist__cpu_iter_start(struct evlist *evlist);
+bool evsel__cpu_iter_skip(struct evsel *ev, int cpu);
+bool evsel__cpu_iter_skip_no_inc(struct evsel *ev, int cpu);
+
 struct evsel *
 perf_evlist__find_evsel_by_str(struct evlist *evlist, const char *str);
 
tools/perf/util/evsel.h +1 -0
index ddc5ee6f6592..b10d5ba21966 100644
@@ -95,6 +95,7 @@ struct evsel {
 	bool			collect_stat;
 	bool			weak_group;
 	bool			percore;
+	int			cpu_iter;
 	const char		*pmu_name;
 	struct {
 		perf_evsel__sb_cb_t	*cb;
Signature · 1 line
2.23.0
author
#6 lore raw

PATCH v6 6/12 perf evsel: Add functions to close evsel on a CPU

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Refactor the existing all CPU function to use the per CPU close internally.

Export APIs to close per CPU.

---
 tools/perf/lib/evsel.c              | 27 +++++++++++++++++++++------
 tools/perf/lib/include/perf/evsel.h |  1 +
 2 files changed, 22 insertions(+), 6 deletions(-)
tools/perf/lib/evsel.c +21 -6
index 5a89857b0381..ea775dacbd2d 100644
@@ -114,16 +114,23 @@ int perf_evsel__open(struct perf_evsel *evsel, struct perf_cpu_map *cpus,
 	return err;
 }
 
+static void perf_evsel__close_fd_cpu(struct perf_evsel *evsel, int cpu)
+{
+	int thread;
+
+	for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
+		if (FD(evsel, cpu, thread) >= 0)
+			close(FD(evsel, cpu, thread));
+		FD(evsel, cpu, thread) = -1;
+	}
+}
+
 void perf_evsel__close_fd(struct perf_evsel *evsel)
 {
-	int cpu, thread;
+	int cpu;
 
 	for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++)
-		for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
-			if (FD(evsel, cpu, thread) >= 0)
-				close(FD(evsel, cpu, thread));
-			FD(evsel, cpu, thread) = -1;
-		}
+		perf_evsel__close_fd_cpu(evsel, cpu);
 }
 
 void perf_evsel__free_fd(struct perf_evsel *evsel)
@@ -141,6 +148,14 @@ void perf_evsel__close(struct perf_evsel *evsel)
 	perf_evsel__free_fd(evsel);
 }
 
+void perf_evsel__close_cpu(struct perf_evsel *evsel, int cpu)
+{
+	if (evsel->fd == NULL)
+		return;
+
+	perf_evsel__close_fd_cpu(evsel, cpu);
+}
+
 int perf_evsel__read_size(struct perf_evsel *evsel)
 {
 	u64 read_format = evsel->attr.read_format;
tools/perf/lib/include/perf/evsel.h +1 -0
index 557f5815a9c9..e7add554f861 100644
@@ -26,6 +26,7 @@ LIBPERF_API void perf_evsel__delete(struct perf_evsel *evsel);
 LIBPERF_API int perf_evsel__open(struct perf_evsel *evsel, struct perf_cpu_map *cpus,
 				 struct perf_thread_map *threads);
 LIBPERF_API void perf_evsel__close(struct perf_evsel *evsel);
+LIBPERF_API void perf_evsel__close_cpu(struct perf_evsel *evsel, int cpu);
 LIBPERF_API int perf_evsel__read(struct perf_evsel *evsel, int cpu, int thread,
 				 struct perf_counts_values *count);
 LIBPERF_API int perf_evsel__enable(struct perf_evsel *evsel);
Signature · 1 line
2.23.0
author
#7 lore raw

PATCH v6 7/12 perf stat: Use affinity for closing file descriptors

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Closing a perf fd can also trigger an IPI to the target CPU. Use the same affinity technique as we use for reading/enabling events to closing to optimize the CPU transitions.

Before on a large test case with 94 CPUs:

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
32.56 3.085463 50 61483 close

After:

10.54 0.735704 11 61485 close

---

v2: Use new iterator macros
v3: Use new iterator macros
Add missing affinity__cleanup
v4:
Update iterators again
v5:
Add comments

---
 tools/perf/util/evlist.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
tools/perf/util/evlist.c +29 -2
index dae6e846b2f8..7db49a0a0350 100644
@@ -18,6 +18,7 @@
 #include "debug.h"
 #include "units.h"
 #include <internal/lib.h> // page_size
+#include "affinity.h"
 #include "../perf.h"
 #include "asm/bug.h"
 #include "bpf-event.h"
@@ -1169,9 +1170,35 @@ void perf_evlist__set_selected(struct evlist *evlist,
 void evlist__close(struct evlist *evlist)
 {
 	struct evsel *evsel;
+	struct affinity affinity;
+	int cpu, i;
 
-	evlist__for_each_entry_reverse(evlist, evsel)
-		evsel__close(evsel);
+	/*
+	 * With perf record core.cpus is usually NULL.
+	 * Use the old method to handle this for now.
+	 */
+	if (!evlist->core.cpus) {
+		evlist__for_each_entry_reverse(evlist, evsel)
+			evsel__close(evsel);
+		return;
+	}
+
+	if (affinity__setup(&affinity) < 0)
+		return;
+	evlist__for_each_cpu (evlist, i, cpu) {
+		affinity__set(&affinity, cpu);
+
+		evlist__for_each_entry_reverse(evlist, evsel) {
+			if (evsel__cpu_iter_skip(evsel, cpu))
+			    continue;
+			perf_evsel__close_cpu(&evsel->core, evsel->cpu_iter - 1);
+		}
+	}
+	affinity__cleanup(&affinity);
+	evlist__for_each_entry_reverse(evlist, evsel) {
+		perf_evsel__free_fd(&evsel->core);
+		perf_evsel__free_id(&evsel->core);
+	}
 }
 
 static int perf_evlist__create_syswide_maps(struct evlist *evlist)
Signature · 1 line
2.23.0
author
#8 lore raw

PATCH v6 8/12 perf stat: Factor out open error handling

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Factor out the open error handling into a separate function. This is useful for followon patches who need to duplicate this.

No behavior change intended.

---
 tools/perf/builtin-stat.c | 100 +++++++++++++++++++++++---------------
 1 file changed, 60 insertions(+), 40 deletions(-)
tools/perf/builtin-stat.c +60 -40
index c88d4e118409..1a586009e5a7 100644
@@ -420,6 +420,57 @@ static bool is_target_alive(struct target *_target,
 	return false;
 }
 
+enum counter_recovery {
+	COUNTER_SKIP,
+	COUNTER_RETRY,
+	COUNTER_FATAL,
+};
+
+static enum counter_recovery stat_handle_error(struct evsel *counter)
+{
+	char msg[BUFSIZ];
+	/*
+	 * PPC returns ENXIO for HW counters until 2.6.37
+	 * (behavior changed with commit b0a873e).
+	 */
+	if (errno == EINVAL || errno == ENOSYS ||
+	    errno == ENOENT || errno == EOPNOTSUPP ||
+	    errno == ENXIO) {
+		if (verbose > 0)
+			ui__warning("%s event is not supported by the kernel.\n",
+				    perf_evsel__name(counter));
+		counter->supported = false;
+
+		if ((counter->leader != counter) ||
+		    !(counter->leader->core.nr_members > 1))
+			return COUNTER_SKIP;
+	} else if (perf_evsel__fallback(counter, errno, msg, sizeof(msg))) {
+		if (verbose > 0)
+			ui__warning("%s\n", msg);
+		return COUNTER_RETRY;
+	} else if (target__has_per_thread(&target) &&
+		   evsel_list->core.threads &&
+		   evsel_list->core.threads->err_thread != -1) {
+		/*
+		 * For global --per-thread case, skip current
+		 * error thread.
+		 */
+		if (!thread_map__remove(evsel_list->core.threads,
+					evsel_list->core.threads->err_thread)) {
+			evsel_list->core.threads->err_thread = -1;
+			return COUNTER_RETRY;
+		}
+	}
+
+	perf_evsel__open_strerror(counter, &target,
+				  errno, msg, sizeof(msg));
+	ui__error("%s\n", msg);
+
+	if (child_pid != -1)
+		kill(child_pid, SIGTERM);
+	return COUNTER_FATAL;
+}
+
 static int __run_perf_stat(int argc, const char **argv, int run_idx)
 {
 	int interval = stat_config.interval;
@@ -469,47 +520,16 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 				goto try_again;
 			}
 
-			/*
-			 * PPC returns ENXIO for HW counters until 2.6.37
-			 * (behavior changed with commit b0a873e).
-			 */
-			if (errno == EINVAL || errno == ENOSYS ||
-			    errno == ENOENT || errno == EOPNOTSUPP ||
-			    errno == ENXIO) {
-				if (verbose > 0)
-					ui__warning("%s event is not supported by the kernel.\n",
-						    perf_evsel__name(counter));
-				counter->supported = false;
-
-				if ((counter->leader != counter) ||
-				    !(counter->leader->core.nr_members > 1))
-					continue;
-			} else if (perf_evsel__fallback(counter, errno, msg, sizeof(msg))) {
-                                if (verbose > 0)
-                                        ui__warning("%s\n", msg);
-                                goto try_again;
-			} else if (target__has_per_thread(&target) &&
-				   evsel_list->core.threads &&
-				   evsel_list->core.threads->err_thread != -1) {
-				/*
-				 * For global --per-thread case, skip current
-				 * error thread.
-				 */
-				if (!thread_map__remove(evsel_list->core.threads,
-							evsel_list->core.threads->err_thread)) {
-					evsel_list->core.threads->err_thread = -1;
-					goto try_again;
-				}
+			switch (stat_handle_error(counter)) {
+			case COUNTER_FATAL:
+				return -1;
+			case COUNTER_RETRY:
+				goto try_again;
+			case COUNTER_SKIP:
+				continue;
+			default:
+				break;
 			}
-
-			perf_evsel__open_strerror(counter, &target,
-						  errno, msg, sizeof(msg));
-			ui__error("%s\n", msg);
-
-			if (child_pid != -1)
-				kill(child_pid, SIGTERM);
-
-			return -1;
 		}
 		counter->supported = true;
 
Signature · 1 line
2.23.0
author
#9 lore raw

PATCH v6 9/12 perf stat: Use affinity for opening events

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Restructure the event opening in perf stat to cycle through the events by CPU after setting affinity to that CPU. This eliminates IPI overhead in the perf API.

We have to loop through the CPU in the outter builtin-stat code instead of leaving that to low level functions.

It has to change the weak group fallback strategy slightly. Since we cannot easily undo the opens for other CPUs move the weak group retry to a separate loop.

Before with a large test case with 94 CPUs:

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
42.75 4.050910 67 60046 110 perf_event_open

After:

26.86 0.944396 16 58069 110 perf_event_open

(the number changes slightly because the weak group retries work differently and the test case relies on weak groups)

---

v2: Use new iterator macros.
Fix bug that caused unnecessary retry for errored events. Add extra assert to check assumption that cpumaps are always subsets v3:
Use new iterator macros
Factored out code movement for error handling.
v4:
Update iterator macros again
Fix minor bug with errored events
v5:
Add comments. Remove redundant iterator start.
Merge evsel open patch into this one again to avoid broke immediate.

---
 tools/perf/builtin-record.c    |   2 +-
 tools/perf/builtin-stat.c      | 121 +++++++++++++++++++++++++++------
 tools/perf/tests/event-times.c |   4 +-
 tools/perf/util/evlist.c       |  10 ++-
 tools/perf/util/evlist.h       |   3 +-
 tools/perf/util/evsel.c        |  18 +++--
 tools/perf/util/evsel.h        |   5 +-
 tools/perf/util/stat.c         |   5 +-
 tools/perf/util/stat.h         |   3 +-
 9 files changed, 137 insertions(+), 34 deletions(-)
tools/perf/builtin-record.c +1 -1
index 2fb83aabbef5..9f8a9393ce4a 100644
@@ -776,7 +776,7 @@ static int record__open(struct record *rec)
 			if ((errno == EINVAL || errno == EBADF) &&
 			    pos->leader != pos &&
 			    pos->weak_group) {
-			        pos = perf_evlist__reset_weak_group(evlist, pos);
+			        pos = perf_evlist__reset_weak_group(evlist, pos, true);
 				goto try_again;
 			}
 			rc = -errno;
tools/perf/builtin-stat.c +102 -19

150 lines not on this page · raw message

tools/perf/tests/event-times.c +2 -2
index 1ee8704e2284..1e8a9f5c356d 100644
@@ -125,7 +125,7 @@ static int attach__cpu_disabled(struct evlist *evlist)
 
 	evsel->core.attr.disabled = 1;
 
-	err = perf_evsel__open_per_cpu(evsel, cpus);
+	err = perf_evsel__open_per_cpu(evsel, cpus, -1);
 	if (err) {
 		if (err == -EACCES)
 			return TEST_SKIP;
@@ -152,7 +152,7 @@ static int attach__cpu_enabled(struct evlist *evlist)
 		return -1;
 	}
 
-	err = perf_evsel__open_per_cpu(evsel, cpus);
+	err = perf_evsel__open_per_cpu(evsel, cpus, -1);
 	if (err == -EACCES)
 		return TEST_SKIP;
 
tools/perf/util/evlist.c +8 -2
index 7db49a0a0350..17960e4d3a45 100644
@@ -1636,7 +1636,8 @@ void perf_evlist__force_leader(struct evlist *evlist)
 }
 
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evsel_list,
-						 struct evsel *evsel)
+						 struct evsel *evsel,
+						bool close)
 {
 	struct evsel *c2, *leader;
 	bool is_open = true;
@@ -1653,10 +1654,15 @@ struct evsel *perf_evlist__reset_weak_group(struct evlist *evsel_list,
 		if (c2 == evsel)
 			is_open = false;
 		if (c2->leader == leader) {
-			if (is_open)
+			if (is_open && close)
 				perf_evsel__close(&c2->core);
 			c2->leader = c2;
 			c2->core.nr_members = 0;
+			/*
+			 * Set this for all former members of the group
+			 * to indicate they get reopened.
+			 */
+			c2->reset_group = true;
 		}
 	}
 	return leader;
tools/perf/util/evlist.h +2 -1
index 12606efc1f7c..ad77091d1e1e 100644
@@ -355,5 +355,6 @@ bool perf_evlist__exclude_kernel(struct evlist *evlist);
 void perf_evlist__force_leader(struct evlist *evlist);
 
 struct evsel *perf_evlist__reset_weak_group(struct evlist *evlist,
-						 struct evsel *evsel);
+						 struct evsel *evsel,
+						bool close);
 #endif /* __PERF_EVLIST_H */
tools/perf/util/evsel.c +13 -5
index d4451846af93..7106f9a067df 100644
@@ -1569,8 +1569,9 @@ static int perf_event_open(struct evsel *evsel,
 	return fd;
 }
 
-int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
-		struct perf_thread_map *threads)
+static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
+		struct perf_thread_map *threads,
+		int start_cpu, int end_cpu)
 {
 	int cpu, thread, nthreads;
 	unsigned long flags = PERF_FLAG_FD_CLOEXEC;
@@ -1647,7 +1648,7 @@ int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
 
 	display_attr(&evsel->core.attr);
 
-	for (cpu = 0; cpu < cpus->nr; cpu++) {
+	for (cpu = start_cpu; cpu < end_cpu; cpu++) {
 
 		for (thread = 0; thread < nthreads; thread++) {
 			int fd, group_fd;
@@ -1825,6 +1826,12 @@ int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
 	return err;
 }
 
+int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
+		struct perf_thread_map *threads)
+{
+	return evsel__open_cpu(evsel, cpus, threads, 0, cpus ? cpus->nr : 1);
+}
+
 void evsel__close(struct evsel *evsel)
 {
 	perf_evsel__close(&evsel->core);
@@ -1832,9 +1839,10 @@ void evsel__close(struct evsel *evsel)
 }
 
 int perf_evsel__open_per_cpu(struct evsel *evsel,
-			     struct perf_cpu_map *cpus)
+			     struct perf_cpu_map *cpus,
+			     int cpu)
 {
-	return evsel__open(evsel, cpus, NULL);
+	return evsel__open_cpu(evsel, cpus, NULL, cpu, cpu + 1);
 }
 
 int perf_evsel__open_per_thread(struct evsel *evsel,
tools/perf/util/evsel.h +4 -1
index b10d5ba21966..ca82a93960cd 100644
@@ -94,6 +94,8 @@ struct evsel {
 	struct evsel		*metric_leader;
 	bool			collect_stat;
 	bool			weak_group;
+	bool			reset_group;
+	bool			errored;
 	bool			percore;
 	int			cpu_iter;
 	const char		*pmu_name;
@@ -223,7 +225,8 @@ int evsel__enable(struct evsel *evsel);
 int evsel__disable(struct evsel *evsel);
 
 int perf_evsel__open_per_cpu(struct evsel *evsel,
-			     struct perf_cpu_map *cpus);
+			     struct perf_cpu_map *cpus,
+			     int cpu);
 int perf_evsel__open_per_thread(struct evsel *evsel,
 				struct perf_thread_map *threads);
 int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
tools/perf/util/stat.c +3 -2
index 6822e4ffe224..3aebe732e886 100644
@@ -463,7 +463,8 @@ size_t perf_event__fprintf_stat_config(union perf_event *event, FILE *fp)
 
 int create_perf_stat_counter(struct evsel *evsel,
 			     struct perf_stat_config *config,
-			     struct target *target)
+			     struct target *target,
+			     int cpu)
 {
 	struct perf_event_attr *attr = &evsel->core.attr;
 	struct evsel *leader = evsel->leader;
@@ -517,7 +518,7 @@ int create_perf_stat_counter(struct evsel *evsel,
 	}
 
 	if (target__has_cpu(target) && !target__has_per_thread(target))
-		return perf_evsel__open_per_cpu(evsel, evsel__cpus(evsel));
+		return perf_evsel__open_per_cpu(evsel, evsel__cpus(evsel), cpu);
 
 	return perf_evsel__open_per_thread(evsel, evsel->core.threads);
 }
tools/perf/util/stat.h +2 -1
index 081c4a5113c6..4c9a7b68c3e7 100644
@@ -213,7 +213,8 @@ size_t perf_event__fprintf_stat_config(union perf_event *event, FILE *fp);
 
 int create_perf_stat_counter(struct evsel *evsel,
 			     struct perf_stat_config *config,
-			     struct target *target);
+			     struct target *target,
+			     int cpu);
 void
 perf_evlist__print_counters(struct evlist *evlist,
 			    struct perf_stat_config *config,
Signature · 1 line
2.23.0
author
#10 lore raw

PATCH v6 10/12 perf stat: Use affinity for reading

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Restructure event reading to use affinity to minimize the number of IPIs needed.

Before on a large test case with 94 CPUs:

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
3.16 0.106079 4 22082 read

After:

3.43 0.081295 3 22082 read

---

v2: Use new iterator macros
v3: Use new iterator macros
v4: Change iterator macros even more
v5: Preserve counter->err in all cases

---
 tools/perf/builtin-stat.c | 95 ++++++++++++++++++++++-----------------
 tools/perf/util/evsel.h   |  1 +
 2 files changed, 55 insertions(+), 41 deletions(-)
tools/perf/builtin-stat.c +54 -41
index 039aefb07777..7784f5a93944 100644
@@ -266,15 +266,10 @@ static int read_single_counter(struct evsel *counter, int cpu,
  * Read out the results of a single counter:
  * do not aggregate counts across CPUs in system-wide mode
  */
-static int read_counter(struct evsel *counter, struct timespec *rs)
+static int read_counter(struct evsel *counter, struct timespec *rs, int cpu)
 {
 	int nthreads = perf_thread_map__nr(evsel_list->core.threads);
-	int ncpus, cpu, thread;
-
-	if (target__has_cpu(&target) && !target__has_per_thread(&target))
-		ncpus = perf_evsel__nr_cpus(counter);
-	else
-		ncpus = 1;
+	int thread;
 
 	if (!counter->supported)
 		return -ENOENT;
@@ -283,40 +278,38 @@ static int read_counter(struct evsel *counter, struct timespec *rs)
 		nthreads = 1;
 
 	for (thread = 0; thread < nthreads; thread++) {
-		for (cpu = 0; cpu < ncpus; cpu++) {
-			struct perf_counts_values *count;
-
-			count = perf_counts(counter->counts, cpu, thread);
-
-			/*
-			 * The leader's group read loads data into its group members
-			 * (via perf_evsel__read_counter) and sets threir count->loaded.
-			 */
-			if (!perf_counts__is_loaded(counter->counts, cpu, thread) &&
-			    read_single_counter(counter, cpu, thread, rs)) {
-				counter->counts->scaled = -1;
-				perf_counts(counter->counts, cpu, thread)->ena = 0;
-				perf_counts(counter->counts, cpu, thread)->run = 0;
-				return -1;
-			}
+		struct perf_counts_values *count;
 
-			perf_counts__set_loaded(counter->counts, cpu, thread, false);
+		count = perf_counts(counter->counts, cpu, thread);
 
-			if (STAT_RECORD) {
-				if (perf_evsel__write_stat_event(counter, cpu, thread, count)) {
-					pr_err("failed to write stat event\n");
-					return -1;
-				}
-			}
+		/*
+		 * The leader's group read loads data into its group members
+		 * (via perf_evsel__read_counter) and sets threir count->loaded.
+		 */
+		if (!perf_counts__is_loaded(counter->counts, cpu, thread) &&
+		    read_single_counter(counter, cpu, thread, rs)) {
+			counter->counts->scaled = -1;
+			perf_counts(counter->counts, cpu, thread)->ena = 0;
+			perf_counts(counter->counts, cpu, thread)->run = 0;
+			return -1;
+		}
+
+		perf_counts__set_loaded(counter->counts, cpu, thread, false);
 
-			if (verbose > 1) {
-				fprintf(stat_config.output,
-					"%s: %d: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n",
-						perf_evsel__name(counter),
-						cpu,
-						count->val, count->ena, count->run);
+		if (STAT_RECORD) {
+			if (perf_evsel__write_stat_event(counter, cpu, thread, count)) {
+				pr_err("failed to write stat event\n");
+				return -1;
 			}
 		}
+
+		if (verbose > 1) {
+			fprintf(stat_config.output,
+				"%s: %d: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n",
+					perf_evsel__name(counter),
+					cpu,
+					count->val, count->ena, count->run);
+		}
 	}
 
 	return 0;
@@ -325,15 +318,35 @@ static int read_counter(struct evsel *counter, struct timespec *rs)
 static void read_counters(struct timespec *rs)
 {
 	struct evsel *counter;
-	int ret;
+	struct affinity affinity;
+	int i, ncpus, cpu;
+
+	if (affinity__setup(&affinity) < 0)
+		return;
+
+	ncpus = evsel_list->core.all_cpus->nr;
+	if (!(target__has_cpu(&target) && !target__has_per_thread(&target)))
+		ncpus = 1;
+	evlist__for_each_cpu (evsel_list, i, cpu) {
+		if (i >= ncpus)
+			break;
+		affinity__set(&affinity, cpu);
+
+		evlist__for_each_entry(evsel_list, counter) {
+			if (evsel__cpu_iter_skip(counter, cpu))
+				continue;
+			if (!counter->err)
+				counter->err = read_counter(counter, rs, counter->cpu_iter - 1);
+		}
+	}
+	affinity__cleanup(&affinity);
 
 	evlist__for_each_entry(evsel_list, counter) {
-		ret = read_counter(counter, rs);
-		if (ret)
+		if (counter->err)
 			pr_debug("failed to read counter %s\n", counter->name);
-
-		if (ret == 0 && perf_stat_process_counter(&stat_config, counter))
+		if (counter->err == 0 && perf_stat_process_counter(&stat_config, counter))
 			pr_warning("failed to process counter %s\n", counter->name);
+		counter->err = 0;
 	}
 }
 
tools/perf/util/evsel.h +1 -0
index ca82a93960cd..c8af4bc23f8f 100644
@@ -86,6 +86,7 @@ struct evsel {
 	struct list_head	config_terms;
 	struct bpf_object	*bpf_obj;
 	int			bpf_fd;
+	int			err;
 	bool			auto_merge_stats;
 	bool			merged_stat;
 	const char *		metric_expr;
Signature · 1 line
2.23.0
#11 lore raw

Re: [PATCH v6 10/12] perf stat: Use affinity for reading

Quoted 33 lines · Andi Kleen

From: Andi Kleen <[email protected]>

Restructure event reading to use affinity to minimize the number of IPIs needed.

Before on a large test case with 94 CPUs:

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
3.16 0.106079 4 22082 read

After:

3.43 0.081295 3 22082 read

---

v2: Use new iterator macros
v3: Use new iterator macros
v4: Change iterator macros even more
v5: Preserve counter->err in all cases

---
 tools/perf/builtin-stat.c | 95 ++++++++++++++++++++++-----------------
 tools/perf/util/evsel.h   |  1 +
 2 files changed, 55 insertions(+), 41 deletions(-)
tools/perf/builtin-stat.c +0 -0
index 039aefb07777..7784f5a93944 100644

tools/perf/builtin-stat.c static int read_single_counter(struct evsel *counter, int cpu, · line 269

Quoted 5 lines
tools/perf/builtin-stat.c +1 -1
@@ -266,15 +266,10 @@ static int read_single_counter(struct evsel *counter, int cpu,
  * Read out the results of a single counter:
  * do not aggregate counts across CPUs in system-wide mode
  */
-static int read_counter(struct evsel *counter, struct timespec *rs)
+static int read_counter(struct evsel *counter, struct timespec *rs, int cpu)

please rename this to read_counter_cpu

thanks,
jirka

#12 lore raw

Re: [PATCH v6 10/12] perf stat: Use affinity for reading

In reply to Andi Kleen

On Mon, Nov 11, 2019 at 04:59:39PM -0800, Andi Kleen wrote:

SNIP

Quoted 19 lines
tools/perf/builtin-stat.c +3 -4
 	evlist__for_each_entry(evsel_list, counter) {
-		ret = read_counter(counter, rs);
-		if (ret)
+		if (counter->err)
 			pr_debug("failed to read counter %s\n", counter->name);
-
-		if (ret == 0 && perf_stat_process_counter(&stat_config, counter))
+		if (counter->err == 0 && perf_stat_process_counter(&stat_config, counter))
 			pr_warning("failed to process counter %s\n", counter->name);
+		counter->err = 0;
 	}
 }
tools/perf/util/evsel.h +0 -0
index ca82a93960cd..c8af4bc23f8f 100644

tools/perf/util/evsel.h struct evsel { · line 89

Quoted 4 lines
tools/perf/util/evsel.h +1 -0
@@ -86,6 +86,7 @@ struct evsel {
 	struct list_head	config_terms;
 	struct bpf_object	*bpf_obj;
 	int			bpf_fd;
+	int			err;

I was wondering what would be the best place for this, and all the previous variables u added and this one are stat specific, so I think this all belongs to

(struct perf_stat_evsel*) evsel->stat

jirka

#13 lore raw

Re: [PATCH v6 10/12] perf stat: Use affinity for reading

Quoted 14 lines

tools/perf/util/evsel.h struct evsel { · line 89

Quoted 9 lines
tools/perf/util/evsel.h +1 -0
index ca82a93960cd..c8af4bc23f8f 100644
@@ -86,6 +86,7 @@ struct evsel {
 	struct list_head	config_terms;
 	struct bpf_object	*bpf_obj;
 	int			bpf_fd;
+	int			err;

I was wondering what would be the best place for this, and all the previous variables u added and this one are stat specific, so I think this all belongs to

Quoted 1 line

(struct perf_stat_evsel*) evsel->stat

I hope to eventually make perf record use affinity too. Just not in this patchkit. So I'll keep them in the generic evsel for now.

-Andi

#14 lore raw

Re: [PATCH v6 10/12] perf stat: Use affinity for reading

In reply to Andi Kleen

On Mon, Nov 11, 2019 at 04:59:39PM -0800, Andi Kleen wrote:

SNIP

Quoted 6 lines
tools/perf/builtin-stat.c +0 -0
 	return 0;
@@ -325,15 +318,35 @@ static int read_counter(struct evsel *counter, struct timespec *rs)
 static void read_counters(struct timespec *rs)
 {
 	struct evsel *counter;

tools/perf/builtin-stat.c static int read_counter(struct evsel *counter, struct timespec *rs) · line 329

Quoted 10 lines
tools/perf/builtin-stat.c +9 -1
-	int ret;
+	struct affinity affinity;
+	int i, ncpus, cpu;
+
+	if (affinity__setup(&affinity) < 0)
+		return;
+
+	ncpus = evsel_list->core.all_cpus->nr;
+	if (!(target__has_cpu(&target) && !target__has_per_thread(&target)))
+		ncpus = 1;

hum, could we propagate the negation inside amke this more readable?

  if (!target__has_cpu(&target) || target__has_per_thread(&target))

jirka

Quoted 13 lines
tools/perf/builtin-stat.c +13 -0
+	evlist__for_each_cpu (evsel_list, i, cpu) {
+		if (i >= ncpus)
+			break;
+		affinity__set(&affinity, cpu);
+
+		evlist__for_each_entry(evsel_list, counter) {
+			if (evsel__cpu_iter_skip(counter, cpu))
+				continue;
+			if (!counter->err)
+				counter->err = read_counter(counter, rs, counter->cpu_iter - 1);
+		}
+	}
+	affinity__cleanup(&affinity);

SNIP

author
#15 lore raw

PATCH v6 11/12 perf evsel: Add functions to enable/disable for a specific CPU

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Refactor the existing functions to use these functions internally.

Used in the next patch

---
 tools/perf/lib/evsel.c              | 49 +++++++++++++++++++++--------
 tools/perf/lib/include/perf/evsel.h |  2 ++
 tools/perf/util/evsel.c             | 13 +++++++-
 tools/perf/util/evsel.h             |  2 ++
 4 files changed, 52 insertions(+), 14 deletions(-)
tools/perf/lib/evsel.c +36 -13
index ea775dacbd2d..89ddfade0b96 100644
@@ -198,38 +198,61 @@ int perf_evsel__read(struct perf_evsel *evsel, int cpu, int thread,
 }
 
 static int perf_evsel__run_ioctl(struct perf_evsel *evsel,
-				 int ioc,  void *arg)
+				 int ioc,  void *arg,
+				 int cpu)
 {
-	int cpu, thread;
+	int thread;
 
-	for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++) {
-		for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
-			int fd = FD(evsel, cpu, thread),
-			    err = ioctl(fd, ioc, arg);
+	for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
+		int fd = FD(evsel, cpu, thread),
+		    err = ioctl(fd, ioc, arg);
 
-			if (err)
-				return err;
-		}
+		if (err)
+			return err;
 	}
 
 	return 0;
 }
 
+int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu)
+{
+	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_ENABLE, 0, cpu);
+}
+
 int perf_evsel__enable(struct perf_evsel *evsel)
 {
-	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_ENABLE, 0);
+	int i;
+	int err = 0;
+
+	for (i = 0; i < evsel->cpus->nr && !err; i++)
+		err = perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_ENABLE, 0, i);
+	return err;
+}
+
+int perf_evsel__disable_cpu(struct perf_evsel *evsel, int cpu)
+{
+	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_DISABLE, 0, cpu);
 }
 
 int perf_evsel__disable(struct perf_evsel *evsel)
 {
-	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_DISABLE, 0);
+	int i;
+	int err = 0;
+
+	for (i = 0; i < evsel->cpus->nr && !err; i++)
+		err = perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_DISABLE, 0, i);
+	return err;
 }
 
 int perf_evsel__apply_filter(struct perf_evsel *evsel, const char *filter)
 {
-	return perf_evsel__run_ioctl(evsel,
+	int err = 0, i;
+
+	for (i = 0; i < evsel->cpus->nr && !err; i++)
+		err = perf_evsel__run_ioctl(evsel,
 				     PERF_EVENT_IOC_SET_FILTER,
-				     (void *)filter);
+				     (void *)filter, i);
+	return err;
 }
 
 struct perf_cpu_map *perf_evsel__cpus(struct perf_evsel *evsel)
tools/perf/lib/include/perf/evsel.h +2 -0
index e7add554f861..c82ec39a4ad0 100644
@@ -30,7 +30,9 @@ LIBPERF_API void perf_evsel__close_cpu(struct perf_evsel *evsel, int cpu);
 LIBPERF_API int perf_evsel__read(struct perf_evsel *evsel, int cpu, int thread,
 				 struct perf_counts_values *count);
 LIBPERF_API int perf_evsel__enable(struct perf_evsel *evsel);
+LIBPERF_API int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu);
 LIBPERF_API int perf_evsel__disable(struct perf_evsel *evsel);
+LIBPERF_API int perf_evsel__disable_cpu(struct perf_evsel *evsel, int cpu);
 LIBPERF_API struct perf_cpu_map *perf_evsel__cpus(struct perf_evsel *evsel);
 LIBPERF_API struct perf_thread_map *perf_evsel__threads(struct perf_evsel *evsel);
 LIBPERF_API struct perf_event_attr *perf_evsel__attr(struct perf_evsel *evsel);
tools/perf/util/evsel.c +12 -1
index 7106f9a067df..2805d61ed725 100644
@@ -1205,16 +1205,27 @@ int perf_evsel__append_addr_filter(struct evsel *evsel, const char *filter)
 	return perf_evsel__append_filter(evsel, "%s,%s", filter);
 }
 
+/* Caller has to clear disabled after going through all CPUs. */
+int evsel__enable_cpu(struct evsel *evsel, int cpu)
+{
+	return perf_evsel__enable_cpu(&evsel->core, cpu);
+}
+
 int evsel__enable(struct evsel *evsel)
 {
 	int err = perf_evsel__enable(&evsel->core);
 
 	if (!err)
 		evsel->disabled = false;
-
 	return err;
 }
 
+/* Caller has to set disabled after going through all CPUs. */
+int evsel__disable_cpu(struct evsel *evsel, int cpu)
+{
+	return perf_evsel__disable_cpu(&evsel->core, cpu);
+}
+
 int evsel__disable(struct evsel *evsel)
 {
 	int err = perf_evsel__disable(&evsel->core);
tools/perf/util/evsel.h +2 -0
index c8af4bc23f8f..dc14f4a823cd 100644
@@ -222,8 +222,10 @@ int perf_evsel__set_filter(struct evsel *evsel, const char *filter);
 int perf_evsel__append_tp_filter(struct evsel *evsel, const char *filter);
 int perf_evsel__append_addr_filter(struct evsel *evsel,
 				   const char *filter);
+int evsel__enable_cpu(struct evsel *evsel, int cpu);
 int evsel__enable(struct evsel *evsel);
 int evsel__disable(struct evsel *evsel);
+int evsel__disable_cpu(struct evsel *evsel, int cpu);
 
 int perf_evsel__open_per_cpu(struct evsel *evsel,
 			     struct perf_cpu_map *cpus,
Signature · 1 line
2.23.0
#16 lore raw

Re: [PATCH v6 11/12] perf evsel: Add functions to enable/disable for a specific CPU

Quoted 40 lines · Andi Kleen

From: Andi Kleen <[email protected]>

Refactor the existing functions to use these functions internally.

Used in the next patch

---
 tools/perf/lib/evsel.c              | 49 +++++++++++++++++++++--------
 tools/perf/lib/include/perf/evsel.h |  2 ++
 tools/perf/util/evsel.c             | 13 +++++++-
 tools/perf/util/evsel.h             |  2 ++
 4 files changed, 52 insertions(+), 14 deletions(-)
tools/perf/lib/evsel.c +6 -9
index ea775dacbd2d..89ddfade0b96 100644
@@ -198,38 +198,61 @@ int perf_evsel__read(struct perf_evsel *evsel, int cpu, int thread,
 }
 
 static int perf_evsel__run_ioctl(struct perf_evsel *evsel,
-				 int ioc,  void *arg)
+				 int ioc,  void *arg,
+				 int cpu)
 {
-	int cpu, thread;
+	int thread;
 
-	for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++) {
-		for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
-			int fd = FD(evsel, cpu, thread),
-			    err = ioctl(fd, ioc, arg);
+	for (thread = 0; thread < xyarray__max_y(evsel->fd); thread++) {
+		int fd = FD(evsel, cpu, thread),
+		    err = ioctl(fd, ioc, arg);
 
-			if (err)
-				return err;
-		}

tools/perf/lib/evsel.c int perf_evsel__read(struct perf_evsel *evsel, int cpu, int thread, · line 219

Quoted 10 lines
tools/perf/lib/evsel.c +5 -0
+		if (err)
+			return err;
 	}
 
 	return 0;
 }
 
+int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu)
+{
+	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_ENABLE, 0, cpu);

please use NULL instead of 0, I initialy confused it for index

for all the calls perf_evsel__run_ioctl below

thanks,
jirka

Quoted 29 lines
tools/perf/lib/evsel.c +19 -2
+}
+
 int perf_evsel__enable(struct perf_evsel *evsel)
 {
-	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_ENABLE, 0);
+	int i;
+	int err = 0;
+
+	for (i = 0; i < evsel->cpus->nr && !err; i++)
+		err = perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_ENABLE, 0, i);
+	return err;
+}
+
+int perf_evsel__disable_cpu(struct perf_evsel *evsel, int cpu)
+{
+	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_DISABLE, 0, cpu);
 }
 
 int perf_evsel__disable(struct perf_evsel *evsel)
 {
-	return perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_DISABLE, 0);
+	int i;
+	int err = 0;
+
+	for (i = 0; i < evsel->cpus->nr && !err; i++)
+		err = perf_evsel__run_ioctl(evsel, PERF_EVENT_IOC_DISABLE, 0, i);
+	return err;
 }
 

SNIP

author
#17 lore raw

PATCH v6 12/12 perf stat: Use affinity for enabling/disabling events

In reply to Andi Kleen

From: Andi Kleen <[email protected]>

Restructure event enabling/disabling to use affinity, which minimizes the number of IPIs needed.

Before on a large test case with 94 CPUs:

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
54.65 1.899986 22 84812 660 ioctl

after:

39.21 0.930451 10 84796 644 ioctl

---

v2: Use new iterator macros
v3: Use new iterator macros
v4: Update iterators again

---
 tools/perf/util/evlist.c | 40 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 37 insertions(+), 3 deletions(-)
tools/perf/util/evlist.c +37 -3
index 17960e4d3a45..682a1f37d244 100644
@@ -378,11 +378,28 @@ bool evsel__cpu_iter_skip(struct evsel *ev, int cpu)
 void evlist__disable(struct evlist *evlist)
 {
 	struct evsel *pos;
+	struct affinity affinity;
+	int cpu, i;
+
+	if (affinity__setup(&affinity) < 0)
+		return;
+
+	evlist__for_each_cpu (evlist, i, cpu) {
+		affinity__set(&affinity, cpu);
 
+		evlist__for_each_entry(evlist, pos) {
+			if (evsel__cpu_iter_skip(pos, cpu))
+				continue;
+			if (pos->disabled || !perf_evsel__is_group_leader(pos) || !pos->core.fd)
+				continue;
+			evsel__disable_cpu(pos, pos->cpu_iter - 1);
+		}
+	}
+	affinity__cleanup(&affinity);
 	evlist__for_each_entry(evlist, pos) {
-		if (pos->disabled || !perf_evsel__is_group_leader(pos) || !pos->core.fd)
+		if (!perf_evsel__is_group_leader(pos) || !pos->core.fd)
 			continue;
-		evsel__disable(pos);
+		pos->disabled = true;
 	}
 
 	evlist->enabled = false;
@@ -391,11 +408,28 @@ void evlist__disable(struct evlist *evlist)
 void evlist__enable(struct evlist *evlist)
 {
 	struct evsel *pos;
+	struct affinity affinity;
+	int cpu, i;
 
+	if (affinity__setup(&affinity) < 0)
+		return;
+
+	evlist__for_each_cpu (evlist, i, cpu) {
+		affinity__set(&affinity, cpu);
+
+		evlist__for_each_entry(evlist, pos) {
+			if (evsel__cpu_iter_skip(pos, cpu))
+				continue;
+			if (!perf_evsel__is_group_leader(pos) || !pos->core.fd)
+				continue;
+			evsel__enable_cpu(pos, pos->cpu_iter - 1);
+		}
+	}
+	affinity__cleanup(&affinity);
 	evlist__for_each_entry(evlist, pos) {
 		if (!perf_evsel__is_group_leader(pos) || !pos->core.fd)
 			continue;
-		evsel__enable(pos);
+		pos->disabled = false;
 	}
 
 	evlist->enabled = true;
Signature · 1 line
2.23.0